[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w08 started "build eeze.spec" at Wed Jul 17 06:36:12 UTC 2013. [ 0s] [ 0s] Building eeze for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '3562e3358df09e9c75add3870f1df2b4' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/eeze.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/eeze.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/eeze.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 0s] [6/56] preinstalling bash... [ 0s] [7/56] preinstalling bzip2-libs... [ 0s] [8/56] preinstalling diffutils... [ 0s] [9/56] preinstalling elfutils-libelf... [ 0s] [10/56] preinstalling libattr... [ 0s] [11/56] preinstalling liblua... [ 0s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 1s] [28/56] preinstalling tar... [ 1s] [29/56] preinstalling coreutils... [ 1s] [30/56] preinstalling file... [ 1s] [31/56] preinstalling rpm... [ 1s] [32/56] preinstalling tizen-accelerator... [ 1s] [33/56] preinstalling rpm-libs... [ 1s] [34/56] preinstalling gmp-x86-arm... [ 1s] [35/56] preinstalling mpc-x86-arm... [ 1s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=unsafe -drive file=/srv/build/root_7/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_7/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 7s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[213]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 6925/2097152 files, 255825/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] [ 2.640152] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/eeze.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/eeze.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 10s] /bin/rpm [ 10s] /usr/bin/rpm2cpio [ 10s] /usr/bin/rpmdb [ 10s] /usr/bin/rpmquery [ 10s] /usr/bin/rpmsign [ 10s] /usr/bin/rpmverify [ 10s] running rpm-libs-x86-arm postinstall script [ 10s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 16s] [1/208] installing kernel-headers-3.0.15-1.1 [ 16s] [2/208] installing libX11-common-1.5.0-3.1 [ 16s] [3/208] installing opengl-es-virtual-drv-0.1.5-10.1 [ 16s] [4/208] installing tizen-release-2.2.0-1.1 [ 16s] [5/208] installing tzdata-2011h-1.1 [ 16s] [6/208] installing libgcc-4.5.3-1.2 [ 16s] [7/208] installing setup-0.1-1.1 [ 16s] [8/208] installing filesystem-0.1-1.1 [ 17s] warning: group lock does not exist - using root [ 17s] warning: group mail does not exist - using root [ 17s] [9/208] installing eglibc-2.13-1.9 [ 17s] [10/208] installing libstdc++-4.5.3-1.2 [ 17s] [11/208] installing eglibc-common-2.13-1.9 [ 18s] /var/tmp/rpm-tmp.0AJCD3: line 2: /usr/bin/xargs: No such file or directory [ 18s] [12/208] installing libstdc++-devel-4.5.3-1.2 [ 19s] [13/208] installing bash-4.1-3.1 [ 19s] [14/208] installing bzip2-libs-1.0.5-4.1 [ 19s] [15/208] installing cpio-2.8-3.1 [ 19s] [16/208] installing diffutils-3.0-3.1 [ 19s] [17/208] installing e2fsprogs-libs-1.41.9-2.6 [ 19s] [18/208] installing elfutils-libelf-0.152-1.7 [ 19s] [19/208] installing expat-2.0.1-8.1 [ 19s] [20/208] installing fdupes-1.40-42.1 [ 19s] [21/208] installing findutils-4.2.31-1.1 [ 19s] [22/208] installing fribidi-0.19.5-5.1 [ 19s] [23/208] installing gdbm-1.8.3-1.1 [ 20s] [24/208] installing kmod-5-4.1 [ 20s] [25/208] installing libICE-1.0.8-1.1 [ 20s] [26/208] installing libXau-1.0.7-1.1 [ 20s] [27/208] installing libattr-2.4.44-7.2 [ 20s] [28/208] installing libffi-3.0.9-100.1 [ 20s] [29/208] installing libgomp-4.5.3-1.2 [ 20s] [30/208] installing libidn-1.15-6.1 [ 20s] [31/208] installing libjpeg-turbo-1.2.0-8.1 [ 20s] [32/208] installing liblua-5.1.4-6.1 [ 20s] [33/208] installing libuuid-2.20.2-6.1 [ 20s] [34/208] installing lzo-2.03-1.1 [ 21s] [35/208] installing m4-1.4.14-1.1 [ 21s] [36/208] installing make-3.81-1.1 [ 21s] [37/208] installing net-tools-1.60-87.4 [ 21s] [38/208] installing nspr-4.8.7-1.6 [ 21s] [39/208] installing nss-softokn-freebl-3.12.9-3.10 [ 21s] [40/208] installing patch-2.6.1.169-1.1 [ 21s] [41/208] installing pixman-0.28.2-1.1 [ 21s] [42/208] installing pkgconfig-0.25-2.1 [ 21s] [43/208] installing popt-1.16-3.1 [ 21s] [44/208] installing readline-5.2-13.1 [ 21s] [45/208] installing sed-4.1.5-2.1 [ 21s] [46/208] installing smack-1.0slp2+s11-1.1 [ 22s] [47/208] installing sqlite-3.7.13-1.1 [ 22s] [48/208] installing xz-libs-5.0.3-1.1 [ 22s] [49/208] installing zlib-1.2.5-2.5 [ 22s] [50/208] installing gmp-5.0.1-1.1 [ 22s] [51/208] installing libpcre-7.7-3.1 [ 22s] [52/208] installing ncurses-libs-5.7-4.1 [ 22s] [53/208] installing build-compare-2009.10.14-26.5 [ 22s] [54/208] installing qemu.x86_64-1.2-1.1 [ 23s] [55/208] installing eglibc-headers-2.13-1.9 [ 23s] [56/208] installing fribidi-devel-0.19.5-5.1 [ 24s] [57/208] installing libcap-2.21-1.1 [ 24s] [58/208] installing pixman-devel-0.28.2-1.1 [ 24s] [59/208] installing unzip-6.0-9.3 [ 24s] [60/208] installing zlib-devel-1.2.5-2.5 [ 24s] [61/208] installing c-ares-1.7.4-2.1 [ 24s] [62/208] installing freetype-2.4.9-1.1 [ 24s] [63/208] installing grep-2.5.1a-62.1 [ 24s] [64/208] installing libacl-2.2.49-2.1 [ 24s] [65/208] installing libfile-5.04-1.1 [ 24s] [66/208] installing libpng-1.2.50-1.1 [ 24s] [67/208] installing libxcb-1.8.1-1.1 [ 25s] [68/208] installing lzo-minilzo-2.03-1.1 [ 25s] [69/208] installing mpfr-3.0.0-1.1 [ 25s] [70/208] installing ncurses-5.7-4.1 [ 25s] [71/208] installing binutils-2.22-1.1 [ 25s] [72/208] installing bzip2-1.0.5-4.1 [ 25s] [73/208] installing glib2-2.32.3-5.1 [ 25s] [74/208] installing libSM-1.2.1-1.1 [ 25s] [75/208] installing libblkid-2.20.2-6.1 [ 25s] [76/208] installing libicu-4.8-1.1 [ 26s] [77/208] installing smack-utils-1.0slp2+s11-1.1 [ 26s] [78/208] installing xz-5.0.3-1.1 [ 26s] [79/208] installing elfutils-libs-0.152-1.7 [ 26s] [80/208] installing nss-3.12.9-3.10 [ 26s] [81/208] installing perl-5.12.1-61.6 [ 27s] [82/208] installing ncurses-base-5.7-4.1 [ 27s] [83/208] installing perl-HTML-Tagset-3.20-8.1 [ 27s] [84/208] installing perl-IO-Compress-Base-2.008-61.6 [ 27s] [85/208] installing perl-Module-Pluggable-3.60-61.6 [ 27s] [86/208] installing perl-Pod-Escapes-1.04-61.6 [ 27s] [87/208] installing perl-TimeDate-1.20-1.1 [ 27s] [88/208] installing eglibc-devel-2.13-1.9 [ 28s] [89/208] installing lzo-devel-2.03-1.1 [ 28s] [90/208] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 28s] [91/208] installing perl-devel-5.12.1-61.6 [ 28s] [92/208] installing perl-libs-5.12.1-61.6 [ 28s] [93/208] installing tar-1.17-4.1 [ 28s] [94/208] installing coreutils-6.9-9.1 [ 28s] [95/208] installing file-5.04-1.1 [ 28s] [96/208] installing freetype-devel-2.4.9-1.1 [ 28s] [97/208] installing libX11-1.5.0-3.1 [ 28s] [98/208] installing libdlog-0.4.1-16.1 [ 28s] chown: `root:app_logging': invalid user [ 28s] [99/208] installing libmount-2.20.2-6.1 [ 29s] [100/208] installing mpc-0.9-1.1 [ 29s] [101/208] installing openssl-1.0.1c-1.11 [ 29s] [102/208] installing xz-lzma-compat-5.0.3-1.1 [ 29s] [103/208] installing elfutils-0.152-1.7 [ 29s] [104/208] installing nss-sysinit-3.12.9-3.10 [ 29s] [105/208] installing udev-182-6.1 [ 29s] [106/208] installing libdlog-devel-0.4.1-16.1 [ 29s] [107/208] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 29s] [108/208] installing perl-Pod-Simple-3.07-61.6 [ 29s] [109/208] installing perl-Test-Simple-0.80-61.6 [ 29s] [110/208] installing tizen-accelerator-1.0.1-1.1 [ 30s] [111/208] installing eina-1.7.1+svn.77445+build06-1.1 [ 30s] [112/208] installing libXcomposite-0.4.3-3.1 [ 30s] [113/208] installing libXext-1.3.1-1.1 [ 36s] [114/208] installing libXfixes-5.0-2.1 [ 36s] [115/208] installing libXrender-0.9.7-1.1 [ 36s] [116/208] installing libidn-devel-1.15-6.1 [ 36s] [117/208] installing libudev-182-6.1 [ 36s] [118/208] installing perl-IO-Compress-Zlib-2.008-61.6 [ 37s] [119/208] installing perl-Test-Harness-3.12-61.6 [ 37s] [120/208] installing gawk-3.1.5-1.1 [ 37s] [121/208] installing gzip-1.3.14-2.1 [ 37s] [122/208] installing build-2011.01.10a-1.1 [ 37s] [123/208] installing giflib-4.1.6-13.1 [ 37s] [124/208] installing libcurl-7.28.1-2.1 [ 37s] [125/208] installing cpp-4.5.3-1.2 [ 37s] [126/208] installing util-linux-2.20.2-6.1 [ 37s] warning: group tty does not exist - using root [ 37s] /bin/chown: `root:root': invalid user [ 37s] [127/208] installing fontconfig-2.9.0-2.1 [ 40s] [128/208] installing glib2-devel-2.32.3-5.1 [ 40s] [129/208] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 40s] [130/208] installing eglibc-x86-arm-2.13-9.1 [ 40s] [131/208] installing eina-devel-1.7.1+svn.77445+build06-1.1 [ 40s] [132/208] installing elfutils-libelf-x86-arm-0.152-9.1 [ 41s] [133/208] installing elfutils-libs-x86-arm-0.152-9.1 [ 41s] [134/208] installing fontconfig-devel-2.9.0-2.1 [ 41s] [135/208] installing gmp-x86-arm-5.0.1-9.1 [ 41s] [136/208] installing libacl-x86-arm-2.2.49-9.1 [ 41s] [137/208] installing libattr-x86-arm-2.4.44-9.1 [ 41s] [138/208] installing libcap-x86-arm-2.21-9.1 [ 42s] [139/208] installing libfile-x86-arm-5.04-9.1 [ 42s] [140/208] installing libgcc-x86-arm-4.5.3-9.1 [ 42s] [141/208] installing liblua-x86-arm-5.1.4-9.1 [ 42s] [142/208] installing libudev-devel-182-6.1 [ 42s] [143/208] installing mpc-x86-arm-0.9-9.1 [ 42s] [144/208] installing mpfr-x86-arm-3.0.0-9.1 [ 43s] [145/208] installing ncurses-libs-x86-arm-5.7-9.1 [ 43s] [146/208] installing nspr-x86-arm-4.8.7-9.1 [ 43s] [147/208] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 43s] [148/208] installing nss-x86-arm-3.12.9-9.1 [ 43s] [149/208] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 43s] [150/208] installing popt-x86-arm-1.16-9.1 [ 44s] [151/208] installing sqlite-x86-arm-3.7.13-9.1 [ 44s] [152/208] installing xz-libs-x86-arm-5.0.3-9.1 [ 44s] [153/208] installing zlib-x86-arm-1.2.5-7.1 [ 44s] [154/208] installing ecore-1.7.1+svn.77580+build25r02-3.1 [ 44s] [155/208] installing libXdamage-1.1.3-3.1 [ 44s] [156/208] installing libXgesture-0.1.1-3.1 [ 44s] [157/208] installing libXi-1.6.1-1.1 [ 44s] [158/208] installing libXinerama-1.1.2-1.1 [ 45s] [159/208] installing libcurl-devel-7.28.1-2.1 [ 45s] [160/208] installing eet-1.7.1+svn.77495slp2+build01-1.1 [ 45s] [161/208] installing libXcursor-1.1.13-1.1 [ 45s] [162/208] installing libXrandr-1.4.0-3.1 [ 45s] [163/208] installing curl-7.28.1-2.1 [ 45s] [164/208] installing cairo-1.12.12-6.1 [ 45s] [165/208] installing gcc-4.5.3-1.2 [ 45s] [166/208] installing perl-CPAN-1.9205-61.6 [ 45s] [167/208] installing bash-x86-arm-4.1-7.1 [ 46s] [168/208] installing eet-devel-1.7.1+svn.77495slp2+build01-1.1 [ 46s] [169/208] installing fdupes-x86-arm-1.40-9.1 [ 46s] [170/208] installing findutils-x86-arm-4.2.31-7.1 [ 46s] [171/208] installing gawk-x86-arm-3.1.5-7.1 [ 46s] [172/208] installing gzip-x86-arm-1.3.14-9.1 [ 46s] [173/208] installing make-x86-arm-3.81-8.1 [ 46s] [174/208] installing patch-x86-arm-2.6.1.169-7.1 [ 46s] [175/208] installing sed-x86-arm-4.1.5-9.1 [ 47s] /bin/sed.orig-arm already present - skipping. [ 47s] [176/208] installing diffutils-x86-arm-3.0-9.1 [ 47s] /usr/bin/cmp.orig-arm already present - skipping. [ 47s] /usr/bin/diff.orig-arm already present - skipping. [ 47s] /usr/bin/diff3.orig-arm already present - skipping. [ 47s] /usr/bin/sdiff.orig-arm already present - skipping. [ 47s] [177/208] installing ecore-imf-1.7.1+svn.77580+build25r02-3.1 [ 47s] [178/208] installing ecore-input-1.7.1+svn.77580+build25r02-3.1 [ 47s] [179/208] installing libXtst-1.2.0-3.1 [ 47s] [180/208] installing autoconf-2.68-1.1 [ 47s] [181/208] installing coreutils-x86-arm-6.9-7.1 [ 49s] [182/208] installing file-x86-arm-5.04-7.1 [ 49s] [183/208] installing tar-x86-arm-1.17-9.1 [ 49s] /bin/tar.orig-arm already present - skipping. [ 49s] [184/208] installing ecore-con-1.7.1+svn.77580+build25r02-3.1 [ 50s] [185/208] installing harfbuzz-0.9.7-1.1 [ 50s] [186/208] installing elfutils-x86-arm-0.152-7.2 [ 50s] [187/208] installing gcc-c++-4.5.3-1.2 [ 50s] [188/208] installing rpm-4.9.1-4.1 [ 50s] [189/208] installing harfbuzz-devel-0.9.7-1.1 [ 50s] [190/208] installing automake-1.11.1-3.1 [ 50s] [191/208] installing ecore-fb-1.7.1+svn.77580+build25r02-3.1 [ 51s] [192/208] installing ecore-file-1.7.1+svn.77580+build25r02-3.1 [ 51s] [193/208] installing ecore-ipc-1.7.1+svn.77580+build25r02-3.1 [ 51s] [194/208] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 52s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 52s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 52s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 52s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 52s] [195/208] installing rpm-libs-4.9.1-4.1 [ 52s] [196/208] installing evas-1.7.1+svn.77561+build31-1.1 [ 52s] [197/208] installing ecore-x-1.7.1+svn.77580+build25r02-3.1 [ 52s] [198/208] installing rpm-libs-x86-arm-4.9.1-10.1 [ 52s] [199/208] installing libtool-2.2.6b-1.1 [ 52s] [200/208] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 53s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 53s] [201/208] installing ecore-imf-evas-1.7.1+svn.77580+build25r02-3.1 [ 53s] [202/208] installing ecore-input-evas-1.7.1+svn.77580+build25r02-3.1 [ 53s] [203/208] installing evas-devel-1.7.1+svn.77561+build31-1.1 [ 53s] [204/208] installing rpm-build-4.9.1-4.1 [ 53s] [205/208] installing rpm-x86-arm-4.9.1-9.1 [ 53s] /bin/rpm.orig-arm already present - skipping. [ 53s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 53s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 53s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 53s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 53s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 53s] [206/208] installing rpm-build-x86-arm-4.9.1-9.1 [ 53s] /usr/bin/rpmbuild [ 53s] /usr/lib/rpm/debugedit [ 53s] [207/208] installing ecore-evas-1.7.1+svn.77580+build25r02-3.1 [ 53s] [208/208] installing ecore-devel-1.7.1+svn.77580+build25r02-3.1 [ 53s] now finalizing build dir... [ 54s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 56s] build target is armv7l-tizen-linux [ 56s] ----------------------------------------------------------------- [ 56s] I have the following modifications for eeze.spec: [ 56s] 7c7 [ 56s] < Release: 1 [ 56s] --- [ 56s] > Release: 1.1 [ 56s] ----------------------------------------------------------------- [ 56s] ----- building eeze.spec (user abuild) [ 56s] ----------------------------------------------------------------- [ 56s] ----------------------------------------------------------------- [ 57s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/3562e3358df09e9c75add3870f1df2b4-eeze' /home/abuild/rpmbuild/SOURCES/eeze.spec [ 57s] Building target platforms: armv7l-tizen-linux [ 57s] Building for target armv7l-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.MDsrnl [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf eeze-1.7.0+svn.77230+build04r01 [ 57s] + /bin/tar -xf - [ 57s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/eeze-1.7.0+svn.77230+build04r01.tar.gz [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd eeze-1.7.0+svn.77230+build04r01 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Vur2ty [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd eeze-1.7.0+svn.77230+build04r01 [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LD_AS_NEEDED=1 [ 57s] + export LD_AS_NEEDED [ 57s] + export 'CFLAGS+= -fPIC -Wall' [ 57s] + CFLAGS+=' -fPIC -Wall' [ 57s] + export 'LDFLAGS+= -Wl,--hash-style=both -Wl,--as-needed' [ 57s] + LDFLAGS+=' -Wl,--hash-style=both -Wl,--as-needed' [ 57s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 57s] Running aclocal... [ 68s] sh: svnversion: command not found [ 73s] Running autoheader... [ 76s] sh: svnversion: command not found [ 81s] Running autoconf... [ 87s] Running libtoolize... [ 87s] Running automake... [ 92s] configure.ac:66: installing `./compile' [ 92s] configure.ac:37: installing `./config.guess' [ 92s] configure.ac:37: installing `./config.sub' [ 92s] configure.ac:32: installing `./install-sh' [ 92s] configure.ac:32: installing `./missing' [ 92s] doc/Makefile.am:33: wildcard img/*.*: non-POSIX variable name [ 92s] doc/Makefile.am:33: (probably a GNU make extension) [ 93s] src/bin/Makefile.am: installing `./depcomp' [ 97s] cmp: config.cache-env: No such file or directory [ 97s] Cleaning configure cache... [ 98s] configure: creating cache config.cache [ 98s] checking for a BSD-compatible install... /usr/bin/install -c [ 99s] checking whether build environment is sane... yes [ 99s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 99s] checking for gawk... gawk [ 99s] checking whether make sets $(MAKE)... yes [ 99s] checking build system type... armv7l-unknown-linux-gnueabi [ 99s] checking host system type... armv7l-unknown-linux-gnueabi [ 99s] checking for style of include used by make... GNU [ 99s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 99s] checking for gcc... gcc [ 99s] checking whether the C compiler works... yes [ 99s] checking for C compiler default output file name... a.out [ 99s] checking for suffix of executables... [ 99s] checking whether we are cross compiling... no [ 99s] checking for suffix of object files... o [ 99s] checking whether we are using the GNU C compiler... yes [ 99s] checking whether gcc accepts -g... yes [ 99s] checking for gcc option to accept ISO C89... none needed [ 99s] checking dependency style of gcc... gcc3 [ 99s] checking for a sed that does not truncate output... /bin/sed [ 99s] checking for grep that handles long lines and -e... /bin/grep [ 99s] checking for egrep... /bin/grep -E [ 99s] checking for fgrep... /bin/grep -F [ 99s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 99s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 99s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 99s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 99s] checking whether ln -s works... yes [ 99s] checking the maximum length of command line arguments... 1572864 [ 99s] checking whether the shell understands some XSI constructs... yes [ 99s] checking whether the shell understands "+="... yes [ 99s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 99s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 99s] checking for objdump... objdump [ 99s] checking how to recognize dependent libraries... pass_all [ 99s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 99s] checking for ar... ar [ 99s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 99s] checking for strip... strip [ 99s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 99s] checking for ranlib... ranlib [ 100s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 100s] checking how to run the C preprocessor... gcc -E [ 100s] checking for ANSI C header files... yes [ 100s] checking for sys/types.h... yes [ 100s] checking for sys/stat.h... yes [ 100s] checking for stdlib.h... yes [ 100s] checking for string.h... yes [ 100s] checking for memory.h... yes [ 100s] checking for strings.h... yes [ 100s] checking for inttypes.h... yes [ 100s] checking for stdint.h... yes [ 100s] checking for unistd.h... yes [ 100s] checking for dlfcn.h... yes [ 100s] checking for objdir... .libs [ 100s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 100s] checking for gcc option to produce PIC... -fPIC -DPIC [ 100s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 100s] checking if gcc static flag -static works... no [ 100s] checking if gcc supports -c -o file.o... yes [ 100s] checking if gcc supports -c -o file.o... (cached) yes [ 100s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 100s] checking whether -lc should be explicitly linked in... no [ 100s] checking dynamic linker characteristics... GNU/Linux ld.so [ 100s] checking how to hardcode library paths into programs... immediate [ 100s] checking whether stripping libraries is possible... yes [ 100s] checking if libtool supports shared libraries... yes [ 100s] checking whether to build shared libraries... yes [ 100s] checking whether to build static libraries... yes [ 100s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 100s] checking whether we are using the GNU C compiler... (cached) yes [ 100s] checking whether gcc accepts -g... (cached) yes [ 100s] checking for gcc option to accept ISO C89... (cached) none needed [ 100s] checking dependency style of gcc... (cached) gcc3 [ 100s] checking whether gcc and cc understand -c and -o together... yes [ 100s] checking for __attribute__... yes [ 100s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 100s] checking for pkg-config... /usr/bin/pkg-config [ 101s] checking pkg-config is at least version 0.9.0... yes [ 101s] checking whether to build documentation... yes [ 101s] checking for doxygen... no [ 101s] WARNING: [ 101s] The doxygen program was not found in your execute path. [ 101s] You may have doxygen installed somewhere not covered by your path. [ 101s] [ 101s] If this is the case make sure you have the packages installed, AND [ 101s] that the doxygen program is in your execute path (see your [ 101s] shell manual page on setting the $PATH environment variable), OR [ 101s] alternatively, specify the program to use with --with-doxygen. [ 101s] configure: WARNING: no doxygen detected. Documentation will not be built [ 101s] checking for EEZE... yes [ 101s] checking netinet/in.h usability... yes [ 101s] checking netinet/in.h presence... yes [ 101s] checking for netinet/in.h... yes [ 101s] checking for struct ipv6_mreq... yes [ 101s] checking for ANSI C header files... (cached) yes [ 101s] checking whether the compiler supports -Wshadow... yes [ 101s] checking whether tests are built... no [ 101s] checking whether to build eeze_udev_test binary... yes [ 101s] checking whether to build eeze_sensor_test binary... yes [ 101s] checking whether to build eeze_mount binary... yes [ 101s] checking whether to build eeze_disk_ls binary... yes [ 101s] checking whether to build eeze_umount binary... yes [ 101s] checking whether to build eeze_scanner binary... yes [ 101s] configure: updating cache config.cache [ 101s] configure: creating ./config.status [ 101s] config.status: creating Makefile [ 101s] config.status: creating doc/eeze.dox [ 101s] config.status: creating doc/Makefile [ 101s] config.status: creating doc/Doxyfile [ 101s] config.status: creating src/Makefile [ 101s] config.status: creating src/lib/Makefile [ 101s] config.status: creating src/bin/Makefile [ 101s] config.status: creating src/tests/Makefile [ 101s] config.status: creating src/modules/Makefile [ 101s] config.status: creating eeze.pc [ 101s] config.status: creating eeze.spec [ 101s] config.status: creating config.h [ 101s] config.status: executing depfiles commands [ 102s] config.status: executing libtool commands [ 102s] [ 102s] [ 102s] [ 102s] ------------------------------------------------------------------------ [ 102s] eeze 1.7.99.0 [ 102s] ------------------------------------------------------------------------ [ 102s] [ 102s] Configuration Options Summary: [ 102s] Udev Tests.............: yes [ 102s] [ 102s] Tests..............: no (Coverage: no) [ 102s] [ 102s] Demos..................: [ 102s] eeze_mount...........: yes [ 102s] eeze_umount..........: yes [ 102s] eeze_disk_ls.........: yes [ 102s] [ 102s] Utilities..............: [ 102s] eeze_scanner.........: yes [ 102s] [ 102s] IPv6...................: yes [ 102s] [ 102s] Sensor.................: [ 102s] Tizen................: no [ 102s] [ 102s] Documentation..........: no [ 102s] [ 102s] Compilation............: make (or gmake) [ 102s] CPPFLAGS.............: [ 102s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall -Wshadow [ 102s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 102s] [ 102s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 102s] prefix...............: /usr [ 102s] [ 102s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall' [ 102s] + export CFLAGS [ 102s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 102s] + export CXXFLAGS [ 102s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 102s] + export FFLAGS [ 102s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 102s] checking for a BSD-compatible install... /usr/bin/install -c [ 103s] checking whether build environment is sane... yes [ 103s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 103s] checking for gawk... gawk [ 103s] checking whether make sets $(MAKE)... yes [ 103s] checking build system type... armv7l-unknown-linux-gnueabi [ 103s] checking host system type... armv7l-unknown-linux-gnueabi [ 103s] checking for style of include used by make... GNU [ 103s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 103s] checking for gcc... gcc [ 103s] checking whether the C compiler works... yes [ 103s] checking for C compiler default output file name... a.out [ 103s] checking for suffix of executables... [ 103s] checking whether we are cross compiling... no [ 103s] checking for suffix of object files... o [ 103s] checking whether we are using the GNU C compiler... yes [ 103s] checking whether gcc accepts -g... yes [ 103s] checking for gcc option to accept ISO C89... none needed [ 104s] checking dependency style of gcc... gcc3 [ 104s] checking for a sed that does not truncate output... /bin/sed [ 104s] checking for grep that handles long lines and -e... /bin/grep [ 104s] checking for egrep... /bin/grep -E [ 104s] checking for fgrep... /bin/grep -F [ 104s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 104s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 104s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 104s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 104s] checking whether ln -s works... yes [ 104s] checking the maximum length of command line arguments... 1572864 [ 104s] checking whether the shell understands some XSI constructs... yes [ 104s] checking whether the shell understands "+="... yes [ 104s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 104s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 104s] checking for objdump... objdump [ 104s] checking how to recognize dependent libraries... pass_all [ 104s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 104s] checking for ar... ar [ 104s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 104s] checking for strip... strip [ 104s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 104s] checking for ranlib... ranlib [ 104s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 104s] checking how to run the C preprocessor... gcc -E [ 104s] checking for ANSI C header files... yes [ 104s] checking for sys/types.h... yes [ 104s] checking for sys/stat.h... yes [ 104s] checking for stdlib.h... yes [ 104s] checking for string.h... yes [ 104s] checking for memory.h... yes [ 104s] checking for strings.h... yes [ 104s] checking for inttypes.h... yes [ 104s] checking for stdint.h... yes [ 104s] checking for unistd.h... yes [ 104s] checking for dlfcn.h... yes [ 104s] checking for objdir... .libs [ 105s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 105s] checking for gcc option to produce PIC... -fPIC -DPIC [ 105s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 105s] checking if gcc static flag -static works... no [ 105s] checking if gcc supports -c -o file.o... yes [ 105s] checking if gcc supports -c -o file.o... (cached) yes [ 105s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 105s] checking whether -lc should be explicitly linked in... no [ 105s] checking dynamic linker characteristics... GNU/Linux ld.so [ 105s] checking how to hardcode library paths into programs... immediate [ 105s] checking whether stripping libraries is possible... yes [ 105s] checking if libtool supports shared libraries... yes [ 105s] checking whether to build shared libraries... yes [ 105s] checking whether to build static libraries... yes [ 105s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 105s] checking whether we are using the GNU C compiler... (cached) yes [ 105s] checking whether gcc accepts -g... (cached) yes [ 105s] checking for gcc option to accept ISO C89... (cached) none needed [ 105s] checking dependency style of gcc... (cached) gcc3 [ 105s] checking whether gcc and cc understand -c and -o together... yes [ 105s] checking for __attribute__... yes [ 105s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 105s] checking for pkg-config... /usr/bin/pkg-config [ 105s] checking pkg-config is at least version 0.9.0... yes [ 105s] checking whether to build documentation... yes [ 105s] checking for doxygen... no [ 105s] WARNING: [ 105s] The doxygen program was not found in your execute path. [ 105s] You may have doxygen installed somewhere not covered by your path. [ 105s] [ 105s] If this is the case make sure you have the packages installed, AND [ 105s] that the doxygen program is in your execute path (see your [ 105s] shell manual page on setting the $PATH environment variable), OR [ 105s] alternatively, specify the program to use with --with-doxygen. [ 105s] configure: WARNING: no doxygen detected. Documentation will not be built [ 105s] checking for EEZE... yes [ 105s] checking netinet/in.h usability... yes [ 105s] checking netinet/in.h presence... yes [ 105s] checking for netinet/in.h... yes [ 105s] checking for struct ipv6_mreq... yes [ 105s] checking for ANSI C header files... (cached) yes [ 105s] checking whether the compiler supports -Wshadow... yes [ 105s] checking whether tests are built... no [ 105s] checking whether to build eeze_udev_test binary... yes [ 105s] checking whether to build eeze_sensor_test binary... yes [ 105s] checking whether to build eeze_mount binary... yes [ 105s] checking whether to build eeze_disk_ls binary... yes [ 105s] checking whether to build eeze_umount binary... yes [ 105s] checking whether to build eeze_scanner binary... yes [ 105s] configure: creating ./config.status [ 106s] config.status: creating Makefile [ 106s] config.status: creating doc/eeze.dox [ 106s] config.status: creating doc/Makefile [ 106s] config.status: creating doc/Doxyfile [ 106s] config.status: creating src/Makefile [ 106s] config.status: creating src/lib/Makefile [ 106s] config.status: creating src/bin/Makefile [ 106s] config.status: creating src/tests/Makefile [ 106s] config.status: creating src/modules/Makefile [ 106s] config.status: creating eeze.pc [ 106s] config.status: creating eeze.spec [ 106s] config.status: creating config.h [ 106s] config.status: config.h is unchanged [ 106s] config.status: executing depfiles commands [ 106s] config.status: executing libtool commands [ 106s] [ 106s] [ 106s] [ 106s] ------------------------------------------------------------------------ [ 106s] eeze 1.7.99.0 [ 106s] ------------------------------------------------------------------------ [ 106s] [ 106s] Configuration Options Summary: [ 106s] Udev Tests.............: yes [ 106s] [ 106s] Tests..............: no (Coverage: no) [ 106s] [ 106s] Demos..................: [ 106s] eeze_mount...........: yes [ 106s] eeze_umount..........: yes [ 106s] eeze_disk_ls.........: yes [ 106s] [ 106s] Utilities..............: [ 106s] eeze_scanner.........: yes [ 106s] [ 106s] IPv6...................: yes [ 106s] [ 106s] Sensor.................: [ 106s] Tizen................: no [ 106s] [ 106s] Documentation..........: no [ 106s] [ 106s] Compilation............: make (or gmake) [ 106s] CPPFLAGS.............: [ 106s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fPIC -Wall -Wshadow [ 106s] LDFLAGS..............: -Wl,--hash-style=both -Wl,--as-needed [ 106s] [ 106s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 106s] prefix...............: /usr [ 106s] [ 106s] + make -j4 [ 106s] make all-recursive [ 106s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 106s] Making all in src [ 106s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 106s] Making all in lib [ 106s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 106s] CC eeze_main.lo [ 106s] CC eeze_net.lo [ 106s] CC eeze_udev_find.lo [ 106s] CC eeze_udev_private.lo [ 106s] CC eeze_udev_syspath.lo [ 107s] CC eeze_udev_walk.lo [ 107s] CC eeze_udev_watch.lo [ 107s] CC eeze_sensor.lo [ 107s] CCLD libeeze.la [ 107s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 107s] Making all in bin [ 107s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 107s] CC eeze_sensor_test-eeze_sensor_test.o [ 107s] CC eeze_udev_test-eeze_udev_test.o [ 107s] CCLD eeze_sensor_test [ 107s] CCLD eeze_udev_test [ 107s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 107s] Making all in tests [ 107s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 107s] make[3]: Nothing to be done for `all'. [ 107s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 107s] Making all in modules [ 107s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 107s] CC eeze_sensor_fake_la-eeze_sensor_fake.lo [ 107s] CCLD eeze-sensor-fake.la [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[3]: Nothing to be done for `all-am'. [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] Making all in doc [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[2]: Nothing to be done for `all'. [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] + exit 0 [ 108s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sdgw0R [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd eeze-1.7.0+svn.77230+build04r01 [ 108s] + LANG=C [ 108s] + export LANG [ 108s] + unset DISPLAY [ 108s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 108s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 108s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 108s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm install [ 108s] Making install in src [ 108s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] Making install in lib [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 108s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib" [ 108s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libeeze.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib' [ 108s] libtool: install: /usr/bin/install -c .libs/libeeze.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.so.1.7.99 [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so.1 || { rm -f libeeze.so.1 && ln -s libeeze.so.1.7.99 libeeze.so.1; }; }) [ 108s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib && { ln -s -f libeeze.so.1.7.99 libeeze.so || { rm -f libeeze.so && ln -s libeeze.so.1.7.99 libeeze.so; }; }) [ 108s] libtool: install: /usr/bin/install -c .libs/libeeze.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.la [ 108s] libtool: install: /usr/bin/install -c .libs/libeeze.a /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.a [ 108s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.a [ 108s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.a [ 108s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 108s] test -z "/usr/include/eeze-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/include/eeze-1" [ 108s] /usr/bin/install -c -m 644 Eeze.h Eeze_Net.h Eeze_Sensor.h '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/include/eeze-1' [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/lib' [ 108s] Making install in bin [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/bin" [ 108s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze_sensor_test '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/bin' [ 108s] libtool: install: warning: `../../src/lib/libeeze.la' has not been installed in `/usr/lib' [ 108s] libtool: install: /usr/bin/install -c .libs/eeze_sensor_test /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/bin/eeze_sensor_test [ 108s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm" [ 108s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/bin" [ 108s] /usr/bin/make install-data-hook [ 108s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] make[4]: Nothing to be done for `install-data-hook'. [ 108s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/bin' [ 108s] Making install in tests [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 108s] make[3]: Nothing to be done for `install-exec-am'. [ 108s] make[3]: Nothing to be done for `install-data-am'. [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/tests' [ 108s] Making install in modules [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 108s] make[3]: Nothing to be done for `install-exec-am'. [ 108s] test -z "/usr/lib/eeze-sensor" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/eeze-sensor" [ 108s] /bin/sh ../../libtool --mode=install /usr/bin/install -c eeze-sensor-fake.la '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/eeze-sensor' [ 108s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.so /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 108s] libtool: install: /usr/bin/install -c .libs/eeze-sensor-fake.lai /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/eeze-sensor/eeze-sensor-fake.la [ 108s] libtool: install: warning: remember to run `libtool --finish /usr/lib/eeze-sensor' [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src/modules' [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[3]: Nothing to be done for `install-exec-am'. [ 108s] make[3]: Nothing to be done for `install-data-am'. [ 108s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/src' [ 108s] Making install in doc [ 108s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[2]: Nothing to be done for `install-exec-am'. [ 108s] make[2]: Nothing to be done for `install-data-am'. [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01/doc' [ 108s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] make[2]: Nothing to be done for `install-exec-am'. [ 108s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/pkgconfig" [ 108s] /usr/bin/install -c -m 644 eeze.pc '/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/pkgconfig' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01' [ 108s] + rm -f /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/share/info/dir [ 108s] + xargs rm -f -- [ 108s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm -regex '.*\.la$' [ 108s] + find /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm -regex '.*\.a$' [ 108s] + xargs rm -f -- [ 108s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/eeze-1.7.0+svn.77230+build04r01 [ 108s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/bin/eeze_sensor_test [ 108s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/eeze-sensor/eeze-sensor-fake.so [ 108s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/lib/libeeze.so.1.7.99 [ 108s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.debug [ 108s] symlinked /usr/lib/debug/usr/lib/libeeze.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeeze.so.1.debug [ 108s] 190 blocks [ 108s] + /usr/lib/rpm/check-buildroot [ 108s] + /usr/lib/rpm//brp-compress [ 108s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 108s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 108s] + /usr/lib/rpm/brp-python-bytecompile [ 108s] + /usr/lib/rpm/brp-python-hardlink [ 108s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 108s] Processing files: eeze-1.7.0+svn.77230+build04r01-1.1.armv7l [ 108s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 108s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 108s] [ 108s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.XZ2ibf [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd eeze-1.7.0+svn.77230+build04r01 [ 108s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 108s] + export DOCDIR [ 108s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 108s] + cp -pr AUTHORS COPYING README /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm/usr/share/doc/eeze-1.7.0+svn.77230+build04r01 [ 108s] + exit 0 [ 109s] Provides: libeeze.so.1 [ 109s] Requires(interp): /bin/sh /bin/sh [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Requires(post): /bin/sh /sbin/ldconfig [ 109s] Requires(postun): /bin/sh /sbin/ldconfig [ 109s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libecore.so.1 libeeze.so.1 libeina.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 libudev.so.0 [ 109s] Processing files: eeze-devel-1.7.0+svn.77230+build04r01-1.1.armv7l [ 109s] Provides: eeze-sensor-fake.so pkgconfig(eeze) = 1.7.99.0 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Requires: /usr/bin/pkg-config libc.so.6 libc.so.6(GLIBC_2.4) libeeze.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) pkgconfig(ecore) >= 1.6.99 pkgconfig(eina) >= 1.6.99 pkgconfig(libudev) [ 109s] Processing files: eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.armv7l [ 109s] Processing files: eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.armv7l [ 109s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 109s] Wrote: /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-devel-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 109s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.R8nz1C [ 109s] + umask 022 [ 109s] + cd /home/abuild/rpmbuild/BUILD [ 109s] + cd eeze-1.7.0+svn.77230+build04r01 [ 109s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/eeze-1.7.0+svn.77230+build04r01-1.1.arm [ 109s] + exit 0 [ 109s] ... checking for files with abuild user/group [ 109s] ... creating baselibs [ 110s] ... saving built packages [ 110s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 110s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 110s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 110s] /home/abuild/rpmbuild/RPMS/armv7l/eeze-devel-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 110s] /home/abuild/rpmbuild/SRPMS/eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm [ 110s] [ 110s] w08 finished "build eeze.spec" at Wed Jul 17 06:38:01 UTC 2013. [ 110s] [ 113s] [ 106.745804] SysRq : Power Off [ 115s] [ 108.198696] Power down. [ 115s] build: extracting built packages... [ 115s] eeze-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 115s] eeze-debuginfo-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 115s] eeze-debugsource-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 115s] eeze-devel-1.7.0+svn.77230+build04r01-1.1.armv7l.rpm [ 115s] eeze-1.7.0+svn.77230+build04r01-1.1.src.rpm