[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w02 started "build image-configurations.spec" at Wed Jul 17 05:59:12 UTC 2013. [ 0s] [ 0s] Building image-configurations for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '8f2497ebad781097a3cb0f92140db212' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/image-configurations.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/image-configurations.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/image-configurations.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=unsafe -drive file=/srv/build/root_5/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_5/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 6s] Booting from ROM... [ 8s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] udevd[160]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 9s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 6814/2097152 files, 253336/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] [ 2.833930] EXT4-fs (vda): Cannot change data mode on remount [ 10s] mount: / not mounted or bad option [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] *********************************** [ 10s] VM_TYPE: kvm script: /.build/build [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/image-configurations.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/image-configurations.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] /bin/rpm [ 11s] /usr/bin/rpm2cpio [ 11s] /usr/bin/rpmdb [ 11s] /usr/bin/rpmquery [ 11s] /usr/bin/rpmsign [ 11s] /usr/bin/rpmverify [ 11s] running rpm-libs-x86-arm postinstall script [ 12s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 16s] [1/151] installing kernel-headers-3.0.15-1.1 [ 16s] [2/151] installing tizen-release-2.2.0-1.1 [ 17s] [3/151] installing tzdata-2011h-1.1 [ 17s] [4/151] installing libgcc-4.5.3-1.2 [ 17s] [5/151] installing setup-0.1-1.1 [ 17s] [6/151] installing filesystem-0.1-1.1 [ 17s] warning: group lock does not exist - using root [ 17s] warning: group mail does not exist - using root [ 17s] [7/151] installing eglibc-2.13-1.9 [ 18s] [8/151] installing libstdc++-4.5.3-1.2 [ 18s] [9/151] installing eglibc-common-2.13-1.9 [ 19s] /var/tmp/rpm-tmp.muBKuW: line 2: /usr/bin/xargs: No such file or directory [ 19s] [10/151] installing libstdc++-devel-4.5.3-1.2 [ 20s] [11/151] installing bash-4.1-3.1 [ 20s] [12/151] installing bzip2-libs-1.0.5-4.1 [ 20s] [13/151] installing cpio-2.8-3.1 [ 20s] [14/151] installing diffutils-3.0-3.1 [ 20s] [15/151] installing e2fsprogs-libs-1.41.9-2.6 [ 20s] [16/151] installing elfutils-libelf-0.152-1.7 [ 20s] [17/151] installing fdupes-1.40-42.1 [ 20s] [18/151] installing findutils-4.2.31-1.1 [ 20s] [19/151] installing gdbm-1.8.3-1.1 [ 20s] [20/151] installing libattr-2.4.44-7.2 [ 20s] [21/151] installing libgomp-4.5.3-1.2 [ 21s] [22/151] installing libidn-1.15-6.1 [ 21s] [23/151] installing liblua-5.1.4-6.1 [ 21s] [24/151] installing libuuid-2.20.2-6.1 [ 21s] [25/151] installing lzo-2.03-1.1 [ 21s] [26/151] installing m4-1.4.14-1.1 [ 21s] [27/151] installing make-3.81-1.1 [ 21s] [28/151] installing net-tools-1.60-87.4 [ 21s] [29/151] installing nspr-4.8.7-1.6 [ 21s] [30/151] installing nss-softokn-freebl-3.12.9-3.10 [ 21s] [31/151] installing patch-2.6.1.169-1.1 [ 21s] [32/151] installing pkgconfig-0.25-2.1 [ 22s] [33/151] installing popt-1.16-3.1 [ 22s] [34/151] installing readline-5.2-13.1 [ 22s] [35/151] installing sed-4.1.5-2.1 [ 22s] [36/151] installing sqlite-3.7.13-1.1 [ 22s] [37/151] installing xz-libs-5.0.3-1.1 [ 22s] [38/151] installing zlib-1.2.5-2.5 [ 22s] [39/151] installing gmp-5.0.1-1.1 [ 22s] [40/151] installing libpcre-7.7-3.1 [ 22s] [41/151] installing ncurses-libs-5.7-4.1 [ 23s] [42/151] installing build-compare-2009.10.14-26.5 [ 23s] [43/151] installing qemu.x86_64-1.2-1.1 [ 24s] [44/151] installing eglibc-headers-2.13-1.9 [ 24s] [45/151] installing libcap-2.21-1.1 [ 24s] [46/151] installing unzip-6.0-9.3 [ 24s] [47/151] installing zlib-devel-1.2.5-2.5 [ 24s] [48/151] installing c-ares-1.7.4-2.1 [ 24s] [49/151] installing grep-2.5.1a-62.1 [ 24s] [50/151] installing libacl-2.2.49-2.1 [ 24s] [51/151] installing libfile-5.04-1.1 [ 25s] [52/151] installing libpython-2.7.1-1.6 [ 25s] [53/151] installing libxml2-2.7.8-8.1 [ 25s] [54/151] installing lzo-minilzo-2.03-1.1 [ 25s] [55/151] installing mpfr-3.0.0-1.1 [ 25s] [56/151] installing ncurses-5.7-4.1 [ 25s] [57/151] installing binutils-2.22-1.1 [ 25s] [58/151] installing bzip2-1.0.5-4.1 [ 25s] [59/151] installing libblkid-2.20.2-6.1 [ 26s] [60/151] installing xz-5.0.3-1.1 [ 26s] [61/151] installing elfutils-libs-0.152-1.7 [ 26s] [62/151] installing nss-3.12.9-3.10 [ 26s] [63/151] installing perl-5.12.1-61.6 [ 27s] [64/151] installing ncurses-base-5.7-4.1 [ 27s] [65/151] installing perl-HTML-Tagset-3.20-8.1 [ 27s] [66/151] installing perl-IO-Compress-Base-2.008-61.6 [ 27s] [67/151] installing perl-Module-Pluggable-3.60-61.6 [ 27s] [68/151] installing perl-Pod-Escapes-1.04-61.6 [ 27s] [69/151] installing perl-TimeDate-1.20-1.1 [ 27s] [70/151] installing eglibc-devel-2.13-1.9 [ 27s] [71/151] installing lzo-devel-2.03-1.1 [ 27s] [72/151] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 27s] [73/151] installing perl-devel-5.12.1-61.6 [ 28s] [74/151] installing perl-libs-5.12.1-61.6 [ 28s] [75/151] installing tar-1.17-4.1 [ 28s] [76/151] installing coreutils-6.9-9.1 [ 28s] [77/151] installing file-5.04-1.1 [ 28s] [78/151] installing libmount-2.20.2-6.1 [ 28s] [79/151] installing mpc-0.9-1.1 [ 28s] [80/151] installing openssl-1.0.1c-1.11 [ 28s] [81/151] installing xz-lzma-compat-5.0.3-1.1 [ 28s] [82/151] installing elfutils-0.152-1.7 [ 28s] [83/151] installing nss-sysinit-3.12.9-3.10 [ 29s] [84/151] installing python-base-2.7.1-1.6 [ 29s] [85/151] installing python-yaml-3.09-1.1 [ 29s] [86/151] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 29s] [87/151] installing perl-Pod-Simple-3.07-61.6 [ 29s] [88/151] installing perl-Test-Simple-0.80-61.6 [ 29s] [89/151] installing tizen-accelerator-1.0.1-1.1 [ 30s] [90/151] installing perl-IO-Compress-Zlib-2.008-61.6 [ 30s] [91/151] installing perl-Test-Harness-3.12-61.6 [ 30s] [92/151] installing gawk-3.1.5-1.1 [ 30s] [93/151] installing gzip-1.3.14-2.1 [ 30s] [94/151] installing libxslt-1.1.16-1.1 [ 30s] [95/151] installing python-cheetah-2.4.4-1.1 [ 30s] [96/151] installing build-2011.01.10a-1.1 [ 30s] [97/151] installing libcurl-7.28.1-2.1 [ 30s] [98/151] installing cpp-4.5.3-1.2 [ 31s] [99/151] installing util-linux-2.20.2-6.1 [ 31s] warning: group tty does not exist - using root [ 31s] /bin/chown: `root:root': invalid user [ 31s] [100/151] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 31s] [101/151] installing eglibc-x86-arm-2.13-9.1 [ 31s] [102/151] installing elfutils-libelf-x86-arm-0.152-9.1 [ 31s] [103/151] installing elfutils-libs-x86-arm-0.152-9.1 [ 32s] [104/151] installing gmp-x86-arm-5.0.1-9.1 [ 32s] [105/151] installing libacl-x86-arm-2.2.49-9.1 [ 32s] [106/151] installing libattr-x86-arm-2.4.44-9.1 [ 32s] [107/151] installing libcap-x86-arm-2.21-9.1 [ 32s] [108/151] installing libfile-x86-arm-5.04-9.1 [ 33s] [109/151] installing libgcc-x86-arm-4.5.3-9.1 [ 33s] [110/151] installing liblua-x86-arm-5.1.4-9.1 [ 33s] [111/151] installing mpc-x86-arm-0.9-9.1 [ 33s] [112/151] installing mpfr-x86-arm-3.0.0-9.1 [ 33s] [113/151] installing ncurses-libs-x86-arm-5.7-9.1 [ 33s] [114/151] installing nspr-x86-arm-4.8.7-9.1 [ 34s] [115/151] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 34s] [116/151] installing nss-x86-arm-3.12.9-9.1 [ 34s] [117/151] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 34s] [118/151] installing popt-x86-arm-1.16-9.1 [ 34s] [119/151] installing sqlite-x86-arm-3.7.13-9.1 [ 34s] [120/151] installing xz-libs-x86-arm-5.0.3-9.1 [ 35s] [121/151] installing zlib-x86-arm-1.2.5-7.1 [ 54s] [122/151] installing curl-7.28.1-2.1 [ 54s] [123/151] installing python-lxml-2.2.3-3.1 [ 54s] [124/151] installing gcc-4.5.3-1.2 [ 54s] [125/151] installing perl-CPAN-1.9205-61.6 [ 55s] [126/151] installing bash-x86-arm-4.1-7.1 [ 55s] [127/151] installing fdupes-x86-arm-1.40-9.1 [ 55s] [128/151] installing findutils-x86-arm-4.2.31-7.1 [ 55s] [129/151] installing gawk-x86-arm-3.1.5-7.1 [ 55s] [130/151] installing gzip-x86-arm-1.3.14-9.1 [ 55s] [131/151] installing kickstarter-0.15-1.1 [ 55s] [132/151] installing make-x86-arm-3.81-8.1 [ 56s] [133/151] installing patch-x86-arm-2.6.1.169-7.1 [ 56s] [134/151] installing sed-x86-arm-4.1.5-9.1 [ 56s] /bin/sed.orig-arm already present - skipping. [ 56s] [135/151] installing diffutils-x86-arm-3.0-9.1 [ 56s] /usr/bin/cmp.orig-arm already present - skipping. [ 56s] /usr/bin/diff.orig-arm already present - skipping. [ 56s] /usr/bin/diff3.orig-arm already present - skipping. [ 56s] /usr/bin/sdiff.orig-arm already present - skipping. [ 56s] [136/151] installing autoconf-2.68-1.1 [ 56s] [137/151] installing coreutils-x86-arm-6.9-7.1 [ 59s] [138/151] installing file-x86-arm-5.04-7.1 [ 59s] [139/151] installing tar-x86-arm-1.17-9.1 [ 59s] /bin/tar.orig-arm already present - skipping. [ 64s] [140/151] installing elfutils-x86-arm-0.152-7.2 [ 64s] [141/151] installing gcc-c++-4.5.3-1.2 [ 64s] [142/151] installing rpm-4.9.1-4.1 [ 64s] [143/151] installing automake-1.11.1-3.1 [ 64s] [144/151] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 66s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 66s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 66s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 66s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 66s] [145/151] installing rpm-libs-4.9.1-4.1 [ 66s] [146/151] installing rpm-libs-x86-arm-4.9.1-10.1 [ 66s] [147/151] installing libtool-2.2.6b-1.1 [ 66s] [148/151] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 66s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 66s] [149/151] installing rpm-build-4.9.1-4.1 [ 66s] [150/151] installing rpm-x86-arm-4.9.1-9.1 [ 66s] /bin/rpm.orig-arm already present - skipping. [ 66s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 66s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 66s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 66s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 66s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 66s] [151/151] installing rpm-build-x86-arm-4.9.1-9.1 [ 67s] /usr/bin/rpmbuild [ 67s] /usr/lib/rpm/debugedit [ 67s] now finalizing build dir... [ 67s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 70s] build target is armv7l-tizen-linux [ 70s] ----------------------------------------------------------------- [ 70s] I have the following modifications for image-configurations.spec: [ 70s] 5c5 [ 70s] < Release: 1 [ 70s] --- [ 70s] > Release: 1.1 [ 70s] 40a41 [ 70s] > %changelog [ 70s] ----------------------------------------------------------------- [ 70s] ----- building image-configurations.spec (user abuild) [ 70s] ----------------------------------------------------------------- [ 70s] ----------------------------------------------------------------- [ 70s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/8f2497ebad781097a3cb0f92140db212-image-configurations' /home/abuild/rpmbuild/SOURCES/image-configurations.spec [ 70s] Building target platforms: armv7l-tizen-linux [ 70s] Building for target armv7l-tizen-linux [ 70s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HxEnKa [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + rm -rf image-configurations-7 [ 70s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/image-configurations-7.tar.bz2 [ 70s] + /bin/tar -xf - [ 70s] + STATUS=0 [ 70s] + '[' 0 -ne 0 ']' [ 70s] + cd image-configurations-7 [ 70s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 70s] + exit 0 [ 70s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tO8QY8 [ 70s] + umask 022 [ 70s] + cd /home/abuild/rpmbuild/BUILD [ 70s] + cd image-configurations-7 [ 70s] + LANG=C [ 70s] + export LANG [ 70s] + unset DISPLAY [ 70s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 70s] + export CFLAGS [ 70s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 70s] + export CXXFLAGS [ 70s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 70s] + export FFLAGS [ 70s] + LD_AS_NEEDED=1 [ 70s] + export LD_AS_NEEDED [ 70s] + cp /home/abuild/rpmbuild/SOURCES/image-configurations.manifest . [ 70s] + kickstarter -c configurations.yaml -r repos.yaml -i image-configs.xml [ 73s] Creating RD-210 (RD-210.ks) [ 73s] Creating RD-210-REF (RD-210-REF.ks) [ 73s] Creating RD-PQ (RD-PQ.ks) [ 73s] Creating RD-PQ-REF (RD-PQ-REF.ks) [ 73s] Creating Tizen Handset Blackbay (handset-blackbay.ks) [ 73s] Creating Tizen Handset Blackbay REF (handset-blackbay-ref.ks) [ 73s] Creating Tizen Pinetrail (pinetrail.ks) [ 73s] + exit 0 [ 73s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WkmwOj [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd image-configurations-7 [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm [ 73s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm [ 73s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm/usr/share/image-configurations [ 73s] + cp tizen-0.0/RD-210-REF.ks tizen-0.0/RD-210.ks tizen-0.0/RD-PQ-REF.ks tizen-0.0/RD-PQ.ks tizen-0.0/handset-blackbay-ref.ks tizen-0.0/handset-blackbay.ks tizen-0.0/pinetrail.ks /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm/usr/share/image-configurations [ 73s] + cp image-configs.xml /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm/usr/share/image-configurations [ 73s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/image-configurations-7 [ 73s] + /usr/lib/rpm/check-buildroot [ 73s] + /usr/lib/rpm//brp-compress [ 73s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 73s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 73s] + /usr/lib/rpm/brp-python-bytecompile [ 74s] + /usr/lib/rpm/brp-python-hardlink [ 74s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm [ 74s] Processing files: image-configurations-7-1.1.noarch [ 74s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 74s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 74s] [ 74s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 74s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm [ 74s] Wrote: /home/abuild/rpmbuild/SRPMS/image-configurations-7-1.1.src.rpm [ 74s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/image-configurations-7-1.1.noarch.rpm [ 74s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.O7LlKZ [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd image-configurations-7 [ 74s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/image-configurations-7-1.1.arm [ 74s] + exit 0 [ 74s] ... checking for files with abuild user/group [ 74s] ... creating baselibs [ 75s] ... saving built packages [ 75s] /home/abuild/rpmbuild/RPMS/noarch/image-configurations-7-1.1.noarch.rpm [ 75s] /home/abuild/rpmbuild/SRPMS/image-configurations-7-1.1.src.rpm [ 75s] [ 75s] w02 finished "build image-configurations.spec" at Wed Jul 17 06:00:26 UTC 2013. [ 75s] [ 78s] [ 70.916953] SysRq : Power Off [ 80s] [ 72.434965] Power down. [ 80s] build: extracting built packages... [ 80s] image-configurations-7-1.1.noarch.rpm [ 80s] image-configurations-7-1.1.src.rpm