[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w01 started "build libfeedback.spec" at Wed Jul 17 06:40:56 UTC 2013. [ 0s] [ 0s] Building libfeedback for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '5da5d4f7f4e03b65ec679f89f58b57c2' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/libfeedback.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/libfeedback.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/libfeedback.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: systemd -> libudev -> udev [ 3s] breaking dependency systemd -> libudev [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses-libs -> ncurses [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-libs -> ncurses-base -> ncurses [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: pulseaudio-libs -> pulseaudio [ 3s] breaking dependency pulseaudio -> pulseaudio-libs [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=unsafe -drive file=/srv/build/root_4/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_4/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[208]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 6942/2097152 files, 258680/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] [ 2.643370] EXT4-fs (vda): Cannot change data mode on remount [ 10s] mount: / not mounted or bad option [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] *********************************** [ 10s] VM_TYPE: kvm script: /.build/build [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/libfeedback.spec ... [ 10s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libfeedback.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] /bin/rpm [ 11s] /usr/bin/rpm2cpio [ 11s] /usr/bin/rpmdb [ 11s] /usr/bin/rpmquery [ 11s] /usr/bin/rpmsign [ 11s] /usr/bin/rpmverify [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 17s] [1/215] installing capi-base-common-0.1.0-9.1 [ 17s] [2/215] installing kernel-headers-3.0.15-1.1 [ 17s] [3/215] installing libX11-common-1.5.0-3.1 [ 17s] [4/215] installing tizen-release-2.2.0-1.1 [ 17s] [5/215] installing tzdata-2011h-1.1 [ 17s] [6/215] installing libgcc-4.5.3-1.2 [ 18s] [7/215] installing setup-0.1-1.1 [ 18s] [8/215] installing filesystem-0.1-1.1 [ 18s] warning: group lock does not exist - using root [ 18s] warning: group mail does not exist - using root [ 18s] [9/215] installing eglibc-2.13-1.9 [ 18s] [10/215] installing libstdc++-4.5.3-1.2 [ 19s] [11/215] installing eglibc-common-2.13-1.9 [ 20s] /var/tmp/rpm-tmp.s4qcR5: line 2: /usr/bin/xargs: No such file or directory [ 20s] [12/215] installing iniparser-2.17-3.1 [ 20s] [13/215] installing libstdc++-devel-4.5.3-1.2 [ 20s] [14/215] installing alsa-scenario-0.2.1-13.1 [ 20s] [15/215] installing bash-4.1-3.1 [ 20s] [16/215] installing bzip2-libs-1.0.5-4.1 [ 21s] [17/215] installing cpio-2.8-3.1 [ 21s] [18/215] installing diffutils-3.0-3.1 [ 21s] [19/215] installing e2fsprogs-libs-1.41.9-2.6 [ 21s] [20/215] installing elfutils-libelf-0.152-1.7 [ 21s] [21/215] installing expat-2.0.1-8.1 [ 21s] [22/215] installing fdupes-1.40-42.1 [ 21s] [23/215] installing findutils-4.2.31-1.1 [ 21s] [24/215] installing gdbm-1.8.3-1.1 [ 21s] [25/215] installing kmod-5-4.1 [ 21s] [26/215] installing libXau-1.0.7-1.1 [ 21s] [27/215] installing libasound-1.0.24.1-3.1 [ 22s] [28/215] installing libattr-2.4.44-7.2 [ 22s] [29/215] installing libffi-3.0.9-100.1 [ 22s] [30/215] installing libgomp-4.5.3-1.2 [ 22s] [31/215] installing libidn-1.15-6.1 [ 22s] [32/215] installing libiri-1.1-1.1 [ 22s] [33/215] installing liblua-5.1.4-6.1 [ 22s] [34/215] installing libtool-ltdl-2.2.6b-1.1 [ 22s] [35/215] installing libunwind-1.1-2.1 [ 22s] [36/215] installing libuuid-2.20.2-6.1 [ 23s] [37/215] installing lzo-2.03-1.1 [ 23s] [38/215] installing m4-1.4.14-1.1 [ 23s] [39/215] installing make-3.81-1.1 [ 23s] [40/215] installing net-tools-1.60-87.4 [ 23s] [41/215] installing nspr-4.8.7-1.6 [ 23s] [42/215] installing nss-softokn-freebl-3.12.9-3.10 [ 23s] [43/215] installing patch-2.6.1.169-1.1 [ 23s] [44/215] installing pkgconfig-0.25-2.1 [ 23s] [45/215] installing popt-1.16-3.1 [ 23s] [46/215] installing readline-5.2-13.1 [ 23s] [47/215] installing sed-4.1.5-2.1 [ 23s] [48/215] installing smack-1.0slp2+s11-1.1 [ 24s] [49/215] installing speex-1.2rc1-3.1 [ 24s] [50/215] installing sqlite-3.7.13-1.1 [ 24s] [51/215] installing xz-libs-5.0.3-1.1 [ 24s] [52/215] installing zlib-1.2.5-2.5 [ 24s] [53/215] installing gmp-5.0.1-1.1 [ 24s] [54/215] installing libpcre-7.7-3.1 [ 24s] [55/215] installing ncurses-libs-5.7-4.1 [ 24s] [56/215] installing build-compare-2009.10.14-26.5 [ 24s] [57/215] installing qemu.x86_64-1.2-1.1 [ 25s] [58/215] installing vconf-internal-keys-devel-0.0.82-1.1 [ 26s] [59/215] installing capi-base-common-devel-0.1.0-9.1 [ 26s] [60/215] installing eglibc-headers-2.13-1.9 [ 26s] [61/215] installing libasound-devel-1.0.24.1-3.1 [ 26s] [62/215] installing libcap-2.21-1.1 [ 26s] [63/215] installing libpci3-3.0.0-1.1 [ 26s] [64/215] installing sysvinit-utils-2.87-6.1 [ 26s] [65/215] installing unzip-6.0-9.3 [ 26s] [66/215] installing zlib-devel-1.2.5-2.5 [ 26s] [67/215] installing c-ares-1.7.4-2.1 [ 26s] [68/215] installing grep-2.5.1a-62.1 [ 27s] [69/215] installing libacl-2.2.49-2.1 [ 27s] [70/215] installing libfile-5.04-1.1 [ 27s] [71/215] installing libpython-2.7.1-1.6 [ 27s] [72/215] installing libsndfile-1.0.25-1.1 [ 27s] [73/215] installing libxcb-1.8.1-1.1 [ 27s] [74/215] installing libxml2-2.7.8-8.1 [ 27s] [75/215] installing lzo-minilzo-2.03-1.1 [ 27s] [76/215] installing mpfr-3.0.0-1.1 [ 27s] [77/215] installing ncurses-5.7-4.1 [ 28s] [78/215] installing binutils-2.22-1.1 [ 28s] [79/215] installing bzip2-1.0.5-4.1 [ 28s] [80/215] installing glib2-2.32.3-5.1 [ 28s] [81/215] installing libblkid-2.20.2-6.1 [ 28s] [82/215] installing smack-utils-1.0slp2+s11-1.1 [ 28s] [83/215] installing xz-5.0.3-1.1 [ 28s] [84/215] installing elfutils-libs-0.152-1.7 [ 29s] [85/215] installing nss-3.12.9-3.10 [ 29s] [86/215] installing perl-5.12.1-61.6 [ 29s] [87/215] installing ncurses-base-5.7-4.1 [ 30s] [88/215] installing perl-HTML-Tagset-3.20-8.1 [ 30s] [89/215] installing perl-IO-Compress-Base-2.008-61.6 [ 30s] [90/215] installing perl-Module-Pluggable-3.60-61.6 [ 30s] [91/215] installing perl-Pod-Escapes-1.04-61.6 [ 30s] [92/215] installing perl-TimeDate-1.20-1.1 [ 30s] [93/215] installing eglibc-devel-2.13-1.9 [ 30s] [94/215] installing smack-privilege-config-1.0.4.TIZEN-3.1 [ 30s] [95/215] installing alsa-scenario-devel-0.2.1-13.1 [ 30s] [96/215] installing lzo-devel-2.03-1.1 [ 30s] [97/215] installing pciutils-3.0.0-1.1 [ 31s] [98/215] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 31s] [99/215] installing perl-devel-5.12.1-61.6 [ 31s] [100/215] installing perl-libs-5.12.1-61.6 [ 31s] [101/215] installing tar-1.17-4.1 [ 31s] [102/215] installing coreutils-6.9-9.1 [ 31s] [103/215] installing file-5.04-1.1 [ 31s] [104/215] installing libX11-1.5.0-3.1 [ 31s] [105/215] installing libdlog-0.4.1-16.1 [ 32s] chown: `root:app_logging': invalid user [ 32s] [106/215] installing libmount-2.20.2-6.1 [ 32s] [107/215] installing mpc-0.9-1.1 [ 32s] [108/215] installing openssl-1.0.1c-1.11 [ 32s] [109/215] installing xz-lzma-compat-5.0.3-1.1 [ 32s] [110/215] installing elfutils-0.152-1.7 [ 32s] [111/215] installing nss-sysinit-3.12.9-3.10 [ 32s] [112/215] installing python-base-2.7.1-1.6 [ 33s] [113/215] installing libdlog-devel-0.4.1-16.1 [ 33s] [114/215] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 33s] [115/215] installing perl-Pod-Simple-3.07-61.6 [ 33s] [116/215] installing perl-Test-Simple-0.80-61.6 [ 33s] [117/215] installing tizen-accelerator-1.0.1-1.1 [ 33s] [118/215] installing perl-IO-Compress-Zlib-2.008-61.6 [ 33s] [119/215] installing perl-Test-Harness-3.12-61.6 [ 34s] [120/215] installing gawk-3.1.5-1.1 [ 34s] [121/215] installing gzip-1.3.14-2.1 [ 61s] [122/215] installing heynoti-0.0.2-39.1 [ 63s] [123/215] installing libmm-common-0.2.54-1.1 [ 63s] [124/215] installing pam-1.1.5-2.1 [ 63s] [125/215] installing build-2011.01.10a-1.1 [ 63s] [126/215] installing python-devel-2.7.1-1.6 [ 64s] [127/215] installing libcurl-7.28.1-2.1 [ 64s] [128/215] installing sys-assert-0.3.3-5.1 [ 64s] chown: `root:crash': invalid user [ 64s] chown: `root:crash': invalid user [ 64s] [129/215] installing cpp-4.5.3-1.2 [ 64s] [130/215] installing dbus-1.6.4-6.1 [ 64s] warning: group dbus does not exist - using root [ 64s] [131/215] installing util-linux-2.20.2-6.1 [ 65s] warning: group tty does not exist - using root [ 65s] /bin/chown: `root:root': invalid user [ 65s] [132/215] installing libprivilege-control-0.0.39.TIZEN-3.1 [ 65s] [133/215] installing libarchive-2.8.3-1.2 [ 65s] [134/215] installing glib2-devel-2.32.3-5.1 [ 65s] [135/215] installing libmm-log-devel-0.1.5-7.1 [ 65s] [136/215] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 66s] [137/215] installing dbus-libs-1.6.4-6.1 [ 66s] [138/215] installing eglibc-x86-arm-2.13-9.1 [ 66s] [139/215] installing elfutils-libelf-x86-arm-0.152-9.1 [ 66s] [140/215] installing elfutils-libs-x86-arm-0.152-9.1 [ 66s] [141/215] installing gmp-x86-arm-5.0.1-9.1 [ 67s] [142/215] installing libacl-x86-arm-2.2.49-9.1 [ 67s] [143/215] installing libattr-x86-arm-2.4.44-9.1 [ 67s] [144/215] installing libcap-x86-arm-2.21-9.1 [ 67s] [145/215] installing libfile-x86-arm-5.04-9.1 [ 67s] [146/215] installing libgcc-x86-arm-4.5.3-9.1 [ 67s] [147/215] installing liblua-x86-arm-5.1.4-9.1 [ 68s] [148/215] installing mpc-x86-arm-0.9-9.1 [ 68s] [149/215] installing mpfr-x86-arm-3.0.0-9.1 [ 68s] [150/215] installing ncurses-libs-x86-arm-5.7-9.1 [ 68s] [151/215] installing nspr-x86-arm-4.8.7-9.1 [ 68s] [152/215] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 69s] [153/215] installing nss-x86-arm-3.12.9-9.1 [ 69s] [154/215] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 69s] [155/215] installing popt-x86-arm-1.16-9.1 [ 69s] [156/215] installing sqlite-x86-arm-3.7.13-9.1 [ 69s] [157/215] installing xz-libs-x86-arm-5.0.3-9.1 [ 70s] [158/215] installing zlib-x86-arm-1.2.5-7.1 [ 70s] [159/215] installing libxml2-devel-2.7.8-8.1 [ 70s] [160/215] installing curl-7.28.1-2.1 [ 70s] [161/215] installing cmake-2.8.5-1.1 [ 70s] [162/215] installing gcc-4.5.3-1.2 [ 70s] [163/215] installing perl-CPAN-1.9205-61.6 [ 71s] [164/215] installing bash-x86-arm-4.1-7.1 [ 71s] [165/215] installing fdupes-x86-arm-1.40-9.1 [ 71s] [166/215] installing findutils-x86-arm-4.2.31-7.1 [ 71s] [167/215] installing gawk-x86-arm-3.1.5-7.1 [ 71s] [168/215] installing gzip-x86-arm-1.3.14-9.1 [ 71s] [169/215] installing libmm-common-devel-0.2.54-1.1 [ 71s] [170/215] installing make-x86-arm-3.81-8.1 [ 72s] [171/215] installing patch-x86-arm-2.6.1.169-7.1 [ 72s] [172/215] installing sed-x86-arm-4.1.5-9.1 [ 72s] /bin/sed.orig-arm already present - skipping. [ 72s] [173/215] installing diffutils-x86-arm-3.0-9.1 [ 72s] /usr/bin/cmp.orig-arm already present - skipping. [ 72s] /usr/bin/diff.orig-arm already present - skipping. [ 72s] /usr/bin/diff3.orig-arm already present - skipping. [ 72s] /usr/bin/sdiff.orig-arm already present - skipping. [ 72s] [174/215] installing autoconf-2.68-1.1 [ 72s] [175/215] installing coreutils-x86-arm-6.9-7.1 [ 75s] [176/215] installing file-x86-arm-5.04-7.1 [ 75s] [177/215] installing tar-x86-arm-1.17-9.1 [ 75s] /bin/tar.orig-arm already present - skipping. [ 75s] [178/215] installing bluez-4.101_23-24.1 [ 75s] [179/215] installing elfutils-x86-arm-0.152-7.2 [ 75s] [180/215] installing systemd-43-2.1 [ 75s] [181/215] installing gcc-c++-4.5.3-1.2 [ 76s] [182/215] installing rpm-4.9.1-4.1 [ 76s] [183/215] installing automake-1.11.1-3.1 [ 76s] [184/215] installing vconf-0.2.50-1.1 [ 76s] Failed to get D-Bus connection: No connection to service manager. [ 76s] warning: %post(vconf-0.2.50-1.1.armv7l) scriptlet failed, exit status 1 [ 76s] [185/215] installing udev-182-6.1 [ 76s] Failed to get D-Bus connection: No connection to service manager. [ 76s] Failed to get D-Bus connection: No connection to service manager. [ 76s] Failed to get D-Bus connection: No connection to service manager. [ 76s] Failed to get D-Bus connection: No connection to service manager. [ 76s] [186/215] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 77s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 77s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 77s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 77s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 77s] [187/215] installing security-server-0.0.78-1.1 [ 78s] Failed to get D-Bus connection: No connection to service manager. [ 78s] Failed to get D-Bus connection: No connection to service manager. [ 78s] [188/215] installing rpm-libs-4.9.1-4.1 [ 78s] [189/215] installing vconf-keys-devel-0.2.50-1.1 [ 78s] [190/215] installing libudev-182-6.1 [ 78s] [191/215] installing rpm-libs-x86-arm-4.9.1-10.1 [ 78s] [192/215] installing libtool-2.2.6b-1.1 [ 78s] [193/215] installing libhaptic-0.1.0-9.1 [ 78s] [194/215] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 79s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 79s] [195/215] installing sysman-0.2.29-3.1 [ 79s] [196/215] installing libsecurity-server-client-0.0.78-1.1 [ 79s] [197/215] installing rpm-build-4.9.1-4.1 [ 79s] [198/215] installing sysman-devel-0.2.29-3.1 [ 79s] [199/215] installing libhaptic-devel-0.1.0-9.1 [ 79s] [200/215] installing vconf-devel-0.2.50-1.1 [ 79s] [201/215] installing audio-session-manager-0.2.6-2.1 [ 79s] [202/215] installing rpm-x86-arm-4.9.1-9.1 [ 79s] /bin/rpm.orig-arm already present - skipping. [ 79s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 79s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 79s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 79s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 79s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 79s] [203/215] installing pulseaudio-0.9.23-34.1 [ 80s] Failed to get D-Bus connection: No connection to service manager. [ 80s] Failed to get D-Bus connection: No connection to service manager. [ 80s] warning: %post(pulseaudio-0.9.23-34.1.armv7l) scriptlet failed, exit status 1 [ 80s] [204/215] installing rpm-build-x86-arm-4.9.1-9.1 [ 80s] /usr/bin/rpmbuild [ 80s] /usr/lib/rpm/debugedit [ 80s] [205/215] installing audio-session-manager-devel-0.2.6-2.1 [ 80s] [206/215] installing pulseaudio-libs-0.9.23-34.1 [ 80s] [207/215] installing libmm-session-0.2.6-1.1 [ 80s] [208/215] installing pulseaudio-libs-devel-0.9.23-34.1 [ 80s] [209/215] installing audio-session-manager-sdk-devel-0.2.6-2.1 [ 80s] [210/215] installing avsystem-0.5.8-2.1 [ 80s] Failed to get D-Bus connection: No connection to service manager. [ 80s] Failed to get D-Bus connection: No connection to service manager. [ 80s] warning: %post(avsystem-0.5.8-2.1.armv7l) scriptlet failed, exit status 1 [ 80s] [211/215] installing libmm-session-devel-0.2.6-1.1 [ 80s] [212/215] installing avsystem-devel-0.5.8-2.1 [ 81s] [213/215] installing libmm-sound-0.7.4-1.1 [ 81s] [214/215] installing libmm-sound-devel-0.7.4-1.1 [ 81s] [215/215] installing libmm-sound-sdk-devel-0.7.4-1.1 [ 81s] now finalizing build dir... [ 82s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 84s] build target is armv7l-tizen-linux [ 84s] ----------------------------------------------------------------- [ 84s] I have the following modifications for libfeedback.spec: [ 84s] 4c4 [ 84s] < Release: 0 [ 84s] --- [ 84s] > Release: 1.1 [ 84s] ----------------------------------------------------------------- [ 84s] ----- building libfeedback.spec (user abuild) [ 84s] ----------------------------------------------------------------- [ 84s] ----------------------------------------------------------------- [ 85s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/5da5d4f7f4e03b65ec679f89f58b57c2-libfeedback' /home/abuild/rpmbuild/SOURCES/libfeedback.spec [ 85s] Building target platforms: armv7l-tizen-linux [ 85s] Building for target armv7l-tizen-linux [ 85s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3Rv4uv [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + rm -rf libfeedback-0.1.3 [ 85s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libfeedback-0.1.3.tar.gz [ 85s] + /bin/tar -xf - [ 85s] + STATUS=0 [ 85s] + '[' 0 -ne 0 ']' [ 85s] + cd libfeedback-0.1.3 [ 85s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 85s] + exit 0 [ 85s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.tC1ofp [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd libfeedback-0.1.3 [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + LD_AS_NEEDED=1 [ 85s] + export LD_AS_NEEDED [ 85s] + cp /home/abuild/rpmbuild/SOURCES/libsvi.manifest . [ 85s] + cp /home/abuild/rpmbuild/SOURCES/libfeedback.manifest . [ 85s] + cp /home/abuild/rpmbuild/SOURCES/svi-data-sdk.manifest . [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 85s] -- The C compiler identification is GNU [ 85s] -- Check for working C compiler: /usr/bin/gcc [ 85s] -- Check for working C compiler: /usr/bin/gcc -- works [ 85s] -- Detecting C compiler ABI info [ 86s] -- Detecting C compiler ABI info - done [ 86s] -- checking for module 'vconf haptic mm-keysound dlog libxml-2.0 glib-2.0' [ 86s] -- found vconf haptic mm-keysound dlog libxml-2.0 glib-2.0, version 0.2.45;0.1;1.0;1.0;2.7.8;2.32.3 [ 87s] -- Configuring done [ 87s] -- Generating done [ 87s] CMake Warning: [ 87s] Manually-specified variables were not used by the project: [ 87s] [ 87s] CMAKE_INSTALL_LIBDIR [ 87s] INCLUDE_INSTALL_DIR [ 87s] SHARE_INSTALL_PREFIX [ 87s] SYSCONF_INSTALL_DIR [ 87s] [ 87s] [ 87s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 [ 87s] + make [ 87s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 -B/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 --check-build-system CMakeFiles/Makefile.cmake 0 [ 87s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/progress.marks [ 87s] make -f CMakeFiles/Makefile2 all [ 87s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 87s] make -f CMakeFiles/feedback.dir/build.make CMakeFiles/feedback.dir/depend [ 87s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 87s] cd /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/feedback.dir/DependInfo.cmake --color= [ 87s] Scanning dependencies of target feedback [ 87s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 87s] make -f CMakeFiles/feedback.dir/build.make CMakeFiles/feedback.dir/build [ 87s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 87s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 1 [ 87s] [ 25%] Building C object CMakeFiles/feedback.dir/src/feedback.c.o [ 87s] /usr/bin/gcc -Dfeedback_EXPORTS -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -fPIC -I/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/include -o CMakeFiles/feedback.dir/src/feedback.c.o -c /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback.c [ 87s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 2 [ 87s] [ 50%] Building C object CMakeFiles/feedback.dir/src/feedback-internal.c.o [ 87s] /usr/bin/gcc -Dfeedback_EXPORTS -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -fPIC -I/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/include -o CMakeFiles/feedback.dir/src/feedback-internal.c.o -c /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c [ 87s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c: In function '_feedback_fini': [ 87s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c:382:24: warning: comparison between pointer and integer [ 87s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c: In function '_feedback_play_vibration': [ 87s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c:476:13: warning: comparison between pointer and integer [ 87s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/feedback-internal.c:468:14: warning: unused variable 'buf' [ 87s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 3 [ 87s] [ 75%] Building C object CMakeFiles/feedback.dir/src/xmlparser.c.o [ 87s] /usr/bin/gcc -Dfeedback_EXPORTS -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -fPIC -I/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/include -o CMakeFiles/feedback.dir/src/xmlparser.c.o -c /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/xmlparser.c [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/xmlparser.c:27:2: warning: pointer targets in initialization differ in signedness [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/xmlparser.c:28:2: warning: pointer targets in initialization differ in signedness [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/xmlparser.c: In function 'xml_parse': [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/xmlparser.c:128:5: warning: pointer targets in passing argument 2 of 'g_base64_decode' differ in signedness [ 88s] /usr/include/glib-2.0/glib/gbase64.h:49:9: note: expected 'gsize *' but argument is of type 'int *' [ 88s] Linking C shared library libfeedback.so [ 88s] /usr/bin/cmake -E cmake_link_script CMakeFiles/feedback.dir/link.txt --verbose=1 [ 88s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -shared -Wl,-soname,libfeedback.so.0 -o libfeedback.so.0.1.4 CMakeFiles/feedback.dir/src/feedback.c.o CMakeFiles/feedback.dir/src/feedback-internal.c.o CMakeFiles/feedback.dir/src/xmlparser.c.o -lvconf -lhaptic -lmmfkeysound -lmmfcommon -ldlog -lpthread -lxml2 -lglib-2.0 [ 88s] /usr/bin/cmake -E cmake_symlink_library libfeedback.so.0.1.4 libfeedback.so.0 libfeedback.so [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 1 2 3 [ 88s] [ 75%] Built target feedback [ 88s] make -f CMakeFiles/svi.dir/build.make CMakeFiles/svi.dir/depend [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] cd /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/svi.dir/DependInfo.cmake --color= [ 88s] Scanning dependencies of target svi [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] make -f CMakeFiles/svi.dir/build.make CMakeFiles/svi.dir/build [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 4 [ 88s] [100%] Building C object CMakeFiles/svi.dir/src/svi.c.o [ 88s] /usr/bin/gcc -Dsvi_EXPORTS -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -fPIC -I/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/include -o CMakeFiles/svi.dir/src/svi.c.o -c /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/svi.c [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/svi.c: In function 'svi_get_path': [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/svi.c:327:2: warning: implicit declaration of function 'free' [ 88s] /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/src/svi.c:327:2: warning: incompatible implicit declaration of built-in function 'free' [ 88s] Linking C shared library libsvi.so [ 88s] /usr/bin/cmake -E cmake_link_script CMakeFiles/svi.dir/link.txt --verbose=1 [ 88s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -I/usr/include/vconf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/haptic -I/usr/include/mmf -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/libxml2 -fvisibility=hidden -g -shared -Wl,-soname,libsvi.so.0 -o libsvi.so.0.1.4 CMakeFiles/svi.dir/src/svi.c.o -L/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 -lfeedback -lvconf -lhaptic -lmmfkeysound -lmmfcommon -ldlog -lpthread -lxml2 -lglib-2.0 [ 88s] /usr/bin/cmake -E cmake_symlink_library libsvi.so.0.1.4 libsvi.so.0 libsvi.so [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 4 [ 88s] [100%] Built target svi [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 0 [ 88s] + exit 0 [ 88s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.XnZJax [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd libfeedback-0.1.3 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 88s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm install [ 88s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 -B/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 --check-build-system CMakeFiles/Makefile.cmake 0 [ 88s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/progress.marks [ 88s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] /usr/bin/make -f CMakeFiles/feedback.dir/build.make CMakeFiles/feedback.dir/depend [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 88s] cd /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/feedback.dir/DependInfo.cmake --color= [ 89s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] /usr/bin/make -f CMakeFiles/feedback.dir/build.make CMakeFiles/feedback.dir/build [ 89s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] make[2]: Nothing to be done for `CMakeFiles/feedback.dir/build'. [ 89s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 1 2 3 [ 89s] [ 75%] Built target feedback [ 89s] /usr/bin/make -f CMakeFiles/svi.dir/build.make CMakeFiles/svi.dir/depend [ 89s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] cd /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles/svi.dir/DependInfo.cmake --color= [ 89s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] /usr/bin/make -f CMakeFiles/svi.dir/build.make CMakeFiles/svi.dir/build [ 89s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] make[2]: Nothing to be done for `CMakeFiles/svi.dir/build'. [ 89s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 4 [ 89s] [100%] Built target svi [ 89s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3/CMakeFiles 0 [ 89s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 89s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] make[1]: Nothing to be done for `preinstall'. [ 89s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libfeedback-0.1.3' [ 89s] Install the project... [ 89s] /usr/bin/cmake -P cmake_install.cmake [ 89s] -- Install configuration: "" [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/include/feedback/SLP_FEEDBACK_PG.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/include/feedback/feedback.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/include/feedback/feedback-ids.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/include/svi/svi.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/include/svi/svi-ids.h [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/haptic [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/haptic/touch [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/haptic/touch/touch.tht [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/haptic/default [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/haptic/default/Basic_call.tht [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/vibration.xml [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/shutter.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/lock.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/list_reorder.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/minute_minder.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/low_battery.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/call_connect.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/charger_connection.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/fully_charged.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/volume_control.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/unlock.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/call_disconnect.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/slider_sweep.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/operation/power_on.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key9.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key1.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key7.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key8.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key2.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/sip_backspace.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key3.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/keysharp.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key6.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key4.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/sip.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key0.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/key5.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/touch.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/svi/sound/touch/keyasterisk.wav [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libfeedback.so.0.1.4 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libfeedback.so.0 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libfeedback.so [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libsvi.so.0.1.4 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libsvi.so.0 [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libsvi.so [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/pkgconfig/feedback.pc [ 89s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/pkgconfig/svi.pc [ 89s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/share/info/dir [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm -regex '.*\.la$' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm -regex '.*\.a$' [ 89s] + xargs rm -f -- [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/opt/share/svi/sound/touch [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/opt/share/svi/sound/operation [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/opt/share/svi/haptic/default [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/opt/share/svi/haptic/touch [ 89s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libfeedback-0.1.3 [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libfeedback.so.0.1.4 [ 89s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm/usr/lib/libsvi.so.0.1.4 [ 89s] symlinked /usr/lib/debug/usr/lib/libsvi.so.0.1.4.debug to /usr/lib/debug/usr/lib/libsvi.so.0.debug [ 89s] symlinked /usr/lib/debug/usr/lib/libfeedback.so.0.1.4.debug to /usr/lib/debug/usr/lib/libfeedback.so.0.debug [ 89s] symlinked /usr/lib/debug/usr/lib/libsvi.so.0.1.4.debug to /usr/lib/debug/usr/lib/libsvi.so.debug [ 89s] symlinked /usr/lib/debug/usr/lib/libfeedback.so.0.1.4.debug to /usr/lib/debug/usr/lib/libfeedback.so.debug [ 89s] 128 blocks [ 89s] + /usr/lib/rpm/check-buildroot [ 89s] + /usr/lib/rpm//brp-compress [ 89s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 90s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 90s] + /usr/lib/rpm/brp-python-bytecompile [ 90s] + /usr/lib/rpm/brp-python-hardlink [ 90s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 90s] Processing files: libfeedback-0.1.3-1.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 90s] cXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii91c3IvYmluL3N2 [ 90s] aV90ZXN0IiBleGVjX2xhYmVsPSJfIi8+Cgk8L2Fzc2lnbj4KPC9tYW5pZmVzdD4K [ 90s] Cg== [ 90s] [ 90s] Provides: libfeedback.so.0 [ 90s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires(post): /sbin/ldconfig /sbin/ldconfig svi-data [ 90s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libhaptic.so.0.1 libmmfcommon.so.0 libmmfkeysound.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libvconf.so.0 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.6.0) [ 90s] Processing files: libfeedback-devel-0.1.3-1.1.armv7l [ 90s] Provides: pkgconfig(feedback) = 0.1.4 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires: /usr/bin/pkg-config libfeedback.so.0 pkgconfig(capi-base-common) [ 90s] Processing files: libsvi-0.1.3-1.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 90s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 90s] [ 91s] Provides: libsvi.so.0 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libfeedback.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libhaptic.so.0.1 libmmfcommon.so.0 libmmfkeysound.so.0 libpthread.so.0 libvconf.so.0 libxml2.so.2 [ 91s] Processing files: libsvi-devel-0.1.3-1.1.armv7l [ 91s] Provides: pkgconfig(svi) = 0.1.4 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /usr/bin/pkg-config libsvi.so.0 [ 91s] Processing files: svi-data-0.1.3-1.1.armv7l [ 91s] Aptk: PG1hbmlmZXN0PgoJPGRlZmluZT4KCQk8ZG9tYWluIG5hbWU9InN2aS1kYXRhIi8+ [ 91s] Cgk8L2RlZmluZT4KCTxyZXF1ZXN0PgoJCTxkb21haW4gbmFtZT0ic3ZpLWRhdGEi [ 91s] Lz4KCTwvcmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Requires(interp): /bin/sh /bin/sh [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires(post): /bin/sh [ 91s] Requires(postun): /bin/sh [ 91s] Processing files: libfeedback-debuginfo-0.1.3-1.1.armv7l [ 91s] Processing files: libfeedback-debugsource-0.1.3-1.1.armv7l [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/libfeedback-0.1.3-1.1.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-devel-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsvi-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libsvi-devel-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/svi-data-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-debuginfo-0.1.3-1.1.armv7l.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-debugsource-0.1.3-1.1.armv7l.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DpxY9Z [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd libfeedback-0.1.3 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libfeedback-0.1.3-1.1.arm [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] ... saving built packages [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-debuginfo-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-debugsource-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libfeedback-devel-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libsvi-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/libsvi-devel-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/RPMS/armv7l/svi-data-0.1.3-1.1.armv7l.rpm [ 92s] /home/abuild/rpmbuild/SRPMS/libfeedback-0.1.3-1.1.src.rpm [ 92s] [ 92s] w01 finished "build libfeedback.spec" at Wed Jul 17 06:42:26 UTC 2013. [ 92s] [ 95s] [ 88.170128] SysRq : Power Off [ 97s] [ 89.598615] Power down. [ 97s] build: extracting built packages... [ 97s] libfeedback-0.1.3-1.1.armv7l.rpm [ 97s] libfeedback-debuginfo-0.1.3-1.1.armv7l.rpm [ 97s] libfeedback-debugsource-0.1.3-1.1.armv7l.rpm [ 97s] libfeedback-devel-0.1.3-1.1.armv7l.rpm [ 97s] libsvi-0.1.3-1.1.armv7l.rpm [ 97s] libsvi-devel-0.1.3-1.1.armv7l.rpm [ 97s] svi-data-0.1.3-1.1.armv7l.rpm [ 97s] libfeedback-0.1.3-1.1.src.rpm