[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w16 started "build xorg-x11-utils.spec" at Wed Jul 17 06:20:47 UTC 2013. [ 0s] [ 0s] Building xorg-x11-utils for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '77d6262db1a0ad1aec8658d61bb83fea' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/xorg-x11-utils.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/xorg-x11-utils.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/xorg-x11-utils.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=unsafe -drive file=/srv/build/root_4/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_4/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[206]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 6915/2097152 files, 251750/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] [ 2.803978] EXT4-fs (vda): Cannot change data mode on remount [ 10s] mount: / not mounted or bad option [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] *********************************** [ 10s] VM_TYPE: kvm script: /.build/build [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/xorg-x11-utils.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/xorg-x11-utils.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] /bin/rpm [ 11s] /usr/bin/rpm2cpio [ 11s] /usr/bin/rpmdb [ 11s] /usr/bin/rpmquery [ 11s] /usr/bin/rpmsign [ 11s] /usr/bin/rpmverify [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 17s] [1/203] installing kernel-headers-3.0.15-1.1 [ 17s] [2/203] installing libX11-common-1.5.0-3.1 [ 17s] [3/203] installing tizen-release-2.2.0-1.1 [ 18s] [4/203] installing tzdata-2011h-1.1 [ 18s] [5/203] installing libgcc-4.5.3-1.2 [ 18s] [6/203] installing setup-0.1-1.1 [ 18s] [7/203] installing filesystem-0.1-1.1 [ 18s] warning: group lock does not exist - using root [ 18s] warning: group mail does not exist - using root [ 18s] [8/203] installing eglibc-2.13-1.9 [ 19s] [9/203] installing libstdc++-4.5.3-1.2 [ 19s] [10/203] installing eglibc-common-2.13-1.9 [ 20s] /var/tmp/rpm-tmp.LdGDcb: line 2: /usr/bin/xargs: No such file or directory [ 20s] [11/203] installing libstdc++-devel-4.5.3-1.2 [ 21s] [12/203] installing bash-4.1-3.1 [ 21s] [13/203] installing bzip2-libs-1.0.5-4.1 [ 21s] [14/203] installing cpio-2.8-3.1 [ 21s] [15/203] installing diffutils-3.0-3.1 [ 21s] [16/203] installing e2fsprogs-libs-1.41.9-2.6 [ 21s] [17/203] installing elfutils-libelf-0.152-1.7 [ 21s] [18/203] installing expat-2.0.1-8.1 [ 21s] [19/203] installing fdupes-1.40-42.1 [ 21s] [20/203] installing findutils-4.2.31-1.1 [ 21s] [21/203] installing gdbm-1.8.3-1.1 [ 21s] [22/203] installing libICE-1.0.8-1.1 [ 22s] [23/203] installing libXau-1.0.7-1.1 [ 22s] [24/203] installing libattr-2.4.44-7.2 [ 22s] [25/203] installing libgomp-4.5.3-1.2 [ 22s] [26/203] installing libidn-1.15-6.1 [ 22s] [27/203] installing liblua-5.1.4-6.1 [ 22s] [28/203] installing libuuid-2.20.2-6.1 [ 22s] [29/203] installing lzo-2.03-1.1 [ 22s] [30/203] installing m4-1.4.14-1.1 [ 22s] [31/203] installing make-3.81-1.1 [ 22s] [32/203] installing net-tools-1.60-87.4 [ 22s] [33/203] installing nspr-4.8.7-1.6 [ 23s] [34/203] installing nss-softokn-freebl-3.12.9-3.10 [ 23s] [35/203] installing patch-2.6.1.169-1.1 [ 23s] [36/203] installing pkgconfig-0.25-2.1 [ 23s] [37/203] installing popt-1.16-3.1 [ 23s] [38/203] installing readline-5.2-13.1 [ 23s] [39/203] installing sed-4.1.5-2.1 [ 23s] [40/203] installing sqlite-3.7.13-1.1 [ 23s] [41/203] installing xz-libs-5.0.3-1.1 [ 23s] [42/203] installing zlib-1.2.5-2.5 [ 23s] [43/203] installing gmp-5.0.1-1.1 [ 24s] [44/203] installing libpcre-7.7-3.1 [ 24s] [45/203] installing ncurses-libs-5.7-4.1 [ 24s] [46/203] installing build-compare-2009.10.14-26.5 [ 24s] [47/203] installing libpthread-stubs-0.3-2.1 [ 24s] [48/203] installing qemu.x86_64-1.2-1.1 [ 25s] [49/203] installing xorg-x11-proto-core-7.0.25-2.1 [ 25s] [50/203] installing xorg-x11-proto-dmx-2.3.1-2.1 [ 25s] [51/203] installing xorg-x11-proto-input-2.2-2.1 [ 25s] [52/203] installing xorg-x11-proto-kb-1.0.6-2.1 [ 25s] [53/203] installing xorg-x11-proto-randr-1.4-2.1 [ 26s] [54/203] installing xorg-x11-proto-record-1.14.2-2.1 [ 26s] [55/203] installing xorg-x11-proto-renderproto-0.11.1-2.1 [ 26s] [56/203] installing xorg-x11-proto-video-2.3.1-2.1 [ 26s] [57/203] installing xorg-x11-proto-xext-7.2.1-2.1 [ 26s] [58/203] installing xorg-x11-proto-xf86dga-2.1-2.1 [ 26s] [59/203] installing xorg-x11-proto-xf86vidmode-2.3.1-2.1 [ 26s] [60/203] installing xorg-x11-proto-xinerama-1.2.1-2.1 [ 26s] [61/203] installing xorg-x11-xutils-dev-7.7-1.1 [ 26s] [62/203] installing eglibc-headers-2.13-1.9 [ 26s] [63/203] installing libcap-2.21-1.1 [ 27s] [64/203] installing unzip-6.0-9.3 [ 27s] [65/203] installing zlib-devel-1.2.5-2.5 [ 27s] [66/203] installing c-ares-1.7.4-2.1 [ 27s] [67/203] installing freetype-2.4.9-1.1 [ 27s] [68/203] installing grep-2.5.1a-62.1 [ 27s] [69/203] installing libacl-2.2.49-2.1 [ 27s] [70/203] installing libfile-5.04-1.1 [ 27s] [71/203] installing libxcb-1.8.1-1.1 [ 27s] [72/203] installing lzo-minilzo-2.03-1.1 [ 27s] [73/203] installing mpfr-3.0.0-1.1 [ 28s] [74/203] installing ncurses-5.7-4.1 [ 28s] [75/203] installing binutils-2.22-1.1 [ 28s] [76/203] installing bzip2-1.0.5-4.1 [ 28s] [77/203] installing libSM-1.2.1-1.1 [ 28s] [78/203] installing libblkid-2.20.2-6.1 [ 28s] [79/203] installing xz-5.0.3-1.1 [ 28s] [80/203] installing elfutils-libs-0.152-1.7 [ 28s] [81/203] installing nss-3.12.9-3.10 [ 28s] [82/203] installing perl-5.12.1-61.6 [ 29s] [83/203] installing ncurses-base-5.7-4.1 [ 29s] [84/203] installing perl-HTML-Tagset-3.20-8.1 [ 30s] [85/203] installing perl-IO-Compress-Base-2.008-61.6 [ 30s] [86/203] installing perl-Module-Pluggable-3.60-61.6 [ 30s] [87/203] installing perl-Pod-Escapes-1.04-61.6 [ 30s] [88/203] installing perl-TimeDate-1.20-1.1 [ 30s] [89/203] installing eglibc-devel-2.13-1.9 [ 30s] [90/203] installing libICE-devel-1.0.8-1.1 [ 30s] [91/203] installing libXau-devel-1.0.7-1.1 [ 30s] [92/203] installing lzo-devel-2.03-1.1 [ 30s] [93/203] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 30s] [94/203] installing perl-devel-5.12.1-61.6 [ 30s] [95/203] installing perl-libs-5.12.1-61.6 [ 31s] [96/203] installing tar-1.17-4.1 [ 31s] [97/203] installing xcb-util-0.3.8-1.1 [ 31s] [98/203] installing coreutils-6.9-9.1 [ 31s] [99/203] installing file-5.04-1.1 [ 31s] [100/203] installing freetype-devel-2.4.9-1.1 [ 31s] [101/203] installing libX11-1.5.0-3.1 [ 31s] [102/203] installing libmount-2.20.2-6.1 [ 31s] [103/203] installing mpc-0.9-1.1 [ 38s] [104/203] installing openssl-1.0.1c-1.11 [ 38s] [105/203] installing xz-lzma-compat-5.0.3-1.1 [ 39s] [106/203] installing elfutils-0.152-1.7 [ 39s] [107/203] installing nss-sysinit-3.12.9-3.10 [ 39s] [108/203] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 40s] [109/203] installing perl-Pod-Simple-3.07-61.6 [ 40s] [110/203] installing perl-Test-Simple-0.80-61.6 [ 40s] [111/203] installing tizen-accelerator-1.0.1-1.1 [ 48s] [112/203] installing libXext-1.3.1-1.1 [ 48s] [113/203] installing libXpm-3.5.10-1.1 [ 48s] [114/203] installing libXrender-0.9.7-1.1 [ 48s] [115/203] installing perl-IO-Compress-Zlib-2.008-61.6 [ 48s] [116/203] installing perl-Test-Harness-3.12-61.6 [ 48s] [117/203] installing gawk-3.1.5-1.1 [ 48s] [118/203] installing gzip-1.3.14-2.1 [ 48s] [119/203] installing libSM-devel-1.2.1-1.1 [ 48s] [120/203] installing libxcb-devel-1.8.1-1.1 [ 48s] [121/203] installing build-2011.01.10a-1.1 [ 49s] [122/203] installing libXt-1.1.2-2.1 [ 49s] [123/203] installing libcurl-7.28.1-2.1 [ 49s] [124/203] installing cpp-4.5.3-1.2 [ 49s] [125/203] installing util-linux-2.20.2-6.1 [ 49s] warning: group tty does not exist - using root [ 49s] /bin/chown: `root:root': invalid user [ 49s] [126/203] installing fontconfig-2.9.0-2.1 [ 51s] [127/203] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 52s] [128/203] installing eglibc-x86-arm-2.13-9.1 [ 52s] [129/203] installing elfutils-libelf-x86-arm-0.152-9.1 [ 52s] [130/203] installing elfutils-libs-x86-arm-0.152-9.1 [ 52s] [131/203] installing fontconfig-devel-2.9.0-2.1 [ 52s] [132/203] installing gmp-x86-arm-5.0.1-9.1 [ 53s] [133/203] installing libacl-x86-arm-2.2.49-9.1 [ 53s] [134/203] installing libattr-x86-arm-2.4.44-9.1 [ 53s] [135/203] installing libcap-x86-arm-2.21-9.1 [ 53s] [136/203] installing libfile-x86-arm-5.04-9.1 [ 53s] [137/203] installing libgcc-x86-arm-4.5.3-9.1 [ 54s] [138/203] installing liblua-x86-arm-5.1.4-9.1 [ 54s] [139/203] installing mpc-x86-arm-0.9-9.1 [ 54s] [140/203] installing mpfr-x86-arm-3.0.0-9.1 [ 54s] [141/203] installing ncurses-libs-x86-arm-5.7-9.1 [ 54s] [142/203] installing nspr-x86-arm-4.8.7-9.1 [ 54s] [143/203] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 55s] [144/203] installing nss-x86-arm-3.12.9-9.1 [ 55s] [145/203] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 55s] [146/203] installing popt-x86-arm-1.16-9.1 [ 55s] [147/203] installing sqlite-x86-arm-3.7.13-9.1 [ 55s] [148/203] installing xcb-util-devel-0.3.8-1.1 [ 55s] [149/203] installing xz-libs-x86-arm-5.0.3-9.1 [ 56s] [150/203] installing zlib-x86-arm-1.2.5-7.1 [ 56s] [151/203] installing libXi-1.6.1-1.1 [ 56s] [152/203] installing libXinerama-1.1.2-1.1 [ 56s] [153/203] installing libXv-1.0.7-1.1 [ 56s] [154/203] installing libXxf86dga-1.1.3-1.1 [ 56s] [155/203] installing libXxf86vm-1.1.2-1.1 [ 56s] [156/203] installing libdmx-1.1.2-1.1 [ 56s] [157/203] installing libX11-devel-1.5.0-3.1 [ 57s] [158/203] installing libXmu-1.1.1-1.1 [ 57s] [159/203] installing libXrandr-1.4.0-3.1 [ 57s] [160/203] installing libXft-2.3.1-1.1 [ 57s] [161/203] installing curl-7.28.1-2.1 [ 57s] [162/203] installing gcc-4.5.3-1.2 [ 57s] [163/203] installing perl-CPAN-1.9205-61.6 [ 57s] [164/203] installing bash-x86-arm-4.1-7.1 [ 57s] [165/203] installing fdupes-x86-arm-1.40-9.1 [ 58s] [166/203] installing findutils-x86-arm-4.2.31-7.1 [ 58s] [167/203] installing gawk-x86-arm-3.1.5-7.1 [ 58s] [168/203] installing gzip-x86-arm-1.3.14-9.1 [ 58s] [169/203] installing make-x86-arm-3.81-8.1 [ 58s] [170/203] installing patch-x86-arm-2.6.1.169-7.1 [ 58s] [171/203] installing sed-x86-arm-4.1.5-9.1 [ 59s] /bin/sed.orig-arm already present - skipping. [ 59s] [172/203] installing diffutils-x86-arm-3.0-9.1 [ 59s] /usr/bin/cmp.orig-arm already present - skipping. [ 59s] /usr/bin/diff.orig-arm already present - skipping. [ 59s] /usr/bin/diff3.orig-arm already present - skipping. [ 59s] /usr/bin/sdiff.orig-arm already present - skipping. [ 59s] [173/203] installing libXext-devel-1.3.1-1.1 [ 59s] [174/203] installing libXrender-devel-0.9.7-1.1 [ 59s] [175/203] installing libXtst-1.2.0-3.1 [ 59s] [176/203] installing autoconf-2.68-1.1 [ 59s] [177/203] installing coreutils-x86-arm-6.9-7.1 [ 61s] [178/203] installing file-x86-arm-5.04-7.1 [ 61s] [179/203] installing libXt-devel-1.1.2-2.1 [ 62s] [180/203] installing tar-x86-arm-1.17-9.1 [ 62s] /bin/tar.orig-arm already present - skipping. [ 62s] [181/203] installing libXpm-devel-3.5.10-1.1 [ 62s] [182/203] installing elfutils-x86-arm-0.152-7.2 [ 62s] [183/203] installing gcc-c++-4.5.3-1.2 [ 62s] [184/203] installing rpm-4.9.1-4.1 [ 62s] [185/203] installing automake-1.11.1-3.1 [ 63s] [186/203] installing libXinerama-devel-1.1.2-1.1 [ 63s] [187/203] installing libXxf86dga-devel-1.1.3-1.1 [ 63s] [188/203] installing libXxf86vm-devel-1.1.2-1.1 [ 63s] [189/203] installing libdmx-devel-1.1.2-1.1 [ 63s] [190/203] installing libXft-devel-2.3.1-1.1 [ 63s] [191/203] installing libXmu-devel-1.1.1-1.1 [ 63s] [192/203] installing libXv-devel-1.0.7-1.1 [ 63s] [193/203] installing libXi-devel-1.6.1-1.1 [ 63s] [194/203] installing libXrandr-devel-1.4.0-3.1 [ 63s] [195/203] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 64s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 64s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 64s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 64s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 64s] [196/203] installing rpm-libs-4.9.1-4.1 [ 64s] [197/203] installing rpm-libs-x86-arm-4.9.1-10.1 [ 65s] [198/203] installing libtool-2.2.6b-1.1 [ 65s] [199/203] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 65s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 65s] [200/203] installing libXtst-devel-1.2.0-3.1 [ 65s] [201/203] installing rpm-build-4.9.1-4.1 [ 65s] [202/203] installing rpm-x86-arm-4.9.1-9.1 [ 65s] /bin/rpm.orig-arm already present - skipping. [ 65s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 65s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 65s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 65s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 65s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 66s] [203/203] installing rpm-build-x86-arm-4.9.1-9.1 [ 66s] /usr/bin/rpmbuild [ 66s] /usr/lib/rpm/debugedit [ 66s] now finalizing build dir... [ 66s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 69s] build target is armv7l-tizen-linux [ 69s] ----------------------------------------------------------------- [ 69s] I have the following modifications for xorg-x11-utils.spec: [ 69s] 6c6 [ 69s] < Release: 6 [ 69s] --- [ 69s] > Release: 6.1 [ 69s] ----------------------------------------------------------------- [ 69s] ----- building xorg-x11-utils.spec (user abuild) [ 69s] ----------------------------------------------------------------- [ 69s] ----------------------------------------------------------------- [ 69s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/77d6262db1a0ad1aec8658d61bb83fea-xorg-x11-utils' /home/abuild/rpmbuild/SOURCES/xorg-x11-utils.spec [ 69s] Building target platforms: armv7l-tizen-linux [ 69s] Building for target armv7l-tizen-linux [ 69s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.MCfA0A [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + rm -rf xorg-x11-utils-7.5 [ 69s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-utils-7.5.tar.gz [ 69s] + /bin/tar -xf - [ 69s] + STATUS=0 [ 69s] + '[' 0 -ne 0 ']' [ 69s] + cd xorg-x11-utils-7.5 [ 69s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 69s] + exit 0 [ 69s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.L4auDw [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd xorg-x11-utils-7.5 [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + LD_AS_NEEDED=1 [ 69s] + export LD_AS_NEEDED [ 69s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 69s] + pushd xdpyinfo [ 69s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 69s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 69s] configure: WARNING: unrecognized options: --disable-xprint [ 69s] checking for a BSD-compatible install... /usr/bin/install -c [ 70s] checking whether build environment is sane... yes [ 70s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 70s] checking for gawk... gawk [ 70s] checking whether make sets $(MAKE)... yes [ 70s] checking whether to enable maintainer-specific portions of Makefiles... no [ 70s] checking for style of include used by make... GNU [ 70s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 70s] checking for gcc... gcc [ 70s] checking whether the C compiler works... yes [ 70s] checking for C compiler default output file name... a.out [ 70s] checking for suffix of executables... [ 70s] checking whether we are cross compiling... no [ 70s] checking for suffix of object files... o [ 70s] checking whether we are using the GNU C compiler... yes [ 70s] checking whether gcc accepts -g... yes [ 71s] checking for gcc option to accept ISO C89... none needed [ 71s] checking dependency style of gcc... gcc3 [ 71s] checking for gcc option to accept ISO C99... -std=gnu99 [ 71s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 71s] checking for grep that handles long lines and -e... /bin/grep [ 71s] checking for egrep... /bin/grep -E [ 71s] checking for ANSI C header files... yes [ 71s] checking for sys/types.h... yes [ 71s] checking for sys/stat.h... yes [ 71s] checking for stdlib.h... yes [ 71s] checking for string.h... yes [ 71s] checking for memory.h... yes [ 71s] checking for strings.h... yes [ 71s] checking for inttypes.h... yes [ 71s] checking for stdint.h... yes [ 71s] checking for unistd.h... yes [ 71s] checking whether __clang__ is declared... no [ 71s] checking whether __INTEL_COMPILER is declared... no [ 71s] checking whether __SUNPRO_C is declared... no [ 71s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 71s] checking for pkg-config... /usr/bin/pkg-config [ 71s] checking pkg-config is at least version 0.9.0... yes [ 71s] checking build system type... armv7l-unknown-linux-gnueabi [ 71s] checking host system type... armv7l-unknown-linux-gnueabi [ 71s] checking for a sed that does not truncate output... /bin/sed [ 72s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 72s] checking for XDPYINFO... yes [ 72s] checking for DPY_X11... yes [ 72s] checking for DPY_XEXT... yes [ 72s] checking for X11/extensions/multibuf.h... yes [ 72s] checking for X11/extensions/XShm.h... yes [ 72s] checking for DPY_XKB... yes [ 72s] checking for X11/extensions/XKB.h... yes [ 72s] checking for X11/XKBlib.h... yes [ 72s] checking for DPY_XF86VIDMODE... yes [ 72s] checking for X11/extensions/xf86vmode.h... yes [ 72s] checking for X11/extensions/xf86vmstr.h... yes [ 72s] checking for X11/extensions/xf86vmproto.h... yes [ 72s] checking for DPY_XF86DGA... yes [ 72s] checking for X11/extensions/Xxf86dga.h... yes [ 73s] checking for X11/extensions/xf86dgaproto.h... yes [ 73s] checking for X11/extensions/xf86dga.h... yes [ 73s] checking for X11/extensions/xf86dgastr.h... yes [ 73s] checking for DPY_XF86MISC... no [ 73s] not found [ 73s] checking for DPY_XINPUT... yes [ 73s] checking for X11/extensions/XInput.h... yes [ 73s] checking for DPY_XRENDER... yes [ 73s] checking for X11/extensions/Xrender.h... yes [ 73s] checking for DPY_XCOMPOSITE... no [ 73s] not found [ 73s] checking for DPY_XINERAMA... yes [ 73s] checking for X11/extensions/Xinerama.h... yes [ 73s] checking for DPY_DMX... yes [ 73s] checking for X11/extensions/dmxext.h... yes [ 73s] checking for DPY_XTST... yes [ 73s] checking for X11/extensions/record.h... yes [ 73s] configure: creating ./config.status [ 74s] config.status: creating Makefile [ 74s] config.status: creating man/Makefile [ 74s] config.status: creating config.h [ 74s] config.status: executing depfiles commands [ 74s] configure: WARNING: unrecognized options: --disable-xprint [ 74s] + popd [ 74s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 74s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 74s] + pushd xev [ 74s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 74s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 74s] configure: WARNING: unrecognized options: --disable-xprint [ 74s] checking for a BSD-compatible install... /usr/bin/install -c [ 75s] checking whether build environment is sane... yes [ 75s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 75s] checking for gawk... gawk [ 75s] checking whether make sets $(MAKE)... yes [ 75s] checking whether to enable maintainer-specific portions of Makefiles... no [ 75s] checking for style of include used by make... GNU [ 75s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 75s] checking for gcc... gcc [ 75s] checking whether the C compiler works... yes [ 75s] checking for C compiler default output file name... a.out [ 75s] checking for suffix of executables... [ 75s] checking whether we are cross compiling... no [ 75s] checking for suffix of object files... o [ 75s] checking whether we are using the GNU C compiler... yes [ 75s] checking whether gcc accepts -g... yes [ 75s] checking for gcc option to accept ISO C89... none needed [ 75s] checking dependency style of gcc... gcc3 [ 75s] checking for gcc option to accept ISO C99... -std=gnu99 [ 76s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 76s] checking for grep that handles long lines and -e... /bin/grep [ 76s] checking for egrep... /bin/grep -E [ 76s] checking for ANSI C header files... yes [ 76s] checking for sys/types.h... yes [ 76s] checking for sys/stat.h... yes [ 76s] checking for stdlib.h... yes [ 76s] checking for string.h... yes [ 76s] checking for memory.h... yes [ 76s] checking for strings.h... yes [ 76s] checking for inttypes.h... yes [ 76s] checking for stdint.h... yes [ 76s] checking for unistd.h... yes [ 76s] checking whether __clang__ is declared... no [ 76s] checking whether __INTEL_COMPILER is declared... no [ 76s] checking whether __SUNPRO_C is declared... no [ 76s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 76s] checking for pkg-config... /usr/bin/pkg-config [ 76s] checking pkg-config is at least version 0.9.0... yes [ 76s] checking build system type... armv7l-unknown-linux-gnueabi [ 76s] checking host system type... armv7l-unknown-linux-gnueabi [ 76s] checking for a sed that does not truncate output... /bin/sed [ 76s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 76s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 76s] checking if gcc -std=gnu99 supports -Wall... yes [ 76s] checking if gcc -std=gnu99 supports -Wpointer-arith... yes [ 76s] checking if gcc -std=gnu99 supports -Wstrict-prototypes... yes [ 76s] checking if gcc -std=gnu99 supports -Wmissing-prototypes... yes [ 76s] checking if gcc -std=gnu99 supports -Wmissing-declarations... yes [ 76s] checking if gcc -std=gnu99 supports -Wnested-externs... yes [ 76s] checking if gcc -std=gnu99 supports -Wbad-function-cast... yes [ 76s] checking if gcc -std=gnu99 supports -Wformat=2... yes [ 76s] checking if gcc -std=gnu99 supports -Wold-style-definition... yes [ 77s] checking if gcc -std=gnu99 supports -Wdeclaration-after-statement... yes [ 77s] checking if gcc -std=gnu99 supports -Wunused... yes [ 77s] checking if gcc -std=gnu99 supports -Wuninitialized... yes [ 77s] checking if gcc -std=gnu99 supports -Wshadow... yes [ 77s] checking if gcc -std=gnu99 supports -Wcast-qual... yes [ 77s] checking if gcc -std=gnu99 supports -Wmissing-noreturn... yes [ 77s] checking if gcc -std=gnu99 supports -Wmissing-format-attribute... yes [ 77s] checking if gcc -std=gnu99 supports -Wredundant-decls... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=implicit... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=nonnull... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=init-self... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=main... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=missing-braces... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=sequence-point... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=return-type... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=trigraphs... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=array-bounds... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=write-strings... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=address... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=int-to-pointer-cast... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=pointer-to-int-cast... yes [ 77s] checking if gcc -std=gnu99 supports -pedantic... yes [ 77s] checking if gcc -std=gnu99 supports -Werror... yes [ 77s] checking if gcc -std=gnu99 supports -Werror=attributes... yes [ 77s] checking for XEV... yes [ 77s] configure: creating ./config.status [ 78s] config.status: creating Makefile [ 78s] config.status: creating man/Makefile [ 78s] config.status: creating config.h [ 78s] config.status: executing depfiles commands [ 78s] configure: WARNING: unrecognized options: --disable-xprint [ 78s] + popd [ 78s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 78s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 78s] + pushd xlsatoms [ 78s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 78s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 78s] + export CFLAGS [ 78s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 78s] + export CXXFLAGS [ 78s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 78s] + export FFLAGS [ 78s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 78s] configure: WARNING: unrecognized options: --disable-xprint [ 78s] checking for a BSD-compatible install... /usr/bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking whether to enable maintainer-specific portions of Makefiles... no [ 79s] checking for style of include used by make... GNU [ 79s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 79s] checking for gcc... gcc [ 79s] checking whether the C compiler works... yes [ 79s] checking for C compiler default output file name... a.out [ 79s] checking for suffix of executables... [ 79s] checking whether we are cross compiling... no [ 79s] checking for suffix of object files... o [ 79s] checking whether we are using the GNU C compiler... yes [ 79s] checking whether gcc accepts -g... yes [ 79s] checking for gcc option to accept ISO C89... none needed [ 79s] checking dependency style of gcc... gcc3 [ 79s] checking for gcc option to accept ISO C99... -std=gnu99 [ 80s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 80s] checking for grep that handles long lines and -e... /bin/grep [ 80s] checking for egrep... /bin/grep -E [ 80s] checking for ANSI C header files... yes [ 80s] checking for sys/types.h... yes [ 80s] checking for sys/stat.h... yes [ 80s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for memory.h... yes [ 80s] checking for strings.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking whether __clang__ is declared... no [ 80s] checking whether __INTEL_COMPILER is declared... no [ 80s] checking whether __SUNPRO_C is declared... no [ 80s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 80s] checking for pkg-config... /usr/bin/pkg-config [ 80s] checking pkg-config is at least version 0.9.0... yes [ 80s] checking build system type... armv7l-unknown-linux-gnueabi [ 80s] checking host system type... armv7l-unknown-linux-gnueabi [ 80s] checking for a sed that does not truncate output... /bin/sed [ 80s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 80s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 80s] checking if gcc -std=gnu99 supports-Wall... yes [ 80s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 80s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 80s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 80s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 80s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 80s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 80s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 81s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 81s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 81s] checking if gcc -std=gnu99 supports-Wunused... yes [ 81s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 81s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 81s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 81s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 81s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 81s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 81s] checking if gcc -std=gnu99 supports-pedantic... yes [ 81s] checking if gcc -std=gnu99 supports-Werror... yes [ 81s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 81s] checking for XLSATOMS... yes [ 81s] configure: creating ./config.status [ 82s] config.status: creating Makefile [ 82s] config.status: creating man/Makefile [ 82s] config.status: creating config.h [ 82s] config.status: executing depfiles commands [ 82s] configure: WARNING: unrecognized options: --disable-xprint [ 82s] + popd [ 82s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 82s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 82s] + pushd xlsclients [ 82s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 82s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 82s] + export CXXFLAGS [ 82s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 82s] + export FFLAGS [ 82s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 82s] configure: WARNING: unrecognized options: --disable-xprint [ 82s] checking for a BSD-compatible install... /usr/bin/install -c [ 83s] checking whether build environment is sane... yes [ 83s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 83s] checking for gawk... gawk [ 83s] checking whether make sets $(MAKE)... yes [ 83s] checking whether to enable maintainer-specific portions of Makefiles... no [ 83s] checking for style of include used by make... GNU [ 83s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 83s] checking for gcc... gcc [ 83s] checking whether the C compiler works... yes [ 83s] checking for C compiler default output file name... a.out [ 83s] checking for suffix of executables... [ 83s] checking whether we are cross compiling... no [ 83s] checking for suffix of object files... o [ 83s] checking whether we are using the GNU C compiler... yes [ 83s] checking whether gcc accepts -g... yes [ 83s] checking for gcc option to accept ISO C89... none needed [ 83s] checking dependency style of gcc... gcc3 [ 83s] checking how to run the C preprocessor... gcc -E [ 84s] checking for grep that handles long lines and -e... /bin/grep [ 84s] checking for egrep... /bin/grep -E [ 84s] checking for ANSI C header files... yes [ 84s] checking for sys/types.h... yes [ 84s] checking for sys/stat.h... yes [ 84s] checking for stdlib.h... yes [ 84s] checking for string.h... yes [ 84s] checking for memory.h... yes [ 84s] checking for strings.h... yes [ 84s] checking for inttypes.h... yes [ 84s] checking for stdint.h... yes [ 84s] checking for unistd.h... yes [ 84s] checking minix/config.h usability... no [ 84s] checking minix/config.h presence... no [ 84s] checking for minix/config.h... no [ 84s] checking whether it is safe to define __EXTENSIONS__... yes [ 84s] checking build system type... armv7l-unknown-linux-gnueabi [ 84s] checking host system type... armv7l-unknown-linux-gnueabi [ 84s] checking for working strnlen... yes [ 84s] checking for gcc option to accept ISO C99... -std=gnu99 [ 84s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 84s] checking for pkg-config... /usr/bin/pkg-config [ 84s] checking pkg-config is at least version 0.9.0... yes [ 84s] checking for a sed that does not truncate output... /bin/sed [ 84s] checking for XLSCLIENTS... yes [ 84s] configure: creating ./config.status [ 85s] config.status: creating Makefile [ 85s] config.status: creating man/Makefile [ 85s] config.status: creating config.h [ 85s] config.status: executing depfiles commands [ 85s] configure: WARNING: unrecognized options: --disable-xprint [ 85s] + popd [ 85s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 85s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 85s] + pushd xlsfonts [ 85s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsfonts ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 85s] configure: WARNING: unrecognized options: --disable-xprint [ 85s] checking for a BSD-compatible install... /usr/bin/install -c [ 86s] checking whether build environment is sane... yes [ 86s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 86s] checking for gawk... gawk [ 86s] checking whether make sets $(MAKE)... yes [ 86s] checking whether to enable maintainer-specific portions of Makefiles... no [ 86s] checking for style of include used by make... GNU [ 86s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 86s] checking for gcc... gcc [ 86s] checking whether the C compiler works... yes [ 86s] checking for C compiler default output file name... a.out [ 86s] checking for suffix of executables... [ 86s] checking whether we are cross compiling... no [ 86s] checking for suffix of object files... o [ 86s] checking whether we are using the GNU C compiler... yes [ 86s] checking whether gcc accepts -g... yes [ 86s] checking for gcc option to accept ISO C89... none needed [ 86s] checking dependency style of gcc... gcc3 [ 86s] checking how to run the C preprocessor... gcc -E [ 87s] checking for grep that handles long lines and -e... /bin/grep [ 87s] checking for egrep... /bin/grep -E [ 87s] checking for ANSI C header files... yes [ 87s] checking for sys/types.h... yes [ 87s] checking for sys/stat.h... yes [ 87s] checking for stdlib.h... yes [ 87s] checking for string.h... yes [ 87s] checking for memory.h... yes [ 87s] checking for strings.h... yes [ 87s] checking for inttypes.h... yes [ 87s] checking for stdint.h... yes [ 87s] checking for unistd.h... yes [ 87s] checking for gcc option to accept ISO C99... -std=gnu99 [ 87s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 87s] checking for pkg-config... /usr/bin/pkg-config [ 87s] checking pkg-config is at least version 0.9.0... yes [ 87s] checking build system type... armv7l-unknown-linux-gnueabi [ 87s] checking host system type... armv7l-unknown-linux-gnueabi [ 87s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc -std=gnu99 [ 87s] checking whether we are using the GNU C compiler... (cached) yes [ 87s] checking whether gcc -std=gnu99 accepts -g... (cached) yes [ 87s] checking for gcc -std=gnu99 option to accept ISO C89... (cached) none needed [ 87s] checking dependency style of gcc -std=gnu99... (cached) gcc3 [ 87s] checking for XLSFONTS... yes [ 87s] configure: creating ./config.status [ 88s] config.status: creating Makefile [ 88s] config.status: creating config.h [ 88s] config.status: executing depfiles commands [ 88s] configure: WARNING: unrecognized options: --disable-xprint [ 88s] + popd [ 88s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 88s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 88s] + pushd xprop [ 88s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 88s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 88s] + export CFLAGS [ 88s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 88s] + export CXXFLAGS [ 88s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 88s] + export FFLAGS [ 88s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 88s] configure: WARNING: unrecognized options: --disable-xprint [ 88s] checking for a BSD-compatible install... /usr/bin/install -c [ 89s] checking whether build environment is sane... yes [ 89s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 89s] checking for gawk... gawk [ 89s] checking whether make sets $(MAKE)... yes [ 89s] checking whether to enable maintainer-specific portions of Makefiles... no [ 89s] checking for style of include used by make... GNU [ 89s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 89s] checking for gcc... gcc [ 89s] checking whether the C compiler works... yes [ 89s] checking for C compiler default output file name... a.out [ 89s] checking for suffix of executables... [ 89s] checking whether we are cross compiling... no [ 89s] checking for suffix of object files... o [ 89s] checking whether we are using the GNU C compiler... yes [ 89s] checking whether gcc accepts -g... yes [ 89s] checking for gcc option to accept ISO C89... none needed [ 89s] checking dependency style of gcc... gcc3 [ 89s] checking for gcc option to accept ISO C99... -std=gnu99 [ 89s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 89s] checking for grep that handles long lines and -e... /bin/grep [ 89s] checking for egrep... /bin/grep -E [ 89s] checking for ANSI C header files... yes [ 90s] checking for sys/types.h... yes [ 90s] checking for sys/stat.h... yes [ 90s] checking for stdlib.h... yes [ 90s] checking for string.h... yes [ 90s] checking for memory.h... yes [ 90s] checking for strings.h... yes [ 90s] checking for inttypes.h... yes [ 90s] checking for stdint.h... yes [ 90s] checking for unistd.h... yes [ 90s] checking whether __clang__ is declared... no [ 90s] checking whether __INTEL_COMPILER is declared... no [ 90s] checking whether __SUNPRO_C is declared... no [ 90s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 90s] checking for pkg-config... /usr/bin/pkg-config [ 90s] checking pkg-config is at least version 0.9.0... yes [ 90s] checking build system type... armv7l-unknown-linux-gnueabi [ 90s] checking host system type... armv7l-unknown-linux-gnueabi [ 90s] checking for a sed that does not truncate output... /bin/sed [ 90s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 90s] checking wchar.h usability... yes [ 90s] checking wchar.h presence... yes [ 90s] checking for wchar.h... yes [ 90s] checking wctype.h usability... yes [ 90s] checking wctype.h presence... yes [ 90s] checking for wctype.h... yes [ 90s] checking langinfo.h usability... yes [ 90s] checking langinfo.h presence... yes [ 90s] checking for langinfo.h... yes [ 90s] checking for XPROP... yes [ 90s] configure: creating ./config.status [ 91s] config.status: creating Makefile [ 91s] config.status: creating man/Makefile [ 91s] config.status: creating config.h [ 91s] config.status: executing depfiles commands [ 91s] configure: WARNING: unrecognized options: --disable-xprint [ 91s] + popd [ 91s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 91s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 91s] + pushd xvinfo [ 91s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 91s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 91s] configure: WARNING: unrecognized options: --disable-xprint [ 91s] checking for a BSD-compatible install... /usr/bin/install -c [ 92s] checking whether build environment is sane... yes [ 92s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 92s] checking for gawk... gawk [ 92s] checking whether make sets $(MAKE)... yes [ 92s] checking whether to enable maintainer-specific portions of Makefiles... no [ 92s] checking for style of include used by make... GNU [ 92s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 92s] checking for gcc... gcc [ 92s] checking whether the C compiler works... yes [ 92s] checking for C compiler default output file name... a.out [ 92s] checking for suffix of executables... [ 92s] checking whether we are cross compiling... no [ 92s] checking for suffix of object files... o [ 92s] checking whether we are using the GNU C compiler... yes [ 92s] checking whether gcc accepts -g... yes [ 92s] checking for gcc option to accept ISO C89... none needed [ 92s] checking dependency style of gcc... gcc3 [ 92s] checking for gcc option to accept ISO C99... -std=gnu99 [ 92s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 93s] checking for grep that handles long lines and -e... /bin/grep [ 93s] checking for egrep... /bin/grep -E [ 93s] checking for ANSI C header files... yes [ 93s] checking for sys/types.h... yes [ 93s] checking for sys/stat.h... yes [ 93s] checking for stdlib.h... yes [ 93s] checking for string.h... yes [ 93s] checking for memory.h... yes [ 93s] checking for strings.h... yes [ 93s] checking for inttypes.h... yes [ 93s] checking for stdint.h... yes [ 93s] checking for unistd.h... yes [ 93s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 93s] checking for pkg-config... /usr/bin/pkg-config [ 93s] checking pkg-config is at least version 0.9.0... yes [ 93s] checking build system type... armv7l-unknown-linux-gnueabi [ 93s] checking host system type... armv7l-unknown-linux-gnueabi [ 93s] checking for a sed that does not truncate output... /bin/sed [ 93s] checking for XVINFO... yes [ 93s] configure: creating ./config.status [ 93s] config.status: creating Makefile [ 93s] config.status: creating config.h [ 93s] config.status: executing depfiles commands [ 93s] configure: WARNING: unrecognized options: --disable-xprint [ 93s] + popd [ 93s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 93s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 93s] + pushd xwininfo [ 93s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 93s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 93s] + export CXXFLAGS [ 93s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 93s] + export FFLAGS [ 93s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 94s] configure: WARNING: unrecognized options: --disable-xprint [ 94s] checking for a BSD-compatible install... /usr/bin/install -c [ 95s] checking whether build environment is sane... yes [ 95s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 95s] checking for gawk... gawk [ 95s] checking whether make sets $(MAKE)... yes [ 95s] checking whether to enable maintainer-specific portions of Makefiles... no [ 95s] checking for style of include used by make... GNU [ 95s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 95s] checking for gcc... gcc [ 95s] checking whether the C compiler works... yes [ 95s] checking for C compiler default output file name... a.out [ 95s] checking for suffix of executables... [ 95s] checking whether we are cross compiling... no [ 95s] checking for suffix of object files... o [ 95s] checking whether we are using the GNU C compiler... yes [ 95s] checking whether gcc accepts -g... yes [ 95s] checking for gcc option to accept ISO C89... none needed [ 95s] checking dependency style of gcc... gcc3 [ 95s] checking how to run the C preprocessor... gcc -E [ 95s] checking for grep that handles long lines and -e... /bin/grep [ 95s] checking for egrep... /bin/grep -E [ 95s] checking for ANSI C header files... yes [ 95s] checking for sys/types.h... yes [ 95s] checking for sys/stat.h... yes [ 95s] checking for stdlib.h... yes [ 95s] checking for string.h... yes [ 96s] checking for memory.h... yes [ 96s] checking for strings.h... yes [ 96s] checking for inttypes.h... yes [ 96s] checking for stdint.h... yes [ 96s] checking for unistd.h... yes [ 96s] checking minix/config.h usability... no [ 96s] checking minix/config.h presence... no [ 96s] checking for minix/config.h... no [ 96s] checking whether it is safe to define __EXTENSIONS__... yes [ 96s] checking for gcc option to accept ISO C99... -std=gnu99 [ 96s] checking whether __clang__ is declared... no [ 96s] checking whether __INTEL_COMPILER is declared... no [ 96s] checking whether __SUNPRO_C is declared... no [ 96s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 96s] checking for pkg-config... /usr/bin/pkg-config [ 96s] checking pkg-config is at least version 0.9.0... yes [ 96s] checking build system type... armv7l-unknown-linux-gnueabi [ 96s] checking host system type... armv7l-unknown-linux-gnueabi [ 96s] checking for a sed that does not truncate output... /bin/sed [ 96s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 96s] checking for strlcat... no [ 96s] checking for working strnlen... yes [ 96s] checking for library containing iconv... none required [ 96s] checking whether to use xcb-icccm library... no [ 96s] checking for XWININFO... yes [ 97s] checking for XLIB... yes [ 97s] configure: creating ./config.status [ 97s] config.status: creating Makefile [ 97s] config.status: creating man/Makefile [ 97s] config.status: creating config.h [ 97s] config.status: executing depfiles commands [ 97s] configure: WARNING: unrecognized options: --disable-xprint [ 97s] + popd [ 97s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 97s] + exit 0 [ 97s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.OtJhM9 [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd xorg-x11-utils-7.5 [ 97s] + LANG=C [ 97s] + export LANG [ 97s] + unset DISPLAY [ 97s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 97s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 97s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 97s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/license [ 97s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/license/xorg-x11-utils [ 97s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 97s] + pushd xdpyinfo [ 97s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 97s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 97s] Making install in man [ 97s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo/man' [ 97s] GEN xdpyinfo.1 [ 97s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo/man' [ 97s] make[2]: Nothing to be done for `install-exec-am'. [ 97s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 97s] /usr/bin/install -c -m 644 xdpyinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 97s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo/man' [ 97s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo/man' [ 97s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo' [ 97s] CC xdpyinfo.o [ 97s] CCLD xdpyinfo [ 97s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo' [ 97s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 98s] /usr/bin/install -c xdpyinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 98s] make[2]: Nothing to be done for `install-data-am'. [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xdpyinfo' [ 98s] + popd [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 98s] + pushd xev [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 98s] Making install in man [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev/man' [ 98s] GEN xev.1 [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev/man' [ 98s] make[2]: Nothing to be done for `install-exec-am'. [ 98s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 98s] /usr/bin/install -c -m 644 xev.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev/man' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev/man' [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev' [ 98s] CC xev.o [ 98s] CCLD xev [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev' [ 98s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 98s] /usr/bin/install -c xev '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 98s] make[2]: Nothing to be done for `install-data-am'. [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xev' [ 98s] + popd [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 98s] + pushd xlsatoms [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 98s] Making install in man [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms/man' [ 98s] GEN xlsatoms.1 [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms/man' [ 98s] make[2]: Nothing to be done for `install-exec-am'. [ 98s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 98s] /usr/bin/install -c -m 644 xlsatoms.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms/man' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms/man' [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms' [ 98s] CC xlsatoms.o [ 98s] xlsatoms.c: In function 'do_name': [ 98s] xlsatoms.c:137:2: warning: format not a string literal, argument types not checked [ 98s] xlsatoms.c: In function 'say_batch': [ 98s] xlsatoms.c:217:6: warning: format not a string literal, argument types not checked [ 98s] xlsatoms.c: In function 'usage': [ 98s] xlsatoms.c:50:1: warning: function might be possible candidate for attribute 'noreturn' [ 98s] CCLD xlsatoms [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms' [ 98s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 98s] /usr/bin/install -c xlsatoms '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 98s] make[2]: Nothing to be done for `install-data-am'. [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsatoms' [ 98s] + popd [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 98s] + pushd xlsclients [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 98s] Making install in man [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients/man' [ 98s] GEN xlsclients.1 [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients/man' [ 98s] make[2]: Nothing to be done for `install-exec-am'. [ 98s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 98s] /usr/bin/install -c -m 644 xlsclients.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients/man' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients/man' [ 98s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients' [ 98s] CC xlsclients.o [ 98s] xlsclients.c: In function 'show_client_properties': [ 98s] xlsclients.c:427:31: warning: 'name' may be used uninitialized in this function [ 98s] xlsclients.c:428:31: warning: 'icon_name' may be used uninitialized in this function [ 98s] xlsclients.c:429:31: warning: 'wm_class' may be used uninitialized in this function [ 98s] CCLD xlsclients [ 98s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients' [ 98s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 98s] /usr/bin/install -c xlsclients '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 98s] make[2]: Nothing to be done for `install-data-am'. [ 98s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients' [ 98s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsclients' [ 98s] + popd [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 98s] + pushd xlsfonts [ 98s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsfonts ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 98s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 98s] CC dsimple.o [ 98s] CC xlsfonts.o [ 99s] CCLD xlsfonts [ 99s] sed -e 's|__vendorversion__|"xlsfonts 1.0.3" "X Version 11"|' -e 's|__xorgversion__|"xlsfonts 1.0.3" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's|__xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__apploaddir__||' -e 's|__appmansuffix__|1|g' -e 's|__libmansuffix__|3|g' -e 's|__adminmansuffix__|8|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < xlsfonts.man > xlsfonts.1 [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsfonts' [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 99s] /usr/bin/install -c xlsfonts '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 99s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 99s] /usr/bin/install -c -m 644 xlsfonts.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xlsfonts' [ 99s] + popd [ 99s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 99s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 99s] + pushd xprop [ 99s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 99s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 99s] Making install in man [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop/man' [ 99s] GEN xprop.1 [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop/man' [ 99s] make[2]: Nothing to be done for `install-exec-am'. [ 99s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 99s] /usr/bin/install -c -m 644 xprop.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop/man' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop/man' [ 99s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop' [ 99s] CC dsimple.o [ 99s] CC clientwin.o [ 99s] CC xprop.o [ 99s] CCLD xprop [ 99s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop' [ 99s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 99s] /usr/bin/install -c xprop '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 99s] make[2]: Nothing to be done for `install-data-am'. [ 99s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop' [ 99s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xprop' [ 99s] + popd [ 99s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 99s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 99s] + pushd xvinfo [ 99s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 99s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 99s] CC xvinfo.o [ 99s] xvinfo.c: In function 'main': [ 99s] xvinfo.c:124:9: warning: suggest explicit braces to avoid ambiguous 'else' [ 100s] CCLD xvinfo [ 100s] GEN xvinfo.1 [ 100s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xvinfo' [ 100s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 100s] /usr/bin/install -c xvinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 100s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 100s] /usr/bin/install -c -m 644 xvinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 100s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xvinfo' [ 100s] + popd [ 100s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 100s] + for app in xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 100s] + pushd xwininfo [ 100s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 100s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 100s] Making install in man [ 100s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo/man' [ 100s] GEN xwininfo.1 [ 100s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo/man' [ 100s] make[2]: Nothing to be done for `install-exec-am'. [ 100s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1" [ 100s] /usr/bin/install -c -m 644 xwininfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man/man1' [ 100s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo/man' [ 100s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo/man' [ 100s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo' [ 100s] CC clientwin.o [ 100s] CC dsimple.o [ 100s] CC xwininfo.o [ 100s] xwininfo.c: In function 'main': [ 100s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [ 100s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [ 100s] xwininfo.c: In function 'Display_Window_Id': [ 100s] xwininfo.c:797:5: warning: format not a string literal, argument types not checked [ 100s] xwininfo.c: In function 'print_friendly_name': [ 100s] xwininfo.c:1970:5: warning: format not a string literal, argument types not checked [ 100s] xwininfo.c: In function 'print_utf8.clone.8': [ 100s] xwininfo.c:1824:19: warning: 'codepoint' may be used uninitialized in this function [ 100s] xwininfo.c:1824:19: note: 'codepoint' was declared here [ 100s] CCLD xwininfo [ 100s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo' [ 100s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin" [ 100s] /usr/bin/install -c xwininfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin' [ 100s] make[2]: Nothing to be done for `install-data-am'. [ 100s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo' [ 100s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5/xwininfo' [ 100s] + popd [ 100s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/info [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/doc [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/doc/xorg-x11-utils [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/gtk-doc [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/share/man [ 100s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm -regex '.*/man/man./.*.[0-9]' [ 100s] + xargs rm -f -- [ 100s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm -regex '.*/man/../man./.*.[0-9]' [ 100s] + xargs rm -f -- [ 100s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 100s] + xargs rm -f -- [ 100s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5 [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xdpyinfo [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xev [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xlsatoms [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xlsclients [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xlsfonts [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xprop [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xvinfo [ 101s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm/usr/bin/xwininfo [ 101s] 576 blocks [ 101s] + /usr/lib/rpm/check-buildroot [ 101s] + /usr/lib/rpm//brp-compress [ 101s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 102s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 102s] + /usr/lib/rpm/brp-python-bytecompile [ 102s] + /usr/lib/rpm/brp-python-hardlink [ 102s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 102s] Processing files: xorg-x11-utils-7.5-6.1.armv7l [ 102s] Provides: edid-decode xdpyinfo xev xlsatoms xlsclients xlsfonts xprop xvinfo xwininfo [ 102s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 102s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11-xcb.so.1 libX11.so.6 libXext.so.6 libXi.so.6 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXtst.so.6 libXv.so.1 libXxf86dga.so.1 libXxf86vm.so.1 libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdmx.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxcb-shape.so.0 libxcb.so.1 [ 102s] Processing files: xorg-x11-utils-debuginfo-7.5-6.1.armv7l [ 102s] Processing files: xorg-x11-utils-debugsource-7.5-6.1.armv7l [ 102s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 102s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5-6.1.src.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-7.5-6.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debuginfo-7.5-6.1.armv7l.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debugsource-7.5-6.1.armv7l.rpm [ 102s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5uFViV [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd xorg-x11-utils-7.5 [ 102s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 102s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5-6.1.arm [ 102s] + exit 0 [ 103s] ... checking for files with abuild user/group [ 103s] ... creating baselibs [ 104s] ... saving built packages [ 104s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-7.5-6.1.armv7l.rpm [ 104s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debuginfo-7.5-6.1.armv7l.rpm [ 104s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debugsource-7.5-6.1.armv7l.rpm [ 104s] /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5-6.1.src.rpm [ 104s] [ 104s] w16 finished "build xorg-x11-utils.spec" at Wed Jul 17 06:22:30 UTC 2013. [ 104s] [ 107s] [ 99.624948] SysRq : Power Off [ 108s] [ 101.149586] Power down. [ 109s] build: extracting built packages... [ 109s] xorg-x11-utils-7.5-6.1.armv7l.rpm [ 109s] xorg-x11-utils-debuginfo-7.5-6.1.armv7l.rpm [ 109s] xorg-x11-utils-debugsource-7.5-6.1.armv7l.rpm [ 109s] xorg-x11-utils-7.5-6.1.src.rpm