[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w17 started "build embryo.spec" at Wed Jul 17 06:24:54 UTC 2013. [ 0s] [ 0s] Building embryo for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '0a126121719b69004ff1e5d03f2bdf57' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/embryo.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/embryo.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/embryo.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm -> rpm-libs [ 0s] [1/56] preinstalling libgcc... [ 0s] [2/56] preinstalling setup... [ 0s] [3/56] preinstalling filesystem... [ 0s] [4/56] preinstalling eglibc... [ 0s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 1s] [23/56] preinstalling libcap... [ 1s] [24/56] preinstalling libacl... [ 1s] [25/56] preinstalling libfile... [ 1s] [26/56] preinstalling bzip2... [ 1s] [27/56] preinstalling nss... [ 1s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 2s] [54/56] preinstalling zlib-x86-arm... [ 2s] [55/56] preinstalling bash-x86-arm... [ 2s] [56/56] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm -> rpm-libs [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=unsafe -drive file=/srv/build/root_5/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_5/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 7s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] udevd[214]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 8s] [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.20.1 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 6807/2097152 files, 250809/8388608 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] [ 2.329368] EXT4-fs (vda): Cannot change data mode on remount [ 9s] mount: / not mounted or bad option [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] *********************************** [ 9s] VM_TYPE: kvm script: /.build/build [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/embryo.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/embryo.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 10s] /bin/rpm [ 10s] /usr/bin/rpm2cpio [ 10s] /usr/bin/rpmdb [ 10s] /usr/bin/rpmquery [ 10s] /usr/bin/rpmsign [ 10s] /usr/bin/rpmverify [ 10s] running rpm-libs-x86-arm postinstall script [ 10s] running tizen-accelerator postinstall script [ 10s] running bash-x86-arm postinstall script [ 10s] initializing rpm db... [ 14s] [1/149] installing kernel-headers-3.0.15-1.1 [ 14s] [2/149] installing tizen-release-2.2.0-1.1 [ 14s] [3/149] installing tzdata-2011h-1.1 [ 15s] [4/149] installing libgcc-4.5.3-1.2 [ 15s] [5/149] installing setup-0.1-1.1 [ 15s] [6/149] installing filesystem-0.1-1.1 [ 15s] warning: group lock does not exist - using root [ 15s] warning: group mail does not exist - using root [ 15s] [7/149] installing eglibc-2.13-1.9 [ 16s] [8/149] installing libstdc++-4.5.3-1.2 [ 16s] [9/149] installing eglibc-common-2.13-1.9 [ 17s] /var/tmp/rpm-tmp.2RTQ6w: line 2: /usr/bin/xargs: No such file or directory [ 17s] [10/149] installing libstdc++-devel-4.5.3-1.2 [ 17s] [11/149] installing bash-4.1-3.1 [ 17s] [12/149] installing bzip2-libs-1.0.5-4.1 [ 17s] [13/149] installing cpio-2.8-3.1 [ 17s] [14/149] installing diffutils-3.0-3.1 [ 17s] [15/149] installing e2fsprogs-libs-1.41.9-2.6 [ 18s] [16/149] installing elfutils-libelf-0.152-1.7 [ 18s] [17/149] installing fdupes-1.40-42.1 [ 18s] [18/149] installing findutils-4.2.31-1.1 [ 18s] [19/149] installing gdbm-1.8.3-1.1 [ 18s] [20/149] installing libattr-2.4.44-7.2 [ 18s] [21/149] installing libgomp-4.5.3-1.2 [ 18s] [22/149] installing libidn-1.15-6.1 [ 18s] [23/149] installing liblua-5.1.4-6.1 [ 18s] [24/149] installing libuuid-2.20.2-6.1 [ 18s] [25/149] installing lzo-2.03-1.1 [ 18s] [26/149] installing m4-1.4.14-1.1 [ 19s] [27/149] installing make-3.81-1.1 [ 19s] [28/149] installing net-tools-1.60-87.4 [ 19s] [29/149] installing nspr-4.8.7-1.6 [ 19s] [30/149] installing nss-softokn-freebl-3.12.9-3.10 [ 19s] [31/149] installing patch-2.6.1.169-1.1 [ 19s] [32/149] installing pkgconfig-0.25-2.1 [ 19s] [33/149] installing popt-1.16-3.1 [ 19s] [34/149] installing readline-5.2-13.1 [ 19s] [35/149] installing sed-4.1.5-2.1 [ 19s] [36/149] installing smack-1.0slp2+s11-1.1 [ 19s] [37/149] installing sqlite-3.7.13-1.1 [ 19s] [38/149] installing xz-libs-5.0.3-1.1 [ 20s] [39/149] installing zlib-1.2.5-2.5 [ 20s] [40/149] installing gmp-5.0.1-1.1 [ 20s] [41/149] installing libpcre-7.7-3.1 [ 20s] [42/149] installing ncurses-libs-5.7-4.1 [ 20s] [43/149] installing build-compare-2009.10.14-26.5 [ 20s] [44/149] installing qemu.x86_64-1.2-1.1 [ 21s] [45/149] installing eglibc-headers-2.13-1.9 [ 21s] [46/149] installing libcap-2.21-1.1 [ 21s] [47/149] installing unzip-6.0-9.3 [ 21s] [48/149] installing zlib-devel-1.2.5-2.5 [ 21s] [49/149] installing c-ares-1.7.4-2.1 [ 22s] [50/149] installing grep-2.5.1a-62.1 [ 22s] [51/149] installing libacl-2.2.49-2.1 [ 22s] [52/149] installing libfile-5.04-1.1 [ 22s] [53/149] installing lzo-minilzo-2.03-1.1 [ 22s] [54/149] installing mpfr-3.0.0-1.1 [ 22s] [55/149] installing ncurses-5.7-4.1 [ 22s] [56/149] installing binutils-2.22-1.1 [ 22s] [57/149] installing bzip2-1.0.5-4.1 [ 22s] [58/149] installing libblkid-2.20.2-6.1 [ 22s] [59/149] installing smack-utils-1.0slp2+s11-1.1 [ 23s] [60/149] installing xz-5.0.3-1.1 [ 23s] [61/149] installing elfutils-libs-0.152-1.7 [ 23s] [62/149] installing nss-3.12.9-3.10 [ 23s] [63/149] installing perl-5.12.1-61.6 [ 24s] [64/149] installing ncurses-base-5.7-4.1 [ 24s] [65/149] installing perl-HTML-Tagset-3.20-8.1 [ 24s] [66/149] installing perl-IO-Compress-Base-2.008-61.6 [ 24s] [67/149] installing perl-Module-Pluggable-3.60-61.6 [ 24s] [68/149] installing perl-Pod-Escapes-1.04-61.6 [ 24s] [69/149] installing perl-TimeDate-1.20-1.1 [ 24s] [70/149] installing eglibc-devel-2.13-1.9 [ 24s] [71/149] installing lzo-devel-2.03-1.1 [ 24s] [72/149] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 24s] [73/149] installing perl-devel-5.12.1-61.6 [ 24s] [74/149] installing perl-libs-5.12.1-61.6 [ 25s] [75/149] installing tar-1.17-4.1 [ 25s] [76/149] installing coreutils-6.9-9.1 [ 25s] [77/149] installing file-5.04-1.1 [ 25s] [78/149] installing libdlog-0.4.1-16.1 [ 25s] chown: `root:app_logging': invalid user [ 25s] [79/149] installing libmount-2.20.2-6.1 [ 25s] [80/149] installing mpc-0.9-1.1 [ 25s] [81/149] installing openssl-1.0.1c-1.11 [ 25s] [82/149] installing xz-lzma-compat-5.0.3-1.1 [ 25s] [83/149] installing elfutils-0.152-1.7 [ 25s] [84/149] installing nss-sysinit-3.12.9-3.10 [ 26s] [85/149] installing libdlog-devel-0.4.1-16.1 [ 26s] [86/149] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 26s] [87/149] installing perl-Pod-Simple-3.07-61.6 [ 26s] [88/149] installing perl-Test-Simple-0.80-61.6 [ 26s] [89/149] installing tizen-accelerator-1.0.1-1.1 [ 26s] [90/149] installing eina-1.7.1+svn.77445+build06-1.1 [ 26s] [91/149] installing perl-IO-Compress-Zlib-2.008-61.6 [ 26s] [92/149] installing perl-Test-Harness-3.12-61.6 [ 26s] [93/149] installing gawk-3.1.5-1.1 [ 26s] [94/149] installing gzip-1.3.14-2.1 [ 26s] [95/149] installing build-2011.01.10a-1.1 [ 27s] [96/149] installing libcurl-7.28.1-2.1 [ 27s] [97/149] installing cpp-4.5.3-1.2 [ 27s] [98/149] installing util-linux-2.20.2-6.1 [ 27s] warning: group tty does not exist - using root [ 27s] /bin/chown: `root:root': invalid user [ 27s] [99/149] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 27s] [100/149] installing eglibc-x86-arm-2.13-9.1 [ 27s] [101/149] installing eina-devel-1.7.1+svn.77445+build06-1.1 [ 28s] [102/149] installing elfutils-libelf-x86-arm-0.152-9.1 [ 28s] [103/149] installing elfutils-libs-x86-arm-0.152-9.1 [ 28s] [104/149] installing gmp-x86-arm-5.0.1-9.1 [ 28s] [105/149] installing libacl-x86-arm-2.2.49-9.1 [ 28s] [106/149] installing libattr-x86-arm-2.4.44-9.1 [ 28s] [107/149] installing libcap-x86-arm-2.21-9.1 [ 28s] [108/149] installing libfile-x86-arm-5.04-9.1 [ 29s] [109/149] installing libgcc-x86-arm-4.5.3-9.1 [ 29s] [110/149] installing liblua-x86-arm-5.1.4-9.1 [ 29s] [111/149] installing mpc-x86-arm-0.9-9.1 [ 29s] [112/149] installing mpfr-x86-arm-3.0.0-9.1 [ 29s] [113/149] installing ncurses-libs-x86-arm-5.7-9.1 [ 29s] [114/149] installing nspr-x86-arm-4.8.7-9.1 [ 30s] [115/149] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 30s] [116/149] installing nss-x86-arm-3.12.9-9.1 [ 30s] [117/149] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 30s] [118/149] installing popt-x86-arm-1.16-9.1 [ 30s] [119/149] installing sqlite-x86-arm-3.7.13-9.1 [ 30s] [120/149] installing xz-libs-x86-arm-5.0.3-9.1 [ 31s] [121/149] installing zlib-x86-arm-1.2.5-7.1 [ 31s] [122/149] installing curl-7.28.1-2.1 [ 31s] [123/149] installing gcc-4.5.3-1.2 [ 31s] [124/149] installing perl-CPAN-1.9205-61.6 [ 31s] [125/149] installing bash-x86-arm-4.1-7.1 [ 31s] [126/149] installing fdupes-x86-arm-1.40-9.1 [ 32s] [127/149] installing findutils-x86-arm-4.2.31-7.1 [ 33s] [128/149] installing gawk-x86-arm-3.1.5-7.1 [ 33s] [129/149] installing gzip-x86-arm-1.3.14-9.1 [ 34s] [130/149] installing make-x86-arm-3.81-8.1 [ 34s] [131/149] installing patch-x86-arm-2.6.1.169-7.1 [ 34s] [132/149] installing sed-x86-arm-4.1.5-9.1 [ 34s] /bin/sed.orig-arm already present - skipping. [ 34s] [133/149] installing diffutils-x86-arm-3.0-9.1 [ 34s] /usr/bin/cmp.orig-arm already present - skipping. [ 34s] /usr/bin/diff.orig-arm already present - skipping. [ 34s] /usr/bin/diff3.orig-arm already present - skipping. [ 34s] /usr/bin/sdiff.orig-arm already present - skipping. [ 34s] [134/149] installing autoconf-2.68-1.1 [ 34s] [135/149] installing coreutils-x86-arm-6.9-7.1 [ 36s] [136/149] installing file-x86-arm-5.04-7.1 [ 36s] [137/149] installing tar-x86-arm-1.17-9.1 [ 36s] /bin/tar.orig-arm already present - skipping. [ 36s] [138/149] installing elfutils-x86-arm-0.152-7.2 [ 37s] [139/149] installing gcc-c++-4.5.3-1.2 [ 37s] [140/149] installing rpm-4.9.1-4.1 [ 37s] [141/149] installing automake-1.11.1-3.1 [ 37s] [142/149] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 38s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 38s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 38s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 38s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 38s] [143/149] installing rpm-libs-4.9.1-4.1 [ 38s] [144/149] installing rpm-libs-x86-arm-4.9.1-10.1 [ 39s] [145/149] installing libtool-2.2.6b-1.1 [ 39s] [146/149] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 39s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 39s] [147/149] installing rpm-build-4.9.1-4.1 [ 39s] [148/149] installing rpm-x86-arm-4.9.1-9.1 [ 39s] /bin/rpm.orig-arm already present - skipping. [ 39s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 39s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 39s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 39s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 39s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 39s] [149/149] installing rpm-build-x86-arm-4.9.1-9.1 [ 39s] /usr/bin/rpmbuild [ 39s] /usr/lib/rpm/debugedit [ 39s] now finalizing build dir... [ 40s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 42s] build target is armv7l-tizen-linux [ 42s] ----------------------------------------------------------------- [ 42s] I have the following modifications for embryo.spec: [ 42s] 5c5 [ 42s] < Release: 1 [ 42s] --- [ 42s] > Release: 1.1 [ 42s] ----------------------------------------------------------------- [ 42s] ----- building embryo.spec (user abuild) [ 42s] ----------------------------------------------------------------- [ 42s] ----------------------------------------------------------------- [ 42s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/0a126121719b69004ff1e5d03f2bdf57-embryo' /home/abuild/rpmbuild/SOURCES/embryo.spec [ 42s] Building target platforms: armv7l-tizen-linux [ 42s] Building for target armv7l-tizen-linux [ 42s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Kz9XWr [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + rm -rf embryo-1.7.1+svn.76491slp2+build01 [ 42s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/embryo-1.7.1+svn.76491slp2+build01.tar.gz [ 42s] + /bin/tar -xf - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Sy7BuO [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LD_AS_NEEDED=1 [ 43s] + export LD_AS_NEEDED [ 43s] + export 'CFLAGS+= -fvisibility=hidden -fPIC' [ 43s] + CFLAGS+=' -fvisibility=hidden -fPIC' [ 43s] + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 43s] + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 43s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 43s] Running aclocal... [ 53s] sh: svnversion: command not found [ 58s] Running autoheader... [ 61s] sh: svnversion: command not found [ 66s] Running autoconf... [ 72s] Running libtoolize... [ 72s] Running automake... [ 76s] configure.ac:139: installing `./compile' [ 76s] configure.ac:38: installing `./config.guess' [ 76s] configure.ac:38: installing `./config.sub' [ 76s] configure.ac:35: installing `./install-sh' [ 76s] configure.ac:35: installing `./missing' [ 76s] doc/Makefile.am:33: wildcard img/*.*: non-POSIX variable name [ 76s] doc/Makefile.am:33: (probably a GNU make extension) [ 78s] src/bin/Makefile.am: installing `./depcomp' [ 81s] cmp: config.cache-env: No such file or directory [ 81s] Cleaning configure cache... [ 81s] configure: creating cache config.cache [ 81s] checking for a BSD-compatible install... /usr/bin/install -c [ 82s] checking whether build environment is sane... yes [ 82s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 82s] checking for gawk... gawk [ 82s] checking whether make sets $(MAKE)... yes [ 82s] checking build system type... armv7l-unknown-linux-gnueabi [ 82s] checking host system type... armv7l-unknown-linux-gnueabi [ 82s] checking for style of include used by make... GNU [ 82s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 82s] checking for gcc... gcc [ 82s] checking whether the C compiler works... yes [ 82s] checking for C compiler default output file name... a.out [ 82s] checking for suffix of executables... [ 82s] checking whether we are cross compiling... no [ 82s] checking for suffix of object files... o [ 82s] checking whether we are using the GNU C compiler... yes [ 82s] checking whether gcc accepts -g... yes [ 83s] checking for gcc option to accept ISO C89... none needed [ 83s] checking dependency style of gcc... gcc3 [ 83s] checking for a sed that does not truncate output... /bin/sed [ 83s] checking for grep that handles long lines and -e... /bin/grep [ 83s] checking for egrep... /bin/grep -E [ 83s] checking for fgrep... /bin/grep -F [ 83s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 83s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 83s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 83s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 83s] checking whether ln -s works... yes [ 83s] checking the maximum length of command line arguments... 1572864 [ 83s] checking whether the shell understands some XSI constructs... yes [ 83s] checking whether the shell understands "+="... yes [ 83s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 83s] checking for armv7l-unknown-linux-gnueabi-objdump... objdump [ 83s] checking how to recognize dependent libraries... pass_all [ 83s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 83s] checking for ar... ar [ 83s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 83s] checking for strip... strip [ 83s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 83s] checking for ranlib... ranlib [ 83s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 83s] checking how to run the C preprocessor... gcc -E [ 83s] checking for ANSI C header files... yes [ 83s] checking for sys/types.h... yes [ 83s] checking for sys/stat.h... yes [ 83s] checking for stdlib.h... yes [ 83s] checking for string.h... yes [ 83s] checking for memory.h... yes [ 83s] checking for strings.h... yes [ 83s] checking for inttypes.h... yes [ 83s] checking for stdint.h... yes [ 83s] checking for unistd.h... yes [ 83s] checking for dlfcn.h... yes [ 83s] checking for objdir... .libs [ 83s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 83s] checking for gcc option to produce PIC... -fPIC -DPIC [ 83s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 84s] checking if gcc static flag -static works... no [ 84s] checking if gcc supports -c -o file.o... yes [ 84s] checking if gcc supports -c -o file.o... (cached) yes [ 84s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 84s] checking whether -lc should be explicitly linked in... no [ 84s] checking dynamic linker characteristics... GNU/Linux ld.so [ 84s] checking how to hardcode library paths into programs... immediate [ 84s] checking whether stripping libraries is possible... yes [ 84s] checking if libtool supports shared libraries... yes [ 84s] checking whether to build shared libraries... yes [ 84s] checking whether to build static libraries... no [ 84s] checking whether to build embryo_cc binary... yes [ 84s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 84s] checking whether we are using the GNU C compiler... (cached) yes [ 84s] checking whether gcc accepts -g... (cached) yes [ 84s] checking for gcc option to accept ISO C89... (cached) none needed [ 84s] checking dependency style of gcc... (cached) gcc3 [ 84s] checking whether to build documentation... yes [ 84s] checking for doxygen... no [ 84s] WARNING: [ 84s] The doxygen program was not found in your execute path. [ 84s] You may have doxygen installed somewhere not covered by your path. [ 84s] [ 84s] If this is the case make sure you have the packages installed, AND [ 84s] that the doxygen program is in your execute path (see your [ 84s] shell manual page on setting the $PATH environment variable), OR [ 84s] alternatively, specify the program to use with --with-doxygen. [ 84s] configure: WARNING: no doxygen detected. Documentation will not be built [ 84s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 84s] checking for pkg-config... /usr/bin/pkg-config [ 84s] checking pkg-config is at least version 0.9.0... yes [ 84s] checking for EINA... yes [ 84s] checking for EXOTIC... no [ 84s] checking for unistd.h... (cached) yes [ 84s] checking for PATH_MAX in limits.h... yes [ 84s] checking whether byte ordering is bigendian... no [ 84s] checking whether gcc and cc understand -c and -o together... yes [ 84s] checking for an ANSI C-conforming const... yes [ 84s] checking for inline... inline [ 84s] checking for gcc option to accept ISO C99... -std=gnu99 [ 84s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 84s] checking for ANSI C header files... (cached) yes [ 84s] checking for __attribute__... yes [ 84s] checking for library containing strerror... none required [ 84s] checking for size_t... yes [ 84s] checking for working alloca.h... yes [ 84s] checking for alloca... yes [ 84s] checking fnmatch.h usability... yes [ 84s] checking fnmatch.h presence... yes [ 84s] checking for fnmatch.h... yes [ 84s] checking for library containing fnmatch... none required [ 85s] configure: updating cache config.cache [ 85s] configure: creating ./config.status [ 85s] config.status: creating Makefile [ 85s] config.status: creating doc/Makefile [ 85s] config.status: creating doc/Doxyfile [ 85s] config.status: creating doc/embryo.dox [ 85s] config.status: creating embryo.pc [ 85s] config.status: creating include/Makefile [ 85s] config.status: creating src/Makefile [ 85s] config.status: creating src/lib/Makefile [ 85s] config.status: creating src/bin/Makefile [ 85s] config.status: creating embryo.spec [ 85s] config.status: creating config.h [ 85s] config.status: executing depfiles commands [ 85s] config.status: executing libtool commands [ 85s] [ 85s] [ 85s] [ 85s] ------------------------------------------------------------------------ [ 85s] embryo 1.7.99.0 [ 85s] ------------------------------------------------------------------------ [ 85s] [ 85s] Configuration Options Summary: [ 85s] [ 85s] Build embryo_cc......: yes [ 85s] [ 85s] Documentation........: no [ 85s] [ 85s] Compilation............: make (or gmake) [ 85s] CPPFLAGS.............: [ 85s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC [ 85s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 85s] [ 85s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 85s] prefix...............: /usr [ 85s] [ 85s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 86s] checking for a BSD-compatible install... /usr/bin/install -c [ 87s] checking whether build environment is sane... yes [ 87s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 87s] checking for gawk... gawk [ 87s] checking whether make sets $(MAKE)... yes [ 87s] checking build system type... armv7l-unknown-linux-gnueabi [ 87s] checking host system type... armv7l-unknown-linux-gnueabi [ 87s] checking for style of include used by make... GNU [ 87s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 87s] checking for gcc... gcc [ 87s] checking whether the C compiler works... yes [ 87s] checking for C compiler default output file name... a.out [ 87s] checking for suffix of executables... [ 87s] checking whether we are cross compiling... no [ 87s] checking for suffix of object files... o [ 87s] checking whether we are using the GNU C compiler... yes [ 87s] checking whether gcc accepts -g... yes [ 87s] checking for gcc option to accept ISO C89... none needed [ 87s] checking dependency style of gcc... gcc3 [ 87s] checking for a sed that does not truncate output... /bin/sed [ 87s] checking for grep that handles long lines and -e... /bin/grep [ 87s] checking for egrep... /bin/grep -E [ 87s] checking for fgrep... /bin/grep -F [ 87s] checking for ld used by gcc... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 87s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 87s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 87s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 87s] checking whether ln -s works... yes [ 87s] checking the maximum length of command line arguments... 1572864 [ 87s] checking whether the shell understands some XSI constructs... yes [ 87s] checking whether the shell understands "+="... yes [ 87s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 87s] checking for armv7l-unknown-linux-gnueabi-objdump... objdump [ 87s] checking how to recognize dependent libraries... pass_all [ 87s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 87s] checking for ar... ar [ 87s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 87s] checking for strip... strip [ 87s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 87s] checking for ranlib... ranlib [ 87s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 87s] checking how to run the C preprocessor... gcc -E [ 87s] checking for ANSI C header files... yes [ 87s] checking for sys/types.h... yes [ 87s] checking for sys/stat.h... yes [ 87s] checking for stdlib.h... yes [ 87s] checking for string.h... yes [ 87s] checking for memory.h... yes [ 87s] checking for strings.h... yes [ 87s] checking for inttypes.h... yes [ 88s] checking for stdint.h... yes [ 88s] checking for unistd.h... yes [ 88s] checking for dlfcn.h... yes [ 88s] checking for objdir... .libs [ 88s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 88s] checking for gcc option to produce PIC... -fPIC -DPIC [ 88s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 88s] checking if gcc static flag -static works... no [ 88s] checking if gcc supports -c -o file.o... yes [ 88s] checking if gcc supports -c -o file.o... (cached) yes [ 88s] checking whether the gcc linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 88s] checking whether -lc should be explicitly linked in... no [ 88s] checking dynamic linker characteristics... GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking whether stripping libraries is possible... yes [ 88s] checking if libtool supports shared libraries... yes [ 88s] checking whether to build shared libraries... yes [ 88s] checking whether to build static libraries... no [ 88s] checking whether to build embryo_cc binary... yes [ 88s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 88s] checking whether we are using the GNU C compiler... (cached) yes [ 88s] checking whether gcc accepts -g... (cached) yes [ 88s] checking for gcc option to accept ISO C89... (cached) none needed [ 88s] checking dependency style of gcc... (cached) gcc3 [ 88s] checking whether to build documentation... yes [ 88s] checking for doxygen... no [ 88s] WARNING: [ 88s] The doxygen program was not found in your execute path. [ 88s] You may have doxygen installed somewhere not covered by your path. [ 88s] [ 88s] If this is the case make sure you have the packages installed, AND [ 88s] that the doxygen program is in your execute path (see your [ 88s] shell manual page on setting the $PATH environment variable), OR [ 88s] alternatively, specify the program to use with --with-doxygen. [ 88s] configure: WARNING: no doxygen detected. Documentation will not be built [ 88s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 88s] checking for pkg-config... /usr/bin/pkg-config [ 88s] checking pkg-config is at least version 0.9.0... yes [ 88s] checking for EINA... yes [ 88s] checking for EXOTIC... no [ 88s] checking for unistd.h... (cached) yes [ 88s] checking for PATH_MAX in limits.h... yes [ 88s] checking whether byte ordering is bigendian... no [ 88s] checking whether gcc and cc understand -c and -o together... yes [ 88s] checking for an ANSI C-conforming const... yes [ 88s] checking for inline... inline [ 88s] checking for gcc option to accept ISO C99... -std=gnu99 [ 88s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 88s] checking for ANSI C header files... (cached) yes [ 88s] checking for __attribute__... yes [ 88s] checking for library containing strerror... none required [ 88s] checking for size_t... yes [ 88s] checking for working alloca.h... yes [ 89s] checking for alloca... yes [ 89s] checking fnmatch.h usability... yes [ 89s] checking fnmatch.h presence... yes [ 89s] checking for fnmatch.h... yes [ 89s] checking for library containing fnmatch... none required [ 89s] configure: creating ./config.status [ 89s] config.status: creating Makefile [ 89s] config.status: creating doc/Makefile [ 89s] config.status: creating doc/Doxyfile [ 89s] config.status: creating doc/embryo.dox [ 89s] config.status: creating embryo.pc [ 89s] config.status: creating include/Makefile [ 89s] config.status: creating src/Makefile [ 89s] config.status: creating src/lib/Makefile [ 89s] config.status: creating src/bin/Makefile [ 89s] config.status: creating embryo.spec [ 89s] config.status: creating config.h [ 89s] config.status: config.h is unchanged [ 89s] config.status: executing depfiles commands [ 89s] config.status: executing libtool commands [ 89s] [ 89s] [ 89s] [ 89s] ------------------------------------------------------------------------ [ 89s] embryo 1.7.99.0 [ 89s] ------------------------------------------------------------------------ [ 89s] [ 89s] Configuration Options Summary: [ 89s] [ 89s] Build embryo_cc......: yes [ 89s] [ 89s] Documentation........: no [ 89s] [ 89s] Compilation............: make (or gmake) [ 89s] CPPFLAGS.............: [ 89s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC [ 89s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 89s] [ 89s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 89s] prefix...............: /usr [ 89s] [ 89s] + make -j4 [ 89s] make all-recursive [ 89s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 89s] Making all in src [ 89s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 89s] Making all in lib [ 89s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 89s] CC libembryo_la-embryo_amx.lo [ 89s] CC libembryo_la-embryo_args.lo [ 89s] CC libembryo_la-embryo_float.lo [ 89s] CC libembryo_la-embryo_main.lo [ 89s] CC libembryo_la-embryo_rand.lo [ 89s] CC libembryo_la-embryo_str.lo [ 90s] CC libembryo_la-embryo_time.lo [ 90s] CCLD libembryo.la [ 90s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 90s] Making all in bin [ 90s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 90s] CC embryo_cc-embryo_cc_sc1.o [ 90s] CC embryo_cc-embryo_cc_sc3.o [ 90s] CC embryo_cc-embryo_cc_sc2.o [ 90s] CC embryo_cc-embryo_cc_sc4.o [ 90s] CC embryo_cc-embryo_cc_sc5.o [ 90s] CC embryo_cc-embryo_cc_sc6.o [ 91s] CC embryo_cc-embryo_cc_sc7.o [ 91s] CC embryo_cc-embryo_cc_scexpand.o [ 91s] CC embryo_cc-embryo_cc_sclist.o [ 91s] CC embryo_cc-embryo_cc_scvars.o [ 91s] CC embryo_cc-embryo_cc_prefix.o [ 91s] CCLD embryo_cc [ 91s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 91s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[3]: Nothing to be done for `all-am'. [ 91s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] Making all in include [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] make[2]: Nothing to be done for `all'. [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] Making all in doc [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[2]: Nothing to be done for `all'. [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] + exit 0 [ 91s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.r6P7r8 [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm [ 91s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm install [ 91s] Making install in src [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] Making install in lib [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 91s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 91s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib" [ 91s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libembryo.la '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib' [ 91s] libtool: install: /usr/bin/install -c .libs/libembryo.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib/libembryo.so.1.7.99 [ 91s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib && { ln -s -f libembryo.so.1.7.99 libembryo.so.1 || { rm -f libembryo.so.1 && ln -s libembryo.so.1.7.99 libembryo.so.1; }; }) [ 91s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib && { ln -s -f libembryo.so.1.7.99 libembryo.so || { rm -f libembryo.so && ln -s libembryo.so.1.7.99 libembryo.so; }; }) [ 91s] libtool: install: /usr/bin/install -c .libs/libembryo.lai /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib/libembryo.la [ 91s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 91s] test -z "/usr/include/embryo-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/include/embryo-1" [ 91s] /usr/bin/install -c -m 644 Embryo.h '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/include/embryo-1' [ 91s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/lib' [ 91s] Making install in bin [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 91s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 91s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/bin" [ 91s] /bin/sh ../../libtool --mode=install /usr/bin/install -c embryo_cc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/bin' [ 91s] libtool: install: warning: `../../src/lib/libembryo.la' has not been installed in `/usr/lib' [ 91s] libtool: install: /usr/bin/install -c .libs/embryo_cc /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/bin/embryo_cc [ 91s] make[3]: Nothing to be done for `install-data-am'. [ 91s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src/bin' [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[3]: Nothing to be done for `install-exec-am'. [ 91s] make[3]: Nothing to be done for `install-data-am'. [ 91s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/src' [ 91s] Making install in include [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] make[2]: Nothing to be done for `install-exec-am'. [ 91s] test -z "/usr/share/embryo/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/share/embryo/include" [ 91s] /usr/bin/install -c -m 644 default.inc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/share/embryo/include' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/include' [ 91s] Making install in doc [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[2]: Nothing to be done for `install-exec-am'. [ 91s] make[2]: Nothing to be done for `install-data-am'. [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/doc' [ 91s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] make[2]: Nothing to be done for `install-exec-am'. [ 91s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib/pkgconfig" [ 91s] /usr/bin/install -c -m 644 embryo.pc '/home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib/pkgconfig' [ 91s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01' [ 91s] + rm -f /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/share/info/dir [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm -regex '.*\.la$' [ 91s] + xargs rm -f -- [ 91s] + find /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm -regex '.*\.a$' [ 91s] + xargs rm -f -- [ 91s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/share/license [ 91s] + cp /home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01/COPYING /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/share/license/embryo [ 91s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/embryo-1.7.1+svn.76491slp2+build01 [ 91s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/bin/embryo_cc [ 92s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm/usr/lib/libembryo.so.1.7.99 [ 92s] symlinked /usr/lib/debug/usr/lib/libembryo.so.1.7.99.debug to /usr/lib/debug/usr/lib/libembryo.so.1.debug [ 92s] symlinked /usr/lib/debug/usr/lib/libembryo.so.1.7.99.debug to /usr/lib/debug/usr/lib/libembryo.so.debug [ 92s] 1130 blocks [ 92s] + /usr/lib/rpm/check-buildroot [ 92s] + /usr/lib/rpm//brp-compress [ 92s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 92s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 92s] + /usr/lib/rpm/brp-python-bytecompile [ 92s] + /usr/lib/rpm/brp-python-hardlink [ 92s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm [ 92s] Processing files: embryo-1.7.1+svn.76491slp2+build01-1.1.armv7l [ 92s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 92s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 92s] [ 92s] Provides: embryo-bin libembryo.so.1 [ 92s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 92s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 92s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libeina.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libpthread.so.0 libpthread.so.0(GLIBC_2.4) [ 92s] Processing files: embryo-devel-1.7.1+svn.76491slp2+build01-1.1.armv7l [ 92s] Provides: pkgconfig(embryo) = 1.7.99.0 [ 92s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 92s] Requires: /usr/bin/pkg-config libembryo.so.1 [ 92s] Processing files: embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.armv7l [ 92s] Processing files: embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.armv7l [ 92s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm [ 92s] Wrote: /home/abuild/rpmbuild/SRPMS/embryo-1.7.1+svn.76491slp2+build01-1.1.src.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/embryo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/embryo-devel-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 92s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 92s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3Ph6Ys [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd embryo-1.7.1+svn.76491slp2+build01 [ 92s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/embryo-1.7.1+svn.76491slp2+build01-1.1.arm [ 92s] + exit 0 [ 92s] ... checking for files with abuild user/group [ 93s] ... creating baselibs [ 93s] ... saving built packages [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/embryo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 93s] /home/abuild/rpmbuild/RPMS/armv7l/embryo-devel-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 93s] /home/abuild/rpmbuild/SRPMS/embryo-1.7.1+svn.76491slp2+build01-1.1.src.rpm [ 93s] [ 93s] w17 finished "build embryo.spec" at Wed Jul 17 06:26:26 UTC 2013. [ 93s] [ 96s] [ 90.003061] SysRq : Power Off [ 98s] [ 91.455733] Power down. [ 98s] build: extracting built packages... [ 98s] embryo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 98s] embryo-debuginfo-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 98s] embryo-debugsource-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 98s] embryo-devel-1.7.1+svn.76491slp2+build01-1.1.armv7l.rpm [ 98s] embryo-1.7.1+svn.76491slp2+build01-1.1.src.rpm