[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w12 started "build libXdamage.spec" at Wed Jul 17 06:17:08 UTC 2013. [ 0s] [ 0s] Building libXdamage for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '4a2b34988488beaf8daeaba25ecf9d51' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/libXdamage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/libXdamage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/libXdamage.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 2s] [17/56] preinstalling readline... [ 2s] [18/56] preinstalling sed... [ 2s] [19/56] preinstalling sqlite... [ 2s] [20/56] preinstalling xz-libs... [ 2s] [21/56] preinstalling zlib... [ 2s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 3s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 3s] [40/56] preinstalling libacl-x86-arm... [ 3s] [41/56] preinstalling libattr-x86-arm... [ 3s] [42/56] preinstalling libcap-x86-arm... [ 3s] [43/56] preinstalling libfile-x86-arm... [ 3s] [44/56] preinstalling libgcc-x86-arm... [ 3s] [45/56] preinstalling liblua-x86-arm... [ 3s] [46/56] preinstalling ncurses-libs-x86-arm... [ 3s] [47/56] preinstalling nspr-x86-arm... [ 3s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [49/56] preinstalling nss-x86-arm... [ 3s] [50/56] preinstalling popt-x86-arm... [ 3s] [51/56] preinstalling rpm-libs-x86-arm... [ 3s] [52/56] preinstalling sqlite-x86-arm... [ 3s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=unsafe -drive file=/srv/build/root_7/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_7/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 6s]  SeaBIOS (version 1.6.3-20120905_140109) [ 6s] [ 6s] Booting from ROM... [ 8s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] udevd[205]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 9s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 6827/2097152 files, 251052/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] [ 2.684208] EXT4-fs (vda): Cannot change data mode on remount [ 10s] mount: / not mounted or bad option [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] *********************************** [ 10s] VM_TYPE: kvm script: /.build/build [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/libXdamage.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/libXdamage.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] /bin/rpm [ 11s] /usr/bin/rpm2cpio [ 11s] /usr/bin/rpmdb [ 11s] /usr/bin/rpmquery [ 11s] /usr/bin/rpmsign [ 11s] /usr/bin/rpmverify [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 16s] [1/159] installing kernel-headers-3.0.15-1.1 [ 16s] [2/159] installing libX11-common-1.5.0-3.1 [ 16s] [3/159] installing tizen-release-2.2.0-1.1 [ 16s] [4/159] installing tzdata-2011h-1.1 [ 17s] [5/159] installing libgcc-4.5.3-1.2 [ 17s] [6/159] installing setup-0.1-1.1 [ 17s] [7/159] installing filesystem-0.1-1.1 [ 17s] warning: group lock does not exist - using root [ 17s] warning: group mail does not exist - using root [ 17s] [8/159] installing eglibc-2.13-1.9 [ 18s] [9/159] installing libstdc++-4.5.3-1.2 [ 18s] [10/159] installing eglibc-common-2.13-1.9 [ 19s] /var/tmp/rpm-tmp.ruqofO: line 2: /usr/bin/xargs: No such file or directory [ 19s] [11/159] installing libstdc++-devel-4.5.3-1.2 [ 19s] [12/159] installing bash-4.1-3.1 [ 19s] [13/159] installing bzip2-libs-1.0.5-4.1 [ 20s] [14/159] installing cpio-2.8-3.1 [ 20s] [15/159] installing diffutils-3.0-3.1 [ 20s] [16/159] installing e2fsprogs-libs-1.41.9-2.6 [ 20s] [17/159] installing elfutils-libelf-0.152-1.7 [ 20s] [18/159] installing fdupes-1.40-42.1 [ 20s] [19/159] installing findutils-4.2.31-1.1 [ 20s] [20/159] installing gdbm-1.8.3-1.1 [ 20s] [21/159] installing libXau-1.0.7-1.1 [ 20s] [22/159] installing libattr-2.4.44-7.2 [ 20s] [23/159] installing libgomp-4.5.3-1.2 [ 20s] [24/159] installing libidn-1.15-6.1 [ 21s] [25/159] installing liblua-5.1.4-6.1 [ 21s] [26/159] installing libuuid-2.20.2-6.1 [ 21s] [27/159] installing lzo-2.03-1.1 [ 21s] [28/159] installing m4-1.4.14-1.1 [ 21s] [29/159] installing make-3.81-1.1 [ 21s] [30/159] installing net-tools-1.60-87.4 [ 21s] [31/159] installing nspr-4.8.7-1.6 [ 21s] [32/159] installing nss-softokn-freebl-3.12.9-3.10 [ 21s] [33/159] installing patch-2.6.1.169-1.1 [ 21s] [34/159] installing pkgconfig-0.25-2.1 [ 21s] [35/159] installing popt-1.16-3.1 [ 21s] [36/159] installing readline-5.2-13.1 [ 22s] [37/159] installing sed-4.1.5-2.1 [ 22s] [38/159] installing sqlite-3.7.13-1.1 [ 22s] [39/159] installing xz-libs-5.0.3-1.1 [ 22s] [40/159] installing zlib-1.2.5-2.5 [ 24s] [41/159] installing gmp-5.0.1-1.1 [ 24s] [42/159] installing libpcre-7.7-3.1 [ 24s] [43/159] installing ncurses-libs-5.7-4.1 [ 24s] [44/159] installing build-compare-2009.10.14-26.5 [ 24s] [45/159] installing libpthread-stubs-0.3-2.1 [ 24s] [46/159] installing qemu.x86_64-1.2-1.1 [ 25s] [47/159] installing xorg-x11-proto-core-7.0.25-2.1 [ 25s] [48/159] installing xorg-x11-proto-damage-1.2.1-2.1 [ 25s] [49/159] installing xorg-x11-proto-kb-1.0.6-2.1 [ 25s] [50/159] installing xorg-x11-proto-xext-7.2.1-2.1 [ 26s] [51/159] installing xorg-x11-xutils-dev-7.7-1.1 [ 26s] [52/159] installing eglibc-headers-2.13-1.9 [ 26s] [53/159] installing libcap-2.21-1.1 [ 26s] [54/159] installing unzip-6.0-9.3 [ 26s] [55/159] installing zlib-devel-1.2.5-2.5 [ 26s] [56/159] installing c-ares-1.7.4-2.1 [ 26s] [57/159] installing grep-2.5.1a-62.1 [ 26s] [58/159] installing libacl-2.2.49-2.1 [ 26s] [59/159] installing libfile-5.04-1.1 [ 27s] [60/159] installing libxcb-1.8.1-1.1 [ 27s] [61/159] installing lzo-minilzo-2.03-1.1 [ 27s] [62/159] installing mpfr-3.0.0-1.1 [ 27s] [63/159] installing ncurses-5.7-4.1 [ 27s] [64/159] installing binutils-2.22-1.1 [ 27s] [65/159] installing bzip2-1.0.5-4.1 [ 27s] [66/159] installing libblkid-2.20.2-6.1 [ 27s] [67/159] installing xz-5.0.3-1.1 [ 27s] [68/159] installing elfutils-libs-0.152-1.7 [ 27s] [69/159] installing nss-3.12.9-3.10 [ 28s] [70/159] installing perl-5.12.1-61.6 [ 28s] [71/159] installing ncurses-base-5.7-4.1 [ 29s] [72/159] installing perl-HTML-Tagset-3.20-8.1 [ 29s] [73/159] installing perl-IO-Compress-Base-2.008-61.6 [ 29s] [74/159] installing perl-Module-Pluggable-3.60-61.6 [ 29s] [75/159] installing perl-Pod-Escapes-1.04-61.6 [ 29s] [76/159] installing perl-TimeDate-1.20-1.1 [ 29s] [77/159] installing eglibc-devel-2.13-1.9 [ 29s] [78/159] installing xorg-x11-proto-fixes-5.0-2.1 [ 29s] [79/159] installing libXau-devel-1.0.7-1.1 [ 29s] [80/159] installing lzo-devel-2.03-1.1 [ 29s] [81/159] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 29s] [82/159] installing perl-devel-5.12.1-61.6 [ 29s] [83/159] installing perl-libs-5.12.1-61.6 [ 30s] [84/159] installing tar-1.17-4.1 [ 30s] [85/159] installing coreutils-6.9-9.1 [ 30s] [86/159] installing file-5.04-1.1 [ 30s] [87/159] installing libX11-1.5.0-3.1 [ 30s] [88/159] installing libmount-2.20.2-6.1 [ 30s] [89/159] installing mpc-0.9-1.1 [ 30s] [90/159] installing openssl-1.0.1c-1.11 [ 30s] [91/159] installing xz-lzma-compat-5.0.3-1.1 [ 30s] [92/159] installing elfutils-0.152-1.7 [ 31s] [93/159] installing nss-sysinit-3.12.9-3.10 [ 31s] [94/159] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 31s] [95/159] installing perl-Pod-Simple-3.07-61.6 [ 31s] [96/159] installing perl-Test-Simple-0.80-61.6 [ 31s] [97/159] installing tizen-accelerator-1.0.1-1.1 [ 31s] [98/159] installing libXfixes-5.0-2.1 [ 31s] [99/159] installing perl-IO-Compress-Zlib-2.008-61.6 [ 31s] [100/159] installing perl-Test-Harness-3.12-61.6 [ 32s] [101/159] installing gawk-3.1.5-1.1 [ 32s] [102/159] installing gzip-1.3.14-2.1 [ 32s] [103/159] installing libxcb-devel-1.8.1-1.1 [ 32s] [104/159] installing build-2011.01.10a-1.1 [ 32s] [105/159] installing libcurl-7.28.1-2.1 [ 32s] [106/159] installing cpp-4.5.3-1.2 [ 32s] [107/159] installing util-linux-2.20.2-6.1 [ 32s] warning: group tty does not exist - using root [ 32s] /bin/chown: `root:root': invalid user [ 32s] [108/159] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 32s] [109/159] installing eglibc-x86-arm-2.13-9.1 [ 33s] [110/159] installing elfutils-libelf-x86-arm-0.152-9.1 [ 33s] [111/159] installing elfutils-libs-x86-arm-0.152-9.1 [ 33s] [112/159] installing gmp-x86-arm-5.0.1-9.1 [ 33s] [113/159] installing libacl-x86-arm-2.2.49-9.1 [ 33s] [114/159] installing libattr-x86-arm-2.4.44-9.1 [ 34s] [115/159] installing libcap-x86-arm-2.21-9.1 [ 34s] [116/159] installing libfile-x86-arm-5.04-9.1 [ 39s] [117/159] installing libgcc-x86-arm-4.5.3-9.1 [ 39s] [118/159] installing liblua-x86-arm-5.1.4-9.1 [ 39s] [119/159] installing mpc-x86-arm-0.9-9.1 [ 39s] [120/159] installing mpfr-x86-arm-3.0.0-9.1 [ 40s] [121/159] installing ncurses-libs-x86-arm-5.7-9.1 [ 40s] [122/159] installing nspr-x86-arm-4.8.7-9.1 [ 40s] [123/159] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 40s] [124/159] installing nss-x86-arm-3.12.9-9.1 [ 40s] [125/159] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 40s] [126/159] installing popt-x86-arm-1.16-9.1 [ 41s] [127/159] installing sqlite-x86-arm-3.7.13-9.1 [ 41s] [128/159] installing xz-libs-x86-arm-5.0.3-9.1 [ 41s] [129/159] installing zlib-x86-arm-1.2.5-7.1 [ 41s] [130/159] installing libX11-devel-1.5.0-3.1 [ 41s] [131/159] installing curl-7.28.1-2.1 [ 41s] [132/159] installing gcc-4.5.3-1.2 [ 42s] [133/159] installing perl-CPAN-1.9205-61.6 [ 42s] [134/159] installing bash-x86-arm-4.1-7.1 [ 42s] [135/159] installing fdupes-x86-arm-1.40-9.1 [ 42s] [136/159] installing findutils-x86-arm-4.2.31-7.1 [ 42s] [137/159] installing gawk-x86-arm-3.1.5-7.1 [ 42s] [138/159] installing gzip-x86-arm-1.3.14-9.1 [ 43s] [139/159] installing make-x86-arm-3.81-8.1 [ 43s] [140/159] installing patch-x86-arm-2.6.1.169-7.1 [ 43s] [141/159] installing sed-x86-arm-4.1.5-9.1 [ 43s] /bin/sed.orig-arm already present - skipping. [ 43s] [142/159] installing diffutils-x86-arm-3.0-9.1 [ 43s] /usr/bin/cmp.orig-arm already present - skipping. [ 43s] /usr/bin/diff.orig-arm already present - skipping. [ 43s] /usr/bin/diff3.orig-arm already present - skipping. [ 43s] /usr/bin/sdiff.orig-arm already present - skipping. [ 43s] [143/159] installing libXfixes-devel-5.0-2.1 [ 43s] [144/159] installing autoconf-2.68-1.1 [ 43s] [145/159] installing coreutils-x86-arm-6.9-7.1 [ 46s] [146/159] installing file-x86-arm-5.04-7.1 [ 46s] [147/159] installing tar-x86-arm-1.17-9.1 [ 46s] /bin/tar.orig-arm already present - skipping. [ 46s] [148/159] installing elfutils-x86-arm-0.152-7.2 [ 46s] [149/159] installing gcc-c++-4.5.3-1.2 [ 47s] [150/159] installing rpm-4.9.1-4.1 [ 47s] [151/159] installing automake-1.11.1-3.1 [ 47s] [152/159] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 48s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 48s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 48s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 48s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 48s] [153/159] installing rpm-libs-4.9.1-4.1 [ 48s] [154/159] installing rpm-libs-x86-arm-4.9.1-10.1 [ 48s] [155/159] installing libtool-2.2.6b-1.1 [ 49s] [156/159] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 49s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 49s] [157/159] installing rpm-build-4.9.1-4.1 [ 49s] [158/159] installing rpm-x86-arm-4.9.1-9.1 [ 49s] /bin/rpm.orig-arm already present - skipping. [ 49s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 49s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 49s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 49s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 49s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 49s] [159/159] installing rpm-build-x86-arm-4.9.1-9.1 [ 49s] /usr/bin/rpmbuild [ 49s] /usr/lib/rpm/debugedit [ 49s] now finalizing build dir... [ 50s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 53s] build target is armv7l-tizen-linux [ 53s] ----------------------------------------------------------------- [ 53s] I have the following modifications for libXdamage.spec: [ 53s] 4c4 [ 53s] < Release: 3 [ 53s] --- [ 53s] > Release: 3.1 [ 53s] ----------------------------------------------------------------- [ 53s] ----- building libXdamage.spec (user abuild) [ 53s] ----------------------------------------------------------------- [ 53s] ----------------------------------------------------------------- [ 53s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/4a2b34988488beaf8daeaba25ecf9d51-libXdamage' /home/abuild/rpmbuild/SOURCES/libXdamage.spec [ 53s] Building target platforms: armv7l-tizen-linux [ 53s] Building for target armv7l-tizen-linux [ 53s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.dcF4kf [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + rm -rf libXdamage-1.1.3 [ 53s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libXdamage-1.1.3.tar.gz [ 53s] + /bin/tar -xf - [ 53s] + STATUS=0 [ 53s] + '[' 0 -ne 0 ']' [ 53s] + cd libXdamage-1.1.3 [ 53s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 53s] + exit 0 [ 53s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.ZTJVya [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd libXdamage-1.1.3 [ 53s] + LANG=C [ 53s] + export LANG [ 53s] + unset DISPLAY [ 53s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 53s] + export CFLAGS [ 53s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 53s] + export CXXFLAGS [ 53s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 53s] + export FFLAGS [ 53s] + LD_AS_NEEDED=1 [ 53s] + export LD_AS_NEEDED [ 53s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 53s] + export CFLAGS [ 53s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 53s] + export CXXFLAGS [ 53s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 53s] + export FFLAGS [ 53s] + autoreconf -v --install --force [ 56s] autoreconf: Entering directory `.' [ 56s] autoreconf: configure.ac: not using Gettext [ 57s] autoreconf: running: aclocal --force [ 76s] autoreconf: configure.ac: tracing [ 83s] autoreconf: running: libtoolize --copy --force [ 83s] libtoolize: putting auxiliary files in `.'. [ 83s] libtoolize: copying file `./ltmain.sh' [ 83s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 83s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 83s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 97s] autoreconf: running: /usr/bin/autoconf --force [ 109s] autoreconf: running: /usr/bin/autoheader --force [ 117s] autoreconf: running: automake --add-missing --copy --force-missing [ 121s] configure.ac:44: installing `./config.guess' [ 121s] configure.ac:44: installing `./config.sub' [ 121s] configure.ac:37: installing `./install-sh' [ 121s] configure.ac:37: installing `./missing' [ 121s] src/Makefile.am: installing `./depcomp' [ 123s] autoreconf: Leaving directory `.' [ 123s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 123s] checking for a BSD-compatible install... /usr/bin/install -c [ 124s] checking whether build environment is sane... yes [ 124s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 124s] checking for gawk... gawk [ 124s] checking whether make sets $(MAKE)... yes [ 124s] checking whether to enable maintainer-specific portions of Makefiles... no [ 124s] checking for style of include used by make... GNU [ 124s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 124s] checking for gcc... gcc [ 124s] checking whether the C compiler works... yes [ 124s] checking for C compiler default output file name... a.out [ 124s] checking for suffix of executables... [ 124s] checking whether we are cross compiling... no [ 124s] checking for suffix of object files... o [ 124s] checking whether we are using the GNU C compiler... yes [ 124s] checking whether gcc accepts -g... yes [ 124s] checking for gcc option to accept ISO C89... none needed [ 124s] checking dependency style of gcc... gcc3 [ 124s] checking for gcc option to accept ISO C99... -std=gnu99 [ 124s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 124s] checking for grep that handles long lines and -e... /bin/grep [ 124s] checking for egrep... /bin/grep -E [ 125s] checking for ANSI C header files... yes [ 125s] checking for sys/types.h... yes [ 125s] checking for sys/stat.h... yes [ 125s] checking for stdlib.h... yes [ 125s] checking for string.h... yes [ 125s] checking for memory.h... yes [ 125s] checking for strings.h... yes [ 125s] checking for inttypes.h... yes [ 125s] checking for stdint.h... yes [ 125s] checking for unistd.h... yes [ 125s] checking whether __clang__ is declared... no [ 125s] checking whether __INTEL_COMPILER is declared... no [ 125s] checking whether __SUNPRO_C is declared... no [ 125s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 125s] checking for pkg-config... /usr/bin/pkg-config [ 125s] checking pkg-config is at least version 0.9.0... yes [ 125s] checking build system type... armv7l-unknown-linux-gnueabi [ 125s] checking host system type... armv7l-unknown-linux-gnueabi [ 125s] checking for a sed that does not truncate output... /bin/sed [ 125s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 125s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 125s] checking if gcc -std=gnu99 supports-Wall... yes [ 125s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 125s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 125s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 125s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 125s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 125s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 125s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 126s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 126s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 126s] checking if gcc -std=gnu99 supports-Wunused... yes [ 126s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 126s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 126s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 126s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 126s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 126s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 126s] checking if gcc -std=gnu99 supports-pedantic... yes [ 126s] checking if gcc -std=gnu99 supports-Werror... yes [ 126s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 126s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc -std=gnu99 [ 126s] checking whether we are using the GNU C compiler... (cached) yes [ 126s] checking whether gcc -std=gnu99 accepts -g... (cached) yes [ 126s] checking for gcc -std=gnu99 option to accept ISO C89... (cached) none needed [ 126s] checking dependency style of gcc -std=gnu99... (cached) gcc3 [ 126s] checking for a sed that does not truncate output... (cached) /bin/sed [ 126s] checking for fgrep... /bin/grep -F [ 126s] checking for ld used by gcc -std=gnu99... /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld [ 126s] checking if the linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) is GNU ld... yes [ 126s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 127s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 127s] checking whether ln -s works... yes [ 127s] checking the maximum length of command line arguments... 1572864 [ 127s] checking whether the shell understands some XSI constructs... yes [ 127s] checking whether the shell understands "+="... yes [ 127s] checking for /usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld option to reload object files... -r [ 127s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 127s] checking for objdump... objdump [ 127s] checking how to recognize dependent libraries... pass_all [ 127s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 127s] checking for ar... ar [ 127s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 127s] checking for strip... strip [ 127s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 127s] checking for ranlib... ranlib [ 127s] checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok [ 127s] checking for dlfcn.h... yes [ 127s] checking for objdir... .libs [ 127s] checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no [ 127s] checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC [ 127s] checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes [ 127s] checking if gcc -std=gnu99 static flag -static works... no [ 127s] checking if gcc -std=gnu99 supports -c -o file.o... yes [ 127s] checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes [ 127s] checking whether the gcc -std=gnu99 linker (/usr/libexec/gcc/armv7l-tizen-linux-gnueabi/4.5.3/ld) supports shared libraries... yes [ 127s] checking whether -lc should be explicitly linked in... no [ 127s] checking dynamic linker characteristics... GNU/Linux ld.so [ 127s] checking how to hardcode library paths into programs... immediate [ 127s] checking whether stripping libraries is possible... yes [ 127s] checking if libtool supports shared libraries... yes [ 127s] checking whether to build shared libraries... yes [ 127s] checking whether to build static libraries... no [ 127s] checking for XDAMAGE... yes [ 127s] configure: creating ./config.status [ 128s] config.status: creating Makefile [ 128s] config.status: creating src/Makefile [ 128s] config.status: creating xdamage.pc [ 128s] config.status: creating config.h [ 128s] config.status: executing depfiles commands [ 128s] config.status: executing libtool commands [ 128s] + make -j4 [ 128s] make all-recursive [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] Making all in src [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] CC Xdamage.lo [ 128s] CCLD libXdamage.la [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] + exit 0 [ 128s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.DegIMG [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd libXdamage-1.1.3 [ 128s] + LANG=C [ 128s] + export LANG [ 128s] + unset DISPLAY [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/license [ 128s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/license/libXdamage [ 128s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm 'INSTALL=install -p' [ 128s] Making install in src [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib" [ 128s] /bin/sh ../libtool --mode=install install -p libXdamage.la '/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib' [ 128s] libtool: install: install -p .libs/libXdamage.so.1.1.0 /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/libXdamage.so.1.1.0 [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib && { ln -s -f libXdamage.so.1.1.0 libXdamage.so.1 || { rm -f libXdamage.so.1 && ln -s libXdamage.so.1.1.0 libXdamage.so.1; }; }) [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib && { ln -s -f libXdamage.so.1.1.0 libXdamage.so || { rm -f libXdamage.so && ln -s libXdamage.so.1.1.0 libXdamage.so; }; }) [ 128s] libtool: install: install -p .libs/libXdamage.lai /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/libXdamage.la [ 128s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 128s] test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/include/X11/extensions" [ 128s] install -p -m 644 ../include/X11/extensions/Xdamage.h '/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/include/X11/extensions' [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3/src' [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] make[2]: Nothing to be done for `install-exec-am'. [ 128s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/pkgconfig" [ 128s] install -p -m 644 xdamage.pc '/home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/pkgconfig' [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXdamage-1.1.3' [ 128s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/libXdamage.la [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/info [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/doc [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/doc/libXdamage [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/gtk-doc [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/share/man [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 128s] + xargs rm -f -- [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 128s] + xargs rm -f -- [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 128s] + xargs rm -f -- [ 128s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libXdamage-1.1.3 [ 128s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm/usr/lib/libXdamage.so.1.1.0 [ 129s] symlinked /usr/lib/debug/usr/lib/libXdamage.so.1.1.0.debug to /usr/lib/debug/usr/lib/libXdamage.so.debug [ 129s] symlinked /usr/lib/debug/usr/lib/libXdamage.so.1.1.0.debug to /usr/lib/debug/usr/lib/libXdamage.so.1.debug [ 129s] 31 blocks [ 129s] + /usr/lib/rpm/check-buildroot [ 129s] + /usr/lib/rpm//brp-compress [ 129s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 129s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 129s] + /usr/lib/rpm/brp-python-bytecompile [ 129s] + /usr/lib/rpm/brp-python-hardlink [ 129s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 129s] Processing files: libXdamage-1.1.3-3.1.armv7l [ 129s] Provides: libXdamage.so.1 [ 129s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires(post): /sbin/ldconfig [ 129s] Requires(postun): /sbin/ldconfig [ 129s] Requires: libX11.so.6 libXfixes.so.3 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 129s] Processing files: libXdamage-devel-1.1.3-3.1.armv7l [ 129s] Provides: libxdamage-devel pkgconfig(xdamage) = 1.1.3 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: /usr/bin/pkg-config libXdamage.so.1 pkgconfig(damageproto) >= 1.1 pkgconfig(x11) pkgconfig(xfixes) pkgconfig(xproto) [ 129s] Processing files: libXdamage-debuginfo-1.1.3-3.1.armv7l [ 129s] Processing files: libXdamage-debugsource-1.1.3-3.1.armv7l [ 129s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 129s] Wrote: /home/abuild/rpmbuild/SRPMS/libXdamage-1.1.3-3.1.src.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-1.1.3-3.1.armv7l.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-devel-1.1.3-3.1.armv7l.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-debuginfo-1.1.3-3.1.armv7l.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-debugsource-1.1.3-3.1.armv7l.rpm [ 129s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Z1q8s6 [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd libXdamage-1.1.3 [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXdamage-1.1.3-3.1.arm [ 129s] + exit 0 [ 129s] ... checking for files with abuild user/group [ 129s] ... creating baselibs [ 130s] ... saving built packages [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-1.1.3-3.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-debuginfo-1.1.3-3.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-debugsource-1.1.3-3.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libXdamage-devel-1.1.3-3.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/SRPMS/libXdamage-1.1.3-3.1.src.rpm [ 130s] [ 130s] w12 finished "build libXdamage.spec" at Wed Jul 17 06:19:17 UTC 2013. [ 130s] [ 133s] [ 125.843853] SysRq : Power Off [ 135s] [ 127.309550] Power down. [ 135s] build: extracting built packages... [ 135s] libXdamage-1.1.3-3.1.armv7l.rpm [ 135s] libXdamage-debuginfo-1.1.3-3.1.armv7l.rpm [ 135s] libXdamage-debugsource-1.1.3-3.1.armv7l.rpm [ 135s] libXdamage-devel-1.1.3-3.1.armv7l.rpm [ 135s] libXdamage-1.1.3-3.1.src.rpm