[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7el [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w14 started "build xorg-x11-proto-xf86dga.spec" at Wed Jul 17 05:55:43 UTC 2013. [ 0s] [ 0s] Building xorg-x11-proto-xf86dga for project 'Tizen:2.2:Main' repository 'standard' arch 'armv7el' srcmd5 '1bd66760756527c0540693b13d9cf000' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/xorg-x11-proto-xf86dga.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/xorg-x11-proto-xf86dga.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/xorg-x11-proto-xf86dga.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm -> rpm-libs [ 1s] [1/56] preinstalling libgcc... [ 1s] [2/56] preinstalling setup... [ 1s] [3/56] preinstalling filesystem... [ 1s] [4/56] preinstalling eglibc... [ 1s] [5/56] preinstalling eglibc-common... [ 1s] [6/56] preinstalling bash... [ 1s] [7/56] preinstalling bzip2-libs... [ 1s] [8/56] preinstalling diffutils... [ 1s] [9/56] preinstalling elfutils-libelf... [ 1s] [10/56] preinstalling libattr... [ 1s] [11/56] preinstalling liblua... [ 1s] [12/56] preinstalling libstdc++... [ 1s] [13/56] preinstalling ncurses-libs... [ 1s] [14/56] preinstalling nspr... [ 1s] [15/56] preinstalling nss-softokn-freebl... [ 1s] [16/56] preinstalling popt... [ 1s] [17/56] preinstalling readline... [ 1s] [18/56] preinstalling sed... [ 1s] [19/56] preinstalling sqlite... [ 1s] [20/56] preinstalling xz-libs... [ 1s] [21/56] preinstalling zlib... [ 1s] [22/56] preinstalling qemu.x86_64... [ 2s] [23/56] preinstalling libcap... [ 2s] [24/56] preinstalling libacl... [ 2s] [25/56] preinstalling libfile... [ 2s] [26/56] preinstalling bzip2... [ 2s] [27/56] preinstalling nss... [ 2s] [28/56] preinstalling tar... [ 2s] [29/56] preinstalling coreutils... [ 2s] [30/56] preinstalling file... [ 2s] [31/56] preinstalling rpm... [ 2s] [32/56] preinstalling tizen-accelerator... [ 2s] [33/56] preinstalling rpm-libs... [ 2s] [34/56] preinstalling gmp-x86-arm... [ 2s] [35/56] preinstalling mpc-x86-arm... [ 2s] [36/56] preinstalling mpfr-x86-arm... [ 2s] [37/56] preinstalling bzip2-libs-x86-arm... [ 2s] [38/56] preinstalling eglibc-x86-arm... [ 2s] [39/56] preinstalling elfutils-libelf-x86-arm... [ 2s] [40/56] preinstalling libacl-x86-arm... [ 2s] [41/56] preinstalling libattr-x86-arm... [ 2s] [42/56] preinstalling libcap-x86-arm... [ 2s] [43/56] preinstalling libfile-x86-arm... [ 2s] [44/56] preinstalling libgcc-x86-arm... [ 2s] [45/56] preinstalling liblua-x86-arm... [ 2s] [46/56] preinstalling ncurses-libs-x86-arm... [ 2s] [47/56] preinstalling nspr-x86-arm... [ 2s] [48/56] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [49/56] preinstalling nss-x86-arm... [ 2s] [50/56] preinstalling popt-x86-arm... [ 2s] [51/56] preinstalling rpm-libs-x86-arm... [ 2s] [52/56] preinstalling sqlite-x86-arm... [ 2s] [53/56] preinstalling xz-libs-x86-arm... [ 3s] [54/56] preinstalling zlib-x86-arm... [ 3s] [55/56] preinstalling bash-x86-arm... [ 3s] [56/56] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm -> rpm-libs [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -net none -cpu host -kernel /srv/kernel/vmlinuz -initrd /srv/kernel/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=unsafe -drive file=/srv/build/root_8/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_8/swap,if=virtio,cache=unsafe -smp 4 [ 5s]  [ 5s] Google, Inc. [ 5s] Serial Graphics Adapter 09/05/12 [ 5s] SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $ (abuild@build24) Wed Sep 5 14:01:11 UTC 2012 [ 5s] 4 0 [ 5s]  SeaBIOS (version 1.6.3-20120905_140109) [ 5s] [ 5s] Booting from ROM... [ 8s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] udevd[215]: failed to execute '/etc/sysconfig/network/scripts/ifup-sysctl' '/etc/sysconfig/network/scripts/ifup-sysctl lo -o hotplug': No such file or directory [ 9s] [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.20.1 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 6797/2097152 files, 250665/8388608 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw,noatime,acl,user_xattr -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] [ 3.582003] EXT4-fs (vda): Cannot change data mode on remount [ 10s] mount: / not mounted or bad option [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] *********************************** [ 11s] VM_TYPE: kvm script: /.build/build [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/xorg-x11-proto-xf86dga.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/xorg-x11-proto-xf86dga.spec build rpmlint-Factory ... [ 21s] running rpm-x86-arm postinstall script [ 21s] /bin/rpm [ 21s] /usr/bin/rpm2cpio [ 21s] /usr/bin/rpmdb [ 21s] /usr/bin/rpmquery [ 21s] /usr/bin/rpmsign [ 21s] /usr/bin/rpmverify [ 21s] running rpm-libs-x86-arm postinstall script [ 21s] running tizen-accelerator postinstall script [ 22s] running bash-x86-arm postinstall script [ 22s] initializing rpm db... [ 26s] [1/144] installing kernel-headers-3.0.15-1.1 [ 26s] [2/144] installing tizen-release-2.2.0-1.1 [ 26s] [3/144] installing tzdata-2011h-1.1 [ 26s] [4/144] installing libgcc-4.5.3-1.2 [ 26s] [5/144] installing setup-0.1-1.1 [ 26s] [6/144] installing filesystem-0.1-1.1 [ 27s] warning: group lock does not exist - using root [ 27s] warning: group mail does not exist - using root [ 27s] [7/144] installing eglibc-2.13-1.9 [ 27s] [8/144] installing libstdc++-4.5.3-1.2 [ 27s] [9/144] installing eglibc-common-2.13-1.9 [ 29s] /var/tmp/rpm-tmp.FwjBG7: line 2: /usr/bin/xargs: No such file or directory [ 29s] [10/144] installing libstdc++-devel-4.5.3-1.2 [ 30s] [11/144] installing bash-4.1-3.1 [ 30s] [12/144] installing bzip2-libs-1.0.5-4.1 [ 30s] [13/144] installing cpio-2.8-3.1 [ 30s] [14/144] installing diffutils-3.0-3.1 [ 30s] [15/144] installing e2fsprogs-libs-1.41.9-2.6 [ 30s] [16/144] installing elfutils-libelf-0.152-1.7 [ 30s] [17/144] installing fdupes-1.40-42.1 [ 30s] [18/144] installing findutils-4.2.31-1.1 [ 30s] [19/144] installing gdbm-1.8.3-1.1 [ 30s] [20/144] installing libattr-2.4.44-7.2 [ 31s] [21/144] installing libgomp-4.5.3-1.2 [ 31s] [22/144] installing libidn-1.15-6.1 [ 31s] [23/144] installing liblua-5.1.4-6.1 [ 31s] [24/144] installing libuuid-2.20.2-6.1 [ 31s] [25/144] installing lzo-2.03-1.1 [ 31s] [26/144] installing m4-1.4.14-1.1 [ 31s] [27/144] installing make-3.81-1.1 [ 31s] [28/144] installing net-tools-1.60-87.4 [ 31s] [29/144] installing nspr-4.8.7-1.6 [ 31s] [30/144] installing nss-softokn-freebl-3.12.9-3.10 [ 31s] [31/144] installing patch-2.6.1.169-1.1 [ 31s] [32/144] installing pkgconfig-0.25-2.1 [ 32s] [33/144] installing popt-1.16-3.1 [ 32s] [34/144] installing readline-5.2-13.1 [ 32s] [35/144] installing sed-4.1.5-2.1 [ 32s] [36/144] installing sqlite-3.7.13-1.1 [ 32s] [37/144] installing xz-libs-5.0.3-1.1 [ 32s] [38/144] installing zlib-1.2.5-2.5 [ 32s] [39/144] installing gmp-5.0.1-1.1 [ 32s] [40/144] installing libpcre-7.7-3.1 [ 32s] [41/144] installing ncurses-libs-5.7-4.1 [ 33s] [42/144] installing build-compare-2009.10.14-26.5 [ 33s] [43/144] installing qemu.x86_64-1.2-1.1 [ 34s] [44/144] installing xorg-x11-xutils-dev-7.7-1.1 [ 34s] [45/144] installing eglibc-headers-2.13-1.9 [ 34s] [46/144] installing libcap-2.21-1.1 [ 34s] [47/144] installing unzip-6.0-9.3 [ 34s] [48/144] installing zlib-devel-1.2.5-2.5 [ 34s] [49/144] installing c-ares-1.7.4-2.1 [ 34s] [50/144] installing grep-2.5.1a-62.1 [ 35s] [51/144] installing libacl-2.2.49-2.1 [ 35s] [52/144] installing libfile-5.04-1.1 [ 35s] [53/144] installing lzo-minilzo-2.03-1.1 [ 35s] [54/144] installing mpfr-3.0.0-1.1 [ 35s] [55/144] installing ncurses-5.7-4.1 [ 35s] [56/144] installing binutils-2.22-1.1 [ 35s] [57/144] installing bzip2-1.0.5-4.1 [ 35s] [58/144] installing libblkid-2.20.2-6.1 [ 36s] [59/144] installing xz-5.0.3-1.1 [ 36s] [60/144] installing elfutils-libs-0.152-1.7 [ 36s] [61/144] installing nss-3.12.9-3.10 [ 36s] [62/144] installing perl-5.12.1-61.6 [ 37s] [63/144] installing ncurses-base-5.7-4.1 [ 37s] [64/144] installing perl-HTML-Tagset-3.20-8.1 [ 37s] [65/144] installing perl-IO-Compress-Base-2.008-61.6 [ 37s] [66/144] installing perl-Module-Pluggable-3.60-61.6 [ 37s] [67/144] installing perl-Pod-Escapes-1.04-61.6 [ 37s] [68/144] installing perl-TimeDate-1.20-1.1 [ 37s] [69/144] installing eglibc-devel-2.13-1.9 [ 37s] [70/144] installing lzo-devel-2.03-1.1 [ 37s] [71/144] installing perl-Compress-Raw-Zlib-2.008-61.6 [ 38s] [72/144] installing perl-devel-5.12.1-61.6 [ 38s] [73/144] installing perl-libs-5.12.1-61.6 [ 38s] [74/144] installing tar-1.17-4.1 [ 38s] [75/144] installing coreutils-6.9-9.1 [ 38s] [76/144] installing file-5.04-1.1 [ 38s] [77/144] installing libmount-2.20.2-6.1 [ 38s] [78/144] installing mpc-0.9-1.1 [ 38s] [79/144] installing openssl-1.0.1c-1.11 [ 38s] [80/144] installing xz-lzma-compat-5.0.3-1.1 [ 38s] [81/144] installing elfutils-0.152-1.7 [ 39s] [82/144] installing nss-sysinit-3.12.9-3.10 [ 39s] [83/144] installing perl-ExtUtils-ParseXS-2.18-61.6 [ 39s] [84/144] installing perl-Pod-Simple-3.07-61.6 [ 39s] [85/144] installing perl-Test-Simple-0.80-61.6 [ 39s] [86/144] installing tizen-accelerator-1.0.1-1.1 [ 39s] [87/144] installing perl-IO-Compress-Zlib-2.008-61.6 [ 39s] [88/144] installing perl-Test-Harness-3.12-61.6 [ 40s] [89/144] installing gawk-3.1.5-1.1 [ 40s] [90/144] installing gzip-1.3.14-2.1 [ 40s] [91/144] installing build-2011.01.10a-1.1 [ 40s] [92/144] installing libcurl-7.28.1-2.1 [ 40s] [93/144] installing cpp-4.5.3-1.2 [ 40s] [94/144] installing util-linux-2.20.2-6.1 [ 40s] warning: group tty does not exist - using root [ 40s] /bin/chown: `root:root': invalid user [ 40s] [95/144] installing bzip2-libs-x86-arm-1.0.5-9.1 [ 41s] [96/144] installing eglibc-x86-arm-2.13-9.1 [ 41s] [97/144] installing elfutils-libelf-x86-arm-0.152-9.1 [ 41s] [98/144] installing elfutils-libs-x86-arm-0.152-9.1 [ 41s] [99/144] installing gmp-x86-arm-5.0.1-9.1 [ 43s] [100/144] installing libacl-x86-arm-2.2.49-9.1 [ 43s] [101/144] installing libattr-x86-arm-2.4.44-9.1 [ 44s] [102/144] installing libcap-x86-arm-2.21-9.1 [ 44s] [103/144] installing libfile-x86-arm-5.04-9.1 [ 44s] [104/144] installing libgcc-x86-arm-4.5.3-9.1 [ 44s] [105/144] installing liblua-x86-arm-5.1.4-9.1 [ 44s] [106/144] installing mpc-x86-arm-0.9-9.1 [ 44s] [107/144] installing mpfr-x86-arm-3.0.0-9.1 [ 45s] [108/144] installing ncurses-libs-x86-arm-5.7-9.1 [ 45s] [109/144] installing nspr-x86-arm-4.8.7-9.1 [ 45s] [110/144] installing nss-softokn-freebl-x86-arm-3.12.9-9.1 [ 59s] [111/144] installing nss-x86-arm-3.12.9-9.1 [ 59s] [112/144] installing perl-ExtUtils-MakeMaker-6.36-61.6 [ 59s] [113/144] installing popt-x86-arm-1.16-9.1 [ 59s] [114/144] installing sqlite-x86-arm-3.7.13-9.1 [ 59s] [115/144] installing xz-libs-x86-arm-5.0.3-9.1 [ 60s] [116/144] installing zlib-x86-arm-1.2.5-7.1 [ 60s] [117/144] installing curl-7.28.1-2.1 [ 60s] [118/144] installing gcc-4.5.3-1.2 [ 60s] [119/144] installing perl-CPAN-1.9205-61.6 [ 60s] [120/144] installing bash-x86-arm-4.1-7.1 [ 60s] [121/144] installing fdupes-x86-arm-1.40-9.1 [ 61s] [122/144] installing findutils-x86-arm-4.2.31-7.1 [ 61s] [123/144] installing gawk-x86-arm-3.1.5-7.1 [ 61s] [124/144] installing gzip-x86-arm-1.3.14-9.1 [ 61s] [125/144] installing make-x86-arm-3.81-8.1 [ 61s] [126/144] installing patch-x86-arm-2.6.1.169-7.1 [ 61s] [127/144] installing sed-x86-arm-4.1.5-9.1 [ 61s] /bin/sed.orig-arm already present - skipping. [ 61s] [128/144] installing diffutils-x86-arm-3.0-9.1 [ 62s] /usr/bin/cmp.orig-arm already present - skipping. [ 62s] /usr/bin/diff.orig-arm already present - skipping. [ 62s] /usr/bin/diff3.orig-arm already present - skipping. [ 62s] /usr/bin/sdiff.orig-arm already present - skipping. [ 62s] [129/144] installing autoconf-2.68-1.1 [ 62s] [130/144] installing coreutils-x86-arm-6.9-7.1 [ 64s] [131/144] installing file-x86-arm-5.04-7.1 [ 68s] [132/144] installing tar-x86-arm-1.17-9.1 [ 69s] /bin/tar.orig-arm already present - skipping. [ 69s] [133/144] installing elfutils-x86-arm-0.152-7.2 [ 69s] [134/144] installing gcc-c++-4.5.3-1.2 [ 69s] [135/144] installing rpm-4.9.1-4.1 [ 69s] [136/144] installing automake-1.11.1-3.1 [ 69s] [137/144] installing cross-armv7l-gcc-accel-armv7l-4.5.3-1.2 [ 70s] "GCCVER: 4.5.3 GCCVER_NEW: 4.5.3 " [ 70s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 70s] cp: cannot stat `/emul/ia32-linux/usr/bin/c89': No such file or directory [ 70s] cp: cannot stat `/emul/ia32-linux/usr/bin/c99': No such file or directory [ 70s] [138/144] installing rpm-libs-4.9.1-4.1 [ 70s] [139/144] installing rpm-libs-x86-arm-4.9.1-10.1 [ 70s] [140/144] installing libtool-2.2.6b-1.1 [ 70s] [141/144] installing cross-armv7l-binutils-accel-armv7l-2.22-1.1 [ 71s] mv: cannot stat `/usr/bin/gprov': No such file or directory [ 71s] [142/144] installing rpm-build-4.9.1-4.1 [ 71s] [143/144] installing rpm-x86-arm-4.9.1-9.1 [ 73s] /bin/rpm.orig-arm already present - skipping. [ 73s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 73s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 73s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 73s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 73s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 73s] [144/144] installing rpm-build-x86-arm-4.9.1-9.1 [ 74s] /usr/bin/rpmbuild [ 74s] /usr/lib/rpm/debugedit [ 74s] now finalizing build dir... [ 83s] /.build/build: line 2269: //etc/passwd: No such file or directory [ 86s] build target is armv7l-tizen-linux [ 86s] ----------------------------------------------------------------- [ 86s] I have the following modifications for xorg-x11-proto-xf86dga.spec: [ 86s] 4c4 [ 86s] < Release: 2 [ 86s] --- [ 86s] > Release: 2.1 [ 86s] ----------------------------------------------------------------- [ 86s] ----- building xorg-x11-proto-xf86dga.spec (user abuild) [ 86s] ----------------------------------------------------------------- [ 86s] ----------------------------------------------------------------- [ 86s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.2:Main/standard/1bd66760756527c0540693b13d9cf000-xorg-x11-proto-xf86dga' /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-xf86dga.spec [ 86s] Building target platforms: armv7l-tizen-linux [ 86s] Building for target armv7l-tizen-linux [ 86s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.vf4a3w [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + rm -rf xorg-x11-proto-xf86dga-2.1 [ 86s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-xf86dga-2.1.tar.gz [ 86s] + /bin/tar -xf - [ 86s] + STATUS=0 [ 86s] + '[' 0 -ne 0 ']' [ 86s] + cd xorg-x11-proto-xf86dga-2.1 [ 86s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 86s] + exit 0 [ 86s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.kYIzPx [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd xorg-x11-proto-xf86dga-2.1 [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 86s] + export CFLAGS [ 86s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 86s] + export CXXFLAGS [ 86s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 86s] + export FFLAGS [ 86s] + LD_AS_NEEDED=1 [ 86s] + export LD_AS_NEEDED [ 86s] + ./autogen.sh [ 91s] autoreconf: Entering directory `.' [ 91s] autoreconf: configure.ac: not using Gettext [ 92s] autoreconf: running: aclocal [ 102s] autoreconf: configure.ac: tracing [ 108s] autoreconf: configure.ac: not using Libtool [ 108s] autoreconf: running: /usr/bin/autoconf [ 113s] autoreconf: configure.ac: not using Autoheader [ 113s] autoreconf: running: automake --add-missing --copy --no-force [ 117s] configure.ac:9: installing `./config.guess' [ 117s] configure.ac:9: installing `./config.sub' [ 117s] configure.ac:3: installing `./install-sh' [ 117s] configure.ac:3: installing `./missing' [ 118s] autoreconf: Leaving directory `.' [ 118s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 118s] checking for a BSD-compatible install... /usr/bin/install -c [ 119s] checking whether build environment is sane... yes [ 119s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 119s] checking for gawk... gawk [ 119s] checking whether make sets $(MAKE)... yes [ 119s] checking for style of include used by make... GNU [ 119s] checking for gcc... gcc [ 119s] checking whether the C compiler works... yes [ 119s] checking for C compiler default output file name... a.out [ 119s] checking for suffix of executables... [ 119s] checking whether we are cross compiling... no [ 119s] checking for suffix of object files... o [ 119s] checking whether we are using the GNU C compiler... yes [ 119s] checking whether gcc accepts -g... yes [ 119s] checking for gcc option to accept ISO C89... none needed [ 119s] checking dependency style of gcc... none [ 119s] checking for gcc option to accept ISO C99... -std=gnu99 [ 119s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 119s] checking for grep that handles long lines and -e... /bin/grep [ 119s] checking for egrep... /bin/grep -E [ 120s] checking for ANSI C header files... yes [ 120s] checking for sys/types.h... yes [ 120s] checking for sys/stat.h... yes [ 120s] checking for stdlib.h... yes [ 120s] checking for string.h... yes [ 120s] checking for memory.h... yes [ 120s] checking for strings.h... yes [ 120s] checking for inttypes.h... yes [ 120s] checking for stdint.h... yes [ 120s] checking for unistd.h... yes [ 120s] checking whether __clang__ is declared... no [ 120s] checking whether __INTEL_COMPILER is declared... no [ 120s] checking whether __SUNPRO_C is declared... no [ 120s] checking for pkg-config... /usr/bin/pkg-config [ 120s] checking pkg-config is at least version 0.9.0... yes [ 120s] checking build system type... armv7l-unknown-linux-gnueabi [ 120s] checking host system type... armv7l-unknown-linux-gnueabi [ 120s] checking for a sed that does not truncate output... /bin/sed [ 120s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 120s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 120s] checking if gcc -std=gnu99 supports-Wall... yes [ 120s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 120s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 120s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 120s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 120s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 120s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 120s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 120s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 120s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 121s] checking if gcc -std=gnu99 supports-Wunused... yes [ 121s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 121s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 121s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 121s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 121s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 121s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 121s] checking if gcc -std=gnu99 supports-pedantic... yes [ 121s] checking if gcc -std=gnu99 supports-Werror... yes [ 121s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 121s] configure: creating ./config.status [ 121s] config.status: creating Makefile [ 121s] config.status: creating xf86dgaproto.pc [ 121s] config.status: executing depfiles commands [ 122s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 122s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 122s] + export CFLAGS [ 122s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 122s] + export CXXFLAGS [ 122s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 122s] + export FFLAGS [ 122s] + autoreconf -v --install --force [ 125s] autoreconf: Entering directory `.' [ 125s] autoreconf: configure.ac: not using Gettext [ 126s] autoreconf: running: aclocal --force [ 133s] autoreconf: configure.ac: tracing [ 138s] autoreconf: configure.ac: not using Libtool [ 138s] autoreconf: running: /usr/bin/autoconf --force [ 147s] autoreconf: configure.ac: not using Autoheader [ 147s] autoreconf: running: automake --add-missing --copy --force-missing [ 152s] autoreconf: Leaving directory `.' [ 152s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --libdir=/usr/share --without-xmlto [ 152s] configure: WARNING: unrecognized options: --disable-static, --without-xmlto [ 152s] checking for a BSD-compatible install... /usr/bin/install -c [ 153s] checking whether build environment is sane... yes [ 153s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 153s] checking for gawk... gawk [ 153s] checking whether make sets $(MAKE)... yes [ 153s] checking for style of include used by make... GNU [ 153s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 153s] checking for gcc... gcc [ 153s] checking whether the C compiler works... yes [ 153s] checking for C compiler default output file name... a.out [ 153s] checking for suffix of executables... [ 153s] checking whether we are cross compiling... no [ 153s] checking for suffix of object files... o [ 153s] checking whether we are using the GNU C compiler... yes [ 153s] checking whether gcc accepts -g... yes [ 153s] checking for gcc option to accept ISO C89... none needed [ 153s] checking dependency style of gcc... none [ 154s] checking for gcc option to accept ISO C99... -std=gnu99 [ 154s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 154s] checking for grep that handles long lines and -e... /bin/grep [ 154s] checking for egrep... /bin/grep -E [ 154s] checking for ANSI C header files... yes [ 154s] checking for sys/types.h... yes [ 154s] checking for sys/stat.h... yes [ 154s] checking for stdlib.h... yes [ 154s] checking for string.h... yes [ 154s] checking for memory.h... yes [ 154s] checking for strings.h... yes [ 154s] checking for inttypes.h... yes [ 154s] checking for stdint.h... yes [ 154s] checking for unistd.h... yes [ 154s] checking whether __clang__ is declared... no [ 154s] checking whether __INTEL_COMPILER is declared... no [ 154s] checking whether __SUNPRO_C is declared... no [ 154s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 154s] checking for pkg-config... /usr/bin/pkg-config [ 154s] checking pkg-config is at least version 0.9.0... yes [ 154s] checking build system type... armv7l-unknown-linux-gnueabi [ 154s] checking host system type... armv7l-unknown-linux-gnueabi [ 154s] checking for a sed that does not truncate output... /bin/sed [ 154s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 154s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 154s] checking if gcc -std=gnu99 supports-Wall... yes [ 154s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 154s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 154s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 155s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 155s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 155s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 155s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 155s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 155s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 155s] checking if gcc -std=gnu99 supports-Wunused... yes [ 155s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 155s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 155s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 155s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 155s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 155s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 155s] checking if gcc -std=gnu99 supports-pedantic... yes [ 155s] checking if gcc -std=gnu99 supports-Werror... yes [ 155s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 155s] configure: creating ./config.status [ 156s] config.status: creating Makefile [ 156s] config.status: creating xf86dgaproto.pc [ 156s] config.status: executing depfiles commands [ 156s] configure: WARNING: unrecognized options: --disable-static, --without-xmlto [ 156s] + make -j4 [ 156s] make: Nothing to be done for `all'. [ 156s] + exit 0 [ 156s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.7XbZTL [ 156s] + umask 022 [ 156s] + cd /home/abuild/rpmbuild/BUILD [ 156s] + cd xorg-x11-proto-xf86dga-2.1 [ 156s] + LANG=C [ 156s] + export LANG [ 156s] + unset DISPLAY [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm install [ 156s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-xf86dga-2.1' [ 156s] make[1]: Nothing to be done for `install-exec-am'. [ 156s] test -z "/usr/share/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/pkgconfig" [ 156s] /usr/bin/install -c -m 644 xf86dgaproto.pc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/pkgconfig' [ 156s] test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/include/X11/extensions" [ 156s] /usr/bin/install -c -m 644 xf86dga.h xf86dga1const.h xf86dga1str.h xf86dga1proto.h xf86dgaconst.h xf86dgaproto.h xf86dgastr.h '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/include/X11/extensions' [ 156s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-xf86dga-2.1' [ 156s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/info/dir [ 156s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm -regex '.*\.la$' [ 156s] + xargs rm -f -- [ 156s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm -regex '.*\.a$' [ 156s] + xargs rm -f -- [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/info [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/doc [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/doc/xorg-x11-proto-xf86dga [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/gtk-doc [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm/usr/share/man [ 156s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm -regex '.*/man/man./.*.[0-9]' [ 156s] + xargs rm -f -- [ 156s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm -regex '.*/man/../man./.*.[0-9]' [ 156s] + xargs rm -f -- [ 156s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 156s] + xargs rm -f -- [ 156s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-proto-xf86dga-2.1 [ 156s] + /usr/lib/rpm/check-buildroot [ 156s] + /usr/lib/rpm//brp-compress [ 156s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 156s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 156s] + /usr/lib/rpm/brp-python-bytecompile [ 156s] + /usr/lib/rpm/brp-python-hardlink [ 156s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] Processing files: xorg-x11-proto-xf86dga-2.1-2.1.armv7l [ 156s] Provides: pkgconfig(xf86dgaproto) = 2.1 xf86dgaproto [ 156s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 156s] Requires: /usr/bin/pkg-config [ 156s] Processing files: xorg-x11-proto-xf86dga-debuginfo-2.1-2.1.armv7l [ 156s] Processing files: xorg-x11-proto-xf86dga-debugsource-2.1-2.1.armv7l [ 156s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-proto-xf86dga-2.1-2.1.src.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-2.1-2.1.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-debuginfo-2.1-2.1.armv7l.rpm [ 156s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-debugsource-2.1-2.1.armv7l.rpm [ 156s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wqVLd2 [ 156s] + umask 022 [ 156s] + cd /home/abuild/rpmbuild/BUILD [ 156s] + cd xorg-x11-proto-xf86dga-2.1 [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-xf86dga-2.1-2.1.arm [ 156s] + exit 0 [ 156s] ... checking for files with abuild user/group [ 156s] ... creating baselibs [ 157s] ... saving built packages [ 157s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-2.1-2.1.armv7l.rpm [ 157s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-debuginfo-2.1-2.1.armv7l.rpm [ 157s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-xf86dga-debugsource-2.1-2.1.armv7l.rpm [ 157s] /home/abuild/rpmbuild/SRPMS/xorg-x11-proto-xf86dga-2.1-2.1.src.rpm [ 157s] [ 157s] w14 finished "build xorg-x11-proto-xf86dga.spec" at Wed Jul 17 05:58:19 UTC 2013. [ 157s] [ 160s] [ 153.590970] SysRq : Power Off [ 162s] [ 155.178959] Power down. [ 163s] build: extracting built packages... [ 163s] xorg-x11-proto-xf86dga-2.1-2.1.armv7l.rpm [ 163s] xorg-x11-proto-xf86dga-debuginfo-2.1-2.1.armv7l.rpm [ 163s] xorg-x11-proto-xf86dga-debugsource-2.1-2.1.armv7l.rpm [ 163s] xorg-x11-proto-xf86dga-2.1-2.1.src.rpm