[ 0s] Using BUILD_ROOT=/srv/build/root_9/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_9/root [ 0s] [ 0s] [ 0s] w11 started "build _service:gbs:xcb-proto.spec" at Thu Apr 14 09:19:22 UTC 2016. [ 0s] [ 0s] Building xcb-proto for project 'Tizen:2.3.1:Mobile' repository 'target' arch 'armv7l' srcmd5 'd238bfcad45b99dac1d79bf0b6cb8a05' [ 0s] [ 0s] processing specfile /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/9/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_9/.build.rpmlist /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 0s] [9/57] preinstalling diffutils... [ 0s] [10/57] preinstalling elfutils-libelf... [ 0s] [11/57] preinstalling libattr... [ 0s] [12/57] preinstalling liblua... [ 0s] [13/57] preinstalling libstdc++... [ 0s] [14/57] preinstalling ncurses-libs... [ 0s] [15/57] preinstalling nspr... [ 0s] [16/57] preinstalling nss-softokn-freebl... [ 0s] [17/57] preinstalling popt... [ 0s] [18/57] preinstalling readline... [ 0s] [19/57] preinstalling sed... [ 0s] [20/57] preinstalling sqlite... [ 0s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 1s] [35/57] preinstalling gmp-x86-arm... [ 1s] [36/57] preinstalling mpc-x86-arm... [ 1s] [37/57] preinstalling mpfr-x86-arm... [ 1s] [38/57] preinstalling bzip2-libs-x86-arm... [ 1s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_9/root,if=virtio,cache=unsafe -drive file=/srv/build/root_9/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_9/swap,if=virtio,cache=unsafe -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 4689/2392064 files, 238997/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] /.build/build: line 770: mount: command not found [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:xcb-proto.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xcb-proto.spec build rpmlint-Factory ... [ 8s] running rpm-x86-arm postinstall script [ 9s] running rpm-libs-x86-arm postinstall script [ 9s] running tizen-accelerator postinstall script [ 9s] running bash-x86-arm postinstall script [ 9s] initializing rpm db... [ 13s] [1/142] installing cross-armv7l-platformfile-0.0.1-1.1 [ 13s] [2/142] installing kernel-headers-linux-3.0-3.0.101-1.3 [ 13s] [3/142] installing tizen-release-2.2.0-1.1 [ 13s] [4/142] installing tzdata-2014j-1.1 [ 13s] [5/142] installing libgcc-4.6.4-1.5 [ 13s] [6/142] installing setup-0.1-1.1 [ 13s] [7/142] installing filesystem-0.1-1.1 [ 13s] warning: group lock does not exist - using root [ 13s] [8/142] installing eglibc-2.13-2.1 [ 14s] [9/142] installing libstdc++-4.6.4-1.5 [ 14s] [10/142] installing eglibc-common-2.13-2.1 [ 14s] [11/142] installing libstdc++-devel-4.6.4-1.5 [ 14s] [12/142] installing bash-4.1-1.1 [ 14s] [13/142] installing bzip2-libs-1.0.5-1.1 [ 14s] [14/142] installing cpio-2.8-1.1 [ 15s] [15/142] installing diffutils-3.0-1.1 [ 15s] [16/142] installing e2fsprogs-libs-1.41.9-1.4 [ 15s] [17/142] installing elfutils-libelf-0.152-1.7 [ 15s] [18/142] installing fdupes-1.40-1.1 [ 15s] [19/142] installing findutils-4.2.31-1.1 [ 15s] [20/142] installing gdbm-1.8.3-1.1 [ 16s] [21/142] installing libattr-2.4.44-1.3 [ 16s] [22/142] installing libgomp-4.6.4-1.5 [ 16s] [23/142] installing liblua-5.1.4-1.1 [ 16s] [24/142] installing libuuid-2.20.2-1.1 [ 17s] [25/142] installing lzo-2.03-1.1 [ 17s] [26/142] installing m4-1.4.14-1.1 [ 17s] [27/142] installing net-tools-1.60-1.4 [ 17s] [28/142] installing nspr-4.9-1.9 [ 17s] [29/142] installing nss-softokn-freebl-3.12.9-1.12 [ 17s] [30/142] installing patch-2.6-1.1 [ 17s] [31/142] installing pkg-config-0.25-1.1 [ 17s] [32/142] installing popt-1.16-1.1 [ 17s] [33/142] installing readline-5.2-1.1 [ 17s] [34/142] installing sed-4.1.5-1.1 [ 17s] [35/142] installing sqlite-3.7.13-1.1 [ 17s] [36/142] installing tar-1.17-1.1 [ 17s] [37/142] installing xz-libs-5.0.3-1.1 [ 18s] [38/142] installing zlib-1.2.5-1.9 [ 18s] [39/142] installing gmp-4.2.1-1.1 [ 18s] [40/142] installing libpcre-7.7-1.1 [ 18s] [41/142] installing ncurses-libs-5.7-1.1 [ 18s] [42/142] installing build-compare-2009.10.14-1.8 [ 18s] [43/142] installing qemu.x86_64-1.2-1.1 [ 19s] [44/142] installing eglibc-headers-2.13-2.1 [ 19s] [45/142] installing libcap-2.21-1.1 [ 20s] [46/142] installing unzip-6.0-1.7 [ 20s] [47/142] installing zlib-devel-1.2.5-1.9 [ 20s] [48/142] installing grep-2.5.1a-1.1 [ 20s] [49/142] installing libacl-2.2.49-1.1 [ 20s] [50/142] installing libfile-5.04-1.1 [ 20s] [51/142] installing libpython-2.7.1-1.7 [ 20s] [52/142] installing lzo-minilzo-2.03-1.1 [ 20s] [53/142] installing make-3.82-1.1 [ 20s] [54/142] installing mpfr-3.0.0-1.1 [ 20s] [55/142] installing ncurses-5.7-1.1 [ 20s] [56/142] installing bzip2-1.0.5-1.1 [ 21s] [57/142] installing libblkid-2.20.2-1.1 [ 21s] [58/142] installing xz-5.0.3-1.1 [ 21s] [59/142] installing binutils-2.22-1.6 [ 21s] [60/142] installing elfutils-libs-0.152-1.7 [ 21s] [61/142] installing nss-3.12.9-1.12 [ 21s] [62/142] installing perl-5.12.1-1.6 [ 22s] [63/142] installing ncurses-base-5.7-1.1 [ 22s] [64/142] installing perl-HTML-Tagset-3.20-1.1 [ 22s] [65/142] installing perl-IO-Compress-Base-2.008-1.6 [ 22s] [66/142] installing perl-Module-Pluggable-3.60-1.6 [ 22s] [67/142] installing perl-Pod-Escapes-1.04-1.6 [ 22s] [68/142] installing perl-TimeDate-1.20-1.1 [ 22s] [69/142] installing eglibc-devel-2.13-2.1 [ 22s] [70/142] installing file-5.04-1.1 [ 23s] [71/142] installing lzo-devel-2.03-1.1 [ 23s] [72/142] installing perl-Compress-Raw-Zlib-2.008-1.6 [ 23s] [73/142] installing perl-devel-5.12.1-1.6 [ 23s] [74/142] installing perl-libs-5.12.1-1.6 [ 23s] [75/142] installing coreutils-6.9-1.8 [ 23s] [76/142] installing libmount-2.20.2-1.1 [ 23s] [77/142] installing mpc-0.9-1.1 [ 23s] [78/142] installing xz-lzma-compat-5.0.3-1.1 [ 23s] [79/142] installing elfutils-0.152-1.7 [ 23s] [80/142] installing nss-sysinit-3.12.9-1.12 [ 23s] [81/142] installing python-base-2.7.1-1.7 [ 24s] [82/142] installing rpm-libs-4.9.1-1.1 [ 24s] [83/142] installing perl-ExtUtils-ParseXS-2.18-1.6 [ 24s] [84/142] installing perl-Pod-Simple-3.07-1.6 [ 24s] [85/142] installing perl-Test-Simple-0.80-1.6 [ 24s] [86/142] installing tizen-accelerator-1.0.1-1.1 [ 24s] [87/142] installing perl-IO-Compress-Zlib-2.008-1.6 [ 24s] [88/142] installing perl-Test-Harness-3.12-1.6 [ 25s] [89/142] installing gawk-3.1.5-1.4 [ 25s] [90/142] installing gzip-1.3.12-1.1 [ 25s] [91/142] installing build-2011.01.10a-1.1 [ 25s] [92/142] installing python-devel-2.7.1-1.7 [ 25s] [93/142] installing rpm-4.9.1-1.1 [ 25s] [94/142] installing cpp-4.6.4-1.5 [ 26s] [95/142] installing util-linux-2.20.2-1.1 [ 26s] [96/142] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 26s] [97/142] installing eglibc-x86-arm-2.13-1.3 [ 26s] [98/142] installing elfutils-libelf-x86-arm-0.152-2.1 [ 26s] [99/142] installing elfutils-libs-x86-arm-0.152-2.2 [ 26s] [100/142] installing gmp-x86-arm-4.2.1-2.1 [ 27s] [101/142] installing libacl-x86-arm-2.2.49-2.1 [ 27s] [102/142] installing libattr-x86-arm-2.4.44-2.1 [ 27s] [103/142] installing libcap-x86-arm-2.21-2.1 [ 27s] [104/142] installing libfile-x86-arm-5.04-2.1 [ 27s] [105/142] installing libgcc-x86-arm-4.6.4-2.1 [ 27s] [106/142] installing liblua-x86-arm-5.1.4-2.1 [ 27s] [107/142] installing mpc-x86-arm-0.9-2.1 [ 27s] [108/142] installing mpfr-x86-arm-3.0.0-2.1 [ 27s] [109/142] installing ncurses-libs-x86-arm-5.7-2.1 [ 28s] [110/142] installing nspr-x86-arm-4.9-2.2 [ 28s] [111/142] installing nss-softokn-freebl-x86-arm-3.12.9-2.2 [ 28s] [112/142] installing nss-x86-arm-3.12.9-2.2 [ 28s] [113/142] installing perl-ExtUtils-MakeMaker-6.36-1.6 [ 28s] [114/142] installing popt-x86-arm-1.16-2.1 [ 28s] [115/142] installing rpm-libs-x86-arm-4.9.1-2.1 [ 28s] [116/142] installing sqlite-x86-arm-3.7.13-2.1 [ 28s] [117/142] installing xz-libs-x86-arm-5.0.3-2.1 [ 29s] [118/142] installing zlib-x86-arm-1.2.5-2.1 [ 29s] [119/142] installing gcc-4.6.4-1.5 [ 29s] [120/142] installing rpm-build-4.9.1-1.1 [ 29s] [121/142] installing perl-CPAN-1.9205-1.6 [ 29s] [122/142] installing bash-x86-arm-4.1-2.1 [ 29s] [123/142] installing fdupes-x86-arm-1.40-2.1 [ 29s] [124/142] installing findutils-x86-arm-4.2.31-2.1 [ 29s] [125/142] installing gawk-x86-arm-3.1.5-2.1 [ 30s] [126/142] installing gzip-x86-arm-1.3.12-2.1 [ 30s] [127/142] installing make-x86-arm-3.82-2.1 [ 30s] [128/142] installing sed-x86-arm-4.1.5-2.1 [ 30s] [129/142] installing tar-x86-arm-1.17-2.1 [ 30s] [130/142] installing diffutils-x86-arm-3.0-2.1 [ 30s] [131/142] installing patch-x86-arm-2.6-2.1 [ 30s] [132/142] installing autoconf-2.68-1.1 [ 30s] [133/142] installing coreutils-x86-arm-6.9-2.1 [ 33s] [134/142] installing file-x86-arm-5.04-2.1 [ 33s] [135/142] installing elfutils-x86-arm-0.152-2.2 [ 33s] [136/142] installing gcc-c++-4.6.4-1.5 [ 33s] [137/142] installing rpm-x86-arm-4.9.1-2.1 [ 33s] /bin/rpm.orig-arm already present - skipping. [ 33s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 33s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 33s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 33s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 33s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 33s] [138/142] installing rpm-build-x86-arm-4.9.1-2.1 [ 33s] [139/142] installing automake-1.11.1-1.1 [ 33s] [140/142] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1 [ 34s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 34s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 34s] [141/142] installing libtool-2.2.6b-1.1 [ 34s] [142/142] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.3 [ 35s] removing nis flags from //etc/nsswitch.conf... [ 35s] now finalizing build dir... [ 35s] /.build/build: line 2585: mount: command not found [ 35s] /.build/build: line 2586: mount: command not found [ 38s] build target is armv7l-tizen-linux [ 38s] ----------------------------------------------------------------- [ 38s] I have the following modifications for xcb-proto.spec: [ 38s] 5c5 [ 38s] < Release: 3 [ 38s] --- [ 38s] > Release: 1.2 [ 38s] ----------------------------------------------------------------- [ 38s] ----- building xcb-proto.spec (user abuild) [ 38s] ----------------------------------------------------------------- [ 38s] ----------------------------------------------------------------- [ 38s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Mobile/target/d238bfcad45b99dac1d79bf0b6cb8a05-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec [ 40s] Building target platforms: armv7l-tizen-linux [ 40s] Building for target armv7l-tizen-linux [ 40s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.csOgDE [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + rm -rf xcb-proto-1.7.1 [ 40s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz [ 40s] + /bin/tar -xf - [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd xcb-proto-1.7.1 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + exit 0 [ 40s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.7945C8 [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd xcb-proto-1.7.1 [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + LD_AS_NEEDED=1 [ 40s] + export LD_AS_NEEDED [ 40s] + ./autogen.sh [ 44s] autoreconf: Entering directory `.' [ 44s] autoreconf: configure.ac: not using Gettext [ 45s] autoreconf: running: aclocal [ 50s] autoreconf: configure.ac: tracing [ 52s] autoreconf: configure.ac: not using Libtool [ 52s] autoreconf: running: /usr/bin/autoconf [ 55s] autoreconf: configure.ac: not using Autoheader [ 55s] autoreconf: running: automake --add-missing --copy --no-force [ 58s] configure.ac:9: installing `./install-sh' [ 58s] configure.ac:9: installing `./missing' [ 60s] autoreconf: Leaving directory `.' [ 60s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 60s] checking for a BSD-compatible install... /usr/bin/install -c [ 61s] checking whether build environment is sane... yes [ 61s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 61s] checking for gawk... gawk [ 61s] checking whether make sets $(MAKE)... yes [ 61s] checking for xmllint... no [ 61s] configure: WARNING: xmllint not found; unable to validate against schema. [ 62s] checking for a Python interpreter with version >= 2.5... python [ 62s] checking for python... /usr/bin/python [ 63s] checking for python version... 2.7 [ 64s] checking for python platform... linux3 [ 65s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 65s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 65s] configure: creating ./config.status [ 66s] config.status: creating Makefile [ 66s] config.status: creating src/Makefile [ 66s] config.status: creating xcbgen/Makefile [ 66s] config.status: creating xcb-proto.pc [ 66s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 66s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + autoreconf -v --install --force [ 69s] autoreconf: Entering directory `.' [ 69s] autoreconf: configure.ac: not using Gettext [ 70s] autoreconf: running: aclocal --force [ 75s] autoreconf: configure.ac: tracing [ 77s] autoreconf: configure.ac: not using Libtool [ 77s] autoreconf: running: /usr/bin/autoconf --force [ 81s] autoreconf: configure.ac: not using Autoheader [ 81s] autoreconf: running: automake --add-missing --copy --force-missing [ 86s] autoreconf: Leaving directory `.' [ 86s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared [ 86s] configure: WARNING: unrecognized options: --disable-shared [ 86s] checking for a BSD-compatible install... /usr/bin/install -c [ 87s] checking whether build environment is sane... yes [ 87s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 87s] checking for gawk... gawk [ 87s] checking whether make sets $(MAKE)... yes [ 87s] checking for xmllint... no [ 87s] configure: WARNING: xmllint not found; unable to validate against schema. [ 88s] checking for a Python interpreter with version >= 2.5... python [ 88s] checking for python... /usr/bin/python [ 89s] checking for python version... 2.7 [ 90s] checking for python platform... linux3 [ 91s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 91s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 91s] configure: creating ./config.status [ 92s] config.status: creating Makefile [ 92s] config.status: creating src/Makefile [ 92s] config.status: creating xcbgen/Makefile [ 92s] config.status: creating xcb-proto.pc [ 92s] configure: WARNING: unrecognized options: --disable-shared [ 92s] + make -j4 [ 92s] Making all in src [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] make[1]: Nothing to be done for `all'. [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] Making all in xcbgen [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 92s] make[1]: Nothing to be done for `all'. [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 92s] make[1]: Nothing to be done for `all-am'. [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 92s] + exit 0 [ 92s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3VmApI [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd xcb-proto-1.7.1 [ 92s] + LANG=C [ 92s] + export LANG [ 92s] + unset DISPLAY [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 92s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 92s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 92s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm install [ 92s] Making install in src [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] make[2]: Nothing to be done for `install-exec-am'. [ 92s] test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/xcb" [ 92s] /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/xcb' [ 92s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 92s] Making install in xcbgen [ 92s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 92s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 92s] make[2]: Nothing to be done for `install-exec-am'. [ 92s] test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/lib/python2.7/site-packages/xcbgen" [ 92s] /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/lib/python2.7/site-packages/xcbgen' [ 93s] Byte-compiling python modules... [ 93s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 93s] Byte-compiling python modules (optimized versions) ... [ 94s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 94s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 94s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 94s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 94s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 94s] make[2]: Nothing to be done for `install-exec-am'. [ 94s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/lib/pkgconfig" [ 94s] /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/lib/pkgconfig' [ 94s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 94s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 94s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/info/dir [ 94s] + xargs rm -f -- [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm -regex '.*\.la$' [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm -regex '.*\.a$' [ 94s] + xargs rm -f -- [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/info [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/doc [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/doc/xcb-proto [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/gtk-doc [ 94s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm/usr/share/man [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm -regex '.*/man/man./.*.[0-9]' [ 94s] + xargs rm -f -- [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm -regex '.*/man/../man./.*.[0-9]' [ 94s] + xargs rm -f -- [ 94s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 94s] + xargs rm -f -- [ 94s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1 [ 94s] + /usr/lib/rpm/check-buildroot [ 94s] + /usr/lib/rpm//brp-compress [ 94s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 94s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 94s] + /usr/lib/rpm/brp-python-hardlink [ 94s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 94s] Processing files: xcb-proto-1.7.1-1.2.armv7l [ 95s] Provides: pkgconfig(xcb-proto) = 1.7.1 [ 95s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 95s] Requires: /usr/bin/pkg-config python(abi) = 2.7 [ 95s] Processing files: xcb-proto-debuginfo-1.7.1-1.2.armv7l [ 95s] Processing files: xcb-proto-debugsource-1.7.1-1.2.armv7l [ 95s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 95s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 95s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-1.2.armv7l.rpm [ 95s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-1.2.armv7l.rpm [ 95s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-1.2.armv7l.rpm [ 95s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.d9lJWg [ 95s] + umask 022 [ 95s] + cd /home/abuild/rpmbuild/BUILD [ 95s] + cd xcb-proto-1.7.1 [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 95s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.arm [ 95s] + exit 0 [ 95s] ... checking for files with abuild user/group [ 95s] ... creating baselibs [ 96s] ... comparing built packages with the former built [ 96s] /usr/lib/build/rpm-check.sh [ 96s] compare /.build.oldpackages/xcb-proto-1.7.1-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 96s] compare /.build.oldpackages/xcb-proto-1.7.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-1.2.armv7l.rpm [ 97s] /usr/lib/python2.7/site-packages/xcbgen/__init__.pyc differs ( DBase 3 data file (1429221424 records)) [ 97s] --- /tmp/tmp.GQMRQOXfeA 2016-04-14 09:20:58.539475036 +0000 [ 97s] +++ /tmp/tmp.utYfTAbNNG 2016-04-14 09:20:58.559475036 +0000 [ 97s] @@ -1,4 +1,4 @@ [ 97s] -00000000 03 f3 0d 30 30 30 30 55 63 00 00 00 00 00 00 00 |...0000Uc.......| [ 97s] +00000000 03 f3 0d 30 30 30 30 57 63 00 00 00 00 00 00 00 |...0000Wc.......| [ 97s] 00000010 00 01 00 00 00 40 00 00 00 73 04 00 00 00 64 00 |.....@...s....d.| [ 97s] 00000020 00 53 28 01 00 00 00 4e 28 00 00 00 00 28 00 00 |.S(....N(....(..| [ 97s] 00000030 00 00 28 00 00 00 00 28 00 00 00 00 73 33 00 00 |..(....(....s3..| [ 97s] compare /.build.oldpackages/xcb-proto-debuginfo-1.7.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-1.2.armv7l.rpm [ 97s] compare /.build.oldpackages/xcb-proto-debugsource-1.7.1-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-1.2.armv7l.rpm [ 97s] ... saving built statistics [ 97s] /.build/build: line 3144: mount: command not found [ 97s] ERROR: no root disk device found, yet another new device name? [ 97s] ls: cannot access /sys/block/: No such file or directory [ 97s] /.build/build: line 3159: umount: command not found [ 97s] ... saving built packages [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-1.7.1-1.2.armv7l.rpm [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debuginfo-1.7.1-1.2.armv7l.rpm [ 97s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-proto-debugsource-1.7.1-1.2.armv7l.rpm [ 97s] /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 97s] /home/abuild/rpmbuild/OTHER/_statistics [ 97s] [ 97s] w11 finished "build xcb-proto.spec" at Thu Apr 14 09:20:59 UTC 2016. [ 97s] [ 98s] /.build/build: line 368: 220 Killed background_monitor_process [ 100s] [ 94.123307] SysRq : Power Off [ 100s] [ 94.232326] Power down. [ 101s] build: extracting built packages... [ 101s] xcb-proto-1.7.1-1.2.armv7l.rpm [ 101s] xcb-proto-debuginfo-1.7.1-1.2.armv7l.rpm [ 101s] xcb-proto-debugsource-1.7.1-1.2.armv7l.rpm [ 101s] xcb-proto-1.7.1-1.2.src.rpm [ 101s] _statistics Retried build at Mon May 30 06:53:53 2016 returned same result, skipped Retried build at Mon May 30 09:16:13 2016 returned same result, skipped