[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:xorg-x11-drv-gesture.spec" at Mon May 30 17:02:16 UTC 2016. [ 0s] [ 0s] Building xorg-x11-drv-gesture for project 'Tizen:2.3.1:Mobile' repository 'target' arch 'armv7l' srcmd5 '4f13d2f5e240f103dadfdfcb4a98abfc' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec build rpmlint-Factory ... [ 1s] registering binfmt handlers for VM [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 1s] Please check cpu value and header information for m68k! [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 1s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 2s] [8/57] preinstalling bzip2-libs... [ 2s] [9/57] preinstalling diffutils... [ 2s] [10/57] preinstalling elfutils-libelf... [ 2s] [11/57] preinstalling libattr... [ 2s] [12/57] preinstalling liblua... [ 2s] [13/57] preinstalling libstdc++... [ 2s] [14/57] preinstalling ncurses-libs... [ 2s] [15/57] preinstalling nspr... [ 2s] [16/57] preinstalling nss-softokn-freebl... [ 2s] [17/57] preinstalling popt... [ 2s] [18/57] preinstalling readline... [ 2s] [19/57] preinstalling sed... [ 2s] [20/57] preinstalling sqlite... [ 2s] [21/57] preinstalling tar... [ 2s] [22/57] preinstalling xz-libs... [ 2s] [23/57] preinstalling zlib... [ 2s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 3s] [34/57] preinstalling rpm... [ 3s] [35/57] preinstalling gmp-x86-arm... [ 3s] [36/57] preinstalling mpc-x86-arm... [ 3s] [37/57] preinstalling mpfr-x86-arm... [ 3s] [38/57] preinstalling bzip2-libs-x86-arm... [ 3s] [39/57] preinstalling eglibc-x86-arm... [ 3s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 3s] [41/57] preinstalling libacl-x86-arm... [ 3s] [42/57] preinstalling libattr-x86-arm... [ 3s] [43/57] preinstalling libcap-x86-arm... [ 3s] [44/57] preinstalling libfile-x86-arm... [ 3s] [45/57] preinstalling libgcc-x86-arm... [ 3s] [46/57] preinstalling liblua-x86-arm... [ 3s] [47/57] preinstalling ncurses-libs-x86-arm... [ 3s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 4s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus-libs -> dbus [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 15s] booting kvm ... [ 15s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 6000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 17s] doing fast boot [ 18s] Creating device nodes with udev [ 20s] Waiting for device /dev/vda to appear: ok [ 20s] fsck from util-linux 2.21.2 [ 20s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 20s] /dev/vda: clean, 4791/2392064 files, 238744/9568256 blocks [ 20s] fsck succeeded. Mounting root device read-write. [ 20s] Mounting root /dev/vda [ 20s] mount -o rw -t ext4 /dev/vda /root [ 20s] replacing /etc/mtab with symlink to /proc/self/mounts [ 20s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 21s] 2nd stage started in virtual machine [ 21s] machine type: armv7l [ 21s] switching personality to 8... [ 21s] 2nd stage started in virtual machine [ 21s] machine type: armv7l [ 21s] /.build/build: line 770: mount: command not found [ 21s] swapon on /dev/vdb [ 21s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 21s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 21s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 21s] logging output to //.build.log... [ 22s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec ... [ 22s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec build rpmlint-Factory ... [ 22s] running rpm-x86-arm postinstall script [ 22s] running rpm-libs-x86-arm postinstall script [ 22s] running tizen-accelerator postinstall script [ 24s] running bash-x86-arm postinstall script [ 24s] initializing rpm db... [ 46s] [1/194] installing cross-armv7l-platformfile-0.0.1-1.1 [ 46s] [2/194] installing kernel-headers-linux-3.0-3.0.101-1.5 [ 47s] [3/194] installing libX11-common-1.5.0-1.6 [ 48s] [4/194] installing tizen-release-2.2.0-1.1 [ 49s] [5/194] installing tzdata-2014j-1.1 [ 49s] [6/194] installing libgcc-4.6.4-1.14 [ 50s] [7/194] installing setup-0.1-1.1 [ 51s] [8/194] installing filesystem-0.1-1.1 [ 63s] warning: group lock does not exist - using root [ 63s] [9/194] installing eglibc-2.13-3.10 [ 67s] [10/194] installing libstdc++-4.6.4-1.14 [ 69s] [11/194] installing eglibc-common-2.13-3.10 [ 71s] [12/194] installing libstdc++-devel-4.6.4-1.14 [ 72s] [13/194] installing bash-4.1-1.2 [ 72s] [14/194] installing bzip2-libs-1.0.5-1.2 [ 72s] [15/194] installing capi-base-common-0.1.9-1.1 [ 73s] [16/194] installing cpio-2.8-1.2 [ 73s] [17/194] installing diffutils-3.0-1.2 [ 74s] [18/194] installing e2fsprogs-libs-1.41.9-1.6 [ 74s] [19/194] installing elfutils-libelf-0.152-1.16 [ 74s] [20/194] installing expat-2.0.1-1.1 [ 75s] [21/194] installing fdupes-1.40-1.1 [ 75s] [22/194] installing findutils-4.2.31-1.2 [ 75s] [23/194] installing gdbm-1.8.3-1.1 [ 75s] [24/194] installing libXau-1.0.7-1.1 [ 75s] [25/194] installing libXdmcp-1.1.1-1.1 [ 76s] [26/194] installing libattr-2.4.44-1.4 [ 76s] [27/194] installing libdrm2-2.4.35-1.2 [ 76s] [28/194] installing libgomp-4.6.4-1.14 [ 76s] [29/194] installing libgpg-error-1.7-1.1 [ 77s] [30/194] installing liblua-5.1.4-1.2 [ 77s] [31/194] installing libunwind-1.1-1.8 [ 77s] [32/194] installing libuuid-2.20.2-1.2 [ 77s] [33/194] installing lzo-2.03-1.1 [ 77s] [34/194] installing m4-1.4.14-1.2 [ 77s] [35/194] installing net-tools-1.60-1.5 [ 78s] [36/194] installing nspr-4.9-1.17 [ 78s] [37/194] installing nss-softokn-freebl-3.12.9-1.24 [ 78s] [38/194] installing patch-2.6-1.2 [ 78s] [39/194] installing pixman-0.28.2-1.2 [ 78s] [40/194] installing pkg-config-0.25-1.2 [ 78s] [41/194] installing popt-1.16-1.1 [ 78s] [42/194] installing readline-5.2-1.2 [ 78s] [43/194] installing sed-4.1.5-1.1 [ 78s] [44/194] installing smack-1.0+s14-1.2 [ 78s] [45/194] installing sqlite-3.7.13-1.2 [ 79s] [46/194] installing tar-1.17-1.2 [ 79s] [47/194] installing xz-libs-5.0.3-1.2 [ 79s] [48/194] installing zlib-1.2.5-1.17 [ 79s] [49/194] installing gmp-4.2.1-1.1 [ 79s] [50/194] installing libpcre-7.7-1.2 [ 79s] [51/194] installing ncurses-libs-5.7-1.2 [ 79s] [52/194] installing build-compare-2009.10.14-1.12 [ 79s] [53/194] installing libpthread-stubs-0.3-1.1 [ 80s] [54/194] installing qemu.x86_64-1.2-1.1 [ 82s] [55/194] installing xorg-x11-proto-core-7.0.25-1.1 [ 83s] [56/194] installing xorg-x11-proto-dri2-2.8-1.1 [ 83s] [57/194] installing xorg-x11-proto-fonts-2.1.2-1.1 [ 83s] [58/194] installing xorg-x11-proto-gesture-0.1.0-1.1 [ 83s] [59/194] installing xorg-x11-proto-hwc-0.1.1-1.1 [ 84s] [60/194] installing xorg-x11-proto-input-2.3-1.1 [ 84s] [61/194] installing xorg-x11-proto-kb-1.0.6-1.1 [ 84s] [62/194] installing xorg-x11-proto-randr-1.4-1.1 [ 84s] [63/194] installing xorg-x11-proto-renderproto-0.11.1-1.1 [ 85s] [64/194] installing xorg-x11-proto-resource-1.2.0-1.1 [ 85s] [65/194] installing xorg-x11-proto-video-2.3.1-1.1 [ 85s] [66/194] installing xorg-x11-proto-xext-7.2.1-1.1 [ 85s] [67/194] installing xorg-x11-proto-xinerama-1.2.1-1.1 [ 85s] [68/194] installing xorg-x11-xutils-dev-7.7-1.1 [ 85s] [69/194] installing capi-base-common-devel-0.1.9-1.1 [ 86s] [70/194] installing eglibc-headers-2.13-3.10 [ 86s] [71/194] installing libcap-2.21-1.2 [ 86s] [72/194] installing pixman-devel-0.28.2-1.2 [ 86s] [73/194] installing unzip-6.0-1.15 [ 86s] [74/194] installing zlib-devel-1.2.5-1.17 [ 87s] [75/194] installing grep-2.5.1a-1.1 [ 87s] [76/194] installing libacl-2.2.49-1.2 [ 87s] [77/194] installing libfile-5.04-1.1 [ 87s] [78/194] installing libfontenc-1.1.0-1.1 [ 87s] [79/194] installing libgcrypt-1.4.4-1.2 [ 87s] [80/194] installing libpciaccess-0.13.1-1.1 [ 88s] [81/194] installing libpng-1.2.50-1.1 [ 88s] [82/194] installing libxcb-1.8.1-1.1 [ 88s] [83/194] installing lzo-minilzo-2.03-1.1 [ 88s] [84/194] installing make-3.82-1.2 [ 88s] [85/194] installing mpfr-3.0.0-1.1 [ 88s] [86/194] installing ncurses-5.7-1.2 [ 89s] [87/194] installing systemd-libs-210-1.6 [ 89s] [88/194] installing bzip2-1.0.5-1.2 [ 89s] [89/194] installing libblkid-2.20.2-1.2 [ 89s] [90/194] installing smack-utils-1.0+s14-1.2 [ 90s] [91/194] installing xz-5.0.3-1.2 [ 90s] [92/194] installing binutils-2.22-1.9 [ 91s] [93/194] installing elfutils-libs-0.152-1.16 [ 92s] [94/194] installing nss-3.12.9-1.24 [ 92s] [95/194] installing perl-5.12.1-1.10 [ 96s] [96/194] installing ncurses-base-5.7-1.2 [ 97s] [97/194] installing perl-HTML-Tagset-3.20-1.1 [ 97s] [98/194] installing perl-IO-Compress-Base-2.008-1.10 [ 97s] [99/194] installing perl-Module-Pluggable-3.60-1.10 [ 97s] [100/194] installing perl-Pod-Escapes-1.04-1.10 [ 97s] [101/194] installing perl-TimeDate-1.20-1.1 [ 97s] [102/194] installing eglibc-devel-2.13-3.10 [ 97s] [103/194] installing libpciaccess-devel-0.13.1-1.1 [ 97s] [104/194] installing file-5.04-1.1 [ 97s] [105/194] installing libXau-devel-1.0.7-1.1 [ 98s] [106/194] installing lzo-devel-2.03-1.1 [ 98s] [107/194] installing perl-Compress-Raw-Zlib-2.008-1.10 [ 98s] [108/194] installing perl-devel-5.12.1-1.10 [ 98s] [109/194] installing perl-libs-5.12.1-1.10 [ 98s] [110/194] installing coreutils-6.9-1.14 [ 98s] [111/194] installing freetype-2.5.5-1.1 [ 99s] [112/194] installing libX11-1.5.0-1.6 [ 99s] [113/194] installing libdlog-0.4.1-2.1 [ 99s] [114/194] installing libmount-2.20.2-1.2 [ 100s] [115/194] installing mpc-0.9-1.1 [ 100s] [116/194] installing xz-lzma-compat-5.0.3-1.2 [ 100s] [117/194] installing elfutils-0.152-1.16 [ 105s] [118/194] installing nss-sysinit-3.12.9-1.24 [ 105s] [119/194] installing rpm-libs-4.9.1-1.2 [ 106s] [120/194] installing perl-ExtUtils-ParseXS-2.18-1.10 [ 106s] [121/194] installing perl-Pod-Simple-3.07-1.10 [ 106s] [122/194] installing perl-Test-Simple-0.80-1.10 [ 107s] [123/194] installing tizen-accelerator-1.0.1-1.1 [ 108s] [124/194] installing libdlog-devel-0.4.1-2.1 [ 108s] [125/194] installing libxkbfile-1.0.8-1.1 [ 110s] [126/194] installing perl-IO-Compress-Zlib-2.008-1.10 [ 111s] [127/194] installing perl-Test-Harness-3.12-1.10 [ 111s] [128/194] installing dlogutil-0.4.1-2.1 [ 112s] /var/tmp/rpm-tmp.LdTnl1: line 1: systemctl: command not found [ 112s] warning: %post(dlogutil-0.4.1-2.1.armv7l) scriptlet failed, exit status 127 [ 112s] [129/194] installing gawk-3.1.5-1.7 [ 112s] [130/194] installing gzip-1.3.12-1.2 [ 112s] [131/194] installing libxcb-devel-1.8.1-1.1 [ 112s] [132/194] installing build-2011.01.10a-1.1 [ 113s] [133/194] installing libXfont-1.4.5-1.1 [ 114s] [134/194] installing rpm-4.9.1-1.2 [ 115s] [135/194] installing cpp-4.6.4-1.14 [ 116s] [136/194] installing sys-assert-0.3.2-1.2 [ 116s] [137/194] installing dbus-1.6.4-1.2 [ 117s] [138/194] installing util-linux-2.20.2-1.2 [ 119s] [139/194] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 120s] [140/194] installing dbus-libs-1.6.4-1.2 [ 120s] [141/194] installing eglibc-x86-arm-2.13-1.5 [ 121s] [142/194] installing elfutils-libelf-x86-arm-0.152-2.1 [ 122s] [143/194] installing elfutils-libs-x86-arm-0.152-2.4 [ 122s] [144/194] installing gmp-x86-arm-4.2.1-2.1 [ 123s] [145/194] installing libacl-x86-arm-2.2.49-2.2 [ 124s] [146/194] installing libattr-x86-arm-2.4.44-2.1 [ 124s] [147/194] installing libcap-x86-arm-2.21-2.2 [ 125s] [148/194] installing libfile-x86-arm-5.04-2.1 [ 126s] [149/194] installing libgcc-x86-arm-4.6.4-2.2 [ 127s] [150/194] installing liblua-x86-arm-5.1.4-2.1 [ 127s] [151/194] installing mpc-x86-arm-0.9-2.1 [ 127s] [152/194] installing mpfr-x86-arm-3.0.0-2.1 [ 128s] [153/194] installing ncurses-libs-x86-arm-5.7-2.1 [ 129s] [154/194] installing nspr-x86-arm-4.9-2.4 [ 129s] [155/194] installing nss-softokn-freebl-x86-arm-3.12.9-2.4 [ 130s] [156/194] installing nss-x86-arm-3.12.9-2.4 [ 131s] [157/194] installing perl-ExtUtils-MakeMaker-6.36-1.10 [ 131s] [158/194] installing popt-x86-arm-1.16-2.1 [ 132s] [159/194] installing rpm-libs-x86-arm-4.9.1-2.2 [ 133s] [160/194] installing sqlite-x86-arm-3.7.13-2.2 [ 134s] [161/194] installing xz-libs-x86-arm-5.0.3-2.1 [ 134s] [162/194] installing zlib-x86-arm-1.2.5-2.1 [ 134s] [163/194] installing libX11-devel-1.5.0-1.6 [ 134s] [164/194] installing xorg-x11-xkb-utils-7.9.1-1.1 [ 135s] [165/194] installing gcc-4.6.4-1.14 [ 136s] [166/194] installing rpm-build-4.9.1-1.2 [ 136s] [167/194] installing xkeyboard-config-2.9.1-1.1 [ 137s] [168/194] installing perl-CPAN-1.9205-1.10 [ 137s] [169/194] installing bash-x86-arm-4.1-2.2 [ 137s] [170/194] installing fdupes-x86-arm-1.40-2.1 [ 137s] [171/194] installing findutils-x86-arm-4.2.31-2.2 [ 137s] [172/194] installing gawk-x86-arm-3.1.5-2.2 [ 138s] [173/194] installing gzip-x86-arm-1.3.12-2.1 [ 138s] [174/194] installing make-x86-arm-3.82-2.2 [ 138s] [175/194] installing sed-x86-arm-4.1.5-2.1 [ 138s] [176/194] installing tar-x86-arm-1.17-2.2 [ 139s] [177/194] installing diffutils-x86-arm-3.0-2.2 [ 139s] [178/194] installing patch-x86-arm-2.6-2.1 [ 139s] [179/194] installing xorg-x11-module-xdbg-0.1.47-1.2 [ 139s] [180/194] installing autoconf-2.68-1.1 [ 139s] [181/194] installing coreutils-x86-arm-6.9-2.2 [ 144s] [182/194] installing file-x86-arm-5.04-2.1 [ 144s] [183/194] installing elfutils-x86-arm-0.152-2.4 [ 144s] [184/194] installing gcc-c++-4.6.4-1.14 [ 145s] [185/194] installing rpm-x86-arm-4.9.1-2.1 [ 148s] /bin/rpm.orig-arm already present - skipping. [ 148s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 148s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 148s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 148s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 148s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 148s] [186/194] installing rpm-build-x86-arm-4.9.1-2.2 [ 148s] [187/194] installing xorg-x11-server-common-1.13.30-1.6 [ 149s] [188/194] installing automake-1.11.1-1.1 [ 149s] [189/194] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1 [ 157s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 157s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 157s] [190/194] installing libtool-2.2.6b-1.1 [ 157s] [191/194] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 160s] [192/194] installing xorg-x11-server-Xorg-1.13.30-1.6 [ 160s] [193/194] installing xorg-x11-server-devel-1.13.30-1.6 [ 161s] [194/194] installing xorg-x11-module-xdbg-devel-0.1.47-1.2 [ 161s] removing nis flags from //etc/nsswitch.conf... [ 161s] now finalizing build dir... [ 161s] /.build/build: line 2589: mount: command not found [ 161s] /.build/build: line 2590: mount: command not found [ 165s] build target is armv7l-tizen-linux [ 165s] ----------------------------------------------------------------- [ 165s] I have the following modifications for xorg-x11-drv-gesture.spec: [ 165s] 5c5 [ 165s] < Release: 1 [ 165s] --- [ 165s] > Release: 1.2 [ 165s] ----------------------------------------------------------------- [ 165s] ----- building xorg-x11-drv-gesture.spec (user abuild) [ 165s] ----------------------------------------------------------------- [ 165s] ----------------------------------------------------------------- [ 165s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Mobile/target/4f13d2f5e240f103dadfdfcb4a98abfc-xorg-x11-drv-gesture' /home/abuild/rpmbuild/SOURCES/xorg-x11-drv-gesture.spec [ 165s] Building target platforms: armv7l-tizen-linux [ 165s] Building for target armv7l-tizen-linux [ 165s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ZLy4Gv [ 165s] + umask 022 [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + LANG=C [ 165s] + export LANG [ 165s] + unset DISPLAY [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + rm -rf xorg-x11-drv-gesture-0.1.60 [ 165s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-drv-gesture-0.1.60.tar.gz [ 165s] + /bin/tar -xf - [ 165s] + STATUS=0 [ 165s] + '[' 0 -ne 0 ']' [ 165s] + cd xorg-x11-drv-gesture-0.1.60 [ 165s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 165s] + exit 0 [ 165s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.byMhWE [ 165s] + umask 022 [ 165s] + cd /home/abuild/rpmbuild/BUILD [ 165s] + cd xorg-x11-drv-gesture-0.1.60 [ 165s] + LANG=C [ 165s] + export LANG [ 165s] + unset DISPLAY [ 165s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 165s] + export CFLAGS [ 165s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 165s] + export CXXFLAGS [ 165s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 165s] + export FFLAGS [ 165s] + LD_AS_NEEDED=1 [ 165s] + export LD_AS_NEEDED [ 165s] + cd mobile [ 165s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 165s] + export CFLAGS [ 165s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 165s] + export CXXFLAGS [ 165s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 165s] + export FFLAGS [ 165s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info -ivf [ 169s] autoreconf: Entering directory `.' [ 169s] autoreconf: configure.ac: not using Gettext [ 170s] autoreconf: running: aclocal [ 189s] autoreconf: configure.ac: tracing [ 195s] autoreconf: running: libtoolize --copy [ 195s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. [ 195s] libtoolize: copying file `./ltmain.sh' [ 196s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 196s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 196s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 210s] autoreconf: running: /usr/bin/autoconf [ 217s] autoreconf: running: /usr/bin/autoheader [ 220s] autoreconf: running: automake --add-missing --copy --no-force [ 224s] configure.ac:41: installing `./config.guess' [ 224s] configure.ac:41: installing `./config.sub' [ 224s] configure.ac:30: installing `./install-sh' [ 224s] configure.ac:30: installing `./missing' [ 225s] src/Makefile.am: installing `./depcomp' [ 226s] autoreconf: Leaving directory `.' [ 226s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 226s] + export CFLAGS [ 226s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 226s] + export CXXFLAGS [ 226s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 226s] + export FFLAGS [ 226s] + autoreconf -v --install --force [ 229s] autoreconf: Entering directory `.' [ 229s] autoreconf: configure.ac: not using Gettext [ 230s] autoreconf: running: aclocal --force [ 245s] autoreconf: configure.ac: tracing [ 252s] autoreconf: running: libtoolize --copy --force [ 252s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. [ 252s] libtoolize: copying file `./ltmain.sh' [ 252s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 252s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 252s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 267s] autoreconf: running: /usr/bin/autoconf --force [ 279s] autoreconf: running: /usr/bin/autoheader --force [ 286s] autoreconf: running: automake --add-missing --copy --force-missing [ 292s] autoreconf: Leaving directory `.' [ 292s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' LDFLAGS= [ 293s] checking for a BSD-compatible install... /usr/bin/install -c [ 294s] checking whether build environment is sane... yes [ 294s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 294s] checking for gawk... gawk [ 294s] checking whether make sets $(MAKE)... yes [ 294s] checking whether to enable maintainer-specific portions of Makefiles... no [ 294s] checking build system type... armv7l-unknown-linux-gnueabi [ 294s] checking host system type... armv7l-unknown-linux-gnueabi [ 294s] checking for style of include used by make... GNU [ 294s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 294s] checking for gcc... gcc [ 294s] checking whether the C compiler works... yes [ 294s] checking for C compiler default output file name... a.out [ 294s] checking for suffix of executables... [ 294s] checking whether we are cross compiling... no [ 294s] checking for suffix of object files... o [ 294s] checking whether we are using the GNU C compiler... yes [ 294s] checking whether gcc accepts -g... yes [ 294s] checking for gcc option to accept ISO C89... none needed [ 295s] checking dependency style of gcc... gcc3 [ 295s] checking for a sed that does not truncate output... /bin/sed [ 295s] checking for grep that handles long lines and -e... /bin/grep [ 295s] checking for egrep... /bin/grep -E [ 295s] checking for fgrep... /bin/grep -F [ 295s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 295s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 295s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 295s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 295s] checking whether ln -s works... yes [ 295s] checking the maximum length of command line arguments... 1572864 [ 295s] checking whether the shell understands some XSI constructs... yes [ 295s] checking whether the shell understands "+="... yes [ 295s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 295s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 295s] checking for objdump... objdump [ 295s] checking how to recognize dependent libraries... pass_all [ 295s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 295s] checking for ar... ar [ 295s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 295s] checking for strip... strip [ 295s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 295s] checking for ranlib... ranlib [ 295s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 295s] checking how to run the C preprocessor... gcc -E [ 295s] checking for ANSI C header files... yes [ 295s] checking for sys/types.h... yes [ 295s] checking for sys/stat.h... yes [ 295s] checking for stdlib.h... yes [ 295s] checking for string.h... yes [ 295s] checking for memory.h... yes [ 295s] checking for strings.h... yes [ 295s] checking for inttypes.h... yes [ 295s] checking for stdint.h... yes [ 295s] checking for unistd.h... yes [ 295s] checking for dlfcn.h... yes [ 295s] checking for objdir... .libs [ 295s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 295s] checking for gcc option to produce PIC... -fPIC -DPIC [ 295s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 295s] checking if gcc static flag -static works... no [ 295s] checking if gcc supports -c -o file.o... yes [ 295s] checking if gcc supports -c -o file.o... (cached) yes [ 296s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 296s] checking whether -lc should be explicitly linked in... no [ 296s] checking dynamic linker characteristics... GNU/Linux ld.so [ 296s] checking how to hardcode library paths into programs... immediate [ 296s] checking whether stripping libraries is possible... yes [ 296s] checking if libtool supports shared libraries... yes [ 296s] checking whether to build shared libraries... yes [ 296s] checking whether to build static libraries... no [ 296s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 296s] checking whether we are using the GNU C compiler... (cached) yes [ 296s] checking whether gcc accepts -g... (cached) yes [ 296s] checking for gcc option to accept ISO C89... (cached) none needed [ 296s] checking dependency style of gcc... (cached) gcc3 [ 296s] checking for gcc option to accept ISO C99... -std=gnu99 [ 296s] checking whether __clang__ is declared... no [ 296s] checking whether __INTEL_COMPILER is declared... no [ 296s] checking whether __SUNPRO_C is declared... no [ 296s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 296s] checking for pkg-config... /usr/bin/pkg-config [ 296s] checking pkg-config is at least version 0.9.0... yes [ 296s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 296s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 296s] checking if gcc -std=gnu99 supports-Wall... yes [ 296s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 296s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 296s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 296s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 296s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 296s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 296s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 296s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 296s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 296s] checking if gcc -std=gnu99 supports-Wunused... yes [ 296s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 296s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 296s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 296s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 296s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 297s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 297s] checking if gcc -std=gnu99 supports-pedantic... yes [ 297s] checking if gcc -std=gnu99 supports-Werror... yes [ 297s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 297s] checking for XORG... yes [ 297s] checking for ANSI C header files... (cached) yes [ 297s] configure: creating ./config.status [ 298s] config.status: creating Makefile [ 298s] config.status: creating src/Makefile [ 298s] config.status: creating man/Makefile [ 298s] config.status: creating xorg-gesture.pc [ 298s] config.status: creating config.h [ 298s] config.status: executing depfiles commands [ 298s] config.status: executing libtool commands [ 298s] + make -j4 [ 298s] make all-recursive [ 298s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 298s] Making all in src [ 298s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 298s] CC gesture.lo [ 298s] In file included from /usr/include/xdbg/xdbg.h:40:0, [ 298s] from gesture.c:76: [ 298s] /usr/include/xdbg/xdbg_log.h:45:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c:96:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c:96:22: warning: redundant redeclaration of 'mieqGetEventQueuePtr' [-Wredundant-decls] [ 298s] //usr/include/xorg/mi.h:235:32: note: previous declaration of 'mieqGetEventQueuePtr' was here [ 298s] gesture.c:132:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c:186:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c:250:24: warning: redundant redeclaration of 'DPMSCallback' [-Wredundant-decls] [ 298s] /usr/include/xorg/globals.h:46:34: note: previous declaration of 'DPMSCallback' was here [ 298s] gesture.c: In function 'GestureRecognize_GroupTap': [ 298s] gesture.c:1631:14: warning: variable 'base_time' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c: In function 'GestureRecognize_GroupTapNHold': [ 298s] gesture.c:1869:14: warning: variable 'base_time' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c: At top level: [ 298s] gesture.c:2374:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c: In function 'GestureEnableDisable': [ 298s] gesture.c:2374:1: warning: old-style function definition [-Wold-style-definition] [ 298s] gesture.c: In function 'GesturePalmRecognize_FlickHorizen': [ 298s] gesture.c:2798:13: warning: variable 'release_flag' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:2793:6: warning: variable 'width_size' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c: In function 'GesturePalmRecognize_FlickVertical': [ 298s] gesture.c:3128:13: warning: variable 'false_base_height_size' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:3126:6: warning: variable 'height_size' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c: At top level: [ 298s] gesture.c:3413:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 298s] gesture.c: In function 'GesturePalmGetScreenInfo': [ 298s] gesture.c:3413:1: warning: old-style function definition [-Wold-style-definition] [ 298s] gesture.c: In function 'GesturePalmGetAbsAxisInfo': [ 298s] gesture.c:3476:7: warning: variable 'atom_distance' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:3475:7: warning: variable 'atom_tracking_id' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:3474:7: warning: variable 'atom_mt_slot' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:3473:7: warning: variable 'atom_py' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c:3472:7: warning: variable 'atom_px' set but not used [-Wunused-but-set-variable] [ 298s] gesture.c: In function 'GestureGetMIEQ': [ 298s] gesture.c:4343:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c:4355:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GestureIsEventInMIEQ': [ 298s] gesture.c:4378:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c:4385:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GestureIsPalmEventInMIEQ': [ 298s] gesture.c:4423:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GestureIsPalmEvent': [ 298s] gesture.c:4462:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GestureSetToolData': [ 298s] gesture.c:4991:9: warning: unused variable 'mt_tool' [-Wunused-variable] [ 298s] gesture.c: In function 'GestureCleanupTouch': [ 298s] gesture.c:5012:14: warning: unused variable 'err' [-Wunused-variable] [ 298s] gesture.c: In function 'GestureHandleButtonPressEvent': [ 298s] gesture.c:5175:7: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5211:6: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5210:8: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 298s] gesture.c: In function 'GestureHandleMotionEvent': [ 298s] gesture.c:5296:7: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5328:6: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5327:8: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 298s] gesture.c: In function 'GestureHandleButtonReleaseEvent': [ 298s] gesture.c:5420:7: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5438:26: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c:5485:6: warning: function with qualified void return type called [enabled by default] [ 298s] gesture.c:5484:8: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 298s] gesture.c: In function 'GestureEnableEventHandler': [ 298s] gesture.c:5570:19: warning: unused variable 'pGesture' [-Wunused-variable] [ 298s] gesture.c: In function 'GestureRegisterDeviceInfo': [ 298s] gesture.c:5637:17: warning: unused variable 'height' [-Wunused-variable] [ 298s] gesture.c:5637:6: warning: unused variable 'width' [-Wunused-variable] [ 298s] gesture.c: In function 'GestureGenerateTouchCancelEvent': [ 298s] gesture.c:5771:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c:5791:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GestureSetProperty': [ 298s] gesture.c:6191:4: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 298s] gesture.c: In function 'GesturePreInit': [ 298s] gesture.c:6300:17: warning: assignment from incompatible pointer type [enabled by default] [ 299s] CCLD gesture_drv.la [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 299s] Making all in man [ 299s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] sed -e 's|__vendorversion__|"xserver-xorg-input-gesture 0.1.0" "X Version 11"|' -e 's|__xorgversion__|"xserver-xorg-input-gesture 0.1.0" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's|__xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__appmansuffix__|1|g' -e 's|__drivermansuffix__|4|g' -e 's|__adminmansuffix__|8|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < gesture.man > gesture.4 [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] + exit 0 [ 299s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PLBR4X [ 299s] + umask 022 [ 299s] + cd /home/abuild/rpmbuild/BUILD [ 299s] + cd xorg-x11-drv-gesture-0.1.60 [ 299s] + LANG=C [ 299s] + export LANG [ 299s] + unset DISPLAY [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 299s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 299s] + cd mobile [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 299s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/license [ 299s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/license/xorg-x11-drv-gesture [ 299s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm install [ 299s] Making install in src [ 299s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 299s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 299s] make[2]: Nothing to be done for `install-exec-am'. [ 299s] test -z "/usr/lib/xorg/modules/input" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/xorg/modules/input" [ 299s] /bin/sh ../libtool --mode=install /usr/bin/install -c gesture_drv.la '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/xorg/modules/input' [ 299s] libtool: install: /usr/bin/install -c .libs/gesture_drv.so /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/xorg/modules/input/gesture_drv.so [ 299s] libtool: install: /usr/bin/install -c .libs/gesture_drv.lai /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/xorg/modules/input/gesture_drv.la [ 299s] libtool: install: warning: remember to run `libtool --finish /usr/lib/xorg/modules/input' [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 299s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/src' [ 299s] Making install in man [ 299s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] make[2]: Nothing to be done for `install-exec-am'. [ 299s] test -z "/usr/share/man/man4" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/man/man4" [ 299s] /usr/bin/install -c -m 644 gesture.4 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/man/man4' [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile/man' [ 299s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] make[2]: Nothing to be done for `install-exec-am'. [ 299s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/pkgconfig" [ 299s] /usr/bin/install -c -m 644 xorg-gesture.pc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/pkgconfig' [ 299s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60/mobile' [ 299s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/info/dir [ 299s] + xargs rm -f -- [ 299s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm -regex '.*\.la$' [ 299s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm -regex '.*\.a$' [ 299s] + xargs rm -f -- [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/info [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/doc [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/doc/xorg-x11-drv-gesture [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/gtk-doc [ 299s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/share/man [ 299s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm -regex '.*/man/man./.*.[0-9]' [ 299s] + xargs rm -f -- [ 299s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm -regex '.*/man/../man./.*.[0-9]' [ 299s] + xargs rm -f -- [ 299s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 299s] + xargs rm -f -- [ 299s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.60 [ 299s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm/usr/lib/xorg/modules/input/gesture_drv.so [ 300s] 422 blocks [ 300s] + /usr/lib/rpm/check-buildroot [ 300s] + /usr/lib/rpm//brp-compress [ 300s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 300s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 300s] + /usr/lib/rpm/brp-python-hardlink [ 300s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 300s] Processing files: xorg-x11-drv-gesture-0.1.60-1.2.armv7l [ 300s] Provides: gesture_drv.so [ 300s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 300s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 300s] Processing files: xorg-x11-drv-gesture-devel-0.1.60-1.2.armv7l [ 300s] Provides: pkgconfig(xorg-gesture) = 0.1.0 [ 300s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 300s] Requires: /usr/bin/pkg-config [ 300s] Processing files: xorg-x11-drv-gesture-debuginfo-0.1.60-1.2.armv7l [ 300s] Processing files: xorg-x11-drv-gesture-debugsource-0.1.60-1.2.armv7l [ 300s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 300s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-drv-gesture-0.1.60-1.2.src.rpm [ 300s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-0.1.60-1.2.armv7l.rpm [ 300s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-devel-0.1.60-1.2.armv7l.rpm [ 300s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debuginfo-0.1.60-1.2.armv7l.rpm [ 300s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debugsource-0.1.60-1.2.armv7l.rpm [ 300s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.hCIH53 [ 300s] + umask 022 [ 300s] + cd /home/abuild/rpmbuild/BUILD [ 300s] + cd xorg-x11-drv-gesture-0.1.60 [ 300s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.60-1.2.arm [ 300s] + exit 0 [ 300s] ... checking for files with abuild user/group [ 300s] ... creating baselibs [ 301s] ... comparing built packages with the former built [ 301s] /usr/lib/build/rpm-check.sh [ 301s] compare /.build.oldpackages/xorg-x11-drv-gesture-0.1.60-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/xorg-x11-drv-gesture-0.1.60-1.2.src.rpm [ 301s] compare /.build.oldpackages/xorg-x11-drv-gesture-0.1.60-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-0.1.60-1.2.armv7l.rpm [ 303s] /usr/lib/xorg/modules/input/gesture_drv.so differs in ELF sections [ 303s] --- /tmp/tmp.JF8jGRz83j 2016-05-30 17:07:18.730384856 +0000 [ 303s] +++ /tmp/tmp.mxUtF7pxoL 2016-05-30 17:07:18.846384857 +0000 [ 303s] @@ -3,8 +3,8 @@ [ 303s] [ 303s] Contents of section .note.gnu.build-id: [ 303s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 303s] - 0104 82d74468 06daac33 1e25e53e 40a3c2cb ..Dh...3.%.>@... [ 303s] - 0114 a6b9a2fe .... [ 303s] + 0104 d128b748 97c2671d 2f414f35 dac7e8a0 .(.H..g./AO5.... [ 303s] + 0114 c76ae9ff .j.. [ 303s] Contents of section .hash: [ 303s] 0118 43000000 57000000 00000000 48000000 C...W.......H... [ 303s] 0128 00000000 2e000000 31000000 00000000 ........1....... [ 303s] @@ -2529,4 +2529,4 @@ [ 303s] 0030 0222012c 01 .".,. [ 303s] Contents of section .gnu_debuglink: [ 303s] 0000 67657374 7572655f 6472762e 736f2e64 gesture_drv.so.d [ 303s] - 0010 65627567 00000000 e285b596 ebug........ [ 303s] + 0010 65627567 00000000 fa28af59 ebug.....(.Y [ 303s] compare /.build.oldpackages/xorg-x11-drv-gesture-debuginfo-0.1.60-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debuginfo-0.1.60-1.2.armv7l.rpm [ 303s] --- /tmp/tmp.nQQ7vjawzi 2016-05-30 17:07:19.466384860 +0000 [ 303s] +++ /tmp/tmp.Yat5JawosT 2016-05-30 17:07:19.482384860 +0000 [ 303s] @@ -1,8 +1,8 @@ [ 303s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 303s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 303s] -/usr/lib/debug/.build-id/82/ 0 (none) 40755 root root 0 4294967295 [ 303s] -/usr/lib/debug/.build-id/82/d7446806daac331e25e53e40a3c2cba6b9a2fe 0 (none) 120777 root root 0 4294967295 ../../../xorg/modules/input/gesture_drv.so [ 303s] -/usr/lib/debug/.build-id/82/d7446806daac331e25e53e40a3c2cba6b9a2fe.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/xorg/modules/input/gesture_drv.so.debug [ 303s] +/usr/lib/debug/.build-id/d1/ 0 (none) 40755 root root 0 4294967295 [ 303s] +/usr/lib/debug/.build-id/d1/28b74897c2671d2f414f35dac7e8a0c76ae9ff 0 (none) 120777 root root 0 4294967295 ../../../xorg/modules/input/gesture_drv.so [ 303s] +/usr/lib/debug/.build-id/d1/28b74897c2671d2f414f35dac7e8a0c76ae9ff.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/xorg/modules/input/gesture_drv.so.debug [ 303s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 303s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 303s] /usr/lib/debug/usr/lib/xorg/ 0 (none) 40755 root root 0 4294967295 [ 304s] RPM meta information is different [ 304s] compare /.build.oldpackages/xorg-x11-drv-gesture-debugsource-0.1.60-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debugsource-0.1.60-1.2.armv7l.rpm [ 304s] compare /.build.oldpackages/xorg-x11-drv-gesture-devel-0.1.60-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-devel-0.1.60-1.2.armv7l.rpm [ 305s] ... saving built statistics [ 305s] /.build/build: line 3148: mount: command not found [ 305s] ERROR: no root disk device found, yet another new device name? [ 305s] ls: cannot access /sys/block/: No such file or directory [ 305s] /.build/build: line 3163: umount: command not found [ 305s] ... saving built packages [ 305s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-0.1.60-1.2.armv7l.rpm [ 305s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debuginfo-0.1.60-1.2.armv7l.rpm [ 305s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debugsource-0.1.60-1.2.armv7l.rpm [ 306s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-devel-0.1.60-1.2.armv7l.rpm [ 306s] /home/abuild/rpmbuild/SRPMS/xorg-x11-drv-gesture-0.1.60-1.2.src.rpm [ 306s] /home/abuild/rpmbuild/OTHER/_statistics [ 306s] [ 306s] w21 finished "build xorg-x11-drv-gesture.spec" at Mon May 30 17:07:22 UTC 2016. [ 306s] [ 310s] [ 292.687906] SysRq : Power Off [ 310s] [ 292.800235] Power down. [ 310s] build: extracting built packages... [ 310s] xorg-x11-drv-gesture-0.1.60-1.2.armv7l.rpm [ 310s] xorg-x11-drv-gesture-debuginfo-0.1.60-1.2.armv7l.rpm [ 310s] xorg-x11-drv-gesture-debugsource-0.1.60-1.2.armv7l.rpm [ 310s] xorg-x11-drv-gesture-devel-0.1.60-1.2.armv7l.rpm [ 310s] xorg-x11-drv-gesture-0.1.60-1.2.src.rpm [ 310s] _statistics