[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:xorg-x11-xinit.spec" at Mon May 30 16:37:33 UTC 2016. [ 0s] [ 0s] Building xorg-x11-xinit for project 'Tizen:2.3.1:Mobile' repository 'target' arch 'armv7l' srcmd5 'b590457113cc579aaf2b118e4881f3c1' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-xinit.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-xinit.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-xinit.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 11s] booting kvm ... [ 11s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 10000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 4712/2392064 files, 237979/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] switching personality to 8... [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] /.build/build: line 770: mount: command not found [ 17s] swapon on /dev/vdb [ 17s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 17s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 17s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 17s] logging output to //.build.log... [ 17s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-xinit.spec ... [ 17s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-xinit.spec build rpmlint-Factory ... [ 18s] running rpm-x86-arm postinstall script [ 18s] running rpm-libs-x86-arm postinstall script [ 18s] running tizen-accelerator postinstall script [ 18s] running bash-x86-arm postinstall script [ 18s] initializing rpm db... [ 22s] [1/155] installing cross-armv7l-platformfile-0.0.1-1.1 [ 23s] [2/155] installing kernel-headers-linux-3.0-3.0.101-1.4 [ 23s] [3/155] installing libX11-common-1.5.0-1.6 [ 24s] [4/155] installing tizen-release-2.2.0-1.1 [ 25s] [5/155] installing tzdata-2014j-1.1 [ 26s] [6/155] installing libgcc-4.6.4-1.14 [ 26s] [7/155] installing setup-0.1-1.1 [ 27s] [8/155] installing filesystem-0.1-1.1 [ 38s] warning: group lock does not exist - using root [ 38s] [9/155] installing eglibc-2.13-3.10 [ 40s] [10/155] installing libstdc++-4.6.4-1.14 [ 40s] [11/155] installing eglibc-common-2.13-3.10 [ 42s] [12/155] installing libstdc++-devel-4.6.4-1.14 [ 42s] [13/155] installing bash-4.1-1.2 [ 43s] [14/155] installing bzip2-libs-1.0.5-1.2 [ 43s] [15/155] installing cpio-2.8-1.2 [ 43s] [16/155] installing diffutils-3.0-1.2 [ 44s] [17/155] installing e2fsprogs-libs-1.41.9-1.6 [ 45s] [18/155] installing elfutils-libelf-0.152-1.16 [ 45s] [19/155] installing expat-2.0.1-1.1 [ 45s] [20/155] installing fdupes-1.40-1.1 [ 46s] [21/155] installing findutils-4.2.31-1.2 [ 46s] [22/155] installing gdbm-1.8.3-1.1 [ 46s] [23/155] installing libXau-1.0.7-1.1 [ 46s] [24/155] installing libattr-2.4.44-1.4 [ 47s] [25/155] installing libgomp-4.6.4-1.14 [ 48s] [26/155] installing liblua-5.1.4-1.2 [ 48s] [27/155] installing libuuid-2.20.2-1.2 [ 48s] [28/155] installing lzo-2.03-1.1 [ 49s] [29/155] installing m4-1.4.14-1.2 [ 49s] [30/155] installing net-tools-1.60-1.5 [ 50s] [31/155] installing nspr-4.9-1.17 [ 50s] [32/155] installing nss-softokn-freebl-3.12.9-1.24 [ 51s] [33/155] installing patch-2.6-1.2 [ 51s] [34/155] installing pkg-config-0.25-1.2 [ 52s] [35/155] installing popt-1.16-1.1 [ 53s] [36/155] installing readline-5.2-1.2 [ 54s] [37/155] installing sed-4.1.5-1.1 [ 54s] [38/155] installing smack-1.0+s14-1.2 [ 54s] [39/155] installing sqlite-3.7.13-1.2 [ 55s] [40/155] installing tar-1.17-1.2 [ 55s] [41/155] installing xz-libs-5.0.3-1.2 [ 55s] [42/155] installing zlib-1.2.5-1.17 [ 55s] [43/155] installing gmp-4.2.1-1.1 [ 56s] [44/155] installing libpcre-7.7-1.2 [ 56s] [45/155] installing ncurses-libs-5.7-1.2 [ 56s] [46/155] installing build-compare-2009.10.14-1.12 [ 56s] [47/155] installing libpthread-stubs-0.3-1.1 [ 56s] [48/155] installing qemu.x86_64-1.2-1.1 [ 60s] [49/155] installing xorg-x11-proto-core-7.0.25-1.1 [ 60s] [50/155] installing xorg-x11-proto-kb-1.0.6-1.1 [ 60s] [51/155] installing xorg-x11-xutils-dev-7.7-1.1 [ 60s] [52/155] installing eglibc-headers-2.13-3.10 [ 61s] [53/155] installing libcap-2.21-1.2 [ 61s] [54/155] installing unzip-6.0-1.15 [ 61s] [55/155] installing zlib-devel-1.2.5-1.17 [ 61s] [56/155] installing grep-2.5.1a-1.1 [ 61s] [57/155] installing libacl-2.2.49-1.2 [ 61s] [58/155] installing libfile-5.04-1.1 [ 62s] [59/155] installing libxcb-1.8.1-1.1 [ 62s] [60/155] installing lzo-minilzo-2.03-1.1 [ 62s] [61/155] installing make-3.82-1.2 [ 62s] [62/155] installing mpfr-3.0.0-1.1 [ 62s] [63/155] installing ncurses-5.7-1.2 [ 62s] [64/155] installing bzip2-1.0.5-1.2 [ 63s] [65/155] installing libblkid-2.20.2-1.2 [ 63s] [66/155] installing xz-5.0.3-1.2 [ 63s] [67/155] installing binutils-2.22-1.9 [ 63s] [68/155] installing elfutils-libs-0.152-1.16 [ 63s] [69/155] installing nss-3.12.9-1.24 [ 64s] [70/155] installing perl-5.12.1-1.10 [ 66s] [71/155] installing ncurses-base-5.7-1.2 [ 66s] [72/155] installing perl-HTML-Tagset-3.20-1.1 [ 66s] [73/155] installing perl-IO-Compress-Base-2.008-1.10 [ 66s] [74/155] installing perl-Module-Pluggable-3.60-1.10 [ 66s] [75/155] installing perl-Pod-Escapes-1.04-1.10 [ 66s] [76/155] installing perl-TimeDate-1.20-1.1 [ 67s] [77/155] installing eglibc-devel-2.13-3.10 [ 67s] [78/155] installing file-5.04-1.1 [ 67s] [79/155] installing libXau-devel-1.0.7-1.1 [ 67s] [80/155] installing lzo-devel-2.03-1.1 [ 67s] [81/155] installing perl-Compress-Raw-Zlib-2.008-1.10 [ 67s] [82/155] installing perl-devel-5.12.1-1.10 [ 68s] [83/155] installing perl-libs-5.12.1-1.10 [ 69s] [84/155] installing coreutils-6.9-1.14 [ 69s] [85/155] installing libX11-1.5.0-1.6 [ 69s] [86/155] installing libmount-2.20.2-1.2 [ 70s] [87/155] installing mpc-0.9-1.1 [ 70s] [88/155] installing xz-lzma-compat-5.0.3-1.2 [ 70s] [89/155] installing elfutils-0.152-1.16 [ 70s] [90/155] installing nss-sysinit-3.12.9-1.24 [ 70s] [91/155] installing rpm-libs-4.9.1-1.2 [ 70s] [92/155] installing perl-ExtUtils-ParseXS-2.18-1.10 [ 70s] [93/155] installing perl-Pod-Simple-3.07-1.10 [ 71s] [94/155] installing perl-Test-Simple-0.80-1.10 [ 71s] [95/155] installing tizen-accelerator-1.0.1-1.1 [ 71s] [96/155] installing perl-IO-Compress-Zlib-2.008-1.10 [ 72s] [97/155] installing perl-Test-Harness-3.12-1.10 [ 72s] [98/155] installing gawk-3.1.5-1.7 [ 73s] [99/155] installing gzip-1.3.12-1.2 [ 73s] [100/155] installing libxcb-devel-1.8.1-1.1 [ 74s] [101/155] installing build-2011.01.10a-1.1 [ 74s] [102/155] installing rpm-4.9.1-1.2 [ 74s] [103/155] installing cpp-4.6.4-1.14 [ 75s] [104/155] installing dbus-1.6.4-1.2 [ 76s] [105/155] installing util-linux-2.20.2-1.2 [ 77s] [106/155] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 77s] [107/155] installing dbus-libs-1.6.4-1.2 [ 77s] [108/155] installing eglibc-x86-arm-2.13-1.5 [ 79s] [109/155] installing elfutils-libelf-x86-arm-0.152-2.1 [ 79s] [110/155] installing elfutils-libs-x86-arm-0.152-2.4 [ 79s] [111/155] installing gmp-x86-arm-4.2.1-2.1 [ 79s] [112/155] installing libacl-x86-arm-2.2.49-2.2 [ 80s] [113/155] installing libattr-x86-arm-2.4.44-2.1 [ 80s] [114/155] installing libcap-x86-arm-2.21-2.2 [ 80s] [115/155] installing libfile-x86-arm-5.04-2.1 [ 80s] [116/155] installing libgcc-x86-arm-4.6.4-2.2 [ 80s] [117/155] installing liblua-x86-arm-5.1.4-2.1 [ 81s] [118/155] installing mpc-x86-arm-0.9-2.1 [ 81s] [119/155] installing mpfr-x86-arm-3.0.0-2.1 [ 81s] [120/155] installing ncurses-libs-x86-arm-5.7-2.1 [ 81s] [121/155] installing nspr-x86-arm-4.9-2.4 [ 81s] [122/155] installing nss-softokn-freebl-x86-arm-3.12.9-2.4 [ 82s] [123/155] installing nss-x86-arm-3.12.9-2.4 [ 82s] [124/155] installing perl-ExtUtils-MakeMaker-6.36-1.10 [ 82s] [125/155] installing popt-x86-arm-1.16-2.1 [ 82s] [126/155] installing rpm-libs-x86-arm-4.9.1-2.2 [ 83s] [127/155] installing sqlite-x86-arm-3.7.13-2.2 [ 83s] [128/155] installing xz-libs-x86-arm-5.0.3-2.1 [ 83s] [129/155] installing zlib-x86-arm-1.2.5-2.1 [ 84s] [130/155] installing libX11-devel-1.5.0-1.6 [ 84s] [131/155] installing gcc-4.6.4-1.14 [ 85s] [132/155] installing rpm-build-4.9.1-1.2 [ 85s] [133/155] installing dbus-devel-1.6.4-1.2 [ 85s] [134/155] installing perl-CPAN-1.9205-1.10 [ 85s] [135/155] installing bash-x86-arm-4.1-2.2 [ 86s] [136/155] installing fdupes-x86-arm-1.40-2.1 [ 86s] [137/155] installing findutils-x86-arm-4.2.31-2.2 [ 86s] [138/155] installing gawk-x86-arm-3.1.5-2.2 [ 86s] [139/155] installing gzip-x86-arm-1.3.12-2.1 [ 86s] [140/155] installing make-x86-arm-3.82-2.2 [ 87s] [141/155] installing sed-x86-arm-4.1.5-2.1 [ 87s] [142/155] installing tar-x86-arm-1.17-2.2 [ 87s] [143/155] installing diffutils-x86-arm-3.0-2.2 [ 88s] [144/155] installing patch-x86-arm-2.6-2.1 [ 88s] [145/155] installing autoconf-2.68-1.1 [ 88s] [146/155] installing coreutils-x86-arm-6.9-2.2 [ 90s] [147/155] installing file-x86-arm-5.04-2.1 [ 91s] [148/155] installing elfutils-x86-arm-0.152-2.4 [ 91s] [149/155] installing gcc-c++-4.6.4-1.14 [ 91s] [150/155] installing rpm-x86-arm-4.9.1-2.1 [ 92s] /bin/rpm.orig-arm already present - skipping. [ 92s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 92s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 92s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 92s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 92s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 92s] [151/155] installing rpm-build-x86-arm-4.9.1-2.2 [ 92s] [152/155] installing automake-1.11.1-1.1 [ 92s] [153/155] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1 [ 94s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 94s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 94s] [154/155] installing libtool-2.2.6b-1.1 [ 94s] [155/155] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 95s] removing nis flags from //etc/nsswitch.conf... [ 95s] now finalizing build dir... [ 95s] /.build/build: line 2589: mount: command not found [ 95s] /.build/build: line 2590: mount: command not found [ 98s] build target is armv7l-tizen-linux [ 98s] ----------------------------------------------------------------- [ 98s] I have the following modifications for xorg-x11-xinit.spec: [ 98s] 7c7 [ 98s] < Release: 5 [ 98s] --- [ 98s] > Release: 1.2 [ 98s] ----------------------------------------------------------------- [ 98s] ----- building xorg-x11-xinit.spec (user abuild) [ 98s] ----------------------------------------------------------------- [ 98s] ----------------------------------------------------------------- [ 98s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Mobile/target/b590457113cc579aaf2b118e4881f3c1-xorg-x11-xinit' /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit.spec [ 98s] Building target platforms: armv7l-tizen-linux [ 98s] Building for target armv7l-tizen-linux [ 98s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.7iYrQg [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + LANG=C [ 98s] + export LANG [ 98s] + unset DISPLAY [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + rm -rf xorg-x11-xinit-1.4.6 [ 98s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-xinit-1.4.6.tar.gz [ 98s] + /bin/tar -xf - [ 98s] + STATUS=0 [ 98s] + '[' 0 -ne 0 ']' [ 98s] + cd xorg-x11-xinit-1.4.6 [ 98s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 98s] + exit 0 [ 98s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.PpSb1M [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd xorg-x11-xinit-1.4.6 [ 98s] + LANG=C [ 98s] + export LANG [ 98s] + unset DISPLAY [ 98s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 98s] + export CFLAGS [ 98s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 98s] + export CXXFLAGS [ 98s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 98s] + export FFLAGS [ 98s] + LD_AS_NEEDED=1 [ 98s] + export LD_AS_NEEDED [ 98s] + autoreconf [ 132s] + ./configure --prefix=/usr 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -g -D_F_EXIT_AFTER_XORG_AND_XCLIENT_LAUNCHED_ -D_F_LAUNCH_WM_AFTER_LAUNCHING_SERVER_ -D_F_SET_DELAY_TIME_TO_WAIT_SERVER_ ' [ 133s] checking for a BSD-compatible install... /usr/bin/install -c [ 134s] checking whether build environment is sane... yes [ 134s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 134s] checking for gawk... gawk [ 134s] checking whether make sets $(MAKE)... yes [ 134s] checking whether to enable maintainer-specific portions of Makefiles... no [ 134s] checking for style of include used by make... GNU [ 134s] checking for gcc... gcc [ 134s] checking whether the C compiler works... yes [ 134s] checking for C compiler default output file name... a.out [ 134s] checking for suffix of executables... [ 134s] checking whether we are cross compiling... no [ 134s] checking for suffix of object files... o [ 134s] checking whether we are using the GNU C compiler... yes [ 134s] checking whether gcc accepts -g... yes [ 134s] checking for gcc option to accept ISO C89... none needed [ 134s] checking dependency style of gcc... gcc3 [ 134s] checking for gcc option to accept ISO C99... -std=gnu99 [ 134s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 134s] checking for grep that handles long lines and -e... /bin/grep [ 134s] checking for egrep... /bin/grep -E [ 134s] checking for ANSI C header files... yes [ 134s] checking for sys/types.h... yes [ 134s] checking for sys/stat.h... yes [ 134s] checking for stdlib.h... yes [ 134s] checking for string.h... yes [ 134s] checking for memory.h... yes [ 134s] checking for strings.h... yes [ 134s] checking for inttypes.h... yes [ 134s] checking for stdint.h... yes [ 134s] checking for unistd.h... yes [ 134s] checking whether __clang__ is declared... no [ 135s] checking whether __INTEL_COMPILER is declared... no [ 135s] checking whether __SUNPRO_C is declared... no [ 135s] checking for pkg-config... /usr/bin/pkg-config [ 135s] checking pkg-config is at least version 0.9.0... yes [ 135s] checking build system type... armv7l-unknown-linux-gnu [ 135s] checking host system type... armv7l-unknown-linux-gnu [ 135s] checking for a sed that does not truncate output... /bin/sed [ 135s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 135s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 135s] checking if gcc -std=gnu99 supports-Wall... yes [ 135s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 135s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 135s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 135s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 135s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 135s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 135s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 135s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 135s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 135s] checking if gcc -std=gnu99 supports-Wunused... yes [ 135s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 135s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 135s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 135s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 135s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 135s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 135s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 136s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 136s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 136s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 136s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 136s] checking if gcc -std=gnu99 supports-pedantic... yes [ 136s] checking if gcc -std=gnu99 supports-Werror... yes [ 136s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 136s] checking for cpp... /usr/bin/cpp [ 136s] checking if /usr/bin/cpp requires -undef... yes [ 136s] checking if /usr/bin/cpp requires -traditional... yes [ 136s] checking for launchd... no [ 136s] checking for XINIT... yes [ 136s] checking for mcookie... /usr/bin/mcookie [ 136s] configure: creating ./config.status [ 136s] config.status: creating Makefile [ 136s] config.status: creating man/Makefile [ 136s] config.status: creating launchd/Makefile [ 136s] config.status: creating launchd/privileged_startx/Makefile [ 136s] config.status: creating launchd/user_startx/Makefile [ 136s] config.status: creating config.h [ 136s] config.status: executing depfiles commands [ 136s] + make -j4 XINITDIR=/etc/X11/xinit [ 136s] make all-recursive [ 136s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 136s] Making all in man [ 136s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 136s] GEN startx.1 [ 136s] GEN xinit.1 [ 136s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 136s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 136s] CC xinit.o [ 136s] GEN startx [ 136s] GEN xinitrc [ 136s] xinit.c:94:31: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:95:32: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:96:1: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:121:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 136s] xinit.c: In function 'Execute': [ 136s] xinit.c:152:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c: In function 'waitforserver': [ 136s] xinit.c:371:13: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:118:13: note: expected 'char *' but argument is of type 'const char *' [ 136s] xinit.c: In function 'startServer': [ 136s] xinit.c:421:19: warning: declaration of 'server' shadows a global declaration [-Wshadow] [ 136s] xinit.c:103:15: warning: shadowed declaration is here [-Wshadow] [ 136s] xinit.c:480:9: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 136s] xinit.c: At top level: [ 136s] xinit.c:511:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 136s] xinit.c: In function 'set_wm_user_groups': [ 136s] xinit.c:511:1: warning: old-style function definition [-Wold-style-definition] [ 136s] xinit.c:518:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 136s] xinit.c:523:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 136s] xinit.c:552:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 136s] xinit.c:556:2: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 136s] xinit.c: In function 'startClient': [ 136s] xinit.c:691:19: warning: declaration of 'client' shadows a global declaration [-Wshadow] [ 136s] xinit.c:104:15: warning: shadowed declaration is here [-Wshadow] [ 136s] xinit.c: In function 'shutdown': [ 136s] xinit.c:750:5: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 136s] xinit.c:761:5: warning: passing argument 2 of 'processTimeout' discards 'const' qualifier from pointer target type [enabled by default] [ 136s] xinit.c:385:1: note: expected 'char *' but argument is of type 'const char *' [ 136s] xinit.c: In function 'verror': [ 136s] xinit.c:776:5: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 136s] xinit.c: In function 'verrorx': [ 136s] xinit.c:784:5: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 137s] CCLD xinit [ 137s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] + exit 0 [ 137s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sNPgFR [ 137s] + umask 022 [ 137s] + cd /home/abuild/rpmbuild/BUILD [ 137s] + cd xorg-x11-xinit-1.4.6 [ 137s] + LANG=C [ 137s] + export LANG [ 137s] + unset DISPLAY [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/license [ 137s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/license/xorg-x11-xinit [ 137s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] Making install in man [ 137s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 137s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 137s] make[2]: Nothing to be done for `install-exec-am'. [ 137s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/man/man1" [ 137s] /usr/bin/install -c -m 644 startx.1 xinit.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/man/man1' [ 137s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 137s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6/man' [ 137s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/bin" [ 137s] /usr/bin/install -c xinit '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/bin' [ 137s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/bin" [ 137s] /usr/bin/install -c startx '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/bin' [ 137s] test -z "/usr/lib/X11/xinit" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/lib/X11/xinit" [ 137s] /usr/bin/install -c -m 644 xinitrc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/lib/X11/xinit' [ 137s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6' [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/info [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/doc [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/doc/xorg-x11-xinit [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/gtk-doc [ 137s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/share/man [ 137s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm -regex '.*/man/man./.*.[0-9]' [ 137s] + xargs rm -f -- [ 137s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm -regex '.*/man/../man./.*.[0-9]' [ 137s] + xargs rm -f -- [ 137s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 137s] + xargs rm -f -- [ 137s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-xinit-1.4.6 [ 137s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm/usr/bin/xinit [ 137s] 40 blocks [ 137s] + /usr/lib/rpm/check-buildroot [ 137s] + /usr/lib/rpm//brp-compress [ 137s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 137s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 137s] + /usr/lib/rpm/brp-python-hardlink [ 137s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] Processing files: xorg-x11-xinit-1.4.6-1.2.armv7l [ 137s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJ4b3JnIi8+Cgk8 [ 137s] L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 137s] [ 137s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 137s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 137s] Processing files: xorg-x11-xinit-debuginfo-1.4.6-1.2.armv7l [ 137s] Processing files: xorg-x11-xinit-debugsource-1.4.6-1.2.armv7l [ 137s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] warning: Installed (but unpackaged) file(s) found: [ 137s] /usr/bin/startx [ 137s] /usr/lib/X11/xinit/xinitrc [ 137s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.4.6-1.2.src.rpm [ 137s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.4.6-1.2.armv7l.rpm [ 137s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.4.6-1.2.armv7l.rpm [ 137s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.4.6-1.2.armv7l.rpm [ 137s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.rkXU7k [ 137s] + umask 022 [ 137s] + cd /home/abuild/rpmbuild/BUILD [ 137s] + cd xorg-x11-xinit-1.4.6 [ 137s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-xinit-1.4.6-1.2.arm [ 137s] + exit 0 [ 137s] ... checking for files with abuild user/group [ 137s] ... creating baselibs [ 138s] ... comparing built packages with the former built [ 138s] /usr/lib/build/rpm-check.sh [ 138s] compare /.build.oldpackages/xorg-x11-xinit-1.4.6-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.4.6-1.2.src.rpm [ 138s] compare /.build.oldpackages/xorg-x11-xinit-1.4.6-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.4.6-1.2.armv7l.rpm [ 139s] /usr/bin/xinit differs in ELF sections [ 139s] --- /tmp/tmp.fETcxRipsX 2016-05-30 16:39:50.914707547 +0000 [ 139s] +++ /tmp/tmp.0HrPcJk1aK 2016-05-30 16:39:50.918707547 +0000 [ 139s] @@ -9,8 +9,8 @@ [ 139s] 0158 00000000 02000000 06000000 19000000 ................ [ 139s] Contents of section .note.gnu.build-id: [ 139s] 0168 04000000 14000000 03000000 474e5500 ............GNU. [ 139s] - 0178 24c713cd 8d970b97 0f260ca9 93b23f05 $........&....?. [ 139s] - 0188 78baf640 x..@ [ 139s] + 0178 cd49bca1 f6fbc6b4 a4b6eee9 9e80cfdc .I.............. [ 139s] + 0188 aa6e397e .n9~ [ 139s] Contents of section .hash: [ 139s] 018c 43000000 4d000000 00000000 46000000 C...M.......F... [ 139s] 019c 00000000 00000000 1e000000 3c000000 ............<... [ 139s] @@ -733,4 +733,4 @@ [ 139s] 0020 04140115 01170318 0119011a 021b0322 ..............." [ 139s] 0030 012c01 .,. [ 139s] Contents of section .gnu_debuglink: [ 139s] - 0000 78696e69 742e6465 62756700 2d5b7b91 xinit.debug.-[{. [ 139s] + 0000 78696e69 742e6465 62756700 5a0db804 xinit.debug.Z... [ 139s] compare /.build.oldpackages/xorg-x11-xinit-debuginfo-1.4.6-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.4.6-1.2.armv7l.rpm [ 139s] --- /tmp/tmp.gF6F4JhBKr 2016-05-30 16:39:51.074707540 +0000 [ 139s] +++ /tmp/tmp.BMEsrMMseh 2016-05-30 16:39:51.086707540 +0000 [ 139s] @@ -1,8 +1,8 @@ [ 139s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 139s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 139s] -/usr/lib/debug/.build-id/24/ 0 (none) 40755 root root 0 4294967295 [ 139s] -/usr/lib/debug/.build-id/24/c713cd8d970b970f260ca993b23f0578baf640 0 (none) 120777 root root 0 4294967295 ../../../../bin/xinit [ 139s] -/usr/lib/debug/.build-id/24/c713cd8d970b970f260ca993b23f0578baf640.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/xinit.debug [ 139s] +/usr/lib/debug/.build-id/cd/ 0 (none) 40755 root root 0 4294967295 [ 139s] +/usr/lib/debug/.build-id/cd/49bca1f6fbc6b4a4b6eee99e80cfdcaa6e397e 0 (none) 120777 root root 0 4294967295 ../../../../bin/xinit [ 139s] +/usr/lib/debug/.build-id/cd/49bca1f6fbc6b4a4b6eee99e80cfdcaa6e397e.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/xinit.debug [ 139s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 139s] /usr/lib/debug/usr/bin/ 0 (none) 40755 root root 0 4294967295 [ 139s] /usr/lib/debug/usr/bin/xinit.debug 0 (none) 100755 root root 0 4294967295 [ 139s] RPM meta information is different [ 139s] compare /.build.oldpackages/xorg-x11-xinit-debugsource-1.4.6-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.4.6-1.2.armv7l.rpm [ 139s] ... saving built statistics [ 139s] /.build/build: line 3148: mount: command not found [ 139s] ERROR: no root disk device found, yet another new device name? [ 139s] ls: cannot access /sys/block/: No such file or directory [ 139s] /.build/build: line 3163: umount: command not found [ 139s] ... saving built packages [ 139s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-1.4.6-1.2.armv7l.rpm [ 139s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debuginfo-1.4.6-1.2.armv7l.rpm [ 139s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-xinit-debugsource-1.4.6-1.2.armv7l.rpm [ 139s] /home/abuild/rpmbuild/SRPMS/xorg-x11-xinit-1.4.6-1.2.src.rpm [ 139s] /home/abuild/rpmbuild/OTHER/_statistics [ 139s] [ 139s] w15 finished "build xorg-x11-xinit.spec" at Mon May 30 16:39:51 UTC 2016. [ 139s] [ 142s] [ 128.527290] SysRq : Power Off [ 142s] [ 128.636372] Power down. [ 142s] build: extracting built packages... [ 142s] xorg-x11-xinit-1.4.6-1.2.armv7l.rpm [ 142s] xorg-x11-xinit-debuginfo-1.4.6-1.2.armv7l.rpm [ 142s] xorg-x11-xinit-debugsource-1.4.6-1.2.armv7l.rpm [ 142s] xorg-x11-xinit-1.4.6-1.2.src.rpm [ 142s] _statistics