[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w18 started "build _service:gbs:fdupes-x86.spec" at Mon Sep 21 02:42:45 UTC 2015. [ 0s] [ 0s] Building fdupes-x64 for project 'Tizen:2.3.1:Mobile' repository 'target' arch 'i586' srcmd5 '044e8a358e0bbd1d89f1f0425d9b2d1b' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:fdupes-x86.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:fdupes-x86.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:fdupes-x86.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4059/2392064 files, 187677/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:fdupes-x86.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:fdupes-x86.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 6s] [1/102] installing cloog-0.16.1-1.1 [ 6s] [2/102] installing emulator-kernel-user-headers-3.12.18-1.2 [ 7s] [3/102] installing tizen-release-2.2.0-1.1 [ 7s] [4/102] installing tzdata-2014j-1.1 [ 7s] [5/102] installing libgcc-4.6.4-1.2 [ 7s] [6/102] installing setup-0.1-1.1 [ 7s] [7/102] installing filesystem-0.1-1.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/102] installing eglibc-2.13-1.6 [ 7s] [9/102] installing libstdc++-4.6.4-1.2 [ 7s] [10/102] installing bzip2-libs-1.0.5-1.1 [ 7s] [11/102] installing cpio-2.8-1.1 [ 7s] [12/102] installing e2fsprogs-libs-1.41.9-1.3 [ 7s] [13/102] installing elfutils-libelf-0.152-1.10 [ 7s] [14/102] installing fdupes-1.40-1.1 [ 7s] [15/102] installing findutils-4.2.31-1.1 [ 7s] [16/102] installing gdbm-1.8.3-1.1 [ 7s] [17/102] installing libattr-2.4.44-1.3 [ 7s] [18/102] installing liblua-5.1.4-1.1 [ 7s] [19/102] installing libstdc++-devel-4.6.4-1.2 [ 8s] [20/102] installing libuuid-2.20.2-1.1 [ 8s] [21/102] installing lzo-2.03-1.1 [ 8s] [22/102] installing m4-1.4.14-1.1 [ 8s] [23/102] installing net-tools-1.60-1.1 [ 8s] [24/102] installing nspr-4.9-1.5 [ 8s] [25/102] installing nss-softokn-freebl-3.12.9-1.6 [ 8s] [26/102] installing pkg-config-0.25-1.1 [ 8s] [27/102] installing popt-1.16-1.1 [ 8s] [28/102] installing readline-5.2-1.1 [ 8s] [29/102] installing sed-4.1.5-1.1 [ 8s] [30/102] installing sqlite-3.7.13-1.1 [ 8s] [31/102] installing tar-1.17-1.1 [ 8s] [32/102] installing xz-libs-5.0.3-1.1 [ 8s] [33/102] installing zlib-1.2.5-1.5 [ 8s] [34/102] installing bash-4.1-1.1 [ 8s] [35/102] installing diffutils-3.0-1.1 [ 8s] [36/102] installing libgomp-4.6.4-1.2 [ 8s] [37/102] installing patch-2.6-1.1 [ 8s] [38/102] installing gmp-4.2.1-1.1 [ 8s] [39/102] installing libpcre-7.7-1.1 [ 8s] [40/102] installing ncurses-libs-5.7-1.1 [ 8s] [41/102] installing patchelf-0.5.svn20809-1.1 [ 8s] [42/102] installing build-compare-2009.10.14-1.3 [ 8s] [43/102] installing eglibc-headers-2.13-1.6 [ 8s] [44/102] installing grep-2.5.1a-1.1 [ 9s] [45/102] installing libacl-2.2.49-1.1 [ 9s] [46/102] installing libcap-2.21-1.1 [ 9s] [47/102] installing libfile-5.04-1.1 [ 9s] [48/102] installing lzo-minilzo-2.03-1.1 [ 9s] [49/102] installing make-3.82-1.1 [ 9s] [50/102] installing mpfr-3.0.0-1.1 [ 9s] [51/102] installing ncurses-5.7-1.1 [ 9s] [52/102] installing unzip-6.0-1.3 [ 9s] [53/102] installing zlib-devel-1.2.5-1.5 [ 9s] [54/102] installing bzip2-1.0.5-1.1 [ 9s] [55/102] installing libblkid-2.20.2-1.1 [ 9s] [56/102] installing xz-5.0.3-1.1 [ 9s] [57/102] installing binutils-2.22-1.5 [ 9s] [58/102] installing elfutils-libs-0.152-1.10 [ 9s] [59/102] installing ppl-0.11.2-1.1 [ 9s] [60/102] installing nss-3.12.9-1.6 [ 9s] [61/102] installing perl-5.12.1-1.3 [ 10s] [62/102] installing ncurses-base-5.7-1.1 [ 10s] [63/102] installing perl-HTML-Tagset-3.20-1.1 [ 10s] [64/102] installing perl-IO-Compress-Base-2.008-1.3 [ 10s] [65/102] installing perl-Module-Pluggable-3.60-1.3 [ 10s] [66/102] installing perl-Pod-Escapes-1.04-1.3 [ 10s] [67/102] installing perl-TimeDate-1.20-1.1 [ 10s] [68/102] installing eglibc-devel-2.13-1.6 [ 10s] [69/102] installing file-5.04-1.1 [ 10s] [70/102] installing perl-Compress-Raw-Zlib-2.008-1.3 [ 10s] [71/102] installing perl-libs-5.12.1-1.3 [ 10s] [72/102] installing coreutils-6.9-1.1 [ 11s] [73/102] installing libmount-2.20.2-1.1 [ 11s] [74/102] installing lzo-devel-2.03-1.1 [ 11s] [75/102] installing mpc-0.9-1.1 [ 11s] [76/102] installing perl-devel-5.12.1-1.3 [ 11s] [77/102] installing xz-lzma-compat-5.0.3-1.1 [ 11s] [78/102] installing cloog-ppl-0.16.1-1.1 [ 11s] [79/102] installing nss-sysinit-3.12.9-1.6 [ 11s] [80/102] installing ppl-pwl-0.11.2-1.1 [ 11s] [81/102] installing elfutils-0.152-1.10 [ 11s] [82/102] installing eglibc-common-2.13-1.6 [ 11s] [83/102] installing rpm-libs-4.9.1-1.1 [ 11s] [84/102] installing perl-ExtUtils-ParseXS-2.18-1.3 [ 11s] [85/102] installing perl-Pod-Simple-3.07-1.3 [ 11s] [86/102] installing perl-Test-Simple-0.80-1.3 [ 11s] [87/102] installing gawk-3.1.5-1.4 [ 11s] [88/102] installing gzip-1.3.12-1.1 [ 11s] [89/102] installing perl-IO-Compress-Zlib-2.008-1.3 [ 11s] [90/102] installing perl-Test-Harness-3.12-1.3 [ 11s] [91/102] installing rpm-4.9.1-1.1 [ 12s] [92/102] installing build-2011.01.10a-1.1 [ 12s] [93/102] installing util-linux-2.20.2-1.1 [ 12s] [94/102] installing cpp-4.6.4-1.2 [ 12s] [95/102] installing perl-ExtUtils-MakeMaker-6.36-1.3 [ 12s] [96/102] installing gcc-4.6.4-1.2 [ 12s] [97/102] installing rpm-build-4.9.1-1.1 [ 12s] [98/102] installing perl-CPAN-1.9205-1.3 [ 12s] [99/102] installing autoconf-2.68-1.1 [ 13s] [100/102] installing gcc-c++-4.6.4-1.2 [ 13s] [101/102] installing automake-1.11.1-1.1 [ 13s] [102/102] installing libtool-2.2.6b-1.1 [ 13s] removing nis flags from //etc/nsswitch.conf... [ 13s] now finalizing build dir... [ 13s] /.build/build: line 2585: mount: command not found [ 13s] /.build/build: line 2586: mount: command not found [ 13s] Warning: spec file parser line 73: can't expand %(...) [ 13s] Warning: spec file parser line 76: can't expand %(...) [ 13s] Warning: spec file parser line 79: can't expand %(...) [ 13s] Warning: spec file parser line 82: can't expand %(...) [ 13s] Warning: spec file parser line 111: can't expand %(...) [ 13s] Warning: spec file parser line 114: can't expand %(...) [ 13s] Warning: spec file parser line 117: can't expand %(...) [ 13s] Warning: spec file parser line 120: can't expand %(...) [ 13s] Warning: spec file parser line 129: can't expand %(...) [ 13s] Warning: spec file parser line 149: can't expand %(...) [ 13s] Warning: spec file parser line 193: can't expand %(...) [ 13s] Warning: spec file parser line 224: can't expand %(...) [ 13s] Warning: spec file parser line 232: can't expand %(...) [ 13s] Warning: spec file parser line 279: can't expand %(...) [ 13s] Warning: spec file parser line 299: can't expand %(...) [ 13s] Warning: spec file parser line 339: can't expand %(...) [ 13s] ----------------------------------------------------------------- [ 13s] I have the following modifications for fdupes-x86.spec: [ 13s] 61c61 [ 13s] < Release: %release_prefix [ 13s] --- [ 13s] > Release: 2.1 [ 13s] 341a342 [ 13s] > %changelog [ 13s] ----------------------------------------------------------------- [ 13s] ----- building fdupes-x86.spec (user abuild) [ 13s] ----------------------------------------------------------------- [ 13s] ----------------------------------------------------------------- [ 13s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Mobile/target/044e8a358e0bbd1d89f1f0425d9b2d1b-fdupes-x64' /home/abuild/rpmbuild/SOURCES/fdupes-x86.spec [ 13s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bOsPCE [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + exit 0 [ 13s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.JrdMBj [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 13s] + export CFLAGS [ 13s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 13s] + export CXXFLAGS [ 13s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 13s] + export FFLAGS [ 13s] + LD_AS_NEEDED=1 [ 13s] + export LD_AS_NEEDED [ 13s] + exit 0 [ 13s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.lUZdBY [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] + set +x [ 13s] tar: Removing leading `/' from member names [ 13s] [ 13s] [ .oO Preparing binaries Oo. ] [ 13s] [ 13s] Processing binary: /usr/bin/fdupes [ 13s] [ 13s] Creating baselibs_new.conf [ 13s] [ 13s] ################################################################################ [ 13s] [ 13s] [ 13s] REQUIREMENTS: [ 13s] CBinstall: "eglibc-x86-arm" [ 13s] CBinstall: "fdupes" [ 13s] CBinstall: "tizen-accelerator" [ 13s] Runscripts: fdupes-x86-arm [ 13s] [ 13s] [ 13s] ################################################################################ [ 13s] + /usr/lib/rpm/check-buildroot [ 13s] + /usr/lib/rpm//brp-compress [ 13s] + /usr/lib/rpm/brp-strip /bin/true [ 13s] + /usr/lib/rpm/brp-strip-static-archive /bin/true [ 13s] + /usr/lib/rpm/brp-strip-comment-note /bin/true /usr/bin/objdump [ 13s] + /usr/lib/rpm/brp-python-hardlink [ 13s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] Processing files: fdupes-x86-1.40-2.1.i586 [ 13s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] Wrote: /home/abuild/rpmbuild/SRPMS/fdupes-x86-1.40-2.1.src.rpm [ 13s] Wrote: /home/abuild/rpmbuild/RPMS/i586/fdupes-x86-1.40-2.1.i586.vanish.rpm [ 13s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.BzbUzZ [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/fdupes-x86-1.40-2.1.i386 [ 13s] + exit 0 [ 13s] ... checking for files with abuild user/group [ 14s] ... creating baselibs [ 14s] fdupes-x86(armv5tel:arm): writing specfile... [ 14s] fdupes-x86(armv5tel:arm): running build... [ 14s] fdupes-x86(armv6l:arm): writing specfile... [ 14s] fdupes-x86(armv6l:arm): running build... [ 15s] fdupes-x86(armv7hl:arm): writing specfile... [ 15s] fdupes-x86(armv7hl:arm): running build... [ 15s] fdupes-x86(armv7l:arm): writing specfile... [ 15s] fdupes-x86(armv7l:arm): running build... [ 15s] fdupes-x86(armv7nhl:arm): writing specfile... [ 15s] fdupes-x86(armv7nhl:arm): running build... [ 15s] ... comparing built packages with the former built [ 15s] /usr/lib/build/rpm-check.sh [ 15s] compare /.build.oldpackages/fdupes-x86-1.40-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/fdupes-x86-1.40-2.1.src.rpm [ 15s] --- /tmp/tmp.GzSk644rds 2015-09-21 02:42:59.444876080 +0000 [ 15s] +++ /tmp/tmp.aDVRzTIRe0 2015-09-21 02:42:59.456876080 +0000 [ 15s] @@ -11,7 +11,7 @@ [ 15s] Authors: [ 15s] -------- [ 15s] Adrian Lopez [ 15s] - tizen Tizen:2.3.1:Mobile / target obs://build.tizen.org/Tizen:2.3.1:Mobile/target/1d621b2573ebe295367eb0d379090a96-fdupes-x64 X11/MIT X11/MIT [ 15s] + tizen Tizen:2.3.1:Mobile / target obs://build.tizen.org/Tizen:2.3.1:Mobile/target/044e8a358e0bbd1d89f1f0425d9b2d1b-fdupes-x64 X11/MIT X11/MIT [ 15s] Productivity/Archiving/Compression (none) (none) (none) i586 [ 15s] (none) 4.9.1 (none) [ 15s] cpio gzip 9 [ 15s] ... saving built statistics [ 15s] /.build/build: line 3144: mount: command not found [ 15s] ERROR: no root disk device found, yet another new device name? [ 15s] ls: cannot access /sys/block/: No such file or directory [ 15s] /.build/build: line 3159: umount: command not found [ 15s] ... saving built packages [ 15s] /home/abuild/rpmbuild/RPMS/armv5tel/fdupes-x86-arm-1.40-2.1.armv5tel.rpm [ 15s] /home/abuild/rpmbuild/RPMS/armv6l/fdupes-x86-arm-1.40-2.1.armv6l.rpm [ 15s] /home/abuild/rpmbuild/RPMS/armv7hl/fdupes-x86-arm-1.40-2.1.armv7hl.rpm [ 15s] /home/abuild/rpmbuild/RPMS/armv7l/fdupes-x86-arm-1.40-2.1.armv7l.rpm [ 15s] /home/abuild/rpmbuild/RPMS/armv7nhl/fdupes-x86-arm-1.40-2.1.armv7nhl.rpm [ 15s] /home/abuild/rpmbuild/RPMS/i586/fdupes-x86-1.40-2.1.i586.vanish.rpm [ 15s] /home/abuild/rpmbuild/SRPMS/fdupes-x86-1.40-2.1.src.rpm [ 15s] /home/abuild/rpmbuild/OTHER/_statistics [ 15s] [ 15s] w18 finished "build fdupes-x86.spec" at Mon Sep 21 02:42:59 UTC 2015. [ 15s] [ 27s] [ 22.109184] SysRq : Power Off [ 27s] [ 22.116169] Power down. [ 27s] build: extracting built packages... [ 27s] fdupes-x86-arm-1.40-2.1.armv5tel.rpm [ 27s] fdupes-x86-arm-1.40-2.1.armv6l.rpm [ 27s] fdupes-x86-arm-1.40-2.1.armv7hl.rpm [ 27s] fdupes-x86-arm-1.40-2.1.armv7l.rpm [ 27s] fdupes-x86-arm-1.40-2.1.armv7nhl.rpm [ 27s] fdupes-x86-1.40-2.1.i586.vanish.rpm [ 27s] fdupes-x86-1.40-2.1.src.rpm [ 27s] _statistics Retried build at Thu Apr 14 02:00:27 2016 returned same result, skipped Retried build at Mon May 30 01:24:43 2016 returned same result, skipped Retried build at Mon May 30 02:47:12 2016 returned same result, skipped