[ 0s] Using BUILD_ROOT=/srv/build/root_9/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_9/root [ 0s] [ 0s] [ 0s] w11 started "build _service:gbs:xcb-proto.spec" at Thu Apr 14 09:04:17 UTC 2016. [ 0s] [ 0s] Building xcb-proto for project 'Tizen:2.3.1:Mobile' repository 'target' arch 'i586' srcmd5 'd238bfcad45b99dac1d79bf0b6cb8a05' [ 0s] [ 0s] processing specfile /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/9/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_9/.build.rpmlist /srv/build/root_9/.build-srcdir/_service:gbs:xcb-proto.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 0s] [11/31] preinstalling nspr... [ 0s] [12/31] preinstalling nss-softokn-freebl... [ 0s] [13/31] preinstalling popt... [ 0s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_9/root,if=virtio,cache=unsafe -drive file=/srv/build/root_9/root,if=ide,index=0,cache=unsafe -drive file=/srv/build/root_9/swap,if=virtio,cache=unsafe -smp 4 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 5s] Waiting for device /dev/vda to appear: ok [ 5s] fsck from util-linux 2.21.2 [ 5s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 5s] /dev/vda: clean, 4055/2392064 files, 189469/9568256 blocks [ 5s] fsck succeeded. Mounting root device read-write. [ 5s] Mounting root /dev/vda [ 5s] mount -o rw -t ext4 /dev/vda /root [ 5s] replacing /etc/mtab with symlink to /proc/self/mounts [ 5s] 2nd stage started in virtual machine [ 5s] machine type: x86_64 [ 5s] switching personality to 8... [ 5s] 2nd stage started in virtual machine [ 5s] machine type: i686 [ 5s] /.build/build: line 770: mount: command not found [ 5s] swapon on /dev/vdb [ 5s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 5s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 5s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 5s] logging output to //.build.log... [ 5s] processing specfile /.build-srcdir/_service:gbs:xcb-proto.spec ... [ 5s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xcb-proto.spec build rpmlint-Factory ... [ 5s] initializing rpm db... [ 5s] [1/103] installing cloog-0.16.1-1.1 [ 5s] [2/103] installing emulator-kernel-user-headers-3.12.18-1.3 [ 6s] [3/103] installing tizen-release-2.2.0-1.1 [ 6s] [4/103] installing tzdata-2014j-1.1 [ 6s] [5/103] installing libgcc-4.6.4-1.3 [ 6s] [6/103] installing setup-0.1-1.1 [ 6s] [7/103] installing filesystem-0.1-1.1 [ 6s] warning: group lock does not exist - using root [ 6s] [8/103] installing eglibc-2.13-2.1 [ 6s] [9/103] installing libstdc++-4.6.4-1.3 [ 6s] [10/103] installing bzip2-libs-1.0.5-1.1 [ 6s] [11/103] installing cpio-2.8-1.1 [ 6s] [12/103] installing e2fsprogs-libs-1.41.9-1.3 [ 6s] [13/103] installing elfutils-libelf-0.152-1.12 [ 6s] [14/103] installing findutils-4.2.31-1.1 [ 6s] [15/103] installing gdbm-1.8.3-1.1 [ 6s] [16/103] installing libattr-2.4.44-1.4 [ 6s] [17/103] installing liblua-5.1.4-1.1 [ 6s] [18/103] installing libstdc++-devel-4.6.4-1.3 [ 7s] [19/103] installing libuuid-2.20.2-1.1 [ 7s] [20/103] installing lzo-2.03-1.1 [ 7s] [21/103] installing m4-1.4.14-1.1 [ 7s] [22/103] installing net-tools-1.60-1.2 [ 7s] [23/103] installing nspr-4.9-1.6 [ 7s] [24/103] installing nss-softokn-freebl-3.12.9-1.8 [ 7s] [25/103] installing pkg-config-0.25-1.1 [ 7s] [26/103] installing popt-1.16-1.1 [ 7s] [27/103] installing readline-5.2-1.1 [ 7s] [28/103] installing sed-4.1.5-1.1 [ 7s] [29/103] installing sqlite-3.7.13-1.1 [ 7s] [30/103] installing tar-1.17-1.1 [ 7s] [31/103] installing xz-libs-5.0.3-1.1 [ 7s] [32/103] installing zlib-1.2.5-1.7 [ 7s] [33/103] installing bash-4.1-1.1 [ 7s] [34/103] installing diffutils-3.0-1.1 [ 7s] [35/103] installing libgomp-4.6.4-1.3 [ 7s] [36/103] installing patch-2.6-1.1 [ 7s] [37/103] installing gmp-4.2.1-1.1 [ 7s] [38/103] installing libpcre-7.7-1.1 [ 7s] [39/103] installing ncurses-libs-5.7-1.1 [ 7s] [40/103] installing build-compare-2009.10.14-1.4 [ 7s] [41/103] installing eglibc-headers-2.13-2.1 [ 7s] [42/103] installing grep-2.5.1a-1.1 [ 7s] [43/103] installing libacl-2.2.49-1.1 [ 7s] [44/103] installing libcap-2.21-1.1 [ 7s] [45/103] installing libfile-5.04-1.1 [ 7s] [46/103] installing libpython-2.7.1-1.5 [ 8s] [47/103] installing lzo-minilzo-2.03-1.1 [ 8s] [48/103] installing make-3.82-1.1 [ 8s] [49/103] installing mpfr-3.0.0-1.1 [ 8s] [50/103] installing ncurses-5.7-1.1 [ 8s] [51/103] installing unzip-6.0-1.4 [ 8s] [52/103] installing zlib-devel-1.2.5-1.7 [ 8s] [53/103] installing bzip2-1.0.5-1.1 [ 8s] [54/103] installing libblkid-2.20.2-1.1 [ 8s] [55/103] installing xz-5.0.3-1.1 [ 8s] [56/103] installing binutils-2.22-1.6 [ 8s] [57/103] installing elfutils-libs-0.152-1.12 [ 8s] [58/103] installing ppl-0.11.2-1.1 [ 8s] [59/103] installing nss-3.12.9-1.8 [ 8s] [60/103] installing perl-5.12.1-1.4 [ 9s] [61/103] installing ncurses-base-5.7-1.1 [ 9s] [62/103] installing perl-HTML-Tagset-3.20-1.1 [ 9s] [63/103] installing perl-IO-Compress-Base-2.008-1.4 [ 9s] [64/103] installing perl-Module-Pluggable-3.60-1.4 [ 9s] [65/103] installing perl-Pod-Escapes-1.04-1.4 [ 9s] [66/103] installing perl-TimeDate-1.20-1.1 [ 9s] [67/103] installing eglibc-devel-2.13-2.1 [ 9s] [68/103] installing file-5.04-1.1 [ 9s] [69/103] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 9s] [70/103] installing perl-libs-5.12.1-1.4 [ 9s] [71/103] installing coreutils-6.9-1.2 [ 9s] [72/103] installing libmount-2.20.2-1.1 [ 9s] [73/103] installing lzo-devel-2.03-1.1 [ 9s] [74/103] installing mpc-0.9-1.1 [ 9s] [75/103] installing perl-devel-5.12.1-1.4 [ 9s] [76/103] installing xz-lzma-compat-5.0.3-1.1 [ 9s] [77/103] installing cloog-ppl-0.16.1-1.1 [ 9s] [78/103] installing nss-sysinit-3.12.9-1.8 [ 9s] [79/103] installing ppl-pwl-0.11.2-1.1 [ 10s] [80/103] installing python-base-2.7.1-1.5 [ 10s] [81/103] installing elfutils-0.152-1.12 [ 10s] [82/103] installing eglibc-common-2.13-2.1 [ 10s] [83/103] installing rpm-libs-4.9.1-1.1 [ 10s] [84/103] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 10s] [85/103] installing perl-Pod-Simple-3.07-1.4 [ 10s] [86/103] installing perl-Test-Simple-0.80-1.4 [ 10s] [87/103] installing gawk-3.1.5-1.4 [ 10s] [88/103] installing gzip-1.3.12-1.1 [ 10s] [89/103] installing perl-IO-Compress-Zlib-2.008-1.4 [ 10s] [90/103] installing perl-Test-Harness-3.12-1.4 [ 10s] [91/103] installing rpm-4.9.1-1.1 [ 11s] [92/103] installing build-2011.01.10a-1.1 [ 11s] [93/103] installing python-devel-2.7.1-1.5 [ 11s] [94/103] installing util-linux-2.20.2-1.1 [ 11s] [95/103] installing cpp-4.6.4-1.3 [ 11s] [96/103] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 11s] [97/103] installing gcc-4.6.4-1.3 [ 11s] [98/103] installing rpm-build-4.9.1-1.1 [ 11s] [99/103] installing perl-CPAN-1.9205-1.4 [ 11s] [100/103] installing autoconf-2.68-1.1 [ 11s] [101/103] installing gcc-c++-4.6.4-1.3 [ 12s] [102/103] installing automake-1.11.1-1.1 [ 12s] [103/103] installing libtool-2.2.6b-1.1 [ 12s] removing nis flags from //etc/nsswitch.conf... [ 12s] now finalizing build dir... [ 12s] /.build/build: line 2585: mount: command not found [ 12s] /.build/build: line 2586: mount: command not found [ 12s] ----------------------------------------------------------------- [ 12s] I have the following modifications for xcb-proto.spec: [ 12s] 5c5 [ 12s] < Release: 3 [ 12s] --- [ 12s] > Release: 1.2 [ 12s] ----------------------------------------------------------------- [ 12s] ----- building xcb-proto.spec (user abuild) [ 12s] ----------------------------------------------------------------- [ 12s] ----------------------------------------------------------------- [ 12s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Mobile/target/d238bfcad45b99dac1d79bf0b6cb8a05-xcb-proto' /home/abuild/rpmbuild/SOURCES/xcb-proto.spec [ 12s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Syt9jj [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + rm -rf xcb-proto-1.7.1 [ 12s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-proto-1.7.1.tar.gz [ 12s] + /bin/tar -xf - [ 12s] + STATUS=0 [ 12s] + '[' 0 -ne 0 ']' [ 12s] + cd xcb-proto-1.7.1 [ 12s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 12s] + exit 0 [ 12s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.J4okxI [ 12s] + umask 022 [ 12s] + cd /home/abuild/rpmbuild/BUILD [ 12s] + cd xcb-proto-1.7.1 [ 12s] + LANG=C [ 12s] + export LANG [ 12s] + unset DISPLAY [ 12s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 12s] + export CFLAGS [ 12s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 12s] + export CXXFLAGS [ 12s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 12s] + export FFLAGS [ 12s] + LD_AS_NEEDED=1 [ 12s] + export LD_AS_NEEDED [ 12s] + ./autogen.sh [ 12s] autoreconf: Entering directory `.' [ 12s] autoreconf: configure.ac: not using Gettext [ 13s] autoreconf: running: aclocal [ 14s] autoreconf: configure.ac: tracing [ 14s] autoreconf: configure.ac: not using Libtool [ 14s] autoreconf: running: /usr/bin/autoconf [ 14s] autoreconf: configure.ac: not using Autoheader [ 14s] autoreconf: running: automake --add-missing --copy --no-force [ 14s] configure.ac:9: installing `./install-sh' [ 14s] configure.ac:9: installing `./missing' [ 14s] autoreconf: Leaving directory `.' [ 14s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 14s] checking for a BSD-compatible install... /usr/bin/install -c [ 15s] checking whether build environment is sane... yes [ 15s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 15s] checking for gawk... gawk [ 15s] checking whether make sets $(MAKE)... yes [ 15s] checking for xmllint... no [ 15s] configure: WARNING: xmllint not found; unable to validate against schema. [ 15s] checking for a Python interpreter with version >= 2.5... python [ 15s] checking for python... /usr/bin/python [ 16s] checking for python version... 2.7 [ 16s] checking for python platform... linux3 [ 16s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 16s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 16s] configure: creating ./config.status [ 16s] config.status: creating Makefile [ 16s] config.status: creating src/Makefile [ 16s] config.status: creating xcbgen/Makefile [ 16s] config.status: creating xcb-proto.pc [ 16s] configure: WARNING: unrecognized options: --enable-maintainer-mode [ 16s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 16s] + export CFLAGS [ 16s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 16s] + export CXXFLAGS [ 16s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 16s] + export FFLAGS [ 16s] + autoreconf -v --install --force [ 16s] autoreconf: Entering directory `.' [ 16s] autoreconf: configure.ac: not using Gettext [ 17s] autoreconf: running: aclocal --force [ 17s] autoreconf: configure.ac: tracing [ 18s] autoreconf: configure.ac: not using Libtool [ 18s] autoreconf: running: /usr/bin/autoconf --force [ 18s] autoreconf: configure.ac: not using Autoheader [ 18s] autoreconf: running: automake --add-missing --copy --force-missing [ 18s] autoreconf: Leaving directory `.' [ 18s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-shared [ 18s] configure: WARNING: unrecognized options: --disable-shared [ 18s] checking for a BSD-compatible install... /usr/bin/install -c [ 19s] checking whether build environment is sane... yes [ 19s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 19s] checking for gawk... gawk [ 19s] checking whether make sets $(MAKE)... yes [ 19s] checking for xmllint... no [ 19s] configure: WARNING: xmllint not found; unable to validate against schema. [ 19s] checking for a Python interpreter with version >= 2.5... python [ 19s] checking for python... /usr/bin/python [ 19s] checking for python version... 2.7 [ 20s] checking for python platform... linux3 [ 20s] checking for python script directory... ${prefix}/lib/python2.7/site-packages [ 20s] checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages [ 20s] configure: creating ./config.status [ 20s] config.status: creating Makefile [ 20s] config.status: creating src/Makefile [ 20s] config.status: creating xcbgen/Makefile [ 20s] config.status: creating xcb-proto.pc [ 20s] configure: WARNING: unrecognized options: --disable-shared [ 20s] + make -j4 [ 20s] Making all in src [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] make[1]: Nothing to be done for `all'. [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] Making all in xcbgen [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[1]: Nothing to be done for `all'. [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] make[1]: Nothing to be done for `all-am'. [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] + exit 0 [ 20s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.FL7scr [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd xcb-proto-1.7.1 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 install [ 20s] Making install in src [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] make[2]: Nothing to be done for `install-exec-am'. [ 20s] test -z "/usr/share/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/xcb" [ 20s] /usr/bin/install -c -m 644 xcb.xsd xproto.xml bigreq.xml composite.xml damage.xml dpms.xml dri2.xml ge.xml glx.xml randr.xml record.xml render.xml res.xml screensaver.xml shape.xml shm.xml sync.xml xc_misc.xml xevie.xml xf86dri.xml xf86vidmode.xml xfixes.xml xinerama.xml xinput.xml xkb.xml xprint.xml xselinux.xml xtest.xml xv.xml xvmc.xml '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/xcb' [ 20s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/src' [ 20s] Making install in xcbgen [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[2]: Nothing to be done for `install-exec-am'. [ 20s] test -z "/usr/lib/python2.7/site-packages/xcbgen" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/lib/python2.7/site-packages/xcbgen" [ 20s] /usr/bin/install -c -m 644 __init__.py error.py expr.py matcher.py state.py xtypes.py '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/lib/python2.7/site-packages/xcbgen' [ 20s] Byte-compiling python modules... [ 20s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 20s] Byte-compiling python modules (optimized versions) ... [ 20s] __init__.pyerror.pyexpr.pymatcher.pystate.pyxtypes.py [ 20s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1/xcbgen' [ 20s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] make[2]: Nothing to be done for `install-exec-am'. [ 20s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/lib/pkgconfig" [ 20s] /usr/bin/install -c -m 644 xcb-proto.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/lib/pkgconfig' [ 20s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1' [ 20s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/info/dir [ 20s] + xargs rm -f -- [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 -regex '.*\.la$' [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 -regex '.*\.a$' [ 20s] + xargs rm -f -- [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/info [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/doc [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/doc/xcb-proto [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/gtk-doc [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386/usr/share/man [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 -regex '.*/man/man./.*.[0-9]' [ 20s] + xargs rm -f -- [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 -regex '.*/man/../man./.*.[0-9]' [ 20s] + xargs rm -f -- [ 20s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 -regex '.*/man/man./.*.[0-9]pm' [ 20s] + xargs rm -f -- [ 20s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-proto-1.7.1 [ 20s] + /usr/lib/rpm/check-buildroot [ 20s] + /usr/lib/rpm//brp-compress [ 20s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 20s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 20s] + /usr/lib/rpm/brp-python-hardlink [ 20s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] Processing files: xcb-proto-1.7.1-1.2.i586 [ 20s] Provides: pkgconfig(xcb-proto) = 1.7.1 [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Requires: /usr/bin/pkg-config python(abi) = 2.7 [ 20s] Processing files: xcb-proto-debuginfo-1.7.1-1.2.i586 [ 20s] Processing files: xcb-proto-debugsource-1.7.1-1.2.i586 [ 20s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-1.2.i586.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-1.2.i586.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-1.2.i586.rpm [ 20s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Ui4op8 [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd xcb-proto-1.7.1 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-proto-1.7.1-1.2.i386 [ 20s] + exit 0 [ 20s] ... checking for files with abuild user/group [ 20s] ... creating baselibs [ 20s] ... comparing built packages with the former built [ 20s] /usr/lib/build/rpm-check.sh [ 20s] compare /.build.oldpackages/xcb-proto-1.7.1-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 21s] compare /.build.oldpackages/xcb-proto-1.7.1-1.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-1.2.i586.rpm [ 22s] /usr/lib/python2.7/site-packages/xcbgen/__init__.pyc differs ( DBase 3 data file (1429221424 records)) [ 22s] --- /tmp/tmp.Dl3w0XZ5aB 2016-04-14 09:04:38.363792998 +0000 [ 22s] +++ /tmp/tmp.gQ6RUFsAj7 2016-04-14 09:04:38.363792998 +0000 [ 22s] @@ -1,4 +1,4 @@ [ 22s] -00000000 03 f3 0d 30 30 30 30 55 63 00 00 00 00 00 00 00 |...0000Uc.......| [ 22s] +00000000 03 f3 0d 30 30 30 30 57 63 00 00 00 00 00 00 00 |...0000Wc.......| [ 22s] 00000010 00 01 00 00 00 40 00 00 00 73 04 00 00 00 64 00 |.....@...s....d.| [ 22s] 00000020 00 53 28 01 00 00 00 4e 28 00 00 00 00 28 00 00 |.S(....N(....(..| [ 22s] 00000030 00 00 28 00 00 00 00 28 00 00 00 00 73 33 00 00 |..(....(....s3..| [ 22s] compare /.build.oldpackages/xcb-proto-debuginfo-1.7.1-1.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-1.2.i586.rpm [ 22s] compare /.build.oldpackages/xcb-proto-debugsource-1.7.1-1.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-1.2.i586.rpm [ 22s] ... saving built statistics [ 22s] /.build/build: line 3144: mount: command not found [ 22s] ERROR: no root disk device found, yet another new device name? [ 22s] ls: cannot access /sys/block/: No such file or directory [ 22s] /.build/build: line 3159: umount: command not found [ 22s] ... saving built packages [ 22s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-1.7.1-1.2.i586.rpm [ 22s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debuginfo-1.7.1-1.2.i586.rpm [ 22s] /home/abuild/rpmbuild/RPMS/i586/xcb-proto-debugsource-1.7.1-1.2.i586.rpm [ 22s] /home/abuild/rpmbuild/SRPMS/xcb-proto-1.7.1-1.2.src.rpm [ 22s] /home/abuild/rpmbuild/OTHER/_statistics [ 22s] [ 22s] w11 finished "build xcb-proto.spec" at Thu Apr 14 09:04:38 UTC 2016. [ 22s] [ 23s] /.build/build: line 368: 213 Killed background_monitor_process [ 25s] [ 20.781169] SysRq : Power Off [ 25s] [ 20.788290] Power down. [ 25s] build: extracting built packages... [ 25s] xcb-proto-1.7.1-1.2.i586.rpm [ 25s] xcb-proto-debuginfo-1.7.1-1.2.i586.rpm [ 25s] xcb-proto-debugsource-1.7.1-1.2.i586.rpm [ 25s] xcb-proto-1.7.1-1.2.src.rpm [ 25s] _statistics Retried build at Mon May 30 02:50:29 2016 returned same result, skipped