[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w09 started "build _service:gbs:capi-system-device.spec" at Mon May 30 10:36:42 UTC 2016. [ 0s] [ 0s] Building capi-system-device for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 '34a433bdc13eed6487904ce319174b11' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-device.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-device.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 10000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4156/2392064 files, 195576/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:capi-system-device.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-device.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 7s] [1/153] installing cloog-0.16.1-2.1 [ 7s] [2/153] installing emulator-kernel-user-headers-3.12.18-2.5 [ 7s] [3/153] installing libX11-common-1.5.0-2.4 [ 7s] [4/153] installing tizen-release-2.2.0-2.1 [ 7s] [5/153] installing tzdata-2014j-2.1 [ 7s] [6/153] installing libgcc-4.6.4-3.7 [ 7s] [7/153] installing setup-0.1-2.1 [ 7s] [8/153] installing filesystem-0.1-2.1 [ 7s] warning: group lock does not exist - using root [ 7s] [9/153] installing eglibc-2.13-4.8 [ 7s] [10/153] installing libstdc++-4.6.4-3.7 [ 7s] [11/153] installing bzip2-libs-1.0.5-2.1 [ 7s] [12/153] installing capi-base-common-0.1.9-2.1 [ 7s] [13/153] installing cpio-2.8-2.2 [ 7s] [14/153] installing e2fsprogs-libs-1.41.9-2.4 [ 7s] [15/153] installing elfutils-libelf-0.152-2.15 [ 7s] [16/153] installing expat-2.0.1-2.1 [ 7s] [17/153] installing findutils-4.2.31-2.2 [ 7s] [18/153] installing fribidi-0.19.6-2.1 [ 7s] [19/153] installing gdbm-1.8.3-2.1 [ 8s] [20/153] installing iniparser-2.17-2.1 [ 8s] [21/153] installing libXau-1.0.7-2.1 [ 8s] [22/153] installing libattr-2.4.44-2.8 [ 8s] [23/153] installing libffi-3.0.9-2.1 [ 8s] [24/153] installing libjpeg-turbo-1.2.0-2.4 [ 8s] [25/153] installing liblua-5.1.4-2.1 [ 8s] [26/153] installing libstdc++-devel-4.6.4-3.7 [ 8s] [27/153] installing libuuid-2.20.2-2.2 [ 8s] [28/153] installing lzo-2.03-2.1 [ 8s] [29/153] installing m4-1.4.14-2.2 [ 8s] [30/153] installing net-tools-1.60-2.5 [ 8s] [31/153] installing nspr-4.9-2.12 [ 8s] [32/153] installing nss-softokn-freebl-3.12.9-2.22 [ 8s] [33/153] installing opengl-es-virtual-drv-0.1.6-2.6 [ 8s] [34/153] installing openssl-1.0.1s-3.4 [ 8s] [35/153] installing pixman-0.28.2-2.1 [ 8s] [36/153] installing pkg-config-0.25-2.2 [ 8s] [37/153] installing popt-1.16-2.1 [ 8s] [38/153] installing readline-5.2-2.1 [ 8s] [39/153] installing sed-4.1.5-2.1 [ 8s] [40/153] installing smack-1.0+s14-2.1 [ 8s] [41/153] installing sqlite-3.7.13-2.2 [ 8s] [42/153] installing tar-1.17-2.2 [ 8s] [43/153] installing xz-libs-5.0.3-2.1 [ 8s] [44/153] installing zlib-1.2.5-2.18 [ 8s] [45/153] installing bash-4.1-2.2 [ 8s] [46/153] installing diffutils-3.0-2.2 [ 8s] [47/153] installing libgomp-4.6.4-3.7 [ 9s] [48/153] installing patch-2.6-2.1 [ 9s] [49/153] installing systemd-libs-210-2.4 [ 9s] [50/153] installing gmp-4.2.1-2.1 [ 9s] [51/153] installing libpcre-7.7-2.2 [ 9s] [52/153] installing ncurses-libs-5.7-2.1 [ 9s] [53/153] installing build-compare-2009.10.14-2.6 [ 9s] [54/153] installing vconf-internal-keys-devel-0.0.150-2.1 [ 9s] [55/153] installing capi-base-common-devel-0.1.9-2.1 [ 9s] [56/153] installing eglibc-headers-2.13-4.8 [ 9s] [57/153] installing grep-2.5.1a-2.1 [ 9s] [58/153] installing libacl-2.2.49-2.2 [ 9s] [59/153] installing libcap-2.21-2.2 [ 9s] [60/153] installing libfile-5.04-2.1 [ 9s] [61/153] installing libpng-1.2.50-2.1 [ 9s] [62/153] installing libxcb-1.8.1-2.1 [ 9s] [63/153] installing libxml2-2.7.8-2.1 [ 9s] [64/153] installing lzo-minilzo-2.03-2.1 [ 9s] [65/153] installing make-3.82-2.2 [ 9s] [66/153] installing mpfr-3.0.0-2.1 [ 9s] [67/153] installing ncurses-5.7-2.1 [ 9s] [68/153] installing unzip-6.0-2.13 [ 9s] [69/153] installing zlib-devel-1.2.5-2.18 [ 9s] [70/153] installing bzip2-1.0.5-2.1 [ 9s] [71/153] installing glib2-2.32.3-2.4 [ 9s] [72/153] installing kmod-libs-15-2.2 [ 9s] [73/153] installing libblkid-2.20.2-2.2 [ 9s] [74/153] installing xz-5.0.3-2.1 [ 10s] [75/153] installing libicu-51-2.4 [ 10s] [76/153] installing smack-utils-1.0+s14-2.1 [ 10s] [77/153] installing binutils-2.22-2.7 [ 10s] [78/153] installing elfutils-libs-0.152-2.15 [ 10s] [79/153] installing ppl-0.11.2-2.2 [ 10s] [80/153] installing nss-3.12.9-2.22 [ 10s] [81/153] installing perl-5.12.1-2.6 [ 11s] [82/153] installing ncurses-base-5.7-2.1 [ 11s] [83/153] installing perl-HTML-Tagset-3.20-2.1 [ 11s] [84/153] installing perl-IO-Compress-Base-2.008-2.6 [ 11s] [85/153] installing perl-Module-Pluggable-3.60-2.6 [ 11s] [86/153] installing perl-Pod-Escapes-1.04-2.6 [ 11s] [87/153] installing perl-TimeDate-1.20-2.1 [ 11s] [88/153] installing eglibc-devel-2.13-4.8 [ 11s] [89/153] installing file-5.04-2.1 [ 11s] [90/153] installing perl-Compress-Raw-Zlib-2.008-2.6 [ 11s] [91/153] installing perl-libs-5.12.1-2.6 [ 11s] [92/153] installing coreutils-6.9-2.4 [ 11s] [93/153] installing freetype-2.5.5-2.1 [ 11s] [94/153] installing libdlog-0.4.1-3.1 [ 11s] [95/153] installing libmount-2.20.2-2.2 [ 11s] [96/153] installing lzo-devel-2.03-2.1 [ 12s] [97/153] installing mpc-0.9-2.1 [ 12s] [98/153] installing perl-devel-5.12.1-2.6 [ 12s] [99/153] installing xz-lzma-compat-5.0.3-2.1 [ 12s] [100/153] installing cloog-ppl-0.16.1-2.1 [ 12s] [101/153] installing libX11-1.5.0-2.4 [ 12s] [102/153] installing nss-sysinit-3.12.9-2.22 [ 12s] [103/153] installing ppl-pwl-0.11.2-2.2 [ 12s] [104/153] installing elfutils-0.152-2.15 [ 12s] [105/153] installing eglibc-common-2.13-4.8 [ 12s] [106/153] installing libarchive-2.8.3-2.2 [ 12s] [107/153] installing rpm-libs-4.9.1-2.2 [ 12s] [108/153] installing eina-1.7.1+svn.77445+build35-2.4 [ 12s] [109/153] installing giflib-4.1.6-2.4 [ 12s] [110/153] installing libXext-1.3.1-2.1 [ 12s] [111/153] installing libXrender-0.9.7-2.1 [ 12s] [112/153] installing perl-ExtUtils-ParseXS-2.18-2.6 [ 12s] [113/153] installing perl-Pod-Simple-3.07-2.6 [ 12s] [114/153] installing perl-Test-Simple-0.80-2.6 [ 12s] [115/153] installing gawk-3.1.5-2.7 [ 12s] [116/153] installing gzip-1.3.12-2.1 [ 12s] [117/153] installing libcryptsvc-0.0.1-2.2 [ 12s] [118/153] installing libdlog-devel-0.4.1-3.1 [ 12s] [119/153] installing perl-IO-Compress-Zlib-2.008-2.6 [ 12s] [120/153] installing perl-Test-Harness-3.12-2.6 [ 12s] [121/153] installing harfbuzz-0.9.40-2.1 [ 12s] [122/153] installing rpm-4.9.1-2.2 [ 13s] [123/153] installing build-2011.01.10a-2.1 [ 13s] [124/153] installing dbus-1.6.4-2.2 [ 13s] [125/153] installing fontconfig-2.9.0-2.1 [ 15s] /opt/var/cache/fontconfig/*: No such file or directory [ 15s] [126/153] installing glib2-devel-2.32.3-2.4 [ 15s] [127/153] installing util-linux-2.20.2-2.2 [ 15s] [128/153] installing cmake-2.8.5-2.2 [ 15s] [129/153] installing cpp-4.6.4-3.7 [ 16s] [130/153] installing dbus-libs-1.6.4-2.2 [ 16s] [131/153] installing ecore-1.7.1+svn.77580+build125-3.1 [ 16s] [132/153] installing perl-ExtUtils-MakeMaker-6.36-2.6 [ 16s] [133/153] installing eet-1.7.1+svn.77495+build14-2.1 [ 16s] [134/153] installing capi-system-info-0.2.0-2.4 [ 16s] [135/153] installing systemd-210-2.4 [ 16s] [136/153] installing gcc-4.6.4-3.7 [ 18s] [137/153] installing rpm-build-4.9.1-2.2 [ 19s] [138/153] installing capi-system-info-devel-0.2.0-2.4 [ 19s] [139/153] installing dbus-devel-1.6.4-2.2 [ 19s] [140/153] installing dbus-glib-0.100-2.1 [ 19s] [141/153] installing perl-CPAN-1.9205-2.6 [ 19s] [142/153] installing autoconf-2.68-2.1 [ 20s] [143/153] installing vconf-0.2.83-2.2 [ 20s] Failed to get D-Bus connection: Unknown error 4294967295 [ 20s] warning: %post(vconf-0.2.83-2.2.i586) scriptlet failed, exit status 1 [ 20s] [144/153] installing gcc-c++-4.6.4-3.7 [ 21s] [145/153] installing evas-1.7.1+svn.77561+build188-3.1 [ 21s] [146/153] installing vconf-keys-devel-0.2.83-2.2 [ 22s] [147/153] installing automake-1.11.1-2.1 [ 22s] [148/153] installing edbus-1.6.0+svn.76526slp2+build10-2.1 [ 23s] [149/153] installing dbus-glib-devel-0.100-2.1 [ 23s] [150/153] installing libtool-2.2.6b-2.1 [ 23s] [151/153] installing vconf-devel-0.2.83-2.2 [ 24s] [152/153] installing libdeviced-1.0.0-3.1 [ 24s] [153/153] installing libdeviced-devel-1.0.0-3.1 [ 24s] removing nis flags from //etc/nsswitch.conf... [ 24s] now finalizing build dir... [ 24s] /.build/build: line 2589: mount: command not found [ 24s] /.build/build: line 2590: mount: command not found [ 24s] ----------------------------------------------------------------- [ 24s] I have the following modifications for capi-system-device.spec: [ 24s] 5c5 [ 24s] < Release: 18 [ 24s] --- [ 24s] > Release: 3.1 [ 24s] ----------------------------------------------------------------- [ 24s] ----- building capi-system-device.spec (user abuild) [ 24s] ----------------------------------------------------------------- [ 24s] ----------------------------------------------------------------- [ 24s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/34a433bdc13eed6487904ce319174b11-capi-system-device' /home/abuild/rpmbuild/SOURCES/capi-system-device.spec [ 24s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.mFi5rY [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + LANG=C [ 24s] + export LANG [ 24s] + unset DISPLAY [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + rm -rf capi-system-device-0.1.0 [ 24s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-device-0.1.0.tar.gz [ 24s] + /bin/tar -xf - [ 24s] + STATUS=0 [ 24s] + '[' 0 -ne 0 ']' [ 24s] + cd capi-system-device-0.1.0 [ 24s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 24s] + exit 0 [ 24s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GSLMBR [ 24s] + umask 022 [ 24s] + cd /home/abuild/rpmbuild/BUILD [ 24s] + cd capi-system-device-0.1.0 [ 24s] + LANG=C [ 24s] + export LANG [ 24s] + unset DISPLAY [ 24s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CFLAGS [ 24s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 24s] + export CXXFLAGS [ 24s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 24s] + export FFLAGS [ 24s] + LD_AS_NEEDED=1 [ 24s] + export LD_AS_NEEDED [ 24s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 24s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 24s] + cp /home/abuild/rpmbuild/SOURCES/capi-system-device.manifest . [ 24s] ++ echo 0.1.0 [ 24s] ++ awk 'BEGIN {FS="."}{print $1}' [ 24s] + MAJORVER=0 [ 24s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.0 -DMAJORVER=0 [ 24s] -- The C compiler identification is GNU [ 24s] -- The CXX compiler identification is GNU [ 24s] -- Check for working C compiler: /usr/bin/gcc [ 24s] -- Check for working C compiler: /usr/bin/gcc -- works [ 24s] -- Detecting C compiler ABI info [ 24s] -- Detecting C compiler ABI info - done [ 24s] -- Check for working CXX compiler: /usr/bin/c++ [ 24s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 24s] -- Detecting CXX compiler ABI info [ 24s] -- Detecting CXX compiler ABI info - done [ 24s] -- checking for module 'deviced dlog vconf dbus-1 dbus-glib-1 capi-base-common capi-system-info' [ 24s] -- found deviced dlog vconf dbus-1 dbus-glib-1 capi-base-common capi-system-info, version 0.1.0;1.0;0.2.45;1.6.4;0.100;0.1.9 [ 24s] -- Configuring done [ 24s] -- Generating done [ 24s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 24s] + make -j4 [ 24s] Scanning dependencies of target capi-system-device [ 24s] [ 10%] [ 20%] [ 30%] [ 40%] Building C object CMakeFiles/capi-system-device.dir/src/battery.c.o [ 24s] Building C object CMakeFiles/capi-system-device.dir/src/led.c.o [ 24s] Building C object CMakeFiles/capi-system-device.dir/src/display.c.o [ 24s] Building C object CMakeFiles/capi-system-device.dir/src/callback.c.o [ 25s] [ 50%] Building C object CMakeFiles/capi-system-device.dir/src/power.c.o [ 25s] [ 60%] Building C object CMakeFiles/capi-system-device.dir/src/cpu.c.o [ 25s] [ 70%] Building C object CMakeFiles/capi-system-device.dir/src/device.c.o [ 25s] [ 80%] Building C object CMakeFiles/capi-system-device.dir/src/memory.c.o [ 25s] [ 90%] Building C object CMakeFiles/capi-system-device.dir/src/dbus.c.o [ 25s] [100%] Building C object CMakeFiles/capi-system-device.dir/src/haptic.c.o [ 25s] Linking C shared library libcapi-system-device.so [ 25s] [100%] Built target capi-system-device [ 25s] + exit 0 [ 25s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.XCUkrM [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd capi-system-device-0.1.0 [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 install [ 25s] [100%] Built target capi-system-device [ 25s] Install the project... [ 25s] -- Install configuration: "" [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/lib/libcapi-system-device.so.0.1.0 [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/lib/libcapi-system-device.so.0 [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/lib/libcapi-system-device.so [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/system/device.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/system/device-error.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/display.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/battery.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/power.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/haptic.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/led.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/callback.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/include/device/device-error.h [ 25s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/lib/pkgconfig/capi-system-device.pc [ 25s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/share/info/dir [ 25s] + xargs rm -f -- [ 25s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 -regex '.*\.la$' [ 25s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 -regex '.*\.a$' [ 25s] + xargs rm -f -- [ 25s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/share/license [ 25s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/share/license/capi-system-device [ 25s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-device-0.1.0 [ 25s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386/usr/lib/libcapi-system-device.so.0.1.0 [ 25s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.0.debug [ 25s] symlinked /usr/lib/debug/usr/lib/libcapi-system-device.so.0.1.0.debug to /usr/lib/debug/usr/lib/libcapi-system-device.so.debug [ 25s] 196 blocks [ 25s] + /usr/lib/rpm/check-buildroot [ 25s] + /usr/lib/rpm//brp-compress [ 25s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 25s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 25s] + /usr/lib/rpm/brp-python-hardlink [ 25s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] Processing files: capi-system-device-0.1.0-3.1.i586 [ 25s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gIG5hbWU9Il8iLz4KPC9yZXF1 [ 25s] ZXN0Pgo8L21hbmlmZXN0Pgo= [ 25s] [ 25s] Provides: libcapi-system-device.so.0 [ 25s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 25s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 25s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 25s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 25s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcapi-system-info.so.0 libdbus-1.so.3 libdbus-glib-1.so.2 libdeviced.so.0.1.0 libdlog.so.0 libglib-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libvconf.so.0 [ 25s] Processing files: capi-system-device-devel-0.1.0-3.1.i586 [ 25s] Provides: pkgconfig(capi-system-device) [ 25s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 25s] Requires: /usr/bin/pkg-config libcapi-system-device.so.0 pkgconfig(capi-base-common) [ 25s] Processing files: capi-system-device-debuginfo-0.1.0-3.1.i586 [ 25s] Processing files: capi-system-device-debugsource-0.1.0-3.1.i586 [ 25s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-3.1.src.rpm [ 25s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-device-0.1.0-3.1.i586.rpm [ 25s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-device-devel-0.1.0-3.1.i586.rpm [ 25s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-device-debuginfo-0.1.0-3.1.i586.rpm [ 25s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-device-debugsource-0.1.0-3.1.i586.rpm [ 25s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9lyuSl [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd capi-system-device-0.1.0 [ 25s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-device-0.1.0-3.1.i386 [ 25s] + exit 0 [ 25s] ... checking for files with abuild user/group [ 25s] ... creating baselibs [ 25s] ... comparing built packages with the former built [ 25s] /usr/lib/build/rpm-check.sh [ 25s] compare /.build.oldpackages/capi-system-device-0.1.0-2.3.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-3.1.src.rpm [ 25s] --- /tmp/tmp.InyOTvjUCn 2016-05-30 10:37:06.919668864 +0000 [ 25s] +++ /tmp/tmp.Dp0SV7xnDG 2016-05-30 10:37:06.931668863 +0000 [ 25s] @@ -1,7 +1,7 @@ [ 25s] capi-system-device 0.1.0 (none) [ 25s] A Device library in TIZEN C API [ 25s] [ 25s] - tizen Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/6660c795ae98d5c0e47e7ed7c19355c6-capi-system-device Apache-2.0 Apache-2.0 [ 25s] + tizen Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/34a433bdc13eed6487904ce319174b11-capi-system-device Apache-2.0 Apache-2.0 [ 25s] System/Libraries (none) (none) (none) (none) [ 25s] (none) 4.9.1 (none) [ 25s] cpio gzip 9 [ 25s] ... saving built statistics [ 25s] /.build/build: line 3148: mount: command not found [ 25s] ERROR: no root disk device found, yet another new device name? [ 25s] ls: cannot access /sys/block/: No such file or directory [ 25s] /.build/build: line 3163: umount: command not found [ 25s] ... saving built packages [ 25s] /home/abuild/rpmbuild/RPMS/i586/capi-system-device-0.1.0-3.1.i586.rpm [ 25s] /home/abuild/rpmbuild/RPMS/i586/capi-system-device-debuginfo-0.1.0-3.1.i586.rpm [ 25s] /home/abuild/rpmbuild/RPMS/i586/capi-system-device-debugsource-0.1.0-3.1.i586.rpm [ 25s] /home/abuild/rpmbuild/RPMS/i586/capi-system-device-devel-0.1.0-3.1.i586.rpm [ 25s] /home/abuild/rpmbuild/SRPMS/capi-system-device-0.1.0-3.1.src.rpm [ 25s] /home/abuild/rpmbuild/OTHER/_statistics [ 25s] [ 25s] w09 finished "build capi-system-device.spec" at Mon May 30 10:37:07 UTC 2016. [ 25s] [ 27s] /.build/build: line 368: 221 Killed background_monitor_process [ 29s] [ 24.567395] SysRq : Power Off [ 29s] [ 24.880181] Power down. [ 29s] build: extracting built packages... [ 29s] capi-system-device-0.1.0-3.1.i586.rpm [ 29s] capi-system-device-debuginfo-0.1.0-3.1.i586.rpm [ 29s] capi-system-device-debugsource-0.1.0-3.1.i586.rpm [ 29s] capi-system-device-devel-0.1.0-3.1.i586.rpm [ 29s] capi-system-device-0.1.0-3.1.src.rpm [ 29s] _statistics