[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w24 started "build _service:gbs:capi-system-sensor.spec" at Mon May 30 10:32:18 UTC 2016. [ 0s] [ 0s] Building capi-system-sensor for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 '4d76ad03187a3665d6359db329202f87' [ 0s] [ 1s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 1s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 2s] [29/31] preinstalling coreutils... [ 2s] [30/31] preinstalling rpm-libs... [ 2s] [31/31] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: libsensord -> sensord [ 3s] breaking dependency libsensord -> sensord [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: ppl -> ppl-pwl [ 3s] breaking dependency ppl -> ppl-pwl [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm -> rpm-libs [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 6s] doing fast boot [ 9s] Creating device nodes with udev [ 11s] Waiting for device /dev/vda to appear: ok [ 11s] fsck from util-linux 2.21.2 [ 11s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 11s] /dev/vda: clean, 4101/2392064 files, 191749/9568256 blocks [ 11s] fsck succeeded. Mounting root device read-write. [ 11s] Mounting root /dev/vda [ 11s] mount -o rw -t ext4 /dev/vda /root [ 12s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] 2nd stage started in virtual machine [ 13s] machine type: x86_64 [ 13s] switching personality to 8... [ 13s] 2nd stage started in virtual machine [ 13s] machine type: i686 [ 13s] /.build/build: line 770: mount: command not found [ 13s] swapon on /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 13s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 13s] logging output to //.build.log... [ 13s] processing specfile /.build-srcdir/_service:gbs:capi-system-sensor.spec ... [ 13s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-system-sensor.spec build rpmlint-Factory ... [ 13s] initializing rpm db... [ 17s] [1/126] installing cloog-0.16.1-2.1 [ 17s] [2/126] installing emulator-kernel-user-headers-3.12.18-2.5 [ 18s] [3/126] installing libX11-common-1.5.0-2.4 [ 21s] [4/126] installing tizen-release-2.2.0-2.1 [ 21s] [5/126] installing tzdata-2014j-2.1 [ 22s] [6/126] installing libgcc-4.6.4-3.7 [ 22s] [7/126] installing setup-0.1-2.1 [ 23s] [8/126] installing filesystem-0.1-2.1 [ 24s] warning: group lock does not exist - using root [ 24s] [9/126] installing eglibc-2.13-4.8 [ 25s] [10/126] installing libstdc++-4.6.4-3.7 [ 26s] [11/126] installing bzip2-libs-1.0.5-2.1 [ 26s] [12/126] installing capi-base-common-0.1.9-2.1 [ 26s] [13/126] installing cpio-2.8-2.2 [ 26s] [14/126] installing e2fsprogs-libs-1.41.9-2.4 [ 26s] [15/126] installing elfutils-libelf-0.152-2.15 [ 26s] [16/126] installing expat-2.0.1-2.1 [ 27s] [17/126] installing findutils-4.2.31-2.2 [ 29s] [18/126] installing gdbm-1.8.3-2.1 [ 35s] [19/126] installing libXau-1.0.7-2.1 [ 35s] [20/126] installing libattr-2.4.44-2.8 [ 36s] [21/126] installing libffi-3.0.9-2.1 [ 36s] [22/126] installing liblua-5.1.4-2.1 [ 36s] [23/126] installing libstdc++-devel-4.6.4-3.7 [ 37s] [24/126] installing libuuid-2.20.2-2.2 [ 37s] [25/126] installing lzo-2.03-2.1 [ 37s] [26/126] installing m4-1.4.14-2.2 [ 37s] [27/126] installing net-tools-1.60-2.5 [ 37s] [28/126] installing nspr-4.9-2.12 [ 38s] [29/126] installing nss-softokn-freebl-3.12.9-2.22 [ 39s] [30/126] installing openssl-1.0.1s-3.4 [ 39s] [31/126] installing pkg-config-0.25-2.2 [ 39s] [32/126] installing popt-1.16-2.1 [ 41s] [33/126] installing readline-5.2-2.1 [ 41s] [34/126] installing sed-4.1.5-2.1 [ 41s] [35/126] installing smack-1.0+s14-2.1 [ 42s] [36/126] installing sqlite-3.7.13-2.2 [ 43s] [37/126] installing tar-1.17-2.2 [ 43s] [38/126] installing xz-libs-5.0.3-2.1 [ 44s] [39/126] installing zlib-1.2.5-2.18 [ 44s] [40/126] installing bash-4.1-2.2 [ 45s] [41/126] installing diffutils-3.0-2.2 [ 46s] [42/126] installing libgomp-4.6.4-3.7 [ 47s] [43/126] installing patch-2.6-2.1 [ 48s] [44/126] installing systemd-libs-210-2.4 [ 48s] [45/126] installing gmp-4.2.1-2.1 [ 48s] [46/126] installing libpcre-7.7-2.2 [ 50s] [47/126] installing ncurses-libs-5.7-2.1 [ 51s] [48/126] installing build-compare-2009.10.14-2.6 [ 52s] [49/126] installing capi-base-common-devel-0.1.9-2.1 [ 53s] [50/126] installing eglibc-headers-2.13-4.8 [ 55s] [51/126] installing grep-2.5.1a-2.1 [ 55s] [52/126] installing libacl-2.2.49-2.2 [ 56s] [53/126] installing libcap-2.21-2.2 [ 56s] [54/126] installing libfile-5.04-2.1 [ 57s] [55/126] installing libxcb-1.8.1-2.1 [ 57s] [56/126] installing libxml2-2.7.8-2.1 [ 58s] [57/126] installing lzo-minilzo-2.03-2.1 [ 58s] [58/126] installing make-3.82-2.2 [ 60s] [59/126] installing mpfr-3.0.0-2.1 [ 60s] [60/126] installing ncurses-5.7-2.1 [ 61s] [61/126] installing unzip-6.0-2.13 [ 61s] [62/126] installing zlib-devel-1.2.5-2.18 [ 62s] [63/126] installing bzip2-1.0.5-2.1 [ 63s] [64/126] installing glib2-2.32.3-2.4 [ 63s] [65/126] installing kmod-libs-15-2.2 [ 63s] [66/126] installing libblkid-2.20.2-2.2 [ 64s] [67/126] installing xz-5.0.3-2.1 [ 64s] [68/126] installing smack-utils-1.0+s14-2.1 [ 66s] [69/126] installing binutils-2.22-2.7 [ 67s] [70/126] installing elfutils-libs-0.152-2.15 [ 67s] [71/126] installing ppl-0.11.2-2.2 [ 68s] [72/126] installing nss-3.12.9-2.22 [ 70s] [73/126] installing perl-5.12.1-2.6 [ 84s] [74/126] installing ncurses-base-5.7-2.1 [ 84s] [75/126] installing perl-HTML-Tagset-3.20-2.1 [ 84s] [76/126] installing perl-IO-Compress-Base-2.008-2.6 [ 84s] [77/126] installing perl-Module-Pluggable-3.60-2.6 [ 85s] [78/126] installing perl-Pod-Escapes-1.04-2.6 [ 85s] [79/126] installing perl-TimeDate-1.20-2.1 [ 85s] [80/126] installing eglibc-devel-2.13-4.8 [ 85s] [81/126] installing file-5.04-2.1 [ 85s] [82/126] installing perl-Compress-Raw-Zlib-2.008-2.6 [ 85s] [83/126] installing perl-libs-5.12.1-2.6 [ 85s] [84/126] installing coreutils-6.9-2.4 [ 85s] [85/126] installing libdlog-0.4.1-3.1 [ 86s] [86/126] installing libmount-2.20.2-2.2 [ 86s] [87/126] installing lzo-devel-2.03-2.1 [ 86s] [88/126] installing mpc-0.9-2.1 [ 86s] [89/126] installing perl-devel-5.12.1-2.6 [ 88s] [90/126] installing xz-lzma-compat-5.0.3-2.1 [ 88s] [91/126] installing cloog-ppl-0.16.1-2.1 [ 88s] [92/126] installing libX11-1.5.0-2.4 [ 88s] [93/126] installing nss-sysinit-3.12.9-2.22 [ 88s] [94/126] installing ppl-pwl-0.11.2-2.2 [ 89s] [95/126] installing elfutils-0.152-2.15 [ 89s] [96/126] installing eglibc-common-2.13-4.8 [ 92s] [97/126] installing libarchive-2.8.3-2.2 [ 92s] [98/126] installing rpm-libs-4.9.1-2.2 [ 92s] [99/126] installing perl-ExtUtils-ParseXS-2.18-2.6 [ 93s] [100/126] installing perl-Pod-Simple-3.07-2.6 [ 94s] [101/126] installing perl-Test-Simple-0.80-2.6 [ 94s] [102/126] installing gawk-3.1.5-2.7 [ 94s] [103/126] installing gzip-1.3.12-2.1 [ 94s] [104/126] installing libdlog-devel-0.4.1-3.1 [ 94s] [105/126] installing perl-IO-Compress-Zlib-2.008-2.6 [ 95s] [106/126] installing perl-Test-Harness-3.12-2.6 [ 96s] [107/126] installing rpm-4.9.1-2.2 [ 96s] [108/126] installing build-2011.01.10a-2.1 [ 97s] [109/126] installing dbus-1.6.4-2.2 [ 97s] [110/126] installing util-linux-2.20.2-2.2 [ 97s] [111/126] installing cmake-2.8.5-2.2 [ 99s] [112/126] installing cpp-4.6.4-3.7 [ 99s] [113/126] installing dbus-libs-1.6.4-2.2 [ 100s] [114/126] installing perl-ExtUtils-MakeMaker-6.36-2.6 [ 100s] [115/126] installing systemd-210-2.4 [ 100s] [116/126] installing gcc-4.6.4-3.7 [ 101s] [117/126] installing rpm-build-4.9.1-2.2 [ 101s] [118/126] installing perl-CPAN-1.9205-2.6 [ 101s] [119/126] installing autoconf-2.68-2.1 [ 101s] [120/126] installing vconf-0.2.83-2.2 [ 101s] Failed to get D-Bus connection: Unknown error 4294967295 [ 101s] warning: %post(vconf-0.2.83-2.2.i586) scriptlet failed, exit status 1 [ 101s] [121/126] installing gcc-c++-4.6.4-3.7 [ 102s] [122/126] installing automake-1.11.1-2.1 [ 102s] [123/126] installing libsensord-1.1.17-4.1 [ 102s] [124/126] installing libtool-2.2.6b-2.1 [ 102s] [125/126] installing sensord-1.1.17-4.1 [ 102s] [126/126] installing libsensord-devel-1.1.17-4.1 [ 102s] removing nis flags from //etc/nsswitch.conf... [ 102s] now finalizing build dir... [ 102s] /.build/build: line 2589: mount: command not found [ 102s] /.build/build: line 2590: mount: command not found [ 102s] ----------------------------------------------------------------- [ 102s] I have the following modifications for capi-system-sensor.spec: [ 102s] 5c5 [ 102s] < Release: 10 [ 102s] --- [ 102s] > Release: 3.1 [ 102s] ----------------------------------------------------------------- [ 102s] ----- building capi-system-sensor.spec (user abuild) [ 102s] ----------------------------------------------------------------- [ 102s] ----------------------------------------------------------------- [ 102s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/4d76ad03187a3665d6359db329202f87-capi-system-sensor' /home/abuild/rpmbuild/SOURCES/capi-system-sensor.spec [ 102s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.c1ue5f [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + LANG=C [ 102s] + export LANG [ 102s] + unset DISPLAY [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + rm -rf capi-system-sensor-0.1.18 [ 102s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-system-sensor-0.1.18.tar.gz [ 102s] + /bin/tar -xf - [ 102s] + STATUS=0 [ 102s] + '[' 0 -ne 0 ']' [ 102s] + cd capi-system-sensor-0.1.18 [ 102s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 102s] + exit 0 [ 102s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.HTjdri [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd capi-system-sensor-0.1.18 [ 102s] + LANG=C [ 102s] + export LANG [ 102s] + unset DISPLAY [ 102s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 102s] + export CFLAGS [ 102s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 102s] + export CXXFLAGS [ 102s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 102s] + export FFLAGS [ 102s] + LD_AS_NEEDED=1 [ 102s] + export LD_AS_NEEDED [ 102s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 102s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 102s] ++ echo 0.1.18 [ 102s] ++ awk 'BEGIN {FS="."}{print $1}' [ 102s] + MAJORVER=0 [ 102s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.18 -DMAJORVER=0 [ 102s] -- The C compiler identification is GNU [ 102s] -- The CXX compiler identification is GNU [ 102s] -- Check for working C compiler: /usr/bin/gcc [ 102s] -- Check for working C compiler: /usr/bin/gcc -- works [ 102s] -- Detecting C compiler ABI info [ 102s] -- Detecting C compiler ABI info - done [ 102s] -- Check for working CXX compiler: /usr/bin/c++ [ 103s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 103s] -- Detecting CXX compiler ABI info [ 103s] -- Detecting CXX compiler ABI info - done [ 103s] -- checking for module 'dlog sensor capi-base-common' [ 103s] -- found dlog sensor capi-base-common, version 1.0;1.1.0;0.1.9 [ 103s] -- Configuring done [ 103s] -- Generating done [ 103s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.18 [ 103s] + make -j4 [ 103s] Scanning dependencies of target capi-system-sensor [ 103s] [ 66%] [ 66%] [100%] Building C object CMakeFiles/capi-system-sensor.dir/src/fusion_util.c.o [ 103s] Building CXX object CMakeFiles/capi-system-sensor.dir/src/sensor.cpp.o [ 103s] Building C object CMakeFiles/capi-system-sensor.dir/src/geomanetic_field.c.o [ 103s] Linking CXX shared library libcapi-system-sensor.so [ 103s] [100%] Built target capi-system-sensor [ 103s] + exit 0 [ 103s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WY8WBn [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd capi-system-sensor-0.1.18 [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 install [ 103s] [100%] Built target capi-system-sensor [ 103s] Install the project... [ 103s] -- Install configuration: "" [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/lib/libcapi-system-sensor.so.0.1.18 [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/lib/libcapi-system-sensor.so.0 [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/lib/libcapi-system-sensor.so [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/include/sensor [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/include/sensor/sensor.h [ 103s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/lib/pkgconfig/capi-system-sensor.pc [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/share/info/dir [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 -regex '.*\.la$' [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 -regex '.*\.a$' [ 103s] + xargs rm -f -- [ 103s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/share/license [ 103s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/share/license/capi-system-sensor [ 103s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-system-sensor-0.1.18 [ 103s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386/usr/lib/libcapi-system-sensor.so.0.1.18 [ 103s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.18.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.debug [ 103s] symlinked /usr/lib/debug/usr/lib/libcapi-system-sensor.so.0.1.18.debug to /usr/lib/debug/usr/lib/libcapi-system-sensor.so.debug [ 103s] 138 blocks [ 103s] + /usr/lib/rpm/check-buildroot [ 103s] + /usr/lib/rpm//brp-compress [ 103s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 103s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 103s] + /usr/lib/rpm/brp-python-hardlink [ 103s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] Processing files: capi-system-sensor-0.1.18-3.1.i586 [ 103s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 103s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cgo= [ 103s] [ 103s] Provides: libcapi-system-sensor.so.0 [ 103s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 103s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 103s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libsensor.so.1 libstdc++.so.6 libstdc++.so.6(GLIBCXX_3.4) [ 103s] Processing files: capi-system-sensor-devel-0.1.18-3.1.i586 [ 103s] Provides: pkgconfig(capi-system-sensor) [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Requires: /usr/bin/pkg-config libcapi-system-sensor.so.0 pkgconfig(capi-base-common) [ 103s] Processing files: capi-system-sensor-debuginfo-0.1.18-3.1.i586 [ 103s] Processing files: capi-system-sensor-debugsource-0.1.18-3.1.i586 [ 103s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-3.1.src.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-0.1.18-3.1.i586.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-devel-0.1.18-3.1.i586.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-debuginfo-0.1.18-3.1.i586.rpm [ 103s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-debugsource-0.1.18-3.1.i586.rpm [ 103s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.OPcdzX [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd capi-system-sensor-0.1.18 [ 103s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-system-sensor-0.1.18-3.1.i386 [ 103s] + exit 0 [ 103s] ... checking for files with abuild user/group [ 103s] ... creating baselibs [ 103s] ... comparing built packages with the former built [ 103s] /usr/lib/build/rpm-check.sh [ 103s] compare /.build.oldpackages/capi-system-sensor-0.1.18-2.2.src.rpm /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-3.1.src.rpm [ 103s] --- /tmp/tmp.191jxYQcjQ 2016-05-30 10:34:00.233846097 +0000 [ 103s] +++ /tmp/tmp.BIZh3c3K25 2016-05-30 10:34:00.249846098 +0000 [ 103s] @@ -1,7 +1,7 @@ [ 103s] capi-system-sensor 0.1.18 (none) [ 103s] A Sensor library in TIZEN C API [ 103s] [ 103s] - tizen Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/c5646aee7168ddbeb3f239ba97d4ed0a-capi-system-sensor Apache-2.0 and PD Apache-2.0 and PD [ 103s] + tizen Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/4d76ad03187a3665d6359db329202f87-capi-system-sensor Apache-2.0 and PD Apache-2.0 and PD [ 103s] TO_BE/FILLED_IN (none) (none) (none) (none) [ 103s] (none) 4.9.1 (none) [ 103s] cpio gzip 9 [ 103s] ... saving built statistics [ 103s] /.build/build: line 3148: mount: command not found [ 103s] ERROR: no root disk device found, yet another new device name? [ 103s] ls: cannot access /sys/block/: No such file or directory [ 103s] /.build/build: line 3163: umount: command not found [ 103s] ... saving built packages [ 104s] /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-0.1.18-3.1.i586.rpm [ 104s] /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-debuginfo-0.1.18-3.1.i586.rpm [ 104s] /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-debugsource-0.1.18-3.1.i586.rpm [ 104s] /home/abuild/rpmbuild/RPMS/i586/capi-system-sensor-devel-0.1.18-3.1.i586.rpm [ 104s] /home/abuild/rpmbuild/SRPMS/capi-system-sensor-0.1.18-3.1.src.rpm [ 104s] /home/abuild/rpmbuild/OTHER/_statistics [ 104s] [ 104s] w24 finished "build capi-system-sensor.spec" at Mon May 30 10:34:00 UTC 2016. [ 104s] [ 105s] /.build/build: line 368: 240 Killed background_monitor_process [ 107s] [ 101.501333] SysRq : Power Off [ 107s] [ 101.612482] Power down. [ 107s] build: extracting built packages... [ 107s] capi-system-sensor-0.1.18-3.1.i586.rpm [ 107s] capi-system-sensor-debuginfo-0.1.18-3.1.i586.rpm [ 107s] capi-system-sensor-debugsource-0.1.18-3.1.i586.rpm [ 107s] capi-system-sensor-devel-0.1.18-3.1.i586.rpm [ 107s] capi-system-sensor-0.1.18-3.1.src.rpm [ 107s] _statistics