[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:data-router.spec" at Mon May 30 10:30:36 UTC 2016. [ 0s] [ 0s] Building data-router for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 'd35cdc1b2044405a0631ad20aaacf9f2' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:data-router.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:data-router.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:data-router.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: dbus-libs -> dbus [ 2s] breaking dependency dbus -> dbus-libs [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 6s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4108/2392064 files, 192211/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] /.build/build: line 770: mount: command not found [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:data-router.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:data-router.spec build rpmlint-Factory ... [ 8s] initializing rpm db... [ 9s] [1/130] installing cloog-0.16.1-2.1 [ 9s] [2/130] installing emulator-kernel-user-headers-3.12.18-2.5 [ 9s] [3/130] installing libX11-common-1.5.0-2.4 [ 9s] [4/130] installing tizen-release-2.2.0-2.1 [ 9s] [5/130] installing tzdata-2014j-2.1 [ 9s] [6/130] installing libgcc-4.6.4-3.7 [ 9s] [7/130] installing setup-0.1-2.1 [ 9s] [8/130] installing filesystem-0.1-2.1 [ 9s] warning: group lock does not exist - using root [ 9s] [9/130] installing eglibc-2.13-4.8 [ 9s] [10/130] installing libstdc++-4.6.4-3.7 [ 9s] [11/130] installing bzip2-libs-1.0.5-2.1 [ 9s] [12/130] installing capi-base-common-0.1.9-2.1 [ 9s] [13/130] installing cpio-2.8-2.2 [ 9s] [14/130] installing e2fsprogs-libs-1.41.9-2.4 [ 9s] [15/130] installing elfutils-libelf-0.152-2.15 [ 9s] [16/130] installing expat-2.0.1-2.1 [ 9s] [17/130] installing findutils-4.2.31-2.2 [ 10s] [18/130] installing gdbm-1.8.3-2.1 [ 10s] [19/130] installing libXau-1.0.7-2.1 [ 10s] [20/130] installing libattr-2.4.44-2.8 [ 10s] [21/130] installing libffi-3.0.9-2.1 [ 10s] [22/130] installing liblua-5.1.4-2.1 [ 10s] [23/130] installing libstdc++-devel-4.6.4-3.7 [ 10s] [24/130] installing libuuid-2.20.2-2.2 [ 10s] [25/130] installing lzo-2.03-2.1 [ 10s] [26/130] installing m4-1.4.14-2.2 [ 10s] [27/130] installing net-tools-1.60-2.5 [ 10s] [28/130] installing nspr-4.9-2.12 [ 10s] [29/130] installing nss-softokn-freebl-3.12.9-2.22 [ 10s] [30/130] installing openssl-1.0.1s-3.4 [ 10s] [31/130] installing pkg-config-0.25-2.2 [ 10s] [32/130] installing popt-1.16-2.1 [ 10s] [33/130] installing readline-5.2-2.1 [ 10s] [34/130] installing sed-4.1.5-2.1 [ 10s] [35/130] installing smack-1.0+s14-2.1 [ 10s] [36/130] installing sqlite-3.7.13-2.2 [ 10s] [37/130] installing tar-1.17-2.2 [ 10s] [38/130] installing xz-libs-5.0.3-2.1 [ 10s] [39/130] installing zlib-1.2.5-2.18 [ 10s] [40/130] installing bash-4.1-2.2 [ 10s] [41/130] installing diffutils-3.0-2.2 [ 10s] [42/130] installing libgomp-4.6.4-3.7 [ 11s] [43/130] installing patch-2.6-2.1 [ 11s] [44/130] installing systemd-libs-210-2.4 [ 11s] [45/130] installing gmp-4.2.1-2.1 [ 11s] [46/130] installing libpcre-7.7-2.2 [ 11s] [47/130] installing ncurses-libs-5.7-2.1 [ 11s] [48/130] installing build-compare-2009.10.14-2.6 [ 11s] [49/130] installing vconf-internal-keys-devel-0.0.150-2.1 [ 11s] [50/130] installing capi-base-common-devel-0.1.9-2.1 [ 11s] [51/130] installing eglibc-headers-2.13-4.8 [ 11s] [52/130] installing grep-2.5.1a-2.1 [ 11s] [53/130] installing libacl-2.2.49-2.2 [ 11s] [54/130] installing libcap-2.21-2.2 [ 11s] [55/130] installing libfile-5.04-2.1 [ 11s] [56/130] installing libxcb-1.8.1-2.1 [ 11s] [57/130] installing libxml2-2.7.8-2.1 [ 11s] [58/130] installing lzo-minilzo-2.03-2.1 [ 11s] [59/130] installing make-3.82-2.2 [ 11s] [60/130] installing mpfr-3.0.0-2.1 [ 11s] [61/130] installing ncurses-5.7-2.1 [ 11s] [62/130] installing unzip-6.0-2.13 [ 12s] [63/130] installing zlib-devel-1.2.5-2.18 [ 12s] [64/130] installing bzip2-1.0.5-2.1 [ 12s] [65/130] installing glib2-2.32.3-2.4 [ 12s] [66/130] installing kmod-libs-15-2.2 [ 12s] [67/130] installing libblkid-2.20.2-2.2 [ 13s] [68/130] installing xz-5.0.3-2.1 [ 13s] [69/130] installing smack-utils-1.0+s14-2.1 [ 13s] [70/130] installing binutils-2.22-2.7 [ 14s] [71/130] installing elfutils-libs-0.152-2.15 [ 14s] [72/130] installing ppl-0.11.2-2.2 [ 15s] [73/130] installing nss-3.12.9-2.22 [ 15s] [74/130] installing perl-5.12.1-2.6 [ 20s] [75/130] installing ncurses-base-5.7-2.1 [ 21s] [76/130] installing perl-HTML-Tagset-3.20-2.1 [ 21s] [77/130] installing perl-IO-Compress-Base-2.008-2.6 [ 21s] [78/130] installing perl-Module-Pluggable-3.60-2.6 [ 21s] [79/130] installing perl-Pod-Escapes-1.04-2.6 [ 21s] [80/130] installing perl-TimeDate-1.20-2.1 [ 21s] [81/130] installing eglibc-devel-2.13-4.8 [ 21s] [82/130] installing file-5.04-2.1 [ 21s] [83/130] installing perl-Compress-Raw-Zlib-2.008-2.6 [ 21s] [84/130] installing perl-libs-5.12.1-2.6 [ 21s] [85/130] installing coreutils-6.9-2.4 [ 21s] [86/130] installing libdlog-0.4.1-3.1 [ 21s] [87/130] installing libmount-2.20.2-2.2 [ 21s] [88/130] installing lzo-devel-2.03-2.1 [ 21s] [89/130] installing mpc-0.9-2.1 [ 21s] [90/130] installing perl-devel-5.12.1-2.6 [ 21s] [91/130] installing xz-lzma-compat-5.0.3-2.1 [ 21s] [92/130] installing cloog-ppl-0.16.1-2.1 [ 21s] [93/130] installing libX11-1.5.0-2.4 [ 22s] [94/130] installing nss-sysinit-3.12.9-2.22 [ 22s] [95/130] installing ppl-pwl-0.11.2-2.2 [ 22s] [96/130] installing elfutils-0.152-2.15 [ 22s] [97/130] installing eglibc-common-2.13-4.8 [ 22s] [98/130] installing libarchive-2.8.3-2.2 [ 22s] [99/130] installing rpm-libs-4.9.1-2.2 [ 22s] [100/130] installing perl-ExtUtils-ParseXS-2.18-2.6 [ 22s] [101/130] installing perl-Pod-Simple-3.07-2.6 [ 22s] [102/130] installing perl-Test-Simple-0.80-2.6 [ 22s] [103/130] installing gawk-3.1.5-2.7 [ 22s] [104/130] installing gzip-1.3.12-2.1 [ 22s] [105/130] installing libdlog-devel-0.4.1-3.1 [ 22s] [106/130] installing perl-IO-Compress-Zlib-2.008-2.6 [ 22s] [107/130] installing perl-Test-Harness-3.12-2.6 [ 22s] [108/130] installing rpm-4.9.1-2.2 [ 22s] [109/130] installing build-2011.01.10a-2.1 [ 23s] [110/130] installing dbus-1.6.4-2.2 [ 23s] [111/130] installing glib2-devel-2.32.3-2.4 [ 23s] [112/130] installing util-linux-2.20.2-2.2 [ 30s] [113/130] installing cmake-2.8.5-2.2 [ 30s] [114/130] installing cpp-4.6.4-3.7 [ 30s] [115/130] installing dbus-libs-1.6.4-2.2 [ 30s] [116/130] installing perl-ExtUtils-MakeMaker-6.36-2.6 [ 30s] [117/130] installing systemd-210-2.4 [ 30s] [118/130] installing gcc-4.6.4-3.7 [ 31s] [119/130] installing rpm-build-4.9.1-2.2 [ 31s] [120/130] installing dbus-devel-1.6.4-2.2 [ 31s] [121/130] installing dbus-glib-0.100-2.1 [ 31s] [122/130] installing perl-CPAN-1.9205-2.6 [ 31s] [123/130] installing autoconf-2.68-2.1 [ 31s] [124/130] installing vconf-0.2.83-2.2 [ 31s] Failed to get D-Bus connection: Unknown error 4294967295 [ 31s] warning: %post(vconf-0.2.83-2.2.i586) scriptlet failed, exit status 1 [ 31s] [125/130] installing gcc-c++-4.6.4-3.7 [ 31s] [126/130] installing vconf-keys-devel-0.2.83-2.2 [ 31s] [127/130] installing automake-1.11.1-2.1 [ 31s] [128/130] installing dbus-glib-devel-0.100-2.1 [ 31s] [129/130] installing libtool-2.2.6b-2.1 [ 31s] [130/130] installing vconf-devel-0.2.83-2.2 [ 31s] removing nis flags from //etc/nsswitch.conf... [ 31s] now finalizing build dir... [ 31s] /.build/build: line 2589: mount: command not found [ 31s] /.build/build: line 2590: mount: command not found [ 32s] ----------------------------------------------------------------- [ 32s] I have the following modifications for data-router.spec: [ 32s] 5c5 [ 32s] < Release: 1 [ 32s] --- [ 32s] > Release: 2.2 [ 32s] ----------------------------------------------------------------- [ 32s] ----- building data-router.spec (user abuild) [ 32s] ----------------------------------------------------------------- [ 32s] ----------------------------------------------------------------- [ 32s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/d35cdc1b2044405a0631ad20aaacf9f2-data-router' /home/abuild/rpmbuild/SOURCES/data-router.spec [ 32s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.d022vy [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + rm -rf data-router-0.2.17 [ 32s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/data-router-0.2.17.tar.gz [ 32s] + /bin/tar -xf - [ 32s] + STATUS=0 [ 32s] + '[' 0 -ne 0 ']' [ 32s] + cd data-router-0.2.17 [ 32s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 32s] + exit 0 [ 32s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.1N2RCg [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd data-router-0.2.17 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 32s] + export CFLAGS [ 32s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 32s] + export CXXFLAGS [ 32s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 32s] + export FFLAGS [ 32s] + LD_AS_NEEDED=1 [ 32s] + export LD_AS_NEEDED [ 32s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr [ 32s] -- The C compiler identification is GNU [ 32s] -- Check for working C compiler: /usr/bin/gcc [ 32s] -- Check for working C compiler: /usr/bin/gcc -- works [ 32s] -- Detecting C compiler ABI info [ 32s] -- Detecting C compiler ABI info - done [ 32s] -- checking for modules 'glib-2.0;dbus-glib-1;dlog;vconf' [ 32s] -- found glib-2.0, version 2.32.3 [ 32s] -- found dbus-glib-1, version 0.100 [ 32s] -- found dlog, version 1.0 [ 32s] -- found vconf, version 0.2.45 [ 32s] -- Configuring done [ 32s] -- Generating done [ 32s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/data-router-0.2.17 [ 32s] + make -j4 [ 32s] Scanning dependencies of target data-router [ 32s] [ 12%] [ 25%] [ 50%] [ 50%] Building C object CMakeFiles/data-router.dir/src/dr-usb.c.o [ 32s] Building C object CMakeFiles/data-router.dir/src/dr-noti-handler.c.o [ 32s] Building C object CMakeFiles/data-router.dir/src/dr-modem.c.o [ 32s] Building C object CMakeFiles/data-router.dir/src/dr-main.c.o [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-noti-handler.c: In function '__usb_mode_noti_handler': [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-noti-handler.c:77:6: warning: unused variable 'usb_state' [-Wunused-variable] [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-usb.c: In function '_init_usb': [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-usb.c:166:2: warning: implicit declaration of function '_send_dtr_ctrl_signal' [-Wimplicit-function-declaration] [ 32s] [ 62%] Building C object CMakeFiles/data-router.dir/src/dr-util.c.o [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-main.c: In function '__signal_handler': [ 32s] /home/abuild/rpmbuild/BUILD/data-router-0.2.17/src/dr-main.c:47:2: warning: implicit declaration of function '_send_dtr_ctrl_signal' [-Wimplicit-function-declaration] [ 32s] [ 75%] Building C object CMakeFiles/data-router.dir/src/dr-common.c.o [ 32s] [ 87%] Building C object CMakeFiles/data-router.dir/src/dr-parser.c.o [ 32s] [100%] Building C object CMakeFiles/data-router.dir/src/dr-ipc.c.o [ 32s] Linking C executable data-router [ 32s] [100%] Built target data-router [ 32s] + exit 0 [ 32s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.TIetV0 [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd data-router-0.2.17 [ 32s] + LANG=C [ 32s] + export LANG [ 32s] + unset DISPLAY [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 install [ 32s] [100%] Built target data-router [ 32s] Install the project... [ 32s] -- Install configuration: "" [ 32s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/usr/bin/data-router [ 32s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/etc/smack/accesses.d/data-router.rule [ 32s] + rm -f /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/usr/share/info/dir [ 32s] + xargs rm -f -- [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 -regex '.*\.la$' [ 32s] + find /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 -regex '.*\.a$' [ 32s] + xargs rm -f -- [ 32s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/usr/share/license [ 32s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/usr/share/license/data-router [ 32s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/data-router-0.2.17 [ 32s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386/usr/bin/data-router [ 32s] 67 blocks [ 32s] + /usr/lib/rpm/check-buildroot [ 32s] + /usr/lib/rpm//brp-compress [ 32s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 32s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 32s] + /usr/lib/rpm/brp-python-hardlink [ 32s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] Processing files: data-router-0.2.17-2.2.i586 [ 32s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxkZWZpbmU+CiAgICAgICAgICAgICAgICA8ZG9t [ 32s] YWluIG5hbWU9ImRhdGEtcm91dGVyIi8+CgkJPHJlcXVlc3Q+CgkJCTxzbWFjayBy [ 32s] ZXF1ZXN0PSJ0ZWxlcGhvbnlfZnJhbWV3b3JrOjpwcm9wZXJ0aWVzIiB0eXBlPSJy [ 32s] dyIvPgoJCTwvcmVxdWVzdD4KICAgICAgICA8L2RlZmluZT4KICAgICAgICA8cmVx [ 32s] dWVzdD4KICAgICAgICAgICAgICAgIDxkb21haW4gbmFtZT0iZGF0YS1yb3V0ZXIi [ 32s] Lz4KICAgICAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 32s] [ 32s] Requires(interp): /bin/sh /bin/sh [ 32s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 32s] Requires(post): /bin/sh /usr/bin/vconftool [ 32s] Requires(postun): /bin/sh [ 32s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-glib-1.so.2 libdlog.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.1) libvconf.so.0 [ 32s] Processing files: data-router-debuginfo-0.2.17-2.2.i586 [ 32s] Processing files: data-router-debugsource-0.2.17-2.2.i586 [ 32s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] Wrote: /home/abuild/rpmbuild/SRPMS/data-router-0.2.17-2.2.src.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/data-router-0.2.17-2.2.i586.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/data-router-debuginfo-0.2.17-2.2.i586.rpm [ 32s] Wrote: /home/abuild/rpmbuild/RPMS/i586/data-router-debugsource-0.2.17-2.2.i586.rpm [ 32s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.b2LVyN [ 32s] + umask 022 [ 32s] + cd /home/abuild/rpmbuild/BUILD [ 32s] + cd data-router-0.2.17 [ 32s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/data-router-0.2.17-2.2.i386 [ 32s] + exit 0 [ 32s] ... checking for files with abuild user/group [ 32s] ... creating baselibs [ 32s] ... comparing built packages with the former built [ 32s] /usr/lib/build/rpm-check.sh [ 32s] compare /.build.oldpackages/data-router-0.2.17-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/data-router-0.2.17-2.2.src.rpm [ 33s] compare /.build.oldpackages/data-router-0.2.17-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/data-router-0.2.17-2.2.i586.rpm [ 33s] /usr/bin/data-router differs in ELF sections [ 33s] --- /tmp/tmp.Wj6UK8zohn 2016-05-30 10:31:08.885233396 +0000 [ 33s] +++ /tmp/tmp.hk8qjuGYqd 2016-05-30 10:31:08.893233396 +0000 [ 33s] @@ -9,8 +9,8 @@ [ 33s] 0158 00000000 02000000 06000000 19000000 ................ [ 33s] Contents of section .note.gnu.build-id: [ 33s] 0168 04000000 14000000 03000000 474e5500 ............GNU. [ 33s] - 0178 b87e622c 59c4aa05 b9ab7bc1 662903d9 .~b,Y.....{.f).. [ 33s] - 0188 3ba9f0bd ;... [ 33s] + 0178 826c0a69 27310272 59cb99cb 5287a5b5 .l.i'1.rY...R... [ 33s] + 0188 a9a121ae ..!. [ 33s] Contents of section .hash: [ 33s] 018c 61000000 76000000 39000000 2e000000 a...v...9....... [ 33s] 019c 4b000000 00000000 17000000 25000000 K...........%... [ 33s] @@ -1300,4 +1300,4 @@ [ 33s] 52a0 00000000 a4520000 .....R.. [ 33s] Contents of section .gnu_debuglink: [ 33s] 0000 64617461 2d726f75 7465722e 64656275 data-router.debu [ 33s] - 0010 67000000 0eff3105 g.....1. [ 33s] + 0010 67000000 d2cd58dc g.....X. [ 33s] compare /.build.oldpackages/data-router-debuginfo-0.2.17-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/data-router-debuginfo-0.2.17-2.2.i586.rpm [ 33s] --- /tmp/tmp.qLvhy2YC4F 2016-05-30 10:31:09.013233398 +0000 [ 33s] +++ /tmp/tmp.rKjJrtQQug 2016-05-30 10:31:09.025233398 +0000 [ 33s] @@ -1,8 +1,8 @@ [ 33s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 33s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 33s] -/usr/lib/debug/.build-id/b8/ 0 (none) 40755 root root 0 4294967295 [ 33s] -/usr/lib/debug/.build-id/b8/7e622c59c4aa05b9ab7bc1662903d93ba9f0bd 0 (none) 120777 root root 0 4294967295 ../../../../bin/data-router [ 33s] -/usr/lib/debug/.build-id/b8/7e622c59c4aa05b9ab7bc1662903d93ba9f0bd.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/data-router.debug [ 33s] +/usr/lib/debug/.build-id/82/ 0 (none) 40755 root root 0 4294967295 [ 33s] +/usr/lib/debug/.build-id/82/6c0a692731027259cb99cb5287a5b5a9a121ae 0 (none) 120777 root root 0 4294967295 ../../../../bin/data-router [ 33s] +/usr/lib/debug/.build-id/82/6c0a692731027259cb99cb5287a5b5a9a121ae.debug 0 (none) 120777 root root 0 4294967295 ../../usr/bin/data-router.debug [ 33s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 33s] /usr/lib/debug/usr/bin/ 0 (none) 40755 root root 0 4294967295 [ 33s] /usr/lib/debug/usr/bin/data-router.debug 0 (none) 100755 root root 0 4294967295 [ 33s] RPM meta information is different [ 33s] compare /.build.oldpackages/data-router-debugsource-0.2.17-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/data-router-debugsource-0.2.17-2.2.i586.rpm [ 33s] ... saving built statistics [ 33s] /.build/build: line 3148: mount: command not found [ 33s] ERROR: no root disk device found, yet another new device name? [ 33s] ls: cannot access /sys/block/: No such file or directory [ 33s] /.build/build: line 3163: umount: command not found [ 33s] ... saving built packages [ 33s] /home/abuild/rpmbuild/RPMS/i586/data-router-0.2.17-2.2.i586.rpm [ 33s] /home/abuild/rpmbuild/RPMS/i586/data-router-debuginfo-0.2.17-2.2.i586.rpm [ 33s] /home/abuild/rpmbuild/RPMS/i586/data-router-debugsource-0.2.17-2.2.i586.rpm [ 33s] /home/abuild/rpmbuild/SRPMS/data-router-0.2.17-2.2.src.rpm [ 33s] /home/abuild/rpmbuild/OTHER/_statistics [ 33s] [ 33s] w17 finished "build data-router.spec" at Mon May 30 10:31:09 UTC 2016. [ 33s] [ 40s] [ 33.949347] SysRq : Power Off [ 40s] [ 34.160326] Power down. [ 40s] build: extracting built packages... [ 40s] data-router-0.2.17-2.2.i586.rpm [ 40s] data-router-debuginfo-0.2.17-2.2.i586.rpm [ 40s] data-router-debugsource-0.2.17-2.2.i586.rpm [ 40s] data-router-0.2.17-2.2.src.rpm [ 40s] _statistics