[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w22 started "build _service:gbs:kickstarter.spec" at Mon May 30 10:23:18 UTC 2016. [ 0s] [ 0s] Building kickstarter for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 'f296b67d17cf2157d0d6780c6720b2e6' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:kickstarter.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:kickstarter.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:kickstarter.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 2s] [4/31] preinstalling filesystem... [ 2s] [5/31] preinstalling eglibc... [ 2s] [6/31] preinstalling bzip2-libs... [ 2s] [7/31] preinstalling elfutils-libelf... [ 2s] [8/31] preinstalling libattr... [ 2s] [9/31] preinstalling liblua... [ 2s] [10/31] preinstalling ncurses-libs... [ 2s] [11/31] preinstalling nspr... [ 2s] [12/31] preinstalling nss-softokn-freebl... [ 2s] [13/31] preinstalling popt... [ 2s] [14/31] preinstalling readline... [ 2s] [15/31] preinstalling sed... [ 2s] [16/31] preinstalling sqlite... [ 2s] [17/31] preinstalling tar... [ 2s] [18/31] preinstalling xz-libs... [ 2s] [19/31] preinstalling zlib... [ 2s] [20/31] preinstalling bash... [ 2s] [21/31] preinstalling diffutils... [ 2s] [22/31] preinstalling libstdc++... [ 2s] [23/31] preinstalling eglibc-common... [ 2s] [24/31] preinstalling libacl... [ 2s] [25/31] preinstalling libcap... [ 2s] [26/31] preinstalling libfile... [ 2s] [27/31] preinstalling bzip2... [ 2s] [28/31] preinstalling nss... [ 2s] [29/31] preinstalling coreutils... [ 2s] [30/31] preinstalling rpm-libs... [ 2s] [31/31] preinstalling rpm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: ppl -> ppl-pwl [ 3s] breaking dependency ppl -> ppl-pwl [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm -> rpm-libs [ 3s] breaking dependency rpm-libs -> rpm [ 4s] done [ 8s] booting kvm ... [ 8s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 6000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 4056/2392064 files, 189667/9568256 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 21s] replacing /etc/mtab with symlink to /proc/self/mounts [ 21s] 2nd stage started in virtual machine [ 21s] machine type: x86_64 [ 21s] switching personality to 8... [ 21s] 2nd stage started in virtual machine [ 21s] machine type: i686 [ 21s] /.build/build: line 770: mount: command not found [ 21s] swapon on /dev/vdb [ 22s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 22s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 22s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 22s] logging output to //.build.log... [ 22s] processing specfile /.build-srcdir/_service:gbs:kickstarter.spec ... [ 22s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:kickstarter.spec build rpmlint-Factory ... [ 22s] initializing rpm db... [ 22s] [1/104] installing cloog-0.16.1-2.1 [ 22s] [2/104] installing emulator-kernel-user-headers-3.12.18-2.5 [ 22s] [3/104] installing tizen-release-2.2.0-2.1 [ 22s] [4/104] installing tzdata-2014j-2.1 [ 22s] [5/104] installing libgcc-4.6.4-3.7 [ 22s] [6/104] installing setup-0.1-2.1 [ 22s] [7/104] installing filesystem-0.1-2.1 [ 22s] warning: group lock does not exist - using root [ 22s] [8/104] installing eglibc-2.13-4.8 [ 22s] [9/104] installing libstdc++-4.6.4-3.7 [ 23s] [10/104] installing bzip2-libs-1.0.5-2.1 [ 23s] [11/104] installing cpio-2.8-2.2 [ 23s] [12/104] installing e2fsprogs-libs-1.41.9-2.4 [ 23s] [13/104] installing elfutils-libelf-0.152-2.15 [ 23s] [14/104] installing findutils-4.2.31-2.2 [ 23s] [15/104] installing gdbm-1.8.3-2.1 [ 23s] [16/104] installing libattr-2.4.44-2.8 [ 23s] [17/104] installing liblua-5.1.4-2.1 [ 23s] [18/104] installing libstdc++-devel-4.6.4-3.7 [ 23s] [19/104] installing libuuid-2.20.2-2.2 [ 23s] [20/104] installing lzo-2.03-2.1 [ 23s] [21/104] installing m4-1.4.14-2.2 [ 23s] [22/104] installing net-tools-1.60-2.5 [ 23s] [23/104] installing nspr-4.9-2.12 [ 23s] [24/104] installing nss-softokn-freebl-3.12.9-2.22 [ 23s] [25/104] installing pkg-config-0.25-2.2 [ 23s] [26/104] installing popt-1.16-2.1 [ 23s] [27/104] installing readline-5.2-2.1 [ 23s] [28/104] installing sed-4.1.5-2.1 [ 23s] [29/104] installing sqlite-3.7.13-2.2 [ 23s] [30/104] installing tar-1.17-2.2 [ 23s] [31/104] installing xz-libs-5.0.3-2.1 [ 23s] [32/104] installing zlib-1.2.5-2.18 [ 23s] [33/104] installing bash-4.1-2.2 [ 23s] [34/104] installing diffutils-3.0-2.2 [ 23s] [35/104] installing libgomp-4.6.4-3.7 [ 23s] [36/104] installing patch-2.6-2.1 [ 24s] [37/104] installing gmp-4.2.1-2.1 [ 24s] [38/104] installing libpcre-7.7-2.2 [ 24s] [39/104] installing ncurses-libs-5.7-2.1 [ 24s] [40/104] installing build-compare-2009.10.14-2.6 [ 24s] [41/104] installing eglibc-headers-2.13-4.8 [ 24s] [42/104] installing grep-2.5.1a-2.1 [ 24s] [43/104] installing libacl-2.2.49-2.2 [ 24s] [44/104] installing libcap-2.21-2.2 [ 24s] [45/104] installing libfile-5.04-2.1 [ 24s] [46/104] installing libpython-2.7.1-2.8 [ 24s] [47/104] installing lzo-minilzo-2.03-2.1 [ 24s] [48/104] installing make-3.82-2.2 [ 24s] [49/104] installing mpfr-3.0.0-2.1 [ 24s] [50/104] installing ncurses-5.7-2.1 [ 24s] [51/104] installing unzip-6.0-2.13 [ 24s] [52/104] installing zlib-devel-1.2.5-2.18 [ 24s] [53/104] installing bzip2-1.0.5-2.1 [ 24s] [54/104] installing libblkid-2.20.2-2.2 [ 24s] [55/104] installing xz-5.0.3-2.1 [ 24s] [56/104] installing binutils-2.22-2.7 [ 24s] [57/104] installing elfutils-libs-0.152-2.15 [ 24s] [58/104] installing ppl-0.11.2-2.2 [ 24s] [59/104] installing nss-3.12.9-2.22 [ 25s] [60/104] installing perl-5.12.1-2.6 [ 25s] [61/104] installing ncurses-base-5.7-2.1 [ 25s] [62/104] installing perl-HTML-Tagset-3.20-2.1 [ 25s] [63/104] installing perl-IO-Compress-Base-2.008-2.6 [ 25s] [64/104] installing perl-Module-Pluggable-3.60-2.6 [ 25s] [65/104] installing perl-Pod-Escapes-1.04-2.6 [ 26s] [66/104] installing perl-TimeDate-1.20-2.1 [ 26s] [67/104] installing eglibc-devel-2.13-4.8 [ 26s] [68/104] installing file-5.04-2.1 [ 26s] [69/104] installing perl-Compress-Raw-Zlib-2.008-2.6 [ 26s] [70/104] installing perl-libs-5.12.1-2.6 [ 26s] [71/104] installing coreutils-6.9-2.4 [ 26s] [72/104] installing libmount-2.20.2-2.2 [ 26s] [73/104] installing lzo-devel-2.03-2.1 [ 26s] [74/104] installing mpc-0.9-2.1 [ 26s] [75/104] installing perl-devel-5.12.1-2.6 [ 26s] [76/104] installing xz-lzma-compat-5.0.3-2.1 [ 26s] [77/104] installing cloog-ppl-0.16.1-2.1 [ 26s] [78/104] installing nss-sysinit-3.12.9-2.22 [ 26s] [79/104] installing ppl-pwl-0.11.2-2.2 [ 26s] [80/104] installing python-base-2.7.1-2.8 [ 26s] [81/104] installing elfutils-0.152-2.15 [ 26s] [82/104] installing eglibc-common-2.13-4.8 [ 27s] [83/104] installing rpm-libs-4.9.1-2.2 [ 27s] [84/104] installing perl-ExtUtils-ParseXS-2.18-2.6 [ 27s] [85/104] installing perl-Pod-Simple-3.07-2.6 [ 27s] [86/104] installing perl-Test-Simple-0.80-2.6 [ 27s] [87/104] installing gawk-3.1.5-2.7 [ 27s] [88/104] installing gzip-1.3.12-2.1 [ 27s] [89/104] installing perl-IO-Compress-Zlib-2.008-2.6 [ 27s] [90/104] installing perl-Test-Harness-3.12-2.6 [ 27s] [91/104] installing python-cheetah-2.4.4-2.1 [ 27s] [92/104] installing rpm-4.9.1-2.2 [ 27s] [93/104] installing build-2011.01.10a-2.1 [ 27s] [94/104] installing python-devel-2.7.1-2.8 [ 28s] [95/104] installing util-linux-2.20.2-2.2 [ 28s] [96/104] installing cpp-4.6.4-3.7 [ 28s] [97/104] installing perl-ExtUtils-MakeMaker-6.36-2.6 [ 28s] [98/104] installing gcc-4.6.4-3.7 [ 28s] [99/104] installing rpm-build-4.9.1-2.2 [ 28s] [100/104] installing perl-CPAN-1.9205-2.6 [ 28s] [101/104] installing autoconf-2.68-2.1 [ 28s] [102/104] installing gcc-c++-4.6.4-3.7 [ 28s] [103/104] installing automake-1.11.1-2.1 [ 28s] [104/104] installing libtool-2.2.6b-2.1 [ 28s] removing nis flags from //etc/nsswitch.conf... [ 28s] now finalizing build dir... [ 28s] /.build/build: line 2589: mount: command not found [ 28s] /.build/build: line 2590: mount: command not found [ 29s] Warning: spec file parser line 51: can't expand %(...) [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for kickstarter.spec: [ 29s] 6c6 [ 29s] < Release: 1 [ 29s] --- [ 29s] > Release: 2.4 [ 29s] 53a54 [ 29s] > %changelog [ 29s] ----------------------------------------------------------------- [ 29s] ----- building kickstarter.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/f296b67d17cf2157d0d6780c6720b2e6-kickstarter' /home/abuild/rpmbuild/SOURCES/kickstarter.spec [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.msapd6 [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf kickstarter-0.15 [ 29s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/kickstarter-0.15.tar.bz2 [ 29s] + /bin/tar -xf - [ 29s] + STATUS=0 [ 29s] + '[' 0 -ne 0 ']' [ 29s] + cd kickstarter-0.15 [ 29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 29s] + exit 0 [ 29s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GF3iBk [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd kickstarter-0.15 [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + LD_AS_NEEDED=1 [ 29s] + export LD_AS_NEEDED [ 29s] + make tmpls [ 29s] cd kickstart; make [ 29s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/kickstarter-0.15/kickstart' [ 29s] cheetah compile --settings='useStackFrames=False' kickstart.tmpl [ 29s] Compiling kickstart.tmpl -> kickstart.py [ 29s] cp kickstart.py __init__.py [ 29s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/kickstarter-0.15/kickstart' [ 29s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 29s] + /usr/bin/python setup.py build [ 29s] running build [ 29s] running build_py [ 29s] creating build [ 29s] creating build/lib [ 29s] creating build/lib/kickstart [ 29s] copying kickstart/kickstart.py -> build/lib/kickstart [ 29s] copying kickstart/__init__.py -> build/lib/kickstart [ 29s] running build_scripts [ 29s] creating build/scripts-2.7 [ 29s] copying and adjusting tools/kickstarter -> build/scripts-2.7 [ 29s] changing mode of build/scripts-2.7/kickstarter from 644 to 755 [ 29s] + exit 0 [ 29s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.AsrfhA [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd kickstarter-0.15 [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] + /usr/bin/python setup.py install --root=/home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 -O1 --prefix=/usr [ 29s] running install [ 29s] running build [ 29s] running build_py [ 29s] copying kickstart/kickstart.py -> build/lib/kickstart [ 29s] copying kickstart/__init__.py -> build/lib/kickstart [ 29s] running build_scripts [ 29s] running install_lib [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7 [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstart [ 29s] copying build/lib/kickstart/kickstart.py -> /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstart [ 29s] copying build/lib/kickstart/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstart [ 29s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstart/kickstart.py to kickstart.pyc [ 29s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstart/__init__.py to __init__.pyc [ 29s] writing byte-compilation script '/tmp/tmpKLxjqm.py' [ 29s] /usr/bin/python -O /tmp/tmpKLxjqm.py [ 29s] removing /tmp/tmpKLxjqm.py [ 29s] running install_scripts [ 29s] creating /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/bin [ 29s] copying build/scripts-2.7/kickstarter -> /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/bin [ 29s] changing mode of /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/bin/kickstarter to 755 [ 29s] running install_egg_info [ 29s] Writing /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386/usr/lib/python2.7/site-packages/kickstarter-0.1-py2.7.egg-info [ 29s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/kickstarter-0.15 [ 29s] + /usr/lib/rpm/check-buildroot [ 29s] + /usr/lib/rpm//brp-compress [ 29s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 29s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 29s] + /usr/lib/rpm/brp-python-hardlink [ 29s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] Processing files: kickstarter-0.15-2.4.noarch [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 29s] Requires: /usr/bin/python python(abi) = 2.7 [ 29s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] Wrote: /home/abuild/rpmbuild/SRPMS/kickstarter-0.15-2.4.src.rpm [ 29s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/kickstarter-0.15-2.4.noarch.rpm [ 29s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gfD50o [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd kickstarter-0.15 [ 29s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/kickstarter-0.15-2.4.i386 [ 29s] + exit 0 [ 29s] ... checking for files with abuild user/group [ 30s] ... creating baselibs [ 30s] ... comparing built packages with the former built [ 30s] /usr/lib/build/rpm-check.sh [ 30s] compare /.build.oldpackages/kickstarter-0.15-2.3.src.rpm /home/abuild/rpmbuild/SRPMS/kickstarter-0.15-2.4.src.rpm [ 30s] compare /.build.oldpackages/kickstarter-0.15-2.3.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/kickstarter-0.15-2.4.noarch.rpm [ 30s] /usr/lib/python2.7/site-packages/kickstart/__init__.py differs ( a python script text executable) [ 30s] --- old//usr/lib/python2.7/site-packages/kickstart/__init__.py 2016-04-14 09:29:38.000000000 +0000 [ 30s] +++ new//usr/lib/python2.7/site-packages/kickstart/__init__.py 2016-05-30 10:23:46.000000000 +0000 [ 30s] @@ -32,8 +32,8 @@ [ 30s] currentTime=time.time [ 30s] __CHEETAH_version__ = '2.4.4' [ 30s] __CHEETAH_versionTuple__ = (2, 4, 4, 'development', 0) [ 30s] -__CHEETAH_genTime__ = 1460626178.654062 [ 30s] -__CHEETAH_genTimestamp__ = 'Thu Apr 14 09:29:38 2016' [ 30s] +__CHEETAH_genTime__ = 1464603826.834728 [ 30s] +__CHEETAH_genTimestamp__ = 'Mon May 30 10:23:46 2016' [ 30s] __CHEETAH_src__ = 'kickstart.tmpl' [ 30s] __CHEETAH_srcLastModified__ = 'Tue Sep 8 17:37:34 2015' [ 30s] __CHEETAH_docstring__ = 'Autogenerated by Cheetah: The Python-Powered Template Engine' [ 30s] ... saving built statistics [ 30s] /.build/build: line 3148: mount: command not found [ 31s] ERROR: no root disk device found, yet another new device name? [ 31s] ls: cannot access /sys/block/: No such file or directory [ 31s] /.build/build: line 3163: umount: command not found [ 31s] ... saving built packages [ 31s] /home/abuild/rpmbuild/RPMS/noarch/kickstarter-0.15-2.4.noarch.rpm [ 31s] /home/abuild/rpmbuild/SRPMS/kickstarter-0.15-2.4.src.rpm [ 32s] /home/abuild/rpmbuild/OTHER/_statistics [ 32s] [ 32s] w22 finished "build kickstarter.spec" at Mon May 30 10:23:50 UTC 2016. [ 32s] [ 39s] [ 28.975218] SysRq : Power Off [ 39s] [ 29.084398] Power down. [ 40s] build: extracting built packages... [ 40s] kickstarter-0.15-2.4.noarch.rpm [ 40s] kickstarter-0.15-2.4.src.rpm [ 40s] _statistics