[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w08 started "build _service:gbs:kpartx.spec" at Tue Sep 15 12:43:14 UTC 2015. [ 0s] [ 0s] Building kpartx for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 'd95afa1aeb18c6a9c5ab8628e7950ffa' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:kpartx.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:kpartx.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:kpartx.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 2s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 16000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 8 [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4055/4194304 files, 300845/16777216 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/_service:gbs:kpartx.spec ... [ 7s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:kpartx.spec build rpmlint-Factory ... [ 7s] initializing rpm db... [ 7s] [1/105] installing cloog-0.16.1-2.1 [ 7s] [2/105] installing emulator-kernel-user-headers-3.12.18-3.4 [ 7s] [3/105] installing tizen-release-2.2.0-2.1 [ 7s] [4/105] installing tzdata-2013h-3.1 [ 7s] [5/105] installing libgcc-4.6.4-3.10 [ 7s] [6/105] installing setup-0.1-3.1 [ 7s] [7/105] installing filesystem-0.1-3.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/105] installing eglibc-2.13-2.3 [ 7s] [9/105] installing libstdc++-4.6.4-3.10 [ 7s] [10/105] installing bzip2-libs-1.0.5-2.1 [ 7s] [11/105] installing cpio-2.8-3.2 [ 7s] [12/105] installing device-mapper-libs-1.02.28-2.1 [ 7s] [13/105] installing e2fsprogs-libs-1.41.9-3.2 [ 7s] [14/105] installing elfutils-libelf-0.152-2.4 [ 8s] [15/105] installing findutils-4.2.31-3.1 [ 8s] [16/105] installing gdbm-1.8.3-2.1 [ 8s] [17/105] installing libattr-2.4.44-2.2 [ 8s] [18/105] installing liblua-5.1.4-2.1 [ 8s] [19/105] installing libstdc++-devel-4.6.4-3.10 [ 8s] [20/105] installing libuuid-2.20.2-3.2 [ 8s] [21/105] installing lzo-2.03-2.1 [ 8s] [22/105] installing m4-1.4.14-2.1 [ 8s] [23/105] installing net-tools-1.60-3.3 [ 8s] [24/105] installing nspr-4.9-2.3 [ 8s] [25/105] installing nss-softokn-freebl-3.12.9-2.5 [ 8s] [26/105] installing pkg-config-0.25-2.1 [ 8s] [27/105] installing popt-1.16-2.1 [ 8s] [28/105] installing readline-5.2-2.1 [ 8s] [29/105] installing sed-4.1.5-3.1 [ 8s] [30/105] installing sqlite-3.7.13-2.1 [ 8s] [31/105] installing tar-1.17-3.2 [ 8s] [32/105] installing xz-libs-5.0.3-2.1 [ 8s] [33/105] installing zlib-1.2.5-2.4 [ 8s] [34/105] installing bash-4.1-3.1 [ 8s] [35/105] installing diffutils-3.0-3.1 [ 8s] [36/105] installing libgomp-4.6.4-3.10 [ 8s] [37/105] installing patch-2.6-3.1 [ 8s] [38/105] installing gmp-4.2.1-2.1 [ 8s] [39/105] installing libpcre-7.7-2.1 [ 8s] [40/105] installing ncurses-libs-5.7-2.1 [ 8s] [41/105] installing build-compare-2009.10.14-3.4 [ 8s] [42/105] installing device-mapper-1.02.28-2.1 [ 8s] [43/105] installing eglibc-headers-2.13-2.3 [ 9s] [44/105] installing grep-2.5.1a-2.1 [ 9s] [45/105] installing libacl-2.2.49-3.1 [ 9s] [46/105] installing libcap-2.21-2.1 [ 9s] [47/105] installing libfile-5.04-2.1 [ 9s] [48/105] installing lzo-minilzo-2.03-2.1 [ 9s] [49/105] installing make-3.82-3.1 [ 9s] [50/105] installing mpfr-3.0.0-2.1 [ 9s] [51/105] installing ncurses-5.7-2.1 [ 9s] [52/105] installing unzip-6.0-2.3 [ 9s] [53/105] installing zlib-devel-1.2.5-2.4 [ 9s] [54/105] installing bzip2-1.0.5-2.1 [ 9s] [55/105] installing libblkid-2.20.2-3.2 [ 9s] [56/105] installing xz-5.0.3-2.1 [ 9s] [57/105] installing binutils-2.22-2.1 [ 10s] [58/105] installing elfutils-libs-0.152-2.4 [ 10s] [59/105] installing ppl-0.11.2-2.1 [ 10s] [60/105] installing nss-3.12.9-2.5 [ 11s] [61/105] installing perl-5.12.1-2.1 [ 13s] [62/105] installing ncurses-base-5.7-2.1 [ 14s] [63/105] installing perl-HTML-Tagset-3.20-3.1 [ 14s] [64/105] installing perl-IO-Compress-Base-2.008-2.1 [ 14s] [65/105] installing perl-Module-Pluggable-3.60-2.1 [ 14s] [66/105] installing perl-Pod-Escapes-1.04-2.1 [ 14s] [67/105] installing perl-TimeDate-1.20-3.1 [ 14s] [68/105] installing eglibc-devel-2.13-2.3 [ 14s] [69/105] installing file-5.04-2.1 [ 14s] [70/105] installing perl-Compress-Raw-Zlib-2.008-2.1 [ 14s] [71/105] installing perl-libs-5.12.1-2.1 [ 15s] [72/105] installing coreutils-6.9-3.3 [ 15s] [73/105] installing device-mapper-devel-1.02.28-2.1 [ 15s] [74/105] installing libmount-2.20.2-3.2 [ 15s] [75/105] installing lzo-devel-2.03-2.1 [ 15s] [76/105] installing mpc-0.9-2.1 [ 15s] [77/105] installing perl-devel-5.12.1-2.1 [ 15s] [78/105] installing xz-lzma-compat-5.0.3-2.1 [ 15s] [79/105] installing cloog-ppl-0.16.1-2.1 [ 15s] [80/105] installing ncurses-devel-5.7-2.1 [ 15s] [81/105] installing nss-sysinit-3.12.9-2.5 [ 15s] [82/105] installing ppl-pwl-0.11.2-2.1 [ 15s] [83/105] installing elfutils-0.152-2.4 [ 15s] [84/105] installing eglibc-common-2.13-2.3 [ 16s] [85/105] installing rpm-libs-4.9.1-2.1 [ 16s] [86/105] installing perl-ExtUtils-ParseXS-2.18-2.1 [ 16s] [87/105] installing perl-Pod-Simple-3.07-2.1 [ 16s] [88/105] installing perl-Test-Simple-0.80-2.1 [ 16s] [89/105] installing readline-devel-5.2-2.1 [ 16s] [90/105] installing gawk-3.1.5-2.1 [ 16s] [91/105] installing gzip-1.3.12-2.1 [ 16s] [92/105] installing perl-IO-Compress-Zlib-2.008-2.1 [ 16s] [93/105] installing perl-Test-Harness-3.12-2.1 [ 17s] [94/105] installing rpm-4.9.1-2.1 [ 17s] [95/105] installing build-2011.01.10a-2.1 [ 17s] [96/105] installing util-linux-2.20.2-3.2 [ 17s] [97/105] installing cpp-4.6.4-3.10 [ 18s] [98/105] installing perl-ExtUtils-MakeMaker-6.36-2.1 [ 18s] [99/105] installing gcc-4.6.4-3.10 [ 18s] [100/105] installing rpm-build-4.9.1-2.1 [ 18s] [101/105] installing perl-CPAN-1.9205-2.1 [ 18s] [102/105] installing autoconf-2.68-2.1 [ 19s] [103/105] installing gcc-c++-4.6.4-3.10 [ 19s] [104/105] installing automake-1.11.1-2.1 [ 19s] [105/105] installing libtool-2.2.6b-2.1 [ 19s] removing nis flags from //etc/nsswitch.conf... [ 19s] now finalizing build dir... [ 19s] /.build/build: line 2585: mount: command not found [ 19s] /.build/build: line 2586: mount: command not found [ 20s] ----------------------------------------------------------------- [ 20s] I have the following modifications for kpartx.spec: [ 20s] 5c5 [ 20s] < Release: 7 [ 20s] --- [ 20s] > Release: 2.1 [ 20s] 49a50 [ 20s] > %changelog [ 20s] ----------------------------------------------------------------- [ 20s] ----- building kpartx.spec (user abuild) [ 20s] ----------------------------------------------------------------- [ 20s] ----------------------------------------------------------------- [ 20s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/d95afa1aeb18c6a9c5ab8628e7950ffa-kpartx' /home/abuild/rpmbuild/SOURCES/kpartx.spec [ 20s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.9QkfD0 [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + rm -rf multipath-tools-0.4.9 [ 20s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/multipath-tools-0.4.9.tar.bz2 [ 20s] + /bin/tar -xf - [ 20s] + STATUS=0 [ 20s] + '[' 0 -ne 0 ']' [ 20s] + cd multipath-tools-0.4.9 [ 20s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 20s] + echo 'Patch #0 (udev.patch):' [ 20s] Patch #0 (udev.patch): [ 20s] + /bin/cat /home/abuild/rpmbuild/SOURCES/udev.patch [ 20s] + /usr/bin/patch -s -p1 --fuzz=2 [ 20s] + exit 0 [ 20s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.igGfDR [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd multipath-tools-0.4.9 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 20s] + export CFLAGS [ 20s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 20s] + export CXXFLAGS [ 20s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 20s] + export FFLAGS [ 20s] + LD_AS_NEEDED=1 [ 20s] + export LD_AS_NEEDED [ 20s] + cd kpartx [ 20s] + make -j8 [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o bsd.o bsd.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o dos.o dos.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o kpartx.o kpartx.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o solaris.o solaris.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o unixware.o unixware.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o dasd.o dasd.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o sun.o sun.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o gpt.o gpt.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o mac.o mac.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o crc32.o crc32.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o lopart.o lopart.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o xstrncpy.o xstrncpy.c [ 20s] cc -pipe -g -Wall -Wunused -Wstrict-prototypes -fPIC -DLIB_STRING=\"lib\" -I. -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -c -o devmapper.o devmapper.c [ 20s] cc bsd.o dos.o kpartx.o solaris.o unixware.o dasd.o sun.o gpt.o mac.o crc32.o lopart.o xstrncpy.o devmapper.o -o kpartx -ldevmapper [ 20s] /bin/gzip -9 -c kpartx.8 > kpartx.8.gz [ 20s] + exit 0 [ 20s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.cotVUI [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd multipath-tools-0.4.9 [ 20s] + LANG=C [ 20s] + export LANG [ 20s] + unset DISPLAY [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/share/license [ 20s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/share/license/kpartx [ 20s] + cd kpartx [ 20s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 bindir=/sbin [ 20s] install -d /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/sbin [ 20s] install -m 755 kpartx /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/sbin [ 20s] install -d /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/lib/udev [ 20s] install -m 755 kpartx_id /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/lib/udev [ 20s] install -d /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/lib/udev/rules.d [ 20s] install -m 644 kpartx.rules /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/lib/udev/rules.d/ [ 20s] install -d /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/share/man/man8 [ 20s] install -m 644 kpartx.8.gz /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/usr/share/man/man8 [ 20s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/multipath-tools-0.4.9 [ 20s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386/sbin/kpartx [ 20s] 192 blocks [ 20s] + /usr/lib/rpm/check-buildroot [ 20s] + /usr/lib/rpm//brp-compress [ 20s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 20s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 20s] + /usr/lib/rpm/brp-python-hardlink [ 20s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] Processing files: kpartx-0.4.9-2.1.i586 [ 20s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 20s] Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.3) libdevmapper.so.1.02 libdevmapper.so.1.02(Base) [ 20s] Obsoletes: device-mapper-multipath [ 20s] Processing files: kpartx-debuginfo-0.4.9-2.1.i586 [ 20s] Processing files: kpartx-debugsource-0.4.9-2.1.i586 [ 20s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] Wrote: /home/abuild/rpmbuild/SRPMS/kpartx-0.4.9-2.1.src.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/kpartx-0.4.9-2.1.i586.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/kpartx-debuginfo-0.4.9-2.1.i586.rpm [ 20s] Wrote: /home/abuild/rpmbuild/RPMS/i586/kpartx-debugsource-0.4.9-2.1.i586.rpm [ 20s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.DkkMT3 [ 20s] + umask 022 [ 20s] + cd /home/abuild/rpmbuild/BUILD [ 20s] + cd multipath-tools-0.4.9 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kpartx-0.4.9-2.1.i386 [ 20s] + exit 0 [ 20s] ... checking for files with abuild user/group [ 21s] ... creating baselibs [ 21s] ... saving built statistics [ 21s] /.build/build: line 3144: mount: command not found [ 21s] ERROR: no root disk device found, yet another new device name? [ 21s] ls: cannot access /sys/block/: No such file or directory [ 21s] /.build/build: line 3159: umount: command not found [ 21s] ... saving built packages [ 21s] /home/abuild/rpmbuild/RPMS/i586/kpartx-0.4.9-2.1.i586.rpm [ 21s] /home/abuild/rpmbuild/RPMS/i586/kpartx-debuginfo-0.4.9-2.1.i586.rpm [ 21s] /home/abuild/rpmbuild/RPMS/i586/kpartx-debugsource-0.4.9-2.1.i586.rpm [ 21s] /home/abuild/rpmbuild/SRPMS/kpartx-0.4.9-2.1.src.rpm [ 21s] /home/abuild/rpmbuild/OTHER/_statistics [ 21s] [ 21s] w08 finished "build kpartx.spec" at Tue Sep 15 12:43:34 UTC 2015. [ 21s] [ 24s] [ 18.928494] SysRq : Power Off [ 24s] [ 19.044667] Power down. [ 24s] build: extracting built packages... [ 24s] kpartx-0.4.9-2.1.i586.rpm [ 24s] kpartx-debuginfo-0.4.9-2.1.i586.rpm [ 24s] kpartx-debugsource-0.4.9-2.1.i586.rpm [ 24s] kpartx-0.4.9-2.1.src.rpm [ 24s] _statistics Retried build at Tue Sep 15 06:17:50 2015 returned same result, skipped Retried build at Fri Sep 18 01:16:20 2015 returned same result, skipped Retried build at Thu Apr 14 02:09:35 2016 returned same result, skipped Retried build at Mon May 30 03:14:19 2016 returned same result, skipped