[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w23 started "build _service:gbs:linux-3.4-exynos3250.spec" at Sun Mar 6 22:15:10 UTC 2016. [ 0s] [ 0s] Building linux-3.4-exynos3250 for project 'Tizen:2.3.1:Wearable' repository 'emulator' arch 'i586' srcmd5 '2ccd497855fb0ba769a6e92aca100c27' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 2s] [29/31] preinstalling coreutils... [ 2s] [30/31] preinstalling rpm-libs... [ 2s] [31/31] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: ppl -> ppl-pwl [ 3s] breaking dependency ppl -> ppl-pwl [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm -> rpm-libs [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4068/2392064 files, 243880/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:linux-3.4-exynos3250.spec build rpmlint-Factory ... [ 7s] initializing rpm db... [ 7s] [1/111] installing cloog-0.16.1-2.1 [ 7s] [2/111] installing emulator-kernel-user-headers-3.12.18-2.2 [ 7s] [3/111] installing tizen-release-2.2.0-2.1 [ 7s] [4/111] installing tzdata-2014j-2.1 [ 7s] [5/111] installing libgcc-4.6.4-3.2 [ 7s] [6/111] installing setup-0.1-2.1 [ 7s] [7/111] installing filesystem-0.1-2.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/111] installing eglibc-2.13-2.5 [ 7s] [9/111] installing libstdc++-4.6.4-3.2 [ 7s] [10/111] installing bzip2-libs-1.0.5-2.1 [ 8s] [11/111] installing cpio-2.8-2.1 [ 8s] [12/111] installing db4-4.8.30-2.2 [ 8s] [13/111] installing e2fsprogs-libs-1.41.9-2.2 [ 8s] [14/111] installing elfutils-libelf-0.152-2.6 [ 8s] [15/111] installing findutils-4.2.31-2.1 [ 8s] [16/111] installing gdbm-1.8.3-2.1 [ 8s] [17/111] installing libattr-2.4.44-2.4 [ 8s] [18/111] installing liblua-5.1.4-2.1 [ 8s] [19/111] installing libstdc++-devel-4.6.4-3.2 [ 8s] [20/111] installing libuuid-2.20.2-2.1 [ 8s] [21/111] installing lzo-2.03-2.1 [ 8s] [22/111] installing m4-1.4.14-2.1 [ 8s] [23/111] installing net-tools-1.60-2.3 [ 8s] [24/111] installing nspr-4.9-2.5 [ 8s] [25/111] installing nss-softokn-freebl-3.12.9-2.8 [ 8s] [26/111] installing openssl-1.0.1p-2.3 [ 8s] [27/111] installing pkg-config-0.25-2.1 [ 8s] [28/111] installing popt-1.16-2.1 [ 8s] [29/111] installing readline-5.2-2.1 [ 8s] [30/111] installing sed-4.1.5-2.1 [ 8s] [31/111] installing sqlite-3.7.13-2.1 [ 8s] [32/111] installing tar-1.17-2.1 [ 9s] [33/111] installing xz-libs-5.0.3-2.1 [ 9s] [34/111] installing zlib-1.2.5-2.6 [ 9s] [35/111] installing bash-4.1-2.1 [ 9s] [36/111] installing diffutils-3.0-2.1 [ 9s] [37/111] installing libgomp-4.6.4-3.2 [ 9s] [38/111] installing patch-2.6-2.1 [ 9s] [39/111] installing gmp-4.2.1-2.1 [ 9s] [40/111] installing libpcre-7.7-2.1 [ 9s] [41/111] installing ncurses-libs-5.7-2.1 [ 9s] [42/111] installing build-compare-2009.10.14-2.3 [ 9s] [43/111] installing elfutils-libelf-devel-0.152-2.6 [ 9s] [44/111] installing eglibc-headers-2.13-2.5 [ 9s] [45/111] installing grep-2.5.1a-2.1 [ 9s] [46/111] installing libacl-2.2.49-2.1 [ 9s] [47/111] installing libcap-2.21-2.1 [ 9s] [48/111] installing libfile-5.04-2.1 [ 9s] [49/111] installing libpython-2.7.1-2.4 [ 9s] [50/111] installing lzo-minilzo-2.03-2.1 [ 9s] [51/111] installing lzop-1.03-2.3 [ 9s] [52/111] installing make-3.82-2.1 [ 9s] [53/111] installing mpfr-3.0.0-2.1 [ 9s] [54/111] installing ncurses-5.7-2.1 [ 9s] [55/111] installing unzip-6.0-2.5 [ 10s] [56/111] installing zlib-devel-1.2.5-2.6 [ 10s] [57/111] installing bzip2-1.0.5-2.1 [ 10s] [58/111] installing kmod-libs-15-2.1 [ 10s] [59/111] installing libblkid-2.20.2-2.1 [ 10s] [60/111] installing xz-5.0.3-2.1 [ 10s] [61/111] installing binutils-2.22-2.3 [ 10s] [62/111] installing elfutils-libs-0.152-2.6 [ 10s] [63/111] installing ppl-0.11.2-2.1 [ 10s] [64/111] installing nss-3.12.9-2.8 [ 10s] [65/111] installing perl-5.12.1-2.4 [ 11s] [66/111] installing ncurses-base-5.7-2.1 [ 11s] [67/111] installing perl-HTML-Tagset-3.20-2.1 [ 11s] [68/111] installing perl-IO-Compress-Base-2.008-2.4 [ 11s] [69/111] installing perl-Module-Pluggable-3.60-2.4 [ 11s] [70/111] installing perl-Pod-Escapes-1.04-2.4 [ 11s] [71/111] installing perl-TimeDate-1.20-2.1 [ 11s] [72/111] installing binutils-devel-2.22-2.3 [ 11s] [73/111] installing eglibc-devel-2.13-2.5 [ 11s] [74/111] installing elfutils-devel-0.152-2.6 [ 11s] [75/111] installing file-5.04-2.1 [ 11s] [76/111] installing perl-Compress-Raw-Zlib-2.008-2.4 [ 11s] [77/111] installing perl-libs-5.12.1-2.4 [ 11s] [78/111] installing coreutils-6.9-2.2 [ 11s] [79/111] installing libmount-2.20.2-2.1 [ 11s] [80/111] installing lzo-devel-2.03-2.1 [ 11s] [81/111] installing mpc-0.9-2.1 [ 11s] [82/111] installing perl-devel-5.12.1-2.4 [ 12s] [83/111] installing xz-lzma-compat-5.0.3-2.1 [ 12s] [84/111] installing cloog-ppl-0.16.1-2.1 [ 12s] [85/111] installing nss-sysinit-3.12.9-2.8 [ 12s] [86/111] installing ppl-pwl-0.11.2-2.1 [ 12s] [87/111] installing python-base-2.7.1-2.4 [ 12s] [88/111] installing elfutils-0.152-2.6 [ 12s] [89/111] installing kmod-15-2.1 [ 12s] [90/111] installing eglibc-common-2.13-2.5 [ 12s] [91/111] installing rpm-libs-4.9.1-2.1 [ 12s] [92/111] installing perl-ExtUtils-ParseXS-2.18-2.4 [ 12s] [93/111] installing perl-Pod-Simple-3.07-2.4 [ 12s] [94/111] installing perl-Test-Simple-0.80-2.4 [ 12s] [95/111] installing gawk-3.1.5-2.4 [ 12s] [96/111] installing gzip-1.3.12-2.1 [ 12s] [97/111] installing perl-IO-Compress-Zlib-2.008-2.4 [ 13s] [98/111] installing perl-Test-Harness-3.12-2.4 [ 13s] [99/111] installing rpm-4.9.1-2.1 [ 13s] [100/111] installing build-2011.01.10a-2.1 [ 13s] [101/111] installing util-linux-2.20.2-2.1 [ 13s] [102/111] installing cpp-4.6.4-3.2 [ 13s] [103/111] installing python-2.7.1-2.2 [ 13s] [104/111] installing perl-ExtUtils-MakeMaker-6.36-2.4 [ 13s] [105/111] installing gcc-4.6.4-3.2 [ 14s] [106/111] installing rpm-build-4.9.1-2.1 [ 14s] [107/111] installing perl-CPAN-1.9205-2.4 [ 14s] [108/111] installing autoconf-2.68-2.1 [ 14s] [109/111] installing gcc-c++-4.6.4-3.2 [ 14s] [110/111] installing automake-1.11.1-2.1 [ 14s] [111/111] installing libtool-2.2.6b-2.1 [ 14s] removing nis flags from //etc/nsswitch.conf... [ 14s] now finalizing build dir... [ 14s] /.build/build: line 2585: mount: command not found [ 14s] /.build/build: line 2586: mount: command not found [ 14s] ----------------------------------------------------------------- [ 14s] I have the following modifications for linux-3.4-exynos3250.spec: [ 14s] 8c8 [ 14s] < Release: 1 [ 14s] --- [ 14s] > Release: 3.1 [ 14s] ----------------------------------------------------------------- [ 14s] ----- building linux-3.4-exynos3250.spec (user abuild) [ 14s] ----------------------------------------------------------------- [ 14s] ----------------------------------------------------------------- [ 14s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/2ccd497855fb0ba769a6e92aca100c27-linux-3.4-exynos3250' /home/abuild/rpmbuild/SOURCES/linux-3.4-exynos3250.spec [ 14s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.o2OvI1 [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + LANG=C [ 14s] + export LANG [ 14s] + unset DISPLAY [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + rm -rf linux-3.4-exynos3250-1.0.0 [ 14s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/linux-3.4-exynos3250-1.0.0.tar.gz [ 14s] + /bin/tar -xf - [ 19s] + STATUS=0 [ 19s] + '[' 0 -ne 0 ']' [ 19s] + cd linux-3.4-exynos3250-1.0.0 [ 19s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 19s] + exit 0 [ 19s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.M90THX [ 19s] + umask 022 [ 19s] + cd /home/abuild/rpmbuild/BUILD [ 19s] + cd linux-3.4-exynos3250-1.0.0 [ 19s] + LANG=C [ 19s] + export LANG [ 19s] + unset DISPLAY [ 19s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 19s] + export CFLAGS [ 19s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 19s] + export CXXFLAGS [ 19s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 19s] + export FFLAGS [ 19s] + LD_AS_NEEDED=1 [ 19s] + export LD_AS_NEEDED [ 19s] + exit 0 [ 19s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yns8IT [ 19s] + umask 022 [ 19s] + cd /home/abuild/rpmbuild/BUILD [ 19s] + cd linux-3.4-exynos3250-1.0.0 [ 19s] + LANG=C [ 19s] + export LANG [ 19s] + unset DISPLAY [ 19s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 19s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 19s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr [ 19s] + make mrproper [ 21s] + make headers_check [ 21s] CHK include/linux/version.h [ 21s] UPD include/linux/version.h [ 21s] HOSTCC scripts/basic/fixdep [ 21s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_32.h [ 21s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_64.h [ 21s] SYSHDR arch/x86/syscalls/../include/generated/asm/unistd_x32.h [ 21s] SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h [ 21s] HOSTCC arch/x86/tools/relocs [ 22s] HOSTCC scripts/unifdef [ 22s] INSTALL include/asm-generic (34 files) [ 22s] INSTALL include/drm (15 files) [ 22s] INSTALL include/linux/byteorder (2 files) [ 22s] INSTALL include/linux/caif (2 files) [ 22s] INSTALL include/linux/can (5 files) [ 22s] INSTALL include/linux/dvb (8 files) [ 22s] INSTALL include/linux/hdlc (1 file) [ 22s] INSTALL include/linux/hsi (1 file) [ 22s] INSTALL include/linux/isdn (1 file) [ 22s] INSTALL include/linux/mmc (1 file) [ 22s] INSTALL include/linux/netfilter/ipset (4 files) [ 22s] INSTALL include/linux/netfilter (75 files) [ 23s] INSTALL include/linux/netfilter_arp (2 files) [ 23s] INSTALL include/linux/netfilter_bridge (18 files) [ 23s] INSTALL include/linux/netfilter_ipv4 (12 files) [ 23s] INSTALL include/linux/netfilter_ipv6 (11 files) [ 23s] INSTALL include/linux/nfsd (5 files) [ 23s] INSTALL include/linux/raid (2 files) [ 23s] INSTALL include/linux/spi (1 file) [ 23s] INSTALL include/linux/sunrpc (1 file) [ 23s] INSTALL include/linux/tc_act (7 files) [ 23s] INSTALL include/linux/tc_ematch (4 files) [ 23s] INSTALL include/linux/usb (10 files) [ 23s] INSTALL include/linux/wimax (1 file) [ 23s] INSTALL include/linux (380 files) [ 24s] INSTALL include/mtd (5 files) [ 24s] INSTALL include/rdma (6 files) [ 24s] INSTALL include/scsi/fc (4 files) [ 24s] INSTALL include/scsi (3 files) [ 24s] INSTALL include/sound (10 files) [ 24s] INSTALL include/video (3 files) [ 24s] INSTALL include/xen (2 files) [ 24s] INSTALL include (0 file) [ 24s] INSTALL include/asm (58 files) [ 24s] CHECK include/asm-generic (34 files) [ 24s] CHECK include/drm (15 files) [ 25s] CHECK include/linux/byteorder (2 files) [ 25s] CHECK include/linux/caif (2 files) [ 25s] CHECK include/linux/can (5 files) [ 25s] CHECK include/linux/dvb (8 files) [ 25s] CHECK include/linux/hdlc (1 files) [ 25s] CHECK include/linux/hsi (1 files) [ 25s] CHECK include/linux/isdn (1 files) [ 25s] CHECK include/linux/mmc (1 files) [ 25s] CHECK include/linux/netfilter/ipset (4 files) [ 25s] CHECK include/linux/netfilter (75 files) [ 25s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/netfilter/xt_socket.h:14: userspace cannot reference function or variable defined in the kernel [ 25s] CHECK include/linux/netfilter_arp (2 files) [ 25s] CHECK include/linux/netfilter_bridge (18 files) [ 25s] CHECK include/linux/netfilter_ipv4 (12 files) [ 25s] CHECK include/linux/netfilter_ipv6 (11 files) [ 25s] CHECK include/linux/nfsd (5 files) [ 25s] CHECK include/linux/raid (2 files) [ 25s] CHECK include/linux/spi (1 files) [ 25s] CHECK include/linux/sunrpc (1 files) [ 25s] CHECK include/linux/tc_act (7 files) [ 25s] CHECK include/linux/tc_ematch (4 files) [ 25s] CHECK include/linux/usb (10 files) [ 25s] CHECK include/linux/wimax (1 files) [ 25s] CHECK include/linux (380 files) [ 25s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/compiler.h:24: userspace cannot reference function or variable defined in the kernel [ 25s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/compiler.h:25: userspace cannot reference function or variable defined in the kernel [ 25s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/soundcard.h:1054: userspace cannot reference function or variable defined in the kernel [ 25s] /home/abuild/rpmbuild/BUILD/linux-3.4-exynos3250-1.0.0/usr/include/linux/videodev2_exynos_camera.h:1430: found __[us]{8,16,32,64} type without #include [ 25s] CHECK include/mtd (5 files) [ 25s] CHECK include/rdma (6 files) [ 25s] CHECK include/scsi/fc (4 files) [ 25s] CHECK include/scsi (3 files) [ 25s] CHECK include/sound (10 files) [ 25s] CHECK include/video (3 files) [ 25s] CHECK include/xen (2 files) [ 25s] CHECK include (0 files) [ 25s] CHECK include/asm (58 files) [ 25s] + make headers_install INSTALL_HDR_PATH=/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr [ 26s] CHK include/linux/version.h [ 26s] make[1]: Nothing to be done for `all'. [ 26s] make[1]: Nothing to be done for `relocs'. [ 26s] INSTALL include/asm-generic (34 files) [ 26s] INSTALL include/drm (15 files) [ 26s] INSTALL include/linux/byteorder (2 files) [ 26s] INSTALL include/linux/caif (2 files) [ 26s] INSTALL include/linux/can (5 files) [ 26s] INSTALL include/linux/dvb (8 files) [ 26s] INSTALL include/linux/hdlc (1 file) [ 26s] INSTALL include/linux/hsi (1 file) [ 26s] INSTALL include/linux/isdn (1 file) [ 26s] INSTALL include/linux/mmc (1 file) [ 26s] INSTALL include/linux/netfilter/ipset (4 files) [ 26s] INSTALL include/linux/netfilter (75 files) [ 26s] INSTALL include/linux/netfilter_arp (2 files) [ 26s] INSTALL include/linux/netfilter_bridge (18 files) [ 26s] INSTALL include/linux/netfilter_ipv4 (12 files) [ 26s] INSTALL include/linux/netfilter_ipv6 (11 files) [ 27s] INSTALL include/linux/nfsd (5 files) [ 27s] INSTALL include/linux/raid (2 files) [ 27s] INSTALL include/linux/spi (1 file) [ 27s] INSTALL include/linux/sunrpc (1 file) [ 27s] INSTALL include/linux/tc_act (7 files) [ 27s] INSTALL include/linux/tc_ematch (4 files) [ 27s] INSTALL include/linux/usb (10 files) [ 27s] INSTALL include/linux/wimax (1 file) [ 27s] INSTALL include/linux (380 files) [ 28s] INSTALL include/mtd (5 files) [ 28s] INSTALL include/rdma (6 files) [ 28s] INSTALL include/scsi/fc (4 files) [ 28s] INSTALL include/scsi (3 files) [ 28s] INSTALL include/sound (10 files) [ 28s] INSTALL include/video (3 files) [ 28s] INSTALL include/xen (2 files) [ 28s] INSTALL include (0 file) [ 28s] INSTALL include/asm (58 files) [ 28s] + find /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include -name .install [ 28s] + xargs rm -f [ 28s] + xargs rm -f [ 28s] + find /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include -name ..install.cmd [ 28s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/scsi [ 28s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/asm*/atomic.h' [ 28s] + rm -f '/home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/include/asm*/io.h' [ 28s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386/usr/share/license [ 28s] + /usr/lib/rpm/brp-compress [ 28s] Processing files: kernel-headers-3.4-exynos3250-1.0.0-3.1.i586 [ 29s] Provides: kernel-headers [ 29s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 30s] Obsoletes: kernel-headers [ 30s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 36s] Wrote: /home/abuild/rpmbuild/SRPMS/linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/i586/kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 36s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.wpfsoq [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd linux-3.4-exynos3250-1.0.0 [ 36s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/linux-3.4-exynos3250-1.0.0-3.1.i386 [ 36s] + rm -rf /home/abuild/rpmbuild/BUILD [ 36s] + exit 0 [ 36s] ... checking for files with abuild user/group [ 36s] ... creating baselibs [ 36s] ... comparing built packages with the former built [ 36s] /usr/lib/build/rpm-check.sh [ 36s] compare /.build.oldpackages/linux-3.4-exynos3250-1.0.0-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 36s] --- /tmp/tmp.C1dWb4lcex 2016-03-06 22:15:46.218501364 +0000 [ 36s] +++ /tmp/tmp.IrdKkM4d1F 2016-03-06 22:15:46.226501365 +0000 [ 36s] @@ -1,7 +1,7 @@ [ 36s] linux-3.4-exynos3250 1.0.0 (none) [ 36s] The Linux Kernel [ 36s] The Linux Kernel, the operating system core itself [ 36s] - The Linux Community Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/738cd2054718c4ec3dcd162e27f72154-linux-3.4-exynos3250 GPL GPL [ 36s] + The Linux Community Tizen:2.3.1:Wearable / emulator obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator/2ccd497855fb0ba769a6e92aca100c27-linux-3.4-exynos3250 GPL GPL [ 36s] System Environment/Kernel http://www.kernel.org (none) (none) armv3l [ 36s] (none) 4.9.1 (none) [ 36s] cpio gzip 9 [ 36s] ... saving built statistics [ 36s] /.build/build: line 3144: mount: command not found [ 37s] ERROR: no root disk device found, yet another new device name? [ 37s] ls: cannot access /sys/block/: No such file or directory [ 37s] /.build/build: line 3159: umount: command not found [ 37s] ... saving built packages [ 37s] /home/abuild/rpmbuild/RPMS/i586/kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 37s] /home/abuild/rpmbuild/SRPMS/linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 37s] /home/abuild/rpmbuild/OTHER/_statistics [ 37s] [ 37s] w23 finished "build linux-3.4-exynos3250.spec" at Sun Mar 6 22:15:46 UTC 2016. [ 37s] [ 40s] [ 34.663000] SysRq : Power Off [ 40s] [ 34.673420] Power down. [ 40s] build: extracting built packages... [ 40s] kernel-headers-3.4-exynos3250-1.0.0-3.1.i586.rpm [ 40s] linux-3.4-exynos3250-1.0.0-3.1.src.rpm [ 40s] _statistics Retried build at Thu Apr 14 02:27:27 2016 returned same result, skipped Retried build at Mon May 30 03:23:51 2016 returned same result, skipped