[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w29 started "build _service:gbs:libcamsrcjpegenc-sw-libjpeg.spec" at Mon May 30 17:43:05 UTC 2016. [ 0s] [ 0s] Building libcamsrcjpegenc-sw-libjpeg for project 'Tizen:2.3.1:Wearable' repository 'target' arch 'armv7l' srcmd5 '49d511a96806283a1a1bfec4bf70bed4' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec build rpmlint-Factory ... [ 0s] registering binfmt handlers for VM [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 41: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 44: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 45: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 48: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 51: echo: write error: Invalid argument [ 0s] Please check cpu value and header information for m68k! [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 55: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 59: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 60: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 61: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 62: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 63: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 64: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 67: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 68: echo: write error: Invalid argument [ 0s] /usr/sbin/qemu-binfmt-conf.sh: line 71: echo: write error: Invalid argument [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: eglibc -> eglibc-common -> bash [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 2s] breaking dependency coreutils -> bash [ 2s] cycle: eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: libgcc -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: libgcc -> eglibc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: rpm-libs -> rpm [ 2s] breaking dependency rpm-libs -> rpm [ 2s] [1/57] preinstalling tizen-release... [ 2s] [2/57] preinstalling libgcc... [ 2s] [3/57] preinstalling setup... [ 2s] [4/57] preinstalling filesystem... [ 3s] [5/57] preinstalling eglibc... [ 3s] [6/57] preinstalling eglibc-common... [ 3s] [7/57] preinstalling bash... [ 3s] [8/57] preinstalling bzip2-libs... [ 4s] [9/57] preinstalling diffutils... [ 4s] [10/57] preinstalling elfutils-libelf... [ 4s] [11/57] preinstalling libattr... [ 4s] [12/57] preinstalling liblua... [ 4s] [13/57] preinstalling libstdc++... [ 4s] [14/57] preinstalling ncurses-libs... [ 4s] [15/57] preinstalling nspr... [ 4s] [16/57] preinstalling nss-softokn-freebl... [ 4s] [17/57] preinstalling popt... [ 4s] [18/57] preinstalling readline... [ 4s] [19/57] preinstalling sed... [ 4s] [20/57] preinstalling sqlite... [ 4s] [21/57] preinstalling tar... [ 4s] [22/57] preinstalling xz-libs... [ 4s] [23/57] preinstalling zlib... [ 4s] [24/57] preinstalling qemu.x86_64... [ 4s] [25/57] preinstalling libcap... [ 4s] [26/57] preinstalling libacl... [ 4s] [27/57] preinstalling libfile... [ 4s] [28/57] preinstalling bzip2... [ 4s] [29/57] preinstalling nss... [ 4s] [30/57] preinstalling file... [ 5s] [31/57] preinstalling coreutils... [ 5s] [32/57] preinstalling rpm-libs... [ 5s] [33/57] preinstalling tizen-accelerator... [ 5s] [34/57] preinstalling rpm... [ 5s] [35/57] preinstalling gmp-x86-arm... [ 5s] [36/57] preinstalling mpc-x86-arm... [ 5s] [37/57] preinstalling mpfr-x86-arm... [ 5s] [38/57] preinstalling bzip2-libs-x86-arm... [ 5s] [39/57] preinstalling eglibc-x86-arm... [ 5s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 5s] [41/57] preinstalling libacl-x86-arm... [ 5s] [42/57] preinstalling libattr-x86-arm... [ 5s] [43/57] preinstalling libcap-x86-arm... [ 5s] [44/57] preinstalling libfile-x86-arm... [ 5s] [45/57] preinstalling libgcc-x86-arm... [ 5s] [46/57] preinstalling liblua-x86-arm... [ 5s] [47/57] preinstalling ncurses-libs-x86-arm... [ 5s] [48/57] preinstalling nspr-x86-arm... [ 5s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 5s] [50/57] preinstalling nss-x86-arm... [ 5s] [51/57] preinstalling popt-x86-arm... [ 5s] [52/57] preinstalling rpm-libs-x86-arm... [ 5s] [53/57] preinstalling sqlite-x86-arm... [ 5s] [54/57] preinstalling xz-libs-x86-arm... [ 5s] [55/57] preinstalling zlib-x86-arm... [ 5s] [56/57] preinstalling bash-x86-arm... [ 5s] [57/57] preinstalling rpm-x86-arm... [ 5s] [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl-libs -> perl [ 5s] [1/8] preinstalling e2fsprogs-libs... [ 5s] [2/8] preinstalling libpcre... [ 5s] [3/8] preinstalling libuuid... [ 5s] [4/8] preinstalling grep... [ 5s] [5/8] preinstalling libblkid... [ 5s] [6/8] preinstalling util-linux... [ 5s] [7/8] preinstalling perl-libs... [ 6s] [8/8] preinstalling perl... [ 6s] copying packages... [ 7s] reordering...cycle: bash -> eglibc -> eglibc-common [ 7s] breaking dependency eglibc-common -> bash [ 7s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 7s] breaking dependency eglibc-common -> coreutils [ 7s] cycle: eglibc -> eglibc-common [ 7s] breaking dependency eglibc-common -> eglibc [ 7s] cycle: eglibc -> eglibc-common -> findutils [ 7s] breaking dependency eglibc-common -> findutils [ 7s] cycle: eglibc -> eglibc-common -> grep [ 7s] breaking dependency grep -> eglibc [ 7s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 7s] breaking dependency grep -> libgcc [ 7s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 7s] breaking dependency libpcre -> eglibc [ 7s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 7s] breaking dependency libpcre -> libgcc [ 7s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 7s] breaking dependency libstdc++ -> eglibc [ 7s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 7s] breaking dependency eglibc-common -> grep [ 7s] cycle: eglibc -> eglibc-common -> libgcc [ 7s] breaking dependency eglibc -> eglibc-common [ 7s] cycle: eglibc -> libgcc [ 7s] breaking dependency libgcc -> eglibc [ 7s] cycle: filesystem -> setup [ 7s] breaking dependency setup -> filesystem [ 7s] cycle: ncurses -> ncurses-libs [ 7s] breaking dependency ncurses-libs -> ncurses [ 7s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 7s] breaking dependency ncurses-libs -> ncurses-base [ 7s] cycle: perl -> perl-libs [ 7s] breaking dependency perl -> perl-libs [ 7s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 7s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 7s] cycle: perl -> perl-IO-Compress-Zlib [ 7s] breaking dependency perl -> perl-IO-Compress-Zlib [ 7s] cycle: perl -> perl-IO-Compress-Base [ 7s] breaking dependency perl -> perl-IO-Compress-Base [ 7s] cycle: perl -> perl-Module-Pluggable [ 7s] breaking dependency perl -> perl-Module-Pluggable [ 7s] cycle: perl -> perl-Pod-Simple [ 7s] breaking dependency perl -> perl-Pod-Simple [ 7s] cycle: dbus -> dbus-libs [ 7s] breaking dependency dbus -> dbus-libs [ 7s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 7s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 7s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 7s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 7s] cycle: nss -> nss-sysinit [ 7s] breaking dependency nss -> nss-sysinit [ 7s] cycle: perl-CPAN -> perl-Test-Harness [ 7s] breaking dependency perl-Test-Harness -> perl-CPAN [ 7s] cycle: rpm-libs -> rpm [ 7s] breaking dependency rpm-libs -> rpm [ 7s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 7s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 7s] cycle: libsensord -> sensord [ 7s] breaking dependency libsensord -> sensord [ 7s] done [ 16s] booting kvm ... [ 16s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 6000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 23s] doing fast boot [ 24s] Creating device nodes with udev [ 28s] Waiting for device /dev/vda to appear: ok [ 28s] fsck from util-linux 2.21.2 [ 28s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 28s] /dev/vda: clean, 4894/2392064 files, 244312/9568256 blocks [ 28s] fsck succeeded. Mounting root device read-write. [ 28s] Mounting root /dev/vda [ 28s] mount -o rw -t ext4 /dev/vda /root [ 31s] replacing /etc/mtab with symlink to /proc/self/mounts [ 34s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 54s] 2nd stage started in virtual machine [ 54s] machine type: armv7l [ 54s] switching personality to 8... [ 54s] 2nd stage started in virtual machine [ 54s] machine type: armv7l [ 54s] /.build/build: line 770: mount: command not found [ 55s] swapon on /dev/vdb [ 55s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 55s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 56s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 57s] logging output to //.build.log... [ 57s] processing specfile /.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec ... [ 57s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec build rpmlint-Factory ... [ 78s] running rpm-x86-arm postinstall script [ 79s] running rpm-libs-x86-arm postinstall script [ 81s] running tizen-accelerator postinstall script [ 83s] running bash-x86-arm postinstall script [ 84s] initializing rpm db... [ 98s] [1/246] installing cross-armv7l-platformfile-0.0.1-2.1 [ 99s] [2/246] installing kernel-headers-3.4-exynos3250-1.0.0-3.3 [ 101s] [3/246] installing libX11-common-1.5.0-2.6 [ 102s] [4/246] installing tizen-release-2.2.0-2.1 [ 102s] [5/246] installing tzdata-2014j-2.1 [ 102s] [6/246] installing libgcc-4.6.4-3.13 [ 103s] [7/246] installing setup-0.1-2.1 [ 105s] [8/246] installing filesystem-0.1-2.1 [ 106s] warning: group lock does not exist - using root [ 106s] [9/246] installing eglibc-2.13-4.9 [ 109s] [10/246] installing libstdc++-4.6.4-3.13 [ 110s] [11/246] installing eglibc-common-2.13-4.9 [ 112s] [12/246] installing libstdc++-devel-4.6.4-3.13 [ 112s] [13/246] installing opengl-es-virtual-drv-0.1.6-2.8 [ 113s] [14/246] installing bash-4.1-2.2 [ 113s] [15/246] installing bzip2-libs-1.0.5-2.2 [ 113s] [16/246] installing c-ares-1.10.0_4-2.1 [ 113s] [17/246] installing capi-base-common-0.1.9-2.1 [ 113s] [18/246] installing cpio-2.8-2.2 [ 114s] [19/246] installing diffutils-3.0-2.2 [ 114s] [20/246] installing e2fsprogs-libs-1.41.9-2.6 [ 114s] [21/246] installing elfutils-libelf-0.152-2.18 [ 115s] [22/246] installing embryo-1.6.0+svn.76491slp2+build07-2.1 [ 115s] [23/246] installing expat-2.0.1-2.1 [ 115s] [24/246] installing fdupes-1.40-2.1 [ 115s] [25/246] installing findutils-4.2.31-2.2 [ 116s] [26/246] installing fribidi-0.19.6-2.1 [ 116s] [27/246] installing gdbm-1.8.3-2.1 [ 116s] [28/246] installing libXau-1.0.7-2.1 [ 116s] [29/246] installing libattr-2.4.44-2.9 [ 116s] [30/246] installing libdrm2-2.4.35-2.2 [ 117s] [31/246] installing libffi-3.0.9-2.1 [ 117s] [32/246] installing libgomp-4.6.4-3.13 [ 117s] [33/246] installing libidn-1.16-2.1 [ 117s] [34/246] installing libjpeg-turbo-1.2.0-2.5 [ 117s] [35/246] installing liblua-5.1.4-2.2 [ 117s] [36/246] installing libogg-1.2.1-2.1 [ 118s] [37/246] installing libuuid-2.20.2-2.2 [ 118s] [38/246] installing lzo-2.03-2.1 [ 118s] [39/246] installing m4-1.4.14-2.2 [ 118s] [40/246] installing net-tools-1.60-2.5 [ 118s] [41/246] installing nspr-4.9-2.14 [ 119s] [42/246] installing nss-softokn-freebl-3.12.9-2.20 [ 119s] [43/246] installing openssl-1.0.1s-3.4 [ 119s] [44/246] installing patch-2.6-2.2 [ 119s] [45/246] installing pixman-0.28.2-2.2 [ 120s] [46/246] installing pkg-config-0.25-2.2 [ 120s] [47/246] installing popt-1.16-2.1 [ 121s] [48/246] installing readline-5.2-2.2 [ 121s] [49/246] installing sed-4.1.5-2.1 [ 121s] [50/246] installing smack-1.0+s14-2.2 [ 121s] [51/246] installing sqlite-3.7.13-2.2 [ 121s] [52/246] installing systemd-libs-210-2.5 [ 121s] [53/246] installing tar-1.17-2.2 [ 121s] [54/246] installing xz-libs-5.0.3-2.2 [ 121s] [55/246] installing zlib-1.2.5-2.13 [ 122s] [56/246] installing gmp-4.2.1-2.1 [ 122s] [57/246] installing libpcre-7.7-2.2 [ 122s] [58/246] installing ncurses-libs-5.7-2.2 [ 122s] [59/246] installing build-compare-2009.10.14-2.8 [ 122s] [60/246] installing qemu.x86_64-1.2-2.1 [ 123s] [61/246] installing capi-base-common-devel-0.1.9-2.1 [ 124s] [62/246] installing eglibc-headers-2.13-4.9 [ 124s] [63/246] installing libcap-2.21-2.2 [ 124s] [64/246] installing libjpeg-turbo-devel-1.2.0-2.5 [ 124s] [65/246] installing unzip-6.0-2.13 [ 124s] [66/246] installing zlib-devel-1.2.5-2.13 [ 125s] [67/246] installing grep-2.5.1a-2.1 [ 125s] [68/246] installing libacl-2.2.49-2.2 [ 125s] [69/246] installing libfile-5.04-2.1 [ 125s] [70/246] installing libiri-1.7-2.1 [ 125s] [71/246] installing libpng-1.2.50-2.1 [ 126s] [72/246] installing libvorbis-1.2.3-2.1 [ 126s] [73/246] installing libxcb-1.8.1-2.1 [ 126s] [74/246] installing libxml2-2.7.8-2.2 [ 126s] [75/246] installing lzo-minilzo-2.03-2.1 [ 126s] [76/246] installing make-3.82-2.2 [ 127s] [77/246] installing mpfr-3.0.0-2.1 [ 127s] [78/246] installing ncurses-5.7-2.2 [ 127s] [79/246] installing bzip2-1.0.5-2.2 [ 127s] [80/246] installing glib2-2.32.3-2.5 [ 127s] [81/246] installing kmod-libs-15-2.2 [ 129s] [82/246] installing libblkid-2.20.2-2.2 [ 129s] [83/246] installing libicu-51-2.6 [ 130s] [84/246] installing smack-utils-1.0+s14-2.2 [ 130s] [85/246] installing xz-5.0.3-2.2 [ 131s] [86/246] installing binutils-2.22-2.8 [ 131s] [87/246] installing elfutils-libs-0.152-2.18 [ 131s] [88/246] installing libcurl-7.40.1_2-2.3 [ 131s] [89/246] installing nss-3.12.9-2.20 [ 131s] [90/246] installing perl-5.12.1-2.7 [ 133s] [91/246] installing ncurses-base-5.7-2.2 [ 133s] [92/246] installing perl-HTML-Tagset-3.20-2.1 [ 133s] [93/246] installing perl-IO-Compress-Base-2.008-2.7 [ 134s] [94/246] installing perl-Module-Pluggable-3.60-2.7 [ 134s] [95/246] installing perl-Pod-Escapes-1.04-2.7 [ 134s] [96/246] installing perl-TimeDate-1.20-2.1 [ 134s] [97/246] installing eglibc-devel-2.13-4.9 [ 134s] [98/246] installing smack-privilege-config-1.0.8-3.1 [ 134s] /var/tmp/rpm-tmp.1B2sn3: line 1: which: command not found [ 134s] api_feature_loader not present [ 135s] [99/246] installing file-5.04-2.1 [ 135s] [100/246] installing lzo-devel-2.03-2.1 [ 135s] [101/246] installing perl-Compress-Raw-Zlib-2.008-2.7 [ 135s] [102/246] installing perl-devel-5.12.1-2.7 [ 135s] [103/246] installing perl-libs-5.12.1-2.7 [ 135s] [104/246] installing coreutils-6.9-2.11 [ 136s] [105/246] installing freetype-2.5.5-2.1 [ 136s] [106/246] installing libX11-1.5.0-2.6 [ 137s] [107/246] installing libdlog-0.4.1-3.1 [ 137s] [108/246] installing libmount-2.20.2-2.2 [ 137s] [109/246] installing libsndfile-1.0.25-2.1 [ 138s] [110/246] installing mpc-0.9-2.1 [ 138s] [111/246] installing xz-lzma-compat-5.0.3-2.2 [ 138s] [112/246] installing elfutils-0.152-2.18 [ 138s] [113/246] installing nss-sysinit-3.12.9-2.20 [ 139s] [114/246] installing rpm-libs-4.9.1-2.2 [ 139s] [115/246] installing perl-ExtUtils-ParseXS-2.18-2.7 [ 139s] [116/246] installing perl-Pod-Simple-3.07-2.7 [ 139s] [117/246] installing perl-Test-Simple-0.80-2.7 [ 139s] [118/246] installing tizen-accelerator-1.0.1-2.1 [ 140s] [119/246] installing eina-1.7.1+svn.77445+build35-2.5 [ 140s] [120/246] installing giflib-4.1.6-2.5 [ 140s] [121/246] installing libXcomposite-0.4.4-2.1 [ 141s] [122/246] installing libXdamage-1.1.3-2.1 [ 141s] [123/246] installing libXext-1.3.1-2.1 [ 141s] [124/246] installing libXfixes-5.0-2.1 [ 141s] [125/246] installing libXrender-0.9.7-2.1 [ 141s] [126/246] installing libdlog-devel-0.4.1-3.1 [ 142s] [127/246] installing libmm-common-0.2.86-2.2 [ 142s] [128/246] installing libremix-0.2.4+build14-2.1 [ 142s] [129/246] installing perl-IO-Compress-Zlib-2.008-2.7 [ 142s] [130/246] installing perl-Test-Harness-3.12-2.7 [ 142s] [131/246] installing gawk-3.1.5-2.4 [ 143s] [132/246] installing gzip-1.3.12-2.2 [ 143s] [133/246] installing libcamsrcjpegenc-0.1.9-2.2 [ 143s] [134/246] installing xdgmime-0.0.12-2.1 [ 144s] [135/246] installing build-2011.01.10a-2.1 [ 144s] [136/246] installing bundle-0.1.36-2.2 [ 144s] [137/246] installing harfbuzz-0.9.40-2.1 [ 144s] [138/246] installing rpm-4.9.1-2.2 [ 144s] [139/246] installing cpp-4.6.4-3.13 [ 145s] [140/246] installing libslp-db-util-0.1.8-2.2 [ 146s] [141/246] installing dbus-1.6.4-2.2 [ 146s] [142/246] installing util-linux-2.20.2-2.2 [ 146s] [143/246] installing fontconfig-2.9.0-2.1 [ 149s] /opt/var/cache/fontconfig/*: No such file or directory [ 149s] [144/246] installing glib2-devel-2.32.3-2.5 [ 149s] [145/246] installing libprivilege-control-0.0.93-2.2 [ 153s] Applying sql update files on db [ 153s] /opt/dbspace/.rules-db.db3 [ 153s] Creating database from scratch [ 153s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 153s] Done. [ 153s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 153s] Done. [ 153s] [146/246] installing libcamsrcjpegenc-devel-0.1.9-2.2 [ 153s] [147/246] installing libmm-log-devel-0.1.9-2.1 [ 153s] [148/246] installing bzip2-libs-x86-arm-1.0.5-4.1 [ 154s] [149/246] installing dbus-libs-1.6.4-2.2 [ 154s] [150/246] installing eglibc-x86-arm-2.13-2.5 [ 154s] [151/246] installing elfutils-libelf-x86-arm-0.152-4.1 [ 155s] [152/246] installing elfutils-libs-x86-arm-0.152-4.4 [ 155s] [153/246] installing gmp-x86-arm-4.2.1-4.1 [ 155s] [154/246] installing libacl-x86-arm-2.2.49-4.2 [ 155s] [155/246] installing libattr-x86-arm-2.4.44-4.1 [ 156s] [156/246] installing libcap-x86-arm-2.21-4.2 [ 156s] [157/246] installing libfile-x86-arm-5.04-4.1 [ 156s] [158/246] installing libgcc-x86-arm-4.6.4-4.2 [ 156s] [159/246] installing liblua-x86-arm-5.1.4-4.1 [ 156s] [160/246] installing mpc-x86-arm-0.9-4.1 [ 156s] [161/246] installing mpfr-x86-arm-3.0.0-4.1 [ 157s] [162/246] installing ncurses-libs-x86-arm-5.7-4.1 [ 157s] [163/246] installing nspr-x86-arm-4.9-4.4 [ 157s] [164/246] installing nss-softokn-freebl-x86-arm-3.12.9-4.4 [ 157s] [165/246] installing nss-x86-arm-3.12.9-4.4 [ 157s] [166/246] installing perl-ExtUtils-MakeMaker-6.36-2.7 [ 157s] [167/246] installing popt-x86-arm-1.16-4.1 [ 157s] [168/246] installing rpm-libs-x86-arm-4.9.1-4.2 [ 158s] [169/246] installing sqlite-x86-arm-3.7.13-4.2 [ 158s] [170/246] installing xz-libs-x86-arm-5.0.3-4.1 [ 158s] [171/246] installing zlib-x86-arm-1.2.5-4.1 [ 159s] [172/246] installing ecore-1.7.1+svn.77580+build125-3.1 [ 159s] [173/246] installing libXgesture-0.1.1-2.1 [ 159s] [174/246] installing libXi-1.6.2-2.1 [ 159s] [175/246] installing libXinerama-1.1.2-2.1 [ 159s] [176/246] installing libXtst-1.2.0-2.1 [ 159s] [177/246] installing libXv-1.0.7-2.1 [ 159s] [178/246] installing libdri2-0.1.0-2.1 [ 160s] [179/246] installing eet-1.7.1+svn.77495+build14-2.1 [ 160s] [180/246] installing libXcursor-1.1.13-2.1 [ 160s] [181/246] installing libXrandr-1.4.0-2.1 [ 160s] [182/246] installing librua-0.1.8-2.2 [ 160s] [183/246] installing systemd-210-2.5 [ 161s] [184/246] installing gcc-4.6.4-3.13 [ 162s] [185/246] installing rpm-build-4.9.1-2.2 [ 163s] [186/246] installing libjournal-0.1.0-2.1 [ 164s] [187/246] installing perl-CPAN-1.9205-2.7 [ 164s] [188/246] installing bash-x86-arm-4.1-4.2 [ 164s] [189/246] installing dbus-glib-0.100-2.2 [ 164s] [190/246] installing ecore-imf-1.7.1+svn.77580+build125-3.1 [ 164s] [191/246] installing ecore-input-1.7.1+svn.77580+build125-3.1 [ 165s] [192/246] installing fdupes-x86-arm-1.40-4.1 [ 165s] [193/246] installing findutils-x86-arm-4.2.31-4.2 [ 165s] [194/246] installing gawk-x86-arm-3.1.5-4.2 [ 165s] [195/246] installing gzip-x86-arm-1.3.12-4.1 [ 165s] [196/246] installing libmm-common-devel-0.2.86-2.2 [ 165s] [197/246] installing make-x86-arm-3.82-4.2 [ 165s] [198/246] installing sed-x86-arm-4.1.5-4.1 [ 166s] [199/246] installing tar-x86-arm-1.17-4.2 [ 166s] [200/246] installing diffutils-x86-arm-3.0-4.2 [ 166s] [201/246] installing patch-x86-arm-2.6-4.1 [ 166s] [202/246] installing autoconf-2.68-2.1 [ 166s] [203/246] installing coreutils-x86-arm-6.9-4.2 [ 169s] [204/246] installing ecore-con-1.7.1+svn.77580+build125-3.1 [ 169s] [205/246] installing file-x86-arm-5.04-4.1 [ 169s] [206/246] installing libslp-utilx-0.4.5-2.1 [ 169s] [207/246] installing libtbm-1.1.1-2.2 [ 169s] [208/246] installing vconf-0.2.83-2.2 [ 169s] Failed to get D-Bus connection: Unknown error 4294967295 [ 169s] warning: %post(vconf-0.2.83-2.2.armv7l) scriptlet failed, exit status 1 [ 169s] [209/246] installing elfutils-x86-arm-0.152-4.4 [ 169s] [210/246] installing gcc-c++-4.6.4-3.13 [ 170s] [211/246] installing security-server-0.0.132-3.2 [ 170s] Failed to get D-Bus connection: Unknown error 4294967295 [ 170s] Failed to get D-Bus connection: Unknown error 4294967295 [ 170s] [212/246] installing evas-1.7.1+svn.77561+build188-3.1 [ 170s] [213/246] installing rpm-x86-arm-4.9.1-4.1 [ 170s] /bin/rpm.orig-arm already present - skipping. [ 170s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 170s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 170s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 170s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 170s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 170s] [214/246] installing rpm-build-x86-arm-4.9.1-4.2 [ 170s] [215/246] installing libtbm-devel-1.1.1-2.2 [ 171s] [216/246] installing automake-1.11.1-2.1 [ 171s] [217/246] installing ecore-fb-1.7.1+svn.77580+build125-3.1 [ 171s] [218/246] installing ecore-file-1.7.1+svn.77580+build125-3.1 [ 171s] [219/246] installing ecore-imf-evas-1.7.1+svn.77580+build125-3.1 [ 171s] [220/246] installing ecore-ipc-1.7.1+svn.77580+build125-3.1 [ 171s] [221/246] installing libsecurity-server-client-0.0.132-3.2 [ 171s] [222/246] installing ecore-input-evas-1.7.1+svn.77580+build125-3.1 [ 171s] [223/246] installing edbus-1.6.0+svn.76526slp2+build10-2.2 [ 171s] [224/246] installing libsensord-1.1.17-4.1 [ 171s] [225/246] installing ail-0.2.95-2.2 [ 172s] [226/246] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.1 [ 173s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 173s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 173s] [227/246] installing pkgmgr-info-0.0.231-2.2 [ 173s] [228/246] installing ecore-x-1.7.1+svn.77580+build125-3.1 [ 173s] [229/246] installing libtool-2.2.6b-2.1 [ 174s] [230/246] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-2.5 [ 174s] [231/246] installing efreet-1.7.1+svn.77412+build14-2.2 [ 175s] [232/246] installing sensord-1.1.17-4.1 [ 175s] [233/246] installing pkgmgr-info-parser-0.0.231-2.2 [ 175s] [234/246] installing ecore-evas-1.7.1+svn.77580+build125-3.1 [ 175s] [235/246] installing system-resource-0.2.86-2.2 [ 175s] [236/246] installing libresourced-0.2.86-2.2 [ 175s] [237/246] installing edje-1.7.2-3.1 [ 175s] [238/246] installing ethumb-1.6.0+svn.75994slp2+build09-2.2 [ 175s] [239/246] installing aul-0.2.3.0-3.1 [ 175s] [240/246] installing app-core-common-1.3.40-2.2 [ 175s] [241/246] installing elementary-1.7.1+svn.77535+build572-2.2 [ 176s] [242/246] installing app-core-efl-1.3.40-2.2 [ 176s] [243/246] installing capi-media-tool-0.1.1-2.4 [ 176s] [244/246] installing capi-media-tool-devel-0.1.1-2.4 [ 176s] [245/246] installing libmm-utility-0.34-2.2 [ 176s] [246/246] installing libmm-utility-devel-0.34-2.2 [ 176s] removing nis flags from //etc/nsswitch.conf... [ 176s] now finalizing build dir... [ 177s] /.build/build: line 2589: mount: command not found [ 177s] /.build/build: line 2590: mount: command not found [ 184s] build target is armv7l-tizen-linux [ 184s] ----------------------------------------------------------------- [ 184s] I have the following modifications for libcamsrcjpegenc-sw-libjpeg.spec: [ 184s] 5c5 [ 184s] < Release: 0 [ 184s] --- [ 184s] > Release: 2.2 [ 184s] ----------------------------------------------------------------- [ 184s] ----- building libcamsrcjpegenc-sw-libjpeg.spec (user abuild) [ 184s] ----------------------------------------------------------------- [ 184s] ----------------------------------------------------------------- [ 184s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/target/49d511a96806283a1a1bfec4bf70bed4-libcamsrcjpegenc-sw-libjpeg' /home/abuild/rpmbuild/SOURCES/libcamsrcjpegenc-sw-libjpeg.spec [ 184s] Building target platforms: armv7l-tizen-linux [ 184s] Building for target armv7l-tizen-linux [ 184s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tM7ph2 [ 184s] + umask 022 [ 184s] + cd /home/abuild/rpmbuild/BUILD [ 184s] + LANG=C [ 184s] + export LANG [ 184s] + unset DISPLAY [ 184s] + cd /home/abuild/rpmbuild/BUILD [ 184s] + rm -rf libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 184s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libcamsrcjpegenc-sw-libjpeg-0.1.15.tar.gz [ 184s] + /bin/tar -xf - [ 184s] + STATUS=0 [ 184s] + '[' 0 -ne 0 ']' [ 184s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 184s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 184s] + exit 0 [ 184s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xtpIgf [ 184s] + umask 022 [ 184s] + cd /home/abuild/rpmbuild/BUILD [ 184s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 184s] + LANG=C [ 184s] + export LANG [ 184s] + unset DISPLAY [ 184s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 184s] + export CFLAGS [ 184s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 184s] + export CXXFLAGS [ 184s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 184s] + export FFLAGS [ 184s] + LD_AS_NEEDED=1 [ 184s] + export LD_AS_NEEDED [ 184s] + export 'CFLAGS+= -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable' [ 184s] + CFLAGS+=' -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable' [ 184s] + export 'CFLAGS+= -DTIZEN_DEBUG_ENABLE' [ 184s] + CFLAGS+=' -DTIZEN_DEBUG_ENABLE' [ 184s] + ./autogen.sh [ 200s] libtoolize: putting auxiliary files in `.'. [ 200s] libtoolize: copying file `./ltmain.sh' [ 201s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 201s] libtoolize: copying file `m4/ltsugar.m4' [ 201s] libtoolize: copying file `m4/ltversion.m4' [ 201s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 227s] configure.ac:19: installing `./config.guess' [ 227s] configure.ac:19: installing `./config.sub' [ 229s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE' [ 229s] + export CFLAGS [ 229s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 229s] + export CXXFLAGS [ 229s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 229s] + export FFLAGS [ 229s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-dlog [ 229s] checking for a BSD-compatible install... /usr/bin/install -c [ 230s] checking whether build environment is sane... yes [ 230s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 230s] checking for gawk... gawk [ 230s] checking whether make sets $(MAKE)... yes [ 230s] checking for armv7l-unknown-linux-gnueabi-g++... no [ 230s] checking for armv7l-unknown-linux-gnueabi-c++... no [ 230s] checking for armv7l-unknown-linux-gnueabi-gpp... no [ 230s] checking for armv7l-unknown-linux-gnueabi-aCC... no [ 230s] checking for armv7l-unknown-linux-gnueabi-CC... no [ 230s] checking for armv7l-unknown-linux-gnueabi-cxx... no [ 230s] checking for armv7l-unknown-linux-gnueabi-cc++... no [ 230s] checking for armv7l-unknown-linux-gnueabi-cl.exe... no [ 230s] checking for armv7l-unknown-linux-gnueabi-FCC... no [ 230s] checking for armv7l-unknown-linux-gnueabi-KCC... no [ 230s] checking for armv7l-unknown-linux-gnueabi-RCC... no [ 230s] checking for armv7l-unknown-linux-gnueabi-xlC_r... no [ 230s] checking for armv7l-unknown-linux-gnueabi-xlC... no [ 230s] checking for g++... g++ [ 230s] checking whether the C++ compiler works... yes [ 230s] checking for C++ compiler default output file name... a.out [ 230s] checking for suffix of executables... [ 230s] checking whether we are cross compiling... no [ 230s] checking for suffix of object files... o [ 230s] checking whether we are using the GNU C++ compiler... yes [ 230s] checking whether g++ accepts -g... yes [ 230s] checking for style of include used by make... GNU [ 230s] checking dependency style of g++... gcc3 [ 230s] checking for gawk... (cached) gawk [ 230s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 230s] checking for gcc... gcc [ 230s] checking whether we are using the GNU C compiler... yes [ 230s] checking whether gcc accepts -g... yes [ 230s] checking for gcc option to accept ISO C89... none needed [ 230s] checking dependency style of gcc... gcc3 [ 230s] checking how to run the C preprocessor... gcc -E [ 230s] checking whether ln -s works... yes [ 230s] checking whether make sets $(MAKE)... (cached) yes [ 230s] checking build system type... armv7l-unknown-linux-gnueabi [ 230s] checking host system type... armv7l-unknown-linux-gnueabi [ 230s] checking for a sed that does not truncate output... /bin/sed [ 230s] checking for grep that handles long lines and -e... /bin/grep [ 230s] checking for egrep... /bin/grep -E [ 231s] checking for fgrep... /bin/grep -F [ 231s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 231s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 231s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 231s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 231s] checking the maximum length of command line arguments... 1572864 [ 231s] checking whether the shell understands some XSI constructs... yes [ 231s] checking whether the shell understands "+="... yes [ 231s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 231s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 231s] checking for objdump... objdump [ 231s] checking how to recognize dependent libraries... pass_all [ 231s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 231s] checking for ar... ar [ 231s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 231s] checking for strip... strip [ 231s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 231s] checking for ranlib... ranlib [ 231s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 231s] checking for ANSI C header files... yes [ 231s] checking for sys/types.h... yes [ 231s] checking for sys/stat.h... yes [ 231s] checking for stdlib.h... yes [ 231s] checking for string.h... yes [ 231s] checking for memory.h... yes [ 231s] checking for strings.h... yes [ 231s] checking for inttypes.h... yes [ 231s] checking for stdint.h... yes [ 231s] checking for unistd.h... yes [ 231s] checking for dlfcn.h... yes [ 231s] checking whether we are using the GNU C++ compiler... (cached) yes [ 231s] checking whether g++ accepts -g... (cached) yes [ 231s] checking dependency style of g++... (cached) gcc3 [ 231s] checking how to run the C++ preprocessor... g++ -E [ 231s] checking for objdir... .libs [ 231s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 231s] checking for gcc option to produce PIC... -fPIC -DPIC [ 231s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 231s] checking if gcc static flag -static works... no [ 231s] checking if gcc supports -c -o file.o... yes [ 231s] checking if gcc supports -c -o file.o... (cached) yes [ 231s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 231s] checking whether -lc should be explicitly linked in... no [ 231s] checking dynamic linker characteristics... GNU/Linux ld.so [ 231s] checking how to hardcode library paths into programs... immediate [ 231s] checking whether stripping libraries is possible... yes [ 231s] checking if libtool supports shared libraries... yes [ 231s] checking whether to build shared libraries... yes [ 231s] checking whether to build static libraries... no [ 231s] checking for ld used by g++... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 231s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 232s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 232s] checking for g++ option to produce PIC... -fPIC -DPIC [ 232s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 232s] checking if g++ static flag -static works... no [ 232s] checking if g++ supports -c -o file.o... yes [ 232s] checking if g++ supports -c -o file.o... (cached) yes [ 232s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 232s] checking dynamic linker characteristics... GNU/Linux ld.so [ 232s] checking how to hardcode library paths into programs... immediate [ 232s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 232s] checking for pkg-config... /usr/bin/pkg-config [ 232s] checking pkg-config is at least version 0.9.0... yes [ 232s] checking for DLOG... yes [ 232s] checking for ANSI C header files... (cached) yes [ 232s] checking malloc.h usability... yes [ 232s] checking malloc.h presence... yes [ 232s] checking for malloc.h... yes [ 232s] checking sys/mman.h usability... yes [ 232s] checking sys/mman.h presence... yes [ 232s] checking for sys/mman.h... yes [ 232s] checking sys/ioctl.h usability... yes [ 232s] checking sys/ioctl.h presence... yes [ 232s] checking for sys/ioctl.h... yes [ 232s] checking for an ANSI C-conforming const... yes [ 232s] checking whether time.h and sys/time.h may both be included... yes [ 232s] checking for stdlib.h... (cached) yes [ 233s] checking for GNU libc compatible malloc... yes [ 233s] checking for gethostname... yes [ 233s] checking for gettimeofday... yes [ 233s] checking for memset... yes [ 234s] checking for uname... yes [ 234s] checking for GLIB... yes [ 234s] checking for CAMSRCJPEGENC... yes [ 234s] checking for MMUTIL_IMGP... yes [ 234s] configure: creating ./config.status [ 234s] config.status: creating Makefile [ 234s] config.status: creating src/Makefile [ 234s] config.status: creating config.h [ 234s] config.status: executing depfiles commands [ 234s] config.status: executing libtool commands [ 234s] + make -j4 [ 234s] make all-recursive [ 234s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 234s] Making all in src [ 234s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 234s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -MT libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -MD -MP -MF .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo -c -o libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo `test -f 'camsrcjpegenc-sw-libjpeg.c' || echo './'`camsrcjpegenc-sw-libjpeg.c [ 234s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -MT libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -MD -MP -MF .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo -c camsrcjpegenc-sw-libjpeg.c -fPIC -DPIC -o .libs/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.o [ 235s] mv -f .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Plo [ 235s] /bin/sh ../libtool --tag=CC --mode=link gcc -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -o libcamsrcjpegenc-sw.la -rpath /usr/lib libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -ldlog -lpthread -lcapi-base-common -lglib-2.0 -ljpeg -lcamsrcjpegenc -lmmutil_imgp -lcapi-media-tool -lmmfcommon -ltbm -lglib-2.0 -ldlog -lpthread -lcapi-base-common [ 235s] libtool: link: gcc -shared .libs/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.o -Wl,--as-needed -ljpeg -lcamsrcjpegenc -lmmutil_imgp -lcapi-media-tool -lmmfcommon -ltbm -lglib-2.0 -ldlog -lpthread -lcapi-base-common -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,libcamsrcjpegenc-sw.so.0 -o .libs/libcamsrcjpegenc-sw.so.0.0.0 [ 235s] libtool: link: (cd ".libs" && rm -f "libcamsrcjpegenc-sw.so.0" && ln -s "libcamsrcjpegenc-sw.so.0.0.0" "libcamsrcjpegenc-sw.so.0") [ 235s] libtool: link: (cd ".libs" && rm -f "libcamsrcjpegenc-sw.so" && ln -s "libcamsrcjpegenc-sw.so.0.0.0" "libcamsrcjpegenc-sw.so") [ 235s] libtool: link: ( cd ".libs" && rm -f "libcamsrcjpegenc-sw.la" && ln -s "../libcamsrcjpegenc-sw.la" "libcamsrcjpegenc-sw.la" ) [ 235s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 235s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] make[2]: Nothing to be done for `all-am'. [ 235s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] + exit 0 [ 235s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PrQqZw [ 235s] + umask 022 [ 235s] + cd /home/abuild/rpmbuild/BUILD [ 235s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 235s] + LANG=C [ 235s] + export LANG [ 235s] + unset DISPLAY [ 235s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/share/license [ 235s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/share/license/libcamsrcjpegenc-sw-libjpeg [ 235s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm install [ 235s] Making install in src [ 235s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 235s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 235s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib" [ 235s] /bin/sh ../libtool --mode=install /usr/bin/install -c libcamsrcjpegenc-sw.la '/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib' [ 235s] libtool: install: /usr/bin/install -c .libs/libcamsrcjpegenc-sw.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib/libcamsrcjpegenc-sw.so.0.0.0 [ 235s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib && { ln -s -f libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so.0 || { rm -f libcamsrcjpegenc-sw.so.0 && ln -s libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so.0; }; }) [ 235s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib && { ln -s -f libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so || { rm -f libcamsrcjpegenc-sw.so && ln -s libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so; }; }) [ 235s] libtool: install: /usr/bin/install -c .libs/libcamsrcjpegenc-sw.lai /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib/libcamsrcjpegenc-sw.la [ 235s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 235s] make[2]: Nothing to be done for `install-data-am'. [ 235s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 235s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 235s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] make[2]: Nothing to be done for `install-exec-am'. [ 235s] make[2]: Nothing to be done for `install-data-am'. [ 235s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 235s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/share/info/dir [ 235s] + xargs rm -f -- [ 235s] + find /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm -regex '.*\.la$' [ 235s] + find /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm -regex '.*\.a$' [ 235s] + xargs rm -f -- [ 235s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 235s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm/usr/lib/libcamsrcjpegenc-sw.so.0.0.0 [ 235s] symlinked /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug to /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.debug [ 235s] symlinked /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug to /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.debug [ 235s] 47 blocks [ 235s] + /usr/lib/rpm/check-buildroot [ 235s] + /usr/lib/rpm//brp-compress [ 235s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 235s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 235s] + /usr/lib/rpm/brp-python-hardlink [ 235s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] Processing files: libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.armv7l [ 235s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 235s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 235s] [ 235s] Provides: libcamsrcjpegenc-sw.so.0 [ 235s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 235s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcamsrcjpegenc-sw.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libjpeg.so.8 libjpeg.so.8(LIBJPEG_8.0) [ 235s] Processing files: libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.2.armv7l [ 235s] Processing files: libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.2.armv7l [ 235s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] Wrote: /home/abuild/rpmbuild/SRPMS/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.src.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.2.armv7l.rpm [ 235s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.2.armv7l.rpm [ 235s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.hCdIa8 [ 235s] + umask 022 [ 235s] + cd /home/abuild/rpmbuild/BUILD [ 235s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 235s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.arm [ 235s] + exit 0 [ 235s] ... checking for files with abuild user/group [ 235s] ... creating baselibs [ 236s] ... comparing built packages with the former built [ 236s] /usr/lib/build/rpm-check.sh [ 236s] compare /.build.oldpackages/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.src.rpm [ 239s] compare /.build.oldpackages/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.armv7l.rpm [ 241s] /usr/lib/libcamsrcjpegenc-sw.so.0.0.0 differs in ELF sections [ 241s] --- /tmp/tmp.68F1ycKbFj 2016-05-30 17:47:05.073533667 +0000 [ 241s] +++ /tmp/tmp.FJbXFyNCfb 2016-05-30 17:47:05.077533666 +0000 [ 241s] @@ -3,8 +3,8 @@ [ 241s] [ 241s] Contents of section .note.gnu.build-id: [ 241s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 241s] - 0104 ace780c3 a5cd9010 06fb444a aa822d7f ..........DJ..-. [ 241s] - 0114 0e01a76d ...m [ 241s] + 0104 a29a7998 7fc49663 333b7d45 53dd4a91 ..y....c3;}ES.J. [ 241s] + 0114 b5369296 .6.. [ 241s] Contents of section .hash: [ 241s] 0118 11000000 23000000 1f000000 0c000000 ....#........... [ 241s] 0128 0b000000 21000000 1b000000 10000000 ....!........... [ 241s] @@ -541,4 +541,4 @@ [ 241s] Contents of section .gnu_debuglink: [ 241s] 0000 6c696263 616d7372 636a7065 67656e63 libcamsrcjpegenc [ 241s] 0010 2d73772e 736f2e30 2e302e30 2e646562 -sw.so.0.0.0.deb [ 241s] - 0020 75670000 651d092e ug..e... [ 241s] + 0020 75670000 054987d5 ug...I.. [ 241s] compare /.build.oldpackages/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.2.armv7l.rpm [ 241s] --- /tmp/tmp.WWzMILzqim 2016-05-30 17:47:05.341533662 +0000 [ 241s] +++ /tmp/tmp.A2zZB89sX0 2016-05-30 17:47:05.353533662 +0000 [ 241s] @@ -1,8 +1,8 @@ [ 241s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 241s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 241s] -/usr/lib/debug/.build-id/ac/ 0 (none) 40755 root root 0 4294967295 [ 241s] -/usr/lib/debug/.build-id/ac/e780c3a5cd901006fb444aaa822d7f0e01a76d 0 (none) 120777 root root 0 4294967295 ../../../libcamsrcjpegenc-sw.so.0.0.0 [ 241s] -/usr/lib/debug/.build-id/ac/e780c3a5cd901006fb444aaa822d7f0e01a76d.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug [ 241s] +/usr/lib/debug/.build-id/a2/ 0 (none) 40755 root root 0 4294967295 [ 241s] +/usr/lib/debug/.build-id/a2/9a79987fc49663333b7d4553dd4a91b5369296 0 (none) 120777 root root 0 4294967295 ../../../libcamsrcjpegenc-sw.so.0.0.0 [ 241s] +/usr/lib/debug/.build-id/a2/9a79987fc49663333b7d4553dd4a91b5369296.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug [ 241s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 241s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 241s] /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug 0 (none) 100755 root root 0 4294967295 [ 241s] RPM meta information is different [ 241s] compare /.build.oldpackages/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.2.armv7l.rpm [ 241s] ... saving built statistics [ 241s] /.build/build: line 3148: mount: command not found [ 241s] ERROR: no root disk device found, yet another new device name? [ 241s] ls: cannot access /sys/block/: No such file or directory [ 241s] /.build/build: line 3163: umount: command not found [ 241s] ... saving built packages [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.armv7l.rpm [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.2.armv7l.rpm [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.2.armv7l.rpm [ 242s] /home/abuild/rpmbuild/SRPMS/libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.src.rpm [ 242s] /home/abuild/rpmbuild/OTHER/_statistics [ 242s] [ 242s] w29 finished "build libcamsrcjpegenc-sw-libjpeg.spec" at Mon May 30 17:47:06 UTC 2016. [ 242s] [ 245s] [ 222.106651] SysRq : Power Off [ 245s] [ 222.216215] Power down. [ 245s] build: extracting built packages... [ 245s] libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.armv7l.rpm [ 245s] libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-2.2.armv7l.rpm [ 245s] libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-2.2.armv7l.rpm [ 245s] libcamsrcjpegenc-sw-libjpeg-0.1.15-2.2.src.rpm [ 245s] _statistics