[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w22 started "build _service:gbs:xcb-util.spec" at Fri Sep 18 08:29:54 UTC 2015. [ 0s] [ 0s] Building xcb-util for project 'Tizen:2.3.1:Wearable' repository 'emulator-circle' arch 'i586' srcmd5 '641a4cda75579d261191e8a844a50d99' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:xcb-util.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:xcb-util.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 0s] [11/31] preinstalling nspr... [ 0s] [12/31] preinstalling nss-softokn-freebl... [ 0s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 6s] booting kvm ... [ 6s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 20s] Waiting for device /dev/vda to appear: ok [ 20s] fsck from util-linux 2.21.2 [ 20s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 21s] /dev/vda: clean, 4065/2392064 files, 187802/9568256 blocks [ 21s] fsck succeeded. Mounting root device read-write. [ 21s] Mounting root /dev/vda [ 21s] mount -o rw -t ext4 /dev/vda /root [ 44s] replacing /etc/mtab with symlink to /proc/self/mounts [ 65s] 2nd stage started in virtual machine [ 65s] machine type: x86_64 [ 65s] switching personality to 8... [ 65s] 2nd stage started in virtual machine [ 65s] machine type: i686 [ 65s] /.build/build: line 770: mount: command not found [ 67s] swapon on /dev/vdb [ 68s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 68s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 70s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 71s] logging output to //.build.log... [ 71s] processing specfile /.build-srcdir/_service:gbs:xcb-util.spec ... [ 72s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 89s] initializing rpm db... [ 99s] [1/108] installing cloog-0.16.1-2.1 [ 99s] [2/108] installing emulator-kernel-user-headers-3.12.18-2.2 [ 100s] [3/108] installing tizen-release-2.2.0-2.1 [ 101s] [4/108] installing tzdata-2014j-2.1 [ 101s] [5/108] installing libgcc-4.6.4-3.1 [ 102s] [6/108] installing setup-0.1-2.1 [ 103s] [7/108] installing filesystem-0.1-2.1 [ 105s] warning: group lock does not exist - using root [ 105s] [8/108] installing eglibc-2.13-2.5 [ 106s] [9/108] installing libstdc++-4.6.4-3.1 [ 106s] [10/108] installing bzip2-libs-1.0.5-2.1 [ 106s] [11/108] installing cpio-2.8-2.1 [ 106s] [12/108] installing e2fsprogs-libs-1.41.9-2.2 [ 106s] [13/108] installing elfutils-libelf-0.152-2.6 [ 106s] [14/108] installing findutils-4.2.31-2.1 [ 106s] [15/108] installing gdbm-1.8.3-2.1 [ 107s] [16/108] installing libXau-1.0.7-2.1 [ 107s] [17/108] installing libattr-2.4.44-2.4 [ 107s] [18/108] installing liblua-5.1.4-2.1 [ 107s] [19/108] installing libstdc++-devel-4.6.4-3.1 [ 108s] [20/108] installing libuuid-2.20.2-2.1 [ 108s] [21/108] installing lzo-2.03-2.1 [ 108s] [22/108] installing m4-1.4.14-2.1 [ 108s] [23/108] installing net-tools-1.60-2.1 [ 108s] [24/108] installing nspr-4.9-2.5 [ 108s] [25/108] installing nss-softokn-freebl-3.12.9-2.8 [ 108s] [26/108] installing pkg-config-0.25-2.1 [ 108s] [27/108] installing popt-1.16-2.1 [ 109s] [28/108] installing readline-5.2-2.1 [ 109s] [29/108] installing sed-4.1.5-2.1 [ 109s] [30/108] installing sqlite-3.7.13-2.1 [ 109s] [31/108] installing tar-1.17-2.1 [ 110s] [32/108] installing xz-libs-5.0.3-2.1 [ 110s] [33/108] installing zlib-1.2.5-2.6 [ 110s] [34/108] installing bash-4.1-2.1 [ 110s] [35/108] installing diffutils-3.0-2.1 [ 110s] [36/108] installing libgomp-4.6.4-3.1 [ 110s] [37/108] installing patch-2.6-2.1 [ 111s] [38/108] installing gmp-4.2.1-2.1 [ 111s] [39/108] installing gperf-3.0.4-2.1 [ 111s] [40/108] installing libpcre-7.7-2.1 [ 111s] [41/108] installing ncurses-libs-5.7-2.1 [ 111s] [42/108] installing build-compare-2009.10.14-2.3 [ 111s] [43/108] installing libpthread-stubs-0.3-2.1 [ 111s] [44/108] installing xorg-x11-proto-core-7.0.25-2.1 [ 111s] [45/108] installing xorg-x11-xutils-dev-7.7-2.1 [ 111s] [46/108] installing eglibc-headers-2.13-2.5 [ 112s] [47/108] installing grep-2.5.1a-2.1 [ 112s] [48/108] installing libacl-2.2.49-2.1 [ 112s] [49/108] installing libcap-2.21-2.1 [ 112s] [50/108] installing libfile-5.04-2.1 [ 112s] [51/108] installing libxcb-1.8.1-2.1 [ 113s] [52/108] installing lzo-minilzo-2.03-2.1 [ 113s] [53/108] installing make-3.82-2.1 [ 113s] [54/108] installing mpfr-3.0.0-2.1 [ 113s] [55/108] installing ncurses-5.7-2.1 [ 114s] [56/108] installing unzip-6.0-2.2 [ 114s] [57/108] installing zlib-devel-1.2.5-2.6 [ 114s] [58/108] installing bzip2-1.0.5-2.1 [ 116s] [59/108] installing libblkid-2.20.2-2.1 [ 116s] [60/108] installing xz-5.0.3-2.1 [ 116s] [61/108] installing binutils-2.22-2.4 [ 116s] [62/108] installing elfutils-libs-0.152-2.6 [ 116s] [63/108] installing ppl-0.11.2-2.1 [ 117s] [64/108] installing nss-3.12.9-2.8 [ 118s] [65/108] installing perl-5.12.1-2.4 [ 129s] [66/108] installing ncurses-base-5.7-2.1 [ 130s] [67/108] installing perl-HTML-Tagset-3.20-2.1 [ 130s] [68/108] installing perl-IO-Compress-Base-2.008-2.4 [ 130s] [69/108] installing perl-Module-Pluggable-3.60-2.4 [ 131s] [70/108] installing perl-Pod-Escapes-1.04-2.4 [ 131s] [71/108] installing perl-TimeDate-1.20-2.1 [ 131s] [72/108] installing eglibc-devel-2.13-2.5 [ 132s] [73/108] installing file-5.04-2.1 [ 132s] [74/108] installing perl-Compress-Raw-Zlib-2.008-2.4 [ 133s] [75/108] installing perl-libs-5.12.1-2.4 [ 136s] [76/108] installing coreutils-6.9-2.1 [ 138s] [77/108] installing libXau-devel-1.0.7-2.1 [ 139s] [78/108] installing libmount-2.20.2-2.1 [ 139s] [79/108] installing lzo-devel-2.03-2.1 [ 141s] [80/108] installing mpc-0.9-2.1 [ 142s] [81/108] installing perl-devel-5.12.1-2.4 [ 142s] [82/108] installing xz-lzma-compat-5.0.3-2.1 [ 143s] [83/108] installing cloog-ppl-0.16.1-2.1 [ 143s] [84/108] installing nss-sysinit-3.12.9-2.8 [ 145s] [85/108] installing ppl-pwl-0.11.2-2.1 [ 145s] [86/108] installing elfutils-0.152-2.6 [ 147s] [87/108] installing eglibc-common-2.13-2.5 [ 154s] [88/108] installing rpm-libs-4.9.1-2.1 [ 155s] [89/108] installing perl-ExtUtils-ParseXS-2.18-2.4 [ 155s] [90/108] installing perl-Pod-Simple-3.07-2.4 [ 157s] [91/108] installing perl-Test-Simple-0.80-2.4 [ 157s] [92/108] installing gawk-3.1.5-2.3 [ 157s] [93/108] installing gzip-1.3.12-2.1 [ 158s] [94/108] installing perl-IO-Compress-Zlib-2.008-2.4 [ 164s] [95/108] installing perl-Test-Harness-3.12-2.4 [ 166s] [96/108] installing libxcb-devel-1.8.1-2.1 [ 166s] [97/108] installing rpm-4.9.1-2.1 [ 169s] [98/108] installing build-2011.01.10a-2.1 [ 170s] [99/108] installing util-linux-2.20.2-2.1 [ 189s] [100/108] installing cpp-4.6.4-3.1 [ 191s] [101/108] installing perl-ExtUtils-MakeMaker-6.36-2.4 [ 193s] [102/108] installing gcc-4.6.4-3.1 [ 195s] [103/108] installing rpm-build-4.9.1-2.1 [ 196s] [104/108] installing perl-CPAN-1.9205-2.4 [ 196s] [105/108] installing autoconf-2.68-2.1 [ 197s] [106/108] installing gcc-c++-4.6.4-3.1 [ 198s] [107/108] installing automake-1.11.1-2.1 [ 198s] [108/108] installing libtool-2.2.6b-2.1 [ 198s] removing nis flags from //etc/nsswitch.conf... [ 198s] now finalizing build dir... [ 198s] /.build/build: line 2585: mount: command not found [ 198s] /.build/build: line 2586: mount: command not found [ 200s] ----------------------------------------------------------------- [ 200s] I have the following modifications for xcb-util.spec: [ 200s] 5c5 [ 200s] < Release: slp.1.3 [ 200s] --- [ 200s] > Release: 2.2 [ 200s] ----------------------------------------------------------------- [ 200s] ----- building xcb-util.spec (user abuild) [ 200s] ----------------------------------------------------------------- [ 200s] ----------------------------------------------------------------- [ 200s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3.1:Wearable/emulator-circle/641a4cda75579d261191e8a844a50d99-xcb-util' /home/abuild/rpmbuild/SOURCES/xcb-util.spec [ 200s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oQnE0q [ 200s] + umask 022 [ 200s] + cd /home/abuild/rpmbuild/BUILD [ 200s] + LANG=C [ 200s] + export LANG [ 200s] + unset DISPLAY [ 200s] + cd /home/abuild/rpmbuild/BUILD [ 200s] + rm -rf xcb-util-0.3.8 [ 200s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-util-0.3.8.tar.gz [ 200s] + /bin/tar -xf - [ 200s] + STATUS=0 [ 200s] + '[' 0 -ne 0 ']' [ 200s] + cd xcb-util-0.3.8 [ 200s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 200s] + exit 0 [ 200s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KgK0AT [ 200s] + umask 022 [ 200s] + cd /home/abuild/rpmbuild/BUILD [ 200s] + cd xcb-util-0.3.8 [ 200s] + LANG=C [ 200s] + export LANG [ 200s] + unset DISPLAY [ 200s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 200s] + export CFLAGS [ 200s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 200s] + export CXXFLAGS [ 200s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 200s] + export FFLAGS [ 200s] + LD_AS_NEEDED=1 [ 200s] + export LD_AS_NEEDED [ 200s] + ./autogen.sh [ 200s] libtoolize: putting auxiliary files in `.'. [ 200s] libtoolize: linking file `./ltmain.sh' [ 200s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 200s] libtoolize: linking file `m4/libtool.m4' [ 200s] libtoolize: linking file `m4/ltoptions.m4' [ 200s] libtoolize: linking file `m4/ltsugar.m4' [ 200s] libtoolize: linking file `m4/ltversion.m4' [ 200s] libtoolize: linking file `m4/lt~obsolete.m4' [ 200s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 201s] autoreconf: Entering directory `.' [ 201s] autoreconf: configure.ac: not using Gettext [ 202s] autoreconf: running: aclocal -I m4 [ 203s] autoreconf: configure.ac: tracing [ 204s] autoreconf: running: libtoolize --copy [ 204s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 205s] autoreconf: running: /usr/bin/autoconf [ 206s] autoreconf: configure.ac: not using Autoheader [ 206s] autoreconf: running: automake --add-missing --copy --no-force [ 206s] configure.ac:10: installing `./config.guess' [ 206s] configure.ac:10: installing `./config.sub' [ 206s] configure.ac:6: installing `./install-sh' [ 206s] configure.ac:6: installing `./missing' [ 206s] src/Makefile.am: installing `./depcomp' [ 206s] autoreconf: Leaving directory `.' [ 206s] checking for a BSD-compatible install... /usr/bin/install -c [ 207s] checking whether build environment is sane... yes [ 207s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 207s] checking for gawk... gawk [ 207s] checking whether make sets $(MAKE)... yes [ 207s] checking whether to enable maintainer-specific portions of Makefiles... no [ 207s] checking for m4 that supports -I option... /usr/bin/m4 [ 208s] checking build system type... i686-pc-linux-gnu [ 208s] checking host system type... i686-pc-linux-gnu [ 208s] checking for style of include used by make... GNU [ 208s] checking for gcc... gcc [ 208s] checking whether the C compiler works... yes [ 208s] checking for C compiler default output file name... a.out [ 208s] checking for suffix of executables... [ 208s] checking whether we are cross compiling... no [ 208s] checking for suffix of object files... o [ 208s] checking whether we are using the GNU C compiler... yes [ 208s] checking whether gcc accepts -g... yes [ 208s] checking for gcc option to accept ISO C89... none needed [ 208s] checking dependency style of gcc... gcc3 [ 208s] checking for a sed that does not truncate output... /bin/sed [ 208s] checking for grep that handles long lines and -e... /bin/grep [ 208s] checking for egrep... /bin/grep -E [ 208s] checking for fgrep... /bin/grep -F [ 208s] checking for ld used by gcc... /usr/bin/ld [ 208s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 208s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 208s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 208s] checking whether ln -s works... yes [ 208s] checking the maximum length of command line arguments... 1572864 [ 208s] checking whether the shell understands some XSI constructs... yes [ 208s] checking whether the shell understands "+="... yes [ 208s] checking for /usr/bin/ld option to reload object files... -r [ 208s] checking for objdump... objdump [ 208s] checking how to recognize dependent libraries... pass_all [ 208s] checking for ar... ar [ 208s] checking for strip... strip [ 208s] checking for ranlib... ranlib [ 208s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 208s] checking how to run the C preprocessor... gcc -E [ 208s] checking for ANSI C header files... yes [ 208s] checking for sys/types.h... yes [ 208s] checking for sys/stat.h... yes [ 208s] checking for stdlib.h... yes [ 208s] checking for string.h... yes [ 208s] checking for memory.h... yes [ 208s] checking for strings.h... yes [ 208s] checking for inttypes.h... yes [ 208s] checking for stdint.h... yes [ 208s] checking for unistd.h... yes [ 208s] checking for dlfcn.h... yes [ 208s] checking for objdir... .libs [ 208s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 208s] checking for gcc option to produce PIC... -fPIC -DPIC [ 208s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 208s] checking if gcc static flag -static works... no [ 208s] checking if gcc supports -c -o file.o... yes [ 208s] checking if gcc supports -c -o file.o... (cached) yes [ 208s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 208s] checking whether -lc should be explicitly linked in... no [ 208s] checking dynamic linker characteristics... GNU/Linux ld.so [ 208s] checking how to hardcode library paths into programs... immediate [ 208s] checking whether stripping libraries is possible... yes [ 208s] checking if libtool supports shared libraries... yes [ 208s] checking whether to build shared libraries... yes [ 208s] checking whether to build static libraries... yes [ 208s] checking for pkg-config... /usr/bin/pkg-config [ 208s] checking pkg-config is at least version 0.9.0... yes [ 209s] checking for gcc option to accept ISO C99... -std=gnu99 [ 209s] checking whether __clang__ is declared... no [ 209s] checking whether __INTEL_COMPILER is declared... no [ 209s] checking whether __SUNPRO_C is declared... no [ 209s] checking for XCB... yes [ 209s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 209s] yes [ 209s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 209s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 209s] checking if gcc -std=gnu99 supports-Wall... yes [ 209s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 209s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 209s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 209s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 209s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 209s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 209s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 209s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 209s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 209s] checking if gcc -std=gnu99 supports-Wunused... yes [ 209s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 209s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 209s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 209s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 209s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 209s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 209s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 210s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 210s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 210s] checking if gcc -std=gnu99 supports-pedantic... yes [ 210s] checking if gcc -std=gnu99 supports-Werror... yes [ 210s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 210s] checking whether to build developer documentation... yes [ 210s] checking for doxygen... no [ 210s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 210s] checking for gperf... gperf [ 210s] checking for vasprintf... yes [ 210s] checking for ssize_t... yes [ 210s] checking for XPROTO... yes [ 210s] configure: creating ./config.status [ 210s] config.status: creating Makefile [ 210s] config.status: creating src/Makefile [ 210s] config.status: creating xcb-atom.pc [ 210s] config.status: creating xcb-aux.pc [ 210s] config.status: creating xcb-event.pc [ 210s] config.status: creating xcb-util.pc [ 210s] config.status: creating xcb-renderutil.pc [ 210s] config.status: creating xcb_util_intro [ 210s] config.status: executing depfiles commands [ 210s] config.status: executing libtool commands [ 210s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 210s] + export CFLAGS [ 210s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 210s] + export CXXFLAGS [ 210s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 210s] + export FFLAGS [ 210s] + autoreconf -v --install --force [ 210s] autoreconf: Entering directory `.' [ 210s] autoreconf: configure.ac: not using Gettext [ 211s] autoreconf: running: aclocal --force -I m4 [ 215s] autoreconf: configure.ac: tracing [ 216s] autoreconf: running: libtoolize --copy --force [ 217s] libtoolize: putting auxiliary files in `.'. [ 217s] libtoolize: copying file `./ltmain.sh' [ 217s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 217s] libtoolize: copying file `m4/libtool.m4' [ 217s] libtoolize: copying file `m4/ltoptions.m4' [ 217s] libtoolize: copying file `m4/ltsugar.m4' [ 217s] libtoolize: copying file `m4/ltversion.m4' [ 217s] libtoolize: copying file `m4/lt~obsolete.m4' [ 217s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 220s] autoreconf: running: /usr/bin/autoconf --force [ 221s] autoreconf: configure.ac: not using Autoheader [ 221s] autoreconf: running: automake --add-missing --copy --force-missing [ 224s] autoreconf: Leaving directory `.' [ 224s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 225s] checking for a BSD-compatible install... /usr/bin/install -c [ 226s] checking whether build environment is sane... yes [ 226s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 226s] checking for gawk... gawk [ 226s] checking whether make sets $(MAKE)... yes [ 226s] checking whether to enable maintainer-specific portions of Makefiles... no [ 226s] checking for m4 that supports -I option... /usr/bin/m4 [ 226s] checking build system type... i686-pc-linux-gnu [ 226s] checking host system type... i686-pc-linux-gnu [ 226s] checking for style of include used by make... GNU [ 226s] checking for i686-pc-linux-gnu-gcc... no [ 226s] checking for gcc... gcc [ 226s] checking whether the C compiler works... yes [ 226s] checking for C compiler default output file name... a.out [ 226s] checking for suffix of executables... [ 226s] checking whether we are cross compiling... no [ 226s] checking for suffix of object files... o [ 226s] checking whether we are using the GNU C compiler... yes [ 226s] checking whether gcc accepts -g... yes [ 226s] checking for gcc option to accept ISO C89... none needed [ 226s] checking dependency style of gcc... gcc3 [ 226s] checking for a sed that does not truncate output... /bin/sed [ 226s] checking for grep that handles long lines and -e... /bin/grep [ 226s] checking for egrep... /bin/grep -E [ 226s] checking for fgrep... /bin/grep -F [ 226s] checking for ld used by gcc... /usr/bin/ld [ 226s] checking if the linker (/usr/bin/ld) is GNU ld... yes [ 226s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 226s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 226s] checking whether ln -s works... yes [ 226s] checking the maximum length of command line arguments... 1572864 [ 226s] checking whether the shell understands some XSI constructs... yes [ 226s] checking whether the shell understands "+="... yes [ 226s] checking for /usr/bin/ld option to reload object files... -r [ 226s] checking for i686-pc-linux-gnu-objdump... no [ 226s] checking for objdump... objdump [ 226s] checking how to recognize dependent libraries... pass_all [ 226s] checking for i686-pc-linux-gnu-ar... no [ 226s] checking for ar... ar [ 226s] checking for i686-pc-linux-gnu-strip... no [ 226s] checking for strip... strip [ 226s] checking for i686-pc-linux-gnu-ranlib... no [ 226s] checking for ranlib... ranlib [ 226s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 226s] checking how to run the C preprocessor... gcc -E [ 226s] checking for ANSI C header files... yes [ 226s] checking for sys/types.h... yes [ 226s] checking for sys/stat.h... yes [ 226s] checking for stdlib.h... yes [ 226s] checking for string.h... yes [ 226s] checking for memory.h... yes [ 226s] checking for strings.h... yes [ 227s] checking for inttypes.h... yes [ 227s] checking for stdint.h... yes [ 227s] checking for unistd.h... yes [ 227s] checking for dlfcn.h... yes [ 227s] checking for objdir... .libs [ 227s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 227s] checking for gcc option to produce PIC... -fPIC -DPIC [ 227s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 228s] checking if gcc static flag -static works... no [ 228s] checking if gcc supports -c -o file.o... yes [ 228s] checking if gcc supports -c -o file.o... (cached) yes [ 228s] checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes [ 228s] checking whether -lc should be explicitly linked in... no [ 228s] checking dynamic linker characteristics... GNU/Linux ld.so [ 228s] checking how to hardcode library paths into programs... immediate [ 228s] checking whether stripping libraries is possible... yes [ 228s] checking if libtool supports shared libraries... yes [ 228s] checking whether to build shared libraries... yes [ 228s] checking whether to build static libraries... no [ 228s] checking for i686-pc-linux-gnu-pkg-config... no [ 228s] checking for pkg-config... /usr/bin/pkg-config [ 228s] checking pkg-config is at least version 0.9.0... yes [ 229s] checking for gcc option to accept ISO C99... -std=gnu99 [ 229s] checking whether __clang__ is declared... no [ 229s] checking whether __INTEL_COMPILER is declared... no [ 229s] checking whether __SUNPRO_C is declared... no [ 229s] checking for XCB... yes [ 229s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 229s] yes [ 229s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 229s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 229s] checking if gcc -std=gnu99 supports-Wall... yes [ 229s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 229s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 229s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 229s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 229s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 229s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 229s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 229s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 229s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 229s] checking if gcc -std=gnu99 supports-Wunused... yes [ 229s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 230s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 230s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 230s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 230s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 230s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 230s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 231s] checking if gcc -std=gnu99 supports-pedantic... yes [ 231s] checking if gcc -std=gnu99 supports-Werror... yes [ 231s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 231s] checking whether to build developer documentation... yes [ 231s] checking for doxygen... no [ 231s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 231s] checking for gperf... gperf [ 231s] checking for vasprintf... yes [ 231s] checking for ssize_t... yes [ 231s] checking for XPROTO... yes [ 231s] configure: creating ./config.status [ 231s] config.status: creating Makefile [ 231s] config.status: creating src/Makefile [ 231s] config.status: creating xcb-atom.pc [ 231s] config.status: creating xcb-aux.pc [ 231s] config.status: creating xcb-event.pc [ 231s] config.status: creating xcb-util.pc [ 231s] config.status: creating xcb-renderutil.pc [ 231s] config.status: creating xcb_util_intro [ 231s] config.status: executing depfiles commands [ 231s] config.status: executing libtool commands [ 231s] + make -j4 [ 231s] Making all in src [ 231s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 231s] /usr/bin/m4 -I. atoms.gperf.m4 >atoms.gperf [ 231s] gperf --output-file atoms.c atoms.gperf [ 231s] make all-am [ 231s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 231s] CC event.lo [ 231s] CC atoms.lo [ 231s] CC xcb_aux.lo [ 231s] atoms.gperf:37:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 231s] atoms.gperf: In function 'hash': [ 231s] atoms.gperf:37:1: warning: old-style function definition [-Wold-style-definition] [ 231s] atoms.gperf: At top level: [ 231s] atoms.gperf:241:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 231s] atoms.gperf: In function 'in_word_set': [ 231s] atoms.gperf:241:1: warning: old-style function definition [-Wold-style-definition] [ 231s] atoms.gperf: In function 'makename': [ 231s] atoms.gperf:292:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 231s] CCLD libxcb-util.la [ 232s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] make[1]: Nothing to be done for `all-am'. [ 232s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] + exit 0 [ 232s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.26Ihxg [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd xcb-util-0.3.8 [ 232s] + LANG=C [ 232s] + export LANG [ 232s] + unset DISPLAY [ 232s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 install [ 232s] Making install in src [ 232s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] /usr/bin/make install-am [ 232s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib" [ 232s] /bin/sh ../libtool --mode=install /usr/bin/install -c libxcb-util.la '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib' [ 232s] libtool: install: /usr/bin/install -c .libs/libxcb-util.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib/libxcb-util.so.0.0.0 [ 232s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so.0 || { rm -f libxcb-util.so.0 && ln -s libxcb-util.so.0.0.0 libxcb-util.so.0; }; }) [ 232s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so || { rm -f libxcb-util.so && ln -s libxcb-util.so.0.0.0 libxcb-util.so; }; }) [ 232s] libtool: install: /usr/bin/install -c .libs/libxcb-util.lai /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib/libxcb-util.la [ 232s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 232s] test -z "/usr/include/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/include/xcb" [ 232s] /usr/bin/install -c -m 644 xcb_util.h xcb_atom.h xcb_aux.h xcb_bitops.h xcb_event.h '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/include/xcb' [ 232s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 232s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] make[2]: Nothing to be done for `install-exec-am'. [ 232s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib/pkgconfig" [ 232s] /usr/bin/install -c -m 644 xcb-atom.pc xcb-aux.pc xcb-event.pc xcb-util.pc xcb-renderutil.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib/pkgconfig' [ 232s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 232s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/info/dir [ 232s] + xargs rm -f -- [ 232s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 -regex '.*\.la$' [ 232s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 -regex '.*\.a$' [ 232s] + xargs rm -f -- [ 232s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-util-0.3.8 [ 232s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/lib/libxcb-util.so.0.0.0 [ 232s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.0.debug [ 232s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.debug [ 232s] 56 blocks [ 232s] + /usr/lib/rpm/check-buildroot [ 232s] + /usr/lib/rpm//brp-compress [ 232s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 232s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 232s] + /usr/lib/rpm/brp-python-hardlink [ 232s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] Processing files: xcb-util-0.3.8-2.2.i586 [ 232s] Provides: libxcb-util.so.0 xcb-renderutil [ 232s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 232s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 232s] Requires(post): /sbin/ldconfig [ 232s] Requires(postun): /sbin/ldconfig [ 232s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.8) libxcb.so.1 [ 232s] Processing files: xcb-util-devel-0.3.8-2.2.i586 [ 232s] Provides: pkgconfig(xcb-atom) = 0.3.8 pkgconfig(xcb-aux) = 0.3.8 pkgconfig(xcb-event) = 0.3.8 pkgconfig(xcb-renderutil) = 0.3.8 pkgconfig(xcb-util) = 0.3.8 [ 232s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 232s] Requires: /usr/bin/pkg-config libxcb-util.so.0 pkgconfig(xcb) [ 232s] Processing files: xcb-util-debuginfo-0.3.8-2.2.i586 [ 232s] Processing files: xcb-util-debugsource-0.3.8-2.2.i586 [ 232s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-2.2.src.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-2.2.i586.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-2.2.i586.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-2.2.i586.rpm [ 232s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-2.2.i586.rpm [ 232s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MKVl8E [ 232s] + umask 022 [ 232s] + cd /home/abuild/rpmbuild/BUILD [ 232s] + cd xcb-util-0.3.8 [ 232s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 [ 232s] + exit 0 [ 232s] ... checking for files with abuild user/group [ 232s] ... creating baselibs [ 232s] ... comparing built packages with the former built [ 232s] /usr/lib/build/rpm-check.sh [ 232s] compare /.build.oldpackages/xcb-util-0.3.8-2.1.src.rpm /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-2.2.src.rpm [ 233s] compare /.build.oldpackages/xcb-util-0.3.8-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-2.2.i586.rpm [ 234s] --- /tmp/tmp.cikjw5PCNm 2015-09-18 08:33:47.166355638 +0000 [ 234s] +++ /tmp/tmp.rtLxBVmBNL 2015-09-18 08:33:47.178355638 +0000 [ 234s] @@ -17,14 +17,14 @@ [ 234s] [ 234s] /sbin/ldconfig [ 234s] [ 234s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386/usr/share/info [ 234s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386/usr/share/doc [ 234s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386/usr/share/doc/xcb-util [ 234s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386/usr/share/gtk-doc [ 234s] -rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386/usr/share/man [ 234s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386 -regex ".*/man/man./.*.[0-9]" | xargs rm -f -- [ 234s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386 -regex ".*/man/../man./.*.[0-9]" | xargs rm -f -- [ 234s] -find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.1.i386 -regex ".*/man/man./.*.[0-9]pm" | xargs rm -f -- [ 234s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/info [ 234s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/doc [ 234s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/doc/xcb-util [ 234s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/gtk-doc [ 234s] +rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386/usr/share/man [ 234s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 -regex ".*/man/man./.*.[0-9]" | xargs rm -f -- [ 234s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 -regex ".*/man/../man./.*.[0-9]" | xargs rm -f -- [ 234s] +find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-2.2.i386 -regex ".*/man/man./.*.[0-9]pm" | xargs rm -f -- [ 234s] [ 234s] [ 234s] (none) (none) (none) [ 234s] RPM meta information is different [ 234s] compare /.build.oldpackages/xcb-util-debuginfo-0.3.8-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-2.2.i586.rpm [ 234s] compare /.build.oldpackages/xcb-util-debugsource-0.3.8-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-2.2.i586.rpm [ 235s] compare /.build.oldpackages/xcb-util-devel-0.3.8-2.1.i586.rpm /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-2.2.i586.rpm [ 235s] ... saving built statistics [ 235s] /.build/build: line 3144: mount: command not found [ 235s] ERROR: no root disk device found, yet another new device name? [ 235s] ls: cannot access /sys/block/: No such file or directory [ 235s] /.build/build: line 3159: umount: command not found [ 235s] ... saving built packages [ 236s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-0.3.8-2.2.i586.rpm [ 236s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-debuginfo-0.3.8-2.2.i586.rpm [ 236s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-debugsource-0.3.8-2.2.i586.rpm [ 236s] /home/abuild/rpmbuild/RPMS/i586/xcb-util-devel-0.3.8-2.2.i586.rpm [ 236s] /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-2.2.src.rpm [ 236s] /home/abuild/rpmbuild/OTHER/_statistics [ 236s] [ 236s] w22 finished "build xcb-util.spec" at Fri Sep 18 08:33:49 UTC 2015. [ 236s] [ 240s] [ 226.578748] SysRq : Power Off [ 240s] [ 226.585586] Power down. [ 241s] build: extracting built packages... [ 241s] xcb-util-0.3.8-2.2.i586.rpm [ 241s] xcb-util-debuginfo-0.3.8-2.2.i586.rpm [ 241s] xcb-util-debugsource-0.3.8-2.2.i586.rpm [ 241s] xcb-util-devel-0.3.8-2.2.i586.rpm [ 241s] xcb-util-0.3.8-2.2.src.rpm [ 241s] _statistics