[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:autoconf.spec" at Tue Feb 3 01:38:33 UTC 2015. [ 0s] [ 0s] Building autoconf for project 'Tizen:2.3:Mobile' repository 'emulator' arch 'i586' srcmd5 'ccddb968f0ee60f2c07feddde3e17f53' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:autoconf.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:autoconf.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:autoconf.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 0s] [11/31] preinstalling nspr... [ 0s] [12/31] preinstalling nss-softokn-freebl... [ 0s] [13/31] preinstalling popt... [ 0s] [14/31] preinstalling readline... [ 0s] [15/31] preinstalling sed... [ 0s] [16/31] preinstalling sqlite... [ 0s] [17/31] preinstalling tar... [ 0s] [18/31] preinstalling xz-libs... [ 0s] [19/31] preinstalling zlib... [ 0s] [20/31] preinstalling bash... [ 0s] [21/31] preinstalling diffutils... [ 0s] [22/31] preinstalling libstdc++... [ 0s] [23/31] preinstalling eglibc-common... [ 0s] [24/31] preinstalling libacl... [ 0s] [25/31] preinstalling libcap... [ 0s] [26/31] preinstalling libfile... [ 0s] [27/31] preinstalling bzip2... [ 0s] [28/31] preinstalling nss... [ 0s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-Test-Harness -> perl-CPAN [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4045/2392064 files, 187903/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:autoconf.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:autoconf.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 6s] [1/99] installing cloog-0.16.1-3.1 [ 6s] [2/99] installing kernel-headers-3.0.15-2.1 [ 6s] [3/99] installing tizen-release-2.2.0-2.1 [ 6s] [4/99] installing tzdata-2013h-1.1 [ 7s] [5/99] installing libgcc-4.6-2013.30 [ 7s] [6/99] installing setup-0.1-5.1 [ 7s] [7/99] installing filesystem-0.1-1.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/99] installing eglibc-2.13-2.7 [ 7s] [9/99] installing libstdc++-4.6-2013.30 [ 7s] [10/99] installing bzip2-libs-1.0.5-5.1 [ 7s] [11/99] installing cpio-2.8-4.1 [ 7s] [12/99] installing e2fsprogs-libs-1.41.9-2.17 [ 7s] [13/99] installing elfutils-libelf-0.152-1.47 [ 7s] [14/99] installing findutils-4.2.31-2.1 [ 7s] [15/99] installing gdbm-1.8.3-2.1 [ 7s] [16/99] installing libattr-2.4.44-7.10 [ 7s] [17/99] installing liblua-5.1.4-7.1 [ 7s] [18/99] installing libstdc++-devel-4.6-2013.30 [ 7s] [19/99] installing libuuid-2.20.2-9.1 [ 7s] [20/99] installing lzo-2.03-2.1 [ 7s] [21/99] installing m4-1.4.14-2.1 [ 7s] [22/99] installing net-tools-1.60-87.8 [ 7s] [23/99] installing nspr-4.9-1.22 [ 7s] [24/99] installing nss-softokn-freebl-3.12.9-3.58 [ 7s] [25/99] installing pkgconfig-0.25-3.1 [ 8s] [26/99] installing popt-1.16-4.1 [ 8s] [27/99] installing readline-5.2-14.1 [ 8s] [28/99] installing sed-4.1.5-3.1 [ 8s] [29/99] installing sqlite-3.7.13-3.1 [ 8s] [30/99] installing tar-1.17-5.1 [ 8s] [31/99] installing xz-libs-5.0.3-2.1 [ 8s] [32/99] installing zlib-1.2.5-2.38 [ 8s] [33/99] installing bash-4.1-4.1 [ 8s] [34/99] installing diffutils-3.0-4.1 [ 8s] [35/99] installing libgomp-4.6-2013.30 [ 8s] [36/99] installing patch-2.6-2.1 [ 8s] [37/99] installing gmp-4.2.1-2.1 [ 8s] [38/99] installing libpcre-7.7-5.1 [ 8s] [39/99] installing ncurses-libs-5.7-5.1 [ 8s] [40/99] installing build-compare-2009.10.14-26.21 [ 8s] [41/99] installing eglibc-headers-2.13-2.7 [ 8s] [42/99] installing grep-2.5.1a-63.1 [ 8s] [43/99] installing libacl-2.2.49-2.1 [ 8s] [44/99] installing libcap-2.21-2.1 [ 8s] [45/99] installing libfile-5.04-3.1 [ 8s] [46/99] installing lzo-minilzo-2.03-2.1 [ 8s] [47/99] installing make-3.82-155.1 [ 9s] [48/99] installing mpfr-3.0.0-2.1 [ 9s] [49/99] installing ncurses-5.7-5.1 [ 9s] [50/99] installing unzip-6.0-10.20 [ 9s] [51/99] installing zlib-devel-1.2.5-2.38 [ 9s] [52/99] installing bzip2-1.0.5-5.1 [ 9s] [53/99] installing libblkid-2.20.2-9.1 [ 9s] [54/99] installing xz-5.0.3-2.1 [ 9s] [55/99] installing binutils-2.22-2.1 [ 9s] [56/99] installing elfutils-libs-0.152-1.47 [ 9s] [57/99] installing ppl-0.11.2-5.1 [ 9s] [58/99] installing nss-3.12.9-3.58 [ 9s] [59/99] installing perl-5.12.1-61.15 [ 10s] [60/99] installing ncurses-base-5.7-5.1 [ 10s] [61/99] installing perl-HTML-Tagset-3.20-8.1 [ 10s] [62/99] installing perl-IO-Compress-Base-2.008-61.15 [ 10s] [63/99] installing perl-Module-Pluggable-3.60-61.15 [ 10s] [64/99] installing perl-Pod-Escapes-1.04-61.15 [ 10s] [65/99] installing perl-TimeDate-1.20-1.1 [ 10s] [66/99] installing eglibc-devel-2.13-2.7 [ 10s] [67/99] installing file-5.04-3.1 [ 10s] [68/99] installing perl-Compress-Raw-Zlib-2.008-61.15 [ 10s] [69/99] installing perl-libs-5.12.1-61.15 [ 10s] [70/99] installing coreutils-6.9-10.7 [ 10s] [71/99] installing libmount-2.20.2-9.1 [ 10s] [72/99] installing lzo-devel-2.03-2.1 [ 10s] [73/99] installing mpc-0.9-2.1 [ 10s] [74/99] installing perl-devel-5.12.1-61.15 [ 11s] [75/99] installing xz-lzma-compat-5.0.3-2.1 [ 11s] [76/99] installing cloog-ppl-0.16.1-3.1 [ 11s] [77/99] installing nss-sysinit-3.12.9-3.58 [ 11s] [78/99] installing ppl-pwl-0.11.2-5.1 [ 11s] [79/99] installing elfutils-0.152-1.47 [ 11s] [80/99] installing eglibc-common-2.13-2.7 [ 11s] [81/99] installing rpm-libs-4.9.1-5.1 [ 16s] [82/99] installing perl-ExtUtils-ParseXS-2.18-61.15 [ 16s] [83/99] installing perl-Pod-Simple-3.07-61.15 [ 16s] [84/99] installing perl-Test-Simple-0.80-61.15 [ 16s] [85/99] installing gawk-3.1.5-1.13 [ 16s] [86/99] installing gzip-1.3.12-2.1 [ 17s] [87/99] installing perl-IO-Compress-Zlib-2.008-61.15 [ 17s] [88/99] installing perl-Test-Harness-3.12-61.15 [ 17s] [89/99] installing rpm-4.9.1-5.1 [ 24s] [90/99] installing build-2011.01.10a-1.1 [ 24s] [91/99] installing util-linux-2.20.2-9.1 [ 25s] [92/99] installing cpp-4.6-2013.30 [ 27s] [93/99] installing perl-ExtUtils-MakeMaker-6.36-61.15 [ 28s] [94/99] installing gcc-4.6-2013.30 [ 30s] [95/99] installing rpm-build-4.9.1-5.1 [ 30s] [96/99] installing automake-1.11.1-3.1 [ 31s] [97/99] installing perl-CPAN-1.9205-61.15 [ 32s] [98/99] installing gcc-c++-4.6-2013.30 [ 37s] [99/99] installing libtool-2.2.6b-2.1 [ 37s] removing nis flags from //etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for autoconf.spec: [ 52s] 4c4 [ 52s] < Release: 1 [ 52s] --- [ 52s] > Release: 1.1 [ 52s] 70a71 [ 52s] > %changelog [ 52s] ----------------------------------------------------------------- [ 52s] ----- building autoconf.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 52s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/emulator/ccddb968f0ee60f2c07feddde3e17f53-autoconf' /home/abuild/rpmbuild/SOURCES/autoconf.spec [ 52s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uJ6Esk [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + rm -rf autoconf-2.68 [ 52s] + /usr/bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.68.tar.bz2 [ 52s] + /bin/tar -xf - [ 52s] + STATUS=0 [ 52s] + '[' 0 -ne 0 ']' [ 52s] + cd autoconf-2.68 [ 52s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 52s] + chmod +x /home/abuild/rpmbuild/SOURCES/filter-provides-automake.sh [ 52s] + chmod +x /home/abuild/rpmbuild/SOURCES/filter-requires-automake.sh [ 52s] + exit 0 [ 52s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XIACyp [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd autoconf-2.68 [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 52s] + export CFLAGS [ 52s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 52s] + export CXXFLAGS [ 52s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 52s] + export FFLAGS [ 52s] + LD_AS_NEEDED=1 [ 52s] + export LD_AS_NEEDED [ 52s] + ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --bindir=/usr/bin --datadir=/usr/share [ 53s] checking for a BSD-compatible install... /usr/bin/install -c [ 54s] checking whether build environment is sane... yes [ 54s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 54s] checking for gawk... gawk [ 54s] checking whether make sets $(MAKE)... yes [ 54s] checking build system type... i686-pc-linux-gnu [ 54s] checking host system type... i686-pc-linux-gnu [ 54s] configure: autobuild project... GNU Autoconf [ 54s] configure: autobuild revision... 2.68 [ 54s] configure: autobuild hostname... w12 [ 54s] configure: autobuild timestamp... 20150203T013926Z [ 54s] checking whether /bin/sh -n is known to work... yes [ 54s] checking for characters that cannot appear in file names... none [ 54s] checking whether directories can have trailing spaces... yes [ 54s] checking for expr... /usr/bin/expr [ 54s] checking for GNU M4 that supports accurate traces... /usr/bin/m4 [ 54s] checking whether /usr/bin/m4 accepts --gnu... yes [ 54s] checking how m4 supports trace files... --debugfile [ 54s] checking for perl... /usr/bin/perl [ 54s] checking whether /usr/bin/perl Fcntl::flock is implemented... yes [ 54s] checking for emacs... no [ 54s] checking for xemacs... no [ 54s] checking for emacs... no [ 54s] checking where .elc files should go... ${datadir}/emacs/site-lisp [ 54s] checking for grep that handles long lines and -e... /bin/grep [ 54s] checking for egrep... /bin/grep -E [ 54s] checking for a sed that does not truncate output... /bin/sed [ 54s] checking whether make is case sensitive... yes [ 54s] configure: creating ./config.status [ 54s] config.status: creating tests/Makefile [ 54s] config.status: creating tests/atlocal [ 54s] config.status: creating man/Makefile [ 54s] config.status: creating lib/emacs/Makefile [ 54s] config.status: creating Makefile [ 54s] config.status: creating doc/Makefile [ 54s] config.status: creating lib/Makefile [ 54s] config.status: creating lib/Autom4te/Makefile [ 54s] config.status: creating lib/autoscan/Makefile [ 54s] config.status: creating lib/m4sugar/Makefile [ 54s] config.status: creating lib/autoconf/Makefile [ 54s] config.status: creating lib/autotest/Makefile [ 54s] config.status: creating bin/Makefile [ 54s] config.status: executing tests/atconfig commands [ 54s] + make [ 54s] echo 2.68 > .version-t && mv .version-t .version [ 54s] make all-recursive [ 54s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 54s] Making all in bin [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 54s] rm -f autom4te autom4te.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autom4te.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autom4te.in; do not edit by hand.|g' ${srcdir}autom4te.in >autom4te.tmp [ 54s] chmod +x autom4te.tmp [ 54s] chmod a-w autom4te.tmp [ 54s] mv autom4te.tmp autom4te [ 54s] cd ../lib && make autom4te.cfg [ 54s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 54s] rm -f autom4te.cfg autom4te.tmp [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@AWK[@]|gawk|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' ./autom4te.in >autom4te.tmp [ 54s] chmod a-w autom4te.tmp [ 54s] mv autom4te.tmp autom4te.cfg [ 54s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 54s] cd ../lib/m4sugar && make version.m4 [ 54s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 54s] :;{ \ [ 54s] echo '# This file is part of -*- Autoconf -*-.' && \ [ 54s] echo '# Version of Autoconf.' && \ [ 54s] echo '# Copyright (C) 1999, 2000, 2001, 2002, 2006, 2007, 2009' && \ [ 54s] echo '# Free Software Foundation, Inc.' && \ [ 54s] echo &&\ [ 54s] echo 'm4_define([m4_PACKAGE_NAME], [GNU Autoconf])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_TARNAME], [autoconf])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_VERSION], [2.68])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_STRING], [GNU Autoconf 2.68])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_BUGREPORT], [bug-autoconf@gnu.org])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_URL], [http://www.gnu.org/software/autoconf/])' && \ [ 54s] echo 'm4_define([m4_PACKAGE_YEAR], ['`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../../ChangeLog`'])'; \ [ 54s] } > version.m4-t [ 54s] mv version.m4-t version.m4 [ 54s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 54s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language M4sh --cache '' --melt ./autoconf.as -o autoconf.in [ 54s] rm -f autoconf autoconf.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autoconf.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoconf.in; do not edit by hand.|g' ${srcdir}autoconf.in >autoconf.tmp [ 54s] chmod +x autoconf.tmp [ 54s] chmod a-w autoconf.tmp [ 54s] mv autoconf.tmp autoconf [ 54s] rm -f autoheader autoheader.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autoheader.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoheader.in; do not edit by hand.|g' ${srcdir}autoheader.in >autoheader.tmp [ 54s] chmod +x autoheader.tmp [ 54s] chmod a-w autoheader.tmp [ 54s] mv autoheader.tmp autoheader [ 54s] rm -f autoreconf autoreconf.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autoreconf.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoreconf.in; do not edit by hand.|g' ${srcdir}autoreconf.in >autoreconf.tmp [ 54s] chmod +x autoreconf.tmp [ 54s] chmod a-w autoreconf.tmp [ 54s] mv autoreconf.tmp autoreconf [ 54s] rm -f ifnames ifnames.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./ifnames.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from ifnames.in; do not edit by hand.|g' ${srcdir}ifnames.in >ifnames.tmp [ 54s] chmod +x ifnames.tmp [ 54s] chmod a-w ifnames.tmp [ 54s] mv ifnames.tmp ifnames [ 54s] rm -f autoscan autoscan.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autoscan.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoscan.in; do not edit by hand.|g' ${srcdir}autoscan.in >autoscan.tmp [ 54s] chmod +x autoscan.tmp [ 54s] chmod a-w autoscan.tmp [ 54s] mv autoscan.tmp autoscan [ 54s] rm -f autoupdate autoupdate.tmp [ 54s] srcdir=''; \ [ 54s] test -f ./autoupdate.in || srcdir=./; \ [ 54s] sed -e 's|@SHELL[@]|/bin/sh|g' -e 's|@PERL[@]|/usr/bin/perl|g' -e 's|@PERL_FLOCK[@]|yes|g' -e 's|@bindir[@]|/usr/bin|g' -e 's|@pkgdatadir[@]|/usr/share/autoconf|g' -e 's|@prefix[@]|/usr|g' -e 's|@autoconf-name[@]|'`echo autoconf | sed 's,x,x,'`'|g' -e 's|@autoheader-name[@]|'`echo autoheader | sed 's,x,x,'`'|g' -e 's|@autom4te-name[@]|'`echo autom4te | sed 's,x,x,'`'|g' -e 's|@M4[@]|/usr/bin/m4|g' -e 's|@M4_DEBUGFILE[@]|--debugfile|g' -e 's|@M4_GNU[@]|--gnu|g' -e 's|@AWK[@]|gawk|g' -e 's|@RELEASE_YEAR[@]|'`sed 's/^\([0-9][0-9][0-9][0-9]\).*/\1/;q' ../ChangeLog`'|g' -e 's|@VERSION[@]|2.68|g' -e 's|@PACKAGE_NAME[@]|GNU Autoconf|g' -e 's|@configure_input[@]|Generated from autoupdate.in; do not edit by hand.|g' ${srcdir}autoupdate.in >autoupdate.tmp [ 54s] chmod +x autoupdate.tmp [ 54s] chmod a-w autoupdate.tmp [ 54s] mv autoupdate.tmp autoupdate [ 54s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 54s] Making all in . [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 54s] make[2]: Nothing to be done for `all-am'. [ 54s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 54s] Making all in lib [ 54s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 54s] Making all in Autom4te [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 55s] make[3]: Nothing to be done for `all'. [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 55s] Making all in m4sugar [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 55s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 55s] --language=m4sugar \ [ 55s] --freeze \ [ 55s] --output=m4sugar.m4f [ 55s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 55s] --language=m4sh \ [ 55s] --freeze \ [ 55s] --output=m4sh.m4f [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 55s] Making all in autoconf [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 55s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 55s] --language=autoconf \ [ 55s] --freeze \ [ 55s] --output=autoconf.m4f [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 55s] Making all in autotest [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 55s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib \ [ 55s] --language=autotest \ [ 55s] --freeze \ [ 55s] --output=autotest.m4f [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 55s] Making all in autoscan [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 55s] echo '# Automatically Generated: do not edit this file' >autoscan.list [ 55s] sed '/^[#]/!q' ./autoscan.pre >>autoscan.list [ 55s] ( \ [ 55s] sed -n '/^[^#]/p' ./autoscan.pre; \ [ 55s] autom4te_perllibdir='../..'/lib AUTOM4TE_CFG='../../lib/autom4te.cfg' ../../bin/autom4te -B '../..'/lib -B '../..'/lib --cache '' -M -l autoconf -t'AN_OUTPUT:$1: $2 $3' \ [ 55s] ) | LC_ALL=C sort >>autoscan.list [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 55s] Making all in emacs [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 55s] WARNING: Warnings can be ignored. :-) [ 55s] if test "no" != no; then \ [ 55s] set x; \ [ 55s] list='autoconf-mode.el autotest-mode.el'; for p in $list; do \ [ 55s] if test -f "$p"; then d=; else d="./"; fi; \ [ 55s] set x "$@" "$d$p"; shift; \ [ 55s] done; \ [ 55s] shift; \ [ 55s] EMACS="no" /bin/sh ../../build-aux/elisp-comp "$@" || exit 1; \ [ 55s] else : ; fi [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 55s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 55s] make[3]: Nothing to be done for `all-am'. [ 55s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 55s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 55s] Making all in doc [ 55s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 55s] make[2]: Nothing to be done for `all'. [ 55s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 55s] Making all in tests [ 55s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 55s] autom4te_perllibdir='..'/lib AUTOM4TE_CFG='../lib/autom4te.cfg' ../bin/autom4te -B '..'/lib -B '..'/lib --language=M4sh ./wrapper.as -o wrapper.in [ 56s] rm -f autoconf autoconf.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autoconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoconf.tmp [ 56s] chmod +x autoconf.tmp [ 56s] chmod a-w autoconf.tmp [ 56s] mv -f autoconf.tmp autoconf [ 56s] rm -f autoheader autoheader.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autoheader|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoheader.tmp [ 56s] chmod +x autoheader.tmp [ 56s] chmod a-w autoheader.tmp [ 56s] mv -f autoheader.tmp autoheader [ 56s] rm -f autom4te autom4te.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autom4te|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autom4te.tmp [ 56s] chmod +x autom4te.tmp [ 56s] chmod a-w autom4te.tmp [ 56s] mv -f autom4te.tmp autom4te [ 56s] rm -f autoreconf autoreconf.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autoreconf|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoreconf.tmp [ 56s] chmod +x autoreconf.tmp [ 56s] chmod a-w autoreconf.tmp [ 56s] mv -f autoreconf.tmp autoreconf [ 56s] rm -f autoscan autoscan.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autoscan|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoscan.tmp [ 56s] chmod +x autoscan.tmp [ 56s] chmod a-w autoscan.tmp [ 56s] mv -f autoscan.tmp autoscan [ 56s] rm -f autoupdate autoupdate.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|autoupdate|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >autoupdate.tmp [ 56s] chmod +x autoupdate.tmp [ 56s] chmod a-w autoupdate.tmp [ 56s] mv -f autoupdate.tmp autoupdate [ 56s] rm -f ifnames ifnames.tmp [ 56s] input=wrapper.in; \ [ 56s] sed -e 's|@wrap_program[@]|ifnames|g' -e 's|@abs_top_srcdir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e 's|@abs_top_builddir[@]|/home/abuild/rpmbuild/BUILD/autoconf-2.68|g' -e "s|@configure_input[@]|Generated from $input.|g" wrapper.in >ifnames.tmp [ 56s] chmod +x ifnames.tmp [ 56s] chmod a-w ifnames.tmp [ 56s] mv -f ifnames.tmp ifnames [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 56s] Making all in man [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] Updating man page autoconf.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autoconf.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autoconf.1.t `echo 'autoconf' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoconf.1 >autoconf.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoconf.1.t | cmp autoconf.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autoconf.1; \ [ 56s] else \ [ 56s] mv autoconf.1.t autoconf.1; \ [ 56s] fi [ 56s] rm -f autoconf.1*.t [ 56s] Updating man page autoheader.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autoheader.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autoheader.1.t `echo 'autoheader' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoheader.1 >autoheader.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoheader.1.t | cmp autoheader.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autoheader.1; \ [ 56s] else \ [ 56s] mv autoheader.1.t autoheader.1; \ [ 56s] fi [ 56s] rm -f autoheader.1*.t [ 56s] Updating man page autom4te.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autom4te.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autom4te.1.t `echo 'autom4te' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autom4te.1 >autom4te.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autom4te.1.t | cmp autom4te.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autom4te.1; \ [ 56s] else \ [ 56s] mv autom4te.1.t autom4te.1; \ [ 56s] fi [ 56s] rm -f autom4te.1*.t [ 56s] Updating man page autoreconf.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autoreconf.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autoreconf.1.t `echo 'autoreconf' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoreconf.1 >autoreconf.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoreconf.1.t | cmp autoreconf.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autoreconf.1; \ [ 56s] else \ [ 56s] mv autoreconf.1.t autoreconf.1; \ [ 56s] fi [ 56s] rm -f autoreconf.1*.t [ 56s] Updating man page autoscan.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autoscan.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autoscan.1.t `echo 'autoscan' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1 >autoscan.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoscan.1.t | cmp autoscan.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autoscan.1; \ [ 56s] else \ [ 56s] mv autoscan.1.t autoscan.1; \ [ 56s] fi [ 56s] rm -f autoscan.1*.t [ 56s] Updating man page autoupdate.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=autoupdate.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=autoupdate.1.t `echo 'autoupdate' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoupdate.1 >autoupdate.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' autoupdate.1.t | cmp autoupdate.1a.t - >/dev/null 2>&1; then \ [ 56s] touch autoupdate.1; \ [ 56s] else \ [ 56s] mv autoupdate.1.t autoupdate.1; \ [ 56s] fi [ 56s] rm -f autoupdate.1*.t [ 56s] Updating man page ifnames.1 [ 56s] PATH="../tests:../build-aux:$PATH"; \ [ 56s] export PATH; \ [ 56s] /bin/sh /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing --run help2man \ [ 56s] --include=ifnames.x \ [ 56s] --include=./common.x \ [ 56s] --source='GNU Autoconf 2.68' \ [ 56s] --output=ifnames.1.t `echo 'ifnames' | sed 's,.*/,,'` [ 56s] /home/abuild/rpmbuild/BUILD/autoconf-2.68/build-aux/missing: line 52: help2man: command not found [ 56s] WARNING: `help2man' is missing on your system. You should only need it if [ 56s] you modified a dependency of a manual page. You may need the [ 56s] `Help2man' package in order for those modifications to take [ 56s] effect. You can get `Help2man' from any GNU archive site. [ 56s] if sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' ifnames.1 >ifnames.1a.t 2>/dev/null && \ [ 56s] sed 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/' ifnames.1.t | cmp ifnames.1a.t - >/dev/null 2>&1; then \ [ 56s] touch ifnames.1; \ [ 56s] else \ [ 56s] mv ifnames.1.t ifnames.1; \ [ 56s] fi [ 56s] rm -f ifnames.1*.t [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] + exit 0 [ 56s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yKNT1G [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd autoconf-2.68 [ 56s] + LANG=C [ 56s] + export LANG [ 56s] + unset DISPLAY [ 56s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 [ 56s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 [ 56s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 install [ 56s] WARNING: unable to verify if 2.68 is the correct version [ 56s] /usr/bin/make install-recursive [ 56s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] Making install in bin [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 56s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/bin" [ 56s] /usr/bin/install -c autom4te autoconf autoheader autoreconf ifnames autoscan autoupdate '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/bin' [ 56s] make[3]: Nothing to be done for `install-data-am'. [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/bin' [ 56s] Making install in . [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] make[3]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf" [ 56s] /usr/bin/install -c -m 644 ./INSTALL '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] Making install in lib [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] Making install in Autom4te [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf/Autom4te" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/Autom4te" [ 56s] /usr/bin/install -c -m 644 C4che.pm ChannelDefs.pm Channels.pm Configure_ac.pm FileUtils.pm General.pm Request.pm Struct.pm XFile.pm '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/Autom4te' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/Autom4te' [ 56s] Making install in m4sugar [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/m4sugar" [ 56s] /usr/bin/install -c -m 644 m4sugar.m4 foreach.m4 m4sh.m4 '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/m4sugar' [ 56s] test -z "/usr/share/autoconf/m4sugar" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/m4sugar" [ 56s] /usr/bin/install -c -m 644 version.m4 m4sugar.m4f m4sh.m4f '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/m4sugar' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/m4sugar' [ 56s] Making install in autoconf [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoconf" [ 56s] /usr/bin/install -c -m 644 autoconf.m4 general.m4 status.m4 oldnames.m4 specific.m4 autoheader.m4 autoupdate.m4 autotest.m4 autoscan.m4 lang.m4 c.m4 erlang.m4 fortran.m4 functions.m4 headers.m4 types.m4 libs.m4 programs.m4 '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoconf' [ 56s] test -z "/usr/share/autoconf/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoconf" [ 56s] /usr/bin/install -c -m 644 autoconf.m4f '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoconf' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoconf' [ 56s] Making install in autotest [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autotest" [ 56s] /usr/bin/install -c -m 644 autotest.m4 general.m4 specific.m4 '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autotest' [ 56s] test -z "/usr/share/autoconf/autotest" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autotest" [ 56s] /usr/bin/install -c -m 644 autotest.m4f '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autotest' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autotest' [ 56s] Making install in autoscan [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf/autoscan" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoscan" [ 56s] /usr/bin/install -c -m 644 autoscan.list '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf/autoscan' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/autoscan' [ 56s] Making install in emacs [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib/emacs' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] make[4]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] make[4]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/autoconf" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf" [ 56s] /usr/bin/install -c -m 644 autom4te.cfg '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/autoconf' [ 56s] make[4]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/lib' [ 56s] Making install in doc [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 56s] make[3]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/info" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/info" [ 56s] /usr/bin/install -c -m 644 ./autoconf.info ./standards.info '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/info' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/doc' [ 56s] Making install in tests [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 56s] make[3]: Nothing to be done for `install-exec-am'. [ 56s] make[3]: Nothing to be done for `install-data-am'. [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/tests' [ 56s] Making install in man [ 56s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] make[3]: Nothing to be done for `install-exec-am'. [ 56s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/man/man1" [ 56s] /usr/bin/install -c -m 644 ./autoconf.1 ./autoheader.1 ./autom4te.1 ./autoreconf.1 ./autoscan.1 ./autoupdate.1 ./ifnames.1 ./config.guess.1 ./config.sub.1 '/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/man/man1' [ 56s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68/man' [ 56s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/autoconf-2.68' [ 56s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/info/dir [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 -regex '.*\.la$' [ 56s] + xargs rm -f -- [ 56s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 -regex '.*\.a$' [ 56s] + xargs rm -f -- [ 56s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/info/dir [ 56s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/emacs [ 56s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386//usr/share/info [ 56s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/autoconf-2.68 [ 56s] + /usr/lib/rpm/check-buildroot [ 56s] + /usr/lib/rpm//brp-compress [ 56s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 56s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 56s] + /usr/lib/rpm/brp-python-hardlink [ 56s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 [ 56s] Processing files: autoconf-2.68-1.1.noarch [ 56s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.lNiGf0 [ 56s] + umask 022 [ 56s] + cd /home/abuild/rpmbuild/BUILD [ 56s] + cd autoconf-2.68 [ 56s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/doc/autoconf-2.68 [ 56s] + export DOCDIR [ 56s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/doc/autoconf-2.68 [ 56s] + cp -pr AUTHORS COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386/usr/share/doc/autoconf-2.68 [ 56s] + exit 0 [ 56s] Finding Provides: /home/abuild/rpmbuild/SOURCES/filter-provides-automake.sh [ 57s] Finding Requires: /home/abuild/rpmbuild/SOURCES/filter-requires-automake.sh [ 57s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 57s] Requires: /bin/sh /usr/bin/perl perl >= 0:5.000 perl >= 0:5.005 perl >= 0:5.005_03 perl(Carp) perl(Cwd) perl(Data::Dumper) perl(DynaLoader) perl(Errno) perl(Exporter) perl(File::Basename) perl(File::Compare) perl(File::Copy) perl(File::Find) perl(File::Path) perl(File::Spec) perl(File::stat) perl(Getopt::Long) perl(IO::File) perl(POSIX) perl(Text::ParseWords) perl(strict) perl(vars) [ 57s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 [ 57s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf-2.68-1.1.src.rpm [ 57s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf-2.68-1.1.noarch.rpm [ 57s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.OTjvg4 [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd autoconf-2.68 [ 57s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf-2.68-1.1.i386 [ 57s] + exit 0 [ 57s] ... checking for files with abuild user/group [ 57s] ... creating baselibs [ 57s] ... saving built statistics [ 57s] ... saving built packages [ 58s] /home/abuild/rpmbuild/RPMS/noarch/autoconf-2.68-1.1.noarch.rpm [ 58s] /home/abuild/rpmbuild/SRPMS/autoconf-2.68-1.1.src.rpm [ 58s] /home/abuild/rpmbuild/OTHER/_statistics [ 59s] [ 59s] w12 finished "build autoconf.spec" at Tue Feb 3 01:39:31 UTC 2015. [ 59s] [ 62s] /.build/build: line 368: 212 Killed background_monitor_process [ 64s] [ 59.675110] SysRq : Power Off [ 64s] [ 59.784208] Power down. [ 66s] build: extracting built packages... [ 66s] autoconf-2.68-1.1.noarch.rpm [ 66s] autoconf-2.68-1.1.src.rpm [ 66s] _statistics Retried build at Mon Feb 2 19:15:17 2015 returned same result, skipped Retried build at Mon Feb 2 19:44:11 2015 returned same result, skipped Retried build at Mon Feb 2 20:22:30 2015 returned same result, skipped Retried build at Mon Feb 2 20:45:13 2015 returned same result, skipped Retried build at Mon Feb 2 21:15:37 2015 returned same result, skipped Retried build at Tue Feb 3 00:35:00 2015 returned same result, skipped Retried build at Tue Feb 3 01:15:50 2015 returned same result, skipped