[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w14 started "build _service:gbs:capi-message-port.spec" at Tue Feb 3 20:23:44 UTC 2015. [ 0s] [ 0s] Building capi-message-port for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '292af34e760868ceff97d19c2fc69a81' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:capi-message-port.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:capi-message-port.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:capi-message-port.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 2s] [16/57] preinstalling nss-softokn-freebl... [ 2s] [17/57] preinstalling popt... [ 2s] [18/57] preinstalling readline... [ 2s] [19/57] preinstalling sed... [ 2s] [20/57] preinstalling sqlite... [ 2s] [21/57] preinstalling tar... [ 2s] [22/57] preinstalling xz-libs... [ 2s] [23/57] preinstalling zlib... [ 2s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 3s] [37/57] preinstalling mpfr-x86-arm... [ 3s] [38/57] preinstalling bzip2-libs-x86-arm... [ 3s] [39/57] preinstalling eglibc-x86-arm... [ 3s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 3s] [41/57] preinstalling libacl-x86-arm... [ 3s] [42/57] preinstalling libattr-x86-arm... [ 3s] [43/57] preinstalling libcap-x86-arm... [ 3s] [44/57] preinstalling libfile-x86-arm... [ 3s] [45/57] preinstalling libgcc-x86-arm... [ 3s] [46/57] preinstalling liblua-x86-arm... [ 3s] [47/57] preinstalling ncurses-libs-x86-arm... [ 3s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 4s] copying packages... [ 5s] reordering...cycle: bash -> eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> bash [ 5s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 5s] breaking dependency eglibc-common -> coreutils [ 5s] cycle: eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> findutils [ 5s] breaking dependency eglibc-common -> findutils [ 5s] cycle: eglibc -> eglibc-common -> grep [ 5s] breaking dependency grep -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 5s] breaking dependency grep -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 5s] breaking dependency libpcre -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 5s] breaking dependency libpcre -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 5s] breaking dependency libstdc++ -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 5s] breaking dependency eglibc-common -> grep [ 5s] cycle: eglibc -> eglibc-common -> libgcc [ 5s] breaking dependency eglibc -> eglibc-common [ 5s] cycle: eglibc -> libgcc [ 5s] breaking dependency libgcc -> eglibc [ 5s] cycle: filesystem -> setup [ 5s] breaking dependency setup -> filesystem [ 5s] cycle: ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses [ 5s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses-base [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl -> perl-libs [ 5s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 5s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl -> perl-IO-Compress-Zlib [ 5s] breaking dependency perl -> perl-IO-Compress-Zlib [ 5s] cycle: perl -> perl-IO-Compress-Base [ 5s] breaking dependency perl -> perl-IO-Compress-Base [ 5s] cycle: perl -> perl-Module-Pluggable [ 5s] breaking dependency perl -> perl-Module-Pluggable [ 5s] cycle: perl -> perl-Pod-Simple [ 5s] breaking dependency perl -> perl-Pod-Simple [ 5s] cycle: dbus -> dbus-libs [ 5s] breaking dependency dbus -> dbus-libs [ 5s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 5s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 5s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 5s] cycle: nss -> nss-sysinit [ 5s] breaking dependency nss -> nss-sysinit [ 5s] cycle: perl-CPAN -> perl-Test-Harness [ 5s] breaking dependency perl-Test-Harness -> perl-CPAN [ 5s] cycle: rpm-libs -> rpm [ 5s] breaking dependency rpm-libs -> rpm [ 5s] cycle: system-resource -> libresourced [ 5s] breaking dependency libresourced -> system-resource [ 5s] cycle: system-resource -> system-resource-resourced [ 5s] breaking dependency system-resource-resourced -> system-resource [ 5s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 5s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 5s] done [ 6s] booting kvm ... [ 6s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4863/2392064 files, 245260/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: armv7l [ 9s] /.build/build: line 770: mount: command not found [ 9s] swapon on /dev/vdb [ 9s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 9s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 9s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 9s] logging output to //.build.log... [ 9s] processing specfile /.build-srcdir/_service:gbs:capi-message-port.spec ... [ 9s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-message-port.spec build rpmlint-Factory ... [ 10s] running rpm-x86-arm postinstall script [ 10s] running rpm-libs-x86-arm postinstall script [ 10s] running tizen-accelerator postinstall script [ 11s] running bash-x86-arm postinstall script [ 11s] initializing rpm db... [ 17s] [1/232] installing cross-armv7l-platformfile-0.0.1-1.1 [ 17s] [2/232] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 17s] [3/232] installing libX11-common-1.5.0-1.1 [ 17s] [4/232] installing tizen-release-2.2.0-1.1 [ 17s] [5/232] installing tzdata-2013h-1.1 [ 18s] [6/232] installing libgcc-4.6.4-1.15 [ 18s] [7/232] installing setup-0.1-1.1 [ 18s] [8/232] installing filesystem-0.1-1.1 [ 18s] warning: group lock does not exist - using root [ 18s] [9/232] installing eglibc-2.13-1.11 [ 18s] [10/232] installing libstdc++-4.6.4-1.15 [ 18s] [11/232] installing eglibc-common-2.13-1.11 [ 19s] [12/232] installing libstdc++-devel-4.6.4-1.15 [ 19s] [13/232] installing opengl-es-virtual-drv-0.1.6-1.4 [ 19s] [14/232] installing bash-4.1-1.1 [ 19s] [15/232] installing bzip2-libs-1.0.5-1.2 [ 19s] [16/232] installing c-ares-1.10.0_4-1.1 [ 19s] [17/232] installing capi-base-common-0.1.7-1.1 [ 19s] [18/232] installing cpio-2.8-1.1 [ 19s] [19/232] installing diffutils-3.0-1.1 [ 20s] [20/232] installing e2fsprogs-libs-1.41.9-1.2 [ 20s] [21/232] installing elfutils-libelf-0.152-1.9 [ 20s] [22/232] installing expat-2.0.1-1.2 [ 20s] [23/232] installing fdupes-1.40-1.1 [ 20s] [24/232] installing findutils-4.2.31-1.1 [ 20s] [25/232] installing fribidi-0.19.6-1.1 [ 20s] [26/232] installing gdbm-1.8.3-1.3 [ 20s] [27/232] installing libXau-1.0.7-1.1 [ 20s] [28/232] installing libattr-2.4.44-1.2 [ 20s] [29/232] installing libffi-3.0.9-1.1 [ 21s] [30/232] installing libgomp-4.6.4-1.15 [ 21s] [31/232] installing libidn-1.15-1.1 [ 21s] [32/232] installing libjpeg-turbo-1.2.0-1.1 [ 21s] [33/232] installing liblua-5.1.4-1.2 [ 21s] [34/232] installing libuuid-2.20.2-1.1 [ 21s] [35/232] installing lzo-2.03-1.3 [ 21s] [36/232] installing m4-1.4.14-1.1 [ 21s] [37/232] installing net-tools-1.60-1.2 [ 21s] [38/232] installing nspr-4.9-1.10 [ 22s] [39/232] installing nss-softokn-freebl-3.12.9-1.13 [ 22s] [40/232] installing openssl-1.0.1k-1.6 [ 22s] [41/232] installing patch-2.6-1.1 [ 22s] [42/232] installing pixman-0.28.2-1.1 [ 22s] [43/232] installing pkg-config-0.25-1.2 [ 22s] [44/232] installing popt-1.16-1.2 [ 22s] [45/232] installing readline-5.2-1.2 [ 22s] [46/232] installing sed-4.1.5-1.1 [ 22s] [47/232] installing smack-1.0+s14-1.2 [ 22s] [48/232] installing sqlite-3.7.13-1.2 [ 23s] [49/232] installing tar-1.17-1.2 [ 23s] [50/232] installing xz-libs-5.0.3-1.3 [ 23s] [51/232] installing zlib-1.2.5-1.10 [ 23s] [52/232] installing chromium-1.0-1.1 [ 23s] [53/232] installing gmp-4.2.1-1.2 [ 23s] [54/232] installing libpcre-7.7-1.3 [ 23s] [55/232] installing ncurses-libs-5.7-1.2 [ 23s] [56/232] installing build-compare-2009.10.14-1.5 [ 23s] [57/232] installing qemu.x86_64-1.2-2.1 [ 25s] [58/232] installing vconf-internal-keys-devel-0.0.150-1.1 [ 25s] [59/232] installing capi-base-common-devel-0.1.7-1.1 [ 26s] [60/232] installing chromium-devel-1.0-1.1 [ 26s] [61/232] installing eglibc-headers-2.13-1.11 [ 26s] [62/232] installing libcap-2.21-1.2 [ 26s] [63/232] installing sqlite-devel-3.7.13-1.2 [ 26s] [64/232] installing unzip-6.0-1.7 [ 26s] [65/232] installing zlib-devel-1.2.5-1.10 [ 26s] [66/232] installing freetype-2.4.9-1.1 [ 26s] [67/232] installing grep-2.5.1a-1.1 [ 26s] [68/232] installing libacl-2.2.49-1.2 [ 26s] [69/232] installing libfile-5.04-1.2 [ 27s] [70/232] installing libiri-1.7-1.1 [ 27s] [71/232] installing libpng-1.2.50-1.1 [ 27s] [72/232] installing libxcb-1.8.1-1.1 [ 27s] [73/232] installing libxml2-2.7.8-1.2 [ 27s] [74/232] installing lzo-minilzo-2.03-1.3 [ 27s] [75/232] installing make-3.82-1.2 [ 27s] [76/232] installing mpfr-3.0.0-1.2 [ 27s] [77/232] installing ncurses-5.7-1.2 [ 28s] [78/232] installing systemd-libs-210-5.4 [ 28s] [79/232] installing bzip2-1.0.5-1.2 [ 28s] [80/232] installing glib2-2.32.3-1.2 [ 28s] [81/232] installing kmod-libs-15-1.1 [ 28s] [82/232] installing libblkid-2.20.2-1.1 [ 28s] [83/232] installing libicu-51-1.2 [ 29s] [84/232] installing smack-utils-1.0+s14-1.2 [ 29s] [85/232] installing xz-5.0.3-1.3 [ 29s] [86/232] installing binutils-2.22-1.5 [ 29s] [87/232] installing elfutils-libs-0.152-1.9 [ 29s] [88/232] installing libcurl-7.28.1_26-1.1 [ 29s] [89/232] installing nss-3.12.9-1.13 [ 29s] [90/232] installing perl-5.12.1-1.4 [ 30s] [91/232] installing ncurses-base-5.7-1.2 [ 30s] [92/232] installing perl-HTML-Tagset-3.20-1.1 [ 31s] [93/232] installing perl-IO-Compress-Base-2.008-1.4 [ 31s] [94/232] installing perl-Module-Pluggable-3.60-1.4 [ 31s] [95/232] installing perl-Pod-Escapes-1.04-1.4 [ 31s] [96/232] installing perl-TimeDate-1.20-1.1 [ 31s] [97/232] installing eglibc-devel-2.13-1.11 [ 31s] [98/232] installing libicu-devel-51-1.2 [ 31s] [99/232] installing smack-privilege-config-1.0.8-1.1 [ 31s] /var/tmp/rpm-tmp.0LEOYP: line 2: which: command not found [ 31s] api_feature_loader not present [ 31s] [100/232] installing file-5.04-1.2 [ 31s] [101/232] installing lzo-devel-2.03-1.3 [ 31s] [102/232] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 32s] [103/232] installing perl-devel-5.12.1-1.4 [ 32s] [104/232] installing perl-libs-5.12.1-1.4 [ 32s] [105/232] installing coreutils-6.9-1.5 [ 32s] [106/232] installing libX11-1.5.0-1.1 [ 32s] [107/232] installing libdlog-0.4.1-1.1 [ 32s] [108/232] installing libmount-2.20.2-1.1 [ 32s] [109/232] installing mpc-0.9-1.2 [ 32s] [110/232] installing xz-lzma-compat-5.0.3-1.3 [ 33s] [111/232] installing elfutils-0.152-1.9 [ 33s] [112/232] installing harfbuzz-0.9.7-1.1 [ 33s] [113/232] installing nss-sysinit-3.12.9-1.13 [ 33s] [114/232] installing libarchive-2.8.3-1.1 [ 33s] [115/232] installing rpm-libs-4.9.1-1.1 [ 33s] [116/232] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 33s] [117/232] installing perl-Pod-Simple-3.07-1.4 [ 33s] [118/232] installing perl-Test-Simple-0.80-1.4 [ 34s] [119/232] installing tizen-accelerator-1.0.1-1.1 [ 34s] [120/232] installing eina-1.7.1+svn.77445+build35-1.1 [ 34s] [121/232] installing giflib-4.1.6-1.1 [ 34s] [122/232] installing libXcomposite-0.4.4-1.1 [ 34s] [123/232] installing libXdamage-1.1.3-1.1 [ 34s] [124/232] installing libXext-1.3.1-1.1 [ 35s] [125/232] installing libXfixes-5.0-1.1 [ 35s] [126/232] installing libXrender-0.9.7-1.1 [ 35s] [127/232] installing libdlog-devel-0.4.1-1.1 [ 35s] [128/232] installing message-port-1.2.2.1-1.1 [ 35s] [129/232] installing perl-IO-Compress-Zlib-2.008-1.4 [ 35s] [130/232] installing perl-Test-Harness-3.12-1.4 [ 35s] [131/232] installing gawk-3.1.5-1.4 [ 35s] [132/232] installing gzip-1.3.12-1.1 [ 35s] [133/232] installing xdgmime-0.0.12-1.1 [ 36s] [134/232] installing app-checker-0.0.20-1.1 [ 36s] [135/232] installing build-2011.01.10a-1.1 [ 36s] [136/232] installing bundle-0.1.35-1.1 [ 36s] [137/232] installing rpm-4.9.1-1.1 [ 36s] [138/232] installing cpp-4.6.4-1.15 [ 36s] [139/232] installing libslp-db-util-0.1.8-1.1 [ 37s] [140/232] installing dbus-1.6.4-1.1 [ 37s] [141/232] installing util-linux-2.20.2-1.1 [ 37s] [142/232] installing cmake-2.8.5-1.1 [ 37s] [143/232] installing fontconfig-2.9.0-1.1 [ 40s] /opt/var/cache/fontconfig/*: No such file or directory [ 40s] [144/232] installing glib2-devel-2.32.3-1.2 [ 40s] [145/232] installing libprivilege-control-0.0.89-1.1 [ 49s] Applying sql update files on db [ 49s] /opt/dbspace/.rules-db.db3 [ 49s] Creating database from scratch [ 49s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 49s] Done. [ 49s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 49s] Done. [ 49s] [146/232] installing bundle-devel-0.1.35-1.1 [ 49s] [147/232] installing xdgmime-devel-0.0.12-1.1 [ 49s] [148/232] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 49s] [149/232] installing dbus-libs-1.6.4-1.1 [ 49s] [150/232] installing eglibc-x86-arm-2.13-1.2 [ 49s] [151/232] installing elfutils-libelf-x86-arm-0.152-1.1 [ 50s] [152/232] installing elfutils-libs-x86-arm-0.152-1.2 [ 50s] [153/232] installing gmp-x86-arm-4.2.1-1.1 [ 50s] [154/232] installing libacl-x86-arm-2.2.49-1.1 [ 50s] [155/232] installing libattr-x86-arm-2.4.44-1.1 [ 50s] [156/232] installing libcap-x86-arm-2.21-1.1 [ 50s] [157/232] installing libfile-x86-arm-5.04-1.2 [ 50s] [158/232] installing libgcc-x86-arm-4.6.4-1.1 [ 50s] [159/232] installing liblua-x86-arm-5.1.4-1.1 [ 51s] [160/232] installing mpc-x86-arm-0.9-1.1 [ 51s] [161/232] installing mpfr-x86-arm-3.0.0-1.1 [ 51s] [162/232] installing ncurses-libs-x86-arm-5.7-1.2 [ 51s] [163/232] installing nspr-x86-arm-4.9-1.2 [ 51s] [164/232] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 51s] [165/232] installing nss-x86-arm-3.12.9-1.2 [ 52s] [166/232] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 52s] [167/232] installing popt-x86-arm-1.16-1.1 [ 52s] [168/232] installing rpm-libs-x86-arm-4.9.1-1.2 [ 52s] [169/232] installing sqlite-x86-arm-3.7.13-1.1 [ 52s] [170/232] installing xz-libs-x86-arm-5.0.3-1.1 [ 52s] [171/232] installing zlib-x86-arm-1.2.5-1.1 [ 52s] [172/232] installing ecore-1.7.1+svn.77580+build125-7.1 [ 52s] [173/232] installing libXgesture-0.1.1-1.1 [ 53s] [174/232] installing libXi-1.6.1-1.1 [ 53s] [175/232] installing libXinerama-1.1.2-1.1 [ 53s] [176/232] installing libXtst-1.2.0-1.1 [ 53s] [177/232] installing libXv-1.0.7-1.1 [ 53s] [178/232] installing app-checker-server-0.0.20-1.1 [ 53s] [179/232] installing eet-1.7.1+svn.77495+build14-3.8 [ 53s] [180/232] installing libXcursor-1.1.13-1.1 [ 53s] [181/232] installing libXrandr-1.4.0-1.1 [ 53s] [182/232] installing librua-0.1.8-1.1 [ 53s] [183/232] installing libslp-db-util-devel-0.1.8-1.1 [ 53s] [184/232] installing systemd-210-5.4 [ 54s] [185/232] installing gcc-4.6.4-1.15 [ 54s] [186/232] installing rpm-build-4.9.1-1.1 [ 55s] [187/232] installing libjournal-0.1.0-1.1 [ 55s] [188/232] installing perl-CPAN-1.9205-1.4 [ 55s] [189/232] installing bash-x86-arm-4.1-1.1 [ 55s] [190/232] installing dbus-glib-0.100-1.1 [ 55s] [191/232] installing ecore-input-1.7.1+svn.77580+build125-7.1 [ 55s] [192/232] installing fdupes-x86-arm-1.40-1.1 [ 55s] [193/232] installing findutils-x86-arm-4.2.31-1.1 [ 56s] [194/232] installing gawk-x86-arm-3.1.5-1.2 [ 56s] [195/232] installing gzip-x86-arm-1.3.12-1.1 [ 56s] [196/232] installing make-x86-arm-3.82-1.1 [ 56s] [197/232] installing sed-x86-arm-4.1.5-1.1 [ 56s] [198/232] installing tar-x86-arm-1.17-1.2 [ 56s] [199/232] installing diffutils-x86-arm-3.0-1.1 [ 57s] [200/232] installing patch-x86-arm-2.6-1.1 [ 57s] [201/232] installing autoconf-2.68-1.1 [ 57s] [202/232] installing coreutils-x86-arm-6.9-1.1 [ 59s] [203/232] installing ecore-con-1.7.1+svn.77580+build125-7.1 [ 59s] [204/232] installing file-x86-arm-5.04-1.1 [ 60s] [205/232] installing libslp-utilx-0.4.5-1.1 [ 60s] [206/232] installing vconf-0.2.83-1.1 [ 60s] Failed to get D-Bus connection: Unknown error 4294967295 [ 60s] warning: %post(vconf-0.2.83-1.1.armv7l) scriptlet failed, exit status 1 [ 60s] [207/232] installing elfutils-x86-arm-0.152-1.2 [ 60s] [208/232] installing gcc-c++-4.6.4-1.15 [ 60s] [209/232] installing security-server-0.0.125-1.1 [ 60s] Failed to get D-Bus connection: Unknown error 4294967295 [ 60s] Failed to get D-Bus connection: Unknown error 4294967295 [ 60s] [210/232] installing evas-1.7.1+svn.77561+build187-10.1 [ 60s] [211/232] installing rpm-x86-arm-4.9.1-1.2 [ 61s] /bin/rpm.orig-arm already present - skipping. [ 61s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 61s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 61s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 61s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 61s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 61s] [212/232] installing rpm-build-x86-arm-4.9.1-1.2 [ 61s] [213/232] installing vconf-keys-devel-0.2.83-1.1 [ 61s] [214/232] installing automake-1.11.1-1.1 [ 61s] [215/232] installing ecore-file-1.7.1+svn.77580+build125-7.1 [ 61s] [216/232] installing libsecurity-server-client-0.0.125-1.1 [ 61s] [217/232] installing edbus-1.6.0+svn.76526slp2+build10-1.1 [ 61s] [218/232] installing ail-0.2.95-1.1 [ 61s] [219/232] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 62s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 62s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 62s] [220/232] installing pkgmgr-info-0.0.230-1.1 [ 62s] [221/232] installing ecore-x-1.7.1+svn.77580+build125-7.1 [ 63s] [222/232] installing libtool-2.2.6b-1.2 [ 63s] [223/232] installing vconf-devel-0.2.83-1.1 [ 63s] [224/232] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 64s] [225/232] installing libresourced-0.2.86-1.1 [ 64s] [226/232] installing pkgmgr-info-parser-0.0.230-1.1 [ 64s] [227/232] installing ail-devel-0.2.95-1.1 [ 64s] [228/232] installing system-resource-resourced-0.2.86-1.1 [ 64s] [229/232] installing aul-0.2.3.0-1.1 [ 64s] [230/232] installing system-resource-0.2.86-1.1 [ 64s] [231/232] installing aul-devel-0.2.3.0-1.1 [ 64s] [232/232] installing message-port-devel-1.2.2.1-1.1 [ 64s] removing nis flags from //etc/nsswitch.conf... [ 64s] now finalizing build dir... [ 65s] /.build/build: line 2585: mount: command not found [ 65s] /.build/build: line 2586: mount: command not found [ 68s] build target is armv7l-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for capi-message-port.spec: [ 68s] 5c5 [ 68s] < Release: 2 [ 68s] --- [ 68s] > Release: 1.1 [ 68s] ----------------------------------------------------------------- [ 68s] ----- building capi-message-port.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 68s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/292af34e760868ceff97d19c2fc69a81-capi-message-port' /home/abuild/rpmbuild/SOURCES/capi-message-port.spec [ 68s] Building target platforms: armv7l-tizen-linux [ 68s] Building for target armv7l-tizen-linux [ 68s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qPeqgD [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + rm -rf capi-message-port-1.2.2.1 [ 68s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-message-port-1.2.2.1.tar.gz [ 68s] + /bin/tar -xf - [ 68s] + STATUS=0 [ 68s] + '[' 0 -ne 0 ']' [ 68s] + cd capi-message-port-1.2.2.1 [ 68s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 68s] + cp /home/abuild/rpmbuild/SOURCES/capi-message-port.manifest . [ 68s] + exit 0 [ 68s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.vmy3nq [ 68s] + umask 022 [ 68s] + cd /home/abuild/rpmbuild/BUILD [ 68s] + cd capi-message-port-1.2.2.1 [ 68s] + LANG=C [ 68s] + export LANG [ 68s] + unset DISPLAY [ 68s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CFLAGS [ 68s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CXXFLAGS [ 68s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 68s] + export FFLAGS [ 68s] + LD_AS_NEEDED=1 [ 68s] + export LD_AS_NEEDED [ 68s] ++ echo 1.2.2.1 [ 68s] ++ awk 'BEGIN {FS="."}{print $1}' [ 68s] + MAJORVER=1 [ 68s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE' [ 68s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 68s] + export CFLAGS [ 68s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE' [ 68s] + export CXXFLAGS [ 68s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 68s] + export FFLAGS [ 68s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=1.2.2.1 -DMAJORVER=1 [ 68s] -- The C compiler identification is GNU [ 68s] -- The CXX compiler identification is GNU [ 68s] -- Check for working C compiler: /usr/bin/gcc [ 69s] -- Check for working C compiler: /usr/bin/gcc -- works [ 69s] -- Detecting C compiler ABI info [ 69s] -- Detecting C compiler ABI info - done [ 69s] -- Check for working CXX compiler: /usr/bin/c++ [ 69s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 69s] -- Detecting CXX compiler ABI info [ 70s] -- Detecting CXX compiler ABI info - done [ 70s] -- checking for module 'message-port dlog' [ 70s] -- found message-port dlog, version 1.2.2.1;1.0 [ 71s] -- Configuring done [ 71s] -- Generating done [ 71s] CMake Warning: [ 71s] Manually-specified variables were not used by the project: [ 71s] [ 71s] CMAKE_INSTALL_LIBDIR [ 71s] SHARE_INSTALL_PREFIX [ 71s] SYSCONF_INSTALL_DIR [ 71s] [ 71s] [ 71s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 [ 71s] + make -j4 [ 71s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 -B/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 71s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles/progress.marks [ 71s] make -f CMakeFiles/Makefile2 all [ 71s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 71s] make -f src/CMakeFiles/capi-message-port.dir/build.make src/CMakeFiles/capi-message-port.dir/depend [ 71s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 71s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src/CMakeFiles/capi-message-port.dir/DependInfo.cmake --color= [ 71s] Scanning dependencies of target capi-message-port [ 71s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 71s] make -f src/CMakeFiles/capi-message-port.dir/build.make src/CMakeFiles/capi-message-port.dir/build [ 71s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 71s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 1 [ 71s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 2 [ 71s] [100%] [100%] Building CXX object src/CMakeFiles/capi-message-port.dir/message_port.cpp.o [ 71s] Building CXX object src/CMakeFiles/capi-message-port.dir/message_port_internal.cpp.o [ 71s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src && /usr/bin/c++ -Dcapi_message_port_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/aul -I/usr/include/chromium -I/usr/include/vconf -I/usr/include/db-util -fPIC -Wall -Werror -fvisibility=hidden -fvisibility-inlines-hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/include -o CMakeFiles/capi-message-port.dir/message_port.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src/message_port.cpp [ 71s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src && /usr/bin/c++ -Dcapi_message_port_EXPORTS -DPREFIX=\"/usr\" -DSLP_DEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/aul -I/usr/include/chromium -I/usr/include/vconf -I/usr/include/db-util -fPIC -Wall -Werror -fvisibility=hidden -fvisibility-inlines-hidden -fPIC -I/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/include -o CMakeFiles/capi-message-port.dir/message_port_internal.cpp.o -c /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src/message_port_internal.cpp [ 72s] Linking CXX shared library ../cmake_build_tmp/output/libcapi-message-port.so [ 72s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src && /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-message-port.dir/link.txt --verbose=1 [ 72s] /usr/bin/c++ -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -D_SECURE_LOG -DTIZEN_DEBUG_ENABLE -I/usr/include/appfw -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/aul -I/usr/include/chromium -I/usr/include/vconf -I/usr/include/db-util -fPIC -Wall -Werror -fvisibility=hidden -fvisibility-inlines-hidden -Wl,--no-undefined -Wl,--as-needed -shared -Wl,-soname,libcapi-message-port.so.1 -o ../cmake_build_tmp/output/libcapi-message-port.so.1.2.2.1 CMakeFiles/capi-message-port.dir/message_port_internal.cpp.o CMakeFiles/capi-message-port.dir/message_port.cpp.o -L/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/cmake_build_tmp/output -lmessage-port -laul -lchromium -lbundle -lail -lxdgmime -lvconf -lSLP-db-util -lsqlite3 -lglib-2.0 -licui18n -licuuc -licudata -ldlog -lpthread -lcapi-base-common [ 72s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src && /usr/bin/cmake -E cmake_symlink_library ../cmake_build_tmp/output/libcapi-message-port.so.1.2.2.1 ../cmake_build_tmp/output/libcapi-message-port.so.1 ../cmake_build_tmp/output/libcapi-message-port.so [ 72s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 1 2 [ 72s] [100%] Built target capi-message-port [ 72s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 0 [ 72s] + exit 0 [ 72s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.mD25Rs [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd capi-message-port-1.2.2.1 [ 72s] + LANG=C [ 72s] + export LANG [ 72s] + unset DISPLAY [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 72s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 72s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/share/license [ 72s] + install LICENSE.Apache-2.0 /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/share/license/capi-message-port [ 72s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm install [ 72s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 -B/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 --check-build-system CMakeFiles/Makefile.cmake 0 [ 72s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles/progress.marks [ 72s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 72s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/make -f src/CMakeFiles/capi-message-port.dir/build.make src/CMakeFiles/capi-message-port.dir/depend [ 72s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] cd /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/src/CMakeFiles/capi-message-port.dir/DependInfo.cmake --color= [ 72s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/make -f src/CMakeFiles/capi-message-port.dir/build.make src/CMakeFiles/capi-message-port.dir/build [ 72s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] make[2]: Nothing to be done for `src/CMakeFiles/capi-message-port.dir/build'. [ 72s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 1 2 [ 72s] [100%] Built target capi-message-port [ 72s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1/CMakeFiles 0 [ 72s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 72s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] make[1]: Nothing to be done for `preinstall'. [ 72s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1' [ 72s] Install the project... [ 72s] /usr/bin/cmake -P cmake_install.cmake [ 72s] -- Install configuration: "" [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib/pkgconfig/capi-message-port.pc [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/include/appfw [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/include/appfw/message_port_internal.h [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/include/appfw/message_port.h [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib/libcapi-message-port.so.1.2.2.1 [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib/libcapi-message-port.so.1 [ 72s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib/libcapi-message-port.so [ 72s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/share/info/dir [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm -regex '.*\.la$' [ 72s] + xargs rm -f -- [ 72s] + find /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm -regex '.*\.a$' [ 72s] + xargs rm -f -- [ 72s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-message-port-1.2.2.1 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm/usr/lib/libcapi-message-port.so.1.2.2.1 [ 73s] symlinked /usr/lib/debug/usr/lib/libcapi-message-port.so.1.2.2.1.debug to /usr/lib/debug/usr/lib/libcapi-message-port.so.1.debug [ 73s] symlinked /usr/lib/debug/usr/lib/libcapi-message-port.so.1.2.2.1.debug to /usr/lib/debug/usr/lib/libcapi-message-port.so.debug [ 73s] 61 blocks [ 73s] + /usr/lib/rpm/check-buildroot [ 73s] + /usr/lib/rpm//brp-compress [ 73s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 73s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 73s] + /usr/lib/rpm/brp-python-hardlink [ 73s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 73s] Processing files: capi-message-port-1.2.2.1-1.1.armv7l [ 73s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 73s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 73s] [ 73s] Provides: libcapi-message-port.so.1 libcapi-message-port.so.1 [ 73s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires(post): /sbin/ldconfig /sbin/ldconfig coreutils [ 73s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires: libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libcapi-message-port.so.1 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libmessage-port.so.1 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) [ 73s] Processing files: capi-message-port-devel-1.2.2.1-1.1.armv7l [ 73s] Provides: pkgconfig(capi-message-port) = 1.2.2.1 [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /usr/bin/pkg-config libcapi-message-port.so.1 pkgconfig(dlog) pkgconfig(message-port) [ 73s] Processing files: capi-message-port-debuginfo-1.2.2.1-1.1.armv7l [ 73s] Processing files: capi-message-port-debugsource-1.2.2.1-1.1.armv7l [ 73s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 73s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-message-port-1.2.2.1-1.1.src.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-1.2.2.1-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-devel-1.2.2.1-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-debuginfo-1.2.2.1-1.1.armv7l.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-debugsource-1.2.2.1-1.1.armv7l.rpm [ 73s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6dYY27 [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd capi-message-port-1.2.2.1 [ 73s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-message-port-1.2.2.1-1.1.arm [ 73s] + exit 0 [ 73s] ... checking for files with abuild user/group [ 73s] ... creating baselibs [ 74s] ... saving built statistics [ 74s] /.build/build: line 3144: mount: command not found [ 74s] ERROR: no root disk device found, yet another new device name? [ 74s] ls: cannot access /sys/block/: No such file or directory [ 74s] /.build/build: line 3159: umount: command not found [ 74s] ... saving built packages [ 74s] /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-1.2.2.1-1.1.armv7l.rpm [ 74s] /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-debuginfo-1.2.2.1-1.1.armv7l.rpm [ 74s] /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-debugsource-1.2.2.1-1.1.armv7l.rpm [ 74s] /home/abuild/rpmbuild/RPMS/armv7l/capi-message-port-devel-1.2.2.1-1.1.armv7l.rpm [ 74s] /home/abuild/rpmbuild/SRPMS/capi-message-port-1.2.2.1-1.1.src.rpm [ 74s] /home/abuild/rpmbuild/OTHER/_statistics [ 74s] [ 74s] w14 finished "build capi-message-port.spec" at Tue Feb 3 20:24:57 UTC 2015. [ 74s] [ 77s] [ 70.233998] SysRq : Power Off [ 78s] [ 70.244266] Power down. [ 78s] build: extracting built packages... [ 78s] capi-message-port-1.2.2.1-1.1.armv7l.rpm [ 78s] capi-message-port-debuginfo-1.2.2.1-1.1.armv7l.rpm [ 78s] capi-message-port-debugsource-1.2.2.1-1.1.armv7l.rpm [ 78s] capi-message-port-devel-1.2.2.1-1.1.armv7l.rpm [ 78s] capi-message-port-1.2.2.1-1.1.src.rpm [ 78s] _statistics Retried build at Wed Feb 4 05:08:05 2015 returned same result, skipped Retried build at Thu Feb 5 22:31:17 2015 returned same result, skipped