[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w05 started "build _service:gbs:eio.spec" at Tue Feb 3 20:08:22 UTC 2015. [ 0s] [ 0s] Building eio for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 'a86d6e81e2caa89c7374622e3b5e1893' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:eio.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:eio.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:eio.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 8 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 4806/2392064 files, 242379/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: armv7l [ 8s] /.build/build: line 770: mount: command not found [ 8s] swapon on /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:eio.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:eio.spec build rpmlint-Factory ... [ 9s] running rpm-x86-arm postinstall script [ 9s] running rpm-libs-x86-arm postinstall script [ 9s] running tizen-accelerator postinstall script [ 9s] running bash-x86-arm postinstall script [ 9s] initializing rpm db... [ 13s] [1/204] installing cross-armv7l-platformfile-0.0.1-1.1 [ 14s] [2/204] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 14s] [3/204] installing libX11-common-1.5.0-1.1 [ 14s] [4/204] installing tizen-release-2.2.0-1.1 [ 14s] [5/204] installing tzdata-2013h-1.1 [ 14s] [6/204] installing libgcc-4.6.4-1.15 [ 14s] [7/204] installing setup-0.1-1.1 [ 14s] [8/204] installing filesystem-0.1-1.1 [ 14s] warning: group lock does not exist - using root [ 14s] [9/204] installing eglibc-2.13-1.11 [ 14s] [10/204] installing libstdc++-4.6.4-1.15 [ 15s] [11/204] installing eglibc-common-2.13-1.11 [ 15s] [12/204] installing libstdc++-devel-4.6.4-1.15 [ 15s] [13/204] installing opengl-es-virtual-drv-0.1.6-1.4 [ 15s] [14/204] installing bash-4.1-1.1 [ 15s] [15/204] installing bzip2-libs-1.0.5-1.2 [ 15s] [16/204] installing c-ares-1.10.0_4-1.1 [ 15s] [17/204] installing capi-base-common-0.1.7-1.1 [ 15s] [18/204] installing cpio-2.8-1.1 [ 15s] [19/204] installing diffutils-3.0-1.1 [ 15s] [20/204] installing e2fsprogs-libs-1.41.9-1.2 [ 16s] [21/204] installing elfutils-libelf-0.152-1.9 [ 16s] [22/204] installing expat-2.0.1-1.2 [ 16s] [23/204] installing fdupes-1.40-1.1 [ 16s] [24/204] installing findutils-4.2.31-1.1 [ 16s] [25/204] installing fribidi-0.19.6-1.1 [ 16s] [26/204] installing gdbm-1.8.3-1.3 [ 16s] [27/204] installing libXau-1.0.7-1.1 [ 16s] [28/204] installing libattr-2.4.44-1.2 [ 16s] [29/204] installing libffi-3.0.9-1.1 [ 16s] [30/204] installing libgomp-4.6.4-1.15 [ 16s] [31/204] installing libidn-1.15-1.1 [ 16s] [32/204] installing libjpeg-turbo-1.2.0-1.1 [ 16s] [33/204] installing liblua-5.1.4-1.2 [ 17s] [34/204] installing libuuid-2.20.2-1.1 [ 17s] [35/204] installing lzo-2.03-1.3 [ 17s] [36/204] installing m4-1.4.14-1.1 [ 17s] [37/204] installing net-tools-1.60-1.2 [ 17s] [38/204] installing nspr-4.9-1.10 [ 17s] [39/204] installing nss-softokn-freebl-3.12.9-1.13 [ 17s] [40/204] installing openssl-1.0.1k-1.6 [ 17s] [41/204] installing patch-2.6-1.1 [ 17s] [42/204] installing pixman-0.28.2-1.1 [ 17s] [43/204] installing pkg-config-0.25-1.2 [ 17s] [44/204] installing popt-1.16-1.2 [ 17s] [45/204] installing readline-5.2-1.2 [ 17s] [46/204] installing sed-4.1.5-1.1 [ 18s] [47/204] installing smack-1.0+s14-1.2 [ 18s] [48/204] installing sqlite-3.7.13-1.2 [ 18s] [49/204] installing tar-1.17-1.2 [ 18s] [50/204] installing xz-libs-5.0.3-1.3 [ 18s] [51/204] installing zlib-1.2.5-1.10 [ 18s] [52/204] installing gmp-4.2.1-1.2 [ 18s] [53/204] installing libpcre-7.7-1.3 [ 18s] [54/204] installing ncurses-libs-5.7-1.2 [ 18s] [55/204] installing build-compare-2009.10.14-1.5 [ 18s] [56/204] installing qemu.x86_64-1.2-2.1 [ 20s] [57/204] installing capi-base-common-devel-0.1.7-1.1 [ 20s] [58/204] installing eglibc-headers-2.13-1.11 [ 21s] [59/204] installing fribidi-devel-0.19.6-1.1 [ 21s] [60/204] installing libcap-2.21-1.2 [ 21s] [61/204] installing pixman-devel-0.28.2-1.1 [ 21s] [62/204] installing unzip-6.0-1.7 [ 21s] [63/204] installing zlib-devel-1.2.5-1.10 [ 21s] [64/204] installing freetype-2.4.9-1.1 [ 21s] [65/204] installing grep-2.5.1a-1.1 [ 21s] [66/204] installing libacl-2.2.49-1.2 [ 21s] [67/204] installing libfile-5.04-1.2 [ 21s] [68/204] installing libpng-1.2.50-1.1 [ 22s] [69/204] installing libxcb-1.8.1-1.1 [ 22s] [70/204] installing lzo-minilzo-2.03-1.3 [ 22s] [71/204] installing make-3.82-1.2 [ 22s] [72/204] installing mpfr-3.0.0-1.2 [ 22s] [73/204] installing ncurses-5.7-1.2 [ 22s] [74/204] installing bzip2-1.0.5-1.2 [ 22s] [75/204] installing glib2-2.32.3-1.2 [ 22s] [76/204] installing libblkid-2.20.2-1.1 [ 23s] [77/204] installing libicu-51-1.2 [ 23s] [78/204] installing smack-utils-1.0+s14-1.2 [ 23s] [79/204] installing xz-5.0.3-1.3 [ 23s] [80/204] installing binutils-2.22-1.5 [ 23s] [81/204] installing elfutils-libs-0.152-1.9 [ 24s] [82/204] installing libcurl-7.28.1_26-1.1 [ 24s] [83/204] installing nss-3.12.9-1.13 [ 24s] [84/204] installing perl-5.12.1-1.4 [ 25s] [85/204] installing ncurses-base-5.7-1.2 [ 25s] [86/204] installing perl-HTML-Tagset-3.20-1.1 [ 25s] [87/204] installing perl-IO-Compress-Base-2.008-1.4 [ 25s] [88/204] installing perl-Module-Pluggable-3.60-1.4 [ 25s] [89/204] installing perl-Pod-Escapes-1.04-1.4 [ 25s] [90/204] installing perl-TimeDate-1.20-1.1 [ 25s] [91/204] installing eglibc-devel-2.13-1.11 [ 25s] [92/204] installing file-5.04-1.2 [ 25s] [93/204] installing lzo-devel-2.03-1.3 [ 25s] [94/204] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 25s] [95/204] installing perl-devel-5.12.1-1.4 [ 26s] [96/204] installing perl-libs-5.12.1-1.4 [ 26s] [97/204] installing coreutils-6.9-1.5 [ 26s] [98/204] installing freetype-devel-2.4.9-1.1 [ 26s] [99/204] installing libX11-1.5.0-1.1 [ 26s] [100/204] installing libdlog-0.4.1-1.1 [ 26s] [101/204] installing libmount-2.20.2-1.1 [ 26s] [102/204] installing mpc-0.9-1.2 [ 26s] [103/204] installing xz-lzma-compat-5.0.3-1.3 [ 26s] [104/204] installing elfutils-0.152-1.9 [ 27s] [105/204] installing harfbuzz-0.9.7-1.1 [ 27s] [106/204] installing nss-sysinit-3.12.9-1.13 [ 27s] [107/204] installing rpm-libs-4.9.1-1.1 [ 27s] [108/204] installing harfbuzz-devel-0.9.7-1.1 [ 27s] [109/204] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 27s] [110/204] installing perl-Pod-Simple-3.07-1.4 [ 27s] [111/204] installing perl-Test-Simple-0.80-1.4 [ 27s] [112/204] installing tizen-accelerator-1.0.1-1.1 [ 27s] [113/204] installing eina-1.7.1+svn.77445+build35-1.1 [ 28s] [114/204] installing giflib-4.1.6-1.1 [ 28s] [115/204] installing libXcomposite-0.4.4-1.1 [ 28s] [116/204] installing libXdamage-1.1.3-1.1 [ 28s] [117/204] installing libXext-1.3.1-1.1 [ 28s] [118/204] installing libXfixes-5.0-1.1 [ 28s] [119/204] installing libXrender-0.9.7-1.1 [ 28s] [120/204] installing libdlog-devel-0.4.1-1.1 [ 28s] [121/204] installing libidn-devel-1.15-1.1 [ 28s] [122/204] installing perl-IO-Compress-Zlib-2.008-1.4 [ 28s] [123/204] installing perl-Test-Harness-3.12-1.4 [ 28s] [124/204] installing gawk-3.1.5-1.4 [ 29s] [125/204] installing gzip-1.3.12-1.1 [ 29s] [126/204] installing build-2011.01.10a-1.1 [ 29s] [127/204] installing rpm-4.9.1-1.1 [ 29s] [128/204] installing cpp-4.6.4-1.15 [ 29s] [129/204] installing util-linux-2.20.2-1.1 [ 29s] [130/204] installing fontconfig-2.9.0-1.1 [ 32s] /opt/var/cache/fontconfig/*: No such file or directory [ 32s] [131/204] installing glib2-devel-2.32.3-1.2 [ 32s] [132/204] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 32s] [133/204] installing eglibc-x86-arm-2.13-1.2 [ 32s] [134/204] installing eina-devel-1.7.1+svn.77445+build35-1.1 [ 32s] [135/204] installing elfutils-libelf-x86-arm-0.152-1.1 [ 33s] [136/204] installing elfutils-libs-x86-arm-0.152-1.2 [ 33s] [137/204] installing fontconfig-devel-2.9.0-1.1 [ 33s] [138/204] installing gmp-x86-arm-4.2.1-1.1 [ 33s] [139/204] installing libacl-x86-arm-2.2.49-1.1 [ 33s] [140/204] installing libattr-x86-arm-2.4.44-1.1 [ 33s] [141/204] installing libcap-x86-arm-2.21-1.1 [ 33s] [142/204] installing libfile-x86-arm-5.04-1.2 [ 33s] [143/204] installing libgcc-x86-arm-4.6.4-1.1 [ 33s] [144/204] installing liblua-x86-arm-5.1.4-1.1 [ 33s] [145/204] installing mpc-x86-arm-0.9-1.1 [ 34s] [146/204] installing mpfr-x86-arm-3.0.0-1.1 [ 34s] [147/204] installing ncurses-libs-x86-arm-5.7-1.2 [ 34s] [148/204] installing nspr-x86-arm-4.9-1.2 [ 34s] [149/204] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 34s] [150/204] installing nss-x86-arm-3.12.9-1.2 [ 34s] [151/204] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 34s] [152/204] installing popt-x86-arm-1.16-1.1 [ 34s] [153/204] installing rpm-libs-x86-arm-4.9.1-1.2 [ 35s] [154/204] installing sqlite-x86-arm-3.7.13-1.1 [ 35s] [155/204] installing xz-libs-x86-arm-5.0.3-1.1 [ 35s] [156/204] installing zlib-x86-arm-1.2.5-1.1 [ 35s] [157/204] installing ecore-1.7.1+svn.77580+build125-7.1 [ 35s] [158/204] installing libXgesture-0.1.1-1.1 [ 35s] [159/204] installing libXi-1.6.1-1.1 [ 35s] [160/204] installing libXinerama-1.1.2-1.1 [ 35s] [161/204] installing libXtst-1.2.0-1.1 [ 35s] [162/204] installing libcurl-devel-7.28.1_26-1.1 [ 35s] [163/204] installing eet-1.7.1+svn.77495+build14-3.8 [ 35s] [164/204] installing libXcursor-1.1.13-1.1 [ 35s] [165/204] installing libXrandr-1.4.0-1.1 [ 36s] [166/204] installing gcc-4.6.4-1.15 [ 36s] [167/204] installing rpm-build-4.9.1-1.1 [ 36s] [168/204] installing perl-CPAN-1.9205-1.4 [ 36s] [169/204] installing bash-x86-arm-4.1-1.1 [ 36s] [170/204] installing ecore-imf-1.7.1+svn.77580+build125-7.1 [ 36s] [171/204] installing ecore-input-1.7.1+svn.77580+build125-7.1 [ 36s] [172/204] installing eet-devel-1.7.1+svn.77495+build14-3.8 [ 36s] [173/204] installing eet-tools-1.7.1+svn.77495+build14-3.8 [ 36s] [174/204] installing fdupes-x86-arm-1.40-1.1 [ 37s] [175/204] installing findutils-x86-arm-4.2.31-1.1 [ 37s] [176/204] installing gawk-x86-arm-3.1.5-1.2 [ 37s] [177/204] installing gzip-x86-arm-1.3.12-1.1 [ 37s] [178/204] installing make-x86-arm-3.82-1.1 [ 37s] [179/204] installing sed-x86-arm-4.1.5-1.1 [ 37s] [180/204] installing tar-x86-arm-1.17-1.2 [ 37s] [181/204] installing diffutils-x86-arm-3.0-1.1 [ 37s] [182/204] installing patch-x86-arm-2.6-1.1 [ 37s] [183/204] installing autoconf-2.68-1.1 [ 38s] [184/204] installing coreutils-x86-arm-6.9-1.1 [ 39s] [185/204] installing ecore-con-1.7.1+svn.77580+build125-7.1 [ 39s] [186/204] installing file-x86-arm-5.04-1.1 [ 40s] [187/204] installing elfutils-x86-arm-0.152-1.2 [ 40s] [188/204] installing gcc-c++-4.6.4-1.15 [ 40s] [189/204] installing evas-1.7.1+svn.77561+build187-10.1 [ 40s] [190/204] installing rpm-x86-arm-4.9.1-1.2 [ 40s] /bin/rpm.orig-arm already present - skipping. [ 40s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 40s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 40s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 40s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 40s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 40s] [191/204] installing rpm-build-x86-arm-4.9.1-1.2 [ 40s] [192/204] installing automake-1.11.1-1.1 [ 40s] [193/204] installing ecore-fb-1.7.1+svn.77580+build125-7.1 [ 40s] [194/204] installing ecore-file-1.7.1+svn.77580+build125-7.1 [ 40s] [195/204] installing ecore-imf-evas-1.7.1+svn.77580+build125-7.1 [ 40s] [196/204] installing ecore-ipc-1.7.1+svn.77580+build125-7.1 [ 40s] [197/204] installing ecore-input-evas-1.7.1+svn.77580+build125-7.1 [ 41s] [198/204] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 41s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 41s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 41s] [199/204] installing evas-devel-1.7.1+svn.77561+build187-10.1 [ 42s] [200/204] installing ecore-x-1.7.1+svn.77580+build125-7.1 [ 42s] [201/204] installing libtool-2.2.6b-1.2 [ 42s] [202/204] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 42s] [203/204] installing ecore-evas-1.7.1+svn.77580+build125-7.1 [ 42s] [204/204] installing ecore-devel-1.7.1+svn.77580+build125-7.1 [ 42s] removing nis flags from //etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 43s] /.build/build: line 2585: mount: command not found [ 43s] /.build/build: line 2586: mount: command not found [ 46s] build target is armv7l-tizen-linux [ 46s] ----------------------------------------------------------------- [ 46s] I have the following modifications for eio.spec: [ 46s] 5c5 [ 46s] < Release: 1 [ 46s] --- [ 46s] > Release: 1.1 [ 46s] ----------------------------------------------------------------- [ 46s] ----- building eio.spec (user abuild) [ 46s] ----------------------------------------------------------------- [ 46s] ----------------------------------------------------------------- [ 46s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/a86d6e81e2caa89c7374622e3b5e1893-eio' /home/abuild/rpmbuild/SOURCES/eio.spec [ 46s] Building target platforms: armv7l-tizen-linux [ 46s] Building for target armv7l-tizen-linux [ 46s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.QeSPGr [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + rm -rf eio-1.7.1+svn.77392+build04 [ 46s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/eio-1.7.1+svn.77392+build04.tar.gz [ 46s] + /bin/tar -xf - [ 46s] + STATUS=0 [ 46s] + '[' 0 -ne 0 ']' [ 46s] + cd eio-1.7.1+svn.77392+build04 [ 46s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 46s] + exit 0 [ 46s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qByhFo [ 46s] + umask 022 [ 46s] + cd /home/abuild/rpmbuild/BUILD [ 46s] + cd eio-1.7.1+svn.77392+build04 [ 46s] + LANG=C [ 46s] + export LANG [ 46s] + unset DISPLAY [ 46s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + LD_AS_NEEDED=1 [ 46s] + export LD_AS_NEEDED [ 46s] + export 'CFLAGS+= -fvisibility=hidden -fPIC -Wall' [ 46s] + CFLAGS+=' -fvisibility=hidden -fPIC -Wall' [ 46s] + export 'LDFLAGS+= -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 46s] + LDFLAGS+=' -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed' [ 46s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC -Wall' [ 46s] + export CFLAGS [ 46s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 46s] + export CXXFLAGS [ 46s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 46s] + export FFLAGS [ 46s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 46s] Running aclocal... [ 57s] sh: svnversion: command not found [ 62s] Running autoheader... [ 64s] sh: svnversion: command not found [ 69s] Running autoconf... [ 75s] Running libtoolize... [ 75s] Running automake... [ 79s] configure.ac:159: installing `./compile' [ 79s] configure.ac:42: installing `./config.guess' [ 79s] configure.ac:42: installing `./config.sub' [ 79s] configure.ac:36: installing `./install-sh' [ 79s] configure.ac:36: installing `./missing' [ 79s] doc/Makefile.am:32: wildcard $(srcdir: non-POSIX variable name [ 79s] doc/Makefile.am:32: (probably a GNU make extension) [ 80s] src/examples/Makefile.am: installing `./depcomp' [ 82s] cmp: config.cache-env: No such file or directory [ 82s] Cleaning configure cache... [ 83s] configure: creating cache config.cache [ 83s] checking for a BSD-compatible install... /usr/bin/install -c [ 84s] checking whether build environment is sane... yes [ 84s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 84s] checking for gawk... gawk [ 84s] checking whether make sets $(MAKE)... yes [ 84s] checking for style of include used by make... GNU [ 84s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 84s] checking for gcc... gcc [ 84s] checking whether the C compiler works... yes [ 84s] checking for C compiler default output file name... a.out [ 84s] checking for suffix of executables... [ 84s] checking whether we are cross compiling... no [ 84s] checking for suffix of object files... o [ 84s] checking whether we are using the GNU C compiler... yes [ 84s] checking whether gcc accepts -g... yes [ 84s] checking for gcc option to accept ISO C89... none needed [ 84s] checking dependency style of gcc... gcc3 [ 84s] checking how to run the C preprocessor... gcc -E [ 84s] checking for grep that handles long lines and -e... /bin/grep [ 84s] checking for egrep... /bin/grep -E [ 84s] checking for ANSI C header files... yes [ 84s] checking for sys/types.h... yes [ 84s] checking for sys/stat.h... yes [ 84s] checking for stdlib.h... yes [ 84s] checking for string.h... yes [ 84s] checking for memory.h... yes [ 84s] checking for strings.h... yes [ 84s] checking for inttypes.h... yes [ 84s] checking for stdint.h... yes [ 84s] checking for unistd.h... yes [ 84s] checking minix/config.h usability... no [ 85s] checking minix/config.h presence... no [ 85s] checking for minix/config.h... no [ 85s] checking whether it is safe to define __EXTENSIONS__... yes [ 85s] checking for special C compiler options needed for large files... no [ 85s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 85s] checking build system type... armv7l-unknown-linux-gnueabi [ 85s] checking host system type... armv7l-unknown-linux-gnueabi [ 85s] checking for a sed that does not truncate output... /bin/sed [ 85s] checking for fgrep... /bin/grep -F [ 85s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 85s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 85s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 85s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 85s] checking whether ln -s works... yes [ 85s] checking the maximum length of command line arguments... 1572864 [ 85s] checking whether the shell understands some XSI constructs... yes [ 85s] checking whether the shell understands "+="... yes [ 85s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 85s] checking for armv7l-unknown-linux-gnueabi-objdump... objdump [ 85s] checking how to recognize dependent libraries... pass_all [ 85s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 85s] checking for ar... ar [ 85s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 85s] checking for strip... strip [ 85s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 85s] checking for ranlib... ranlib [ 85s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 85s] checking for dlfcn.h... yes [ 85s] checking for objdir... .libs [ 85s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 85s] checking for gcc option to produce PIC... -fPIC -DPIC [ 85s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 85s] checking if gcc static flag -static works... no [ 85s] checking if gcc supports -c -o file.o... yes [ 85s] checking if gcc supports -c -o file.o... (cached) yes [ 85s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 85s] checking whether -lc should be explicitly linked in... no [ 85s] checking dynamic linker characteristics... GNU/Linux ld.so [ 85s] checking how to hardcode library paths into programs... immediate [ 85s] checking whether stripping libraries is possible... yes [ 85s] checking if libtool supports shared libraries... yes [ 85s] checking whether to build shared libraries... yes [ 85s] checking whether to build static libraries... yes [ 85s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 85s] checking whether we are using the GNU C compiler... (cached) yes [ 85s] checking whether gcc accepts -g... (cached) yes [ 85s] checking for gcc option to accept ISO C89... (cached) none needed [ 85s] checking dependency style of gcc... (cached) gcc3 [ 85s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 85s] checking for pkg-config... /usr/bin/pkg-config [ 85s] checking pkg-config is at least version 0.9.0... yes [ 85s] checking whether to build documentation... yes [ 85s] checking for doxygen... no [ 85s] WARNING: [ 85s] The doxygen program was not found in your execute path. [ 85s] You may have doxygen installed somewhere not covered by your path. [ 85s] [ 85s] If this is the case make sure you have the packages installed, AND [ 85s] that the doxygen program is in your execute path (see your [ 85s] shell manual page on setting the $PATH environment variable), OR [ 85s] alternatively, specify the program to use with --with-doxygen. [ 85s] configure: WARNING: no doxygen detected. Documentation will not be built [ 85s] checking for EIO... yes [ 85s] checking for dirent.h that defines DIR... yes [ 85s] checking for library containing opendir... none required [ 85s] checking whether time.h and sys/time.h may both be included... yes [ 85s] checking for unistd.h... (cached) yes [ 85s] checking libgen.h usability... yes [ 85s] checking libgen.h presence... yes [ 85s] checking for libgen.h... yes [ 85s] checking grp.h usability... yes [ 85s] checking grp.h presence... yes [ 85s] checking for grp.h... yes [ 85s] checking features.h usability... yes [ 85s] checking features.h presence... yes [ 85s] checking for features.h... yes [ 85s] checking pwd.h usability... yes [ 85s] checking pwd.h presence... yes [ 85s] checking for pwd.h... yes [ 85s] checking whether to build POSIX threads code... auto [ 85s] checking whether to build Windows threads code... no [ 85s] checking whether system support POSIX threads... yes [ 86s] checking for PATH_MAX in limits.h... yes [ 86s] checking whether byte ordering is bigendian... no [ 86s] checking for inline... inline [ 86s] checking for __attribute__... yes [ 86s] checking whether gcc and cc understand -c and -o together... yes [ 86s] checking for fchmod... yes [ 86s] checking for chown... yes [ 86s] checking for getpwnam... yes [ 86s] checking for getgrnam... yes [ 86s] checking for fcntl... yes [ 86s] checking whether to use splice for file copy... yes [ 86s] checking whether lstat is available... yes [ 86s] checking for extended attributes... yes [ 86s] checking whether inotify is to be used for filemonitoring... yes [ 86s] checking for inotify_init in -lc... yes [ 86s] checking whether Windows notification is to be used for filemonitoring... no [ 86s] checking whether examples are built... no [ 86s] checking whether examples are installed... no [ 86s] configure: updating cache config.cache [ 86s] configure: creating ./config.status [ 86s] config.status: creating eio.pc [ 86s] config.status: creating eio.spec [ 86s] config.status: creating Makefile [ 86s] config.status: creating doc/Makefile [ 86s] config.status: creating doc/eio.dox [ 86s] config.status: creating doc/Doxyfile [ 86s] config.status: creating src/Makefile [ 86s] config.status: creating src/lib/Makefile [ 86s] config.status: creating src/examples/Makefile [ 86s] config.status: creating config.h [ 86s] config.status: executing depfiles commands [ 87s] config.status: executing libtool commands [ 87s] [ 87s] [ 87s] ------------------------------------------------------------------------ [ 87s] eio 1.7.99.0 [ 87s] ------------------------------------------------------------------------ [ 87s] [ 87s] [ 87s] [ 87s] Configuration Options Summary: [ 87s] [ 87s] Thread Support.......: POSIX [ 87s] Inotify..............: yes [ 87s] Windows notification.: no [ 87s] [ 87s] Documentation........: no [ 87s] Examples...............: no [ 87s] Examples installed.....: no [ 87s] [ 87s] Compilation............: make (or gmake) [ 87s] CPPFLAGS.............: [ 87s] CFLAGS...............: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fvisibility=hidden -fPIC -Wall [ 87s] LDFLAGS..............: -fvisibility=hidden -Wl,--hash-style=both -Wl,--as-needed [ 87s] [ 87s] Installation...........: make install (as root if needed, with 'su' or 'sudo') [ 87s] prefix...............: /usr [ 87s] [ 87s] + make -j8 [ 87s] make all-recursive [ 87s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 87s] Making all in src [ 87s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 87s] Making all in lib [ 87s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 87s] CC eio_dir.lo [ 87s] CC eio_eet.lo [ 87s] CC eio_file.lo [ 87s] CC eio_main.lo [ 87s] CC eio_map.lo [ 87s] CC eio_monitor.lo [ 87s] CC eio_monitor_poll.lo [ 87s] CC eio_single.lo [ 87s] CC eio_xattr.lo [ 87s] CC eio_monitor_inotify.lo [ 87s] CCLD libeio.la [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 88s] Making all in examples [ 88s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[3]: Nothing to be done for `all'. [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[3]: Nothing to be done for `all-am'. [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] Making all in doc [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[2]: Nothing to be done for `all'. [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] + exit 0 [ 88s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EYKe7k [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd eio-1.7.1+svn.77392+build04 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm install [ 88s] Making install in src [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] Making install in lib [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 88s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 88s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib" [ 88s] /bin/sh ../../libtool --mode=install /usr/bin/install -c libeio.la '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib' [ 88s] libtool: install: /usr/bin/install -c .libs/libeio.so.1.7.99 /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.so.1.7.99 [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib && { ln -s -f libeio.so.1.7.99 libeio.so.1 || { rm -f libeio.so.1 && ln -s libeio.so.1.7.99 libeio.so.1; }; }) [ 88s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib && { ln -s -f libeio.so.1.7.99 libeio.so || { rm -f libeio.so && ln -s libeio.so.1.7.99 libeio.so; }; }) [ 88s] libtool: install: /usr/bin/install -c .libs/libeio.lai /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.la [ 88s] libtool: install: /usr/bin/install -c .libs/libeio.a /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.a [ 88s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.a [ 88s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.a [ 88s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 88s] test -z "/usr/include/eio-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/include/eio-1" [ 88s] /usr/bin/install -c -m 644 Eio.h eio_inline_helper.x '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/include/eio-1' [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/lib' [ 88s] Making install in examples [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[3]: Nothing to be done for `install-exec-am'. [ 88s] test -z "/usr/share/eio/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/share/eio/examples" [ 88s] test -z "/usr/share/eio/examples" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/share/eio/examples" [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src/examples' [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[3]: Nothing to be done for `install-exec-am'. [ 88s] make[3]: Nothing to be done for `install-data-am'. [ 88s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/src' [ 88s] Making install in doc [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[2]: Nothing to be done for `install-exec-am'. [ 88s] make[2]: Nothing to be done for `install-data-am'. [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/doc' [ 88s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] make[2]: Nothing to be done for `install-exec-am'. [ 88s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/pkgconfig" [ 88s] /usr/bin/install -c -m 644 eio.pc '/home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/pkgconfig' [ 88s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04' [ 88s] + rm -f /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/share/info/dir [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm -regex '.*\.la$' [ 88s] + xargs rm -f -- [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm -regex '.*\.a$' [ 88s] + xargs rm -f -- [ 88s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/share/license [ 88s] + cp /home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04/COPYING /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/share/license/eio [ 88s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/eio-1.7.1+svn.77392+build04 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm/usr/lib/libeio.so.1.7.99 [ 88s] symlinked /usr/lib/debug/usr/lib/libeio.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeio.so.debug [ 88s] symlinked /usr/lib/debug/usr/lib/libeio.so.1.7.99.debug to /usr/lib/debug/usr/lib/libeio.so.1.debug [ 88s] 396 blocks [ 88s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 88s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 88s] + /usr/lib/rpm/brp-python-hardlink [ 88s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] Processing files: eio-1.7.1+svn.77392+build04-1.1.armv7l [ 88s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIi8+Cgk8L3Jl [ 88s] cXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 88s] [ 88s] Provides: libeio.so.1 [ 88s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 88s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 88s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.5) libecore.so.1 libeet.so.1 libeina.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) [ 88s] Processing files: eio-devel-1.7.1+svn.77392+build04-1.1.armv7l [ 88s] Provides: pkgconfig(eio) = 1.7.99.0 [ 88s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 88s] Requires: /usr/bin/pkg-config libeio.so.1 pkgconfig(ecore) >= 1.6.99 pkgconfig(eet) >= 1.6.99 pkgconfig(eina) >= 1.6.99 [ 88s] Processing files: eio-debuginfo-1.7.1+svn.77392+build04-1.1.armv7l [ 88s] Processing files: eio-debugsource-1.7.1+svn.77392+build04-1.1.armv7l [ 88s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] Wrote: /home/abuild/rpmbuild/SRPMS/eio-1.7.1+svn.77392+build04-1.1.src.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eio-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eio-devel-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eio-debuginfo-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 88s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/eio-debugsource-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 88s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.O3taqc [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd eio-1.7.1+svn.77392+build04 [ 88s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/eio-1.7.1+svn.77392+build04-1.1.arm [ 88s] + exit 0 [ 88s] ... checking for files with abuild user/group [ 89s] ... creating baselibs [ 89s] ... saving built statistics [ 89s] /.build/build: line 3144: mount: command not found [ 89s] ERROR: no root disk device found, yet another new device name? [ 89s] ls: cannot access /sys/block/: No such file or directory [ 89s] /.build/build: line 3159: umount: command not found [ 89s] ... saving built packages [ 89s] /home/abuild/rpmbuild/RPMS/armv7l/eio-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 89s] /home/abuild/rpmbuild/RPMS/armv7l/eio-debuginfo-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 89s] /home/abuild/rpmbuild/RPMS/armv7l/eio-debugsource-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 89s] /home/abuild/rpmbuild/RPMS/armv7l/eio-devel-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 89s] /home/abuild/rpmbuild/SRPMS/eio-1.7.1+svn.77392+build04-1.1.src.rpm [ 89s] /home/abuild/rpmbuild/OTHER/_statistics [ 89s] [ 89s] w05 finished "build eio.spec" at Tue Feb 3 20:09:51 UTC 2015. [ 89s] [ 92s] [ 86.428454] SysRq : Power Off [ 93s] [ 86.544204] Power down. [ 93s] build: extracting built packages... [ 93s] eio-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 93s] eio-debuginfo-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 93s] eio-debugsource-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 93s] eio-devel-1.7.1+svn.77392+build04-1.1.armv7l.rpm [ 93s] eio-1.7.1+svn.77392+build04-1.1.src.rpm [ 93s] _statistics Retried build at Wed Feb 4 03:43:38 2015 returned same result, skipped Retried build at Thu Feb 5 21:38:32 2015 returned same result, skipped