[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w08 started "build _service:gbs:emuld.spec" at Tue Feb 3 20:12:17 UTC 2015. [ 0s] [ 0s] Building emuld for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '6559d390686d2fb2e55232febe467817' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:emuld.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:emuld.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:emuld.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus-libs -> dbus [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 8 [ 6s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4770/2392064 files, 244322/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: armv7l [ 7s] /.build/build: line 770: mount: command not found [ 7s] swapon on /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/_service:gbs:emuld.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:emuld.spec build rpmlint-Factory ... [ 8s] running rpm-x86-arm postinstall script [ 8s] running rpm-libs-x86-arm postinstall script [ 8s] running tizen-accelerator postinstall script [ 8s] running bash-x86-arm postinstall script [ 8s] initializing rpm db... [ 12s] [1/186] installing cross-armv7l-platformfile-0.0.1-1.1 [ 12s] [2/186] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 12s] [3/186] installing libX11-common-1.5.0-1.1 [ 12s] [4/186] installing tizen-release-2.2.0-1.1 [ 12s] [5/186] installing tzdata-2013h-1.1 [ 13s] [6/186] installing libgcc-4.6.4-1.15 [ 13s] [7/186] installing setup-0.1-1.1 [ 13s] [8/186] installing filesystem-0.1-1.1 [ 13s] warning: group lock does not exist - using root [ 13s] [9/186] installing eglibc-2.13-1.11 [ 13s] [10/186] installing libstdc++-4.6.4-1.15 [ 13s] [11/186] installing eglibc-common-2.13-1.11 [ 13s] [12/186] installing libstdc++-devel-4.6.4-1.15 [ 13s] [13/186] installing opengl-es-virtual-drv-0.1.6-1.4 [ 14s] [14/186] installing bash-4.1-1.1 [ 14s] [15/186] installing bzip2-libs-1.0.5-1.2 [ 14s] [16/186] installing capi-base-common-0.1.7-1.1 [ 14s] [17/186] installing cpio-2.8-1.1 [ 14s] [18/186] installing diffutils-3.0-1.1 [ 14s] [19/186] installing e2fsprogs-libs-1.41.9-1.2 [ 14s] [20/186] installing elfutils-libelf-0.152-1.9 [ 14s] [21/186] installing expat-2.0.1-1.2 [ 14s] [22/186] installing fdupes-1.40-1.1 [ 14s] [23/186] installing findutils-4.2.31-1.1 [ 14s] [24/186] installing fribidi-0.19.6-1.1 [ 14s] [25/186] installing gdbm-1.8.3-1.3 [ 14s] [26/186] installing libXau-1.0.7-1.1 [ 14s] [27/186] installing libattr-2.4.44-1.2 [ 15s] [28/186] installing libffi-3.0.9-1.1 [ 15s] [29/186] installing libgomp-4.6.4-1.15 [ 15s] [30/186] installing libjpeg-turbo-1.2.0-1.1 [ 15s] [31/186] installing liblua-5.1.4-1.2 [ 15s] [32/186] installing libuuid-2.20.2-1.1 [ 15s] [33/186] installing lzo-2.03-1.3 [ 15s] [34/186] installing m4-1.4.14-1.1 [ 15s] [35/186] installing net-tools-1.60-1.2 [ 15s] [36/186] installing nspr-4.9-1.10 [ 15s] [37/186] installing nss-softokn-freebl-3.12.9-1.13 [ 15s] [38/186] installing openssl-1.0.1k-1.6 [ 15s] [39/186] installing patch-2.6-1.1 [ 15s] [40/186] installing pixman-0.28.2-1.1 [ 16s] [41/186] installing pkg-config-0.25-1.2 [ 16s] [42/186] installing popt-1.16-1.2 [ 16s] [43/186] installing readline-5.2-1.2 [ 16s] [44/186] installing sed-4.1.5-1.1 [ 16s] [45/186] installing smack-1.0+s14-1.2 [ 16s] [46/186] installing sqlite-3.7.13-1.2 [ 16s] [47/186] installing tar-1.17-1.2 [ 16s] [48/186] installing xz-libs-5.0.3-1.3 [ 16s] [49/186] installing zlib-1.2.5-1.10 [ 16s] [50/186] installing gmp-4.2.1-1.2 [ 16s] [51/186] installing libpcre-7.7-1.3 [ 16s] [52/186] installing ncurses-libs-5.7-1.2 [ 16s] [53/186] installing build-compare-2009.10.14-1.5 [ 16s] [54/186] installing qemu.x86_64-1.2-2.1 [ 18s] [55/186] installing vconf-internal-keys-devel-0.0.150-1.1 [ 18s] [56/186] installing capi-base-common-devel-0.1.7-1.1 [ 18s] [57/186] installing eglibc-headers-2.13-1.11 [ 18s] [58/186] installing libcap-2.21-1.2 [ 18s] [59/186] installing unzip-6.0-1.7 [ 18s] [60/186] installing zlib-devel-1.2.5-1.10 [ 18s] [61/186] installing freetype-2.4.9-1.1 [ 18s] [62/186] installing grep-2.5.1a-1.1 [ 19s] [63/186] installing libacl-2.2.49-1.2 [ 19s] [64/186] installing libfile-5.04-1.2 [ 19s] [65/186] installing libpng-1.2.50-1.1 [ 19s] [66/186] installing libxcb-1.8.1-1.1 [ 19s] [67/186] installing libxml2-2.7.8-1.2 [ 19s] [68/186] installing lzo-minilzo-2.03-1.3 [ 19s] [69/186] installing make-3.82-1.2 [ 19s] [70/186] installing mpfr-3.0.0-1.2 [ 19s] [71/186] installing ncurses-5.7-1.2 [ 19s] [72/186] installing systemd-libs-210-5.4 [ 19s] [73/186] installing bzip2-1.0.5-1.2 [ 19s] [74/186] installing glib2-2.32.3-1.2 [ 20s] [75/186] installing kmod-libs-15-1.1 [ 20s] [76/186] installing libblkid-2.20.2-1.1 [ 20s] [77/186] installing libicu-51-1.2 [ 20s] [78/186] installing smack-utils-1.0+s14-1.2 [ 20s] [79/186] installing xz-5.0.3-1.3 [ 20s] [80/186] installing binutils-2.22-1.5 [ 20s] [81/186] installing elfutils-libs-0.152-1.9 [ 20s] [82/186] installing nss-3.12.9-1.13 [ 21s] [83/186] installing perl-5.12.1-1.4 [ 21s] [84/186] installing ncurses-base-5.7-1.2 [ 21s] [85/186] installing perl-HTML-Tagset-3.20-1.1 [ 22s] [86/186] installing perl-IO-Compress-Base-2.008-1.4 [ 22s] [87/186] installing perl-Module-Pluggable-3.60-1.4 [ 22s] [88/186] installing perl-Pod-Escapes-1.04-1.4 [ 22s] [89/186] installing perl-TimeDate-1.20-1.1 [ 22s] [90/186] installing eglibc-devel-2.13-1.11 [ 22s] [91/186] installing file-5.04-1.2 [ 22s] [92/186] installing lzo-devel-2.03-1.3 [ 22s] [93/186] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 22s] [94/186] installing perl-devel-5.12.1-1.4 [ 22s] [95/186] installing perl-libs-5.12.1-1.4 [ 22s] [96/186] installing coreutils-6.9-1.5 [ 22s] [97/186] installing libX11-1.5.0-1.1 [ 22s] [98/186] installing libdlog-0.4.1-1.1 [ 23s] [99/186] installing libmount-2.20.2-1.1 [ 23s] [100/186] installing mpc-0.9-1.2 [ 23s] [101/186] installing xz-lzma-compat-5.0.3-1.3 [ 23s] [102/186] installing elfutils-0.152-1.9 [ 23s] [103/186] installing harfbuzz-0.9.7-1.1 [ 23s] [104/186] installing nss-sysinit-3.12.9-1.13 [ 23s] [105/186] installing libarchive-2.8.3-1.1 [ 23s] [106/186] installing rpm-libs-4.9.1-1.1 [ 23s] [107/186] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 23s] [108/186] installing perl-Pod-Simple-3.07-1.4 [ 23s] [109/186] installing perl-Test-Simple-0.80-1.4 [ 23s] [110/186] installing tizen-accelerator-1.0.1-1.1 [ 24s] [111/186] installing eina-1.7.1+svn.77445+build35-1.1 [ 24s] [112/186] installing giflib-4.1.6-1.1 [ 24s] [113/186] installing libXext-1.3.1-1.1 [ 24s] [114/186] installing libXrender-0.9.7-1.1 [ 24s] [115/186] installing libdlog-devel-0.4.1-1.1 [ 24s] [116/186] installing perl-IO-Compress-Zlib-2.008-1.4 [ 24s] [117/186] installing perl-Test-Harness-3.12-1.4 [ 24s] [118/186] installing gawk-3.1.5-1.4 [ 24s] [119/186] installing gzip-1.3.12-1.1 [ 24s] [120/186] installing build-2011.01.10a-1.1 [ 24s] [121/186] installing rpm-4.9.1-1.1 [ 25s] [122/186] installing cpp-4.6.4-1.15 [ 25s] [123/186] installing dbus-1.6.4-1.1 [ 25s] [124/186] installing util-linux-2.20.2-1.1 [ 25s] [125/186] installing cmake-2.8.5-1.1 [ 25s] [126/186] installing fontconfig-2.9.0-1.1 [ 28s] /opt/var/cache/fontconfig/*: No such file or directory [ 28s] [127/186] installing glib2-devel-2.32.3-1.2 [ 28s] [128/186] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 28s] [129/186] installing dbus-libs-1.6.4-1.1 [ 28s] [130/186] installing eglibc-x86-arm-2.13-1.2 [ 28s] [131/186] installing elfutils-libelf-x86-arm-0.152-1.1 [ 28s] [132/186] installing elfutils-libs-x86-arm-0.152-1.2 [ 29s] [133/186] installing gmp-x86-arm-4.2.1-1.1 [ 29s] [134/186] installing libacl-x86-arm-2.2.49-1.1 [ 29s] [135/186] installing libattr-x86-arm-2.4.44-1.1 [ 29s] [136/186] installing libcap-x86-arm-2.21-1.1 [ 29s] [137/186] installing libfile-x86-arm-5.04-1.2 [ 29s] [138/186] installing libgcc-x86-arm-4.6.4-1.1 [ 29s] [139/186] installing liblua-x86-arm-5.1.4-1.1 [ 29s] [140/186] installing mpc-x86-arm-0.9-1.1 [ 29s] [141/186] installing mpfr-x86-arm-3.0.0-1.1 [ 30s] [142/186] installing ncurses-libs-x86-arm-5.7-1.2 [ 30s] [143/186] installing nspr-x86-arm-4.9-1.2 [ 30s] [144/186] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 30s] [145/186] installing nss-x86-arm-3.12.9-1.2 [ 30s] [146/186] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 30s] [147/186] installing popt-x86-arm-1.16-1.1 [ 30s] [148/186] installing rpm-libs-x86-arm-4.9.1-1.2 [ 30s] [149/186] installing sqlite-x86-arm-3.7.13-1.1 [ 30s] [150/186] installing xz-libs-x86-arm-5.0.3-1.1 [ 30s] [151/186] installing zlib-x86-arm-1.2.5-1.1 [ 31s] [152/186] installing ecore-1.7.1+svn.77580+build125-7.1 [ 31s] [153/186] installing eet-1.7.1+svn.77495+build14-3.8 [ 31s] [154/186] installing systemd-210-5.4 [ 31s] [155/186] installing gcc-4.6.4-1.15 [ 31s] [156/186] installing rpm-build-4.9.1-1.1 [ 32s] [157/186] installing perl-CPAN-1.9205-1.4 [ 32s] [158/186] installing bash-x86-arm-4.1-1.1 [ 32s] [159/186] installing dbus-glib-0.100-1.1 [ 32s] [160/186] installing fdupes-x86-arm-1.40-1.1 [ 32s] [161/186] installing findutils-x86-arm-4.2.31-1.1 [ 32s] [162/186] installing gawk-x86-arm-3.1.5-1.2 [ 32s] [163/186] installing gzip-x86-arm-1.3.12-1.1 [ 32s] [164/186] installing make-x86-arm-3.82-1.1 [ 32s] [165/186] installing sed-x86-arm-4.1.5-1.1 [ 32s] [166/186] installing tar-x86-arm-1.17-1.2 [ 32s] [167/186] installing diffutils-x86-arm-3.0-1.1 [ 33s] [168/186] installing patch-x86-arm-2.6-1.1 [ 33s] [169/186] installing autoconf-2.68-1.1 [ 33s] [170/186] installing coreutils-x86-arm-6.9-1.1 [ 35s] [171/186] installing file-x86-arm-5.04-1.1 [ 35s] [172/186] installing vconf-0.2.83-1.1 [ 35s] Failed to get D-Bus connection: Unknown error 4294967295 [ 35s] warning: %post(vconf-0.2.83-1.1.armv7l) scriptlet failed, exit status 1 [ 35s] [173/186] installing elfutils-x86-arm-0.152-1.2 [ 35s] [174/186] installing gcc-c++-4.6.4-1.15 [ 35s] [175/186] installing evas-1.7.1+svn.77561+build187-10.1 [ 35s] [176/186] installing rpm-x86-arm-4.9.1-1.2 [ 35s] /bin/rpm.orig-arm already present - skipping. [ 35s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 35s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 35s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 35s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 35s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 35s] [177/186] installing rpm-build-x86-arm-4.9.1-1.2 [ 35s] [178/186] installing vconf-keys-devel-0.2.83-1.1 [ 35s] [179/186] installing automake-1.11.1-1.1 [ 35s] [180/186] installing edbus-1.6.0+svn.76526slp2+build10-1.1 [ 36s] [181/186] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 36s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 36s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 36s] [182/186] installing libtool-2.2.6b-1.2 [ 37s] [183/186] installing vconf-devel-0.2.83-1.1 [ 37s] [184/186] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 37s] [185/186] installing libdeviced-1.0.0-1.1 [ 37s] [186/186] installing libdeviced-devel-1.0.0-1.1 [ 37s] removing nis flags from //etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 37s] /.build/build: line 2585: mount: command not found [ 37s] /.build/build: line 2586: mount: command not found [ 40s] build target is armv7l-tizen-linux [ 40s] ----------------------------------------------------------------- [ 40s] I have the following modifications for emuld.spec: [ 40s] 4c4 [ 40s] < Release: 0 [ 40s] --- [ 40s] > Release: 1.1 [ 40s] ----------------------------------------------------------------- [ 40s] ----- building emuld.spec (user abuild) [ 40s] ----------------------------------------------------------------- [ 40s] ----------------------------------------------------------------- [ 40s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/6559d390686d2fb2e55232febe467817-emuld' /home/abuild/rpmbuild/SOURCES/emuld.spec [ 40s] Building target platforms: armv7l-tizen-linux [ 40s] Building for target armv7l-tizen-linux [ 40s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OUpx9P [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + rm -rf emuld-0.8.4 [ 40s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/emuld-0.8.4.tar.gz [ 40s] + /bin/tar -xf - [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd emuld-0.8.4 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + export 'CFLAGS+= -DMOBILE' [ 40s] + CFLAGS+=' -DMOBILE' [ 40s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr [ 41s] -- The CXX compiler identification is GNU [ 41s] -- Check for working CXX compiler: /usr/bin/c++ [ 41s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 41s] -- Detecting CXX compiler ABI info [ 41s] -- Detecting CXX compiler ABI info - done [ 42s] -- checking for modules 'vconf;deviced;dlog' [ 42s] -- found vconf, version 0.2.45 [ 42s] -- found deviced, version 0.1.0 [ 42s] -- found dlog, version 1.0 [ 42s] -- Configuring done [ 42s] -- Generating done [ 42s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/emuld-0.8.4 [ 42s] + exit 0 [ 42s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.UmhMNF [ 42s] + umask 022 [ 42s] + cd /home/abuild/rpmbuild/BUILD [ 42s] + cd emuld-0.8.4 [ 42s] + LANG=C [ 42s] + export LANG [ 42s] + unset DISPLAY [ 42s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 42s] + export CFLAGS [ 42s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 42s] + export CXXFLAGS [ 42s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 42s] + export FFLAGS [ 42s] + LD_AS_NEEDED=1 [ 42s] + export LD_AS_NEEDED [ 42s] + make [ 43s] Scanning dependencies of target emuld [ 43s] [ 14%] Building CXX object CMakeFiles/emuld.dir/src/emuld.cpp.o [ 43s] [ 28%] Building CXX object CMakeFiles/emuld.dir/src/evdi.cpp.o [ 43s] [ 42%] Building CXX object CMakeFiles/emuld.dir/src/client.cpp.o [ 43s] [ 57%] Building CXX object CMakeFiles/emuld.dir/src/common.cpp.o [ 43s] [ 71%] Building CXX object CMakeFiles/emuld.dir/src/mobile.cpp.o [ 44s] [ 85%] Building CXX object CMakeFiles/emuld.dir/src/mobile_dev.cpp.o [ 44s] [100%] Building CXX object CMakeFiles/emuld.dir/src/common_dev.cpp.o [ 44s] Linking CXX executable emuld [ 44s] [100%] Built target emuld [ 44s] + exit 0 [ 44s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.NAgVQA [ 44s] + umask 022 [ 44s] + cd /home/abuild/rpmbuild/BUILD [ 44s] + cd emuld-0.8.4 [ 44s] + LANG=C [ 44s] + export LANG [ 44s] + unset DISPLAY [ 44s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 44s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 44s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 44s] + '[' '!' -d /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/lib/systemd/system/emulator.target.wants ']' [ 44s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/lib/systemd/system/emulator.target.wants [ 44s] + cp emuld.service /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/lib/systemd/system/. [ 44s] + ln -s ../emuld.service /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/lib/systemd/system/emulator.target.wants/emuld.service [ 44s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/share/license [ 44s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/share/license/emuld [ 44s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm install [ 45s] [100%] Built target emuld [ 45s] Install the project... [ 45s] -- Install configuration: "" [ 45s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/bin/emuld [ 45s] + rm -f /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/share/info/dir [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm -regex '.*\.la$' [ 45s] + xargs rm -f -- [ 45s] + find /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm -regex '.*\.a$' [ 45s] + xargs rm -f -- [ 45s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/emuld-0.8.4 [ 45s] WARNING: /usr/bin/emuld has no debug info! [ 45s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm/usr/bin/emuld [ 45s] + /usr/lib/rpm/check-buildroot [ 45s] + /usr/lib/rpm//brp-compress [ 45s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 45s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 45s] + /usr/lib/rpm/brp-python-hardlink [ 45s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 45s] Processing files: emuld-0.8.4-1.1.armv7l [ 45s] Aptk: PG1hbmlmZXN0PgoJPGRlZmluZT4KCQk8ZG9tYWluIG5hbWU9ImVtdWxkIi8+CgkJ [ 45s] PHJlcXVlc3Q+CgkJCTxzbWFjayByZXF1ZXN0PSJkZXZpY2VkOjpkaXNwbGF5IiB0 [ 45s] eXBlPSJydyIgLz4KCQk8L3JlcXVlc3Q+Cgk8L2RlZmluZT4KCTxyZXF1ZXN0PgoJ [ 45s] CTxkb21haW4gbmFtZT0iZW11bGQiIC8+Cgk8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+ [ 45s] Cg== [ 45s] [ 45s] Requires(interp): /bin/sh [ 45s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 45s] Requires(post): /bin/sh [ 45s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libdeviced.so.0.1.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libm.so.6 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libvconf.so.0 [ 45s] Processing files: emuld-debuginfo-0.8.4-1.1.armv7l [ 45s] Processing files: emuld-debugsource-0.8.4-1.1.armv7l [ 45s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 45s] Wrote: /home/abuild/rpmbuild/SRPMS/emuld-0.8.4-1.1.src.rpm [ 45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/emuld-0.8.4-1.1.armv7l.rpm [ 45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/emuld-debuginfo-0.8.4-1.1.armv7l.rpm [ 45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/emuld-debugsource-0.8.4-1.1.armv7l.rpm [ 45s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.k6oj0m [ 45s] + umask 022 [ 45s] + cd /home/abuild/rpmbuild/BUILD [ 45s] + cd emuld-0.8.4 [ 45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/emuld-0.8.4-1.1.arm [ 45s] + make clean [ 45s] + rm -rf CMakeCache.txt [ 45s] + rm -rf CMakeFiles [ 45s] + rm -rf cmake_install.cmake [ 45s] + rm -rf Makefile [ 45s] + rm -rf install_manifest.txt [ 45s] + exit 0 [ 45s] ... checking for files with abuild user/group [ 45s] ... creating baselibs [ 46s] ... saving built statistics [ 46s] /.build/build: line 3144: mount: command not found [ 46s] ERROR: no root disk device found, yet another new device name? [ 46s] ls: cannot access /sys/block/: No such file or directory [ 46s] /.build/build: line 3159: umount: command not found [ 46s] ... saving built packages [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/emuld-0.8.4-1.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/emuld-debuginfo-0.8.4-1.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/RPMS/armv7l/emuld-debugsource-0.8.4-1.1.armv7l.rpm [ 46s] /home/abuild/rpmbuild/SRPMS/emuld-0.8.4-1.1.src.rpm [ 46s] /home/abuild/rpmbuild/OTHER/_statistics [ 46s] [ 46s] w08 finished "build emuld.spec" at Tue Feb 3 20:13:03 UTC 2015. [ 46s] [ 47s] /.build/build: line 368: 237 Killed background_monitor_process [ 49s] [ 44.082851] SysRq : Power Off [ 50s] [ 44.500223] Power down. [ 50s] build: extracting built packages... [ 50s] emuld-0.8.4-1.1.armv7l.rpm [ 50s] emuld-debuginfo-0.8.4-1.1.armv7l.rpm [ 50s] emuld-debugsource-0.8.4-1.1.armv7l.rpm [ 50s] emuld-0.8.4-1.1.src.rpm [ 50s] _statistics Retried build at Wed Feb 4 03:51:15 2015 returned same result, skipped Retried build at Wed Feb 4 04:28:59 2015 returned same result, skipped Retried build at Thu Feb 5 21:49:15 2015 returned same result, skipped