[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:intltool.spec" at Tue Feb 3 09:22:40 UTC 2015. [ 0s] [ 0s] Building intltool for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '98922d677b288c1744902a34c3b26622' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:intltool.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:intltool.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:intltool.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 15s] booting kvm ... [ 15s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 6 [ 17s] [ 0.000000] tsc: Fast TSC calibration failed [ 18s] doing fast boot [ 18s] Creating device nodes with udev [ 31s] Waiting for device /dev/vda to appear: ok [ 31s] fsck from util-linux 2.21.2 [ 31s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 31s] /dev/vda: clean, 4701/2392064 files, 238813/9568256 blocks [ 31s] fsck succeeded. Mounting root device read-write. [ 31s] Mounting root /dev/vda [ 31s] mount -o rw -t ext4 /dev/vda /root [ 35s] replacing /etc/mtab with symlink to /proc/self/mounts [ 37s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 50s] 2nd stage started in virtual machine [ 50s] machine type: armv7l [ 50s] switching personality to 8... [ 51s] 2nd stage started in virtual machine [ 51s] machine type: armv7l [ 51s] /.build/build: line 770: mount: command not found [ 51s] swapon on /dev/vdb [ 51s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 51s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 53s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 55s] logging output to //.build.log... [ 56s] processing specfile /.build-srcdir/_service:gbs:intltool.spec ... [ 57s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:intltool.spec build rpmlint-Factory ... [ 81s] running rpm-x86-arm postinstall script [ 82s] running rpm-libs-x86-arm postinstall script [ 83s] running tizen-accelerator postinstall script [ 87s] running bash-x86-arm postinstall script [ 87s] initializing rpm db... [ 101s] [1/147] installing cross-armv7l-platformfile-0.0.1-1.1 [ 102s] [2/147] installing kernel-headers-linux-3.0-3.0.101-14.39 [ 106s] [3/147] installing tizen-release-2.2.0-1.1 [ 108s] [4/147] installing tzdata-2013h-1.79 [ 113s] [5/147] installing libgcc-4.6.4-1.4 [ 118s] [6/147] installing setup-0.1-1.1 [ 121s] [7/147] installing filesystem-0.1-1.1 [ 126s] warning: group lock does not exist - using root [ 127s] [8/147] installing eglibc-2.13-1.1 [ 132s] [9/147] installing libstdc++-4.6.4-1.4 [ 134s] [10/147] installing eglibc-common-2.13-1.1 [ 144s] [11/147] installing libstdc++-devel-4.6.4-1.4 [ 144s] [12/147] installing bash-4.1-1.31 [ 145s] [13/147] installing bzip2-libs-1.0.5-1.1 [ 146s] [14/147] installing cpio-2.8-1.74 [ 146s] [15/147] installing diffutils-3.0-1.28 [ 147s] [16/147] installing e2fsprogs-libs-1.41.9-1.42 [ 148s] [17/147] installing elfutils-libelf-0.152-1.1 [ 148s] [18/147] installing expat-2.0.1-1.1 [ 148s] [19/147] installing fdupes-1.40-1.34 [ 148s] [20/147] installing findutils-4.2.31-2.78 [ 149s] [21/147] installing gdbm-1.8.3-1.1 [ 149s] [22/147] installing libattr-2.4.44-1.1 [ 150s] [23/147] installing libgomp-4.6.4-1.4 [ 150s] [24/147] installing liblua-5.1.4-1.1 [ 150s] [25/147] installing libuuid-2.20.2-1.55 [ 150s] [26/147] installing lzo-2.03-1.1 [ 151s] [27/147] installing m4-1.4.14-1.31 [ 151s] [28/147] installing net-tools-1.60-2.70 [ 152s] [29/147] installing nspr-4.9-1.1 [ 152s] [30/147] installing nss-softokn-freebl-3.12.9-1.2 [ 153s] [31/147] installing patch-2.6-1.80 [ 153s] [32/147] installing pkg-config-0.25-1.1 [ 154s] [33/147] installing popt-1.16-1.1 [ 154s] [34/147] installing readline-5.2-1.1 [ 154s] [35/147] installing sed-4.1.5-1.24 [ 155s] [36/147] installing sqlite-3.7.13-1.1 [ 156s] [37/147] installing tar-1.17-1.1 [ 157s] [38/147] installing xz-libs-5.0.3-1.1 [ 159s] [39/147] installing zlib-1.2.5-1.1 [ 159s] [40/147] installing gmp-4.2.1-1.1 [ 159s] [41/147] installing libpcre-7.7-1.1 [ 160s] [42/147] installing ncurses-libs-5.7-1.1 [ 160s] [43/147] installing build-compare-2009.10.14-1.1 [ 160s] [44/147] installing qemu.x86_64-1.2-2.1 [ 167s] [45/147] installing eglibc-headers-2.13-1.1 [ 167s] [46/147] installing libcap-2.21-1.1 [ 169s] [47/147] installing unzip-6.0-1.1 [ 170s] [48/147] installing zlib-devel-1.2.5-1.1 [ 170s] [49/147] installing grep-2.5.1a-1.26 [ 171s] [50/147] installing libacl-2.2.49-1.1 [ 172s] [51/147] installing libfile-5.04-1.1 [ 173s] [52/147] installing lzo-minilzo-2.03-1.1 [ 173s] [53/147] installing make-3.82-1.1 [ 176s] [54/147] installing mpfr-3.0.0-1.1 [ 177s] [55/147] installing ncurses-5.7-1.1 [ 177s] [56/147] installing bzip2-1.0.5-1.1 [ 178s] [57/147] installing gettext-runtime-0.18.1.1-1.1 [ 178s] [58/147] installing libblkid-2.20.2-1.55 [ 178s] [59/147] installing xz-5.0.3-1.1 [ 179s] [60/147] installing binutils-2.22-1.1 [ 180s] [61/147] installing elfutils-libs-0.152-1.1 [ 181s] [62/147] installing nss-3.12.9-1.2 [ 183s] [63/147] installing perl-5.12.1-1.1 [ 206s] [64/147] installing ncurses-base-5.7-1.1 [ 206s] [65/147] installing perl-HTML-Tagset-3.20-1.1 [ 206s] [66/147] installing perl-IO-Compress-Base-2.008-1.1 [ 206s] [67/147] installing perl-Module-Pluggable-3.60-1.1 [ 207s] [68/147] installing perl-Pod-Escapes-1.04-1.1 [ 207s] [69/147] installing perl-TimeDate-1.20-1.1 [ 207s] [70/147] installing perl-URI-1.54-1.1 [ 207s] [71/147] installing eglibc-devel-2.13-1.1 [ 209s] [72/147] installing file-5.04-1.1 [ 209s] [73/147] installing lzo-devel-2.03-1.1 [ 210s] [74/147] installing perl-Compress-Raw-Zlib-2.008-1.1 [ 211s] [75/147] installing perl-devel-5.12.1-1.1 [ 211s] [76/147] installing perl-libs-5.12.1-1.1 [ 212s] [77/147] installing coreutils-6.9-1.1 [ 213s] [78/147] installing gettext-tools-0.18.1.1-1.1 [ 215s] [79/147] installing libmount-2.20.2-1.55 [ 216s] [80/147] installing mpc-0.9-1.1 [ 216s] [81/147] installing xz-lzma-compat-5.0.3-1.1 [ 217s] [82/147] installing elfutils-0.152-1.1 [ 217s] [83/147] installing nss-sysinit-3.12.9-1.2 [ 218s] [84/147] installing rpm-libs-4.9.1-1.28 [ 219s] [85/147] installing perl-ExtUtils-ParseXS-2.18-1.1 [ 219s] [86/147] installing perl-Pod-Simple-3.07-1.1 [ 220s] [87/147] installing perl-Test-Simple-0.80-1.1 [ 220s] [88/147] installing tizen-accelerator-1.0.1-1.1 [ 221s] [89/147] installing perl-IO-Compress-Zlib-2.008-1.1 [ 221s] [90/147] installing perl-Test-Harness-3.12-1.1 [ 222s] [91/147] installing gawk-3.1.5-1.1 [ 222s] [92/147] installing gzip-1.3.12-1.28 [ 222s] [93/147] installing perl-HTML-Parser-3.65-1.61 [ 223s] [94/147] installing build-2011.01.10a-1.1 [ 224s] [95/147] installing rpm-4.9.1-1.28 [ 225s] [96/147] installing cpp-4.6.4-1.4 [ 226s] [97/147] installing util-linux-2.20.2-1.55 [ 228s] [98/147] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 228s] [99/147] installing eglibc-x86-arm-2.13-1.1 [ 230s] [100/147] installing elfutils-libelf-x86-arm-0.152-1.1 [ 231s] [101/147] installing elfutils-libs-x86-arm-0.152-1.1 [ 231s] [102/147] installing gmp-x86-arm-4.2.1-1.1 [ 231s] [103/147] installing libacl-x86-arm-2.2.49-1.1 [ 232s] [104/147] installing libattr-x86-arm-2.4.44-1.1 [ 232s] [105/147] installing libcap-x86-arm-2.21-1.1 [ 232s] [106/147] installing libfile-x86-arm-5.04-1.1 [ 232s] [107/147] installing libgcc-x86-arm-4.6.4-1.1 [ 233s] [108/147] installing liblua-x86-arm-5.1.4-1.1 [ 233s] [109/147] installing mpc-x86-arm-0.9-1.1 [ 233s] [110/147] installing mpfr-x86-arm-3.0.0-1.1 [ 233s] [111/147] installing ncurses-libs-x86-arm-5.7-1.1 [ 233s] [112/147] installing nspr-x86-arm-4.9-1.1 [ 234s] [113/147] installing nss-softokn-freebl-x86-arm-3.12.9-1.1 [ 234s] [114/147] installing nss-x86-arm-3.12.9-1.1 [ 234s] [115/147] installing perl-ExtUtils-MakeMaker-6.36-1.1 [ 234s] [116/147] installing popt-x86-arm-1.16-1.1 [ 234s] [117/147] installing rpm-libs-x86-arm-4.9.1-1.1 [ 234s] [118/147] installing sqlite-x86-arm-3.7.13-1.1 [ 235s] [119/147] installing xz-libs-x86-arm-5.0.3-1.1 [ 235s] [120/147] installing zlib-x86-arm-1.2.5-1.1 [ 235s] [121/147] installing perl-Compress-Zlib-2.008-1.1 [ 235s] [122/147] installing gcc-4.6.4-1.4 [ 235s] [123/147] installing rpm-build-4.9.1-1.28 [ 236s] [124/147] installing perl-CPAN-1.9205-1.1 [ 236s] [125/147] installing bash-x86-arm-4.1-1.1 [ 236s] [126/147] installing fdupes-x86-arm-1.40-1.1 [ 236s] [127/147] installing findutils-x86-arm-4.2.31-1.1 [ 236s] [128/147] installing gawk-x86-arm-3.1.5-1.1 [ 236s] [129/147] installing gzip-x86-arm-1.3.12-1.1 [ 237s] [130/147] installing make-x86-arm-3.82-1.1 [ 237s] [131/147] installing perl-libwww-perl-5.836-1.1 [ 237s] [132/147] installing sed-x86-arm-4.1.5-1.1 [ 237s] [133/147] installing tar-x86-arm-1.17-1.1 [ 237s] [134/147] installing diffutils-x86-arm-3.0-1.1 [ 238s] [135/147] installing patch-x86-arm-2.6-1.1 [ 238s] [136/147] installing autoconf-2.68-1.1 [ 238s] [137/147] installing coreutils-x86-arm-6.9-1.1 [ 240s] [138/147] installing file-x86-arm-5.04-1.1 [ 240s] [139/147] installing elfutils-x86-arm-0.152-1.1 [ 240s] [140/147] installing gcc-c++-4.6.4-1.4 [ 241s] [141/147] installing rpm-x86-arm-4.9.1-1.1 [ 241s] /bin/rpm.orig-arm already present - skipping. [ 241s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 241s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 241s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 241s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 241s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 241s] [142/147] installing rpm-build-x86-arm-4.9.1-1.1 [ 242s] [143/147] installing automake-1.11.1-1.1 [ 242s] [144/147] installing perl-XML-Parser-2.36-1.57 [ 242s] [145/147] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1 [ 245s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 245s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 245s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/cc1': No such file or directory [ 245s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/cc1plus': No such file or directory [ 245s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/collect2': No such file or directory [ 245s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/lto-wrapper': No such file or directory [ 245s] cp: cannot stat `/emul/ia32-linux/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/lto1': No such file or directory [ 245s] warning: %post(cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.1.armv7l) scriptlet failed, exit status 1 [ 245s] [146/147] installing libtool-2.2.6b-1.1 [ 245s] [147/147] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.3 [ 247s] removing nis flags from //etc/nsswitch.conf... [ 247s] now finalizing build dir... [ 247s] /.build/build: line 2585: mount: command not found [ 247s] /.build/build: line 2586: mount: command not found [ 260s] build target is armv7l-tizen-linux [ 260s] ----------------------------------------------------------------- [ 260s] I have the following modifications for intltool.spec: [ 260s] 10c10 [ 260s] < Release: 1 [ 260s] --- [ 260s] > Release: 1.1 [ 260s] 61a62 [ 260s] > %changelog [ 260s] ----------------------------------------------------------------- [ 260s] ----- building intltool.spec (user abuild) [ 260s] ----------------------------------------------------------------- [ 260s] ----------------------------------------------------------------- [ 260s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/98922d677b288c1744902a34c3b26622-intltool' /home/abuild/rpmbuild/SOURCES/intltool.spec [ 260s] Building target platforms: armv7l-tizen-linux [ 260s] Building for target armv7l-tizen-linux [ 260s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.A996Qu [ 260s] + umask 022 [ 260s] + cd /home/abuild/rpmbuild/BUILD [ 260s] + LANG=C [ 260s] + export LANG [ 260s] + unset DISPLAY [ 260s] + cd /home/abuild/rpmbuild/BUILD [ 260s] + rm -rf intltool-0.41.0 [ 260s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/intltool-0.41.0.tar.gz [ 260s] + /bin/tar -xf - [ 260s] + STATUS=0 [ 260s] + '[' 0 -ne 0 ']' [ 260s] + cd intltool-0.41.0 [ 260s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 260s] + echo 'Patch #0 (schemas-merge.patch):' [ 260s] Patch #0 (schemas-merge.patch): [ 260s] + /bin/cat /home/abuild/rpmbuild/SOURCES/schemas-merge.patch [ 260s] + /usr/bin/patch -s -p1 --fuzz=2 [ 260s] + exit 0 [ 260s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TMG5Np [ 260s] + umask 022 [ 260s] + cd /home/abuild/rpmbuild/BUILD [ 260s] + cd intltool-0.41.0 [ 260s] + LANG=C [ 260s] + export LANG [ 260s] + unset DISPLAY [ 260s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 260s] + export CFLAGS [ 260s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 260s] + export CXXFLAGS [ 260s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 260s] + export FFLAGS [ 260s] + LD_AS_NEEDED=1 [ 260s] + export LD_AS_NEEDED [ 260s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 260s] + export CFLAGS [ 260s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 260s] + export CXXFLAGS [ 260s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 260s] + export FFLAGS [ 260s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 260s] configure: WARNING: unrecognized options: --disable-static [ 260s] checking for a BSD-compatible install... /usr/bin/install -c [ 261s] checking whether build environment is sane... yes [ 261s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 261s] checking for gawk... gawk [ 261s] checking whether make sets $(MAKE)... yes [ 261s] checking for perl... /usr/bin/perl [ 261s] checking for perl >= 5.8.1... 5.12.1 [ 262s] checking for XML::Parser... ok [ 262s] configure: creating ./config.status [ 262s] config.status: creating Makefile [ 262s] config.status: creating doc/Makefile [ 262s] config.status: creating intltoolize [ 262s] config.status: creating tests/Makefile [ 262s] config.status: creating tests/cases/Makefile [ 262s] config.status: creating tests/results/Makefile [ 262s] config.status: creating tests/selftest.pl [ 262s] configure: WARNING: unrecognized options: --disable-static [ 262s] + make -j6 [ 262s] Making all in tests [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] Making all in cases [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] make[2]: Nothing to be done for `all'. [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] Making all in results [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[2]: Nothing to be done for `all'. [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[2]: Nothing to be done for `all-am'. [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] Making all in doc [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[1]: Nothing to be done for `all'. [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.41.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-extract.in > intltool-extract [ 262s] sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.41.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-merge.in > intltool-merge [ 262s] sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.41.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-update.in > intltool-update [ 262s] sed -e 's|[@]PACKAGE@|intltool|g' -e 's|[@]VERSION@|0.41.0|g' -e "s|[@]INTLTOOL_PERL@|/usr/bin/perl|g" -e "s|[@]INTLTOOL_LIBDIR@|/usr/lib|g" < intltool-prepare.in > intltool-prepare [ 262s] chmod +x intltool-prepare [ 262s] chmod +x intltool-merge [ 262s] chmod +x intltool-update [ 262s] chmod +x intltool-extract [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] + exit 0 [ 262s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.k17Yjs [ 262s] + umask 022 [ 262s] + cd /home/abuild/rpmbuild/BUILD [ 262s] + cd intltool-0.41.0 [ 262s] + LANG=C [ 262s] + export LANG [ 262s] + unset DISPLAY [ 262s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 262s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 262s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 262s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm install [ 262s] Making install in tests [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] Making install in cases [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] make[3]: Nothing to be done for `install-exec-am'. [ 262s] make[3]: Nothing to be done for `install-data-am'. [ 262s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/cases' [ 262s] Making install in results [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[3]: Nothing to be done for `install-exec-am'. [ 262s] make[3]: Nothing to be done for `install-data-am'. [ 262s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests/results' [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[3]: Nothing to be done for `install-exec-am'. [ 262s] make[3]: Nothing to be done for `install-data-am'. [ 262s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/tests' [ 262s] Making install in doc [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[2]: Nothing to be done for `install-exec-am'. [ 262s] test -z "/usr/share/man/man8" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8" [ 262s] /usr/bin/install -c -m 644 'intltoolize.8' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8/intltoolize.8' [ 262s] /usr/bin/install -c -m 644 'intltool-extract.8' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8/intltool-extract.8' [ 262s] /usr/bin/install -c -m 644 'intltool-merge.8' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8/intltool-merge.8' [ 262s] /usr/bin/install -c -m 644 'intltool-prepare.8' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8/intltool-prepare.8' [ 262s] /usr/bin/install -c -m 644 'intltool-update.8' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/man/man8/intltool-update.8' [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0/doc' [ 262s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin" [ 262s] /usr/bin/install -c 'intltool-extract' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin/intltool-extract' [ 262s] /usr/bin/install -c 'intltool-merge' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin/intltool-merge' [ 262s] /usr/bin/install -c 'intltool-update' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin/intltool-update' [ 262s] /usr/bin/install -c 'intltoolize' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin/intltoolize' [ 262s] /usr/bin/install -c 'intltool-prepare' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/bin/intltool-prepare' [ 262s] test -z "/usr/share/aclocal" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/aclocal" [ 262s] /usr/bin/install -c -m 644 'intltool.m4' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/aclocal/intltool.m4' [ 262s] test -z "/usr/share/intltool" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/intltool" [ 262s] /usr/bin/install -c -m 644 'Makefile.in.in' '/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/intltool/Makefile.in.in' [ 262s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/intltool-0.41.0' [ 262s] + rm -f /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/info/dir [ 262s] + xargs rm -f -- [ 262s] + find /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm -regex '.*\.la$' [ 262s] + xargs rm -f -- [ 262s] + find /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm -regex '.*\.a$' [ 262s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/intltool-0.41.0 [ 262s] + /usr/lib/rpm/check-buildroot [ 262s] + /usr/lib/rpm//brp-compress [ 262s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 262s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 262s] + /usr/lib/rpm/brp-python-hardlink [ 262s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 262s] Processing files: intltool-0.41.0-1.1.armv7l [ 262s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.rtuaQv [ 262s] + umask 022 [ 262s] + cd /home/abuild/rpmbuild/BUILD [ 262s] + cd intltool-0.41.0 [ 262s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/doc/intltool-0.41.0 [ 262s] + export DOCDIR [ 262s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/doc/intltool-0.41.0 [ 262s] + cp -pr AUTHORS COPYING README /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm/usr/share/doc/intltool-0.41.0 [ 262s] + exit 0 [ 263s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 263s] Requires: /bin/sh /usr/bin/perl perl(Cwd) perl(Encode) perl(File::Basename) perl(File::Copy) perl(File::Find) perl(Getopt::Long) perl(Text::Wrap) perl(bytes) perl(strict) [ 263s] Processing files: intltool-debuginfo-0.41.0-1.1.armv7l [ 263s] Processing files: intltool-debugsource-0.41.0-1.1.armv7l [ 263s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 264s] Wrote: /home/abuild/rpmbuild/SRPMS/intltool-0.41.0-1.1.src.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/intltool-0.41.0-1.1.armv7l.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/intltool-debuginfo-0.41.0-1.1.armv7l.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/intltool-debugsource-0.41.0-1.1.armv7l.rpm [ 264s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QInm8q [ 264s] + umask 022 [ 264s] + cd /home/abuild/rpmbuild/BUILD [ 264s] + cd intltool-0.41.0 [ 264s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/intltool-0.41.0-1.1.arm [ 264s] + exit 0 [ 264s] ... checking for files with abuild user/group [ 264s] ... creating baselibs [ 265s] ... saving built statistics [ 265s] /.build/build: line 3144: mount: command not found [ 266s] ERROR: no root disk device found, yet another new device name? [ 266s] ls: cannot access /sys/block/: No such file or directory [ 266s] /.build/build: line 3159: umount: command not found [ 266s] ... saving built packages [ 267s] /home/abuild/rpmbuild/RPMS/armv7l/intltool-0.41.0-1.1.armv7l.rpm [ 267s] /home/abuild/rpmbuild/RPMS/armv7l/intltool-debuginfo-0.41.0-1.1.armv7l.rpm [ 267s] /home/abuild/rpmbuild/RPMS/armv7l/intltool-debugsource-0.41.0-1.1.armv7l.rpm [ 268s] /home/abuild/rpmbuild/SRPMS/intltool-0.41.0-1.1.src.rpm [ 269s] /home/abuild/rpmbuild/OTHER/_statistics [ 271s] [ 271s] w17 finished "build intltool.spec" at Tue Feb 3 09:27:11 UTC 2015. [ 271s] [ 275s] [ 258.167727] SysRq : Power Off [ 276s] [ 258.384359] Power down. [ 276s] build: extracting built packages... [ 276s] intltool-0.41.0-1.1.armv7l.rpm [ 276s] intltool-debuginfo-0.41.0-1.1.armv7l.rpm [ 276s] intltool-debugsource-0.41.0-1.1.armv7l.rpm [ 276s] intltool-0.41.0-1.1.src.rpm [ 276s] _statistics Retried build at Tue Feb 3 11:52:12 2015 returned same result, skipped