[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:libcamsrcjpegenc-sw-libjpeg.spec" at Tue Feb 3 20:22:24 UTC 2015. [ 0s] [ 0s] Building libcamsrcjpegenc-sw-libjpeg for project 'Tizen:2.3:Mobile' repository 'target' arch 'armv7l' srcmd5 '5fc6b841a03d5d1dfb5763111fb73b97' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] cycle: system-resource -> libresourced [ 4s] breaking dependency libresourced -> system-resource [ 4s] cycle: system-resource -> system-resource-resourced [ 4s] breaking dependency system-resource-resourced -> system-resource [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 4s] cycle: libsensord -> sensord [ 4s] breaking dependency libsensord -> sensord [ 4s] done [ 12s] booting kvm ... [ 12s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 6 [ 14s] [ 0.000000] tsc: Fast TSC calibration failed [ 15s] doing fast boot [ 15s] Creating device nodes with udev [ 18s] Waiting for device /dev/vda to appear: ok [ 18s] fsck from util-linux 2.21.2 [ 18s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 18s] /dev/vda: clean, 4900/2392064 files, 244198/9568256 blocks [ 18s] fsck succeeded. Mounting root device read-write. [ 18s] Mounting root /dev/vda [ 18s] mount -o rw -t ext4 /dev/vda /root [ 18s] replacing /etc/mtab with symlink to /proc/self/mounts [ 18s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 19s] 2nd stage started in virtual machine [ 19s] machine type: armv7l [ 19s] switching personality to 8... [ 19s] 2nd stage started in virtual machine [ 19s] machine type: armv7l [ 19s] /.build/build: line 770: mount: command not found [ 19s] swapon on /dev/vdb [ 19s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 19s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 19s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 19s] logging output to //.build.log... [ 19s] processing specfile /.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec ... [ 20s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libcamsrcjpegenc-sw-libjpeg.spec build rpmlint-Factory ... [ 20s] running rpm-x86-arm postinstall script [ 20s] running rpm-libs-x86-arm postinstall script [ 20s] running tizen-accelerator postinstall script [ 21s] running bash-x86-arm postinstall script [ 21s] initializing rpm db... [ 27s] [1/251] installing cross-armv7l-platformfile-0.0.1-1.1 [ 28s] [2/251] installing kernel-headers-linux-3.0-3.0.101-1.2 [ 28s] [3/251] installing libX11-common-1.5.0-1.1 [ 28s] [4/251] installing tizen-release-2.2.0-1.1 [ 28s] [5/251] installing tzdata-2013h-1.1 [ 29s] [6/251] installing libgcc-4.6.4-1.15 [ 29s] [7/251] installing setup-0.1-1.1 [ 31s] [8/251] installing filesystem-0.1-1.1 [ 31s] warning: group lock does not exist - using root [ 31s] [9/251] installing eglibc-2.13-1.11 [ 32s] [10/251] installing libstdc++-4.6.4-1.15 [ 32s] [11/251] installing eglibc-common-2.13-1.11 [ 33s] [12/251] installing libstdc++-devel-4.6.4-1.15 [ 33s] [13/251] installing opengl-es-virtual-drv-0.1.6-1.4 [ 33s] [14/251] installing bash-4.1-1.1 [ 33s] [15/251] installing bzip2-libs-1.0.5-1.2 [ 33s] [16/251] installing c-ares-1.10.0_4-1.1 [ 33s] [17/251] installing capi-base-common-0.1.7-1.1 [ 33s] [18/251] installing cpio-2.8-1.1 [ 34s] [19/251] installing diffutils-3.0-1.1 [ 34s] [20/251] installing e2fsprogs-libs-1.41.9-1.2 [ 34s] [21/251] installing elfutils-libelf-0.152-1.9 [ 35s] [22/251] installing embryo-1.6.0+svn.76491slp2+build07-4.1 [ 35s] [23/251] installing expat-2.0.1-1.2 [ 35s] [24/251] installing fdupes-1.40-1.1 [ 35s] [25/251] installing findutils-4.2.31-1.1 [ 35s] [26/251] installing fribidi-0.19.6-1.1 [ 35s] [27/251] installing gdbm-1.8.3-1.3 [ 35s] [28/251] installing libXau-1.0.7-1.1 [ 35s] [29/251] installing libasound-1.0.25-1.0.25-1.1 [ 35s] [30/251] installing libattr-2.4.44-1.2 [ 36s] [31/251] installing libdrm2-2.4.35-1.1 [ 36s] [32/251] installing libffi-3.0.9-1.1 [ 36s] [33/251] installing libflac-1.2.1+slp2+build04-1.1 [ 36s] [34/251] installing libgomp-4.6.4-1.15 [ 36s] [35/251] installing libidn-1.15-1.1 [ 36s] [36/251] installing libjpeg-turbo-1.2.0-1.1 [ 36s] [37/251] installing liblua-5.1.4-1.2 [ 37s] [38/251] installing libogg-1.2.1-1.1 [ 37s] [39/251] installing libuuid-2.20.2-1.1 [ 37s] [40/251] installing lzo-2.03-1.3 [ 37s] [41/251] installing m4-1.4.14-1.1 [ 37s] [42/251] installing net-tools-1.60-1.2 [ 37s] [43/251] installing nspr-4.9-1.10 [ 38s] [44/251] installing nss-softokn-freebl-3.12.9-1.13 [ 38s] [45/251] installing openssl-1.0.1k-1.6 [ 38s] [46/251] installing patch-2.6-1.1 [ 38s] [47/251] installing pixman-0.28.2-1.1 [ 38s] [48/251] installing pkg-config-0.25-1.2 [ 38s] [49/251] installing popt-1.16-1.2 [ 38s] [50/251] installing readline-5.2-1.2 [ 39s] [51/251] installing sed-4.1.5-1.1 [ 39s] [52/251] installing smack-1.0+s14-1.2 [ 39s] [53/251] installing sqlite-3.7.13-1.2 [ 39s] [54/251] installing tar-1.17-1.2 [ 39s] [55/251] installing xz-libs-5.0.3-1.3 [ 39s] [56/251] installing zlib-1.2.5-1.10 [ 39s] [57/251] installing gmp-4.2.1-1.2 [ 39s] [58/251] installing libpcre-7.7-1.3 [ 40s] [59/251] installing ncurses-libs-5.7-1.2 [ 40s] [60/251] installing build-compare-2009.10.14-1.5 [ 40s] [61/251] installing qemu.x86_64-1.2-2.1 [ 42s] [62/251] installing capi-base-common-devel-0.1.7-1.1 [ 42s] [63/251] installing eglibc-headers-2.13-1.11 [ 42s] [64/251] installing libcap-2.21-1.2 [ 43s] [65/251] installing libjpeg-turbo-devel-1.2.0-1.1 [ 43s] [66/251] installing unzip-6.0-1.7 [ 43s] [67/251] installing zlib-devel-1.2.5-1.10 [ 43s] [68/251] installing freetype-2.4.9-1.1 [ 43s] [69/251] installing grep-2.5.1a-1.1 [ 43s] [70/251] installing libacl-2.2.49-1.2 [ 43s] [71/251] installing libfile-5.04-1.2 [ 43s] [72/251] installing libiri-1.7-1.1 [ 43s] [73/251] installing libpng-1.2.50-1.1 [ 44s] [74/251] installing libvorbis-1.2.3-1.1 [ 44s] [75/251] installing libxcb-1.8.1-1.1 [ 44s] [76/251] installing libxml2-2.7.8-1.2 [ 44s] [77/251] installing lzo-minilzo-2.03-1.3 [ 44s] [78/251] installing make-3.82-1.2 [ 44s] [79/251] installing mpfr-3.0.0-1.2 [ 44s] [80/251] installing ncurses-5.7-1.2 [ 44s] [81/251] installing systemd-libs-210-5.4 [ 44s] [82/251] installing bzip2-1.0.5-1.2 [ 45s] [83/251] installing glib2-2.32.3-1.2 [ 45s] [84/251] installing kmod-libs-15-1.1 [ 45s] [85/251] installing libblkid-2.20.2-1.1 [ 45s] [86/251] installing libicu-51-1.2 [ 45s] [87/251] installing smack-utils-1.0+s14-1.2 [ 45s] [88/251] installing xz-5.0.3-1.3 [ 46s] [89/251] installing binutils-2.22-1.5 [ 46s] [90/251] installing elfutils-libs-0.152-1.9 [ 46s] [91/251] installing libcurl-7.28.1_26-1.1 [ 46s] [92/251] installing nss-3.12.9-1.13 [ 46s] [93/251] installing perl-5.12.1-1.4 [ 48s] [94/251] installing ncurses-base-5.7-1.2 [ 48s] [95/251] installing perl-HTML-Tagset-3.20-1.1 [ 48s] [96/251] installing perl-IO-Compress-Base-2.008-1.4 [ 48s] [97/251] installing perl-Module-Pluggable-3.60-1.4 [ 48s] [98/251] installing perl-Pod-Escapes-1.04-1.4 [ 48s] [99/251] installing perl-TimeDate-1.20-1.1 [ 48s] [100/251] installing eglibc-devel-2.13-1.11 [ 48s] [101/251] installing smack-privilege-config-1.0.8-1.1 [ 48s] /var/tmp/rpm-tmp.UwsZgL: line 2: which: command not found [ 48s] api_feature_loader not present [ 48s] [102/251] installing file-5.04-1.2 [ 49s] [103/251] installing lzo-devel-2.03-1.3 [ 49s] [104/251] installing perl-Compress-Raw-Zlib-2.008-1.4 [ 49s] [105/251] installing perl-devel-5.12.1-1.4 [ 49s] [106/251] installing perl-libs-5.12.1-1.4 [ 49s] [107/251] installing coreutils-6.9-1.5 [ 49s] [108/251] installing libX11-1.5.0-1.1 [ 49s] [109/251] installing libdlog-0.4.1-1.1 [ 49s] [110/251] installing libmount-2.20.2-1.1 [ 49s] [111/251] installing mpc-0.9-1.2 [ 50s] [112/251] installing xz-lzma-compat-5.0.3-1.3 [ 50s] [113/251] installing elfutils-0.152-1.9 [ 50s] [114/251] installing harfbuzz-0.9.7-1.1 [ 50s] [115/251] installing nss-sysinit-3.12.9-1.13 [ 50s] [116/251] installing libsndfile-1.0.28-1.1 [ 50s] [117/251] installing rpm-libs-4.9.1-1.1 [ 50s] [118/251] installing perl-ExtUtils-ParseXS-2.18-1.4 [ 50s] [119/251] installing perl-Pod-Simple-3.07-1.4 [ 50s] [120/251] installing perl-Test-Simple-0.80-1.4 [ 51s] [121/251] installing tizen-accelerator-1.0.1-1.1 [ 51s] [122/251] installing eina-1.7.1+svn.77445+build35-1.1 [ 51s] [123/251] installing giflib-4.1.6-1.1 [ 51s] [124/251] installing libXcomposite-0.4.4-1.1 [ 51s] [125/251] installing libXdamage-1.1.3-1.1 [ 51s] [126/251] installing libXext-1.3.1-1.1 [ 51s] [127/251] installing libXfixes-5.0-1.1 [ 52s] [128/251] installing libXrender-0.9.7-1.1 [ 52s] [129/251] installing libdlog-devel-0.4.1-1.1 [ 52s] [130/251] installing libmm-common-0.2.84-1.1 [ 52s] [131/251] installing libremix-0.2.4+build14-1.1 [ 52s] [132/251] installing perl-IO-Compress-Zlib-2.008-1.4 [ 52s] [133/251] installing perl-Test-Harness-3.12-1.4 [ 53s] [134/251] installing gawk-3.1.5-1.4 [ 53s] [135/251] installing gzip-1.3.12-1.1 [ 53s] [136/251] installing libcamsrcjpegenc-0.1.9-1.1 [ 53s] [137/251] installing xdgmime-0.0.12-1.1 [ 53s] [138/251] installing app-checker-0.0.20-1.1 [ 54s] [139/251] installing build-2011.01.10a-1.1 [ 54s] [140/251] installing bundle-0.1.35-1.1 [ 54s] [141/251] installing rpm-4.9.1-1.1 [ 55s] [142/251] installing cpp-4.6.4-1.15 [ 55s] [143/251] installing libslp-db-util-0.1.8-1.1 [ 55s] [144/251] installing dbus-1.6.4-1.1 [ 56s] [145/251] installing util-linux-2.20.2-1.1 [ 56s] [146/251] installing fontconfig-2.9.0-1.1 [ 58s] /opt/var/cache/fontconfig/*: No such file or directory [ 58s] [147/251] installing glib2-devel-2.32.3-1.2 [ 59s] [148/251] installing libprivilege-control-0.0.89-1.1 [ 67s] Applying sql update files on db [ 67s] /opt/dbspace/.rules-db.db3 [ 67s] Creating database from scratch [ 67s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 67s] Done. [ 67s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 67s] Done. [ 67s] [149/251] installing libcamsrcjpegenc-devel-0.1.9-1.1 [ 67s] [150/251] installing libmm-log-devel-0.1.9-1.1 [ 67s] [151/251] installing bzip2-libs-x86-arm-1.0.5-1.1 [ 67s] [152/251] installing dbus-libs-1.6.4-1.1 [ 68s] [153/251] installing eglibc-x86-arm-2.13-1.2 [ 68s] [154/251] installing elfutils-libelf-x86-arm-0.152-1.1 [ 68s] [155/251] installing elfutils-libs-x86-arm-0.152-1.2 [ 68s] [156/251] installing gmp-x86-arm-4.2.1-1.1 [ 69s] [157/251] installing libacl-x86-arm-2.2.49-1.1 [ 69s] [158/251] installing libattr-x86-arm-2.4.44-1.1 [ 69s] [159/251] installing libcap-x86-arm-2.21-1.1 [ 69s] [160/251] installing libfile-x86-arm-5.04-1.2 [ 69s] [161/251] installing libgcc-x86-arm-4.6.4-1.1 [ 69s] [162/251] installing liblua-x86-arm-5.1.4-1.1 [ 69s] [163/251] installing mpc-x86-arm-0.9-1.1 [ 69s] [164/251] installing mpfr-x86-arm-3.0.0-1.1 [ 70s] [165/251] installing ncurses-libs-x86-arm-5.7-1.2 [ 70s] [166/251] installing nspr-x86-arm-4.9-1.2 [ 70s] [167/251] installing nss-softokn-freebl-x86-arm-3.12.9-1.2 [ 70s] [168/251] installing nss-x86-arm-3.12.9-1.2 [ 70s] [169/251] installing perl-ExtUtils-MakeMaker-6.36-1.4 [ 70s] [170/251] installing popt-x86-arm-1.16-1.1 [ 70s] [171/251] installing rpm-libs-x86-arm-4.9.1-1.2 [ 71s] [172/251] installing sqlite-x86-arm-3.7.13-1.1 [ 71s] [173/251] installing xz-libs-x86-arm-5.0.3-1.1 [ 71s] [174/251] installing zlib-x86-arm-1.2.5-1.1 [ 71s] [175/251] installing ecore-1.7.1+svn.77580+build125-7.1 [ 71s] [176/251] installing libXgesture-0.1.1-1.1 [ 71s] [177/251] installing libXi-1.6.1-1.1 [ 71s] [178/251] installing libXinerama-1.1.2-1.1 [ 71s] [179/251] installing libXtst-1.2.0-1.1 [ 71s] [180/251] installing libXv-1.0.7-1.1 [ 72s] [181/251] installing libdri2-0.1.0-1.1 [ 72s] [182/251] installing app-checker-server-0.0.20-1.1 [ 72s] [183/251] installing eet-1.7.1+svn.77495+build14-3.8 [ 72s] [184/251] installing libXcursor-1.1.13-1.1 [ 72s] [185/251] installing libXrandr-1.4.0-1.1 [ 72s] [186/251] installing librua-0.1.8-1.1 [ 72s] [187/251] installing systemd-210-5.4 [ 73s] [188/251] installing gcc-4.6.4-1.15 [ 73s] [189/251] installing rpm-build-4.9.1-1.1 [ 73s] [190/251] installing libjournal-0.1.0-1.1 [ 73s] [191/251] installing perl-CPAN-1.9205-1.4 [ 73s] [192/251] installing bash-x86-arm-4.1-1.1 [ 73s] [193/251] installing dbus-glib-0.100-1.1 [ 74s] [194/251] installing ecore-imf-1.7.1+svn.77580+build125-7.1 [ 74s] [195/251] installing ecore-input-1.7.1+svn.77580+build125-7.1 [ 74s] [196/251] installing fdupes-x86-arm-1.40-1.1 [ 74s] [197/251] installing findutils-x86-arm-4.2.31-1.1 [ 74s] [198/251] installing gawk-x86-arm-3.1.5-1.2 [ 74s] [199/251] installing gzip-x86-arm-1.3.12-1.1 [ 74s] [200/251] installing libmm-common-devel-0.2.84-1.1 [ 74s] [201/251] installing make-x86-arm-3.82-1.1 [ 74s] [202/251] installing sed-x86-arm-4.1.5-1.1 [ 75s] [203/251] installing tar-x86-arm-1.17-1.2 [ 75s] [204/251] installing diffutils-x86-arm-3.0-1.1 [ 75s] [205/251] installing patch-x86-arm-2.6-1.1 [ 75s] [206/251] installing autoconf-2.68-1.1 [ 75s] [207/251] installing coreutils-x86-arm-6.9-1.1 [ 78s] [208/251] installing ecore-con-1.7.1+svn.77580+build125-7.1 [ 78s] [209/251] installing file-x86-arm-5.04-1.1 [ 78s] [210/251] installing libslp-utilx-0.4.5-1.1 [ 78s] [211/251] installing libtbm-1.1.1-1.1 [ 78s] [212/251] installing vconf-0.2.83-1.1 [ 78s] Failed to get D-Bus connection: Unknown error 4294967295 [ 78s] warning: %post(vconf-0.2.83-1.1.armv7l) scriptlet failed, exit status 1 [ 78s] [213/251] installing elfutils-x86-arm-0.152-1.2 [ 78s] [214/251] installing gcc-c++-4.6.4-1.15 [ 79s] [215/251] installing security-server-0.0.125-1.1 [ 79s] Failed to get D-Bus connection: Unknown error 4294967295 [ 79s] Failed to get D-Bus connection: Unknown error 4294967295 [ 79s] [216/251] installing evas-1.7.1+svn.77561+build187-10.1 [ 79s] [217/251] installing rpm-x86-arm-4.9.1-1.2 [ 79s] /bin/rpm.orig-arm already present - skipping. [ 79s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 79s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 79s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 79s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 79s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 79s] [218/251] installing rpm-build-x86-arm-4.9.1-1.2 [ 79s] [219/251] installing libtbm-devel-1.1.1-1.1 [ 79s] [220/251] installing automake-1.11.1-1.1 [ 80s] [221/251] installing ecore-fb-1.7.1+svn.77580+build125-7.1 [ 80s] [222/251] installing ecore-file-1.7.1+svn.77580+build125-7.1 [ 80s] [223/251] installing ecore-imf-evas-1.7.1+svn.77580+build125-7.1 [ 80s] [224/251] installing ecore-ipc-1.7.1+svn.77580+build125-7.1 [ 80s] [225/251] installing libsecurity-server-client-0.0.125-1.1 [ 80s] [226/251] installing ecore-input-evas-1.7.1+svn.77580+build125-7.1 [ 80s] [227/251] installing edbus-1.6.0+svn.76526slp2+build10-1.1 [ 80s] [228/251] installing libsensord-1.1.17-1.1 [ 80s] [229/251] installing ail-0.2.95-1.1 [ 81s] [230/251] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-1.4 [ 82s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 82s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 82s] [231/251] installing pkgmgr-info-0.0.230-1.1 [ 82s] [232/251] installing ecore-x-1.7.1+svn.77580+build125-7.1 [ 82s] [233/251] installing libtool-2.2.6b-1.2 [ 82s] [234/251] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-1.4 [ 83s] [235/251] installing efreet-1.7.1+svn.77412+build14-1.1 [ 83s] [236/251] installing sensord-1.1.17-1.1 [ 83s] [237/251] installing libresourced-0.2.86-1.1 [ 83s] [238/251] installing pkgmgr-info-parser-0.0.230-1.1 [ 83s] [239/251] installing ecore-evas-1.7.1+svn.77580+build125-7.1 [ 83s] [240/251] installing edje-1.7.1+svn.77330+build179-1.1 [ 83s] [241/251] installing system-resource-resourced-0.2.86-1.1 [ 84s] [242/251] installing aul-0.2.3.0-1.1 [ 84s] [243/251] installing system-resource-0.2.86-1.1 [ 84s] [244/251] installing app-core-common-1.3.40-1.1 [ 84s] [245/251] installing ethumb-1.6.0+svn.75994slp2+build09-1.1 [ 84s] [246/251] installing elementary-1.7.1+svn.77535+build567-1.1 [ 84s] [247/251] installing app-core-efl-1.3.40-1.1 [ 84s] [248/251] installing capi-media-tool-0.1.1-1.1 [ 84s] [249/251] installing capi-media-tool-devel-0.1.1-1.1 [ 84s] [250/251] installing libmm-utility-0.31-1.1 [ 84s] [251/251] installing libmm-utility-devel-0.31-1.1 [ 85s] removing nis flags from //etc/nsswitch.conf... [ 85s] now finalizing build dir... [ 85s] /.build/build: line 2585: mount: command not found [ 85s] /.build/build: line 2586: mount: command not found [ 88s] build target is armv7l-tizen-linux [ 88s] ----------------------------------------------------------------- [ 88s] I have the following modifications for libcamsrcjpegenc-sw-libjpeg.spec: [ 88s] 5c5 [ 88s] < Release: 0 [ 88s] --- [ 88s] > Release: 1.1 [ 88s] ----------------------------------------------------------------- [ 88s] ----- building libcamsrcjpegenc-sw-libjpeg.spec (user abuild) [ 88s] ----------------------------------------------------------------- [ 88s] ----------------------------------------------------------------- [ 88s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/5fc6b841a03d5d1dfb5763111fb73b97-libcamsrcjpegenc-sw-libjpeg' /home/abuild/rpmbuild/SOURCES/libcamsrcjpegenc-sw-libjpeg.spec [ 88s] Building target platforms: armv7l-tizen-linux [ 88s] Building for target armv7l-tizen-linux [ 88s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.2LMB1Q [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + rm -rf libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 88s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libcamsrcjpegenc-sw-libjpeg-0.1.15.tar.gz [ 88s] + /bin/tar -xf - [ 88s] + STATUS=0 [ 88s] + '[' 0 -ne 0 ']' [ 88s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 88s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 88s] + exit 0 [ 88s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lB5vju [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 88s] + LANG=C [ 88s] + export LANG [ 88s] + unset DISPLAY [ 88s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 88s] + export CFLAGS [ 88s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 88s] + export CXXFLAGS [ 88s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 88s] + export FFLAGS [ 88s] + LD_AS_NEEDED=1 [ 88s] + export LD_AS_NEEDED [ 88s] + export 'CFLAGS+= -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable' [ 88s] + CFLAGS+=' -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable' [ 88s] + export 'CFLAGS+= -DTIZEN_DEBUG_ENABLE' [ 88s] + CFLAGS+=' -DTIZEN_DEBUG_ENABLE' [ 88s] + ./autogen.sh [ 103s] libtoolize: putting auxiliary files in `.'. [ 103s] libtoolize: copying file `./ltmain.sh' [ 103s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 103s] libtoolize: copying file `m4/ltsugar.m4' [ 103s] libtoolize: copying file `m4/ltversion.m4' [ 103s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 121s] configure.ac:19: installing `./config.guess' [ 121s] configure.ac:19: installing `./config.sub' [ 122s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE' [ 122s] + export CFLAGS [ 122s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 122s] + export CXXFLAGS [ 122s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 122s] + export FFLAGS [ 122s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-dlog [ 123s] checking for a BSD-compatible install... /usr/bin/install -c [ 124s] checking whether build environment is sane... yes [ 124s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 124s] checking for gawk... gawk [ 124s] checking whether make sets $(MAKE)... yes [ 124s] checking for armv7l-unknown-linux-gnueabi-g++... no [ 124s] checking for armv7l-unknown-linux-gnueabi-c++... no [ 124s] checking for armv7l-unknown-linux-gnueabi-gpp... no [ 124s] checking for armv7l-unknown-linux-gnueabi-aCC... no [ 124s] checking for armv7l-unknown-linux-gnueabi-CC... no [ 124s] checking for armv7l-unknown-linux-gnueabi-cxx... no [ 124s] checking for armv7l-unknown-linux-gnueabi-cc++... no [ 124s] checking for armv7l-unknown-linux-gnueabi-cl.exe... no [ 124s] checking for armv7l-unknown-linux-gnueabi-FCC... no [ 124s] checking for armv7l-unknown-linux-gnueabi-KCC... no [ 124s] checking for armv7l-unknown-linux-gnueabi-RCC... no [ 124s] checking for armv7l-unknown-linux-gnueabi-xlC_r... no [ 124s] checking for armv7l-unknown-linux-gnueabi-xlC... no [ 124s] checking for g++... g++ [ 124s] checking whether the C++ compiler works... yes [ 124s] checking for C++ compiler default output file name... a.out [ 124s] checking for suffix of executables... [ 124s] checking whether we are cross compiling... no [ 124s] checking for suffix of object files... o [ 124s] checking whether we are using the GNU C++ compiler... yes [ 124s] checking whether g++ accepts -g... yes [ 124s] checking for style of include used by make... GNU [ 124s] checking dependency style of g++... gcc3 [ 124s] checking for gawk... (cached) gawk [ 124s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 124s] checking for gcc... gcc [ 124s] checking whether we are using the GNU C compiler... yes [ 124s] checking whether gcc accepts -g... yes [ 124s] checking for gcc option to accept ISO C89... none needed [ 124s] checking dependency style of gcc... gcc3 [ 124s] checking how to run the C preprocessor... gcc -E [ 124s] checking whether ln -s works... yes [ 124s] checking whether make sets $(MAKE)... (cached) yes [ 124s] checking build system type... armv7l-unknown-linux-gnueabi [ 124s] checking host system type... armv7l-unknown-linux-gnueabi [ 124s] checking for a sed that does not truncate output... /bin/sed [ 124s] checking for grep that handles long lines and -e... /bin/grep [ 125s] checking for egrep... /bin/grep -E [ 125s] checking for fgrep... /bin/grep -F [ 125s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 125s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 125s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 125s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 125s] checking the maximum length of command line arguments... 1572864 [ 125s] checking whether the shell understands some XSI constructs... yes [ 125s] checking whether the shell understands "+="... yes [ 125s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 125s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 125s] checking for objdump... objdump [ 125s] checking how to recognize dependent libraries... pass_all [ 125s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 125s] checking for ar... ar [ 125s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 125s] checking for strip... strip [ 125s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 125s] checking for ranlib... ranlib [ 125s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 125s] checking for ANSI C header files... yes [ 125s] checking for sys/types.h... yes [ 125s] checking for sys/stat.h... yes [ 125s] checking for stdlib.h... yes [ 125s] checking for string.h... yes [ 125s] checking for memory.h... yes [ 125s] checking for strings.h... yes [ 125s] checking for inttypes.h... yes [ 125s] checking for stdint.h... yes [ 125s] checking for unistd.h... yes [ 125s] checking for dlfcn.h... yes [ 125s] checking whether we are using the GNU C++ compiler... (cached) yes [ 125s] checking whether g++ accepts -g... (cached) yes [ 125s] checking dependency style of g++... (cached) gcc3 [ 125s] checking how to run the C++ preprocessor... g++ -E [ 125s] checking for objdir... .libs [ 125s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 125s] checking for gcc option to produce PIC... -fPIC -DPIC [ 125s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 125s] checking if gcc static flag -static works... no [ 125s] checking if gcc supports -c -o file.o... yes [ 125s] checking if gcc supports -c -o file.o... (cached) yes [ 126s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 126s] checking whether -lc should be explicitly linked in... no [ 126s] checking dynamic linker characteristics... GNU/Linux ld.so [ 126s] checking how to hardcode library paths into programs... immediate [ 126s] checking whether stripping libraries is possible... yes [ 126s] checking if libtool supports shared libraries... yes [ 126s] checking whether to build shared libraries... yes [ 126s] checking whether to build static libraries... no [ 126s] checking for ld used by g++... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 126s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 126s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 126s] checking for g++ option to produce PIC... -fPIC -DPIC [ 126s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 126s] checking if g++ static flag -static works... no [ 126s] checking if g++ supports -c -o file.o... yes [ 126s] checking if g++ supports -c -o file.o... (cached) yes [ 126s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 126s] checking dynamic linker characteristics... GNU/Linux ld.so [ 126s] checking how to hardcode library paths into programs... immediate [ 126s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 126s] checking for pkg-config... /usr/bin/pkg-config [ 126s] checking pkg-config is at least version 0.9.0... yes [ 126s] checking for DLOG... yes [ 126s] checking for ANSI C header files... (cached) yes [ 126s] checking malloc.h usability... yes [ 126s] checking malloc.h presence... yes [ 126s] checking for malloc.h... yes [ 126s] checking sys/mman.h usability... yes [ 126s] checking sys/mman.h presence... yes [ 126s] checking for sys/mman.h... yes [ 126s] checking sys/ioctl.h usability... yes [ 126s] checking sys/ioctl.h presence... yes [ 126s] checking for sys/ioctl.h... yes [ 126s] checking for an ANSI C-conforming const... yes [ 126s] checking whether time.h and sys/time.h may both be included... yes [ 126s] checking for stdlib.h... (cached) yes [ 126s] checking for GNU libc compatible malloc... yes [ 126s] checking for gethostname... yes [ 126s] checking for gettimeofday... yes [ 127s] checking for memset... yes [ 127s] checking for uname... yes [ 127s] checking for GLIB... yes [ 127s] checking for CAMSRCJPEGENC... yes [ 127s] checking for MMUTIL_IMGP... yes [ 127s] configure: creating ./config.status [ 128s] config.status: creating Makefile [ 128s] config.status: creating src/Makefile [ 128s] config.status: creating config.h [ 128s] config.status: executing depfiles commands [ 128s] config.status: executing libtool commands [ 128s] + make -j6 [ 128s] make all-recursive [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] Making all in src [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -MT libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -MD -MP -MF .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo -c -o libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo `test -f 'camsrcjpegenc-sw-libjpeg.c' || echo './'`camsrcjpegenc-sw-libjpeg.c [ 128s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -MT libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -MD -MP -MF .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo -c camsrcjpegenc-sw-libjpeg.c -fPIC -DPIC -o .libs/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.o [ 128s] mv -f .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Tpo .deps/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.Plo [ 128s] /bin/sh ../libtool --tag=CC --mode=link gcc -I./include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/media -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -DUSE_DLOG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -Wcast-align -Wcast-qual -Wextra -Wno-array-bounds -Wno-empty-body -Wno-ignored-qualifiers -Wno-unused-parameter -Wshadow -Wwrite-strings -Wswitch-default -Wno-unused-but-set-parameter -Wno-unused-but-set-variable -DTIZEN_DEBUG_ENABLE -o libcamsrcjpegenc-sw.la -rpath /usr/lib libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.lo -ldlog -lpthread -lcapi-base-common -lglib-2.0 -ljpeg -lcamsrcjpegenc -lmmutil_imgp -lcapi-media-tool -lmmfcommon -ltbm -lglib-2.0 -ldlog -lpthread -lcapi-base-common [ 128s] libtool: link: gcc -shared .libs/libcamsrcjpegenc_sw_la-camsrcjpegenc-sw-libjpeg.o -Wl,--as-needed -ljpeg -lcamsrcjpegenc -lmmutil_imgp -lcapi-media-tool -lmmfcommon -ltbm -lglib-2.0 -ldlog -lpthread -lcapi-base-common -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,libcamsrcjpegenc-sw.so.0 -o .libs/libcamsrcjpegenc-sw.so.0.0.0 [ 128s] libtool: link: (cd ".libs" && rm -f "libcamsrcjpegenc-sw.so.0" && ln -s "libcamsrcjpegenc-sw.so.0.0.0" "libcamsrcjpegenc-sw.so.0") [ 128s] libtool: link: (cd ".libs" && rm -f "libcamsrcjpegenc-sw.so" && ln -s "libcamsrcjpegenc-sw.so.0.0.0" "libcamsrcjpegenc-sw.so") [ 128s] libtool: link: ( cd ".libs" && rm -f "libcamsrcjpegenc-sw.la" && ln -s "../libcamsrcjpegenc-sw.la" "libcamsrcjpegenc-sw.la" ) [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] + exit 0 [ 128s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ugmzuz [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 128s] + LANG=C [ 128s] + export LANG [ 128s] + unset DISPLAY [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 128s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 128s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/share/license [ 128s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/share/license/libcamsrcjpegenc-sw-libjpeg [ 128s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm install [ 128s] Making install in src [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib" [ 128s] /bin/sh ../libtool --mode=install /usr/bin/install -c libcamsrcjpegenc-sw.la '/home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib' [ 128s] libtool: install: /usr/bin/install -c .libs/libcamsrcjpegenc-sw.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib/libcamsrcjpegenc-sw.so.0.0.0 [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib && { ln -s -f libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so.0 || { rm -f libcamsrcjpegenc-sw.so.0 && ln -s libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so.0; }; }) [ 128s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib && { ln -s -f libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so || { rm -f libcamsrcjpegenc-sw.so && ln -s libcamsrcjpegenc-sw.so.0.0.0 libcamsrcjpegenc-sw.so; }; }) [ 128s] libtool: install: /usr/bin/install -c .libs/libcamsrcjpegenc-sw.lai /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib/libcamsrcjpegenc-sw.la [ 128s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 128s] make[2]: Nothing to be done for `install-data-am'. [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15/src' [ 128s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] make[2]: Nothing to be done for `install-exec-am'. [ 128s] make[2]: Nothing to be done for `install-data-am'. [ 128s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15' [ 128s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/share/info/dir [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm -regex '.*\.la$' [ 128s] + xargs rm -f -- [ 128s] + find /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm -regex '.*\.a$' [ 128s] + xargs rm -f -- [ 128s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 128s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm/usr/lib/libcamsrcjpegenc-sw.so.0.0.0 [ 129s] symlinked /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug to /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.debug [ 129s] symlinked /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.0.0.0.debug to /usr/lib/debug/usr/lib/libcamsrcjpegenc-sw.so.debug [ 129s] 47 blocks [ 129s] + /usr/lib/rpm/check-buildroot [ 129s] + /usr/lib/rpm//brp-compress [ 129s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 129s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 129s] + /usr/lib/rpm/brp-python-hardlink [ 129s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 129s] Processing files: libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.armv7l [ 129s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 129s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 129s] [ 129s] Provides: libcamsrcjpegenc-sw.so.0 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcamsrcjpegenc-sw.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libjpeg.so.8 libjpeg.so.8(LIBJPEG_8.0) [ 129s] Processing files: libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-1.1.armv7l [ 129s] Processing files: libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-1.1.armv7l [ 129s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 129s] Wrote: /home/abuild/rpmbuild/SRPMS/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.src.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.armv7l.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-1.1.armv7l.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-1.1.armv7l.rpm [ 129s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.zC2Cmc [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd libcamsrcjpegenc-sw-libjpeg-0.1.15 [ 129s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.arm [ 129s] + exit 0 [ 129s] ... checking for files with abuild user/group [ 129s] ... creating baselibs [ 130s] ... saving built statistics [ 130s] /.build/build: line 3144: mount: command not found [ 130s] ERROR: no root disk device found, yet another new device name? [ 130s] ls: cannot access /sys/block/: No such file or directory [ 130s] /.build/build: line 3159: umount: command not found [ 130s] ... saving built packages [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-1.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/RPMS/armv7l/libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-1.1.armv7l.rpm [ 130s] /home/abuild/rpmbuild/SRPMS/libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.src.rpm [ 130s] /home/abuild/rpmbuild/OTHER/_statistics [ 130s] [ 130s] w21 finished "build libcamsrcjpegenc-sw-libjpeg.spec" at Tue Feb 3 20:24:34 UTC 2015. [ 130s] [ 131s] /.build/build: line 368: 226 Killed background_monitor_process [ 133s] [ 119.287253] SysRq : Power Off [ 133s] [ 119.404327] Power down. [ 133s] build: extracting built packages... [ 133s] libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.armv7l.rpm [ 133s] libcamsrcjpegenc-sw-libjpeg-debuginfo-0.1.15-1.1.armv7l.rpm [ 133s] libcamsrcjpegenc-sw-libjpeg-debugsource-0.1.15-1.1.armv7l.rpm [ 133s] libcamsrcjpegenc-sw-libjpeg-0.1.15-1.1.src.rpm [ 133s] _statistics Retried build at Wed Feb 4 05:12:00 2015 returned same result, skipped Retried build at Thu Feb 5 22:30:08 2015 returned same result, skipped