[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:capi-network-serial.spec" at Tue Feb 3 05:48:38 UTC 2015. [ 0s] [ 0s] Building capi-network-serial for project 'Tizen:2.3:Mobile' repository 'target' arch 'i586' srcmd5 '6e3a1afeea639ceb4b7443cd6c89c00d' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:capi-network-serial.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 2s] [15/31] preinstalling sed... [ 2s] [16/31] preinstalling sqlite... [ 2s] [17/31] preinstalling tar... [ 2s] [18/31] preinstalling xz-libs... [ 2s] [19/31] preinstalling zlib... [ 2s] [20/31] preinstalling bash... [ 2s] [21/31] preinstalling diffutils... [ 2s] [22/31] preinstalling libstdc++... [ 2s] [23/31] preinstalling eglibc-common... [ 2s] [24/31] preinstalling libacl... [ 2s] [25/31] preinstalling libcap... [ 2s] [26/31] preinstalling libfile... [ 2s] [27/31] preinstalling bzip2... [ 2s] [28/31] preinstalling nss... [ 2s] [29/31] preinstalling coreutils... [ 2s] [30/31] preinstalling rpm-libs... [ 2s] [31/31] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: ppl -> ppl-pwl [ 3s] breaking dependency ppl -> ppl-pwl [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm -> rpm-libs [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 8s] [ 0.000000] tsc: Fast TSC calibration failed [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 19s] Waiting for device /dev/vda to appear: ok [ 19s] fsck from util-linux 2.21.2 [ 19s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 19s] /dev/vda: clean, 4077/2392064 files, 190744/9568256 blocks [ 19s] fsck succeeded. Mounting root device read-write. [ 19s] Mounting root /dev/vda [ 19s] mount -o rw -t ext4 /dev/vda /root [ 20s] replacing /etc/mtab with symlink to /proc/self/mounts [ 20s] 2nd stage started in virtual machine [ 20s] machine type: x86_64 [ 20s] switching personality to 8... [ 20s] 2nd stage started in virtual machine [ 20s] machine type: i686 [ 20s] /.build/build: line 770: mount: command not found [ 20s] swapon on /dev/vdb [ 20s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 20s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 20s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 20s] logging output to //.build.log... [ 20s] processing specfile /.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 20s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 21s] initializing rpm db... [ 21s] [1/119] installing cloog-0.16.1-1.3 [ 21s] [2/119] installing kernel-headers-3.0.15-2.1 [ 21s] [3/119] installing tizen-release-2.2.0-1.1 [ 21s] [4/119] installing tzdata-2013h-1.1 [ 21s] [5/119] installing libgcc-4.6.4-1.7 [ 21s] [6/119] installing setup-0.1-1.1 [ 21s] [7/119] installing filesystem-0.1-1.1 [ 21s] warning: group lock does not exist - using root [ 21s] [8/119] installing eglibc-2.13-1.8 [ 21s] [9/119] installing libstdc++-4.6.4-1.7 [ 22s] [10/119] installing bzip2-libs-1.0.5-1.2 [ 22s] [11/119] installing capi-base-common-0.1.7-1.1 [ 22s] [12/119] installing cpio-2.8-1.1 [ 22s] [13/119] installing e2fsprogs-libs-1.41.9-1.1 [ 22s] [14/119] installing elfutils-libelf-0.152-1.10 [ 22s] [15/119] installing expat-2.0.1-1.2 [ 22s] [16/119] installing findutils-4.2.31-1.1 [ 22s] [17/119] installing gdbm-1.8.3-1.2 [ 22s] [18/119] installing libattr-2.4.44-1.3 [ 22s] [19/119] installing libffi-3.0.9-1.1 [ 22s] [20/119] installing liblua-5.1.4-1.2 [ 22s] [21/119] installing libstdc++-devel-4.6.4-1.7 [ 22s] [22/119] installing libuuid-2.20.2-1.1 [ 22s] [23/119] installing lzo-2.03-1.2 [ 22s] [24/119] installing m4-1.4.14-1.1 [ 22s] [25/119] installing net-tools-1.60-1.3 [ 22s] [26/119] installing nspr-4.9-1.7 [ 22s] [27/119] installing nss-softokn-freebl-3.12.9-1.15 [ 22s] [28/119] installing openssl-1.0.1k-1.4 [ 22s] [29/119] installing pkgconfig-0.25-3.1 [ 22s] [30/119] installing popt-1.16-1.2 [ 22s] [31/119] installing readline-5.2-1.2 [ 22s] [32/119] installing sed-4.1.5-1.1 [ 22s] [33/119] installing smack-1.0+s14-1.2 [ 22s] [34/119] installing sqlite-3.7.13-1.2 [ 23s] [35/119] installing tar-1.17-1.1 [ 23s] [36/119] installing xz-libs-5.0.3-1.2 [ 23s] [37/119] installing zlib-1.2.5-1.10 [ 23s] [38/119] installing bash-4.1-1.1 [ 23s] [39/119] installing diffutils-3.0-1.1 [ 23s] [40/119] installing libgomp-4.6.4-1.7 [ 23s] [41/119] installing patch-2.6-1.1 [ 23s] [42/119] installing gmp-4.2.1-1.2 [ 23s] [43/119] installing libpcre-7.7-1.2 [ 23s] [44/119] installing ncurses-libs-5.7-1.2 [ 23s] [45/119] installing build-compare-2009.10.14-1.4 [ 23s] [46/119] installing capi-base-common-devel-0.1.7-1.1 [ 23s] [47/119] installing eglibc-headers-2.13-1.8 [ 23s] [48/119] installing grep-2.5.1a-1.1 [ 23s] [49/119] installing libacl-2.2.49-1.1 [ 23s] [50/119] installing libcap-2.21-1.2 [ 23s] [51/119] installing libfile-5.04-1.2 [ 23s] [52/119] installing libxml2-2.7.8-1.2 [ 23s] [53/119] installing lzo-minilzo-2.03-1.2 [ 23s] [54/119] installing make-3.82-1.1 [ 23s] [55/119] installing mpfr-3.0.0-1.2 [ 23s] [56/119] installing ncurses-5.7-1.2 [ 23s] [57/119] installing unzip-6.0-1.6 [ 23s] [58/119] installing zlib-devel-1.2.5-1.10 [ 24s] [59/119] installing bzip2-1.0.5-1.2 [ 24s] [60/119] installing glib2-2.32.3-1.1 [ 24s] [61/119] installing libblkid-2.20.2-1.1 [ 24s] [62/119] installing xz-5.0.3-1.2 [ 24s] [63/119] installing smack-utils-1.0+s14-1.2 [ 24s] [64/119] installing binutils-2.22-1.3 [ 24s] [65/119] installing dbus-1.6.4-9.1 [ 24s] [66/119] installing elfutils-libs-0.152-1.10 [ 24s] [67/119] installing ppl-0.11.2-1.2 [ 24s] [68/119] installing nss-3.12.9-1.15 [ 24s] [69/119] installing perl-5.12.1-1.3 [ 26s] [70/119] installing ncurses-base-5.7-1.2 [ 26s] [71/119] installing perl-HTML-Tagset-3.20-1.1 [ 26s] [72/119] installing perl-IO-Compress-Base-2.008-1.3 [ 26s] [73/119] installing perl-Module-Pluggable-3.60-1.3 [ 26s] [74/119] installing perl-Pod-Escapes-1.04-1.3 [ 26s] [75/119] installing perl-TimeDate-1.20-1.1 [ 26s] [76/119] installing dbus-libs-1.6.4-9.1 [ 26s] [77/119] installing eglibc-devel-2.13-1.8 [ 26s] [78/119] installing file-5.04-1.2 [ 26s] [79/119] installing perl-Compress-Raw-Zlib-2.008-1.3 [ 26s] [80/119] installing perl-libs-5.12.1-1.3 [ 27s] [81/119] installing coreutils-6.9-1.1 [ 28s] [82/119] installing libdlog-0.4.1-1.1 [ 42s] [83/119] installing libmount-2.20.2-1.1 [ 42s] [84/119] installing lzo-devel-2.03-1.2 [ 44s] [85/119] installing mpc-0.9-1.2 [ 49s] [86/119] installing perl-devel-5.12.1-1.3 [ 51s] [87/119] installing xz-lzma-compat-5.0.3-1.2 [ 51s] [88/119] installing cloog-ppl-0.16.1-1.3 [ 52s] [89/119] installing nss-sysinit-3.12.9-1.15 [ 52s] [90/119] installing ppl-pwl-0.11.2-1.2 [ 53s] [91/119] installing elfutils-0.152-1.10 [ 53s] [92/119] installing eglibc-common-2.13-1.8 [ 58s] [93/119] installing libarchive-2.8.3-1.1 [ 58s] [94/119] installing rpm-libs-4.9.1-5.1 [ 58s] [95/119] installing perl-ExtUtils-ParseXS-2.18-1.3 [ 59s] [96/119] installing perl-Pod-Simple-3.07-1.3 [ 60s] [97/119] installing perl-Test-Simple-0.80-1.3 [ 62s] [98/119] installing dbus-devel-1.6.4-9.1 [ 62s] [99/119] installing dbus-glib-0.100-1.1 [ 63s] [100/119] installing gawk-3.1.5-1.4 [ 63s] [101/119] installing gzip-1.3.12-1.1 [ 64s] [102/119] installing libdlog-devel-0.4.1-1.1 [ 64s] [103/119] installing perl-IO-Compress-Zlib-2.008-1.3 [ 65s] [104/119] installing perl-Test-Harness-3.12-1.3 [ 66s] [105/119] installing rpm-4.9.1-5.1 [ 68s] [106/119] installing build-2011.01.10a-1.1 [ 68s] [107/119] installing glib2-devel-2.32.3-1.1 [ 68s] [108/119] installing util-linux-2.20.2-1.1 [ 69s] [109/119] installing cmake-2.8.5-1.1 [ 69s] [110/119] installing cpp-4.6.4-1.7 [ 70s] [111/119] installing perl-ExtUtils-MakeMaker-6.36-1.3 [ 70s] [112/119] installing dbus-glib-devel-0.100-1.1 [ 70s] [113/119] installing gcc-4.6.4-1.7 [ 70s] [114/119] installing rpm-build-4.9.1-5.1 [ 70s] [115/119] installing perl-CPAN-1.9205-1.3 [ 70s] [116/119] installing autoconf-2.68-1.1 [ 70s] [117/119] installing gcc-c++-4.6.4-1.7 [ 71s] [118/119] installing automake-1.11.1-1.1 [ 71s] [119/119] installing libtool-2.2.6b-1.2 [ 72s] removing nis flags from //etc/nsswitch.conf... [ 72s] now finalizing build dir... [ 72s] /.build/build: line 2585: mount: command not found [ 72s] /.build/build: line 2586: mount: command not found [ 73s] ----------------------------------------------------------------- [ 73s] I have the following modifications for capi-network-serial.spec: [ 73s] 5c5 [ 73s] < Release: 0 [ 73s] --- [ 73s] > Release: 1.1 [ 73s] ----------------------------------------------------------------- [ 73s] ----- building capi-network-serial.spec (user abuild) [ 73s] ----------------------------------------------------------------- [ 73s] ----------------------------------------------------------------- [ 73s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/6e3a1afeea639ceb4b7443cd6c89c00d-capi-network-serial' /home/abuild/rpmbuild/SOURCES/capi-network-serial.spec [ 73s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Zkosfm [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + rm -rf capi-network-serial-0.0.9 [ 73s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-serial-0.0.9.tar.gz [ 73s] + /bin/tar -xf - [ 73s] + STATUS=0 [ 73s] + '[' 0 -ne 0 ']' [ 73s] + cd capi-network-serial-0.0.9 [ 73s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 73s] + exit 0 [ 73s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.m2MvTq [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd capi-network-serial-0.0.9 [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 73s] + export CFLAGS [ 73s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 73s] + export CXXFLAGS [ 73s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 73s] + export FFLAGS [ 73s] + LD_AS_NEEDED=1 [ 73s] + export LD_AS_NEEDED [ 73s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -DTIZEN_ENGINEER_MODE' [ 73s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -DTIZEN_ENGINEER_MODE' [ 73s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -DTIZEN_ENGINEER_MODE' [ 73s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -DTIZEN_ENGINEER_MODE' [ 73s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 73s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 73s] ++ echo 0.0.9 [ 73s] ++ awk 'BEGIN {FS="."}{print $1}' [ 73s] + MAJORVER=0 [ 73s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.0.9 -DMAJORVER=0 [ 73s] -- The C compiler identification is GNU [ 73s] -- The CXX compiler identification is GNU [ 73s] -- Check for working C compiler: /usr/bin/gcc [ 73s] -- Check for working C compiler: /usr/bin/gcc -- works [ 73s] -- Detecting C compiler ABI info [ 73s] -- Detecting C compiler ABI info - done [ 73s] -- Check for working CXX compiler: /usr/bin/c++ [ 73s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 73s] -- Detecting CXX compiler ABI info [ 73s] -- Detecting CXX compiler ABI info - done [ 73s] -- checking for module 'dlog glib-2.0 capi-base-common dbus-glib-1' [ 73s] -- found dlog glib-2.0 capi-base-common dbus-glib-1, version 1.0;2.32.3;0.1.7;0.100 [ 73s] -- Configuring done [ 73s] -- Generating done [ 73s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.9 [ 73s] + make -j4 [ 73s] Scanning dependencies of target capi-network-serial [ 73s] [100%] Building C object CMakeFiles/capi-network-serial.dir/src/serial.c.o [ 73s] Linking C shared library libcapi-network-serial.so [ 73s] [100%] Built target capi-network-serial [ 73s] + exit 0 [ 73s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.4gB7Rx [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd capi-network-serial-0.0.9 [ 73s] + LANG=C [ 73s] + export LANG [ 73s] + unset DISPLAY [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 install [ 73s] [100%] Built target capi-network-serial [ 73s] Install the project... [ 73s] -- Install configuration: "" [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/lib/libcapi-network-serial.so.0.0.9 [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/lib/libcapi-network-serial.so.0 [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/lib/libcapi-network-serial.so [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/include/network [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/include/network/serial.h [ 73s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/lib/pkgconfig/capi-network-serial.pc [ 73s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/share/info/dir [ 73s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 -regex '.*\.la$' [ 73s] + xargs rm -f -- [ 73s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 -regex '.*\.a$' [ 73s] + xargs rm -f -- [ 73s] + install -D -m 0644 LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/share/license/capi-network-serial [ 73s] + install -D -m 0644 LICENSE /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/share/license/capi-network-serial-devel [ 73s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.9 [ 73s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386/usr/lib/libcapi-network-serial.so.0.0.9 [ 73s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.9.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.debug [ 73s] symlinked /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.0.9.debug to /usr/lib/debug/usr/lib/libcapi-network-serial.so.0.debug [ 73s] 38 blocks [ 73s] + /usr/lib/rpm/check-buildroot [ 73s] + /usr/lib/rpm//brp-compress [ 73s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 73s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 73s] + /usr/lib/rpm/brp-python-hardlink [ 73s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] Processing files: capi-network-serial-0.0.9-1.1.i586 [ 73s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 73s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 73s] [ 73s] Provides: libcapi-network-serial.so.0 [ 73s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 73s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-glib-1.so.2 libdlog.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.0) [ 73s] Processing files: capi-network-serial-devel-0.0.9-1.1.i586 [ 73s] Provides: pkgconfig(capi-network-serial) [ 73s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 73s] Requires: /usr/bin/pkg-config libcapi-network-serial.so.0 pkgconfig(capi-base-common) [ 73s] Processing files: capi-network-serial-debuginfo-0.0.9-1.1.i586 [ 73s] Processing files: capi-network-serial-debugsource-0.0.9-1.1.i586 [ 73s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.9-1.1.src.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-0.0.9-1.1.i586.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-devel-0.0.9-1.1.i586.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-debuginfo-0.0.9-1.1.i586.rpm [ 73s] Wrote: /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-debugsource-0.0.9-1.1.i586.rpm [ 73s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ivr4th [ 73s] + umask 022 [ 73s] + cd /home/abuild/rpmbuild/BUILD [ 73s] + cd capi-network-serial-0.0.9 [ 73s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.9-1.1.i386 [ 73s] + exit 0 [ 73s] ... checking for files with abuild user/group [ 73s] ... creating baselibs [ 74s] ... saving built statistics [ 74s] /.build/build: line 3144: mount: command not found [ 74s] ERROR: no root disk device found, yet another new device name? [ 74s] ls: cannot access /sys/block/: No such file or directory [ 74s] /.build/build: line 3159: umount: command not found [ 74s] ... saving built packages [ 74s] /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-0.0.9-1.1.i586.rpm [ 74s] /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-debuginfo-0.0.9-1.1.i586.rpm [ 74s] /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-debugsource-0.0.9-1.1.i586.rpm [ 74s] /home/abuild/rpmbuild/RPMS/i586/capi-network-serial-devel-0.0.9-1.1.i586.rpm [ 74s] /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.9-1.1.src.rpm [ 74s] /home/abuild/rpmbuild/OTHER/_statistics [ 74s] [ 74s] w20 finished "build capi-network-serial.spec" at Tue Feb 3 05:49:50 UTC 2015. [ 74s] [ 75s] /.build/build: line 368: 219 Killed background_monitor_process [ 77s] [ 68.066689] SysRq : Power Off [ 77s] [ 68.176324] Power down. [ 77s] build: extracting built packages... [ 78s] capi-network-serial-0.0.9-1.1.i586.rpm [ 78s] capi-network-serial-debuginfo-0.0.9-1.1.i586.rpm [ 78s] capi-network-serial-debugsource-0.0.9-1.1.i586.rpm [ 78s] capi-network-serial-devel-0.0.9-1.1.i586.rpm [ 78s] capi-network-serial-0.0.9-1.1.src.rpm [ 78s] _statistics Retried build at Mon Feb 2 21:54:55 2015 returned same result, skipped Retried build at Tue Feb 3 02:29:39 2015 returned same result, skipped Retried build at Thu Feb 5 21:01:55 2015 returned same result, skipped