[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:python-urlgrabber.spec" at Tue Feb 3 05:55:51 UTC 2015. [ 0s] [ 0s] Building python-urlgrabber for project 'Tizen:2.3:Mobile' repository 'target' arch 'i586' srcmd5 '34591b4d3ca426db0f1e2394014a1860' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:python-urlgrabber.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:python-urlgrabber.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:python-urlgrabber.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 2s] reordering...cycle: bash -> eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> bash [ 2s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 2s] breaking dependency eglibc-common -> coreutils [ 2s] cycle: eglibc -> eglibc-common [ 2s] breaking dependency eglibc-common -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> findutils [ 2s] breaking dependency eglibc-common -> findutils [ 2s] cycle: eglibc -> eglibc-common -> grep [ 2s] breaking dependency grep -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 2s] breaking dependency libpcre -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 2s] breaking dependency libpcre -> libgcc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 2s] breaking dependency libstdc++ -> eglibc [ 2s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 2s] breaking dependency eglibc -> eglibc-common [ 2s] cycle: eglibc -> libgcc [ 2s] breaking dependency libgcc -> eglibc [ 2s] cycle: filesystem -> setup [ 2s] breaking dependency setup -> filesystem [ 2s] cycle: ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses [ 2s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 2s] breaking dependency ncurses-libs -> ncurses-base [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl -> perl-libs [ 2s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 2s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl -> perl-IO-Compress-Zlib [ 2s] breaking dependency perl -> perl-IO-Compress-Zlib [ 2s] cycle: perl -> perl-IO-Compress-Base [ 2s] breaking dependency perl -> perl-IO-Compress-Base [ 2s] cycle: perl -> perl-Module-Pluggable [ 2s] breaking dependency perl -> perl-Module-Pluggable [ 2s] cycle: perl -> perl-Pod-Simple [ 2s] breaking dependency perl -> perl-Pod-Simple [ 2s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 2s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 2s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 2s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 2s] cycle: perl-CPAN -> perl-Test-Harness [ 2s] breaking dependency perl-Test-Harness -> perl-CPAN [ 2s] cycle: ppl -> ppl-pwl [ 2s] breaking dependency ppl -> ppl-pwl [ 2s] cycle: nss-sysinit -> nss [ 2s] breaking dependency nss -> nss-sysinit [ 2s] cycle: rpm -> rpm-libs [ 2s] breaking dependency rpm-libs -> rpm [ 2s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 5s] doing fast boot [ 6s] Creating device nodes with udev [ 6s] Waiting for device /dev/vda to appear: ok [ 6s] fsck from util-linux 2.21.2 [ 6s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 6s] /dev/vda: clean, 4060/2392064 files, 189846/9568256 blocks [ 6s] fsck succeeded. Mounting root device read-write. [ 6s] Mounting root /dev/vda [ 6s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:python-urlgrabber.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:python-urlgrabber.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 6s] [1/108] installing cloog-0.16.1-1.3 [ 7s] [2/108] installing kernel-headers-3.0.15-2.1 [ 7s] [3/108] installing tizen-release-2.2.0-1.1 [ 7s] [4/108] installing tzdata-2013h-1.1 [ 7s] [5/108] installing libgcc-4.6.4-1.7 [ 7s] [6/108] installing setup-0.1-1.1 [ 7s] [7/108] installing filesystem-0.1-1.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/108] installing eglibc-2.13-1.8 [ 7s] [9/108] installing libstdc++-4.6.4-1.7 [ 7s] [10/108] installing bzip2-libs-1.0.5-1.2 [ 7s] [11/108] installing c-ares-1.10.0_4-1.1 [ 7s] [12/108] installing cpio-2.8-1.1 [ 7s] [13/108] installing e2fsprogs-libs-1.41.9-1.1 [ 8s] [14/108] installing elfutils-libelf-0.152-1.10 [ 8s] [15/108] installing findutils-4.2.31-1.1 [ 8s] [16/108] installing gdbm-1.8.3-1.2 [ 8s] [17/108] installing libattr-2.4.44-1.3 [ 8s] [18/108] installing libidn-1.15-1.1 [ 8s] [19/108] installing liblua-5.1.4-1.2 [ 8s] [20/108] installing libstdc++-devel-4.6.4-1.7 [ 8s] [21/108] installing libuuid-2.20.2-1.1 [ 8s] [22/108] installing lzo-2.03-1.2 [ 8s] [23/108] installing m4-1.4.14-1.1 [ 8s] [24/108] installing net-tools-1.60-1.3 [ 8s] [25/108] installing nspr-4.9-1.7 [ 8s] [26/108] installing nss-softokn-freebl-3.12.9-1.15 [ 8s] [27/108] installing openssl-1.0.1k-1.4 [ 8s] [28/108] installing pkgconfig-0.25-3.1 [ 8s] [29/108] installing popt-1.16-1.2 [ 8s] [30/108] installing readline-5.2-1.2 [ 8s] [31/108] installing sed-4.1.5-1.1 [ 8s] [32/108] installing sqlite-3.7.13-1.2 [ 8s] [33/108] installing tar-1.17-1.1 [ 8s] [34/108] installing xz-libs-5.0.3-1.2 [ 8s] [35/108] installing zlib-1.2.5-1.10 [ 8s] [36/108] installing bash-4.1-1.1 [ 8s] [37/108] installing diffutils-3.0-1.1 [ 8s] [38/108] installing libgomp-4.6.4-1.7 [ 8s] [39/108] installing patch-2.6-1.1 [ 9s] [40/108] installing gmp-4.2.1-1.2 [ 9s] [41/108] installing libpcre-7.7-1.2 [ 9s] [42/108] installing ncurses-libs-5.7-1.2 [ 9s] [43/108] installing build-compare-2009.10.14-1.4 [ 9s] [44/108] installing eglibc-headers-2.13-1.8 [ 9s] [45/108] installing grep-2.5.1a-1.1 [ 9s] [46/108] installing libacl-2.2.49-1.1 [ 9s] [47/108] installing libcap-2.21-1.2 [ 9s] [48/108] installing libfile-5.04-1.2 [ 9s] [49/108] installing libpython-2.7.1-1.5 [ 10s] [50/108] installing lzo-minilzo-2.03-1.2 [ 10s] [51/108] installing make-3.82-1.1 [ 10s] [52/108] installing mpfr-3.0.0-1.2 [ 10s] [53/108] installing ncurses-5.7-1.2 [ 10s] [54/108] installing unzip-6.0-1.6 [ 10s] [55/108] installing zlib-devel-1.2.5-1.10 [ 11s] [56/108] installing bzip2-1.0.5-1.2 [ 11s] [57/108] installing libblkid-2.20.2-1.1 [ 11s] [58/108] installing xz-5.0.3-1.2 [ 12s] [59/108] installing binutils-2.22-1.3 [ 12s] [60/108] installing elfutils-libs-0.152-1.10 [ 12s] [61/108] installing libcurl-7.28.1_26-1.1 [ 12s] [62/108] installing ppl-0.11.2-1.2 [ 15s] [63/108] installing nss-3.12.9-1.15 [ 18s] [64/108] installing perl-5.12.1-1.3 [ 36s] [65/108] installing ncurses-base-5.7-1.2 [ 36s] [66/108] installing perl-HTML-Tagset-3.20-1.1 [ 37s] [67/108] installing perl-IO-Compress-Base-2.008-1.3 [ 37s] [68/108] installing perl-Module-Pluggable-3.60-1.3 [ 37s] [69/108] installing perl-Pod-Escapes-1.04-1.3 [ 37s] [70/108] installing perl-TimeDate-1.20-1.1 [ 37s] [71/108] installing eglibc-devel-2.13-1.8 [ 37s] [72/108] installing file-5.04-1.2 [ 37s] [73/108] installing perl-Compress-Raw-Zlib-2.008-1.3 [ 38s] [74/108] installing perl-libs-5.12.1-1.3 [ 38s] [75/108] installing coreutils-6.9-1.1 [ 39s] [76/108] installing libmount-2.20.2-1.1 [ 39s] [77/108] installing lzo-devel-2.03-1.2 [ 40s] [78/108] installing mpc-0.9-1.2 [ 40s] [79/108] installing perl-devel-5.12.1-1.3 [ 41s] [80/108] installing xz-lzma-compat-5.0.3-1.2 [ 41s] [81/108] installing cloog-ppl-0.16.1-1.3 [ 41s] [82/108] installing nss-sysinit-3.12.9-1.15 [ 41s] [83/108] installing ppl-pwl-0.11.2-1.2 [ 41s] [84/108] installing python-base-2.7.1-1.5 [ 42s] [85/108] installing elfutils-0.152-1.10 [ 42s] [86/108] installing eglibc-common-2.13-1.8 [ 45s] [87/108] installing rpm-libs-4.9.1-5.1 [ 45s] [88/108] installing perl-ExtUtils-ParseXS-2.18-1.3 [ 46s] [89/108] installing perl-Pod-Simple-3.07-1.3 [ 46s] [90/108] installing perl-Test-Simple-0.80-1.3 [ 47s] [91/108] installing gawk-3.1.5-1.4 [ 47s] [92/108] installing gzip-1.3.12-1.1 [ 47s] [93/108] installing perl-IO-Compress-Zlib-2.008-1.3 [ 49s] [94/108] installing perl-Test-Harness-3.12-1.3 [ 49s] [95/108] installing rpm-4.9.1-5.1 [ 51s] [96/108] installing build-2011.01.10a-1.1 [ 51s] [97/108] installing python-devel-2.7.1-1.5 [ 52s] [98/108] installing python-pycurl-7.19.0-1.2 [ 52s] [99/108] installing util-linux-2.20.2-1.1 [ 52s] [100/108] installing cpp-4.6.4-1.7 [ 53s] [101/108] installing perl-ExtUtils-MakeMaker-6.36-1.3 [ 53s] [102/108] installing gcc-4.6.4-1.7 [ 54s] [103/108] installing rpm-build-4.9.1-5.1 [ 55s] [104/108] installing perl-CPAN-1.9205-1.3 [ 55s] [105/108] installing autoconf-2.68-1.1 [ 55s] [106/108] installing gcc-c++-4.6.4-1.7 [ 57s] [107/108] installing automake-1.11.1-1.1 [ 57s] [108/108] installing libtool-2.2.6b-1.2 [ 57s] removing nis flags from //etc/nsswitch.conf... [ 57s] now finalizing build dir... [ 57s] /.build/build: line 2585: mount: command not found [ 57s] /.build/build: line 2586: mount: command not found [ 59s] ----------------------------------------------------------------- [ 59s] I have the following modifications for python-urlgrabber.spec: [ 59s] 7c7 [ 59s] < Release: 1 [ 59s] --- [ 59s] > Release: 1.1 [ 59s] 62a63 [ 59s] > %changelog [ 59s] ----------------------------------------------------------------- [ 59s] ----- building python-urlgrabber.spec (user abuild) [ 59s] ----------------------------------------------------------------- [ 59s] ----------------------------------------------------------------- [ 59s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Mobile/target/34591b4d3ca426db0f1e2394014a1860-python-urlgrabber' /home/abuild/rpmbuild/SOURCES/python-urlgrabber.spec [ 59s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CRdzIA [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + rm -rf python-urlgrabber-3.9.1 [ 59s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python-urlgrabber-3.9.1.tar.gz [ 59s] + /bin/tar -xf - [ 59s] + STATUS=0 [ 59s] + '[' 0 -ne 0 ']' [ 59s] + cd python-urlgrabber-3.9.1 [ 59s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 59s] + echo 'Patch #0 (urlgrabber-HEAD.patch):' [ 59s] Patch #0 (urlgrabber-HEAD.patch): [ 59s] + /bin/cat /home/abuild/rpmbuild/SOURCES/urlgrabber-HEAD.patch [ 59s] + /usr/bin/patch -s -p1 --fuzz=2 [ 59s] + exit 0 [ 59s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.eNrjN1 [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd python-urlgrabber-3.9.1 [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 59s] + export CFLAGS [ 59s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 59s] + export CXXFLAGS [ 59s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 59s] + export FFLAGS [ 59s] + LD_AS_NEEDED=1 [ 59s] + export LD_AS_NEEDED [ 59s] + cp /home/abuild/rpmbuild/SOURCES/python-urlgrabber.manifest . [ 59s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 59s] + /usr/bin/python setup.py build [ 59s] running build [ 59s] running build_py [ 59s] creating build [ 59s] creating build/lib [ 59s] creating build/lib/urlgrabber [ 59s] copying urlgrabber/progress.py -> build/lib/urlgrabber [ 59s] copying urlgrabber/grabber.py -> build/lib/urlgrabber [ 59s] copying urlgrabber/byterange.py -> build/lib/urlgrabber [ 59s] copying urlgrabber/mirror.py -> build/lib/urlgrabber [ 59s] copying urlgrabber/__init__.py -> build/lib/urlgrabber [ 59s] running build_scripts [ 59s] creating build/scripts-2.7 [ 59s] copying and adjusting scripts/urlgrabber -> build/scripts-2.7 [ 59s] changing mode of build/scripts-2.7/urlgrabber from 644 to 755 [ 59s] + exit 0 [ 59s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.hUKHxt [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd python-urlgrabber-3.9.1 [ 59s] + LANG=C [ 59s] + export LANG [ 59s] + unset DISPLAY [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] + /usr/bin/python setup.py install --root=/home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 -O1 --prefix=/usr [ 59s] running install [ 59s] running build [ 59s] running build_py [ 59s] copying urlgrabber/progress.py -> build/lib/urlgrabber [ 59s] copying urlgrabber/grabber.py -> build/lib/urlgrabber [ 59s] running build_scripts [ 59s] running install_lib [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7 [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] copying build/lib/urlgrabber/progress.py -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] copying build/lib/urlgrabber/grabber.py -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] copying build/lib/urlgrabber/byterange.py -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] copying build/lib/urlgrabber/mirror.py -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] copying build/lib/urlgrabber/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber [ 59s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber/progress.py to progress.pyc [ 59s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber/grabber.py to grabber.pyc [ 59s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber/byterange.py to byterange.pyc [ 59s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber/mirror.py to mirror.pyc [ 59s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber/__init__.py to __init__.pyc [ 59s] writing byte-compilation script '/tmp/tmpVui2uq.py' [ 59s] /usr/bin/python -O /tmp/tmpVui2uq.py [ 59s] removing /tmp/tmpVui2uq.py [ 59s] running install_scripts [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/bin [ 59s] copying build/scripts-2.7/urlgrabber -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/bin [ 59s] changing mode of /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/bin/urlgrabber to 755 [ 59s] running install_data [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc [ 59s] creating /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/urlgrabber-3.9.1 [ 59s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/urlgrabber-3.9.1 [ 59s] copying LICENSE -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/urlgrabber-3.9.1 [ 59s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/urlgrabber-3.9.1 [ 59s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/urlgrabber-3.9.1 [ 59s] running install_egg_info [ 59s] Writing /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/lib/python2.7/site-packages/urlgrabber-3.9.1-py2.7.egg-info [ 59s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386//usr/share/doc/urlgrabber-3.9.1 [ 59s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/python-urlgrabber-3.9.1 [ 59s] + /usr/lib/rpm/check-buildroot [ 59s] + /usr/lib/rpm//brp-compress [ 59s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 59s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 59s] + /usr/lib/rpm/brp-python-hardlink [ 59s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] Processing files: python-urlgrabber-3.9.1-1.1.noarch [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.UNUjFW [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd python-urlgrabber-3.9.1 [ 59s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/python-urlgrabber-3.9.1 [ 59s] + export DOCDIR [ 59s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/python-urlgrabber-3.9.1 [ 59s] + cp -pr ChangeLog LICENSE README TODO /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386/usr/share/doc/python-urlgrabber-3.9.1 [ 59s] + exit 0 [ 59s] Provides: urlgrabber = 3.9.1-1.1 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /usr/bin/python python(abi) = 2.7 [ 59s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 59s] Wrote: /home/abuild/rpmbuild/SRPMS/python-urlgrabber-3.9.1-1.1.src.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python-urlgrabber-3.9.1-1.1.noarch.rpm [ 60s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6F7qtn [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd python-urlgrabber-3.9.1 [ 60s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 60s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-urlgrabber-3.9.1-1.1.i386 [ 60s] + exit 0 [ 60s] ... checking for files with abuild user/group [ 60s] ... creating baselibs [ 60s] ... saving built statistics [ 60s] /.build/build: line 3144: mount: command not found [ 60s] ERROR: no root disk device found, yet another new device name? [ 60s] ls: cannot access /sys/block/: No such file or directory [ 60s] /.build/build: line 3159: umount: command not found [ 60s] ... saving built packages [ 60s] /home/abuild/rpmbuild/RPMS/noarch/python-urlgrabber-3.9.1-1.1.noarch.rpm [ 60s] /home/abuild/rpmbuild/SRPMS/python-urlgrabber-3.9.1-1.1.src.rpm [ 60s] /home/abuild/rpmbuild/OTHER/_statistics [ 60s] [ 60s] w15 finished "build python-urlgrabber.spec" at Tue Feb 3 05:56:50 UTC 2015. [ 60s] [ 61s] /.build/build: line 368: 236 Killed background_monitor_process [ 63s] [ 58.393825] SysRq : Power Off [ 63s] [ 58.504282] Power down. [ 64s] build: extracting built packages... [ 64s] python-urlgrabber-3.9.1-1.1.noarch.rpm [ 64s] python-urlgrabber-3.9.1-1.1.src.rpm [ 64s] _statistics Retried build at Tue Feb 3 02:32:58 2015 returned same result, skipped Retried build at Thu Feb 5 21:06:04 2015 returned same result, skipped