[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w25 started "build _service:gbs:perl-Test-Pod.spec" at Tue Feb 3 05:44:45 UTC 2015. [ 0s] [ 0s] Building perl-Test-Pod for project 'Tizen:2.3:Wearable' repository 'emulator' arch 'i586' srcmd5 '46d6215a50a425176faacf264a062ea0' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:perl-Test-Pod.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:perl-Test-Pod.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:perl-Test-Pod.spec build rpmlint-Factory ... [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 0s] breaking dependency libacl -> eglibc [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: eglibc -> libgcc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: rpm -> rpm-libs [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/31] preinstalling tizen-release... [ 0s] [2/31] preinstalling libgcc... [ 0s] [3/31] preinstalling setup... [ 0s] [4/31] preinstalling filesystem... [ 0s] [5/31] preinstalling eglibc... [ 0s] [6/31] preinstalling bzip2-libs... [ 0s] [7/31] preinstalling elfutils-libelf... [ 0s] [8/31] preinstalling libattr... [ 0s] [9/31] preinstalling liblua... [ 0s] [10/31] preinstalling ncurses-libs... [ 0s] [11/31] preinstalling nspr... [ 0s] [12/31] preinstalling nss-softokn-freebl... [ 0s] [13/31] preinstalling popt... [ 0s] [14/31] preinstalling readline... [ 0s] [15/31] preinstalling sed... [ 0s] [16/31] preinstalling sqlite... [ 0s] [17/31] preinstalling tar... [ 0s] [18/31] preinstalling xz-libs... [ 0s] [19/31] preinstalling zlib... [ 0s] [20/31] preinstalling bash... [ 0s] [21/31] preinstalling diffutils... [ 0s] [22/31] preinstalling libstdc++... [ 0s] [23/31] preinstalling eglibc-common... [ 0s] [24/31] preinstalling libacl... [ 0s] [25/31] preinstalling libcap... [ 0s] [26/31] preinstalling libfile... [ 0s] [27/31] preinstalling bzip2... [ 0s] [28/31] preinstalling nss... [ 0s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 1s] [31/31] preinstalling rpm... [ 1s] [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl-libs -> perl [ 1s] [1/8] preinstalling e2fsprogs-libs... [ 1s] [2/8] preinstalling libpcre... [ 1s] [3/8] preinstalling libuuid... [ 1s] [4/8] preinstalling grep... [ 1s] [5/8] preinstalling libblkid... [ 1s] [6/8] preinstalling util-linux... [ 1s] [7/8] preinstalling perl-libs... [ 1s] [8/8] preinstalling perl... [ 1s] copying packages... [ 1s] reordering...cycle: bash -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> findutils [ 1s] breaking dependency eglibc-common -> findutils [ 1s] cycle: eglibc -> eglibc-common -> grep [ 1s] breaking dependency grep -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 1s] breaking dependency libpcre -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 1s] breaking dependency libpcre -> libgcc [ 1s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 1s] breaking dependency libstdc++ -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: ncurses -> ncurses-libs [ 1s] breaking dependency ncurses-libs -> ncurses [ 1s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 1s] breaking dependency ncurses-libs -> ncurses-base [ 1s] cycle: perl -> perl-libs [ 1s] breaking dependency perl -> perl-libs [ 1s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 1s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 1s] cycle: perl -> perl-IO-Compress-Zlib [ 1s] breaking dependency perl -> perl-IO-Compress-Zlib [ 1s] cycle: perl -> perl-IO-Compress-Base [ 1s] breaking dependency perl -> perl-IO-Compress-Base [ 1s] cycle: perl -> perl-Module-Pluggable [ 1s] breaking dependency perl -> perl-Module-Pluggable [ 1s] cycle: perl -> perl-Pod-Simple [ 1s] breaking dependency perl -> perl-Pod-Simple [ 1s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 1s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 1s] cycle: perl-devel -> perl-ExtUtils-ParseXS [ 1s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 1s] cycle: perl-CPAN -> perl-Test-Harness [ 1s] breaking dependency perl-Test-Harness -> perl-CPAN [ 1s] cycle: ppl -> ppl-pwl [ 1s] breaking dependency ppl -> ppl-pwl [ 1s] cycle: nss-sysinit -> nss [ 1s] breaking dependency nss -> nss-sysinit [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] done [ 2s] booting kvm ... [ 2s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 4s] [ 0.000000] tsc: Fast TSC calibration failed [ 5s] doing fast boot [ 5s] Creating device nodes with udev [ 5s] Waiting for device /dev/vda to appear: ok [ 5s] fsck from util-linux 2.21.2 [ 5s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 5s] /dev/vda: clean, 4053/2392064 files, 187686/9568256 blocks [ 5s] fsck succeeded. Mounting root device read-write. [ 5s] Mounting root /dev/vda [ 5s] mount -o rw -t ext4 /dev/vda /root [ 6s] replacing /etc/mtab with symlink to /proc/self/mounts [ 6s] 2nd stage started in virtual machine [ 6s] machine type: x86_64 [ 6s] switching personality to 8... [ 6s] 2nd stage started in virtual machine [ 6s] machine type: i686 [ 6s] /.build/build: line 770: mount: command not found [ 6s] swapon on /dev/vdb [ 6s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 6s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 6s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 6s] logging output to //.build.log... [ 6s] processing specfile /.build-srcdir/_service:gbs:perl-Test-Pod.spec ... [ 6s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-Test-Pod.spec build rpmlint-Factory ... [ 6s] initializing rpm db... [ 6s] [1/106] installing cloog-0.16.1-3.3 [ 6s] [2/106] installing kernel-headers-3.0.15-2.1 [ 6s] [3/106] installing tizen-release-2.2.0-3.1 [ 6s] [4/106] installing tzdata-2013h-3.1 [ 7s] [5/106] installing libgcc-4.6.4-3.7 [ 7s] [6/106] installing setup-0.1-3.1 [ 7s] [7/106] installing filesystem-0.1-3.1 [ 7s] warning: group lock does not exist - using root [ 7s] [8/106] installing eglibc-2.13-3.8 [ 7s] [9/106] installing libstdc++-4.6.4-3.7 [ 7s] [10/106] installing bzip2-libs-1.0.5-3.2 [ 7s] [11/106] installing cpio-2.8-3.1 [ 7s] [12/106] installing e2fsprogs-libs-1.41.9-3.1 [ 7s] [13/106] installing elfutils-libelf-0.152-3.10 [ 7s] [14/106] installing findutils-4.2.31-3.1 [ 7s] [15/106] installing gdbm-1.8.3-3.2 [ 7s] [16/106] installing libattr-2.4.44-3.2 [ 7s] [17/106] installing liblua-5.1.4-3.2 [ 7s] [18/106] installing libstdc++-devel-4.6.4-3.7 [ 7s] [19/106] installing libuuid-2.20.2-3.1 [ 7s] [20/106] installing lzo-2.03-3.2 [ 7s] [21/106] installing m4-1.4.14-3.1 [ 7s] [22/106] installing net-tools-1.60-3.2 [ 7s] [23/106] installing nspr-4.9-3.6 [ 7s] [24/106] installing nss-softokn-freebl-3.12.9-3.14 [ 8s] [25/106] installing pkgconfig-0.25-3.1 [ 8s] [26/106] installing popt-1.16-3.2 [ 8s] [27/106] installing readline-5.2-3.2 [ 8s] [28/106] installing sed-4.1.5-3.1 [ 8s] [29/106] installing sqlite-3.7.13-3.2 [ 8s] [30/106] installing tar-1.17-3.1 [ 8s] [31/106] installing xz-libs-5.0.3-3.2 [ 8s] [32/106] installing zlib-1.2.5-3.10 [ 8s] [33/106] installing bash-4.1-3.1 [ 8s] [34/106] installing diffutils-3.0-3.1 [ 8s] [35/106] installing libgomp-4.6.4-3.7 [ 8s] [36/106] installing patch-2.6-3.1 [ 8s] [37/106] installing gmp-4.2.1-3.2 [ 8s] [38/106] installing libpcre-7.7-3.2 [ 8s] [39/106] installing ncurses-libs-5.7-3.2 [ 8s] [40/106] installing build-compare-2009.10.14-3.3 [ 8s] [41/106] installing eglibc-headers-2.13-3.8 [ 8s] [42/106] installing grep-2.5.1a-3.1 [ 8s] [43/106] installing libacl-2.2.49-3.1 [ 8s] [44/106] installing libcap-2.21-3.2 [ 8s] [45/106] installing libfile-5.04-3.2 [ 8s] [46/106] installing lzo-minilzo-2.03-3.2 [ 8s] [47/106] installing make-3.82-3.1 [ 8s] [48/106] installing mpfr-3.0.0-3.2 [ 8s] [49/106] installing ncurses-5.7-3.2 [ 9s] [50/106] installing unzip-6.0-3.4 [ 9s] [51/106] installing zlib-devel-1.2.5-3.10 [ 9s] [52/106] installing bzip2-1.0.5-3.2 [ 9s] [53/106] installing libblkid-2.20.2-3.1 [ 9s] [54/106] installing xz-5.0.3-3.2 [ 9s] [55/106] installing binutils-2.22-3.5 [ 9s] [56/106] installing elfutils-libs-0.152-3.10 [ 9s] [57/106] installing ppl-0.11.2-3.2 [ 9s] [58/106] installing nss-3.12.9-3.14 [ 9s] [59/106] installing perl-5.12.1-3.3 [ 10s] [60/106] installing ncurses-base-5.7-3.2 [ 10s] [61/106] installing perl-HTML-Tagset-3.20-8.1 [ 10s] [62/106] installing perl-IO-Compress-Base-2.008-3.3 [ 10s] [63/106] installing perl-Module-Pluggable-3.60-3.3 [ 10s] [64/106] installing perl-Package-Constants-0.01-3.3 [ 10s] [65/106] installing perl-Pod-Escapes-1.04-3.3 [ 10s] [66/106] installing perl-TimeDate-1.20-1.1 [ 10s] [67/106] installing eglibc-devel-2.13-3.8 [ 10s] [68/106] installing file-5.04-3.2 [ 10s] [69/106] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 10s] [70/106] installing perl-libs-5.12.1-3.3 [ 10s] [71/106] installing coreutils-6.9-3.2 [ 10s] [72/106] installing libmount-2.20.2-3.1 [ 10s] [73/106] installing lzo-devel-2.03-3.2 [ 10s] [74/106] installing mpc-0.9-3.2 [ 10s] [75/106] installing perl-devel-5.12.1-3.3 [ 10s] [76/106] installing xz-lzma-compat-5.0.3-3.2 [ 10s] [77/106] installing cloog-ppl-0.16.1-3.3 [ 10s] [78/106] installing nss-sysinit-3.12.9-3.14 [ 10s] [79/106] installing ppl-pwl-0.11.2-3.2 [ 11s] [80/106] installing elfutils-0.152-3.10 [ 11s] [81/106] installing eglibc-common-2.13-3.8 [ 11s] [82/106] installing rpm-libs-4.9.1-5.1 [ 11s] [83/106] installing perl-ExtUtils-CBuilder-0.21-3.3 [ 11s] [84/106] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 11s] [85/106] installing perl-Pod-Simple-3.07-3.3 [ 11s] [86/106] installing perl-Test-Simple-0.80-3.3 [ 11s] [87/106] installing gawk-3.1.5-3.4 [ 11s] [88/106] installing gzip-1.3.12-3.1 [ 11s] [89/106] installing perl-IO-Compress-Zlib-2.008-3.3 [ 11s] [90/106] installing perl-Test-Harness-3.12-3.3 [ 11s] [91/106] installing rpm-4.9.1-5.1 [ 11s] [92/106] installing build-2011.01.10a-3.1 [ 11s] [93/106] installing util-linux-2.20.2-3.1 [ 11s] [94/106] installing cpp-4.6.4-3.7 [ 12s] [95/106] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 12s] [96/106] installing perl-Compress-Zlib-2.008-3.3 [ 12s] [97/106] installing gcc-4.6.4-3.7 [ 12s] [98/106] installing rpm-build-4.9.1-5.1 [ 12s] [99/106] installing perl-IO-Zlib-1.07-3.3 [ 12s] [100/106] installing perl-CPAN-1.9205-3.3 [ 12s] [101/106] installing autoconf-2.68-3.1 [ 12s] [102/106] installing gcc-c++-4.6.4-3.7 [ 12s] [103/106] installing automake-1.11.1-3.1 [ 12s] [104/106] installing perl-Archive-Tar-1.38-3.3 [ 12s] [105/106] installing libtool-2.2.6b-3.2 [ 12s] [106/106] installing perl-Module-Build-0.2808-3.3 [ 12s] removing nis flags from //etc/nsswitch.conf... [ 12s] now finalizing build dir... [ 12s] /.build/build: line 2585: mount: command not found [ 12s] /.build/build: line 2586: mount: command not found [ 13s] Warning: spec file parser line 12: can't expand %(...) [ 13s] Warning: spec file parser line 19: can't expand %(...) [ 13s] ----------------------------------------------------------------- [ 13s] I have the following modifications for perl-Test-Pod.spec: [ 13s] 5c5 [ 13s] < Release: 1 [ 13s] --- [ 13s] > Release: 3.1 [ 13s] 55a56 [ 13s] > %changelog [ 13s] ----------------------------------------------------------------- [ 13s] ----- building perl-Test-Pod.spec (user abuild) [ 13s] ----------------------------------------------------------------- [ 13s] ----------------------------------------------------------------- [ 13s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/emulator/46d6215a50a425176faacf264a062ea0-perl-Test-Pod' /home/abuild/rpmbuild/SOURCES/perl-Test-Pod.spec [ 13s] sh: @__ID_U@: command not found [ 13s] sh: @__ID_U@: command not found [ 13s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pjYVrX [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + rm -rf Test-Pod-1.42 [ 13s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-1.42.tar.gz [ 13s] + /bin/tar -xf - [ 13s] + STATUS=0 [ 13s] + '[' 0 -ne 0 ']' [ 13s] + cd Test-Pod-1.42 [ 13s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 13s] + exit 0 [ 13s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.TKUo4D [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd Test-Pod-1.42 [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 13s] + export CFLAGS [ 13s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 13s] + export CXXFLAGS [ 13s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 13s] + export FFLAGS [ 13s] + LD_AS_NEEDED=1 [ 13s] + export LD_AS_NEEDED [ 13s] + /usr/bin/perl Build.PL --installdirs vendor [ 13s] Creating new 'MYMETA.yml' with configuration results [ 13s] Creating new 'Build' script for 'Test-Pod' version '1.42' [ 13s] + ./Build [ 13s] Building Test-Pod [ 13s] + exit 0 [ 13s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.9wG2Sl [ 13s] + umask 022 [ 13s] + cd /home/abuild/rpmbuild/BUILD [ 13s] + cd Test-Pod-1.42 [ 13s] + LANG=C [ 13s] + export LANG [ 13s] + unset DISPLAY [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 13s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 13s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 13s] + ./Build install destdir=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 create_packlist=0 [ 14s] Building Test-Pod [ 14s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386/usr/lib/perl5/vendor_perl/5.12.1/Test/Pod.pm [ 14s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386/usr/share/man/man3/Test::Pod.3pm [ 14s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 -type f -name .packlist -exec rm -f '{}' ';' [ 14s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 -type d -depth -exec rmdir '{}' ';' [ 14s] + chmod -R u+w /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386/usr [ 14s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/Test-Pod-1.42 [ 14s] + /usr/lib/rpm/check-buildroot [ 14s] + /usr/lib/rpm//brp-compress [ 14s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 14s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 14s] + /usr/lib/rpm/brp-python-hardlink [ 14s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 14s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.L4WiB4 [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd Test-Pod-1.42 [ 14s] + unset DISPLAY [ 14s] + LC_ALL=C [ 14s] + ./Build test [ 14s] # Testing Test::Pod 1.42, Perl 5.012001, /usr/bin/perl [ 14s] # Using Pod::Simple 3.14 [ 14s] t/00-load.t ............ ok [ 14s] t/all_pod_files.t ...... ok [ 14s] t/cut-outside-block.t .. ok [ 14s] t/good.t ............... ok [ 14s] t/item-ordering.t ...... ok [ 14s] t/load.t ............... ok [ 14s] t/missing-file.t ....... ok [ 14s] t/pod.t ................ ok [ 14s] t/selftest.t ........... ok [ 14s] t/spaced-directives.t .. skipped: Not written yet [ 14s] t/unknown-directive.t .. ok [ 14s] All tests successful. [ 14s] Files=11, Tests=20, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.38 cusr 0.02 csys = 0.44 CPU) [ 14s] Result: PASS [ 14s] + exit 0 [ 14s] Processing files: perl-Test-Pod-1.42-3.1.noarch [ 14s] Provides: perl(Test::Pod) = 1.42 [ 14s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 14s] Requires: perl >= 0:5.008 perl(File::Spec) perl(Pod::Simple) perl(Test::Builder) perl(strict) [ 14s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 14s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-1.42-3.1.src.rpm [ 14s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-1.42-3.1.noarch.rpm [ 14s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.UjtPam [ 14s] + umask 022 [ 14s] + cd /home/abuild/rpmbuild/BUILD [ 14s] + cd Test-Pod-1.42 [ 14s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 14s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.42-3.1.i386 [ 14s] + exit 0 [ 14s] ... checking for files with abuild user/group [ 14s] ... creating baselibs [ 14s] ... saving built statistics [ 14s] /.build/build: line 3144: mount: command not found [ 14s] ERROR: no root disk device found, yet another new device name? [ 14s] ls: cannot access /sys/block/: No such file or directory [ 14s] /.build/build: line 3159: umount: command not found [ 14s] ... saving built packages [ 15s] /home/abuild/rpmbuild/RPMS/noarch/perl-Test-Pod-1.42-3.1.noarch.rpm [ 15s] /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-1.42-3.1.src.rpm [ 15s] /home/abuild/rpmbuild/OTHER/_statistics [ 15s] [ 15s] w25 finished "build perl-Test-Pod.spec" at Tue Feb 3 05:44:59 UTC 2015. [ 15s] [ 18s] /.build/build: line 368: 213 Killed background_monitor_process [ 20s] [ 15.907760] SysRq : Power Off [ 20s] [ 15.915624] Power down. [ 24s] build: extracting built packages... [ 24s] perl-Test-Pod-1.42-3.1.noarch.rpm [ 24s] perl-Test-Pod-1.42-3.1.src.rpm [ 24s] _statistics Retried build at Tue Feb 3 02:01:33 2015 returned same result, skipped