[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w15 started "build _service:gbs:xorg-x11-utils.spec" at Tue Feb 3 05:53:28 UTC 2015. [ 0s] [ 0s] Building xorg-x11-utils for project 'Tizen:2.3:Wearable' repository 'emulator' arch 'i586' srcmd5 'c3428952408b87ea9a2eca764d77b04d' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-utils.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-utils.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-utils.spec build rpmlint-Factory ... [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl [ 1s] breaking dependency libacl -> eglibc [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> libacl -> libattr [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: eglibc -> libgcc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: rpm -> rpm-libs [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/31] preinstalling tizen-release... [ 1s] [2/31] preinstalling libgcc... [ 1s] [3/31] preinstalling setup... [ 1s] [4/31] preinstalling filesystem... [ 1s] [5/31] preinstalling eglibc... [ 1s] [6/31] preinstalling bzip2-libs... [ 1s] [7/31] preinstalling elfutils-libelf... [ 1s] [8/31] preinstalling libattr... [ 1s] [9/31] preinstalling liblua... [ 1s] [10/31] preinstalling ncurses-libs... [ 1s] [11/31] preinstalling nspr... [ 1s] [12/31] preinstalling nss-softokn-freebl... [ 1s] [13/31] preinstalling popt... [ 1s] [14/31] preinstalling readline... [ 1s] [15/31] preinstalling sed... [ 1s] [16/31] preinstalling sqlite... [ 1s] [17/31] preinstalling tar... [ 1s] [18/31] preinstalling xz-libs... [ 1s] [19/31] preinstalling zlib... [ 1s] [20/31] preinstalling bash... [ 1s] [21/31] preinstalling diffutils... [ 1s] [22/31] preinstalling libstdc++... [ 1s] [23/31] preinstalling eglibc-common... [ 1s] [24/31] preinstalling libacl... [ 1s] [25/31] preinstalling libcap... [ 1s] [26/31] preinstalling libfile... [ 1s] [27/31] preinstalling bzip2... [ 1s] [28/31] preinstalling nss... [ 1s] [29/31] preinstalling coreutils... [ 1s] [30/31] preinstalling rpm-libs... [ 2s] [31/31] preinstalling rpm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: ppl -> ppl-pwl [ 3s] breaking dependency ppl -> ppl-pwl [ 3s] cycle: nss-sysinit -> nss [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: rpm -> rpm-libs [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 9s] booting kvm ... [ 9s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 19s] Waiting for device /dev/vda to appear: ok [ 19s] fsck from util-linux 2.21.2 [ 19s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 19s] /dev/vda: clean, 4159/2392064 files, 188691/9568256 blocks [ 19s] fsck succeeded. Mounting root device read-write. [ 19s] Mounting root /dev/vda [ 19s] mount -o rw -t ext4 /dev/vda /root [ 19s] replacing /etc/mtab with symlink to /proc/self/mounts [ 20s] 2nd stage started in virtual machine [ 20s] machine type: x86_64 [ 20s] switching personality to 8... [ 20s] 2nd stage started in virtual machine [ 20s] machine type: i686 [ 20s] /.build/build: line 770: mount: command not found [ 20s] swapon on /dev/vdb [ 20s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 20s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 20s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 20s] logging output to //.build.log... [ 20s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-utils.spec ... [ 20s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-utils.spec build rpmlint-Factory ... [ 20s] initializing rpm db... [ 20s] [1/160] installing cloog-0.16.1-3.3 [ 20s] [2/160] installing kernel-headers-3.0.15-2.1 [ 20s] [3/160] installing libX11-common-1.5.0-3.1 [ 20s] [4/160] installing tizen-release-2.2.0-3.1 [ 20s] [5/160] installing tzdata-2013h-3.1 [ 21s] [6/160] installing libgcc-4.6.4-3.7 [ 21s] [7/160] installing setup-0.1-3.1 [ 21s] [8/160] installing filesystem-0.1-3.1 [ 21s] warning: group lock does not exist - using root [ 21s] [9/160] installing eglibc-2.13-3.8 [ 21s] [10/160] installing libstdc++-4.6.4-3.7 [ 21s] [11/160] installing bzip2-libs-1.0.5-3.2 [ 21s] [12/160] installing cpio-2.8-3.1 [ 21s] [13/160] installing e2fsprogs-libs-1.41.9-3.1 [ 21s] [14/160] installing elfutils-libelf-0.152-3.10 [ 21s] [15/160] installing expat-2.0.1-3.2 [ 21s] [16/160] installing findutils-4.2.31-3.1 [ 21s] [17/160] installing gdbm-1.8.3-3.2 [ 21s] [18/160] installing libICE-1.0.8-3.1 [ 21s] [19/160] installing libXau-1.0.7-3.1 [ 21s] [20/160] installing libattr-2.4.44-3.2 [ 21s] [21/160] installing liblua-5.1.4-3.2 [ 21s] [22/160] installing libstdc++-devel-4.6.4-3.7 [ 21s] [23/160] installing libuuid-2.20.2-3.1 [ 21s] [24/160] installing lzo-2.03-3.2 [ 22s] [25/160] installing m4-1.4.14-3.1 [ 22s] [26/160] installing net-tools-1.60-3.2 [ 22s] [27/160] installing nspr-4.9-3.6 [ 22s] [28/160] installing nss-softokn-freebl-3.12.9-3.14 [ 22s] [29/160] installing pkgconfig-0.25-3.1 [ 22s] [30/160] installing popt-1.16-3.2 [ 22s] [31/160] installing readline-5.2-3.2 [ 22s] [32/160] installing sed-4.1.5-3.1 [ 22s] [33/160] installing smack-1.0+s14-3.2 [ 22s] [34/160] installing sqlite-3.7.13-3.2 [ 22s] [35/160] installing tar-1.17-3.1 [ 22s] [36/160] installing xz-libs-5.0.3-3.2 [ 22s] [37/160] installing zlib-1.2.5-3.10 [ 22s] [38/160] installing bash-4.1-3.1 [ 22s] [39/160] installing diffutils-3.0-3.1 [ 22s] [40/160] installing libgomp-4.6.4-3.7 [ 22s] [41/160] installing patch-2.6-3.1 [ 22s] [42/160] installing gmp-4.2.1-3.2 [ 22s] [43/160] installing libpcre-7.7-3.2 [ 22s] [44/160] installing ncurses-libs-5.7-3.2 [ 22s] [45/160] installing build-compare-2009.10.14-3.3 [ 22s] [46/160] installing libpthread-stubs-0.3-3.1 [ 22s] [47/160] installing xorg-x11-proto-core-7.0.25-3.1 [ 23s] [48/160] installing xorg-x11-proto-dmx-2.3.1-3.1 [ 23s] [49/160] installing xorg-x11-proto-input-2.2-3.1 [ 23s] [50/160] installing xorg-x11-proto-kb-1.0.6-3.1 [ 23s] [51/160] installing xorg-x11-proto-randr-1.4-3.1 [ 23s] [52/160] installing xorg-x11-proto-record-1.14.2-3.1 [ 23s] [53/160] installing xorg-x11-proto-renderproto-0.11.1-3.1 [ 23s] [54/160] installing xorg-x11-proto-video-2.3.1-3.1 [ 23s] [55/160] installing xorg-x11-proto-xext-7.2.1-3.1 [ 23s] [56/160] installing xorg-x11-proto-xf86dga-2.1-3.1 [ 23s] [57/160] installing xorg-x11-proto-xf86vidmode-2.3.1-3.1 [ 23s] [58/160] installing xorg-x11-proto-xinerama-1.2.1-3.1 [ 23s] [59/160] installing xorg-x11-xutils-dev-7.7-3.1 [ 23s] [60/160] installing eglibc-headers-2.13-3.8 [ 23s] [61/160] installing freetype-2.4.9-3.1 [ 23s] [62/160] installing grep-2.5.1a-3.1 [ 23s] [63/160] installing libacl-2.2.49-3.1 [ 23s] [64/160] installing libcap-2.21-3.2 [ 24s] [65/160] installing libfile-5.04-3.2 [ 24s] [66/160] installing libxcb-1.8.1-3.1 [ 24s] [67/160] installing lzo-minilzo-2.03-3.2 [ 24s] [68/160] installing make-3.82-3.1 [ 24s] [69/160] installing mpfr-3.0.0-3.2 [ 24s] [70/160] installing ncurses-5.7-3.2 [ 24s] [71/160] installing unzip-6.0-3.4 [ 24s] [72/160] installing zlib-devel-1.2.5-3.10 [ 24s] [73/160] installing bzip2-1.0.5-3.2 [ 24s] [74/160] installing libSM-1.2.1-3.1 [ 24s] [75/160] installing libblkid-2.20.2-3.1 [ 24s] [76/160] installing xz-5.0.3-3.2 [ 24s] [77/160] installing smack-utils-1.0+s14-3.2 [ 24s] [78/160] installing binutils-2.22-3.5 [ 24s] [79/160] installing elfutils-libs-0.152-3.10 [ 24s] [80/160] installing ppl-0.11.2-3.2 [ 25s] [81/160] installing nss-3.12.9-3.14 [ 25s] [82/160] installing perl-5.12.1-3.3 [ 30s] [83/160] installing ncurses-base-5.7-3.2 [ 30s] [84/160] installing perl-HTML-Tagset-3.20-3.1 [ 30s] [85/160] installing perl-IO-Compress-Base-2.008-3.3 [ 30s] [86/160] installing perl-Module-Pluggable-3.60-3.3 [ 31s] [87/160] installing perl-Pod-Escapes-1.04-3.3 [ 31s] [88/160] installing perl-TimeDate-1.20-3.1 [ 31s] [89/160] installing eglibc-devel-2.13-3.8 [ 31s] [90/160] installing file-5.04-3.2 [ 31s] [91/160] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 31s] [92/160] installing perl-libs-5.12.1-3.3 [ 31s] [93/160] installing xcb-util-0.3.8-3.1 [ 31s] [94/160] installing coreutils-6.9-3.2 [ 32s] [95/160] installing libICE-devel-1.0.8-3.1 [ 32s] [96/160] installing libXau-devel-1.0.7-3.1 [ 32s] [97/160] installing libmount-2.20.2-3.1 [ 32s] [98/160] installing lzo-devel-2.03-3.2 [ 32s] [99/160] installing mpc-0.9-3.2 [ 32s] [100/160] installing perl-devel-5.12.1-3.3 [ 32s] [101/160] installing xz-lzma-compat-5.0.3-3.2 [ 32s] [102/160] installing cloog-ppl-0.16.1-3.3 [ 32s] [103/160] installing freetype-devel-2.4.9-3.1 [ 33s] [104/160] installing libX11-1.5.0-3.1 [ 33s] [105/160] installing nss-sysinit-3.12.9-3.14 [ 33s] [106/160] installing ppl-pwl-0.11.2-3.2 [ 33s] [107/160] installing elfutils-0.152-3.10 [ 33s] [108/160] installing eglibc-common-2.13-3.8 [ 37s] [109/160] installing rpm-libs-4.9.1-5.1 [ 37s] [110/160] installing libXext-1.3.1-3.1 [ 38s] [111/160] installing libXrender-0.9.7-3.1 [ 38s] [112/160] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 39s] [113/160] installing perl-Pod-Simple-3.07-3.3 [ 40s] [114/160] installing perl-Test-Simple-0.80-3.3 [ 41s] [115/160] installing gawk-3.1.5-3.4 [ 41s] [116/160] installing gzip-1.3.12-3.1 [ 42s] [117/160] installing perl-IO-Compress-Zlib-2.008-3.3 [ 43s] [118/160] installing perl-Test-Harness-3.12-3.3 [ 44s] [119/160] installing libSM-devel-1.2.1-3.1 [ 44s] [120/160] installing libXt-1.1.2-3.1 [ 44s] [121/160] installing libxcb-devel-1.8.1-3.1 [ 44s] [122/160] installing rpm-4.9.1-5.1 [ 56s] [123/160] installing build-2011.01.10a-3.1 [ 56s] [124/160] installing fontconfig-2.9.0-3.1 [ 59s] /opt/var/cache/fontconfig/*: No such file or directory [ 59s] [125/160] installing util-linux-2.20.2-3.1 [ 59s] [126/160] installing cpp-4.6.4-3.7 [ 60s] [127/160] installing fontconfig-devel-2.9.0-3.1 [ 60s] [128/160] installing libXi-1.6.1-3.1 [ 61s] [129/160] installing libXinerama-1.1.2-3.1 [ 61s] [130/160] installing libXtst-1.2.0-3.1 [ 61s] [131/160] installing libXv-1.0.7-3.1 [ 61s] [132/160] installing libXxf86dga-1.1.3-3.1 [ 62s] [133/160] installing libXxf86vm-1.1.2-3.1 [ 63s] [134/160] installing libdmx-1.1.2-3.1 [ 66s] [135/160] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 69s] [136/160] installing xcb-util-devel-0.3.8-3.1 [ 70s] [137/160] installing libXmu-1.1.1-3.1 [ 70s] [138/160] installing libXrandr-1.4.0-3.1 [ 71s] [139/160] installing libX11-devel-1.5.0-3.1 [ 71s] [140/160] installing libXft-2.3.1-3.1 [ 72s] [141/160] installing gcc-4.6.4-3.7 [ 75s] [142/160] installing rpm-build-4.9.1-5.1 [ 75s] [143/160] installing perl-CPAN-1.9205-3.3 [ 76s] [144/160] installing libXext-devel-1.3.1-3.1 [ 77s] [145/160] installing libXrender-devel-0.9.7-3.1 [ 77s] [146/160] installing autoconf-2.68-3.1 [ 78s] [147/160] installing libXt-devel-1.1.2-3.1 [ 78s] [148/160] installing gcc-c++-4.6.4-3.7 [ 80s] [149/160] installing automake-1.11.1-3.1 [ 81s] [150/160] installing libXinerama-devel-1.1.2-3.1 [ 81s] [151/160] installing libXxf86dga-devel-1.1.3-3.1 [ 82s] [152/160] installing libXxf86vm-devel-1.1.2-3.1 [ 82s] [153/160] installing libdmx-devel-1.1.2-3.1 [ 83s] [154/160] installing libXft-devel-2.3.1-3.1 [ 84s] [155/160] installing libXmu-devel-1.1.1-3.1 [ 84s] [156/160] installing libXv-devel-1.0.7-3.1 [ 86s] [157/160] installing libXi-devel-1.6.1-3.1 [ 86s] [158/160] installing libXrandr-devel-1.4.0-3.1 [ 87s] [159/160] installing libtool-2.2.6b-3.2 [ 88s] [160/160] installing libXtst-devel-1.2.0-3.1 [ 88s] removing nis flags from //etc/nsswitch.conf... [ 88s] now finalizing build dir... [ 88s] /.build/build: line 2585: mount: command not found [ 88s] /.build/build: line 2586: mount: command not found [ 93s] ----------------------------------------------------------------- [ 93s] I have the following modifications for xorg-x11-utils.spec: [ 93s] 7c7 [ 93s] < Release: 6 [ 93s] --- [ 93s] > Release: 3.1 [ 93s] ----------------------------------------------------------------- [ 93s] ----- building xorg-x11-utils.spec (user abuild) [ 93s] ----------------------------------------------------------------- [ 93s] ----------------------------------------------------------------- [ 93s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/emulator/c3428952408b87ea9a2eca764d77b04d-xorg-x11-utils' /home/abuild/rpmbuild/SOURCES/xorg-x11-utils.spec [ 93s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.pK12Rr [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + LANG=C [ 93s] + export LANG [ 93s] + unset DISPLAY [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + rm -rf xorg-x11-utils-7.5.1 [ 93s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-utils-7.5.1.tar.gz [ 93s] + /bin/tar -xf - [ 93s] + STATUS=0 [ 93s] + '[' 0 -ne 0 ']' [ 93s] + cd xorg-x11-utils-7.5.1 [ 93s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 93s] + exit 0 [ 93s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KHvCYA [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + cd xorg-x11-utils-7.5.1 [ 93s] + LANG=C [ 93s] + export LANG [ 93s] + unset DISPLAY [ 93s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 93s] + export CXXFLAGS [ 93s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 93s] + export FFLAGS [ 93s] + LD_AS_NEEDED=1 [ 93s] + export LD_AS_NEEDED [ 93s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 93s] + pushd xdpyinfo [ 93s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 93s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 93s] + export CXXFLAGS [ 93s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 93s] + export FFLAGS [ 93s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 93s] configure: WARNING: unrecognized options: --disable-xprint [ 94s] checking for a BSD-compatible install... /usr/bin/install -c [ 95s] checking whether build environment is sane... yes [ 95s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 95s] checking for gawk... gawk [ 95s] checking whether make sets $(MAKE)... yes [ 95s] checking whether to enable maintainer-specific portions of Makefiles... no [ 95s] checking for style of include used by make... GNU [ 95s] checking for i686-pc-linux-gnu-gcc... no [ 95s] checking for gcc... gcc [ 95s] checking whether the C compiler works... yes [ 95s] checking for C compiler default output file name... a.out [ 95s] checking for suffix of executables... [ 95s] checking whether we are cross compiling... no [ 95s] checking for suffix of object files... o [ 95s] checking whether we are using the GNU C compiler... yes [ 95s] checking whether gcc accepts -g... yes [ 95s] checking for gcc option to accept ISO C89... none needed [ 95s] checking dependency style of gcc... gcc3 [ 95s] checking for gcc option to accept ISO C99... -std=gnu99 [ 96s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 96s] checking for grep that handles long lines and -e... /bin/grep [ 96s] checking for egrep... /bin/grep -E [ 96s] checking for ANSI C header files... yes [ 96s] checking for sys/types.h... yes [ 96s] checking for sys/stat.h... yes [ 96s] checking for stdlib.h... yes [ 96s] checking for string.h... yes [ 96s] checking for memory.h... yes [ 96s] checking for strings.h... yes [ 96s] checking for inttypes.h... yes [ 96s] checking for stdint.h... yes [ 96s] checking for unistd.h... yes [ 96s] checking whether __clang__ is declared... no [ 96s] checking whether __INTEL_COMPILER is declared... no [ 96s] checking whether __SUNPRO_C is declared... no [ 96s] checking for i686-pc-linux-gnu-pkg-config... no [ 96s] checking for pkg-config... /usr/bin/pkg-config [ 96s] checking pkg-config is at least version 0.9.0... yes [ 96s] checking build system type... i686-pc-linux-gnu [ 96s] checking host system type... i686-pc-linux-gnu [ 96s] checking for a sed that does not truncate output... /bin/sed [ 96s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 96s] checking for XDPYINFO... yes [ 96s] checking for DPY_X11... yes [ 96s] checking for DPY_XEXT... yes [ 96s] checking for X11/extensions/multibuf.h... yes [ 96s] checking for X11/extensions/XShm.h... yes [ 96s] checking for DPY_XKB... yes [ 96s] checking for X11/extensions/XKB.h... yes [ 96s] checking for X11/XKBlib.h... yes [ 96s] checking for DPY_XF86VIDMODE... yes [ 96s] checking for X11/extensions/xf86vmode.h... yes [ 96s] checking for X11/extensions/xf86vmstr.h... yes [ 96s] checking for X11/extensions/xf86vmproto.h... yes [ 96s] checking for DPY_XF86DGA... yes [ 96s] checking for X11/extensions/Xxf86dga.h... yes [ 96s] checking for X11/extensions/xf86dgaproto.h... yes [ 96s] checking for X11/extensions/xf86dga.h... yes [ 96s] checking for X11/extensions/xf86dgastr.h... yes [ 96s] checking for DPY_XF86MISC... no [ 96s] not found [ 96s] checking for DPY_XINPUT... yes [ 96s] checking for X11/extensions/XInput.h... yes [ 96s] checking for DPY_XRENDER... yes [ 96s] checking for X11/extensions/Xrender.h... yes [ 96s] checking for DPY_XCOMPOSITE... no [ 96s] not found [ 97s] checking for DPY_XINERAMA... yes [ 97s] checking for X11/extensions/Xinerama.h... yes [ 97s] checking for DPY_DMX... yes [ 97s] checking for X11/extensions/dmxext.h... yes [ 97s] checking for DPY_XTST... yes [ 97s] checking for X11/extensions/record.h... yes [ 97s] configure: creating ./config.status [ 97s] config.status: creating Makefile [ 97s] config.status: creating man/Makefile [ 97s] config.status: creating config.h [ 97s] config.status: executing depfiles commands [ 97s] configure: WARNING: unrecognized options: --disable-xprint [ 97s] + popd [ 97s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 97s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 97s] + pushd xev [ 97s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 97s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 97s] + export CFLAGS [ 97s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 97s] + export CXXFLAGS [ 97s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 97s] + export FFLAGS [ 97s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 97s] configure: WARNING: unrecognized options: --disable-xprint [ 97s] checking for a BSD-compatible install... /usr/bin/install -c [ 98s] checking whether build environment is sane... yes [ 98s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 98s] checking for gawk... gawk [ 98s] checking whether make sets $(MAKE)... yes [ 98s] checking whether to enable maintainer-specific portions of Makefiles... no [ 98s] checking for style of include used by make... GNU [ 98s] checking for i686-pc-linux-gnu-gcc... no [ 98s] checking for gcc... gcc [ 98s] checking whether the C compiler works... yes [ 98s] checking for C compiler default output file name... a.out [ 98s] checking for suffix of executables... [ 98s] checking whether we are cross compiling... no [ 98s] checking for suffix of object files... o [ 98s] checking whether we are using the GNU C compiler... yes [ 98s] checking whether gcc accepts -g... yes [ 98s] checking for gcc option to accept ISO C89... none needed [ 98s] checking dependency style of gcc... gcc3 [ 98s] checking for gcc option to accept ISO C99... -std=gnu99 [ 98s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 98s] checking for grep that handles long lines and -e... /bin/grep [ 98s] checking for egrep... /bin/grep -E [ 98s] checking for ANSI C header files... yes [ 98s] checking for sys/types.h... yes [ 98s] checking for sys/stat.h... yes [ 98s] checking for stdlib.h... yes [ 98s] checking for string.h... yes [ 98s] checking for memory.h... yes [ 98s] checking for strings.h... yes [ 99s] checking for inttypes.h... yes [ 99s] checking for stdint.h... yes [ 99s] checking for unistd.h... yes [ 99s] checking whether __clang__ is declared... no [ 99s] checking whether __INTEL_COMPILER is declared... no [ 99s] checking whether __SUNPRO_C is declared... no [ 99s] checking for i686-pc-linux-gnu-pkg-config... no [ 99s] checking for pkg-config... /usr/bin/pkg-config [ 99s] checking pkg-config is at least version 0.9.0... yes [ 99s] checking build system type... i686-pc-linux-gnu [ 99s] checking host system type... i686-pc-linux-gnu [ 99s] checking for a sed that does not truncate output... /bin/sed [ 99s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 99s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 99s] checking if gcc -std=gnu99 supports -Wall... yes [ 99s] checking if gcc -std=gnu99 supports -Wpointer-arith... yes [ 99s] checking if gcc -std=gnu99 supports -Wstrict-prototypes... yes [ 99s] checking if gcc -std=gnu99 supports -Wmissing-prototypes... yes [ 99s] checking if gcc -std=gnu99 supports -Wmissing-declarations... yes [ 99s] checking if gcc -std=gnu99 supports -Wnested-externs... yes [ 99s] checking if gcc -std=gnu99 supports -Wbad-function-cast... yes [ 99s] checking if gcc -std=gnu99 supports -Wformat=2... yes [ 99s] checking if gcc -std=gnu99 supports -Wold-style-definition... yes [ 99s] checking if gcc -std=gnu99 supports -Wdeclaration-after-statement... yes [ 99s] checking if gcc -std=gnu99 supports -Wunused... yes [ 99s] checking if gcc -std=gnu99 supports -Wuninitialized... yes [ 99s] checking if gcc -std=gnu99 supports -Wshadow... yes [ 99s] checking if gcc -std=gnu99 supports -Wcast-qual... yes [ 99s] checking if gcc -std=gnu99 supports -Wmissing-noreturn... yes [ 99s] checking if gcc -std=gnu99 supports -Wmissing-format-attribute... yes [ 99s] checking if gcc -std=gnu99 supports -Wredundant-decls... yes [ 99s] checking if gcc -std=gnu99 supports -Werror=implicit... yes [ 99s] checking if gcc -std=gnu99 supports -Werror=nonnull... yes [ 99s] checking if gcc -std=gnu99 supports -Werror=init-self... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=main... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=missing-braces... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=sequence-point... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=return-type... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=trigraphs... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=array-bounds... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=write-strings... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=address... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=int-to-pointer-cast... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=pointer-to-int-cast... yes [ 100s] checking if gcc -std=gnu99 supports -pedantic... yes [ 100s] checking if gcc -std=gnu99 supports -Werror... yes [ 100s] checking if gcc -std=gnu99 supports -Werror=attributes... yes [ 100s] checking for XEV... yes [ 100s] configure: creating ./config.status [ 100s] config.status: creating Makefile [ 100s] config.status: creating man/Makefile [ 100s] config.status: creating config.h [ 100s] config.status: executing depfiles commands [ 100s] configure: WARNING: unrecognized options: --disable-xprint [ 100s] + popd [ 100s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 100s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 100s] + pushd xprop [ 100s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 100s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 100s] + export CFLAGS [ 100s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 100s] + export CXXFLAGS [ 100s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 100s] + export FFLAGS [ 100s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 100s] configure: WARNING: unrecognized options: --disable-xprint [ 100s] checking for a BSD-compatible install... /usr/bin/install -c [ 101s] checking whether build environment is sane... yes [ 101s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 101s] checking for gawk... gawk [ 101s] checking whether make sets $(MAKE)... yes [ 101s] checking whether to enable maintainer-specific portions of Makefiles... no [ 101s] checking for style of include used by make... GNU [ 101s] checking for i686-pc-linux-gnu-gcc... no [ 101s] checking for gcc... gcc [ 101s] checking whether the C compiler works... yes [ 101s] checking for C compiler default output file name... a.out [ 101s] checking for suffix of executables... [ 101s] checking whether we are cross compiling... no [ 101s] checking for suffix of object files... o [ 101s] checking whether we are using the GNU C compiler... yes [ 101s] checking whether gcc accepts -g... yes [ 101s] checking for gcc option to accept ISO C89... none needed [ 101s] checking dependency style of gcc... gcc3 [ 102s] checking for gcc option to accept ISO C99... -std=gnu99 [ 102s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 102s] checking for grep that handles long lines and -e... /bin/grep [ 102s] checking for egrep... /bin/grep -E [ 102s] checking for ANSI C header files... yes [ 102s] checking for sys/types.h... yes [ 102s] checking for sys/stat.h... yes [ 102s] checking for stdlib.h... yes [ 102s] checking for string.h... yes [ 102s] checking for memory.h... yes [ 102s] checking for strings.h... yes [ 102s] checking for inttypes.h... yes [ 102s] checking for stdint.h... yes [ 102s] checking for unistd.h... yes [ 102s] checking whether __clang__ is declared... no [ 102s] checking whether __INTEL_COMPILER is declared... no [ 102s] checking whether __SUNPRO_C is declared... no [ 102s] checking for i686-pc-linux-gnu-pkg-config... no [ 102s] checking for pkg-config... /usr/bin/pkg-config [ 102s] checking pkg-config is at least version 0.9.0... yes [ 102s] checking build system type... i686-pc-linux-gnu [ 102s] checking host system type... i686-pc-linux-gnu [ 102s] checking for a sed that does not truncate output... /bin/sed [ 102s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 102s] checking wchar.h usability... yes [ 102s] checking wchar.h presence... yes [ 102s] checking for wchar.h... yes [ 102s] checking wctype.h usability... yes [ 102s] checking wctype.h presence... yes [ 102s] checking for wctype.h... yes [ 102s] checking langinfo.h usability... yes [ 102s] checking langinfo.h presence... yes [ 102s] checking for langinfo.h... yes [ 102s] checking for XPROP... yes [ 102s] configure: creating ./config.status [ 102s] config.status: creating Makefile [ 102s] config.status: creating man/Makefile [ 102s] config.status: creating config.h [ 102s] config.status: executing depfiles commands [ 102s] configure: WARNING: unrecognized options: --disable-xprint [ 102s] + popd [ 102s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 102s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 102s] + pushd xvinfo [ 102s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 102s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 102s] + export CFLAGS [ 102s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 102s] + export CXXFLAGS [ 102s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 102s] + export FFLAGS [ 102s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 102s] configure: WARNING: unrecognized options: --disable-xprint [ 103s] checking for a BSD-compatible install... /usr/bin/install -c [ 104s] checking whether build environment is sane... yes [ 104s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 104s] checking for gawk... gawk [ 104s] checking whether make sets $(MAKE)... yes [ 104s] checking whether to enable maintainer-specific portions of Makefiles... no [ 104s] checking for style of include used by make... GNU [ 104s] checking for i686-pc-linux-gnu-gcc... no [ 104s] checking for gcc... gcc [ 104s] checking whether the C compiler works... yes [ 104s] checking for C compiler default output file name... a.out [ 104s] checking for suffix of executables... [ 104s] checking whether we are cross compiling... no [ 104s] checking for suffix of object files... o [ 104s] checking whether we are using the GNU C compiler... yes [ 104s] checking whether gcc accepts -g... yes [ 104s] checking for gcc option to accept ISO C89... none needed [ 104s] checking dependency style of gcc... gcc3 [ 104s] checking for gcc option to accept ISO C99... -std=gnu99 [ 104s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 104s] checking for grep that handles long lines and -e... /bin/grep [ 104s] checking for egrep... /bin/grep -E [ 104s] checking for ANSI C header files... yes [ 104s] checking for sys/types.h... yes [ 104s] checking for sys/stat.h... yes [ 104s] checking for stdlib.h... yes [ 104s] checking for string.h... yes [ 104s] checking for memory.h... yes [ 104s] checking for strings.h... yes [ 104s] checking for inttypes.h... yes [ 104s] checking for stdint.h... yes [ 104s] checking for unistd.h... yes [ 104s] checking for i686-pc-linux-gnu-pkg-config... no [ 104s] checking for pkg-config... /usr/bin/pkg-config [ 104s] checking pkg-config is at least version 0.9.0... yes [ 104s] checking build system type... i686-pc-linux-gnu [ 104s] checking host system type... i686-pc-linux-gnu [ 104s] checking for a sed that does not truncate output... /bin/sed [ 104s] checking for XVINFO... yes [ 104s] configure: creating ./config.status [ 104s] config.status: creating Makefile [ 104s] config.status: creating config.h [ 104s] config.status: executing depfiles commands [ 104s] configure: WARNING: unrecognized options: --disable-xprint [ 104s] + popd [ 104s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 104s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 104s] + pushd xwininfo [ 104s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 104s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 104s] + export CFLAGS [ 104s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer' [ 104s] + export CXXFLAGS [ 104s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -m32 -march=core2 -msse3 -mno-ssse3 -mfpmath=sse -mtune=generic -fasynchronous-unwind-tables -fno-omit-frame-pointer -I%_fmoddir' [ 104s] + export FFLAGS [ 104s] + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 104s] configure: WARNING: unrecognized options: --disable-xprint [ 105s] checking for a BSD-compatible install... /usr/bin/install -c [ 106s] checking whether build environment is sane... yes [ 106s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 106s] checking for gawk... gawk [ 106s] checking whether make sets $(MAKE)... yes [ 106s] checking whether to enable maintainer-specific portions of Makefiles... no [ 106s] checking for style of include used by make... GNU [ 106s] checking for i686-pc-linux-gnu-gcc... no [ 106s] checking for gcc... gcc [ 106s] checking whether the C compiler works... yes [ 106s] checking for C compiler default output file name... a.out [ 106s] checking for suffix of executables... [ 106s] checking whether we are cross compiling... no [ 106s] checking for suffix of object files... o [ 106s] checking whether we are using the GNU C compiler... yes [ 106s] checking whether gcc accepts -g... yes [ 106s] checking for gcc option to accept ISO C89... none needed [ 106s] checking dependency style of gcc... gcc3 [ 106s] checking how to run the C preprocessor... gcc -E [ 106s] checking for grep that handles long lines and -e... /bin/grep [ 106s] checking for egrep... /bin/grep -E [ 106s] checking for ANSI C header files... yes [ 106s] checking for sys/types.h... yes [ 106s] checking for sys/stat.h... yes [ 106s] checking for stdlib.h... yes [ 106s] checking for string.h... yes [ 106s] checking for memory.h... yes [ 106s] checking for strings.h... yes [ 106s] checking for inttypes.h... yes [ 106s] checking for stdint.h... yes [ 106s] checking for unistd.h... yes [ 106s] checking minix/config.h usability... no [ 106s] checking minix/config.h presence... no [ 106s] checking for minix/config.h... no [ 106s] checking whether it is safe to define __EXTENSIONS__... yes [ 106s] checking for gcc option to accept ISO C99... -std=gnu99 [ 106s] checking whether __clang__ is declared... no [ 106s] checking whether __INTEL_COMPILER is declared... no [ 106s] checking whether __SUNPRO_C is declared... no [ 106s] checking for i686-pc-linux-gnu-pkg-config... no [ 106s] checking for pkg-config... /usr/bin/pkg-config [ 106s] checking pkg-config is at least version 0.9.0... yes [ 106s] checking build system type... i686-pc-linux-gnu [ 106s] checking host system type... i686-pc-linux-gnu [ 106s] checking for a sed that does not truncate output... /bin/sed [ 106s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 106s] checking for strlcat... no [ 107s] checking for working strnlen... yes [ 107s] checking for library containing iconv... none required [ 107s] checking whether to use xcb-icccm library... no [ 107s] checking for XWININFO... yes [ 107s] checking for XLIB... yes [ 107s] configure: creating ./config.status [ 107s] config.status: creating Makefile [ 107s] config.status: creating man/Makefile [ 107s] config.status: creating config.h [ 107s] config.status: executing depfiles commands [ 107s] configure: WARNING: unrecognized options: --disable-xprint [ 107s] + popd [ 107s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 107s] + exit 0 [ 107s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.X4rezy [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd xorg-x11-utils-7.5.1 [ 107s] + LANG=C [ 107s] + export LANG [ 107s] + unset DISPLAY [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 107s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 107s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/license [ 107s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/license/xorg-x11-utils [ 107s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 107s] + pushd xdpyinfo [ 107s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 107s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 107s] Making install in man [ 107s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 107s] GEN xdpyinfo.1 [ 107s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 107s] make[2]: Nothing to be done for `install-exec-am'. [ 107s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1" [ 107s] /usr/bin/install -c -m 644 xdpyinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1' [ 107s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 107s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 107s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 107s] CC xdpyinfo.o [ 107s] CCLD xdpyinfo [ 107s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 107s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin" [ 107s] /usr/bin/install -c xdpyinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin' [ 107s] make[2]: Nothing to be done for `install-data-am'. [ 107s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 107s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 107s] + popd [ 107s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 107s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 107s] + pushd xev [ 107s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 107s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 107s] Making install in man [ 107s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 107s] GEN xev.1 [ 107s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 107s] make[2]: Nothing to be done for `install-exec-am'. [ 107s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1" [ 107s] /usr/bin/install -c -m 644 xev.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1' [ 107s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 107s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 107s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 107s] CC xev.o [ 108s] CCLD xev [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 108s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin" [ 108s] /usr/bin/install -c xev '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin' [ 108s] make[2]: Nothing to be done for `install-data-am'. [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 108s] + popd [ 108s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 108s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 108s] + pushd xprop [ 108s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 108s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 108s] Making install in man [ 108s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 108s] GEN xprop.1 [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 108s] make[2]: Nothing to be done for `install-exec-am'. [ 108s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1" [ 108s] /usr/bin/install -c -m 644 xprop.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1' [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 108s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 108s] CC dsimple.o [ 108s] CC clientwin.o [ 108s] CC xprop.o [ 108s] CCLD xprop [ 108s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 108s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin" [ 108s] /usr/bin/install -c xprop '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin' [ 108s] make[2]: Nothing to be done for `install-data-am'. [ 108s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 108s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 108s] + popd [ 108s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 108s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 108s] + pushd xvinfo [ 108s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 108s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 108s] CC xvinfo.o [ 108s] xvinfo.c: In function 'main': [ 108s] xvinfo.c:124:9: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 108s] CCLD xvinfo [ 109s] GEN xvinfo.1 [ 109s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo' [ 109s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin" [ 109s] /usr/bin/install -c xvinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin' [ 109s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1" [ 109s] /usr/bin/install -c -m 644 xvinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1' [ 109s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo' [ 109s] + popd [ 109s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 109s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 109s] + pushd xwininfo [ 109s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 109s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 109s] Making install in man [ 109s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 109s] GEN xwininfo.1 [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 109s] make[2]: Nothing to be done for `install-exec-am'. [ 109s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1" [ 109s] /usr/bin/install -c -m 644 xwininfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man/man1' [ 109s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 109s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 109s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 109s] CC clientwin.o [ 109s] CC dsimple.o [ 109s] CC xwininfo.o [ 109s] xwininfo.c: In function 'main': [ 109s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 109s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 109s] xwininfo.c: In function 'Display_Window_Id': [ 109s] xwininfo.c:797:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 109s] xwininfo.c: In function 'print_friendly_name': [ 109s] xwininfo.c:1970:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 109s] CCLD xwininfo [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 109s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin" [ 109s] /usr/bin/install -c xwininfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin' [ 109s] make[2]: Nothing to be done for `install-data-am'. [ 109s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 109s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 109s] + popd [ 109s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/info [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/doc [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/doc/xorg-x11-utils [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/gtk-doc [ 109s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/share/man [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 -regex '.*/man/man./.*.[0-9]' [ 109s] + xargs rm -f -- [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 -regex '.*/man/../man./.*.[0-9]' [ 109s] + xargs rm -f -- [ 109s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 -regex '.*/man/man./.*.[0-9]pm' [ 109s] + xargs rm -f -- [ 109s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin/xwininfo [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin/xev [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin/xdpyinfo [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin/xvinfo [ 109s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386/usr/bin/xprop [ 109s] 476 blocks [ 109s] + /usr/lib/rpm/check-buildroot [ 109s] + /usr/lib/rpm//brp-compress [ 109s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 109s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 109s] + /usr/lib/rpm/brp-python-hardlink [ 109s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 109s] Processing files: xorg-x11-utils-7.5.1-3.1.i586 [ 109s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 109s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0PgogICAgICAgIDxhc3Np [ 109s] Z24+CiAgICAgICAgICAgICAgICA8ZmlsZXN5c3RlbSBwYXRoPSIvdXNyL2Jpbi8q [ 109s] IiBsYWJlbD0iXyIgZXhlY19sYWJlbD0ibm9uZSIgLz4KICAgICAgICA8L2Fzc2ln [ 109s] bj4KPC9tYW5pZmVzdD4K [ 109s] [ 110s] Provides: edid-decode xdpyinfo xev xprop xvinfo xwininfo [ 110s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 110s] Requires: libX11-xcb.so.1 libX11.so.6 libXext.so.6 libXi.so.6 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXtst.so.6 libXv.so.1 libXxf86dga.so.1 libXxf86vm.so.1 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdmx.so.1 libxcb-shape.so.0 libxcb.so.1 [ 110s] Processing files: xorg-x11-utils-debuginfo-7.5.1-3.1.i586 [ 110s] Processing files: xorg-x11-utils-debugsource-7.5.1-3.1.i586 [ 110s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 110s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5.1-3.1.src.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-7.5.1-3.1.i586.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-debuginfo-7.5.1-3.1.i586.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-debugsource-7.5.1-3.1.i586.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ONurUe [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd xorg-x11-utils-7.5.1 [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.i386 [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 110s] ... saving built statistics [ 110s] /.build/build: line 3144: mount: command not found [ 110s] ERROR: no root disk device found, yet another new device name? [ 110s] ls: cannot access /sys/block/: No such file or directory [ 110s] /.build/build: line 3159: umount: command not found [ 110s] ... saving built packages [ 110s] /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-7.5.1-3.1.i586.rpm [ 110s] /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-debuginfo-7.5.1-3.1.i586.rpm [ 110s] /home/abuild/rpmbuild/RPMS/i586/xorg-x11-utils-debugsource-7.5.1-3.1.i586.rpm [ 110s] /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5.1-3.1.src.rpm [ 110s] /home/abuild/rpmbuild/OTHER/_statistics [ 110s] [ 110s] w15 finished "build xorg-x11-utils.spec" at Tue Feb 3 05:55:18 UTC 2015. [ 110s] [ 111s] /.build/build: line 368: 234 Killed background_monitor_process [ 113s] [ 101.736527] SysRq : Power Off [ 113s] [ 101.848212] Power down. [ 113s] build: extracting built packages... [ 113s] xorg-x11-utils-7.5.1-3.1.i586.rpm [ 113s] xorg-x11-utils-debuginfo-7.5.1-3.1.i586.rpm [ 113s] xorg-x11-utils-debugsource-7.5.1-3.1.i586.rpm [ 113s] xorg-x11-utils-7.5.1-3.1.src.rpm [ 113s] _statistics Retried build at Tue Feb 3 02:11:44 2015 returned same result, skipped Retried build at Thu Feb 5 20:54:52 2015 returned same result, skipped