[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:capi-network-nfc.spec" at Wed Feb 4 14:11:43 UTC 2015. [ 0s] [ 0s] Building capi-network-nfc for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '59a44e321576fcbd235625954804ac71' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-nfc.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-nfc.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-nfc.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 0s] [9/57] preinstalling diffutils... [ 0s] [10/57] preinstalling elfutils-libelf... [ 0s] [11/57] preinstalling libattr... [ 0s] [12/57] preinstalling liblua... [ 0s] [13/57] preinstalling libstdc++... [ 0s] [14/57] preinstalling ncurses-libs... [ 0s] [15/57] preinstalling nspr... [ 0s] [16/57] preinstalling nss-softokn-freebl... [ 0s] [17/57] preinstalling popt... [ 0s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 1s] [35/57] preinstalling gmp-x86-arm... [ 1s] [36/57] preinstalling mpc-x86-arm... [ 1s] [37/57] preinstalling mpfr-x86-arm... [ 1s] [38/57] preinstalling bzip2-libs-x86-arm... [ 1s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus -> dbus-libs [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 3s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 3s] cycle: libresourced -> system-resource [ 3s] breaking dependency libresourced -> system-resource [ 3s] cycle: syspopup -> syspopup-caller [ 3s] breaking dependency syspopup -> syspopup-caller [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] cycle: system-resource -> system-resource-resourced [ 3s] breaking dependency system-resource-resourced -> system-resource [ 3s] done [ 10s] booting kvm ... [ 10s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 6 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 17s] Waiting for device /dev/vda to appear: ok [ 17s] fsck from util-linux 2.21.2 [ 17s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 17s] /dev/vda: clean, 4911/2392064 files, 245795/9568256 blocks [ 17s] fsck succeeded. Mounting root device read-write. [ 17s] Mounting root /dev/vda [ 17s] mount -o rw -t ext4 /dev/vda /root [ 18s] replacing /etc/mtab with symlink to /proc/self/mounts [ 18s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 19s] 2nd stage started in virtual machine [ 19s] machine type: armv7l [ 19s] switching personality to 8... [ 19s] 2nd stage started in virtual machine [ 19s] machine type: armv7l [ 19s] /.build/build: line 770: mount: command not found [ 19s] swapon on /dev/vdb [ 19s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 19s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 19s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 20s] logging output to //.build.log... [ 20s] processing specfile /.build-srcdir/_service:gbs:capi-network-nfc.spec ... [ 20s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-network-nfc.spec build rpmlint-Factory ... [ 20s] running rpm-x86-arm postinstall script [ 20s] running rpm-libs-x86-arm postinstall script [ 21s] running tizen-accelerator postinstall script [ 21s] running bash-x86-arm postinstall script [ 21s] initializing rpm db... [ 33s] [1/256] installing cross-armv7l-platformfile-0.0.1-3.1 [ 34s] [2/256] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 35s] [3/256] installing libX11-common-1.5.0-3.1 [ 36s] [4/256] installing tizen-release-2.2.0-3.1 [ 38s] [5/256] installing tzdata-2013h-3.1 [ 39s] [6/256] installing libgcc-4.6.4-3.14 [ 40s] [7/256] installing setup-0.1-3.1 [ 41s] [8/256] installing filesystem-0.1-3.1 [ 46s] warning: group lock does not exist - using root [ 46s] [9/256] installing eglibc-2.13-3.9 [ 50s] [10/256] installing libstdc++-4.6.4-3.14 [ 60s] [11/256] installing eglibc-common-2.13-3.9 [ 64s] [12/256] installing libstdc++-devel-4.6.4-3.14 [ 64s] [13/256] installing opengl-es-virtual-drv-0.1.6-3.2 [ 65s] [14/256] installing bash-4.1-3.1 [ 65s] [15/256] installing bzip2-libs-1.0.5-3.2 [ 65s] [16/256] installing c-ares-1.10.0_4-3.1 [ 65s] [17/256] installing capi-base-common-0.1.7-3.1 [ 66s] [18/256] installing cpio-2.8-3.1 [ 66s] [19/256] installing diffutils-3.0-3.1 [ 67s] [20/256] installing e2fsprogs-libs-1.41.9-3.1 [ 68s] [21/256] installing elfutils-libelf-0.152-3.8 [ 68s] [22/256] installing embryo-1.6.0+svn.76491slp2+build07-5.1 [ 68s] [23/256] installing expat-2.0.1-3.2 [ 69s] [24/256] installing fdupes-1.40-3.1 [ 69s] [25/256] installing findutils-4.2.31-3.1 [ 69s] [26/256] installing fribidi-0.19.6-3.1 [ 69s] [27/256] installing gdbm-1.8.3-3.3 [ 70s] [28/256] installing libXau-1.0.7-3.1 [ 70s] [29/256] installing libasound-1.0.25-1.0.25-2.1 [ 70s] [30/256] installing libattr-2.4.44-3.4 [ 71s] [31/256] installing libffi-3.0.9-3.1 [ 71s] [32/256] installing libflac-1.2.1+slp2+build04-3.1 [ 72s] [33/256] installing libgomp-4.6.4-3.14 [ 72s] [34/256] installing libidn-1.15-3.1 [ 72s] [35/256] installing libjpeg-turbo-1.2.0-3.1 [ 73s] [36/256] installing liblua-5.1.4-3.2 [ 84s] [37/256] installing libogg-1.2.1-3.1 [ 84s] [38/256] installing libunwind-1.1-3.2 [ 85s] [39/256] installing libuuid-2.20.2-3.1 [ 86s] [40/256] installing lzo-2.03-3.3 [ 87s] [41/256] installing m4-1.4.14-3.1 [ 87s] [42/256] installing net-tools-1.60-3.1 [ 87s] [43/256] installing nspr-4.9-3.6 [ 88s] [44/256] installing nss-softokn-freebl-3.12.9-3.11 [ 89s] [45/256] installing openssl-1.0.1k-3.2 [ 89s] [46/256] installing patch-2.6-3.1 [ 90s] [47/256] installing pixman-0.28.2-3.1 [ 90s] [48/256] installing pkg-config-0.25-2.2 [ 90s] [49/256] installing popt-1.16-3.2 [ 90s] [50/256] installing readline-5.2-3.2 [ 91s] [51/256] installing sed-4.1.5-3.1 [ 91s] [52/256] installing smack-1.0+s14-3.2 [ 91s] [53/256] installing sqlite-3.7.13-3.2 [ 91s] [54/256] installing systemd-libs-210-7.1 [ 92s] [55/256] installing tar-1.17-3.2 [ 92s] [56/256] installing xz-libs-5.0.3-3.3 [ 92s] [57/256] installing zlib-1.2.5-3.8 [ 92s] [58/256] installing gmp-4.2.1-3.2 [ 93s] [59/256] installing libpcre-7.7-3.3 [ 93s] [60/256] installing ncurses-libs-5.7-3.2 [ 94s] [61/256] installing build-compare-2009.10.14-3.5 [ 94s] [62/256] installing qemu.x86_64-1.2-5.1 [ 98s] [63/256] installing vconf-internal-keys-devel-0.0.150-3.1 [ 98s] [64/256] installing capi-base-common-devel-0.1.7-3.1 [ 98s] [65/256] installing eglibc-headers-2.13-3.9 [ 99s] [66/256] installing fribidi-devel-0.19.6-3.1 [ 99s] [67/256] installing libcap-2.21-3.2 [ 99s] [68/256] installing pixman-devel-0.28.2-3.1 [ 100s] [69/256] installing unzip-6.0-3.4 [ 100s] [70/256] installing zlib-devel-1.2.5-3.8 [ 101s] [71/256] installing freetype-2.4.9-3.1 [ 102s] [72/256] installing grep-2.5.1a-3.1 [ 103s] [73/256] installing libacl-2.2.49-3.2 [ 104s] [74/256] installing libfile-5.04-3.2 [ 105s] [75/256] installing libiri-1.7-3.1 [ 105s] [76/256] installing libpng-1.2.50-3.1 [ 107s] [77/256] installing libvorbis-1.2.3-3.1 [ 108s] [78/256] installing libxcb-1.8.1-3.1 [ 110s] [79/256] installing libxml2-2.7.8-3.2 [ 111s] [80/256] installing lzo-minilzo-2.03-3.3 [ 111s] [81/256] installing make-3.82-3.2 [ 113s] [82/256] installing mpfr-3.0.0-3.2 [ 125s] [83/256] installing ncurses-5.7-3.2 [ 126s] [84/256] installing psmisc-22.20-3.2 [ 126s] [85/256] installing bzip2-1.0.5-3.2 [ 127s] [86/256] installing glib2-2.32.3-3.1 [ 127s] [87/256] installing kmod-libs-15-3.1 [ 127s] [88/256] installing libblkid-2.20.2-3.1 [ 127s] [89/256] installing libicu-51-3.1 [ 132s] [90/256] installing smack-utils-1.0+s14-3.2 [ 133s] [91/256] installing xz-5.0.3-3.3 [ 133s] [92/256] installing binutils-2.22-3.4 [ 134s] [93/256] installing elfutils-libs-0.152-3.8 [ 135s] [94/256] installing libcurl-7.28.1_26-3.1 [ 136s] [95/256] installing nss-3.12.9-3.11 [ 140s] [96/256] installing perl-5.12.1-3.3 [ 148s] [97/256] installing ncurses-base-5.7-3.2 [ 148s] [98/256] installing perl-HTML-Tagset-3.20-3.1 [ 148s] [99/256] installing perl-IO-Compress-Base-2.008-3.3 [ 148s] [100/256] installing perl-Module-Pluggable-3.60-3.3 [ 148s] [101/256] installing perl-Pod-Escapes-1.04-3.3 [ 149s] [102/256] installing perl-TimeDate-1.20-3.1 [ 149s] [103/256] installing eglibc-devel-2.13-3.9 [ 149s] [104/256] installing smack-privilege-config-1.0.8-3.1 [ 149s] /var/tmp/rpm-tmp.VPfLHH: line 2: which: command not found [ 149s] api_feature_loader not present [ 149s] [105/256] installing file-5.04-3.2 [ 149s] [106/256] installing lzo-devel-2.03-3.3 [ 150s] [107/256] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 150s] [108/256] installing perl-devel-5.12.1-3.3 [ 150s] [109/256] installing perl-libs-5.12.1-3.3 [ 150s] [110/256] installing coreutils-6.9-3.3 [ 151s] [111/256] installing freetype-devel-2.4.9-3.1 [ 151s] [112/256] installing libX11-1.5.0-3.1 [ 152s] [113/256] installing libdlog-0.4.1-3.1 [ 152s] [114/256] installing libmount-2.20.2-3.1 [ 152s] [115/256] installing mpc-0.9-3.2 [ 153s] [116/256] installing xz-lzma-compat-5.0.3-3.3 [ 153s] [117/256] installing elfutils-0.152-3.8 [ 153s] [118/256] installing harfbuzz-0.9.7-3.1 [ 153s] [119/256] installing nss-sysinit-3.12.9-3.11 [ 154s] [120/256] installing libsndfile-1.0.28-3.1 [ 155s] [121/256] installing libarchive-2.8.3-3.1 [ 155s] [122/256] installing rpm-libs-4.9.1-4.1 [ 155s] [123/256] installing harfbuzz-devel-0.9.7-3.1 [ 155s] [124/256] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 155s] [125/256] installing perl-Pod-Simple-3.07-3.3 [ 156s] [126/256] installing perl-Test-Simple-0.80-3.3 [ 156s] [127/256] installing tizen-accelerator-1.0.1-3.1 [ 156s] [128/256] installing eina-1.7.1+svn.77445+build35-3.1 [ 157s] [129/256] installing giflib-4.1.6-3.1 [ 157s] [130/256] installing libXcomposite-0.4.4-3.1 [ 157s] [131/256] installing libXdamage-1.1.3-3.1 [ 158s] [132/256] installing libXext-1.3.1-3.1 [ 158s] [133/256] installing libXfixes-5.0-3.1 [ 158s] [134/256] installing libXrender-0.9.7-3.1 [ 158s] [135/256] installing libdlog-devel-0.4.1-3.1 [ 158s] [136/256] installing libidn-devel-1.15-3.1 [ 159s] [137/256] installing libremix-0.2.4+build14-3.1 [ 168s] [138/256] installing perl-IO-Compress-Zlib-2.008-3.3 [ 169s] [139/256] installing perl-Test-Harness-3.12-3.3 [ 169s] [140/256] installing gawk-3.1.5-3.2 [ 169s] [141/256] installing gzip-1.3.12-3.1 [ 170s] [142/256] installing xdgmime-0.0.12-3.1 [ 171s] [143/256] installing build-2011.01.10a-3.1 [ 171s] [144/256] installing bundle-0.1.35-3.1 [ 172s] [145/256] installing rpm-4.9.1-4.1 [ 172s] [146/256] installing cpp-4.6.4-3.14 [ 173s] [147/256] installing libslp-db-util-0.1.8-3.1 [ 173s] [148/256] installing sys-assert-0.3.2-3.1 [ 173s] [149/256] installing dbus-1.6.4-3.1 [ 174s] [150/256] installing util-linux-2.20.2-3.1 [ 177s] [151/256] installing cmake-2.8.5-3.1 [ 179s] [152/256] installing fontconfig-2.9.0-3.1 [ 181s] /opt/var/cache/fontconfig/*: No such file or directory [ 181s] [153/256] installing glib2-devel-2.32.3-3.1 [ 182s] [154/256] installing libprivilege-control-0.0.89-3.1 [ 187s] Applying sql update files on db [ 187s] /opt/dbspace/.rules-db.db3 [ 187s] Creating database from scratch [ 187s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 187s] Done. [ 187s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 187s] Done. [ 187s] [155/256] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 196s] [156/256] installing dbus-libs-1.6.4-3.1 [ 196s] [157/256] installing eglibc-x86-arm-2.13-2.3 [ 198s] [158/256] installing eina-devel-1.7.1+svn.77445+build35-3.1 [ 198s] [159/256] installing elfutils-libelf-x86-arm-0.152-2.1 [ 198s] [160/256] installing elfutils-libs-x86-arm-0.152-2.3 [ 198s] [161/256] installing fontconfig-devel-2.9.0-3.1 [ 199s] [162/256] installing gmp-x86-arm-4.2.1-2.1 [ 199s] [163/256] installing libacl-x86-arm-2.2.49-2.1 [ 199s] [164/256] installing libattr-x86-arm-2.4.44-2.1 [ 200s] [165/256] installing libcap-x86-arm-2.21-2.1 [ 200s] [166/256] installing libfile-x86-arm-5.04-2.2 [ 201s] [167/256] installing libgcc-x86-arm-4.6.4-2.1 [ 201s] [168/256] installing liblua-x86-arm-5.1.4-2.1 [ 202s] [169/256] installing mpc-x86-arm-0.9-2.1 [ 202s] [170/256] installing mpfr-x86-arm-3.0.0-2.1 [ 202s] [171/256] installing ncurses-libs-x86-arm-5.7-2.2 [ 202s] [172/256] installing nspr-x86-arm-4.9-2.3 [ 202s] [173/256] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 202s] [174/256] installing nss-x86-arm-3.12.9-2.3 [ 203s] [175/256] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 203s] [176/256] installing popt-x86-arm-1.16-2.1 [ 203s] [177/256] installing rpm-libs-x86-arm-4.9.1-2.2 [ 203s] [178/256] installing sqlite-x86-arm-3.7.13-2.1 [ 204s] [179/256] installing xz-libs-x86-arm-5.0.3-2.1 [ 204s] [180/256] installing zlib-x86-arm-1.2.5-2.1 [ 204s] [181/256] installing ecore-1.7.1+svn.77580+build125-5.1 [ 204s] [182/256] installing libXgesture-0.1.1-3.1 [ 204s] [183/256] installing libXi-1.6.1-3.1 [ 204s] [184/256] installing libXinerama-1.1.2-3.1 [ 204s] [185/256] installing libXtst-1.2.0-3.1 [ 205s] [186/256] installing libXv-1.0.7-3.1 [ 205s] [187/256] installing libcurl-devel-7.28.1_26-3.1 [ 205s] [188/256] installing eet-1.7.1+svn.77495+build14-5.1 [ 205s] [189/256] installing libXcursor-1.1.13-3.1 [ 205s] [190/256] installing libXrandr-1.4.0-3.1 [ 206s] [191/256] installing librua-0.1.8-3.1 [ 206s] [192/256] installing systemd-210-7.1 [ 207s] [193/256] installing gcc-4.6.4-3.14 [ 209s] [194/256] installing rpm-build-4.9.1-4.1 [ 209s] [195/256] installing libjournal-0.1.0-2.1 [ 209s] [196/256] installing perl-CPAN-1.9205-3.3 [ 210s] [197/256] installing bash-x86-arm-4.1-2.1 [ 210s] [198/256] installing dbus-glib-0.100-3.1 [ 211s] [199/256] installing ecore-imf-1.7.1+svn.77580+build125-5.1 [ 211s] [200/256] installing ecore-input-1.7.1+svn.77580+build125-5.1 [ 211s] [201/256] installing eet-devel-1.7.1+svn.77495+build14-5.1 [ 212s] [202/256] installing fdupes-x86-arm-1.40-2.1 [ 212s] [203/256] installing findutils-x86-arm-4.2.31-2.1 [ 212s] [204/256] installing gawk-x86-arm-3.1.5-2.2 [ 212s] [205/256] installing gzip-x86-arm-1.3.12-2.1 [ 213s] [206/256] installing make-x86-arm-3.82-2.1 [ 214s] [207/256] installing sed-x86-arm-4.1.5-2.1 [ 215s] [208/256] installing tar-x86-arm-1.17-2.2 [ 215s] [209/256] installing diffutils-x86-arm-3.0-2.1 [ 216s] [210/256] installing patch-x86-arm-2.6-2.1 [ 216s] [211/256] installing autoconf-2.68-3.1 [ 217s] [212/256] installing coreutils-x86-arm-6.9-2.1 [ 219s] [213/256] installing ecore-con-1.7.1+svn.77580+build125-5.1 [ 220s] [214/256] installing file-x86-arm-5.04-2.1 [ 220s] [215/256] installing libslp-utilx-0.4.5-3.1 [ 220s] [216/256] installing vconf-0.2.83-3.1 [ 220s] Failed to get D-Bus connection: Unknown error 4294967295 [ 220s] warning: %post(vconf-0.2.83-3.1.armv7l) scriptlet failed, exit status 1 [ 220s] [217/256] installing elfutils-x86-arm-0.152-2.3 [ 221s] [218/256] installing gcc-c++-4.6.4-3.14 [ 222s] [219/256] installing security-server-0.0.125-3.1 [ 223s] Failed to get D-Bus connection: Unknown error 4294967295 [ 223s] Failed to get D-Bus connection: Unknown error 4294967295 [ 223s] [220/256] installing evas-1.7.1+svn.77561+build187-5.1 [ 223s] [221/256] installing rpm-x86-arm-4.9.1-2.2 [ 228s] /bin/rpm.orig-arm already present - skipping. [ 228s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 228s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 228s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 228s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 228s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 228s] [222/256] installing rpm-build-x86-arm-4.9.1-2.2 [ 229s] [223/256] installing vconf-keys-devel-0.2.83-3.1 [ 230s] [224/256] installing automake-1.11.1-3.1 [ 230s] [225/256] installing ecore-fb-1.7.1+svn.77580+build125-5.1 [ 230s] [226/256] installing ecore-file-1.7.1+svn.77580+build125-5.1 [ 231s] [227/256] installing ecore-imf-evas-1.7.1+svn.77580+build125-5.1 [ 231s] [228/256] installing ecore-ipc-1.7.1+svn.77580+build125-5.1 [ 231s] [229/256] installing libsecurity-server-client-0.0.125-3.1 [ 232s] [230/256] installing ecore-input-evas-1.7.1+svn.77580+build125-5.1 [ 232s] [231/256] installing edbus-1.6.0+svn.76526slp2+build10-3.1 [ 232s] [232/256] installing ail-0.2.95-3.1 [ 232s] [233/256] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 255s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 255s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 255s] [234/256] installing evas-devel-1.7.1+svn.77561+build187-5.1 [ 256s] [235/256] installing pkgmgr-info-0.0.230-3.1 [ 256s] [236/256] installing ecore-x-1.7.1+svn.77580+build125-5.1 [ 257s] [237/256] installing libtool-2.2.6b-3.2 [ 257s] [238/256] installing vconf-devel-0.2.83-3.1 [ 257s] [239/256] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 259s] [240/256] installing efreet-1.7.1+svn.77412+build14-3.1 [ 260s] [241/256] installing libresourced-0.2.86-3.1 [ 260s] [242/256] installing pkgmgr-info-parser-0.0.230-3.1 [ 260s] [243/256] installing ecore-evas-1.7.1+svn.77580+build125-5.1 [ 261s] [244/256] installing edje-1.7.1+svn.77330+build179-3.1 [ 261s] [245/256] installing system-resource-resourced-0.2.86-3.1 [ 262s] [246/256] installing ecore-devel-1.7.1+svn.77580+build125-5.1 [ 262s] [247/256] installing aul-0.2.3.0-3.1 [ 263s] [248/256] installing system-resource-0.2.86-3.1 [ 263s] [249/256] installing ethumb-1.6.0+svn.75994slp2+build09-3.1 [ 263s] [250/256] installing elementary-1.7.1+svn.77535+build567-3.1 [ 264s] [251/256] installing syspopup-0.0.134-3.1 [ 265s] [252/256] installing bluetooth-frwk-0.2.146-3.1 [ 265s] [253/256] installing syspopup-caller-0.0.134-3.1 [ 265s] [254/256] installing nfc-common-lib-0.1.78-3.1 [ 265s] [255/256] installing nfc-client-lib-0.1.78-3.1 [ 266s] [256/256] installing nfc-client-lib-devel-0.1.78-3.1 [ 266s] removing nis flags from //etc/nsswitch.conf... [ 266s] now finalizing build dir... [ 266s] /.build/build: line 2585: mount: command not found [ 266s] /.build/build: line 2586: mount: command not found [ 273s] build target is armv7l-tizen-linux [ 273s] ----------------------------------------------------------------- [ 273s] I have the following modifications for capi-network-nfc.spec: [ 273s] 6c6 [ 273s] < Release: 0 [ 273s] --- [ 273s] > Release: 3.1 [ 273s] ----------------------------------------------------------------- [ 273s] ----- building capi-network-nfc.spec (user abuild) [ 273s] ----------------------------------------------------------------- [ 273s] ----------------------------------------------------------------- [ 273s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/59a44e321576fcbd235625954804ac71-capi-network-nfc' /home/abuild/rpmbuild/SOURCES/capi-network-nfc.spec [ 273s] Building target platforms: armv7l-tizen-linux [ 273s] Building for target armv7l-tizen-linux [ 273s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ML0y4U [ 273s] + umask 022 [ 273s] + cd /home/abuild/rpmbuild/BUILD [ 273s] + LANG=C [ 273s] + export LANG [ 273s] + unset DISPLAY [ 273s] + cd /home/abuild/rpmbuild/BUILD [ 273s] + rm -rf capi-network-nfc-0.1.16 [ 273s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-nfc-0.1.16.tar.gz [ 273s] + /bin/tar -xf - [ 273s] + STATUS=0 [ 273s] + '[' 0 -ne 0 ']' [ 273s] + cd capi-network-nfc-0.1.16 [ 273s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 273s] + exit 0 [ 273s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.u1pz4S [ 273s] + umask 022 [ 273s] + cd /home/abuild/rpmbuild/BUILD [ 273s] + cd capi-network-nfc-0.1.16 [ 273s] + LANG=C [ 273s] + export LANG [ 273s] + unset DISPLAY [ 273s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 273s] + export CFLAGS [ 273s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 273s] + export CXXFLAGS [ 273s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 273s] + export FFLAGS [ 273s] + LD_AS_NEEDED=1 [ 273s] + export LD_AS_NEEDED [ 273s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 273s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 273s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 273s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 273s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 273s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 273s] ++ awk 'BEGIN {FS="."}{print $1}' [ 273s] ++ echo 0.1.16 [ 273s] + MAJORVER=0 [ 273s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DFULLVER=0.1.16 -DMAJORVER=0 [ 273s] -- The C compiler identification is GNU [ 273s] -- The CXX compiler identification is GNU [ 273s] -- Check for working C compiler: /usr/bin/gcc [ 274s] -- Check for working C compiler: /usr/bin/gcc -- works [ 274s] -- Detecting C compiler ABI info [ 274s] -- Detecting C compiler ABI info - done [ 274s] -- Check for working CXX compiler: /usr/bin/c++ [ 274s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 274s] -- Detecting CXX compiler ABI info [ 275s] -- Detecting CXX compiler ABI info - done [ 275s] -- checking for module 'dlog glib-2.0 gio-2.0 nfc capi-base-common vconf ecore-x' [ 275s] -- found dlog glib-2.0 gio-2.0 nfc capi-base-common vconf ecore-x, version 1.0;2.32.3;2.32.3;$version;0.1.7;0.2.45;1.7.99.0 [ 276s] -- Configuring done [ 276s] -- Generating done [ 276s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-nfc-0.1.16 [ 276s] + make -j6 [ 276s] Scanning dependencies of target capi-network-nfc [ 276s] [100%] Building C object CMakeFiles/capi-network-nfc.dir/src/nfc.c.o [ 277s] Linking C shared library libcapi-network-nfc.so [ 278s] [100%] Built target capi-network-nfc [ 278s] + exit 0 [ 278s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.A9tcK9 [ 278s] + umask 022 [ 278s] + cd /home/abuild/rpmbuild/BUILD [ 278s] + cd capi-network-nfc-0.1.16 [ 278s] + LANG=C [ 278s] + export LANG [ 278s] + unset DISPLAY [ 278s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 278s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 278s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 278s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/share/license [ 278s] + cp -af /home/abuild/rpmbuild/BUILD/capi-network-nfc-0.1.16/packaging/capi-network-nfc /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/share/license/ [ 278s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm install [ 278s] [100%] Built target capi-network-nfc [ 278s] Install the project... [ 278s] -- Install configuration: "" [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/lib/libcapi-network-nfc.so.0.1.16 [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/lib/libcapi-network-nfc.so.0 [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/lib/libcapi-network-nfc.so [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/include/network [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/include/network/nfc_internal.h [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/include/network/nfc.h [ 278s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/lib/pkgconfig/capi-network-nfc.pc [ 278s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/share/info/dir [ 278s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm -regex '.*\.la$' [ 278s] + xargs rm -f -- [ 278s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm -regex '.*\.a$' [ 278s] + xargs rm -f -- [ 278s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/capi-network-nfc-0.1.16 [ 278s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm/usr/lib/libcapi-network-nfc.so.0.1.16 [ 278s] symlinked /usr/lib/debug/usr/lib/libcapi-network-nfc.so.0.1.16.debug to /usr/lib/debug/usr/lib/libcapi-network-nfc.so.debug [ 278s] symlinked /usr/lib/debug/usr/lib/libcapi-network-nfc.so.0.1.16.debug to /usr/lib/debug/usr/lib/libcapi-network-nfc.so.0.debug [ 278s] 464 blocks [ 278s] + /usr/lib/rpm/check-buildroot [ 279s] + /usr/lib/rpm//brp-compress [ 279s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 279s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 279s] + /usr/lib/rpm/brp-python-hardlink [ 279s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 279s] Processing files: capi-network-nfc-0.1.16-3.1.armv7l [ 279s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 279s] ZXF1ZXN0Pgo8L21hbmlmZXN0PgoK [ 279s] [ 279s] Provides: libcapi-network-nfc.so.0 [ 279s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 279s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 279s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 279s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 279s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcapi-base-common.so.0 libcapi-network-nfc.so.0 libdlog.so.0 libecore_x.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libnfc.so.1 libpthread.so.0 [ 279s] Processing files: capi-network-nfc-devel-0.1.16-3.1.armv7l [ 279s] Provides: pkgconfig(capi-network-nfc) = 0.0.3 [ 279s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 279s] Requires: /usr/bin/pkg-config libcapi-network-nfc.so.0 pkgconfig(capi-base-common) [ 279s] Processing files: capi-network-nfc-debuginfo-0.1.16-3.1.armv7l [ 279s] Processing files: capi-network-nfc-debugsource-0.1.16-3.1.armv7l [ 279s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 279s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-nfc-0.1.16-3.1.src.rpm [ 279s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-0.1.16-3.1.armv7l.rpm [ 279s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-devel-0.1.16-3.1.armv7l.rpm [ 279s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-debuginfo-0.1.16-3.1.armv7l.rpm [ 279s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-debugsource-0.1.16-3.1.armv7l.rpm [ 279s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qxtcNb [ 279s] + umask 022 [ 279s] + cd /home/abuild/rpmbuild/BUILD [ 279s] + cd capi-network-nfc-0.1.16 [ 279s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-nfc-0.1.16-3.1.arm [ 279s] + exit 0 [ 279s] ... checking for files with abuild user/group [ 279s] ... creating baselibs [ 280s] ... saving built statistics [ 280s] /.build/build: line 3144: mount: command not found [ 280s] ERROR: no root disk device found, yet another new device name? [ 280s] ls: cannot access /sys/block/: No such file or directory [ 280s] /.build/build: line 3159: umount: command not found [ 280s] ... saving built packages [ 280s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-0.1.16-3.1.armv7l.rpm [ 280s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-debuginfo-0.1.16-3.1.armv7l.rpm [ 280s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-debugsource-0.1.16-3.1.armv7l.rpm [ 280s] /home/abuild/rpmbuild/RPMS/armv7l/capi-network-nfc-devel-0.1.16-3.1.armv7l.rpm [ 280s] /home/abuild/rpmbuild/SRPMS/capi-network-nfc-0.1.16-3.1.src.rpm [ 280s] /home/abuild/rpmbuild/OTHER/_statistics [ 280s] [ 280s] w21 finished "build capi-network-nfc.spec" at Wed Feb 4 14:16:24 UTC 2015. [ 280s] [ 283s] [ 270.510500] SysRq : Power Off [ 284s] [ 270.728179] Power down. [ 285s] build: extracting built packages... [ 290s] capi-network-nfc-0.1.16-3.1.armv7l.rpm [ 290s] capi-network-nfc-debuginfo-0.1.16-3.1.armv7l.rpm [ 290s] capi-network-nfc-debugsource-0.1.16-3.1.armv7l.rpm [ 290s] capi-network-nfc-devel-0.1.16-3.1.armv7l.rpm [ 290s] capi-network-nfc-0.1.16-3.1.src.rpm [ 290s] _statistics Retried build at Thu Feb 5 23:14:57 2015 returned same result, skipped