[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w09 started "build _service:gbs:gssdp.spec" at Wed Feb 4 12:43:55 UTC 2015. [ 0s] [ 0s] Building gssdp for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '08cf4fc51133e67172a99a3a2140d65b' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:gssdp.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:gssdp.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 0s] [9/57] preinstalling diffutils... [ 0s] [10/57] preinstalling elfutils-libelf... [ 0s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 1s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 8s] booting kvm ... [ 8s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 4712/2392064 files, 240290/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 17s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] switching personality to 8... [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] /.build/build: line 770: mount: command not found [ 17s] swapon on /dev/vdb [ 18s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 18s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 18s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 18s] logging output to //.build.log... [ 18s] processing specfile /.build-srcdir/_service:gbs:gssdp.spec ... [ 18s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:gssdp.spec build rpmlint-Factory ... [ 18s] running rpm-x86-arm postinstall script [ 19s] running rpm-libs-x86-arm postinstall script [ 19s] running tizen-accelerator postinstall script [ 19s] running bash-x86-arm postinstall script [ 19s] initializing rpm db... [ 30s] [1/156] installing cross-armv7l-platformfile-0.0.1-3.1 [ 33s] [2/156] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 34s] [3/156] installing tizen-release-2.2.0-3.1 [ 35s] [4/156] installing tzdata-2013h-3.1 [ 36s] [5/156] installing libgcc-4.6.4-3.14 [ 37s] [6/156] installing setup-0.1-3.1 [ 42s] [7/156] installing filesystem-0.1-3.1 [ 43s] warning: group lock does not exist - using root [ 43s] [8/156] installing eglibc-2.13-3.9 [ 45s] [9/156] installing libstdc++-4.6.4-3.14 [ 46s] [10/156] installing eglibc-common-2.13-3.9 [ 53s] [11/156] installing libstdc++-devel-4.6.4-3.14 [ 54s] [12/156] installing bash-4.1-3.1 [ 54s] [13/156] installing bzip2-libs-1.0.5-3.2 [ 55s] [14/156] installing cpio-2.8-3.1 [ 55s] [15/156] installing diffutils-3.0-3.1 [ 56s] [16/156] installing e2fsprogs-libs-1.41.9-3.1 [ 57s] [17/156] installing elfutils-libelf-0.152-3.8 [ 58s] [18/156] installing fdupes-1.40-3.1 [ 58s] [19/156] installing findutils-4.2.31-3.1 [ 59s] [20/156] installing gdbm-1.8.3-3.3 [ 59s] [21/156] installing libattr-2.4.44-3.4 [ 59s] [22/156] installing libffi-3.0.9-3.1 [ 60s] [23/156] installing libgomp-4.6.4-3.14 [ 60s] [24/156] installing liblua-5.1.4-3.2 [ 61s] [25/156] installing libuuid-2.20.2-3.1 [ 61s] [26/156] installing lzo-2.03-3.3 [ 62s] [27/156] installing m4-1.4.14-3.1 [ 62s] [28/156] installing net-tools-1.60-3.1 [ 63s] [29/156] installing nspr-4.9-3.6 [ 63s] [30/156] installing nss-softokn-freebl-3.12.9-3.11 [ 64s] [31/156] installing patch-2.6-3.1 [ 65s] [32/156] installing pkg-config-0.25-2.2 [ 66s] [33/156] installing popt-1.16-3.2 [ 67s] [34/156] installing readline-5.2-3.2 [ 67s] [35/156] installing sed-4.1.5-3.1 [ 67s] [36/156] installing smack-1.0+s14-3.2 [ 68s] [37/156] installing sqlite-3.7.13-3.2 [ 69s] [38/156] installing tar-1.17-3.2 [ 69s] [39/156] installing xz-libs-5.0.3-3.3 [ 69s] [40/156] installing zlib-1.2.5-3.8 [ 69s] [41/156] installing gmp-4.2.1-3.2 [ 70s] [42/156] installing libpcre-7.7-3.3 [ 70s] [43/156] installing ncurses-libs-5.7-3.2 [ 70s] [44/156] installing build-compare-2009.10.14-3.5 [ 70s] [45/156] installing qemu.x86_64-1.2-5.1 [ 73s] [46/156] installing eglibc-headers-2.13-3.9 [ 74s] [47/156] installing libcap-2.21-3.2 [ 74s] [48/156] installing unzip-6.0-3.4 [ 74s] [49/156] installing zlib-devel-1.2.5-3.8 [ 75s] [50/156] installing grep-2.5.1a-3.1 [ 75s] [51/156] installing libacl-2.2.49-3.2 [ 75s] [52/156] installing libfile-5.04-3.2 [ 75s] [53/156] installing libpython-2.7.1-3.3 [ 75s] [54/156] installing libxml2-2.7.8-3.2 [ 76s] [55/156] installing lzo-minilzo-2.03-3.3 [ 76s] [56/156] installing make-3.82-3.2 [ 76s] [57/156] installing mpfr-3.0.0-3.2 [ 76s] [58/156] installing ncurses-5.7-3.2 [ 77s] [59/156] installing nettle-2.1_2.3-3.1 [ 77s] [60/156] installing bzip2-1.0.5-3.2 [ 77s] [61/156] installing glib2-2.32.3-3.1 [ 77s] [62/156] installing libblkid-2.20.2-3.1 [ 77s] [63/156] installing smack-utils-1.0+s14-3.2 [ 77s] [64/156] installing spindly-0.0.9-3.1 [ 78s] [65/156] installing xz-5.0.3-3.3 [ 78s] [66/156] installing binutils-2.22-3.4 [ 78s] [67/156] installing elfutils-libs-0.152-3.8 [ 78s] [68/156] installing nss-3.12.9-3.11 [ 79s] [69/156] installing perl-5.12.1-3.3 [ 92s] [70/156] installing ncurses-base-5.7-3.2 [ 93s] [71/156] installing perl-HTML-Tagset-3.20-3.1 [ 93s] [72/156] installing perl-IO-Compress-Base-2.008-3.3 [ 93s] [73/156] installing perl-Module-Pluggable-3.60-3.3 [ 93s] [74/156] installing perl-Pod-Escapes-1.04-3.3 [ 93s] [75/156] installing perl-TimeDate-1.20-3.1 [ 94s] [76/156] installing eglibc-devel-2.13-3.9 [ 94s] [77/156] installing file-5.04-3.2 [ 94s] [78/156] installing lzo-devel-2.03-3.3 [ 94s] [79/156] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 94s] [80/156] installing perl-devel-5.12.1-3.3 [ 95s] [81/156] installing perl-libs-5.12.1-3.3 [ 96s] [82/156] installing coreutils-6.9-3.3 [ 97s] [83/156] installing libdlog-0.4.1-3.1 [ 98s] [84/156] installing libmount-2.20.2-3.1 [ 98s] [85/156] installing mpc-0.9-3.2 [ 98s] [86/156] installing xz-lzma-compat-5.0.3-3.3 [ 98s] [87/156] installing elfutils-0.152-3.8 [ 98s] [88/156] installing gnutls-2.12.20_2.6-3.1 [ 99s] [89/156] installing nss-sysinit-3.12.9-3.11 [ 99s] [90/156] installing python-base-2.7.1-3.3 [ 100s] [91/156] installing rpm-libs-4.9.1-4.1 [ 100s] [92/156] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 100s] [93/156] installing perl-Pod-Simple-3.07-3.3 [ 100s] [94/156] installing perl-Test-Simple-0.80-3.3 [ 101s] [95/156] installing tizen-accelerator-1.0.1-3.1 [ 101s] [96/156] installing perl-IO-Compress-Zlib-2.008-3.3 [ 101s] [97/156] installing perl-Test-Harness-3.12-3.3 [ 102s] [98/156] installing gawk-3.1.5-3.2 [ 102s] [99/156] installing glib-networking-2.32.3_1.7-3.1 [ 102s] [100/156] installing gzip-1.3.12-3.1 [ 102s] [101/156] installing build-2011.01.10a-3.1 [ 102s] [102/156] installing python-devel-2.7.1-3.3 [ 103s] [103/156] installing rpm-4.9.1-4.1 [ 103s] [104/156] installing cpp-4.6.4-3.14 [ 104s] [105/156] installing util-linux-2.20.2-3.1 [ 104s] [106/156] installing glib2-devel-2.32.3-3.1 [ 104s] [107/156] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 105s] [108/156] installing eglibc-x86-arm-2.13-2.3 [ 106s] [109/156] installing elfutils-libelf-x86-arm-0.152-2.1 [ 107s] [110/156] installing elfutils-libs-x86-arm-0.152-2.3 [ 107s] [111/156] installing gmp-x86-arm-4.2.1-2.1 [ 108s] [112/156] installing libacl-x86-arm-2.2.49-2.1 [ 108s] [113/156] installing libattr-x86-arm-2.4.44-2.1 [ 108s] [114/156] installing libcap-x86-arm-2.21-2.1 [ 108s] [115/156] installing libfile-x86-arm-5.04-2.2 [ 109s] [116/156] installing libgcc-x86-arm-4.6.4-2.1 [ 109s] [117/156] installing liblua-x86-arm-5.1.4-2.1 [ 109s] [118/156] installing mpc-x86-arm-0.9-2.1 [ 110s] [119/156] installing mpfr-x86-arm-3.0.0-2.1 [ 110s] [120/156] installing ncurses-libs-x86-arm-5.7-2.2 [ 111s] [121/156] installing nspr-x86-arm-4.9-2.3 [ 111s] [122/156] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 112s] [123/156] installing nss-x86-arm-3.12.9-2.3 [ 113s] [124/156] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 113s] [125/156] installing popt-x86-arm-1.16-2.1 [ 114s] [126/156] installing rpm-libs-x86-arm-4.9.1-2.2 [ 114s] [127/156] installing sqlite-x86-arm-3.7.13-2.1 [ 115s] [128/156] installing xz-libs-x86-arm-5.0.3-2.1 [ 115s] [129/156] installing zlib-x86-arm-1.2.5-2.1 [ 116s] [130/156] installing libxml2-devel-2.7.8-3.2 [ 116s] [131/156] installing libsoup2.4-2.38.1_0.5.11-3.1 [ 117s] [132/156] installing gcc-4.6.4-3.14 [ 118s] [133/156] installing rpm-build-4.9.1-4.1 [ 118s] [134/156] installing perl-CPAN-1.9205-3.3 [ 119s] [135/156] installing bash-x86-arm-4.1-2.1 [ 119s] [136/156] installing fdupes-x86-arm-1.40-2.1 [ 119s] [137/156] installing findutils-x86-arm-4.2.31-2.1 [ 119s] [138/156] installing gawk-x86-arm-3.1.5-2.2 [ 120s] [139/156] installing gzip-x86-arm-1.3.12-2.1 [ 120s] [140/156] installing libsoup2.4-devel-2.38.1_0.5.11-3.1 [ 120s] [141/156] installing make-x86-arm-3.82-2.1 [ 123s] [142/156] installing sed-x86-arm-4.1.5-2.1 [ 124s] [143/156] installing tar-x86-arm-1.17-2.2 [ 124s] [144/156] installing diffutils-x86-arm-3.0-2.1 [ 125s] [145/156] installing patch-x86-arm-2.6-2.1 [ 125s] [146/156] installing autoconf-2.68-3.1 [ 126s] [147/156] installing coreutils-x86-arm-6.9-2.1 [ 129s] [148/156] installing file-x86-arm-5.04-2.1 [ 129s] [149/156] installing elfutils-x86-arm-0.152-2.3 [ 130s] [150/156] installing gcc-c++-4.6.4-3.14 [ 131s] [151/156] installing rpm-x86-arm-4.9.1-2.2 [ 131s] /bin/rpm.orig-arm already present - skipping. [ 131s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 131s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 131s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 131s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 131s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 131s] [152/156] installing rpm-build-x86-arm-4.9.1-2.2 [ 132s] [153/156] installing automake-1.11.1-3.1 [ 133s] [154/156] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 135s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 135s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 135s] [155/156] installing libtool-2.2.6b-3.2 [ 135s] [156/156] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 136s] removing nis flags from //etc/nsswitch.conf... [ 136s] now finalizing build dir... [ 136s] /.build/build: line 2585: mount: command not found [ 136s] /.build/build: line 2586: mount: command not found [ 140s] build target is armv7l-tizen-linux [ 140s] ----------------------------------------------------------------- [ 140s] I have the following modifications for gssdp.spec: [ 140s] 4c4 [ 140s] < Release: 1 [ 140s] --- [ 140s] > Release: 3.1 [ 140s] ----------------------------------------------------------------- [ 140s] ----- building gssdp.spec (user abuild) [ 140s] ----------------------------------------------------------------- [ 140s] ----------------------------------------------------------------- [ 140s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/08cf4fc51133e67172a99a3a2140d65b-gssdp' /home/abuild/rpmbuild/SOURCES/gssdp.spec [ 140s] Building target platforms: armv7l-tizen-linux [ 140s] Building for target armv7l-tizen-linux [ 140s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Mczfvf [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + LANG=C [ 140s] + export LANG [ 140s] + unset DISPLAY [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + rm -rf gssdp-0.8.2_2 [ 140s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/gssdp-0.8.2_2.tar.gz [ 140s] + /bin/tar -xf - [ 140s] + STATUS=0 [ 140s] + '[' 0 -ne 0 ']' [ 140s] + cd gssdp-0.8.2_2 [ 140s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 140s] + echo 'Patch #1 (specified_ssdp_addr.patch):' [ 140s] Patch #1 (specified_ssdp_addr.patch): [ 140s] + /bin/cat /home/abuild/rpmbuild/SOURCES/specified_ssdp_addr.patch [ 140s] + /usr/bin/patch -s -p1 --fuzz=2 [ 140s] + echo 'Patch #2 (fixed_netmask_filter_bug.patch):' [ 140s] Patch #2 (fixed_netmask_filter_bug.patch): [ 140s] + /usr/bin/patch -s -p1 --fuzz=2 [ 140s] + /bin/cat /home/abuild/rpmbuild/SOURCES/fixed_netmask_filter_bug.patch [ 140s] + exit 0 [ 140s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.8cdeYe [ 140s] + umask 022 [ 140s] + cd /home/abuild/rpmbuild/BUILD [ 140s] + cd gssdp-0.8.2_2 [ 140s] + LANG=C [ 140s] + export LANG [ 140s] + unset DISPLAY [ 140s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 140s] + export CFLAGS [ 140s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 140s] + export CXXFLAGS [ 140s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 140s] + export FFLAGS [ 140s] + LD_AS_NEEDED=1 [ 140s] + export LD_AS_NEEDED [ 140s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 140s] + export CFLAGS [ 140s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 140s] + export CXXFLAGS [ 140s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 140s] + export FFLAGS [ 140s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-introspection=no --enable-gtk-doc-html=no [ 140s] checking for a BSD-compatible install... /usr/bin/install -c [ 141s] checking whether build environment is sane... yes [ 141s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 141s] checking for gawk... gawk [ 141s] checking whether make sets $(MAKE)... yes [ 141s] checking for style of include used by make... GNU [ 141s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 141s] checking for gcc... gcc [ 141s] checking whether the C compiler works... yes [ 141s] checking for C compiler default output file name... a.out [ 141s] checking for suffix of executables... [ 141s] checking whether we are cross compiling... no [ 141s] checking for suffix of object files... o [ 141s] checking whether we are using the GNU C compiler... yes [ 141s] checking whether gcc accepts -g... yes [ 141s] checking for gcc option to accept ISO C89... none needed [ 142s] checking dependency style of gcc... gcc3 [ 142s] checking for library containing strerror... none required [ 142s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 142s] checking whether we are using the GNU C compiler... (cached) yes [ 142s] checking whether gcc accepts -g... (cached) yes [ 142s] checking for gcc option to accept ISO C89... (cached) none needed [ 142s] checking dependency style of gcc... (cached) gcc3 [ 142s] checking how to run the C preprocessor... gcc -E [ 142s] checking for grep that handles long lines and -e... /bin/grep [ 142s] checking for egrep... /bin/grep -E [ 142s] checking for ANSI C header files... yes [ 142s] checking build system type... armv7l-unknown-linux-gnueabi [ 142s] checking host system type... armv7l-unknown-linux-gnueabi [ 142s] checking for a sed that does not truncate output... /bin/sed [ 142s] checking for fgrep... /bin/grep -F [ 142s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 142s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 142s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 142s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 142s] checking whether ln -s works... yes [ 142s] checking the maximum length of command line arguments... 1572864 [ 142s] checking whether the shell understands some XSI constructs... yes [ 142s] checking whether the shell understands "+="... yes [ 142s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 142s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 142s] checking for objdump... objdump [ 142s] checking how to recognize dependent libraries... pass_all [ 142s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 142s] checking for ar... ar [ 142s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 142s] checking for strip... strip [ 142s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 142s] checking for ranlib... ranlib [ 142s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 142s] checking for sys/types.h... yes [ 142s] checking for sys/stat.h... yes [ 142s] checking for stdlib.h... yes [ 142s] checking for string.h... yes [ 142s] checking for memory.h... yes [ 142s] checking for strings.h... yes [ 142s] checking for inttypes.h... yes [ 142s] checking for stdint.h... yes [ 142s] checking for unistd.h... yes [ 142s] checking for dlfcn.h... yes [ 142s] checking for objdir... .libs [ 142s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 142s] checking for gcc option to produce PIC... -fPIC -DPIC [ 142s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 143s] checking if gcc static flag -static works... no [ 143s] checking if gcc supports -c -o file.o... yes [ 143s] checking if gcc supports -c -o file.o... (cached) yes [ 143s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 143s] checking whether -lc should be explicitly linked in... no [ 143s] checking dynamic linker characteristics... GNU/Linux ld.so [ 143s] checking how to hardcode library paths into programs... immediate [ 143s] checking whether stripping libraries is possible... yes [ 143s] checking if libtool supports shared libraries... yes [ 143s] checking whether to build shared libraries... yes [ 143s] checking whether to build static libraries... yes [ 143s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 143s] checking for pkg-config... /usr/bin/pkg-config [ 143s] checking pkg-config is at least version 0.9.0... yes [ 143s] checking for LIBGSSDP... yes [ 143s] checking for LIBGTK... no [ 143s] configure: WARNING: gtk+ 2.12.0 or greater not found, some tools will not build. [ 143s] checking for gobject-introspection... no (disabled, use --enable-introspection to enable) [ 143s] checking for gtkdoc-check... no [ 143s] checking for gtkdoc-rebase... no [ 143s] checking for gtkdoc-mkpdf... no [ 143s] checking whether to build gtk-doc documentation... no [ 143s] configure: creating ./config.status [ 143s] config.status: creating Makefile [ 143s] config.status: creating libgssdp/Makefile [ 143s] config.status: creating tools/Makefile [ 143s] config.status: creating tests/Makefile [ 143s] config.status: creating doc/Makefile [ 143s] config.status: creating doc/version.xml [ 143s] config.status: creating gssdp-1.0.pc [ 143s] config.status: creating gssdp-1.0-uninstalled.pc [ 143s] config.status: creating config.h [ 143s] config.status: executing depfiles commands [ 144s] config.status: executing libtool commands [ 144s] + make -j4 [ 144s] make all-recursive [ 144s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 144s] Making all in libgssdp [ 144s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 144s] GEN gssdp-marshal.c [ 144s] GEN gssdp-marshal.h [ 144s] make all-am [ 144s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 144s] CC gssdp-client.lo [ 144s] CC gssdp-resource-browser.lo [ 144s] CC gssdp-resource-group.lo [ 144s] CC gssdp-error.lo [ 144s] CC gssdp-socket-source.lo [ 144s] CC gssdp-marshal.lo [ 144s] CCLD libgssdp-1.0.la [ 144s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 144s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 144s] Making all in tests [ 144s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 144s] CC test-browser.o [ 144s] CC test-publish.o [ 145s] CCLD test-publish [ 145s] CCLD test-browser [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 145s] Making all in doc [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[2]: Nothing to be done for `all'. [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] make[2]: Nothing to be done for `all-am'. [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] + exit 0 [ 145s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.oJHLMw [ 145s] + umask 022 [ 145s] + cd /home/abuild/rpmbuild/BUILD [ 145s] + cd gssdp-0.8.2_2 [ 145s] + LANG=C [ 145s] + export LANG [ 145s] + unset DISPLAY [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 145s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 145s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm install [ 145s] Making install in libgssdp [ 145s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] /usr/bin/make install-am [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib" [ 145s] /bin/sh ../libtool --mode=install /usr/bin/install -c libgssdp-1.0.la '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib' [ 145s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.so.2.0.0 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.so.2.0.0 [ 145s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.2.0.0 libgssdp-1.0.so.2 || { rm -f libgssdp-1.0.so.2 && ln -s libgssdp-1.0.so.2.0.0 libgssdp-1.0.so.2; }; }) [ 145s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib && { ln -s -f libgssdp-1.0.so.2.0.0 libgssdp-1.0.so || { rm -f libgssdp-1.0.so && ln -s libgssdp-1.0.so.2.0.0 libgssdp-1.0.so; }; }) [ 145s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.lai /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.la [ 145s] libtool: install: /usr/bin/install -c .libs/libgssdp-1.0.a /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.a [ 145s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.a [ 145s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.a [ 145s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 145s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm" [ 145s] test -z "/usr/include/gssdp-1.0/libgssdp" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/include/gssdp-1.0/libgssdp" [ 145s] /usr/bin/install -c -m 644 gssdp-client.h gssdp-error.h gssdp-resource-browser.h gssdp-resource-group.h gssdp.h '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/include/gssdp-1.0/libgssdp' [ 145s] test -z "" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm" [ 145s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/libgssdp' [ 145s] Making install in tests [ 145s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 145s] make[2]: Nothing to be done for `install-exec-am'. [ 145s] make[2]: Nothing to be done for `install-data-am'. [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 145s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/tests' [ 145s] Making install in doc [ 145s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[2]: Nothing to be done for `install-exec-am'. [ 145s] -- Installing ./html/GSSDPClient.html [ 145s] -- Installing ./html/GSSDPResourceBrowser.html [ 145s] -- Installing ./html/GSSDPResourceGroup.html [ 145s] -- Installing ./html/ch01.html [ 145s] -- Installing ./html/gssdp-Error-codes.html [ 145s] -- Installing ./html/gssdp.devhelp [ 145s] -- Installing ./html/gssdp.devhelp2 [ 145s] -- Installing ./html/home.png [ 145s] -- Installing ./html/index.html [ 145s] -- Installing ./html/index.sgml [ 145s] -- Installing ./html/left.png [ 145s] -- Installing ./html/right.png [ 145s] -- Installing ./html/style.css [ 145s] -- Installing ./html/up.png [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2/doc' [ 145s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] make[2]: Nothing to be done for `install-exec-am'. [ 145s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/pkgconfig" [ 145s] /usr/bin/install -c -m 644 gssdp-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/pkgconfig' [ 145s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2' [ 145s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/share/info/dir [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm -regex '.*\.la$' [ 145s] + xargs rm -f -- [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm -regex '.*\.a$' [ 145s] + xargs rm -f -- [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/share/ [ 145s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/share/license [ 145s] + cp COPYING /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/share/license/gssdp [ 145s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/gssdp-0.8.2_2 [ 145s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm/usr/lib/libgssdp-1.0.so.2.0.0 [ 145s] symlinked /usr/lib/debug/usr/lib/libgssdp-1.0.so.2.0.0.debug to /usr/lib/debug/usr/lib/libgssdp-1.0.so.2.debug [ 145s] symlinked /usr/lib/debug/usr/lib/libgssdp-1.0.so.2.0.0.debug to /usr/lib/debug/usr/lib/libgssdp-1.0.so.debug [ 145s] 268 blocks [ 145s] + /usr/lib/rpm/check-buildroot [ 145s] + /usr/lib/rpm//brp-compress [ 145s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 145s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 145s] + /usr/lib/rpm/brp-python-hardlink [ 145s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 145s] Processing files: gssdp-0.8.2_2-3.1.armv7l [ 145s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 145s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 145s] [ 145s] Provides: libgssdp-1.0.so.2 [ 145s] Requires(interp): /bin/sh /bin/sh [ 145s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 145s] Requires(post): /bin/sh [ 145s] Requires(postun): /bin/sh [ 145s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libgio-2.0.so.0 libglib-2.0.so.0 libgobject-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsoup-2.4.so.1 [ 145s] Processing files: gssdp-devel-0.8.2_2-3.1.armv7l [ 145s] Provides: pkgconfig(gssdp-1.0) = 0.8.2 [ 145s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 145s] Requires: /usr/bin/pkg-config libgssdp-1.0.so.2 pkgconfig(gobject-2.0) [ 145s] Processing files: gssdp-debuginfo-0.8.2_2-3.1.armv7l [ 145s] Processing files: gssdp-debugsource-0.8.2_2-3.1.armv7l [ 145s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 145s] Wrote: /home/abuild/rpmbuild/SRPMS/gssdp-0.8.2_2-3.1.src.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.8.2_2-3.1.armv7l.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.8.2_2-3.1.armv7l.rpm [ 145s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.8.2_2-3.1.armv7l.rpm [ 146s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.8.2_2-3.1.armv7l.rpm [ 146s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.MM1Nty [ 146s] + umask 022 [ 146s] + cd /home/abuild/rpmbuild/BUILD [ 146s] + cd gssdp-0.8.2_2 [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gssdp-0.8.2_2-3.1.arm [ 146s] + exit 0 [ 146s] ... checking for files with abuild user/group [ 146s] ... creating baselibs [ 146s] ... saving built statistics [ 146s] /.build/build: line 3144: mount: command not found [ 147s] ERROR: no root disk device found, yet another new device name? [ 147s] ls: cannot access /sys/block/: No such file or directory [ 147s] /.build/build: line 3159: umount: command not found [ 147s] ... saving built packages [ 147s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-0.8.2_2-3.1.armv7l.rpm [ 147s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debuginfo-0.8.2_2-3.1.armv7l.rpm [ 147s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-debugsource-0.8.2_2-3.1.armv7l.rpm [ 147s] /home/abuild/rpmbuild/RPMS/armv7l/gssdp-devel-0.8.2_2-3.1.armv7l.rpm [ 147s] /home/abuild/rpmbuild/SRPMS/gssdp-0.8.2_2-3.1.src.rpm [ 147s] /home/abuild/rpmbuild/OTHER/_statistics [ 147s] [ 147s] w09 finished "build gssdp.spec" at Wed Feb 4 12:46:21 UTC 2015. [ 147s] [ 153s] /.build/build: line 368: 220 Killed background_monitor_process [ 155s] [ 144.019927] SysRq : Power Off [ 155s] [ 144.128408] Power down. [ 155s] build: extracting built packages... [ 155s] gssdp-0.8.2_2-3.1.armv7l.rpm [ 155s] gssdp-debuginfo-0.8.2_2-3.1.armv7l.rpm [ 155s] gssdp-debugsource-0.8.2_2-3.1.armv7l.rpm [ 155s] gssdp-devel-0.8.2_2-3.1.armv7l.rpm [ 155s] gssdp-0.8.2_2-3.1.src.rpm [ 155s] _statistics Retried build at Thu Feb 5 21:15:35 2015 returned same result, skipped