[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:ise-engine-default.spec" at Wed Feb 4 14:19:28 UTC 2015. [ 0s] [ 0s] Building ise-engine-default for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'ba017604b51d465e7ba3da26ad731e9e' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:ise-engine-default.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:ise-engine-default.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:ise-engine-default.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 4s] cycle: libresourced -> system-resource [ 4s] breaking dependency libresourced -> system-resource [ 4s] cycle: libsensord -> sensord [ 4s] breaking dependency libsensord -> sensord [ 4s] cycle: pkgmgr-client -> pkgmgr-installer -> pkgmgr [ 4s] breaking dependency pkgmgr -> pkgmgr-client [ 4s] cycle: pkgmgr-installer -> pkgmgr [ 4s] breaking dependency pkgmgr -> pkgmgr-installer [ 4s] cycle: syspopup -> syspopup-caller [ 4s] breaking dependency syspopup -> syspopup-caller [ 4s] cycle: pulseaudio-libs -> pulseaudio [ 4s] breaking dependency pulseaudio -> pulseaudio-libs [ 4s] cycle: libalarm -> alarm-server [ 4s] breaking dependency alarm-server -> libalarm [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] cycle: system-resource -> system-resource-resourced [ 4s] breaking dependency system-resource-resourced -> system-resource [ 4s] done [ 8s] booting kvm ... [ 8s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 6 [ 11s] [ 0.000000] tsc: Fast TSC calibration failed [ 12s] doing fast boot [ 14s] Creating device nodes with udev [ 15s] Waiting for device /dev/vda to appear: ok [ 15s] fsck from util-linux 2.21.2 [ 15s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 15s] /dev/vda: clean, 4966/2392064 files, 245208/9568256 blocks [ 15s] fsck succeeded. Mounting root device read-write. [ 15s] Mounting root /dev/vda [ 15s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] switching personality to 8... [ 17s] 2nd stage started in virtual machine [ 17s] machine type: armv7l [ 17s] /.build/build: line 770: mount: command not found [ 17s] swapon on /dev/vdb [ 17s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 17s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 18s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 18s] logging output to //.build.log... [ 18s] processing specfile /.build-srcdir/_service:gbs:ise-engine-default.spec ... [ 18s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:ise-engine-default.spec build rpmlint-Factory ... [ 18s] running rpm-x86-arm postinstall script [ 19s] running rpm-libs-x86-arm postinstall script [ 19s] running tizen-accelerator postinstall script [ 19s] running bash-x86-arm postinstall script [ 19s] initializing rpm db... [ 26s] [1/283] installing cross-armv7l-platformfile-0.0.1-3.1 [ 26s] [2/283] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 28s] [3/283] installing libX11-common-1.5.0-3.1 [ 35s] [4/283] installing tizen-release-2.2.0-3.1 [ 36s] [5/283] installing tzdata-2013h-3.1 [ 36s] [6/283] installing libgcc-4.6.4-3.14 [ 37s] [7/283] installing setup-0.1-3.1 [ 37s] [8/283] installing filesystem-0.1-3.1 [ 39s] warning: group lock does not exist - using root [ 39s] [9/283] installing eglibc-2.13-3.9 [ 40s] [10/283] installing libstdc++-4.6.4-3.14 [ 41s] [11/283] installing eglibc-common-2.13-3.9 [ 42s] [12/283] installing iniparser-2.17-3.1 [ 42s] [13/283] installing libstdc++-devel-4.6.4-3.14 [ 42s] [14/283] installing opengl-es-virtual-drv-0.1.6-3.2 [ 42s] [15/283] installing bash-4.1-3.1 [ 42s] [16/283] installing bzip2-libs-1.0.5-3.2 [ 43s] [17/283] installing c-ares-1.10.0_4-3.1 [ 43s] [18/283] installing capi-base-common-0.1.7-3.1 [ 43s] [19/283] installing cpio-2.8-3.1 [ 44s] [20/283] installing diffutils-3.0-3.1 [ 44s] [21/283] installing e2fsprogs-libs-1.41.9-3.1 [ 45s] [22/283] installing elfutils-libelf-0.152-3.8 [ 45s] [23/283] installing embryo-1.6.0+svn.76491slp2+build07-5.1 [ 45s] [24/283] installing expat-2.0.1-3.2 [ 46s] [25/283] installing fdupes-1.40-3.1 [ 46s] [26/283] installing findutils-4.2.31-3.1 [ 63s] [27/283] installing fribidi-0.19.6-3.1 [ 64s] [28/283] installing gdbm-1.8.3-3.3 [ 64s] [29/283] installing libXau-1.0.7-3.1 [ 64s] [30/283] installing libasound-1.0.25-1.0.25-2.1 [ 64s] [31/283] installing libattr-2.4.44-3.4 [ 64s] [32/283] installing libdrm2-2.4.35-3.1 [ 65s] [33/283] installing libffi-3.0.9-3.1 [ 65s] [34/283] installing libflac-1.2.1+slp2+build04-3.1 [ 65s] [35/283] installing libgomp-4.6.4-3.14 [ 66s] [36/283] installing libidn-1.15-3.1 [ 66s] [37/283] installing libjpeg-turbo-1.2.0-3.1 [ 67s] [38/283] installing libjson-0.10.1-2.1 [ 67s] [39/283] installing liblua-5.1.4-3.2 [ 67s] [40/283] installing libogg-1.2.1-3.1 [ 68s] [41/283] installing libtool-ltdl-2.2.6b-3.2 [ 68s] [42/283] installing libunwind-1.1-3.2 [ 69s] [43/283] installing libuuid-2.20.2-3.1 [ 69s] [44/283] installing lzo-2.03-3.3 [ 70s] [45/283] installing m4-1.4.14-3.1 [ 70s] [46/283] installing net-tools-1.60-3.1 [ 70s] [47/283] installing nspr-4.9-3.6 [ 71s] [48/283] installing nss-softokn-freebl-3.12.9-3.11 [ 71s] [49/283] installing openssl-1.0.1k-3.2 [ 72s] [50/283] installing patch-2.6-3.1 [ 72s] [51/283] installing pixman-0.28.2-3.1 [ 72s] [52/283] installing pkg-config-0.25-2.2 [ 73s] [53/283] installing popt-1.16-3.2 [ 73s] [54/283] installing readline-5.2-3.2 [ 73s] [55/283] installing sed-4.1.5-3.1 [ 73s] [56/283] installing smack-1.0+s14-3.2 [ 74s] [57/283] installing speex-1.2rc1-3.1 [ 74s] [58/283] installing sqlite-3.7.13-3.2 [ 74s] [59/283] installing systemd-libs-210-7.1 [ 75s] [60/283] installing tar-1.17-3.2 [ 75s] [61/283] installing xz-libs-5.0.3-3.3 [ 75s] [62/283] installing zlib-1.2.5-3.8 [ 76s] [63/283] installing gmp-4.2.1-3.2 [ 76s] [64/283] installing libpcre-7.7-3.3 [ 76s] [65/283] installing ncurses-libs-5.7-3.2 [ 76s] [66/283] installing build-compare-2009.10.14-3.5 [ 76s] [67/283] installing qemu.x86_64-1.2-5.1 [ 83s] [68/283] installing eglibc-headers-2.13-3.9 [ 83s] [69/283] installing libcap-2.21-3.2 [ 84s] [70/283] installing unzip-6.0-3.4 [ 84s] [71/283] installing zlib-devel-1.2.5-3.8 [ 85s] [72/283] installing freetype-2.4.9-3.1 [ 85s] [73/283] installing grep-2.5.1a-3.1 [ 87s] [74/283] installing libacl-2.2.49-3.2 [ 87s] [75/283] installing libfile-5.04-3.2 [ 89s] [76/283] installing libiri-1.7-3.1 [ 90s] [77/283] installing libpng-1.2.50-3.1 [ 90s] [78/283] installing libvorbis-1.2.3-3.1 [ 91s] [79/283] installing libxcb-1.8.1-3.1 [ 92s] [80/283] installing libxml2-2.7.8-3.2 [ 93s] [81/283] installing lzo-minilzo-2.03-3.3 [ 93s] [82/283] installing make-3.82-3.2 [ 96s] [83/283] installing minizip-1.2.5-3.8 [ 96s] [84/283] installing mpfr-3.0.0-3.2 [ 97s] [85/283] installing ncurses-5.7-3.2 [ 97s] [86/283] installing psmisc-22.20-3.2 [ 97s] [87/283] installing bzip2-1.0.5-3.2 [ 98s] [88/283] installing glib2-2.32.3-3.1 [ 98s] [89/283] installing kmod-libs-15-3.1 [ 98s] [90/283] installing libblkid-2.20.2-3.1 [ 98s] [91/283] installing libicu-51-3.1 [ 99s] [92/283] installing smack-utils-1.0+s14-3.2 [ 100s] [93/283] installing xz-5.0.3-3.3 [ 100s] [94/283] installing binutils-2.22-3.4 [ 100s] [95/283] installing elfutils-libs-0.152-3.8 [ 101s] [96/283] installing libcurl-7.28.1_26-3.1 [ 101s] [97/283] installing nss-3.12.9-3.11 [ 101s] [98/283] installing perl-5.12.1-3.3 [ 125s] [99/283] installing ncurses-base-5.7-3.2 [ 128s] [100/283] installing perl-HTML-Tagset-3.20-3.1 [ 129s] [101/283] installing perl-IO-Compress-Base-2.008-3.3 [ 129s] [102/283] installing perl-Module-Pluggable-3.60-3.3 [ 131s] [103/283] installing perl-Pod-Escapes-1.04-3.3 [ 132s] [104/283] installing perl-TimeDate-1.20-3.1 [ 133s] [105/283] installing eglibc-devel-2.13-3.9 [ 134s] [106/283] installing smack-privilege-config-1.0.8-3.1 [ 134s] /var/tmp/rpm-tmp.5pRLTe: line 2: which: command not found [ 134s] api_feature_loader not present [ 134s] [107/283] installing svi-data-0.1.3-3.1 [ 135s] [108/283] installing file-5.04-3.2 [ 135s] [109/283] installing lzo-devel-2.03-3.3 [ 137s] [110/283] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 138s] [111/283] installing perl-devel-5.12.1-3.3 [ 139s] [112/283] installing perl-libs-5.12.1-3.3 [ 140s] [113/283] installing coreutils-6.9-3.3 [ 141s] [114/283] installing libX11-1.5.0-3.1 [ 143s] [115/283] installing libdlog-0.4.1-3.1 [ 145s] [116/283] installing libmount-2.20.2-3.1 [ 146s] [117/283] installing mpc-0.9-3.2 [ 147s] [118/283] installing xz-lzma-compat-5.0.3-3.3 [ 147s] [119/283] installing elfutils-0.152-3.8 [ 148s] [120/283] installing harfbuzz-0.9.7-3.1 [ 149s] [121/283] installing nss-sysinit-3.12.9-3.11 [ 150s] [122/283] installing shared-mime-info-0.60-3.1 [ 160s] [123/283] installing libsndfile-1.0.28-3.1 [ 160s] [124/283] installing rpm-libs-4.9.1-4.1 [ 161s] [125/283] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 161s] [126/283] installing perl-Pod-Simple-3.07-3.3 [ 161s] [127/283] installing perl-Test-Simple-0.80-3.3 [ 163s] [128/283] installing tizen-accelerator-1.0.1-3.1 [ 164s] [129/283] installing eina-1.7.1+svn.77445+build35-3.1 [ 175s] [130/283] installing giflib-4.1.6-3.1 [ 175s] [131/283] installing libXcomposite-0.4.4-3.1 [ 175s] [132/283] installing libXdamage-1.1.3-3.1 [ 175s] [133/283] installing libXext-1.3.1-3.1 [ 176s] [134/283] installing libXfixes-5.0-3.1 [ 176s] [135/283] installing libXrender-0.9.7-3.1 [ 176s] [136/283] installing libremix-0.2.4+build14-3.1 [ 176s] [137/283] installing libtremolo-0.0.11-3.1 [ 177s] [138/283] installing perl-IO-Compress-Zlib-2.008-3.3 [ 178s] [139/283] installing perl-Test-Harness-3.12-3.3 [ 178s] [140/283] installing gawk-3.1.5-3.2 [ 179s] [141/283] installing gzip-1.3.12-3.1 [ 179s] [142/283] installing libcryptsvc-0.0.1-3.1 [ 179s] [143/283] installing xdgmime-0.0.12-3.1 [ 180s] [144/283] installing build-2011.01.10a-3.1 [ 180s] [145/283] installing bundle-0.1.35-3.1 [ 181s] [146/283] installing libcom-core-0.7.0-3.1 [ 182s] [147/283] installing rpm-4.9.1-4.1 [ 182s] [148/283] installing cpp-4.6.4-3.14 [ 183s] [149/283] installing libslp-db-util-0.1.8-3.1 [ 183s] [150/283] installing sys-assert-0.3.2-3.1 [ 183s] [151/283] installing dbus-1.6.4-3.1 [ 183s] [152/283] installing util-linux-2.20.2-3.1 [ 184s] [153/283] installing fontconfig-2.9.0-3.1 [ 186s] /opt/var/cache/fontconfig/*: No such file or directory [ 186s] [154/283] installing libprivilege-control-0.0.89-3.1 [ 191s] Applying sql update files on db [ 191s] /opt/dbspace/.rules-db.db3 [ 191s] Creating database from scratch [ 191s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 191s] Done. [ 191s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 191s] Done. [ 191s] [155/283] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 192s] [156/283] installing dbus-libs-1.6.4-3.1 [ 192s] [157/283] installing eglibc-x86-arm-2.13-2.3 [ 196s] [158/283] installing elfutils-libelf-x86-arm-0.152-2.1 [ 196s] [159/283] installing elfutils-libs-x86-arm-0.152-2.3 [ 197s] [160/283] installing gmp-x86-arm-4.2.1-2.1 [ 198s] [161/283] installing libacl-x86-arm-2.2.49-2.1 [ 198s] [162/283] installing libattr-x86-arm-2.4.44-2.1 [ 199s] [163/283] installing libcap-x86-arm-2.21-2.1 [ 199s] [164/283] installing libfile-x86-arm-5.04-2.2 [ 200s] [165/283] installing libgcc-x86-arm-4.6.4-2.1 [ 200s] [166/283] installing liblua-x86-arm-5.1.4-2.1 [ 201s] [167/283] installing mpc-x86-arm-0.9-2.1 [ 201s] [168/283] installing mpfr-x86-arm-3.0.0-2.1 [ 202s] [169/283] installing ncurses-libs-x86-arm-5.7-2.2 [ 202s] [170/283] installing nspr-x86-arm-4.9-2.3 [ 202s] [171/283] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 202s] [172/283] installing nss-x86-arm-3.12.9-2.3 [ 203s] [173/283] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 204s] [174/283] installing popt-x86-arm-1.16-2.1 [ 204s] [175/283] installing rpm-libs-x86-arm-4.9.1-2.2 [ 205s] [176/283] installing sqlite-x86-arm-3.7.13-2.1 [ 205s] [177/283] installing xz-libs-x86-arm-5.0.3-2.1 [ 206s] [178/283] installing zlib-x86-arm-1.2.5-2.1 [ 206s] [179/283] installing ecore-1.7.1+svn.77580+build125-5.1 [ 206s] [180/283] installing libXgesture-0.1.1-3.1 [ 206s] [181/283] installing libXi-1.6.1-3.1 [ 207s] [182/283] installing libXinerama-1.1.2-3.1 [ 207s] [183/283] installing libXtst-1.2.0-3.1 [ 207s] [184/283] installing libXv-1.0.7-3.1 [ 207s] [185/283] installing libdri2-0.1.0-3.1 [ 207s] [186/283] installing eet-1.7.1+svn.77495+build14-5.1 [ 208s] [187/283] installing libXcursor-1.1.13-3.1 [ 208s] [188/283] installing libXrandr-1.4.0-3.1 [ 209s] [189/283] installing librua-0.1.8-3.1 [ 209s] [190/283] installing capi-system-info-0.2.0-3.1 [ 209s] [191/283] installing systemd-210-7.1 [ 211s] [192/283] installing gcc-4.6.4-3.14 [ 213s] [193/283] installing cairo-1.12.14-3.1 [ 213s] [194/283] installing rpm-build-4.9.1-4.1 [ 214s] [195/283] installing libjournal-0.1.0-2.1 [ 214s] [196/283] installing perl-CPAN-1.9205-3.3 [ 215s] [197/283] installing bash-x86-arm-4.1-2.1 [ 216s] [198/283] installing dbus-glib-0.100-3.1 [ 216s] [199/283] installing ecore-imf-1.7.1+svn.77580+build125-5.1 [ 217s] [200/283] installing ecore-input-1.7.1+svn.77580+build125-5.1 [ 217s] [201/283] installing fdupes-x86-arm-1.40-2.1 [ 218s] [202/283] installing findutils-x86-arm-4.2.31-2.1 [ 219s] [203/283] installing gawk-x86-arm-3.1.5-2.2 [ 224s] [204/283] installing gzip-x86-arm-1.3.12-2.1 [ 224s] [205/283] installing make-x86-arm-3.82-2.1 [ 225s] [206/283] installing sed-x86-arm-4.1.5-2.1 [ 225s] [207/283] installing tar-x86-arm-1.17-2.2 [ 226s] [208/283] installing diffutils-x86-arm-3.0-2.1 [ 226s] [209/283] installing patch-x86-arm-2.6-2.1 [ 227s] [210/283] installing autoconf-2.68-3.1 [ 229s] [211/283] installing coreutils-x86-arm-6.9-2.1 [ 231s] [212/283] installing ecore-con-1.7.1+svn.77580+build125-5.1 [ 231s] [213/283] installing file-x86-arm-5.04-2.1 [ 231s] [214/283] installing libslp-utilx-0.4.5-3.1 [ 254s] [215/283] installing libtbm-1.1.1-3.1 [ 254s] [216/283] installing vconf-0.2.83-3.1 [ 255s] Failed to get D-Bus connection: Unknown error 4294967295 [ 255s] warning: %post(vconf-0.2.83-3.1.armv7l) scriptlet failed, exit status 1 [ 255s] [217/283] installing bluez-5.16_8-3.1 [ 256s] [218/283] installing elfutils-x86-arm-0.152-2.3 [ 257s] [219/283] installing gcc-c++-4.6.4-3.14 [ 259s] [220/283] installing security-server-0.0.125-3.1 [ 260s] Failed to get D-Bus connection: Unknown error 4294967295 [ 260s] Failed to get D-Bus connection: Unknown error 4294967295 [ 260s] [221/283] installing evas-1.7.1+svn.77561+build187-5.1 [ 260s] [222/283] installing rpm-x86-arm-4.9.1-2.2 [ 263s] /bin/rpm.orig-arm already present - skipping. [ 263s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 263s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 263s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 263s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 263s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 263s] [223/283] installing rpm-build-x86-arm-4.9.1-2.2 [ 263s] [224/283] installing automake-1.11.1-3.1 [ 264s] [225/283] installing ecore-fb-1.7.1+svn.77580+build125-5.1 [ 264s] [226/283] installing ecore-file-1.7.1+svn.77580+build125-5.1 [ 265s] [227/283] installing ecore-imf-evas-1.7.1+svn.77580+build125-5.1 [ 265s] [228/283] installing ecore-ipc-1.7.1+svn.77580+build125-5.1 [ 265s] [229/283] installing libsecurity-server-client-0.0.125-3.1 [ 265s] [230/283] installing audio-session-manager-0.4.6-3.1 [ 265s] [231/283] installing ecore-input-evas-1.7.1+svn.77580+build125-5.1 [ 265s] [232/283] installing edbus-1.6.0+svn.76526slp2+build10-3.1 [ 266s] [233/283] installing libsensord-1.1.17-3.1 [ 266s] [234/283] installing ail-0.2.95-3.1 [ 266s] [235/283] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 273s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 273s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 274s] [236/283] installing pkgmgr-info-0.0.230-3.1 [ 274s] [237/283] installing ecore-x-1.7.1+svn.77580+build125-5.1 [ 275s] [238/283] installing libtool-2.2.6b-3.2 [ 276s] [239/283] installing capi-security-privilege-manager-0.0.3-3.1 [ 278s] [240/283] installing libmm-session-0.4.16-3.1 [ 278s] [241/283] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 280s] [242/283] installing efreet-1.7.1+svn.77412+build14-3.1 [ 280s] [243/283] installing sensord-1.1.17-3.1 [ 280s] [244/283] installing libresourced-0.2.86-3.1 [ 281s] [245/283] installing pkgmgr-info-parser-0.0.230-3.1 [ 282s] [246/283] installing ecore-evas-1.7.1+svn.77580+build125-5.1 [ 282s] [247/283] installing privacy-manager-server-0.0.6-3.1 [ 283s] Check privacy DB [ 283s] Create privacy DB [ 283s] persist [ 283s] [248/283] installing pulseaudio-4.0.145-7.1 [ 283s] Failed to get D-Bus connection: Unknown error 4294967295 [ 283s] Failed to get D-Bus connection: Unknown error 4294967295 [ 283s] warning: %post(pulseaudio-4.0.145-7.1.armv7l) scriptlet failed, exit status 1 [ 284s] [249/283] installing pulseaudio-libs-4.0.145-7.1 [ 284s] [250/283] installing edje-1.7.1+svn.77330+build179-3.1 [ 284s] [251/283] installing system-resource-resourced-0.2.86-3.1 [ 286s] [252/283] installing aul-0.2.3.0-3.1 [ 286s] [253/283] installing system-resource-0.2.86-3.1 [ 286s] [254/283] installing app-core-common-1.3.40-3.1 [ 287s] [255/283] installing ethumb-1.6.0+svn.75994slp2+build09-3.1 [ 287s] [256/283] installing app-svc-0.1.78-3.1 [ 287s] persist [ 287s] [257/283] installing alarm-server-0.4.163-3.1 [ 289s] [258/283] installing elementary-1.7.1+svn.77535+build567-3.1 [ 289s] [259/283] installing libalarm-0.4.163-3.1 [ 290s] [260/283] installing app-core-efl-1.3.40-3.1 [ 290s] [261/283] installing syspopup-0.0.134-3.1 [ 290s] [262/283] installing capi-media-tool-0.1.1-2.1 [ 291s] [263/283] installing bluetooth-frwk-0.2.146-3.1 [ 314s] [264/283] installing capi-appfw-application-0.3.1.0-3.1 [ 315s] [265/283] installing syspopup-caller-0.0.134-3.1 [ 316s] [266/283] installing pkgmgr-0.3.37-3.1 [ 333s] [PKG_INITDB][D] ========================================================================= [ 333s] [PKG_INITDB][D] install manifest=[/usr/share/packages/com.samsung.pkgmgr-install.xml] [ 333s] [PKG_INITDB][D] corexml is installed, time=[4]ms [ 333s] [PKG_INITDB][D] try to apply smack [ 333s] [PKG_INITDB][D] smack is applied, time=[2]ms [ 333s] [PKG_INITDB][D] try to apply privileges [ 333s] [PKG_INITDB][D] privileges are applied, time=[1]ms [ 333s] [PKG_INITDB][D] ------------------------------------------------------ [ 333s] [PKG_INITDB][D] done [ 333s] [PKG_INITDB][D] ------------------------------------------------------ [ 333s] [PKG_INITDB][D] manifest xml=[/usr/share/packages/com.samsung.pkgmgr-install.xml] [ 333s] [PKG_INITDB][D] package id=[com.samsung.pkgmgr-install] [ 333s] [PKG_INITDB][D] time=[7]ms [ 333s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 333s] [PKG_INITDB][D] package manager db init for manifest xml, directory=[/usr/share/packages] [ 333s] [PKG_INITDB][D] package total count : 1 [ 333s] [PKG_INITDB][D] Time for db init : 0 sec [ 333s] [PKG_INITDB][D] time for smack : 0 sec [ 333s] [PKG_INITDB][D] time for privilege : 0 sec [ 333s] [PKG_INITDB][D] time for total process : 0 sec [ 333s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 333s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 333s] [PKG_INITDB][D] package manager db init for manifest xml, directory=[/opt/share/packages] [ 333s] [PKG_INITDB][D] package total count : 0 [ 333s] [PKG_INITDB][D] Time for db init : 0 sec [ 333s] [PKG_INITDB][D] time for smack : 0 sec [ 333s] [PKG_INITDB][D] time for privilege : 0 sec [ 333s] [PKG_INITDB][D] time for total process : 0 sec [ 333s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 333s] [PKG_INITDB][D] apply smack pkgid : ui-gadget::client [ 333s] [PKG_INITDB][D] apply smack pkgid : e17 [ 333s] [PKG_INITDB][E] FAIL : chown /opt/dbspace/.pkgmgr_parser.db 0.0, because ðÇ0ö [ 333s] [PKG_INITDB][E] cannot chown. [ 333s] /opt/dbspace/.pkgmgr_cert.db-journal: No such file or directory [ 333s] [PKG_INITDB][D] ================================================================ [ 333s] [PKG_INITDB][D] Package-Manager initializing start : Wed Feb 4 09:24:44 2015 [ 333s] [PKG_INITDB][D] Package-Manager initializing end : Wed Feb 4 09:24:45 2015 [ 333s] [PKG_INITDB][D] ================================================================ [ 333s] [PKG_INITDB][D] ================== Installed package list ===================== [ 333s] [PKG_INITDB][E] cannot get_list. [ 333s] [PKG_INITDB][D] ================================================================ [ 333s] [PKG_INITDB][E] Insert for app-aliasID DB failed [ 333s] /usr/etc/package-manager/pkg_path.conf: No such file or directory [ 333s] The list of removed files has saved at /usr/share/removed-file.lst [ 335s] [267/283] installing libmm-utility-0.31-3.1 [ 337s] [268/283] installing pkgmgr-installer-0.3.37-3.1 [ 339s] [269/283] installing notification-0.2.23-3.1 [ 339s] persist [ 340s] [270/283] installing capi-media-image-util-0.1.2-3.1 [ 340s] [271/283] installing pkgmgr-client-0.3.37-3.1 [ 340s] [272/283] installing capi-appfw-app-manager-0.2.4-3.1 [ 340s] [273/283] installing capi-appfw-package-manager-0.0.49-3.1 [ 340s] [274/283] installing privacy-manager-client-0.0.6-3.1 [ 341s] [275/283] installing capi-network-bluetooth-0.1.52-3.1 [ 341s] [276/283] installing libmm-sound-0.9.182-3.1 [ 342s] [277/283] installing capi-media-audio-io-0.2.27-3.1 [ 342s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 342s] Done. [ 343s] [278/283] installing capi-media-sound-manager-0.2.26-3.1 [ 343s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 343s] Done. [ 343s] [279/283] installing libfeedback-0.1.3-3.1 [ 343s] [280/283] installing tts-0.2.41-3.1 [ 343s] [281/283] installing efl-assist-0.1.143-3.1 [ 344s] [282/283] installing isf-2.4.8317-3.1 [ 345s] [283/283] installing isf-devel-2.4.8317-3.1 [ 345s] removing nis flags from //etc/nsswitch.conf... [ 345s] now finalizing build dir... [ 345s] /.build/build: line 2585: mount: command not found [ 345s] /.build/build: line 2586: mount: command not found [ 350s] build target is armv7l-tizen-linux [ 350s] ----------------------------------------------------------------- [ 350s] I have the following modifications for ise-engine-default.spec: [ 350s] 5c5 [ 350s] < Release: 7 [ 350s] --- [ 350s] > Release: 3.1 [ 350s] 35a36 [ 350s] > %changelog [ 350s] ----------------------------------------------------------------- [ 350s] ----- building ise-engine-default.spec (user abuild) [ 350s] ----------------------------------------------------------------- [ 350s] ----------------------------------------------------------------- [ 350s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/ba017604b51d465e7ba3da26ad731e9e-ise-engine-default' /home/abuild/rpmbuild/SOURCES/ise-engine-default.spec [ 350s] Building target platforms: armv7l-tizen-linux [ 350s] Building for target armv7l-tizen-linux [ 350s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.vh02AK [ 350s] + umask 022 [ 350s] + cd /home/abuild/rpmbuild/BUILD [ 350s] + LANG=C [ 350s] + export LANG [ 350s] + unset DISPLAY [ 350s] + cd /home/abuild/rpmbuild/BUILD [ 350s] + rm -rf ise-engine-default-0.1.5024 [ 350s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-default-0.1.5024.tar.gz [ 350s] + /bin/tar -xf - [ 350s] + STATUS=0 [ 350s] + '[' 0 -ne 0 ']' [ 350s] + cd ise-engine-default-0.1.5024 [ 350s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 350s] + exit 0 [ 350s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.CIMkzz [ 350s] + umask 022 [ 350s] + cd /home/abuild/rpmbuild/BUILD [ 350s] + cd ise-engine-default-0.1.5024 [ 350s] + LANG=C [ 350s] + export LANG [ 350s] + unset DISPLAY [ 350s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 350s] + export CFLAGS [ 350s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 350s] + export CXXFLAGS [ 350s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 350s] + export FFLAGS [ 350s] + LD_AS_NEEDED=1 [ 350s] + export LD_AS_NEEDED [ 350s] + ./bootstrap [ 350s] + libtoolize --force [ 350s] libtoolize: putting auxiliary files in `.'. [ 350s] libtoolize: linking file `./ltmain.sh' [ 350s] libtoolize: putting auxiliary files in `.'. [ 350s] libtoolize: linking file `libltdl/config/compile' [ 350s] libtoolize: linking file `libltdl/config/config.guess' [ 350s] libtoolize: linking file `libltdl/config/config.sub' [ 350s] libtoolize: linking file `libltdl/config/depcomp' [ 350s] libtoolize: linking file `libltdl/config/install-sh' [ 350s] libtoolize: linking file `libltdl/config/missing' [ 350s] libtoolize: linking file `libltdl/config/ltmain.sh' [ 350s] libtoolize: putting macros in `m4'. [ 350s] libtoolize: linking file `m4/argz.m4' [ 350s] libtoolize: linking file `m4/libtool.m4' [ 350s] libtoolize: linking file `m4/ltdl.m4' [ 350s] libtoolize: linking file `m4/ltoptions.m4' [ 350s] libtoolize: linking file `m4/ltsugar.m4' [ 350s] libtoolize: linking file `m4/ltversion.m4' [ 351s] libtoolize: linking file `m4/lt~obsolete.m4' [ 351s] libtoolize: putting macros in `libltdl/m4'. [ 351s] libtoolize: linking file `libltdl/m4/argz.m4' [ 351s] libtoolize: linking file `libltdl/m4/libtool.m4' [ 351s] libtoolize: linking file `libltdl/m4/ltdl.m4' [ 351s] libtoolize: linking file `libltdl/m4/ltoptions.m4' [ 351s] libtoolize: linking file `libltdl/m4/ltsugar.m4' [ 351s] libtoolize: linking file `libltdl/m4/ltversion.m4' [ 351s] libtoolize: linking file `libltdl/m4/lt~obsolete.m4' [ 351s] libtoolize: putting libltdl files in `libltdl'. [ 351s] libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' [ 351s] + aclocal -I ./m4 [ 367s] + autoheader [ 374s] + libtoolize -c --automake [ 375s] libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' [ 375s] + automake --add-missing --copy --include-deps [ 379s] configure.ac:31: installing `./config.guess' [ 379s] configure.ac:31: installing `./config.sub' [ 379s] configure.ac:21: installing `./install-sh' [ 379s] configure.ac:21: installing `./missing' [ 379s] src/Makefile.am: installing `./depcomp' [ 380s] Makefile.am: installing `./INSTALL' [ 380s] Makefile.am: installing `./COPYING' using GNU General Public License v3 file [ 380s] Makefile.am: Consider adding the COPYING file to the version control system [ 380s] Makefile.am: for your code, to avoid questions about which license your project uses. [ 381s] + autoconf [ 388s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 388s] + export CFLAGS [ 388s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 388s] + export CXXFLAGS [ 388s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 388s] + export FFLAGS [ 388s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 388s] + libtoolize --force [ 388s] libtoolize: putting auxiliary files in `.'. [ 388s] libtoolize: linking file `./ltmain.sh' [ 388s] libtoolize: putting auxiliary files in `.'. [ 388s] libtoolize: linking file `libltdl/config/compile' [ 388s] libtoolize: linking file `libltdl/config/config.guess' [ 388s] libtoolize: linking file `libltdl/config/config.sub' [ 388s] libtoolize: linking file `libltdl/config/depcomp' [ 388s] libtoolize: linking file `libltdl/config/install-sh' [ 388s] libtoolize: linking file `libltdl/config/missing' [ 388s] libtoolize: linking file `libltdl/config/ltmain.sh' [ 388s] libtoolize: putting macros in `m4'. [ 388s] libtoolize: linking file `m4/argz.m4' [ 388s] libtoolize: linking file `m4/libtool.m4' [ 388s] libtoolize: linking file `m4/ltdl.m4' [ 388s] libtoolize: linking file `m4/ltoptions.m4' [ 388s] libtoolize: linking file `m4/ltsugar.m4' [ 389s] libtoolize: linking file `m4/ltversion.m4' [ 389s] libtoolize: linking file `m4/lt~obsolete.m4' [ 389s] libtoolize: putting macros in `libltdl/m4'. [ 389s] libtoolize: linking file `libltdl/m4/argz.m4' [ 389s] libtoolize: linking file `libltdl/m4/libtool.m4' [ 389s] libtoolize: linking file `libltdl/m4/ltdl.m4' [ 389s] libtoolize: linking file `libltdl/m4/ltoptions.m4' [ 389s] libtoolize: linking file `libltdl/m4/ltsugar.m4' [ 389s] libtoolize: linking file `libltdl/m4/ltversion.m4' [ 389s] libtoolize: linking file `libltdl/m4/lt~obsolete.m4' [ 389s] libtoolize: putting libltdl files in `libltdl'. [ 389s] libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' [ 389s] + aclocal -I ./m4 [ 401s] + autoheader [ 404s] + libtoolize -c --automake [ 405s] libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' [ 405s] + automake --add-missing --copy --include-deps [ 411s] + autoconf [ 413s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 413s] + export CFLAGS [ 413s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 413s] + export CXXFLAGS [ 413s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 413s] + export FFLAGS [ 413s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 413s] checking for a BSD-compatible install... /usr/bin/install -c [ 414s] checking whether build environment is sane... yes [ 414s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 414s] checking for gawk... gawk [ 414s] checking whether make sets $(MAKE)... yes [ 414s] ./configure: line 3148: PLATFORM_INIT: command not found [ 414s] checking build system type... armv7l-unknown-linux-gnueabi [ 414s] checking host system type... armv7l-unknown-linux-gnueabi [ 414s] checking for style of include used by make... GNU [ 414s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 414s] checking for gcc... gcc [ 414s] checking whether the C compiler works... yes [ 414s] checking for C compiler default output file name... a.out [ 414s] checking for suffix of executables... [ 414s] checking whether we are cross compiling... no [ 414s] checking for suffix of object files... o [ 414s] checking whether we are using the GNU C compiler... yes [ 414s] checking whether gcc accepts -g... yes [ 414s] checking for gcc option to accept ISO C89... none needed [ 415s] checking dependency style of gcc... gcc3 [ 415s] checking for a sed that does not truncate output... /bin/sed [ 415s] checking for grep that handles long lines and -e... /bin/grep [ 415s] checking for egrep... /bin/grep -E [ 415s] checking for fgrep... /bin/grep -F [ 415s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 415s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 415s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 415s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 415s] checking whether ln -s works... yes [ 415s] checking the maximum length of command line arguments... 1572864 [ 415s] checking whether the shell understands some XSI constructs... yes [ 415s] checking whether the shell understands "+="... yes [ 415s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 415s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 415s] checking for objdump... objdump [ 415s] checking how to recognize dependent libraries... pass_all [ 415s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 415s] checking for ar... ar [ 415s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 415s] checking for strip... strip [ 415s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 415s] checking for ranlib... ranlib [ 415s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 415s] checking how to run the C preprocessor... gcc -E [ 415s] checking for ANSI C header files... yes [ 415s] checking for sys/types.h... yes [ 415s] checking for sys/stat.h... yes [ 415s] checking for stdlib.h... yes [ 415s] checking for string.h... yes [ 415s] checking for memory.h... yes [ 415s] checking for strings.h... yes [ 415s] checking for inttypes.h... yes [ 415s] checking for stdint.h... yes [ 415s] checking for unistd.h... yes [ 415s] checking for dlfcn.h... yes [ 415s] checking for objdir... .libs [ 415s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 415s] checking for gcc option to produce PIC... -fPIC -DPIC [ 415s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 415s] checking if gcc static flag -static works... no [ 415s] checking if gcc supports -c -o file.o... yes [ 415s] checking if gcc supports -c -o file.o... (cached) yes [ 416s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 416s] checking whether -lc should be explicitly linked in... no [ 416s] checking dynamic linker characteristics... GNU/Linux ld.so [ 416s] checking how to hardcode library paths into programs... immediate [ 416s] checking for shl_load... no [ 416s] checking for shl_load in -ldld... no [ 416s] checking for dlopen... no [ 416s] checking for dlopen in -ldl... yes [ 416s] checking whether a program can dlopen itself... yes [ 416s] checking whether a statically linked program can dlopen itself... yes [ 416s] checking whether stripping libraries is possible... yes [ 416s] checking if libtool supports shared libraries... yes [ 416s] checking whether to build shared libraries... yes [ 416s] checking whether to build static libraries... no [ 416s] checking which extension is used for runtime loadable modules... .so [ 416s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 416s] checking for the default library search path... /lib /usr/lib /emul/ia32-linux/usr/x86_64-tizen-linux/lib64 /emul/ia32-linux/usr/i586-tizen-linux/lib /emul/ia32-linux/usr/local/lib64 /emul/ia32-linux/usr/local/lib /emul/ia32-linux/lib64 /emul/ia32-linux/lib /emul/ia32-linux/usr/lib64 /emul/ia32-linux/usr/lib [ 416s] checking for library containing dlopen... -ldl [ 416s] checking for dlerror... yes [ 416s] checking for shl_load... (cached) no [ 416s] checking for shl_load in -ldld... (cached) no [ 416s] checking for dld_link in -ldld... no [ 416s] checking for _ prefix in compiled symbols... no [ 416s] checking whether deplibs are loaded by dlopen... yes [ 416s] checking for argz.h... yes [ 416s] checking for error_t... yes [ 416s] checking for argz_add... yes [ 416s] checking for argz_append... yes [ 416s] checking for argz_count... yes [ 416s] checking for argz_create_sep... yes [ 416s] checking for argz_insert... yes [ 416s] checking for argz_next... yes [ 416s] checking for argz_stringify... yes [ 416s] checking if argz actually works... yes [ 416s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 417s] checking for ltdl.h... no [ 417s] checking where to find libltdl headers... -I${top_srcdir}/libltdl [ 417s] checking where to find libltdl library... ${top_build_prefix}libltdl/libltdlc.la [ 417s] checking for unistd.h... (cached) yes [ 417s] checking for dl.h... no [ 417s] checking for sys/dl.h... no [ 417s] checking for dld.h... no [ 417s] checking for mach-o/dyld.h... no [ 417s] checking for dirent.h... yes [ 417s] checking for closedir... yes [ 417s] checking for opendir... yes [ 417s] checking for readdir... yes [ 417s] checking for strlcat... no [ 417s] checking for strlcpy... no [ 417s] checking for armv7l-unknown-linux-gnueabi-g++... no [ 417s] checking for armv7l-unknown-linux-gnueabi-c++... no [ 417s] checking for armv7l-unknown-linux-gnueabi-gpp... no [ 417s] checking for armv7l-unknown-linux-gnueabi-aCC... no [ 417s] checking for armv7l-unknown-linux-gnueabi-CC... no [ 417s] checking for armv7l-unknown-linux-gnueabi-cxx... no [ 417s] checking for armv7l-unknown-linux-gnueabi-cc++... no [ 417s] checking for armv7l-unknown-linux-gnueabi-cl.exe... no [ 417s] checking for armv7l-unknown-linux-gnueabi-FCC... no [ 417s] checking for armv7l-unknown-linux-gnueabi-KCC... no [ 417s] checking for armv7l-unknown-linux-gnueabi-RCC... no [ 417s] checking for armv7l-unknown-linux-gnueabi-xlC_r... no [ 417s] checking for armv7l-unknown-linux-gnueabi-xlC... no [ 417s] checking for g++... g++ [ 417s] checking whether we are using the GNU C++ compiler... yes [ 417s] checking whether g++ accepts -g... yes [ 417s] checking dependency style of g++... gcc3 [ 417s] checking whether we are using the GNU C++ compiler... (cached) yes [ 417s] checking whether g++ accepts -g... (cached) yes [ 417s] checking dependency style of g++... (cached) gcc3 [ 417s] checking how to run the C++ preprocessor... g++ -E [ 417s] checking for ld used by g++... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 417s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 417s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 417s] checking for g++ option to produce PIC... -fPIC -DPIC [ 417s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 417s] checking if g++ static flag -static works... no [ 417s] checking if g++ supports -c -o file.o... yes [ 417s] checking if g++ supports -c -o file.o... (cached) yes [ 417s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 417s] checking dynamic linker characteristics... GNU/Linux ld.so [ 417s] checking how to hardcode library paths into programs... immediate [ 417s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 417s] checking whether we are using the GNU C compiler... (cached) yes [ 417s] checking whether gcc accepts -g... (cached) yes [ 417s] checking for gcc option to accept ISO C89... (cached) none needed [ 417s] checking dependency style of gcc... (cached) gcc3 [ 417s] checking for an ANSI C-conforming const... yes [ 418s] checking for size_t... yes [ 418s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 418s] checking for pkg-config... /usr/bin/pkg-config [ 418s] checking pkg-config is at least version 0.9.0... yes [ 418s] checking for ISF... yes [ 418s] checking for ANSI C header files... (cached) yes [ 418s] configure: creating ./config.status [ 418s] config.status: creating Makefile [ 418s] config.status: creating src/Makefile [ 418s] config.status: creating data/Makefile [ 418s] config.status: creating config.h [ 418s] config.status: executing depfiles commands [ 418s] config.status: executing libtool commands [ 418s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/libltdl) [ 418s] configure: WARNING: no configuration information is in libltdl [ 419s] + make -j6 [ 419s] make all-recursive [ 419s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] Making all in src [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c -o ise_engine_default_la-isf_default_imengine.lo `test -f 'isf_default_imengine.cpp' || echo './'`isf_default_imengine.cpp [ 419s] libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT ise_engine_default_la-isf_default_imengine.lo -MD -MP -MF .deps/ise_engine_default_la-isf_default_imengine.Tpo -c isf_default_imengine.cpp -fPIC -DPIC -o .libs/ise_engine_default_la-isf_default_imengine.o [ 419s] isf_default_imengine.cpp: In member function 'void DefaultFactory::reload_config(const ConfigPointer&)': [ 419s] isf_default_imengine.cpp:162:91: warning: 'hw_detected' may be used uninitialized in this function [-Wuninitialized] [ 419s] mv -f .deps/ise_engine_default_la-isf_default_imengine.Tpo .deps/ise_engine_default_la-isf_default_imengine.Plo [ 419s] /bin/sh ../libtool --tag=CXX --mode=link g++ -I/usr/include/scim-1.0 -DISF_ICONDIR=\"/usr/share/scim/icons\" -DISF_DEFAULT_LOCALEDIR=\"/usr/share/locale\" -DISF_DEFAULT_DATADIR=\"/usr/share/scim/ise-engine-default\" -DISF_DEFAULT_ICON_FILE=\"/usr/share/scim/icons/isf-default.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -o ise-engine-default.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine ise_engine_default_la-isf_default_imengine.lo -ldl [ 419s] libtool: link: /usr/bin/nm -B .libs/ise_engine_default_la-isf_default_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/ise-engine-default.exp [ 419s] libtool: link: /bin/grep -E -e "^[^_].*" ".libs/ise-engine-default.exp" > ".libs/ise-engine-default.expT" [ 419s] libtool: link: mv -f ".libs/ise-engine-default.expT" ".libs/ise-engine-default.exp" [ 419s] libtool: link: g++ -shared -nostdlib //usr/lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/crtbeginS.o .libs/ise_engine_default_la-isf_default_imengine.o -Wl,--as-needed -lscim-1.0 -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4 -L//lib -L//usr/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/crtendS.o //usr/lib/crtn.o -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,ise-engine-default.so -Wl,-retain-symbols-file -Wl,.libs/ise-engine-default.exp -o .libs/ise-engine-default.so [ 419s] libtool: link: ( cd ".libs" && rm -f "ise-engine-default.la" && ln -s "../ise-engine-default.la" "ise-engine-default.la" ) [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] Making all in data [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[2]: Nothing to be done for `all'. [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] make[2]: Nothing to be done for `all-am'. [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] + exit 0 [ 419s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0pXYBB [ 419s] + umask 022 [ 419s] + cd /home/abuild/rpmbuild/BUILD [ 419s] + cd ise-engine-default-0.1.5024 [ 419s] + LANG=C [ 419s] + export LANG [ 419s] + unset DISPLAY [ 419s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 419s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 419s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 419s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm install [ 419s] Making install in src [ 419s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] make[2]: Nothing to be done for `install-exec-am'. [ 419s] test -z "/usr/lib/scim-1.0/1.4.0/IMEngine" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine" [ 419s] /bin/sh ../libtool --mode=install /usr/bin/install -c ise-engine-default.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 419s] libtool: install: /usr/bin/install -c .libs/ise-engine-default.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 419s] libtool: install: /usr/bin/install -c .libs/ise-engine-default.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.la [ 419s] libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/src' [ 419s] Making install in data [ 419s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[2]: Nothing to be done for `install-exec-am'. [ 419s] test -z "/usr/share/scim/icons" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/share/scim/icons" [ 419s] /usr/bin/install -c -m 644 isf-default.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/share/scim/icons' [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/data' [ 419s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] make[2]: Nothing to be done for `install-exec-am'. [ 419s] make[2]: Nothing to be done for `install-data-am'. [ 419s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024' [ 419s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/share/info/dir [ 419s] + xargs rm -f -- [ 419s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm -regex '.*\.la$' [ 419s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm -regex '.*\.a$' [ 419s] + xargs rm -f -- [ 419s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/share/license [ 419s] + install -m0644 /home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024/LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/share/license/ise-engine-default [ 419s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ise-engine-default-0.1.5024 [ 420s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/ise-engine-default.so [ 420s] 35 blocks [ 420s] + /usr/lib/rpm/check-buildroot [ 420s] + /usr/lib/rpm//brp-compress [ 420s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 420s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 420s] + /usr/lib/rpm/brp-python-hardlink [ 420s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 420s] Processing files: ise-engine-default-0.1.5024-3.1.armv7l [ 420s] Provides: ise-engine-default.so [ 420s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 420s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) [ 420s] Processing files: ise-engine-default-debuginfo-0.1.5024-3.1.armv7l [ 420s] Processing files: ise-engine-default-debugsource-0.1.5024-3.1.armv7l [ 420s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 420s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-default-0.1.5024-3.1.src.rpm [ 420s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-0.1.5024-3.1.armv7l.rpm [ 420s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debuginfo-0.1.5024-3.1.armv7l.rpm [ 420s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debugsource-0.1.5024-3.1.armv7l.rpm [ 420s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gEfN6V [ 420s] + umask 022 [ 420s] + cd /home/abuild/rpmbuild/BUILD [ 420s] + cd ise-engine-default-0.1.5024 [ 420s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-default-0.1.5024-3.1.arm [ 420s] + exit 0 [ 420s] ... checking for files with abuild user/group [ 420s] ... creating baselibs [ 421s] ... saving built statistics [ 421s] /.build/build: line 3144: mount: command not found [ 421s] ERROR: no root disk device found, yet another new device name? [ 421s] ls: cannot access /sys/block/: No such file or directory [ 421s] /.build/build: line 3159: umount: command not found [ 421s] ... saving built packages [ 421s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-0.1.5024-3.1.armv7l.rpm [ 421s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debuginfo-0.1.5024-3.1.armv7l.rpm [ 421s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-default-debugsource-0.1.5024-3.1.armv7l.rpm [ 421s] /home/abuild/rpmbuild/SRPMS/ise-engine-default-0.1.5024-3.1.src.rpm [ 421s] /home/abuild/rpmbuild/OTHER/_statistics [ 421s] [ 421s] w17 finished "build ise-engine-default.spec" at Wed Feb 4 14:26:29 UTC 2015. [ 421s] [ 422s] /.build/build: line 368: 259 Killed background_monitor_process [ 424s] [ 412.826785] SysRq : Power Off [ 424s] [ 412.838687] Power down. [ 424s] build: extracting built packages... [ 424s] ise-engine-default-0.1.5024-3.1.armv7l.rpm [ 424s] ise-engine-default-debuginfo-0.1.5024-3.1.armv7l.rpm [ 424s] ise-engine-default-debugsource-0.1.5024-3.1.armv7l.rpm [ 424s] ise-engine-default-0.1.5024-3.1.src.rpm [ 424s] _statistics Retried build at Thu Feb 5 23:13:08 2015 returned same result, skipped