[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:ise-engine-hangul.spec" at Wed Feb 4 14:19:30 UTC 2015. [ 0s] [ 0s] Building ise-engine-hangul for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'cc41e1ccd66dbaa147fa8f5e59ff3d53' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:ise-engine-hangul.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 4s] cycle: libresourced -> system-resource [ 4s] breaking dependency libresourced -> system-resource [ 4s] cycle: libsensord -> sensord [ 4s] breaking dependency libsensord -> sensord [ 4s] cycle: pkgmgr-client -> pkgmgr-installer -> pkgmgr [ 4s] breaking dependency pkgmgr -> pkgmgr-client [ 4s] cycle: pkgmgr-installer -> pkgmgr [ 4s] breaking dependency pkgmgr -> pkgmgr-installer [ 4s] cycle: syspopup -> syspopup-caller [ 4s] breaking dependency syspopup -> syspopup-caller [ 4s] cycle: pulseaudio-libs -> pulseaudio [ 4s] breaking dependency pulseaudio -> pulseaudio-libs [ 4s] cycle: libalarm -> alarm-server [ 4s] breaking dependency alarm-server -> libalarm [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] cycle: system-resource -> system-resource-resourced [ 4s] breaking dependency system-resource-resourced -> system-resource [ 4s] done [ 12s] booting kvm ... [ 12s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 14s] [ 0.000000] tsc: Fast TSC calibration failed [ 15s] doing fast boot [ 15s] Creating device nodes with udev [ 20s] Waiting for device /dev/vda to appear: ok [ 20s] fsck from util-linux 2.21.2 [ 20s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 20s] /dev/vda: clean, 4976/2392064 files, 247924/9568256 blocks [ 20s] fsck succeeded. Mounting root device read-write. [ 20s] Mounting root /dev/vda [ 20s] mount -o rw -t ext4 /dev/vda /root [ 21s] replacing /etc/mtab with symlink to /proc/self/mounts [ 21s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 21s] 2nd stage started in virtual machine [ 21s] machine type: armv7l [ 21s] switching personality to 8... [ 22s] 2nd stage started in virtual machine [ 22s] machine type: armv7l [ 22s] /.build/build: line 770: mount: command not found [ 22s] swapon on /dev/vdb [ 22s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 22s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 22s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 22s] logging output to //.build.log... [ 22s] processing specfile /.build-srcdir/_service:gbs:ise-engine-hangul.spec ... [ 22s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:ise-engine-hangul.spec build rpmlint-Factory ... [ 22s] running rpm-x86-arm postinstall script [ 23s] running rpm-libs-x86-arm postinstall script [ 23s] running tizen-accelerator postinstall script [ 23s] running bash-x86-arm postinstall script [ 23s] initializing rpm db... [ 30s] [1/288] installing cross-armv7l-platformfile-0.0.1-3.1 [ 31s] [2/288] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 32s] [3/288] installing libX11-common-1.5.0-3.1 [ 32s] [4/288] installing tizen-release-2.2.0-3.1 [ 34s] [5/288] installing tzdata-2013h-3.1 [ 36s] [6/288] installing libgcc-4.6.4-3.14 [ 37s] [7/288] installing setup-0.1-3.1 [ 40s] [8/288] installing filesystem-0.1-3.1 [ 44s] warning: group lock does not exist - using root [ 44s] [9/288] installing eglibc-2.13-3.9 [ 46s] [10/288] installing libstdc++-4.6.4-3.14 [ 46s] [11/288] installing eglibc-common-2.13-3.9 [ 48s] [12/288] installing iniparser-2.17-3.1 [ 48s] [13/288] installing libstdc++-devel-4.6.4-3.14 [ 49s] [14/288] installing opengl-es-virtual-drv-0.1.6-3.2 [ 49s] [15/288] installing bash-4.1-3.1 [ 49s] [16/288] installing bzip2-libs-1.0.5-3.2 [ 50s] [17/288] installing c-ares-1.10.0_4-3.1 [ 50s] [18/288] installing capi-base-common-0.1.7-3.1 [ 50s] [19/288] installing cpio-2.8-3.1 [ 50s] [20/288] installing diffutils-3.0-3.1 [ 61s] [21/288] installing e2fsprogs-libs-1.41.9-3.1 [ 62s] [22/288] installing elfutils-libelf-0.152-3.8 [ 63s] [23/288] installing embryo-1.6.0+svn.76491slp2+build07-5.1 [ 64s] [24/288] installing expat-2.0.1-3.2 [ 64s] [25/288] installing fdupes-1.40-3.1 [ 64s] [26/288] installing findutils-4.2.31-3.1 [ 65s] [27/288] installing fribidi-0.19.6-3.1 [ 65s] [28/288] installing gdbm-1.8.3-3.3 [ 65s] [29/288] installing libXau-1.0.7-3.1 [ 65s] [30/288] installing libasound-1.0.25-1.0.25-2.1 [ 65s] [31/288] installing libattr-2.4.44-3.4 [ 65s] [32/288] installing libdrm2-2.4.35-3.1 [ 65s] [33/288] installing libffi-3.0.9-3.1 [ 66s] [34/288] installing libflac-1.2.1+slp2+build04-3.1 [ 66s] [35/288] installing libgomp-4.6.4-3.14 [ 66s] [36/288] installing libidn-1.15-3.1 [ 66s] [37/288] installing libjpeg-turbo-1.2.0-3.1 [ 66s] [38/288] installing libjson-0.10.1-2.1 [ 67s] [39/288] installing liblua-5.1.4-3.2 [ 67s] [40/288] installing libogg-1.2.1-3.1 [ 67s] [41/288] installing libtool-ltdl-2.2.6b-3.2 [ 67s] [42/288] installing libunwind-1.1-3.2 [ 67s] [43/288] installing libuuid-2.20.2-3.1 [ 67s] [44/288] installing lzo-2.03-3.3 [ 67s] [45/288] installing m4-1.4.14-3.1 [ 67s] [46/288] installing net-tools-1.60-3.1 [ 68s] [47/288] installing nspr-4.9-3.6 [ 68s] [48/288] installing nss-softokn-freebl-3.12.9-3.11 [ 68s] [49/288] installing openssl-1.0.1k-3.2 [ 68s] [50/288] installing patch-2.6-3.1 [ 68s] [51/288] installing pixman-0.28.2-3.1 [ 68s] [52/288] installing pkg-config-0.25-2.2 [ 68s] [53/288] installing popt-1.16-3.2 [ 69s] [54/288] installing readline-5.2-3.2 [ 69s] [55/288] installing sed-4.1.5-3.1 [ 69s] [56/288] installing smack-1.0+s14-3.2 [ 69s] [57/288] installing speex-1.2rc1-3.1 [ 69s] [58/288] installing sqlite-3.7.13-3.2 [ 69s] [59/288] installing systemd-libs-210-7.1 [ 69s] [60/288] installing tar-1.17-3.2 [ 70s] [61/288] installing xz-libs-5.0.3-3.3 [ 70s] [62/288] installing zlib-1.2.5-3.8 [ 70s] [63/288] installing gmp-4.2.1-3.2 [ 70s] [64/288] installing libpcre-7.7-3.3 [ 71s] [65/288] installing ncurses-libs-5.7-3.2 [ 71s] [66/288] installing build-compare-2009.10.14-3.5 [ 71s] [67/288] installing qemu.x86_64-1.2-5.1 [ 78s] [68/288] installing eglibc-headers-2.13-3.9 [ 78s] [69/288] installing libcap-2.21-3.2 [ 80s] [70/288] installing unzip-6.0-3.4 [ 80s] [71/288] installing zlib-devel-1.2.5-3.8 [ 80s] [72/288] installing freetype-2.4.9-3.1 [ 81s] [73/288] installing grep-2.5.1a-3.1 [ 83s] [74/288] installing libacl-2.2.49-3.2 [ 83s] [75/288] installing libfile-5.04-3.2 [ 85s] [76/288] installing libhangul-0.1.0-3.1 [ 86s] [77/288] installing libiri-1.7-3.1 [ 87s] [78/288] installing libpng-1.2.50-3.1 [ 87s] [79/288] installing libvorbis-1.2.3-3.1 [ 87s] [80/288] installing libxcb-1.8.1-3.1 [ 88s] [81/288] installing libxml2-2.7.8-3.2 [ 88s] [82/288] installing lzo-minilzo-2.03-3.3 [ 88s] [83/288] installing make-3.82-3.2 [ 89s] [84/288] installing minizip-1.2.5-3.8 [ 89s] [85/288] installing mpfr-3.0.0-3.2 [ 89s] [86/288] installing ncurses-5.7-3.2 [ 89s] [87/288] installing psmisc-22.20-3.2 [ 90s] [88/288] installing bzip2-1.0.5-3.2 [ 90s] [89/288] installing gettext-runtime-0.18.1.1-3.2 [ 90s] [90/288] installing glib2-2.32.3-3.1 [ 91s] [91/288] installing kmod-libs-15-3.1 [ 92s] [92/288] installing libblkid-2.20.2-3.1 [ 92s] [93/288] installing libicu-51-3.1 [ 94s] [94/288] installing smack-utils-1.0+s14-3.2 [ 95s] [95/288] installing xz-5.0.3-3.3 [ 96s] [96/288] installing binutils-2.22-3.4 [ 97s] [97/288] installing elfutils-libs-0.152-3.8 [ 97s] [98/288] installing libcurl-7.28.1_26-3.1 [ 98s] [99/288] installing nss-3.12.9-3.11 [ 99s] [100/288] installing perl-5.12.1-3.3 [ 110s] [101/288] installing ncurses-base-5.7-3.2 [ 110s] [102/288] installing perl-HTML-Tagset-3.20-3.1 [ 110s] [103/288] installing perl-IO-Compress-Base-2.008-3.3 [ 111s] [104/288] installing perl-Module-Pluggable-3.60-3.3 [ 111s] [105/288] installing perl-Pod-Escapes-1.04-3.3 [ 111s] [106/288] installing perl-TimeDate-1.20-3.1 [ 111s] [107/288] installing eglibc-devel-2.13-3.9 [ 111s] [108/288] installing libhangul-devel-0.1.0-3.1 [ 112s] [109/288] installing smack-privilege-config-1.0.8-3.1 [ 112s] /var/tmp/rpm-tmp.kSHi3M: line 2: which: command not found [ 112s] api_feature_loader not present [ 112s] [110/288] installing svi-data-0.1.3-3.1 [ 112s] [111/288] installing file-5.04-3.2 [ 112s] [112/288] installing lzo-devel-2.03-3.3 [ 112s] [113/288] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 113s] [114/288] installing perl-devel-5.12.1-3.3 [ 113s] [115/288] installing perl-libs-5.12.1-3.3 [ 114s] [116/288] installing coreutils-6.9-3.3 [ 114s] [117/288] installing gettext-tools-0.18.1.1-3.2 [ 115s] [118/288] installing libX11-1.5.0-3.1 [ 115s] [119/288] installing libdlog-0.4.1-3.1 [ 115s] [120/288] installing libmount-2.20.2-3.1 [ 115s] [121/288] installing mpc-0.9-3.2 [ 117s] [122/288] installing xz-lzma-compat-5.0.3-3.3 [ 117s] [123/288] installing elfutils-0.152-3.8 [ 117s] [124/288] installing harfbuzz-0.9.7-3.1 [ 117s] [125/288] installing nss-sysinit-3.12.9-3.11 [ 118s] [126/288] installing shared-mime-info-0.60-3.1 [ 128s] [127/288] installing libsndfile-1.0.28-3.1 [ 128s] [128/288] installing rpm-libs-4.9.1-4.1 [ 129s] [129/288] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 129s] [130/288] installing perl-Pod-Simple-3.07-3.3 [ 129s] [131/288] installing perl-Test-Simple-0.80-3.3 [ 129s] [132/288] installing tizen-accelerator-1.0.1-3.1 [ 129s] [133/288] installing eina-1.7.1+svn.77445+build35-3.1 [ 129s] [134/288] installing giflib-4.1.6-3.1 [ 130s] [135/288] installing libXcomposite-0.4.4-3.1 [ 130s] [136/288] installing libXdamage-1.1.3-3.1 [ 130s] [137/288] installing libXext-1.3.1-3.1 [ 130s] [138/288] installing libXfixes-5.0-3.1 [ 130s] [139/288] installing libXrender-0.9.7-3.1 [ 130s] [140/288] installing libremix-0.2.4+build14-3.1 [ 131s] [141/288] installing libtremolo-0.0.11-3.1 [ 131s] [142/288] installing perl-IO-Compress-Zlib-2.008-3.3 [ 131s] [143/288] installing perl-Test-Harness-3.12-3.3 [ 131s] [144/288] installing gawk-3.1.5-3.2 [ 132s] [145/288] installing gzip-1.3.12-3.1 [ 132s] [146/288] installing libcryptsvc-0.0.1-3.1 [ 132s] [147/288] installing xdgmime-0.0.12-3.1 [ 132s] [148/288] installing build-2011.01.10a-3.1 [ 132s] [149/288] installing bundle-0.1.35-3.1 [ 132s] [150/288] installing libcom-core-0.7.0-3.1 [ 132s] [151/288] installing rpm-4.9.1-4.1 [ 133s] [152/288] installing cpp-4.6.4-3.14 [ 133s] [153/288] installing libslp-db-util-0.1.8-3.1 [ 134s] [154/288] installing sys-assert-0.3.2-3.1 [ 134s] [155/288] installing dbus-1.6.4-3.1 [ 134s] [156/288] installing util-linux-2.20.2-3.1 [ 135s] [157/288] installing fontconfig-2.9.0-3.1 [ 137s] /opt/var/cache/fontconfig/*: No such file or directory [ 138s] [158/288] installing glib2-devel-2.32.3-3.1 [ 138s] [159/288] installing libprivilege-control-0.0.89-3.1 [ 155s] Applying sql update files on db [ 155s] /opt/dbspace/.rules-db.db3 [ 155s] Creating database from scratch [ 155s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 155s] Done. [ 155s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 155s] Done. [ 156s] [160/288] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 156s] [161/288] installing dbus-libs-1.6.4-3.1 [ 157s] [162/288] installing eglibc-x86-arm-2.13-2.3 [ 162s] [163/288] installing elfutils-libelf-x86-arm-0.152-2.1 [ 163s] [164/288] installing elfutils-libs-x86-arm-0.152-2.3 [ 164s] [165/288] installing gmp-x86-arm-4.2.1-2.1 [ 164s] [166/288] installing libacl-x86-arm-2.2.49-2.1 [ 164s] [167/288] installing libattr-x86-arm-2.4.44-2.1 [ 165s] [168/288] installing libcap-x86-arm-2.21-2.1 [ 165s] [169/288] installing libfile-x86-arm-5.04-2.2 [ 166s] [170/288] installing libgcc-x86-arm-4.6.4-2.1 [ 167s] [171/288] installing liblua-x86-arm-5.1.4-2.1 [ 167s] [172/288] installing mpc-x86-arm-0.9-2.1 [ 193s] [173/288] installing mpfr-x86-arm-3.0.0-2.1 [ 202s] [174/288] installing ncurses-libs-x86-arm-5.7-2.2 [ 202s] [175/288] installing nspr-x86-arm-4.9-2.3 [ 204s] [176/288] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 204s] [177/288] installing nss-x86-arm-3.12.9-2.3 [ 206s] [178/288] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 207s] [179/288] installing popt-x86-arm-1.16-2.1 [ 207s] [180/288] installing rpm-libs-x86-arm-4.9.1-2.2 [ 207s] [181/288] installing sqlite-x86-arm-3.7.13-2.1 [ 208s] [182/288] installing xz-libs-x86-arm-5.0.3-2.1 [ 208s] [183/288] installing zlib-x86-arm-1.2.5-2.1 [ 208s] [184/288] installing ecore-1.7.1+svn.77580+build125-5.1 [ 208s] [185/288] installing libXgesture-0.1.1-3.1 [ 208s] [186/288] installing libXi-1.6.1-3.1 [ 209s] [187/288] installing libXinerama-1.1.2-3.1 [ 209s] [188/288] installing libXtst-1.2.0-3.1 [ 210s] [189/288] installing libXv-1.0.7-3.1 [ 210s] [190/288] installing libdri2-0.1.0-3.1 [ 210s] [191/288] installing eet-1.7.1+svn.77495+build14-5.1 [ 210s] [192/288] installing libXcursor-1.1.13-3.1 [ 211s] [193/288] installing libXrandr-1.4.0-3.1 [ 212s] [194/288] installing librua-0.1.8-3.1 [ 213s] [195/288] installing capi-system-info-0.2.0-3.1 [ 216s] [196/288] installing systemd-210-7.1 [ 225s] [197/288] installing gcc-4.6.4-3.14 [ 227s] [198/288] installing cairo-1.12.14-3.1 [ 229s] [199/288] installing rpm-build-4.9.1-4.1 [ 230s] [200/288] installing libjournal-0.1.0-2.1 [ 230s] [201/288] installing perl-CPAN-1.9205-3.3 [ 231s] [202/288] installing bash-x86-arm-4.1-2.1 [ 232s] [203/288] installing dbus-glib-0.100-3.1 [ 233s] [204/288] installing ecore-imf-1.7.1+svn.77580+build125-5.1 [ 233s] [205/288] installing ecore-input-1.7.1+svn.77580+build125-5.1 [ 233s] [206/288] installing fdupes-x86-arm-1.40-2.1 [ 233s] [207/288] installing findutils-x86-arm-4.2.31-2.1 [ 233s] [208/288] installing gawk-x86-arm-3.1.5-2.2 [ 233s] [209/288] installing gzip-x86-arm-1.3.12-2.1 [ 233s] [210/288] installing make-x86-arm-3.82-2.1 [ 237s] [211/288] installing sed-x86-arm-4.1.5-2.1 [ 237s] [212/288] installing tar-x86-arm-1.17-2.2 [ 238s] [213/288] installing diffutils-x86-arm-3.0-2.1 [ 238s] [214/288] installing patch-x86-arm-2.6-2.1 [ 239s] [215/288] installing autoconf-2.68-3.1 [ 239s] [216/288] installing coreutils-x86-arm-6.9-2.1 [ 242s] [217/288] installing ecore-con-1.7.1+svn.77580+build125-5.1 [ 242s] [218/288] installing file-x86-arm-5.04-2.1 [ 242s] [219/288] installing libslp-utilx-0.4.5-3.1 [ 244s] [220/288] installing libtbm-1.1.1-3.1 [ 244s] [221/288] installing vconf-0.2.83-3.1 [ 244s] Failed to get D-Bus connection: Unknown error 4294967295 [ 244s] warning: %post(vconf-0.2.83-3.1.armv7l) scriptlet failed, exit status 1 [ 244s] [222/288] installing bluez-5.16_8-3.1 [ 247s] [223/288] installing elfutils-x86-arm-0.152-2.3 [ 248s] [224/288] installing gcc-c++-4.6.4-3.14 [ 249s] [225/288] installing security-server-0.0.125-3.1 [ 251s] Failed to get D-Bus connection: Unknown error 4294967295 [ 251s] Failed to get D-Bus connection: Unknown error 4294967295 [ 251s] [226/288] installing evas-1.7.1+svn.77561+build187-5.1 [ 252s] [227/288] installing rpm-x86-arm-4.9.1-2.2 [ 253s] /bin/rpm.orig-arm already present - skipping. [ 253s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 253s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 253s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 253s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 253s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 253s] [228/288] installing rpm-build-x86-arm-4.9.1-2.2 [ 253s] [229/288] installing automake-1.11.1-3.1 [ 253s] [230/288] installing ecore-fb-1.7.1+svn.77580+build125-5.1 [ 253s] [231/288] installing ecore-file-1.7.1+svn.77580+build125-5.1 [ 253s] [232/288] installing ecore-imf-evas-1.7.1+svn.77580+build125-5.1 [ 253s] [233/288] installing ecore-ipc-1.7.1+svn.77580+build125-5.1 [ 253s] [234/288] installing libsecurity-server-client-0.0.125-3.1 [ 254s] [235/288] installing audio-session-manager-0.4.6-3.1 [ 254s] [236/288] installing ecore-input-evas-1.7.1+svn.77580+build125-5.1 [ 254s] [237/288] installing edbus-1.6.0+svn.76526slp2+build10-3.1 [ 254s] [238/288] installing libsensord-1.1.17-3.1 [ 254s] [239/288] installing ail-0.2.95-3.1 [ 254s] [240/288] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 258s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 258s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 259s] [241/288] installing pkgmgr-info-0.0.230-3.1 [ 259s] [242/288] installing ecore-x-1.7.1+svn.77580+build125-5.1 [ 259s] [243/288] installing libtool-2.2.6b-3.2 [ 259s] [244/288] installing capi-security-privilege-manager-0.0.3-3.1 [ 259s] [245/288] installing libmm-session-0.4.16-3.1 [ 259s] [246/288] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 260s] [247/288] installing efreet-1.7.1+svn.77412+build14-3.1 [ 261s] [248/288] installing sensord-1.1.17-3.1 [ 261s] [249/288] installing libresourced-0.2.86-3.1 [ 261s] [250/288] installing pkgmgr-info-parser-0.0.230-3.1 [ 261s] [251/288] installing ecore-evas-1.7.1+svn.77580+build125-5.1 [ 262s] [252/288] installing privacy-manager-server-0.0.6-3.1 [ 262s] Check privacy DB [ 262s] Create privacy DB [ 262s] persist [ 262s] [253/288] installing pulseaudio-4.0.145-7.1 [ 263s] Failed to get D-Bus connection: Unknown error 4294967295 [ 263s] Failed to get D-Bus connection: Unknown error 4294967295 [ 263s] warning: %post(pulseaudio-4.0.145-7.1.armv7l) scriptlet failed, exit status 1 [ 263s] [254/288] installing pulseaudio-libs-4.0.145-7.1 [ 263s] [255/288] installing edje-1.7.1+svn.77330+build179-3.1 [ 263s] [256/288] installing system-resource-resourced-0.2.86-3.1 [ 263s] [257/288] installing aul-0.2.3.0-3.1 [ 264s] [258/288] installing system-resource-0.2.86-3.1 [ 264s] [259/288] installing app-core-common-1.3.40-3.1 [ 264s] [260/288] installing ethumb-1.6.0+svn.75994slp2+build09-3.1 [ 264s] [261/288] installing app-svc-0.1.78-3.1 [ 264s] persist [ 264s] [262/288] installing alarm-server-0.4.163-3.1 [ 265s] [263/288] installing elementary-1.7.1+svn.77535+build567-3.1 [ 265s] [264/288] installing libalarm-0.4.163-3.1 [ 265s] [265/288] installing app-core-efl-1.3.40-3.1 [ 265s] [266/288] installing syspopup-0.0.134-3.1 [ 265s] [267/288] installing capi-media-tool-0.1.1-2.1 [ 265s] [268/288] installing bluetooth-frwk-0.2.146-3.1 [ 266s] [269/288] installing capi-appfw-application-0.3.1.0-3.1 [ 266s] [270/288] installing syspopup-caller-0.0.134-3.1 [ 266s] [271/288] installing pkgmgr-0.3.37-3.1 [ 270s] [PKG_INITDB][D] ========================================================================= [ 270s] [PKG_INITDB][D] install manifest=[/usr/share/packages/com.samsung.pkgmgr-install.xml] [ 270s] [PKG_INITDB][D] corexml is installed, time=[5]ms [ 270s] [PKG_INITDB][D] try to apply smack [ 270s] [PKG_INITDB][D] smack is applied, time=[2]ms [ 270s] [PKG_INITDB][D] try to apply privileges [ 270s] [PKG_INITDB][D] privileges are applied, time=[2]ms [ 270s] [PKG_INITDB][D] ------------------------------------------------------ [ 270s] [PKG_INITDB][D] done [ 270s] [PKG_INITDB][D] ------------------------------------------------------ [ 270s] [PKG_INITDB][D] manifest xml=[/usr/share/packages/com.samsung.pkgmgr-install.xml] [ 270s] [PKG_INITDB][D] package id=[com.samsung.pkgmgr-install] [ 270s] [PKG_INITDB][D] time=[9]ms [ 270s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 270s] [PKG_INITDB][D] package manager db init for manifest xml, directory=[/usr/share/packages] [ 270s] [PKG_INITDB][D] package total count : 1 [ 270s] [PKG_INITDB][D] Time for db init : 0 sec [ 270s] [PKG_INITDB][D] time for smack : 0 sec [ 270s] [PKG_INITDB][D] time for privilege : 0 sec [ 270s] [PKG_INITDB][D] time for total process : 0 sec [ 270s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 270s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 270s] [PKG_INITDB][D] package manager db init for manifest xml, directory=[/opt/share/packages] [ 270s] [PKG_INITDB][D] package total count : 0 [ 270s] [PKG_INITDB][D] Time for db init : 0 sec [ 270s] [PKG_INITDB][D] time for smack : 0 sec [ 270s] [PKG_INITDB][D] time for privilege : 0 sec [ 270s] [PKG_INITDB][D] time for total process : 0 sec [ 270s] [PKG_INITDB][D] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ [ 270s] [PKG_INITDB][D] apply smack pkgid : ui-gadget::client [ 270s] [PKG_INITDB][D] apply smack pkgid : e17 [ 270s] [PKG_INITDB][E] FAIL : chown /opt/dbspace/.pkgmgr_parser.db 0.0, because ðÇ0ö [ 270s] [PKG_INITDB][E] cannot chown. [ 270s] /opt/dbspace/.pkgmgr_cert.db-journal: No such file or directory [ 270s] [PKG_INITDB][D] ================================================================ [ 270s] [PKG_INITDB][D] Package-Manager initializing start : Wed Feb 4 09:23:56 2015 [ 270s] [PKG_INITDB][D] Package-Manager initializing end : Wed Feb 4 09:23:56 2015 [ 270s] [PKG_INITDB][D] ================================================================ [ 270s] [PKG_INITDB][D] ================== Installed package list ===================== [ 270s] [PKG_INITDB][E] cannot get_list. [ 270s] [PKG_INITDB][D] ================================================================ [ 270s] [PKG_INITDB][E] Insert for app-aliasID DB failed [ 270s] /usr/etc/package-manager/pkg_path.conf: No such file or directory [ 270s] The list of removed files has saved at /usr/share/removed-file.lst [ 271s] [272/288] installing libmm-utility-0.31-3.1 [ 271s] [273/288] installing pkgmgr-installer-0.3.37-3.1 [ 271s] [274/288] installing notification-0.2.23-3.1 [ 271s] persist [ 272s] [275/288] installing capi-media-image-util-0.1.2-3.1 [ 272s] [276/288] installing pkgmgr-client-0.3.37-3.1 [ 272s] [277/288] installing capi-appfw-app-manager-0.2.4-3.1 [ 272s] [278/288] installing capi-appfw-package-manager-0.0.49-3.1 [ 272s] [279/288] installing privacy-manager-client-0.0.6-3.1 [ 273s] [280/288] installing capi-network-bluetooth-0.1.52-3.1 [ 273s] [281/288] installing libmm-sound-0.9.182-3.1 [ 274s] [282/288] installing capi-media-audio-io-0.2.27-3.1 [ 275s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 275s] Done. [ 275s] [283/288] installing capi-media-sound-manager-0.2.26-3.1 [ 275s] Loading rules from directory '/usr/share/privilege-control' for tizen version (null). [ 275s] Done. [ 275s] [284/288] installing libfeedback-0.1.3-3.1 [ 276s] [285/288] installing tts-0.2.41-3.1 [ 276s] [286/288] installing efl-assist-0.1.143-3.1 [ 276s] [287/288] installing isf-2.4.8317-3.1 [ 277s] [288/288] installing isf-devel-2.4.8317-3.1 [ 277s] removing nis flags from //etc/nsswitch.conf... [ 277s] now finalizing build dir... [ 277s] /.build/build: line 2585: mount: command not found [ 277s] /.build/build: line 2586: mount: command not found [ 283s] build target is armv7l-tizen-linux [ 283s] ----------------------------------------------------------------- [ 283s] I have the following modifications for ise-engine-hangul.spec: [ 283s] 5c5 [ 283s] < Release: 4 [ 283s] --- [ 283s] > Release: 3.1 [ 283s] 43a44 [ 283s] > %changelog [ 283s] ----------------------------------------------------------------- [ 283s] ----- building ise-engine-hangul.spec (user abuild) [ 283s] ----------------------------------------------------------------- [ 283s] ----------------------------------------------------------------- [ 283s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/cc41e1ccd66dbaa147fa8f5e59ff3d53-ise-engine-hangul' /home/abuild/rpmbuild/SOURCES/ise-engine-hangul.spec [ 283s] Building target platforms: armv7l-tizen-linux [ 283s] Building for target armv7l-tizen-linux [ 283s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XqZwlJ [ 283s] + umask 022 [ 283s] + cd /home/abuild/rpmbuild/BUILD [ 283s] + LANG=C [ 283s] + export LANG [ 283s] + unset DISPLAY [ 283s] + cd /home/abuild/rpmbuild/BUILD [ 283s] + rm -rf ise-engine-hangul-0.4.0 [ 283s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ise-engine-hangul-0.4.0.tar.gz [ 283s] + /bin/tar -xf - [ 283s] + STATUS=0 [ 283s] + '[' 0 -ne 0 ']' [ 283s] + cd ise-engine-hangul-0.4.0 [ 283s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 283s] + exit 0 [ 283s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.DxzEFd [ 283s] + umask 022 [ 283s] + cd /home/abuild/rpmbuild/BUILD [ 283s] + cd ise-engine-hangul-0.4.0 [ 283s] + LANG=C [ 283s] + export LANG [ 283s] + unset DISPLAY [ 283s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 283s] + export CFLAGS [ 283s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 283s] + export CXXFLAGS [ 283s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 283s] + export FFLAGS [ 283s] + LD_AS_NEEDED=1 [ 283s] + export LD_AS_NEEDED [ 283s] + ./bootstrap [ 283s] + touch ChangeLog [ 283s] + autopoint --force [ 283s] Copying file ABOUT-NLS [ 283s] Copying file config.rpath [ 283s] Creating directory m4 [ 283s] Copying file m4/codeset.m4 [ 283s] Copying file m4/fcntl-o.m4 [ 283s] Copying file m4/gettext.m4 [ 283s] Copying file m4/glibc2.m4 [ 283s] Copying file m4/glibc21.m4 [ 283s] Copying file m4/iconv.m4 [ 283s] Copying file m4/intdiv0.m4 [ 283s] Copying file m4/intl.m4 [ 283s] Copying file m4/intldir.m4 [ 283s] Copying file m4/intlmacosx.m4 [ 283s] Copying file m4/intmax.m4 [ 283s] Copying file m4/inttypes-pri.m4 [ 283s] Copying file m4/inttypes_h.m4 [ 283s] Copying file m4/lcmessage.m4 [ 283s] Copying file m4/lib-ld.m4 [ 283s] Copying file m4/lib-link.m4 [ 284s] Copying file m4/lib-prefix.m4 [ 284s] Copying file m4/lock.m4 [ 284s] Copying file m4/longlong.m4 [ 284s] Copying file m4/nls.m4 [ 284s] Copying file m4/po.m4 [ 284s] Copying file m4/printf-posix.m4 [ 284s] Copying file m4/progtest.m4 [ 284s] Copying file m4/size_max.m4 [ 284s] Copying file m4/stdint_h.m4 [ 284s] Copying file m4/threadlib.m4 [ 284s] Copying file m4/uintmax_t.m4 [ 284s] Copying file m4/visibility.m4 [ 284s] Copying file m4/wchar_t.m4 [ 284s] Copying file m4/wint_t.m4 [ 284s] Copying file m4/xsize.m4 [ 284s] Copying file po/Makefile.in.in [ 284s] Copying file po/Rules-quot [ 284s] + libtoolize --copy --automake [ 284s] libtoolize: `COPYING.LIB' not found in `/usr/share/libtool/libltdl' [ 284s] + aclocal -I ./m4 [ 310s] + autoheader [ 318s] + automake --add-missing --copy --include-deps [ 326s] + autoconf [ 334s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 334s] + export CFLAGS [ 334s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 334s] + export CXXFLAGS [ 334s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 334s] + export FFLAGS [ 334s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --disable-static [ 334s] checking for a BSD-compatible install... /usr/bin/install -c [ 335s] checking whether build environment is sane... yes [ 335s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 335s] checking for gawk... gawk [ 335s] checking whether make sets $(MAKE)... yes [ 335s] checking build system type... armv7l-unknown-linux-gnueabi [ 335s] checking host system type... armv7l-unknown-linux-gnueabi [ 335s] checking for style of include used by make... GNU [ 335s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 335s] checking for gcc... gcc [ 337s] checking whether the C compiler works... yes [ 337s] checking for C compiler default output file name... a.out [ 339s] checking for suffix of executables... [ 339s] checking whether we are cross compiling... no [ 340s] checking for suffix of object files... o [ 340s] checking whether we are using the GNU C compiler... yes [ 340s] checking whether gcc accepts -g... yes [ 340s] checking for gcc option to accept ISO C89... none needed [ 340s] checking dependency style of gcc... gcc3 [ 340s] checking for a sed that does not truncate output... /bin/sed [ 340s] checking for grep that handles long lines and -e... /bin/grep [ 341s] checking for egrep... /bin/grep -E [ 341s] checking for fgrep... /bin/grep -F [ 341s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 341s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 341s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 341s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 341s] checking whether ln -s works... yes [ 341s] checking the maximum length of command line arguments... 1572864 [ 341s] checking whether the shell understands some XSI constructs... yes [ 341s] checking whether the shell understands "+="... yes [ 341s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 341s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 341s] checking for objdump... objdump [ 341s] checking how to recognize dependent libraries... pass_all [ 341s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 341s] checking for ar... ar [ 341s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 341s] checking for strip... strip [ 341s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 341s] checking for ranlib... ranlib [ 341s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 341s] checking how to run the C preprocessor... gcc -E [ 341s] checking for ANSI C header files... yes [ 341s] checking for sys/types.h... yes [ 341s] checking for sys/stat.h... yes [ 341s] checking for stdlib.h... yes [ 341s] checking for string.h... yes [ 341s] checking for memory.h... yes [ 341s] checking for strings.h... yes [ 341s] checking for inttypes.h... yes [ 341s] checking for stdint.h... yes [ 341s] checking for unistd.h... yes [ 341s] checking for dlfcn.h... yes [ 341s] checking for objdir... .libs [ 341s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 341s] checking for gcc option to produce PIC... -fPIC -DPIC [ 341s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 341s] checking if gcc static flag -static works... no [ 341s] checking if gcc supports -c -o file.o... yes [ 341s] checking if gcc supports -c -o file.o... (cached) yes [ 342s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 342s] checking whether -lc should be explicitly linked in... no [ 342s] checking dynamic linker characteristics... GNU/Linux ld.so [ 342s] checking how to hardcode library paths into programs... immediate [ 342s] checking for shl_load... no [ 342s] checking for shl_load in -ldld... no [ 342s] checking for dlopen... no [ 342s] checking for dlopen in -ldl... yes [ 342s] checking whether a program can dlopen itself... yes [ 342s] checking whether a statically linked program can dlopen itself... yes [ 342s] checking whether stripping libraries is possible... yes [ 342s] checking if libtool supports shared libraries... yes [ 342s] checking whether to build shared libraries... yes [ 342s] checking whether to build static libraries... no [ 342s] checking which extension is used for runtime loadable modules... .so [ 342s] checking which variable specifies run-time module search path... LD_LIBRARY_PATH [ 342s] checking for the default library search path... /lib /usr/lib /emul/ia32-linux/usr/x86_64-tizen-linux/lib64 /emul/ia32-linux/usr/i586-tizen-linux/lib /emul/ia32-linux/usr/local/lib64 /emul/ia32-linux/usr/local/lib /emul/ia32-linux/lib64 /emul/ia32-linux/lib /emul/ia32-linux/usr/lib64 /emul/ia32-linux/usr/lib [ 342s] checking for library containing dlopen... -ldl [ 342s] checking for dlerror... yes [ 342s] checking for shl_load... (cached) no [ 342s] checking for shl_load in -ldld... (cached) no [ 342s] checking for dld_link in -ldld... no [ 342s] checking for _ prefix in compiled symbols... no [ 342s] checking whether deplibs are loaded by dlopen... yes [ 342s] checking for argz.h... yes [ 342s] checking for error_t... yes [ 342s] checking for argz_add... yes [ 342s] checking for argz_append... yes [ 342s] checking for argz_count... yes [ 342s] checking for argz_create_sep... yes [ 342s] checking for argz_insert... yes [ 342s] checking for argz_next... yes [ 342s] checking for argz_stringify... yes [ 342s] checking if argz actually works... yes [ 342s] checking whether libtool supports -dlopen/-dlpreopen... yes [ 342s] checking for ltdl.h... no [ 342s] checking where to find libltdl headers... -I${top_srcdir}/libltdl [ 342s] checking where to find libltdl library... ${top_build_prefix}libltdl/libltdlc.la [ 342s] checking for unistd.h... (cached) yes [ 343s] checking for dl.h... no [ 343s] checking for sys/dl.h... no [ 343s] checking for dld.h... no [ 343s] checking for mach-o/dyld.h... no [ 343s] checking for dirent.h... yes [ 343s] checking for closedir... yes [ 343s] checking for opendir... yes [ 343s] checking for readdir... yes [ 343s] checking for strlcat... no [ 343s] checking for strlcpy... no [ 343s] checking for armv7l-unknown-linux-gnueabi-g++... no [ 343s] checking for armv7l-unknown-linux-gnueabi-c++... no [ 343s] checking for armv7l-unknown-linux-gnueabi-gpp... no [ 343s] checking for armv7l-unknown-linux-gnueabi-aCC... no [ 343s] checking for armv7l-unknown-linux-gnueabi-CC... no [ 343s] checking for armv7l-unknown-linux-gnueabi-cxx... no [ 343s] checking for armv7l-unknown-linux-gnueabi-cc++... no [ 343s] checking for armv7l-unknown-linux-gnueabi-cl.exe... no [ 343s] checking for armv7l-unknown-linux-gnueabi-FCC... no [ 343s] checking for armv7l-unknown-linux-gnueabi-KCC... no [ 343s] checking for armv7l-unknown-linux-gnueabi-RCC... no [ 343s] checking for armv7l-unknown-linux-gnueabi-xlC_r... no [ 343s] checking for armv7l-unknown-linux-gnueabi-xlC... no [ 343s] checking for g++... g++ [ 343s] checking whether we are using the GNU C++ compiler... yes [ 343s] checking whether g++ accepts -g... yes [ 343s] checking dependency style of g++... gcc3 [ 343s] checking whether we are using the GNU C++ compiler... (cached) yes [ 343s] checking whether g++ accepts -g... (cached) yes [ 343s] checking dependency style of g++... (cached) gcc3 [ 343s] checking how to run the C++ preprocessor... g++ -E [ 343s] checking for ld used by g++... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 343s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 343s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 343s] checking for g++ option to produce PIC... -fPIC -DPIC [ 343s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 343s] checking if g++ static flag -static works... no [ 343s] checking if g++ supports -c -o file.o... yes [ 343s] checking if g++ supports -c -o file.o... (cached) yes [ 343s] checking whether the g++ linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 344s] checking dynamic linker characteristics... GNU/Linux ld.so [ 344s] checking how to hardcode library paths into programs... immediate [ 344s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 344s] checking whether we are using the GNU C compiler... (cached) yes [ 344s] checking whether gcc accepts -g... (cached) yes [ 344s] checking for gcc option to accept ISO C89... (cached) none needed [ 344s] checking dependency style of gcc... (cached) gcc3 [ 344s] checking for an ANSI C-conforming const... yes [ 344s] checking for size_t... yes [ 344s] checking whether NLS is requested... yes [ 344s] checking for msgfmt... /usr/bin/msgfmt [ 344s] checking for gmsgfmt... /usr/bin/msgfmt [ 344s] checking for xgettext... /usr/bin/xgettext [ 344s] checking for msgmerge... /usr/bin/msgmerge [ 344s] checking for ld used by GCC... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 344s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 344s] checking for shared library run path origin... done [ 344s] checking for CFPreferencesCopyAppValue... no [ 344s] checking for CFLocaleCopyCurrent... no [ 344s] checking for GNU gettext in libc... yes [ 344s] checking whether to use NLS... yes [ 344s] checking where the gettext function comes from... libc [ 344s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 344s] checking for pkg-config... /usr/bin/pkg-config [ 344s] checking pkg-config is at least version 0.9.0... yes [ 344s] checking for LIBHANGUL... yes [ 344s] checking for SCIM... yes [ 344s] checking for SCIM_GTKUTILS... no [ 344s] checking for ANSI C header files... (cached) yes [ 344s] configure: creating ./config.status [ 345s] config.status: creating Makefile [ 345s] config.status: creating po/Makefile.in [ 345s] config.status: creating src/Makefile [ 345s] config.status: creating data/Makefile [ 345s] config.status: creating scim-hangul.spec [ 345s] config.status: creating config.h [ 345s] config.status: executing depfiles commands [ 345s] config.status: executing libtool commands [ 345s] config.status: executing po-directories commands [ 345s] config.status: creating po/POTFILES [ 345s] config.status: setting ALL_LINGUAS in configure.in is obsolete [ 345s] config.status: creating po/Makefile [ 345s] === configuring in libltdl (/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/libltdl) [ 345s] configure: WARNING: no configuration information is in libltdl [ 345s] + make -j4 [ 345s] make all-recursive [ 345s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 345s] Making all in src [ 345s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 345s] /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c -o hangul_la-scim_hangul_imengine.lo `test -f 'scim_hangul_imengine.cpp' || echo './'`scim_hangul_imengine.cpp [ 345s] libtool: compile: g++ -DHAVE_CONFIG_H -I. -I.. -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT hangul_la-scim_hangul_imengine.lo -MD -MP -MF .deps/hangul_la-scim_hangul_imengine.Tpo -c scim_hangul_imengine.cpp -fPIC -DPIC -o .libs/hangul_la-scim_hangul_imengine.o [ 347s] mv -f .deps/hangul_la-scim_hangul_imengine.Tpo .deps/hangul_la-scim_hangul_imengine.Plo [ 348s] /bin/sh ../libtool --tag=CXX --mode=link g++ -I/usr/include/scim-1.0 -I/usr/include/hangul-1.0 -DSCIM_ICONDIR=\"/usr/share/scim/icons\" -DSCIM_HANGUL_LOCALEDIR=\"/usr/share/locale\" -DSCIM_HANGUL_DATADIR=\"/usr/share/scim/hangul\" -DSCIM_HANGUL_ICON_FILE=\"/usr/share/scim/icons/scim-hangul.png\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -avoid-version -rpath /usr/lib/scim-1.0/1.4.0/IMEngine -module -export-symbols-regex "^[^_].*" -lscim-1.0 -lhangul -o hangul.la -rpath /usr/lib/scim-1.0/1.4.0/IMEngine hangul_la-scim_hangul_imengine.lo -ldl [ 348s] libtool: link: /usr/bin/nm -B .libs/hangul_la-scim_hangul_imengine.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/hangul.exp [ 348s] libtool: link: /bin/grep -E -e "^[^_].*" ".libs/hangul.exp" > ".libs/hangul.expT" [ 348s] libtool: link: mv -f ".libs/hangul.expT" ".libs/hangul.exp" [ 348s] libtool: link: g++ -shared -nostdlib //usr/lib/crti.o /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/crtbeginS.o .libs/hangul_la-scim_hangul_imengine.o -Wl,--as-needed -lscim-1.0 -lhangul -ldl -L/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4 -L//lib -L//usr/lib -lstdc++ -lm -lc -lgcc_s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/crtendS.o //usr/lib/crtn.o -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,-soname -Wl,hangul.so -Wl,-retain-symbols-file -Wl,.libs/hangul.exp -o .libs/hangul.so [ 348s] libtool: link: ( cd ".libs" && rm -f "hangul.la" && ln -s "../hangul.la" "hangul.la" ) [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 348s] Making all in data [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] make[2]: Nothing to be done for `all'. [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] Making all in po [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] test ! -f ./scim-hangul.pot || \ [ 348s] test -z "de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo" || make de.gmo fr.gmo ja.gmo ko.gmo nl.gmo pa.gmo zh_CN.gmo [ 348s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] rm -f fr.gmo && /usr/bin/msgfmt -c --statistics --verbose -o fr.gmo fr.po [ 348s] rm -f de.gmo && /usr/bin/msgfmt -c --statistics --verbose -o de.gmo de.po [ 348s] rm -f ko.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ko.gmo ko.po [ 348s] rm -f ja.gmo && /usr/bin/msgfmt -c --statistics --verbose -o ja.gmo ja.po [ 348s] fr.po: ko.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 348s] 27 translated messages. [ 348s] rm -f pa.gmo && /usr/bin/msgfmt -c --statistics --verbose -o pa.gmo pa.po [ 348s] rm -f nl.gmo && /usr/bin/msgfmt -c --statistics --verbose -o nl.gmo nl.po [ 348s] de.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 348s] ja.po: 9 translated messages, 8 fuzzy translations, 10 untranslated messages. [ 348s] rm -f zh_CN.gmo && /usr/bin/msgfmt -c --statistics --verbose -o zh_CN.gmo zh_CN.po [ 348s] pa.po: 9 translated messages, 6 fuzzy translations, 12 untranslated messages. [ 348s] nl.po: zh_CN.po: 27 translated messages. [ 348s] 8 translated messages, 9 fuzzy translations, 10 untranslated messages. [ 348s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] touch stamp-po [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] + exit 0 [ 348s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.E86QZC [ 348s] + umask 022 [ 348s] + cd /home/abuild/rpmbuild/BUILD [ 348s] + cd ise-engine-hangul-0.4.0 [ 348s] + LANG=C [ 348s] + export LANG [ 348s] + unset DISPLAY [ 348s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 348s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 348s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 348s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm install [ 348s] Making install in src [ 348s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 348s] make[2]: Nothing to be done for `install-exec-am'. [ 348s] test -z "/usr/lib/scim-1.0/1.4.0/IMEngine" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine" [ 348s] /bin/sh ../libtool --mode=install /usr/bin/install -c hangul.la '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine' [ 348s] libtool: install: /usr/bin/install -c .libs/hangul.so /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 348s] libtool: install: /usr/bin/install -c .libs/hangul.lai /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.la [ 348s] libtool: install: warning: remember to run `libtool --finish /usr/lib/scim-1.0/1.4.0/IMEngine' [ 348s] test -z "/usr/lib/scim-1.0/1.4.0/SetupUI" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/SetupUI" [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 348s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/src' [ 348s] Making install in data [ 348s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] make[2]: Nothing to be done for `install-exec-am'. [ 348s] test -z "/usr/share/scim/icons" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/scim/icons" [ 348s] /usr/bin/install -c -m 644 scim-hangul.png scim-hangul-on.png scim-hangul-off.png '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/scim/icons' [ 348s] test -z "/usr/share/scim/hangul" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/scim/hangul" [ 348s] /usr/bin/install -c -m 644 symbol.txt '/home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/scim/hangul' [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/data' [ 348s] Making install in po [ 348s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/de/LC_MESSAGES/scim-hangul.mo [ 348s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/fr/LC_MESSAGES/scim-hangul.mo [ 348s] installing ja.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/ja/LC_MESSAGES/scim-hangul.mo [ 348s] installing ko.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/ko/LC_MESSAGES/scim-hangul.mo [ 348s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/nl/LC_MESSAGES/scim-hangul.mo [ 348s] installing pa.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/pa/LC_MESSAGES/scim-hangul.mo [ 348s] installing zh_CN.gmo as /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/locale/zh_CN/LC_MESSAGES/scim-hangul.mo [ 348s] if test "scim-hangul" = "gettext-tools"; then \ [ 348s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/gettext/po; \ [ 348s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 348s] /usr/bin/install -c -m 644 ./$file \ [ 348s] /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/gettext/po/$file; \ [ 348s] done; \ [ 348s] for file in Makevars; do \ [ 348s] rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/gettext/po/$file; \ [ 348s] done; \ [ 348s] else \ [ 348s] : ; \ [ 348s] fi [ 348s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/po' [ 348s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] make[2]: Nothing to be done for `install-exec-am'. [ 348s] make[2]: Nothing to be done for `install-data-am'. [ 348s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0' [ 348s] + rm -f /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/info/dir [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm -regex '.*\.la$' [ 348s] + xargs rm -f -- [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm -regex '.*\.a$' [ 348s] + xargs rm -f -- [ 348s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/license [ 348s] + install -m0644 /home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0/COPYING /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/share/license/ise-engine-hangul [ 348s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/ise-engine-hangul-0.4.0 [ 348s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm/usr/lib/scim-1.0/1.4.0/IMEngine/hangul.so [ 348s] 59 blocks [ 348s] + /usr/lib/rpm/check-buildroot [ 348s] + /usr/lib/rpm//brp-compress [ 348s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 349s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 349s] + /usr/lib/rpm/brp-python-hardlink [ 349s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 349s] Processing files: ise-engine-hangul-0.4.0-3.1.armv7l [ 349s] Provides: hangul.so [ 349s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 349s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libhangul.so.1 libscim-1.0.so.8 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.9) [ 349s] Processing files: ise-engine-hangul-debuginfo-0.4.0-3.1.armv7l [ 349s] Processing files: ise-engine-hangul-debugsource-0.4.0-3.1.armv7l [ 349s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 349s] Wrote: /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-0.4.0-3.1.src.rpm [ 349s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-0.4.0-3.1.armv7l.rpm [ 349s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-0.4.0-3.1.armv7l.rpm [ 349s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-0.4.0-3.1.armv7l.rpm [ 349s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.an0QH5 [ 349s] + umask 022 [ 349s] + cd /home/abuild/rpmbuild/BUILD [ 349s] + cd ise-engine-hangul-0.4.0 [ 349s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/ise-engine-hangul-0.4.0-3.1.arm [ 349s] + exit 0 [ 349s] ... checking for files with abuild user/group [ 349s] ... creating baselibs [ 350s] ... saving built statistics [ 350s] /.build/build: line 3144: mount: command not found [ 350s] ERROR: no root disk device found, yet another new device name? [ 350s] ls: cannot access /sys/block/: No such file or directory [ 350s] /.build/build: line 3159: umount: command not found [ 350s] ... saving built packages [ 350s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-0.4.0-3.1.armv7l.rpm [ 350s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debuginfo-0.4.0-3.1.armv7l.rpm [ 350s] /home/abuild/rpmbuild/RPMS/armv7l/ise-engine-hangul-debugsource-0.4.0-3.1.armv7l.rpm [ 350s] /home/abuild/rpmbuild/SRPMS/ise-engine-hangul-0.4.0-3.1.src.rpm [ 350s] /home/abuild/rpmbuild/OTHER/_statistics [ 350s] [ 350s] w20 finished "build ise-engine-hangul.spec" at Wed Feb 4 14:25:20 UTC 2015. [ 350s] [ 353s] [ 339.335941] SysRq : Power Off [ 353s] [ 339.444462] Power down. [ 354s] build: extracting built packages... [ 354s] ise-engine-hangul-0.4.0-3.1.armv7l.rpm [ 354s] ise-engine-hangul-debuginfo-0.4.0-3.1.armv7l.rpm [ 354s] ise-engine-hangul-debugsource-0.4.0-3.1.armv7l.rpm [ 354s] ise-engine-hangul-0.4.0-3.1.src.rpm [ 354s] _statistics Retried build at Thu Feb 5 23:08:25 2015 returned same result, skipped