[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:launchpad.spec" at Wed Feb 4 13:24:31 UTC 2015. [ 0s] [ 0s] Building launchpad for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'dc3d075a49fb4f1ba1612ff25c62af64' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:launchpad.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:launchpad.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:launchpad.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: pulseaudio-libs -> pulseaudio [ 3s] breaking dependency pulseaudio -> pulseaudio-libs [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] cycle: system-resource -> libresourced [ 3s] breaking dependency libresourced -> system-resource [ 4s] cycle: system-resource -> system-resource-resourced [ 4s] breaking dependency system-resource-resourced -> system-resource [ 4s] cycle: libremix -> libremix-devel [ 4s] breaking dependency libremix-devel -> libremix [ 4s] cycle: pkgmgr-info -> pkgmgr-info-parser [ 4s] breaking dependency pkgmgr-info -> pkgmgr-info-parser [ 4s] done [ 9s] booting kvm ... [ 9s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 14s] Creating device nodes with udev [ 18s] Waiting for device /dev/vda to appear: ok [ 18s] fsck from util-linux 2.21.2 [ 18s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 18s] /dev/vda: clean, 4962/2392064 files, 246735/9568256 blocks [ 18s] fsck succeeded. Mounting root device read-write. [ 18s] Mounting root /dev/vda [ 18s] mount -o rw -t ext4 /dev/vda /root [ 19s] replacing /etc/mtab with symlink to /proc/self/mounts [ 19s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 28s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 29s] switching personality to 8... [ 29s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 29s] /.build/build: line 770: mount: command not found [ 32s] swapon on /dev/vdb [ 33s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 33s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 39s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 41s] logging output to //.build.log... [ 42s] processing specfile /.build-srcdir/_service:gbs:launchpad.spec ... [ 43s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:launchpad.spec build rpmlint-Factory ... [ 55s] running rpm-x86-arm postinstall script [ 56s] running rpm-libs-x86-arm postinstall script [ 56s] running tizen-accelerator postinstall script [ 57s] running bash-x86-arm postinstall script [ 57s] initializing rpm db... [ 73s] [1/280] installing cross-armv7l-platformfile-0.0.1-3.1 [ 74s] [2/280] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 76s] [3/280] installing libX11-common-1.5.0-3.1 [ 77s] [4/280] installing tizen-release-2.2.0-3.1 [ 78s] [5/280] installing tzdata-2013h-3.1 [ 79s] [6/280] installing libgcc-4.6.4-3.14 [ 79s] [7/280] installing setup-0.1-3.1 [ 81s] [8/280] installing filesystem-0.1-3.1 [ 93s] warning: group lock does not exist - using root [ 93s] [9/280] installing eglibc-2.13-3.9 [ 96s] [10/280] installing libstdc++-4.6.4-3.14 [ 99s] [11/280] installing eglibc-common-2.13-3.9 [ 112s] [12/280] installing iniparser-2.17-3.1 [ 112s] [13/280] installing libstdc++-devel-4.6.4-3.14 [ 113s] [14/280] installing opengl-es-virtual-drv-0.1.6-3.2 [ 114s] [15/280] installing bash-4.1-3.1 [ 114s] [16/280] installing bzip2-libs-1.0.5-3.2 [ 114s] [17/280] installing c-ares-1.10.0_4-3.1 [ 115s] [18/280] installing capi-base-common-0.1.7-3.1 [ 115s] [19/280] installing cpio-2.8-3.1 [ 115s] [20/280] installing diffutils-3.0-3.1 [ 116s] [21/280] installing e2fsprogs-libs-1.41.9-3.1 [ 117s] [22/280] installing elfutils-libelf-0.152-3.8 [ 117s] [23/280] installing embryo-1.6.0+svn.76491slp2+build07-5.1 [ 117s] [24/280] installing expat-2.0.1-3.2 [ 117s] [25/280] installing fdupes-1.40-3.1 [ 118s] [26/280] installing findutils-4.2.31-3.1 [ 119s] [27/280] installing fribidi-0.19.6-3.1 [ 119s] [28/280] installing gdbm-1.8.3-3.3 [ 119s] [29/280] installing libXau-1.0.7-3.1 [ 120s] [30/280] installing libasound-1.0.25-1.0.25-2.1 [ 120s] [31/280] installing libattr-2.4.44-3.4 [ 120s] [32/280] installing libffi-3.0.9-3.1 [ 121s] [33/280] installing libflac-1.2.1+slp2+build04-3.1 [ 121s] [34/280] installing libgomp-4.6.4-3.14 [ 122s] [35/280] installing libidn-1.15-3.1 [ 123s] [36/280] installing libjpeg-turbo-1.2.0-3.1 [ 123s] [37/280] installing libjson-0.10.1-2.1 [ 123s] [38/280] installing liblua-5.1.4-3.2 [ 123s] [39/280] installing libogg-1.2.1-3.1 [ 123s] [40/280] installing libtool-ltdl-2.2.6b-3.2 [ 123s] [41/280] installing libunwind-1.1-3.2 [ 124s] [42/280] installing libuuid-2.20.2-3.1 [ 124s] [43/280] installing lzo-2.03-3.3 [ 124s] [44/280] installing m4-1.4.14-3.1 [ 124s] [45/280] installing net-tools-1.60-3.1 [ 125s] [46/280] installing nspr-4.9-3.6 [ 125s] [47/280] installing nss-softokn-freebl-3.12.9-3.11 [ 125s] [48/280] installing openssl-1.0.1k-3.2 [ 126s] [49/280] installing patch-2.6-3.1 [ 126s] [50/280] installing pixman-0.28.2-3.1 [ 127s] [51/280] installing pkg-config-0.25-2.2 [ 127s] [52/280] installing popt-1.16-3.2 [ 127s] [53/280] installing readline-5.2-3.2 [ 127s] [54/280] installing sed-4.1.5-3.1 [ 128s] [55/280] installing smack-1.0+s14-3.2 [ 128s] [56/280] installing speex-1.2rc1-3.1 [ 129s] [57/280] installing sqlite-3.7.13-3.2 [ 129s] [58/280] installing systemd-libs-210-7.1 [ 129s] [59/280] installing tar-1.17-3.2 [ 129s] [60/280] installing xz-libs-5.0.3-3.3 [ 130s] [61/280] installing zlib-1.2.5-3.8 [ 131s] [62/280] installing gmp-4.2.1-3.2 [ 131s] [63/280] installing libpcre-7.7-3.3 [ 132s] [64/280] installing ncurses-libs-5.7-3.2 [ 132s] [65/280] installing build-compare-2009.10.14-3.5 [ 133s] [66/280] installing qemu.x86_64-1.2-5.1 [ 137s] [67/280] installing vconf-internal-keys-devel-0.0.150-3.1 [ 137s] [68/280] installing capi-base-common-devel-0.1.7-3.1 [ 137s] [69/280] installing eglibc-headers-2.13-3.9 [ 138s] [70/280] installing embryo-devel-1.6.0+svn.76491slp2+build07-5.1 [ 138s] [71/280] installing fribidi-devel-0.19.6-3.1 [ 139s] [72/280] installing libcap-2.21-3.2 [ 139s] [73/280] installing liblua-devel-5.1.4-3.2 [ 140s] [74/280] installing pixman-devel-0.28.2-3.1 [ 140s] [75/280] installing smack-devel-1.0+s14-3.2 [ 140s] [76/280] installing sqlite-devel-3.7.13-3.2 [ 140s] [77/280] installing unzip-6.0-3.4 [ 140s] [78/280] installing zlib-devel-1.2.5-3.8 [ 140s] [79/280] installing freetype-2.4.9-3.1 [ 141s] [80/280] installing grep-2.5.1a-3.1 [ 141s] [81/280] installing libacl-2.2.49-3.2 [ 142s] [82/280] installing libfile-5.04-3.2 [ 143s] [83/280] installing libiri-1.7-3.1 [ 144s] [84/280] installing libpng-1.2.50-3.1 [ 144s] [85/280] installing libvorbis-1.2.3-3.1 [ 144s] [86/280] installing libxcb-1.8.1-3.1 [ 145s] [87/280] installing libxml2-2.7.8-3.2 [ 145s] [88/280] installing lzo-minilzo-2.03-3.3 [ 145s] [89/280] installing make-3.82-3.2 [ 146s] [90/280] installing mpfr-3.0.0-3.2 [ 146s] [91/280] installing ncurses-5.7-3.2 [ 146s] [92/280] installing bzip2-1.0.5-3.2 [ 147s] [93/280] installing glib2-2.32.3-3.1 [ 147s] [94/280] installing kmod-libs-15-3.1 [ 147s] [95/280] installing libblkid-2.20.2-3.1 [ 147s] [96/280] installing libicu-51-3.1 [ 148s] [97/280] installing smack-utils-1.0+s14-3.2 [ 148s] [98/280] installing xz-5.0.3-3.3 [ 148s] [99/280] installing binutils-2.22-3.4 [ 148s] [100/280] installing elfutils-libs-0.152-3.8 [ 148s] [101/280] installing libcurl-7.28.1_26-3.1 [ 149s] [102/280] installing nss-3.12.9-3.11 [ 149s] [103/280] installing perl-5.12.1-3.3 [ 151s] [104/280] installing ncurses-base-5.7-3.2 [ 151s] [105/280] installing perl-HTML-Tagset-3.20-3.1 [ 151s] [106/280] installing perl-IO-Compress-Base-2.008-3.3 [ 151s] [107/280] installing perl-Module-Pluggable-3.60-3.3 [ 151s] [108/280] installing perl-Pod-Escapes-1.04-3.3 [ 151s] [109/280] installing perl-TimeDate-1.20-3.1 [ 151s] [110/280] installing eglibc-devel-2.13-3.9 [ 152s] [111/280] installing libicu-devel-51-3.1 [ 152s] [112/280] installing smack-privilege-config-1.0.8-3.1 [ 152s] /var/tmp/rpm-tmp.Z5VURW: line 2: which: command not found [ 152s] api_feature_loader not present [ 152s] [113/280] installing file-5.04-3.2 [ 152s] [114/280] installing lzo-devel-2.03-3.3 [ 152s] [115/280] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 152s] [116/280] installing perl-devel-5.12.1-3.3 [ 152s] [117/280] installing perl-libs-5.12.1-3.3 [ 153s] [118/280] installing coreutils-6.9-3.3 [ 154s] [119/280] installing freetype-devel-2.4.9-3.1 [ 154s] [120/280] installing libX11-1.5.0-3.1 [ 154s] [121/280] installing libdlog-0.4.1-3.1 [ 154s] [122/280] installing libmount-2.20.2-3.1 [ 154s] [123/280] installing mpc-0.9-3.2 [ 154s] [124/280] installing xz-lzma-compat-5.0.3-3.3 [ 154s] [125/280] installing elfutils-0.152-3.8 [ 155s] [126/280] installing harfbuzz-0.9.7-3.1 [ 155s] [127/280] installing nss-sysinit-3.12.9-3.11 [ 155s] [128/280] installing libsndfile-1.0.28-3.1 [ 155s] [129/280] installing libarchive-2.8.3-3.1 [ 156s] [130/280] installing rpm-libs-4.9.1-4.1 [ 156s] [131/280] installing harfbuzz-devel-0.9.7-3.1 [ 156s] [132/280] installing libsndfile-devel-1.0.28-3.1 [ 156s] [133/280] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 156s] [134/280] installing perl-Pod-Simple-3.07-3.3 [ 156s] [135/280] installing perl-Test-Simple-0.80-3.3 [ 156s] [136/280] installing tizen-accelerator-1.0.1-3.1 [ 157s] [137/280] installing eina-1.7.1+svn.77445+build35-3.1 [ 157s] [138/280] installing giflib-4.1.6-3.1 [ 157s] [139/280] installing libXcomposite-0.4.4-3.1 [ 157s] [140/280] installing libXdamage-1.1.3-3.1 [ 157s] [141/280] installing libXext-1.3.1-3.1 [ 158s] [142/280] installing libXfixes-5.0-3.1 [ 158s] [143/280] installing libXrender-0.9.7-3.1 [ 158s] [144/280] installing libdlog-devel-0.4.1-3.1 [ 158s] [145/280] installing libidn-devel-1.15-3.1 [ 158s] [146/280] installing perl-IO-Compress-Zlib-2.008-3.3 [ 158s] [147/280] installing perl-Test-Harness-3.12-3.3 [ 159s] [148/280] installing gawk-3.1.5-3.2 [ 159s] [149/280] installing gzip-1.3.12-3.1 [ 159s] [150/280] installing xdgmime-0.0.12-3.1 [ 159s] [151/280] installing build-2011.01.10a-3.1 [ 159s] [152/280] installing bundle-0.1.35-3.1 [ 160s] [153/280] installing rpm-4.9.1-4.1 [ 160s] [154/280] installing cpp-4.6.4-3.14 [ 161s] [155/280] installing libslp-db-util-0.1.8-3.1 [ 161s] [156/280] installing sys-assert-0.3.2-3.1 [ 161s] [157/280] installing dbus-1.6.4-3.1 [ 161s] [158/280] installing util-linux-2.20.2-3.1 [ 162s] [159/280] installing cmake-2.8.5-3.1 [ 163s] [160/280] installing fontconfig-2.9.0-3.1 [ 165s] /opt/var/cache/fontconfig/*: No such file or directory [ 166s] [161/280] installing glib2-devel-2.32.3-3.1 [ 166s] [162/280] installing libprivilege-control-0.0.89-3.1 [ 170s] Applying sql update files on db [ 170s] /opt/dbspace/.rules-db.db3 [ 170s] Creating database from scratch [ 170s] Loading permissions for all versions from '/usr/share/privilege-control/' [ 170s] Done. [ 170s] Loading additional rules from file '/usr/share/privilege-control/ADDITIONAL_RULES.smack' [ 170s] Done. [ 170s] [163/280] installing bundle-devel-0.1.35-3.1 [ 170s] [164/280] installing xdgmime-devel-0.0.12-3.1 [ 170s] [165/280] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 170s] [166/280] installing dbus-libs-1.6.4-3.1 [ 170s] [167/280] installing eglibc-x86-arm-2.13-2.3 [ 171s] [168/280] installing eina-devel-1.7.1+svn.77445+build35-3.1 [ 171s] [169/280] installing elfutils-libelf-x86-arm-0.152-2.1 [ 171s] [170/280] installing elfutils-libs-x86-arm-0.152-2.3 [ 171s] [171/280] installing fontconfig-devel-2.9.0-3.1 [ 171s] [172/280] installing gmp-x86-arm-4.2.1-2.1 [ 172s] [173/280] installing libacl-x86-arm-2.2.49-2.1 [ 172s] [174/280] installing libattr-x86-arm-2.4.44-2.1 [ 172s] [175/280] installing libcap-x86-arm-2.21-2.1 [ 172s] [176/280] installing libfile-x86-arm-5.04-2.2 [ 172s] [177/280] installing libgcc-x86-arm-4.6.4-2.1 [ 172s] [178/280] installing liblua-x86-arm-5.1.4-2.1 [ 172s] [179/280] installing libprivilege-control-devel-0.0.89-3.1 [ 172s] [180/280] installing mpc-x86-arm-0.9-2.1 [ 173s] [181/280] installing mpfr-x86-arm-3.0.0-2.1 [ 173s] [182/280] installing ncurses-libs-x86-arm-5.7-2.2 [ 173s] [183/280] installing nspr-x86-arm-4.9-2.3 [ 173s] [184/280] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 173s] [185/280] installing nss-x86-arm-3.12.9-2.3 [ 173s] [186/280] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 173s] [187/280] installing popt-x86-arm-1.16-2.1 [ 174s] [188/280] installing rpm-libs-x86-arm-4.9.1-2.2 [ 174s] [189/280] installing sqlite-x86-arm-3.7.13-2.1 [ 174s] [190/280] installing xz-libs-x86-arm-5.0.3-2.1 [ 174s] [191/280] installing zlib-x86-arm-1.2.5-2.1 [ 175s] [192/280] installing ecore-1.7.1+svn.77580+build125-5.1 [ 175s] [193/280] installing libXgesture-0.1.1-3.1 [ 175s] [194/280] installing libXi-1.6.1-3.1 [ 188s] [195/280] installing libXinerama-1.1.2-3.1 [ 203s] [196/280] installing libXtst-1.2.0-3.1 [ 204s] [197/280] installing libXv-1.0.7-3.1 [ 205s] [198/280] installing libcurl-devel-7.28.1_26-3.1 [ 205s] [199/280] installing eet-1.7.1+svn.77495+build14-5.1 [ 205s] [200/280] installing libXcursor-1.1.13-3.1 [ 206s] [201/280] installing libXrandr-1.4.0-3.1 [ 206s] [202/280] installing libremix-devel-0.2.4+build14-3.1 [ 206s] [203/280] installing librua-0.1.8-3.1 [ 206s] [204/280] installing libslp-db-util-devel-0.1.8-3.1 [ 207s] [205/280] installing systemd-210-7.1 [ 209s] [206/280] installing gcc-4.6.4-3.14 [ 211s] [207/280] installing rpm-build-4.9.1-4.1 [ 211s] [208/280] installing libjournal-0.1.0-2.1 [ 212s] [209/280] installing systemd-devel-210-7.1 [ 212s] [210/280] installing dbus-devel-1.6.4-3.1 [ 212s] [211/280] installing perl-CPAN-1.9205-3.3 [ 213s] [212/280] installing bash-x86-arm-4.1-2.1 [ 213s] [213/280] installing dbus-glib-0.100-3.1 [ 213s] [214/280] installing ecore-imf-1.7.1+svn.77580+build125-5.1 [ 213s] [215/280] installing ecore-input-1.7.1+svn.77580+build125-5.1 [ 214s] [216/280] installing eet-devel-1.7.1+svn.77495+build14-5.1 [ 214s] [217/280] installing fdupes-x86-arm-1.40-2.1 [ 214s] [218/280] installing findutils-x86-arm-4.2.31-2.1 [ 215s] [219/280] installing gawk-x86-arm-3.1.5-2.2 [ 215s] [220/280] installing gzip-x86-arm-1.3.12-2.1 [ 215s] [221/280] installing libremix-0.2.4+build14-3.1 [ 215s] [222/280] installing make-x86-arm-3.82-2.1 [ 216s] [223/280] installing sed-x86-arm-4.1.5-2.1 [ 216s] [224/280] installing tar-x86-arm-1.17-2.2 [ 216s] [225/280] installing diffutils-x86-arm-3.0-2.1 [ 217s] [226/280] installing patch-x86-arm-2.6-2.1 [ 218s] [227/280] installing autoconf-2.68-3.1 [ 219s] [228/280] installing coreutils-x86-arm-6.9-2.1 [ 223s] [229/280] installing ecore-con-1.7.1+svn.77580+build125-5.1 [ 223s] [230/280] installing file-x86-arm-5.04-2.1 [ 224s] [231/280] installing libslp-utilx-0.4.5-3.1 [ 225s] [232/280] installing vconf-0.2.83-3.1 [ 225s] Failed to get D-Bus connection: Unknown error 4294967295 [ 225s] warning: %post(vconf-0.2.83-3.1.armv7l) scriptlet failed, exit status 1 [ 225s] [233/280] installing bluez-5.16_8-3.1 [ 225s] [234/280] installing elfutils-x86-arm-0.152-2.3 [ 226s] [235/280] installing gcc-c++-4.6.4-3.14 [ 227s] [236/280] installing security-server-0.0.125-3.1 [ 228s] Failed to get D-Bus connection: Unknown error 4294967295 [ 228s] Failed to get D-Bus connection: Unknown error 4294967295 [ 228s] [237/280] installing evas-1.7.1+svn.77561+build187-5.1 [ 228s] [238/280] installing rpm-x86-arm-4.9.1-2.2 [ 228s] /bin/rpm.orig-arm already present - skipping. [ 228s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 228s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 228s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 228s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 228s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 229s] [239/280] installing rpm-build-x86-arm-4.9.1-2.2 [ 229s] [240/280] installing vconf-keys-devel-0.2.83-3.1 [ 229s] [241/280] installing automake-1.11.1-3.1 [ 230s] [242/280] installing ecore-fb-1.7.1+svn.77580+build125-5.1 [ 230s] [243/280] installing ecore-file-1.7.1+svn.77580+build125-5.1 [ 230s] [244/280] installing ecore-imf-evas-1.7.1+svn.77580+build125-5.1 [ 230s] [245/280] installing ecore-ipc-1.7.1+svn.77580+build125-5.1 [ 231s] [246/280] installing libsecurity-server-client-0.0.125-3.1 [ 231s] [247/280] installing ecore-input-evas-1.7.1+svn.77580+build125-5.1 [ 231s] [248/280] installing edbus-1.6.0+svn.76526slp2+build10-3.1 [ 232s] [249/280] installing ail-0.2.95-3.1 [ 233s] [250/280] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 238s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 238s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 239s] [251/280] installing dbus-glib-devel-0.100-3.1 [ 241s] [252/280] installing evas-devel-1.7.1+svn.77561+build187-5.1 [ 241s] [253/280] installing pkgmgr-info-0.0.230-3.1 [ 242s] [254/280] installing ecore-x-1.7.1+svn.77580+build125-5.1 [ 243s] [255/280] installing libtool-2.2.6b-3.2 [ 243s] [256/280] installing vconf-devel-0.2.83-3.1 [ 243s] [257/280] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 245s] [258/280] installing efreet-1.7.1+svn.77412+build14-3.1 [ 246s] [259/280] installing libdeviced-1.0.0-3.1 [ 246s] [260/280] installing libresourced-0.2.86-3.1 [ 247s] [261/280] installing pkgmgr-info-parser-0.0.230-3.1 [ 248s] [262/280] installing ecore-evas-1.7.1+svn.77580+build125-5.1 [ 248s] [263/280] installing pulseaudio-4.0.145-7.1 [ 248s] Failed to get D-Bus connection: Unknown error 4294967295 [ 248s] Failed to get D-Bus connection: Unknown error 4294967295 [ 248s] warning: %post(pulseaudio-4.0.145-7.1.armv7l) scriptlet failed, exit status 1 [ 249s] [264/280] installing libdeviced-devel-1.0.0-3.1 [ 250s] [265/280] installing ail-devel-0.2.95-3.1 [ 251s] [266/280] installing pulseaudio-libs-4.0.145-7.1 [ 252s] [267/280] installing edje-1.7.1+svn.77330+build179-3.1 [ 254s] [268/280] installing system-resource-resourced-0.2.86-3.1 [ 254s] [269/280] installing ecore-devel-1.7.1+svn.77580+build125-5.1 [ 255s] [270/280] installing aul-0.2.3.0-3.1 [ 256s] [271/280] installing pulseaudio-libs-devel-4.0.145-7.1 [ 257s] [272/280] installing system-resource-0.2.86-3.1 [ 257s] [273/280] installing aul-devel-0.2.3.0-3.1 [ 257s] [274/280] installing ethumb-1.6.0+svn.75994slp2+build09-3.1 [ 258s] [275/280] installing edbus-devel-1.6.0+svn.76526slp2+build10-3.1 [ 259s] [276/280] installing efreet-devel-1.7.1+svn.77412+build14-3.1 [ 259s] [277/280] installing edje-devel-1.7.1+svn.77330+build179-3.1 [ 259s] [278/280] installing elementary-1.7.1+svn.77535+build567-3.1 [ 262s] [279/280] installing ethumb-devel-1.6.0+svn.75994slp2+build09-3.1 [ 262s] [280/280] installing elementary-devel-1.7.1+svn.77535+build567-3.1 [ 263s] removing nis flags from //etc/nsswitch.conf... [ 263s] now finalizing build dir... [ 263s] /.build/build: line 2585: mount: command not found [ 263s] /.build/build: line 2586: mount: command not found [ 269s] build target is armv7l-tizen-linux [ 269s] ----------------------------------------------------------------- [ 269s] I have the following modifications for launchpad.spec: [ 269s] 5c5 [ 269s] < Release: 1 [ 269s] --- [ 269s] > Release: 2.1 [ 269s] ----------------------------------------------------------------- [ 269s] ----- building launchpad.spec (user abuild) [ 269s] ----------------------------------------------------------------- [ 269s] ----------------------------------------------------------------- [ 269s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/dc3d075a49fb4f1ba1612ff25c62af64-launchpad' /home/abuild/rpmbuild/SOURCES/launchpad.spec [ 269s] Building target platforms: armv7l-tizen-linux [ 269s] Building for target armv7l-tizen-linux [ 269s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.0VcKnt [ 269s] + umask 022 [ 269s] + cd /home/abuild/rpmbuild/BUILD [ 269s] + LANG=C [ 269s] + export LANG [ 269s] + unset DISPLAY [ 269s] + cd /home/abuild/rpmbuild/BUILD [ 269s] + rm -rf launchpad-0.0.20 [ 269s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/launchpad-0.0.20.tar.gz [ 269s] + /bin/tar -xf - [ 269s] + STATUS=0 [ 269s] + '[' 0 -ne 0 ']' [ 269s] + cd launchpad-0.0.20 [ 269s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 269s] + exit 0 [ 269s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.zBzr2i [ 269s] + umask 022 [ 269s] + cd /home/abuild/rpmbuild/BUILD [ 269s] + cd launchpad-0.0.20 [ 269s] + LANG=C [ 269s] + export LANG [ 269s] + unset DISPLAY [ 269s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 269s] + export CFLAGS [ 269s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 269s] + export CXXFLAGS [ 269s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 269s] + export FFLAGS [ 269s] + LD_AS_NEEDED=1 [ 269s] + export LD_AS_NEEDED [ 269s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 269s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 269s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 269s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 269s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE' [ 269s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE' [ 269s] + _APPFW_FEATURE_PROCESS_POOL=ON [ 269s] + _APPFW_FEATURE_PROCESS_POOL_COMMON=ON [ 269s] + _APPFW_FEATURE_PRIORITY_CHANGE=ON [ 269s] + cmake -DCMAKE_INSTALL_PREFIX=/usr -D_APPFW_FEATURE_PROCESS_POOL:BOOL=ON -D_APPFW_FEATURE_PROCESS_POOL_COMMON:BOOL=ON -D_APPFW_FEATURE_PROCESS_POOL_HW_RENDERING:BOOL= -D_APPFW_FEATURE_PRIORITY_CHANGE:BOOL=ON -D_APPFW_FEATURE_NATIVE_LAUNCHPAD:BOOL= [ 269s] -- The C compiler identification is GNU [ 270s] -- The CXX compiler identification is GNU [ 270s] -- Check for working C compiler: /usr/bin/gcc [ 270s] -- Check for working C compiler: /usr/bin/gcc -- works [ 270s] -- Detecting C compiler ABI info [ 270s] -- Detecting C compiler ABI info - done [ 270s] -- Check for working CXX compiler: /usr/bin/c++ [ 271s] -- Check for working CXX compiler: /usr/bin/c++ -- works [ 271s] -- Detecting CXX compiler ABI info [ 272s] -- Detecting CXX compiler ABI info - done [ 272s] -- checking for modules 'aul;dlog;ecore;libprivilege-control;libsmack;deviced;elementary;libsystemd-daemon' [ 272s] -- found aul, version 0.1.0 [ 272s] -- found dlog, version 1.0 [ 273s] -- found ecore, version 1.7.99.0 [ 273s] -- found libprivilege-control, version 0.0.2 [ 273s] -- found libsmack, version 1.0 [ 273s] -- found deviced, version 0.1.0 [ 273s] -- found elementary, version 1.7.99.0 [ 273s] -- found libsystemd-daemon, version 210 [ 274s] -- Configuring done [ 274s] -- Generating done [ 274s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/launchpad-0.0.20 [ 274s] + make -j4 [ 274s] Scanning dependencies of target launchpad-process-pool [ 275s] [100%] [100%] [100%] Building C object CMakeFiles/launchpad-process-pool.dir/process_pool/process_pool.c.o [ 275s] Building C object CMakeFiles/launchpad-process-pool.dir/process_pool/launchpad.c.o [ 275s] Building C object CMakeFiles/launchpad-process-pool.dir/process_pool/smack_util.c.o [ 275s] In file included from /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/process_pool.h:25:0, [ 275s] from /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/process_pool.c:26: [ 275s] /usr/include/aul/launch/app_sock.h:103:54: warning: 'struct ucred' declared inside parameter list [enabled by default] [ 275s] In file included from /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/launchpad.c:46:0: [ 275s] /usr/include/aul/launchpad/sigchild.h: In function '__launchpad_sig_child': [ 275s] /usr/include/aul/launchpad/sigchild.h:144:2: warning: implicit declaration of function 'waitpid' [-Wimplicit-function-declaration] [ 275s] /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/launchpad.c: At top level: [ 275s] /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/launchpad.c:86:2: warning: excess elements in array initializer [enabled by default] [ 275s] /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/process_pool/launchpad.c:86:2: warning: (near initialization for '__candidate') [enabled by default] [ 276s] Linking C executable launchpad-process-pool [ 276s] [100%] Built target launchpad-process-pool [ 276s] + exit 0 [ 276s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.IwOEZy [ 276s] + umask 022 [ 276s] + cd /home/abuild/rpmbuild/BUILD [ 276s] + cd launchpad-0.0.20 [ 276s] + LANG=C [ 276s] + export LANG [ 276s] + unset DISPLAY [ 276s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 276s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 276s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 276s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm install [ 276s] [100%] Built target launchpad-process-pool [ 276s] Install the project... [ 276s] -- Install configuration: "" [ 276s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/bin/launchpad-process-pool [ 276s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/share/aul/launchpad-process-pool-preload-list.txt [ 276s] + rm -f /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/share/info/dir [ 276s] + xargs rm -f -- [ 276s] + find /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm -regex '.*\.la$' [ 277s] + find /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm -regex '.*\.a$' [ 277s] + xargs rm -f -- [ 277s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/lib/systemd/system/graphical.target.wants [ 277s] + install -m0644 /home/abuild/rpmbuild/SOURCES/launchpad-process-pool.service /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/lib/systemd/system/launchpad-process-pool.service [ 277s] + ln -s ../launchpad-process-pool.service /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/lib/systemd/system/graphical.target.wants/launchpad-process-pool.service [ 277s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/share/license [ 277s] + cp /home/abuild/rpmbuild/BUILD/launchpad-0.0.20/LICENSE /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/share/license/launchpad [ 277s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/launchpad-0.0.20 [ 277s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm/usr/bin/launchpad-process-pool [ 277s] 90 blocks [ 277s] + /usr/lib/rpm/check-buildroot [ 277s] + /usr/lib/rpm//brp-compress [ 277s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 277s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 277s] + /usr/lib/rpm/brp-python-hardlink [ 277s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 277s] Processing files: launchpad-0.0.20-2.1.armv7l [ 277s] Aptk: PG1hbmlmZXN0PgoJPGRlZmluZT4KCQk8ZG9tYWluIG5hbWU9ImxhdW5jaHBhZCIv [ 277s] PgoJCTxyZXF1ZXN0PgoJCQk8c21hY2sgcmVxdWVzdD0iYXVsOjpsYXVuY2giIHR5 [ 277s] cGU9IngiLz4KCQkJPHNtYWNrIHJlcXVlc3Q9ImF1bDo6dGVybWluYXRlIiB0eXBl [ 277s] PSJ4Ii8+CgkJCTxzbWFjayByZXF1ZXN0PSJzZWN1cml0eS1zZXJ2ZXI6OmFwaS1w [ 277s] cml2aWxlZ2UtYnktcGlkIiB0eXBlPSJ3Ii8+CgkJCTxzbWFjayByZXF1ZXN0PSJz [ 277s] eXN0ZW06OnNoYXJlIiB0eXBlPSJyd3hhdCIvPgoJCQk8c21hY2sgcmVxdWVzdD0i [ 277s] c291bmRfc2VydmVyIiB0eXBlPSJyd3giLz4KCQkJPHNtYWNrIHJlcXVlc3Q9InN5 [ 277s] c3RlbTo6aG9tZWRpciIgdHlwZT0icnd4YXQiLz4KCQkJPHNtYWNrIHJlcXVlc3Q9 [ 277s] InB1bHNlYXVkaW8iIHR5cGU9InJ3eGF0Ii8+CgkJPC9yZXF1ZXN0PgoJPC9kZWZp [ 277s] bmU+Cgk8cmVxdWVzdD4KCQk8ZG9tYWluIG5hbWU9ImxhdW5jaHBhZCIvPgoJPC9y [ 277s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 277s] [ 277s] Requires(interp): /bin/sh [ 277s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 277s] Requires(post): /bin/sh /sbin/ldconfig /usr/bin/systemctl [ 277s] Requires(preun): /usr/bin/systemctl [ 277s] Requires(postun): /sbin/ldconfig /usr/bin/systemctl [ 277s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libaul.so.0 libbundle.so.0 libc.so.6 libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdl.so.2 libdl.so.2(GLIBC_2.4) libdlog.so.0 libecore.so.1 libedje.so.1 libelementary.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libprivilege-control.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsmack.so.1 libsmack.so.1(LIBSMACK) libsqlite3.so.0 libsystemd.so.0 libsystemd.so.0(LIBSYSTEMD_209) [ 277s] Processing files: launchpad-debuginfo-0.0.20-2.1.armv7l [ 277s] Processing files: launchpad-debugsource-0.0.20-2.1.armv7l [ 277s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 277s] Wrote: /home/abuild/rpmbuild/SRPMS/launchpad-0.0.20-2.1.src.rpm [ 277s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/launchpad-0.0.20-2.1.armv7l.rpm [ 277s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/launchpad-debuginfo-0.0.20-2.1.armv7l.rpm [ 277s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/launchpad-debugsource-0.0.20-2.1.armv7l.rpm [ 277s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.VDcb4a [ 277s] + umask 022 [ 277s] + cd /home/abuild/rpmbuild/BUILD [ 277s] + cd launchpad-0.0.20 [ 277s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/launchpad-0.0.20-2.1.arm [ 277s] + exit 0 [ 277s] ... checking for files with abuild user/group [ 277s] ... creating baselibs [ 278s] ... saving built statistics [ 278s] /.build/build: line 3144: mount: command not found [ 278s] ERROR: no root disk device found, yet another new device name? [ 278s] ls: cannot access /sys/block/: No such file or directory [ 278s] /.build/build: line 3159: umount: command not found [ 278s] ... saving built packages [ 279s] /home/abuild/rpmbuild/RPMS/armv7l/launchpad-0.0.20-2.1.armv7l.rpm [ 281s] /home/abuild/rpmbuild/RPMS/armv7l/launchpad-debuginfo-0.0.20-2.1.armv7l.rpm [ 282s] /home/abuild/rpmbuild/RPMS/armv7l/launchpad-debugsource-0.0.20-2.1.armv7l.rpm [ 284s] /home/abuild/rpmbuild/SRPMS/launchpad-0.0.20-2.1.src.rpm [ 285s] /home/abuild/rpmbuild/OTHER/_statistics [ 286s] [ 286s] w20 finished "build launchpad.spec" at Wed Feb 4 13:29:15 UTC 2015. [ 286s] [ 289s] [ 277.172075] SysRq : Power Off [ 289s] [ 277.179585] Power down. [ 289s] build: extracting built packages... [ 289s] launchpad-0.0.20-2.1.armv7l.rpm [ 289s] launchpad-debuginfo-0.0.20-2.1.armv7l.rpm [ 289s] launchpad-debugsource-0.0.20-2.1.armv7l.rpm [ 289s] launchpad-0.0.20-2.1.src.rpm [ 289s] _statistics Retried build at Thu Feb 5 22:00:48 2015 returned same result, skipped