[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w13 started "build _service:gbs:libXres.spec" at Wed Feb 4 12:31:20 UTC 2015. [ 0s] [ 0s] Building libXres for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '16936cc68f4b1474c7713d583f02fcc8' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:libXres.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:libXres.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:libXres.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 0s] [9/57] preinstalling diffutils... [ 0s] [10/57] preinstalling elfutils-libelf... [ 0s] [11/57] preinstalling libattr... [ 0s] [12/57] preinstalling liblua... [ 0s] [13/57] preinstalling libstdc++... [ 0s] [14/57] preinstalling ncurses-libs... [ 0s] [15/57] preinstalling nspr... [ 0s] [16/57] preinstalling nss-softokn-freebl... [ 0s] [17/57] preinstalling popt... [ 0s] [18/57] preinstalling readline... [ 0s] [19/57] preinstalling sed... [ 0s] [20/57] preinstalling sqlite... [ 0s] [21/57] preinstalling tar... [ 0s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 1s] [35/57] preinstalling gmp-x86-arm... [ 1s] [36/57] preinstalling mpc-x86-arm... [ 1s] [37/57] preinstalling mpfr-x86-arm... [ 1s] [38/57] preinstalling bzip2-libs-x86-arm... [ 1s] [39/57] preinstalling eglibc-x86-arm... [ 1s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 1s] [41/57] preinstalling libacl-x86-arm... [ 1s] [42/57] preinstalling libattr-x86-arm... [ 1s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 8s] booting kvm ... [ 8s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 17s] Waiting for device /dev/vda to appear: ok [ 17s] fsck from util-linux 2.21.2 [ 17s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 17s] /dev/vda: clean, 4706/2392064 files, 237574/9568256 blocks [ 17s] fsck succeeded. Mounting root device read-write. [ 17s] Mounting root /dev/vda [ 17s] mount -o rw -t ext4 /dev/vda /root [ 17s] replacing /etc/mtab with symlink to /proc/self/mounts [ 17s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 18s] 2nd stage started in virtual machine [ 18s] machine type: armv7l [ 18s] switching personality to 8... [ 18s] 2nd stage started in virtual machine [ 18s] machine type: armv7l [ 18s] /.build/build: line 770: mount: command not found [ 18s] swapon on /dev/vdb [ 18s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 18s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 19s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 19s] logging output to //.build.log... [ 19s] processing specfile /.build-srcdir/_service:gbs:libXres.spec ... [ 19s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libXres.spec build rpmlint-Factory ... [ 19s] running rpm-x86-arm postinstall script [ 19s] running rpm-libs-x86-arm postinstall script [ 20s] running tizen-accelerator postinstall script [ 20s] running bash-x86-arm postinstall script [ 20s] initializing rpm db... [ 24s] [1/154] installing cross-armv7l-platformfile-0.0.1-3.1 [ 24s] [2/154] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 25s] [3/154] installing libX11-common-1.5.0-3.1 [ 25s] [4/154] installing tizen-release-2.2.0-3.1 [ 25s] [5/154] installing tzdata-2013h-3.1 [ 26s] [6/154] installing libgcc-4.6.4-3.14 [ 38s] [7/154] installing setup-0.1-3.1 [ 40s] [8/154] installing filesystem-0.1-3.1 [ 48s] warning: group lock does not exist - using root [ 48s] [9/154] installing eglibc-2.13-3.9 [ 53s] [10/154] installing libstdc++-4.6.4-3.14 [ 55s] [11/154] installing eglibc-common-2.13-3.9 [ 62s] [12/154] installing libstdc++-devel-4.6.4-3.14 [ 62s] [13/154] installing bash-4.1-3.1 [ 63s] [14/154] installing bzip2-libs-1.0.5-3.2 [ 63s] [15/154] installing cpio-2.8-3.1 [ 64s] [16/154] installing diffutils-3.0-3.1 [ 64s] [17/154] installing e2fsprogs-libs-1.41.9-3.1 [ 65s] [18/154] installing elfutils-libelf-0.152-3.8 [ 65s] [19/154] installing fdupes-1.40-3.1 [ 65s] [20/154] installing findutils-4.2.31-3.1 [ 65s] [21/154] installing gdbm-1.8.3-3.3 [ 66s] [22/154] installing libXau-1.0.7-3.1 [ 66s] [23/154] installing libattr-2.4.44-3.4 [ 66s] [24/154] installing libgomp-4.6.4-3.14 [ 66s] [25/154] installing liblua-5.1.4-3.2 [ 66s] [26/154] installing libuuid-2.20.2-3.1 [ 66s] [27/154] installing lzo-2.03-3.3 [ 66s] [28/154] installing m4-1.4.14-3.1 [ 67s] [29/154] installing net-tools-1.60-3.1 [ 67s] [30/154] installing nspr-4.9-3.6 [ 67s] [31/154] installing nss-softokn-freebl-3.12.9-3.11 [ 68s] [32/154] installing patch-2.6-3.1 [ 68s] [33/154] installing pkg-config-0.25-2.2 [ 68s] [34/154] installing popt-1.16-3.2 [ 69s] [35/154] installing readline-5.2-3.2 [ 69s] [36/154] installing sed-4.1.5-3.1 [ 69s] [37/154] installing sqlite-3.7.13-3.2 [ 70s] [38/154] installing tar-1.17-3.2 [ 70s] [39/154] installing xz-libs-5.0.3-3.3 [ 71s] [40/154] installing zlib-1.2.5-3.8 [ 71s] [41/154] installing gmp-4.2.1-3.2 [ 71s] [42/154] installing libpcre-7.7-3.3 [ 71s] [43/154] installing ncurses-libs-5.7-3.2 [ 72s] [44/154] installing build-compare-2009.10.14-3.5 [ 72s] [45/154] installing libpthread-stubs-0.3-3.1 [ 72s] [46/154] installing qemu.x86_64-1.2-5.1 [ 78s] [47/154] installing xorg-x11-proto-core-7.0.25-3.1 [ 82s] [48/154] installing xorg-x11-proto-kb-1.0.6-3.1 [ 83s] [49/154] installing xorg-x11-proto-resource-1.2.0-3.1 [ 84s] [50/154] installing xorg-x11-proto-xext-7.2.1-3.1 [ 84s] [51/154] installing xorg-x11-xutils-dev-7.7-3.1 [ 85s] [52/154] installing eglibc-headers-2.13-3.9 [ 85s] [53/154] installing libcap-2.21-3.2 [ 86s] [54/154] installing unzip-6.0-3.4 [ 87s] [55/154] installing zlib-devel-1.2.5-3.8 [ 87s] [56/154] installing grep-2.5.1a-3.1 [ 88s] [57/154] installing libacl-2.2.49-3.2 [ 89s] [58/154] installing libfile-5.04-3.2 [ 89s] [59/154] installing libxcb-1.8.1-3.1 [ 90s] [60/154] installing lzo-minilzo-2.03-3.3 [ 90s] [61/154] installing make-3.82-3.2 [ 90s] [62/154] installing mpfr-3.0.0-3.2 [ 91s] [63/154] installing ncurses-5.7-3.2 [ 91s] [64/154] installing bzip2-1.0.5-3.2 [ 91s] [65/154] installing libblkid-2.20.2-3.1 [ 92s] [66/154] installing xz-5.0.3-3.3 [ 92s] [67/154] installing binutils-2.22-3.4 [ 92s] [68/154] installing elfutils-libs-0.152-3.8 [ 92s] [69/154] installing nss-3.12.9-3.11 [ 94s] [70/154] installing perl-5.12.1-3.3 [ 104s] [71/154] installing ncurses-base-5.7-3.2 [ 104s] [72/154] installing perl-HTML-Tagset-3.20-3.1 [ 104s] [73/154] installing perl-IO-Compress-Base-2.008-3.3 [ 105s] [74/154] installing perl-Module-Pluggable-3.60-3.3 [ 105s] [75/154] installing perl-Pod-Escapes-1.04-3.3 [ 106s] [76/154] installing perl-TimeDate-1.20-3.1 [ 106s] [77/154] installing eglibc-devel-2.13-3.9 [ 106s] [78/154] installing file-5.04-3.2 [ 106s] [79/154] installing libXau-devel-1.0.7-3.1 [ 106s] [80/154] installing lzo-devel-2.03-3.3 [ 107s] [81/154] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 107s] [82/154] installing perl-devel-5.12.1-3.3 [ 109s] [83/154] installing perl-libs-5.12.1-3.3 [ 110s] [84/154] installing coreutils-6.9-3.3 [ 111s] [85/154] installing libX11-1.5.0-3.1 [ 112s] [86/154] installing libmount-2.20.2-3.1 [ 112s] [87/154] installing mpc-0.9-3.2 [ 112s] [88/154] installing xz-lzma-compat-5.0.3-3.3 [ 113s] [89/154] installing elfutils-0.152-3.8 [ 113s] [90/154] installing nss-sysinit-3.12.9-3.11 [ 117s] [91/154] installing rpm-libs-4.9.1-4.1 [ 117s] [92/154] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 118s] [93/154] installing perl-Pod-Simple-3.07-3.3 [ 118s] [94/154] installing perl-Test-Simple-0.80-3.3 [ 119s] [95/154] installing tizen-accelerator-1.0.1-3.1 [ 120s] [96/154] installing libXext-1.3.1-3.1 [ 120s] [97/154] installing perl-IO-Compress-Zlib-2.008-3.3 [ 132s] [98/154] installing perl-Test-Harness-3.12-3.3 [ 133s] [99/154] installing gawk-3.1.5-3.2 [ 133s] [100/154] installing gzip-1.3.12-3.1 [ 133s] [101/154] installing libxcb-devel-1.8.1-3.1 [ 134s] [102/154] installing build-2011.01.10a-3.1 [ 135s] [103/154] installing rpm-4.9.1-4.1 [ 135s] [104/154] installing cpp-4.6.4-3.14 [ 137s] [105/154] installing util-linux-2.20.2-3.1 [ 138s] [106/154] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 138s] [107/154] installing eglibc-x86-arm-2.13-2.3 [ 140s] [108/154] installing elfutils-libelf-x86-arm-0.152-2.1 [ 141s] [109/154] installing elfutils-libs-x86-arm-0.152-2.3 [ 141s] [110/154] installing gmp-x86-arm-4.2.1-2.1 [ 141s] [111/154] installing libacl-x86-arm-2.2.49-2.1 [ 142s] [112/154] installing libattr-x86-arm-2.4.44-2.1 [ 142s] [113/154] installing libcap-x86-arm-2.21-2.1 [ 142s] [114/154] installing libfile-x86-arm-5.04-2.2 [ 143s] [115/154] installing libgcc-x86-arm-4.6.4-2.1 [ 143s] [116/154] installing liblua-x86-arm-5.1.4-2.1 [ 144s] [117/154] installing mpc-x86-arm-0.9-2.1 [ 147s] [118/154] installing mpfr-x86-arm-3.0.0-2.1 [ 147s] [119/154] installing ncurses-libs-x86-arm-5.7-2.2 [ 147s] [120/154] installing nspr-x86-arm-4.9-2.3 [ 148s] [121/154] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 148s] [122/154] installing nss-x86-arm-3.12.9-2.3 [ 149s] [123/154] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 150s] [124/154] installing popt-x86-arm-1.16-2.1 [ 150s] [125/154] installing rpm-libs-x86-arm-4.9.1-2.2 [ 151s] [126/154] installing sqlite-x86-arm-3.7.13-2.1 [ 151s] [127/154] installing xz-libs-x86-arm-5.0.3-2.1 [ 152s] [128/154] installing zlib-x86-arm-1.2.5-2.1 [ 153s] [129/154] installing libX11-devel-1.5.0-3.1 [ 153s] [130/154] installing gcc-4.6.4-3.14 [ 154s] [131/154] installing rpm-build-4.9.1-4.1 [ 155s] [132/154] installing perl-CPAN-1.9205-3.3 [ 155s] [133/154] installing bash-x86-arm-4.1-2.1 [ 156s] [134/154] installing fdupes-x86-arm-1.40-2.1 [ 156s] [135/154] installing findutils-x86-arm-4.2.31-2.1 [ 157s] [136/154] installing gawk-x86-arm-3.1.5-2.2 [ 158s] [137/154] installing gzip-x86-arm-1.3.12-2.1 [ 159s] [138/154] installing make-x86-arm-3.82-2.1 [ 162s] [139/154] installing sed-x86-arm-4.1.5-2.1 [ 162s] [140/154] installing tar-x86-arm-1.17-2.2 [ 162s] [141/154] installing diffutils-x86-arm-3.0-2.1 [ 162s] [142/154] installing libXext-devel-1.3.1-3.1 [ 162s] [143/154] installing patch-x86-arm-2.6-2.1 [ 162s] [144/154] installing autoconf-2.68-3.1 [ 162s] [145/154] installing coreutils-x86-arm-6.9-2.1 [ 165s] [146/154] installing file-x86-arm-5.04-2.1 [ 165s] [147/154] installing elfutils-x86-arm-0.152-2.3 [ 165s] [148/154] installing gcc-c++-4.6.4-3.14 [ 166s] [149/154] installing rpm-x86-arm-4.9.1-2.2 [ 166s] /bin/rpm.orig-arm already present - skipping. [ 166s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 166s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 166s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 166s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 166s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 166s] [150/154] installing rpm-build-x86-arm-4.9.1-2.2 [ 166s] [151/154] installing automake-1.11.1-3.1 [ 166s] [152/154] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 167s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 167s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 167s] [153/154] installing libtool-2.2.6b-3.2 [ 167s] [154/154] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 168s] removing nis flags from //etc/nsswitch.conf... [ 168s] now finalizing build dir... [ 168s] /.build/build: line 2585: mount: command not found [ 168s] /.build/build: line 2586: mount: command not found [ 183s] build target is armv7l-tizen-linux [ 183s] ----------------------------------------------------------------- [ 183s] I have the following modifications for libXres.spec: [ 183s] 5c5 [ 183s] < Release: 1 [ 183s] --- [ 183s] > Release: 3.1 [ 183s] ----------------------------------------------------------------- [ 183s] ----- building libXres.spec (user abuild) [ 183s] ----------------------------------------------------------------- [ 183s] ----------------------------------------------------------------- [ 183s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/16936cc68f4b1474c7713d583f02fcc8-libXres' /home/abuild/rpmbuild/SOURCES/libXres.spec [ 183s] Building target platforms: armv7l-tizen-linux [ 183s] Building for target armv7l-tizen-linux [ 183s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.AEYeyg [ 183s] + umask 022 [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + LANG=C [ 183s] + export LANG [ 183s] + unset DISPLAY [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + rm -rf libXres-1.0.6 [ 183s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libXres-1.0.6.tar.gz [ 183s] + /bin/tar -xf - [ 183s] + STATUS=0 [ 183s] + '[' 0 -ne 0 ']' [ 183s] + cd libXres-1.0.6 [ 183s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 183s] + exit 0 [ 183s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GCX6oS [ 183s] + umask 022 [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + cd libXres-1.0.6 [ 183s] + LANG=C [ 183s] + export LANG [ 183s] + unset DISPLAY [ 183s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 183s] + export CFLAGS [ 183s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 183s] + export CXXFLAGS [ 183s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 183s] + export FFLAGS [ 183s] + LD_AS_NEEDED=1 [ 183s] + export LD_AS_NEEDED [ 183s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 183s] + export CFLAGS [ 183s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 183s] + export CXXFLAGS [ 183s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 183s] + export FFLAGS [ 183s] + autoreconf -v --install --force [ 186s] autoreconf: Entering directory `.' [ 186s] autoreconf: configure.ac: not using Gettext [ 187s] autoreconf: running: aclocal --force [ 205s] autoreconf: configure.ac: tracing [ 212s] autoreconf: running: libtoolize --copy --force [ 212s] libtoolize: putting auxiliary files in `.'. [ 212s] libtoolize: copying file `./ltmain.sh' [ 212s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 212s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 212s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 226s] autoreconf: running: /usr/bin/autoconf --force [ 238s] autoreconf: running: /usr/bin/autoheader --force [ 246s] autoreconf: running: automake --add-missing --copy --force-missing [ 250s] configure.ac:42: installing `./config.guess' [ 250s] configure.ac:42: installing `./config.sub' [ 250s] configure.ac:38: installing `./install-sh' [ 250s] configure.ac:38: installing `./missing' [ 251s] src/Makefile.am: installing `./depcomp' [ 252s] autoreconf: Leaving directory `.' [ 252s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static 'LDFLAGS= -Wl,--hash-style=both -Wl,--as-needed' [ 252s] checking for a BSD-compatible install... /usr/bin/install -c [ 253s] checking whether build environment is sane... yes [ 253s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 253s] checking for gawk... gawk [ 253s] checking whether make sets $(MAKE)... yes [ 253s] checking whether to enable maintainer-specific portions of Makefiles... no [ 253s] checking build system type... armv7l-unknown-linux-gnueabi [ 253s] checking host system type... armv7l-unknown-linux-gnueabi [ 253s] checking for style of include used by make... GNU [ 253s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 253s] checking for gcc... gcc [ 253s] checking whether the C compiler works... yes [ 253s] checking for C compiler default output file name... a.out [ 254s] checking for suffix of executables... [ 254s] checking whether we are cross compiling... no [ 254s] checking for suffix of object files... o [ 254s] checking whether we are using the GNU C compiler... yes [ 254s] checking whether gcc accepts -g... yes [ 254s] checking for gcc option to accept ISO C89... none needed [ 254s] checking dependency style of gcc... gcc3 [ 254s] checking for a sed that does not truncate output... /bin/sed [ 254s] checking for grep that handles long lines and -e... /bin/grep [ 254s] checking for egrep... /bin/grep -E [ 254s] checking for fgrep... /bin/grep -F [ 254s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 254s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 254s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 254s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 254s] checking whether ln -s works... yes [ 254s] checking the maximum length of command line arguments... 1572864 [ 254s] checking whether the shell understands some XSI constructs... yes [ 254s] checking whether the shell understands "+="... yes [ 254s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 254s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 254s] checking for objdump... objdump [ 254s] checking how to recognize dependent libraries... pass_all [ 254s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 254s] checking for ar... ar [ 254s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 254s] checking for strip... strip [ 254s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 254s] checking for ranlib... ranlib [ 254s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 254s] checking how to run the C preprocessor... gcc -E [ 254s] checking for ANSI C header files... yes [ 254s] checking for sys/types.h... yes [ 254s] checking for sys/stat.h... yes [ 254s] checking for stdlib.h... yes [ 254s] checking for string.h... yes [ 255s] checking for memory.h... yes [ 255s] checking for strings.h... yes [ 255s] checking for inttypes.h... yes [ 255s] checking for stdint.h... yes [ 255s] checking for unistd.h... yes [ 255s] checking for dlfcn.h... yes [ 255s] checking for objdir... .libs [ 255s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 255s] checking for gcc option to produce PIC... -fPIC -DPIC [ 255s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 255s] checking if gcc static flag -static works... no [ 255s] checking if gcc supports -c -o file.o... yes [ 255s] checking if gcc supports -c -o file.o... (cached) yes [ 255s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 255s] checking whether -lc should be explicitly linked in... no [ 255s] checking dynamic linker characteristics... GNU/Linux ld.so [ 255s] checking how to hardcode library paths into programs... immediate [ 255s] checking whether stripping libraries is possible... yes [ 255s] checking if libtool supports shared libraries... yes [ 255s] checking whether to build shared libraries... yes [ 255s] checking whether to build static libraries... no [ 255s] checking for gcc option to accept ISO C99... -std=gnu99 [ 255s] checking whether __clang__ is declared... no [ 255s] checking whether __INTEL_COMPILER is declared... no [ 255s] checking whether __SUNPRO_C is declared... no [ 255s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 255s] checking for pkg-config... /usr/bin/pkg-config [ 255s] checking pkg-config is at least version 0.9.0... yes [ 255s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 255s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 255s] checking if gcc -std=gnu99 supports-Wall... yes [ 255s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 255s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 256s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 256s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 256s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 256s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 256s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 256s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 256s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 256s] checking if gcc -std=gnu99 supports-Wunused... yes [ 256s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 256s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 256s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 256s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 256s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 256s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 256s] checking if gcc -std=gnu99 supports-pedantic... yes [ 256s] checking if gcc -std=gnu99 supports-Werror... yes [ 256s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 257s] checking whether malloc(0) returns NULL... yes [ 257s] checking for XRES... yes [ 257s] configure: creating ./config.status [ 257s] config.status: creating Makefile [ 257s] config.status: creating src/Makefile [ 257s] config.status: creating man/Makefile [ 257s] config.status: creating xres.pc [ 257s] config.status: creating config.h [ 257s] config.status: executing depfiles commands [ 257s] config.status: executing libtool commands [ 257s] + make -j4 [ 257s] make all-recursive [ 257s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 257s] Making all in src [ 257s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 257s] CC XRes.lo [ 257s] CCLD libXRes.la [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 258s] Making all in man [ 258s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] GEN XRes.3 [ 258s] GEN XResQueryExtension.3 [ 258s] GEN XResQueryVersion.3 [ 258s] GEN XResQueryClients.3 [ 258s] GEN XResQueryClientResources.3 [ 258s] GEN XResQueryClientPixmapBytes.3 [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] + exit 0 [ 258s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.oyZml2 [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd libXres-1.0.6 [ 258s] + LANG=C [ 258s] + export LANG [ 258s] + unset DISPLAY [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/license [ 258s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/license/libXres [ 258s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] Making install in src [ 258s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 258s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 258s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib" [ 258s] /bin/sh ../libtool --mode=install /usr/bin/install -c libXRes.la '/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib' [ 258s] libtool: install: /usr/bin/install -c .libs/libXRes.so.1.0.0 /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/libXRes.so.1.0.0 [ 258s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib && { ln -s -f libXRes.so.1.0.0 libXRes.so.1 || { rm -f libXRes.so.1 && ln -s libXRes.so.1.0.0 libXRes.so.1; }; }) [ 258s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib && { ln -s -f libXRes.so.1.0.0 libXRes.so || { rm -f libXRes.so && ln -s libXRes.so.1.0.0 libXRes.so; }; }) [ 258s] libtool: install: /usr/bin/install -c .libs/libXRes.lai /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/libXRes.la [ 258s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 258s] test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/include/X11/extensions" [ 258s] /usr/bin/install -c -m 644 ../include/X11/extensions/XRes.h '/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/include/X11/extensions' [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 258s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/src' [ 258s] Making install in man [ 258s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] make[2]: Nothing to be done for `install-exec-am'. [ 258s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/man/man3" [ 258s] /usr/bin/install -c -m 644 XRes.3 XResQueryExtension.3 XResQueryVersion.3 XResQueryClients.3 XResQueryClientResources.3 XResQueryClientPixmapBytes.3 '/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/man/man3' [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6/man' [ 258s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] make[2]: Nothing to be done for `install-exec-am'. [ 258s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/pkgconfig" [ 258s] /usr/bin/install -c -m 644 xres.pc '/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/pkgconfig' [ 258s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libXres-1.0.6' [ 258s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/libXRes.la [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/info [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/doc [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/doc/libXres [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/gtk-doc [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/man [ 258s] + find /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 258s] + xargs rm -f -- [ 258s] + find /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 258s] + xargs rm -f -- [ 258s] + find /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 258s] + xargs rm -f -- [ 258s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libXres-1.0.6 [ 258s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/lib/libXRes.so.1.0.0 [ 258s] symlinked /usr/lib/debug/usr/lib/libXRes.so.1.0.0.debug to /usr/lib/debug/usr/lib/libXRes.so.1.debug [ 258s] symlinked /usr/lib/debug/usr/lib/libXRes.so.1.0.0.debug to /usr/lib/debug/usr/lib/libXRes.so.debug [ 258s] 14 blocks [ 258s] + /usr/lib/rpm/check-buildroot [ 258s] + /usr/lib/rpm//brp-compress [ 258s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 258s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 258s] + /usr/lib/rpm/brp-python-hardlink [ 258s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] Processing files: libXres-1.0.6-3.1.armv7l [ 258s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.XiyKve [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd libXres-1.0.6 [ 258s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/doc/libXres-1.0.6 [ 258s] + export DOCDIR [ 258s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/doc/libXres-1.0.6 [ 258s] + cp -pr AUTHORS COPYING ChangeLog /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm/usr/share/doc/libXres-1.0.6 [ 258s] + exit 0 [ 258s] Provides: libXRes.so.1 [ 258s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 258s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 258s] Requires(post): /sbin/ldconfig [ 258s] Requires(postun): /sbin/ldconfig [ 258s] Requires: libX11.so.6 libXext.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 258s] Processing files: libXres-devel-1.0.6-3.1.armv7l [ 258s] Provides: libxres-devel pkgconfig(xres) = 1.0.6 [ 258s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 258s] Requires: /usr/bin/pkg-config libXRes.so.1 pkgconfig(x11) pkgconfig(xext) pkgconfig(xproto) [ 258s] Processing files: libXres-debuginfo-1.0.6-3.1.armv7l [ 258s] Processing files: libXres-debugsource-1.0.6-3.1.armv7l [ 258s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] Wrote: /home/abuild/rpmbuild/SRPMS/libXres-1.0.6-3.1.src.rpm [ 258s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXres-1.0.6-3.1.armv7l.rpm [ 258s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXres-devel-1.0.6-3.1.armv7l.rpm [ 258s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXres-debuginfo-1.0.6-3.1.armv7l.rpm [ 258s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libXres-debugsource-1.0.6-3.1.armv7l.rpm [ 258s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QTxo8s [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd libXres-1.0.6 [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libXres-1.0.6-3.1.arm [ 258s] + exit 0 [ 258s] ... checking for files with abuild user/group [ 258s] ... creating baselibs [ 259s] ... saving built statistics [ 259s] /.build/build: line 3144: mount: command not found [ 259s] ERROR: no root disk device found, yet another new device name? [ 259s] ls: cannot access /sys/block/: No such file or directory [ 259s] /.build/build: line 3159: umount: command not found [ 259s] ... saving built packages [ 259s] /home/abuild/rpmbuild/RPMS/armv7l/libXres-1.0.6-3.1.armv7l.rpm [ 259s] /home/abuild/rpmbuild/RPMS/armv7l/libXres-debuginfo-1.0.6-3.1.armv7l.rpm [ 259s] /home/abuild/rpmbuild/RPMS/armv7l/libXres-debugsource-1.0.6-3.1.armv7l.rpm [ 259s] /home/abuild/rpmbuild/RPMS/armv7l/libXres-devel-1.0.6-3.1.armv7l.rpm [ 259s] /home/abuild/rpmbuild/SRPMS/libXres-1.0.6-3.1.src.rpm [ 259s] /home/abuild/rpmbuild/OTHER/_statistics [ 260s] [ 260s] w13 finished "build libXres.spec" at Wed Feb 4 12:35:39 UTC 2015. [ 260s] [ 261s] /.build/build: line 368: 214 Killed background_monitor_process [ 263s] [ 252.234432] SysRq : Power Off [ 263s] [ 252.344382] Power down. [ 263s] build: extracting built packages... [ 263s] libXres-1.0.6-3.1.armv7l.rpm [ 263s] libXres-debuginfo-1.0.6-3.1.armv7l.rpm [ 263s] libXres-debugsource-1.0.6-3.1.armv7l.rpm [ 263s] libXres-devel-1.0.6-3.1.armv7l.rpm [ 263s] libXres-1.0.6-3.1.src.rpm [ 263s] _statistics