[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w24 started "build _service:gbs:libcom-core.spec" at Wed Feb 4 12:38:00 UTC 2015. [ 0s] [ 0s] Building libcom-core for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '9451ef0b0de6dd04381a32ac9185200c' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:libcom-core.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:libcom-core.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:libcom-core.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus -> dbus-libs [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 7s] booting kvm ... [ 7s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 12s] Waiting for device /dev/vda to appear: ok [ 12s] fsck from util-linux 2.21.2 [ 12s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 12s] /dev/vda: clean, 4731/2392064 files, 242480/9568256 blocks [ 12s] fsck succeeded. Mounting root device read-write. [ 12s] Mounting root /dev/vda [ 12s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] switching personality to 8... [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] /.build/build: line 770: mount: command not found [ 14s] swapon on /dev/vdb [ 14s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] logging output to //.build.log... [ 15s] processing specfile /.build-srcdir/_service:gbs:libcom-core.spec ... [ 15s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libcom-core.spec build rpmlint-Factory ... [ 16s] running rpm-x86-arm postinstall script [ 16s] running rpm-libs-x86-arm postinstall script [ 16s] running tizen-accelerator postinstall script [ 16s] running bash-x86-arm postinstall script [ 16s] initializing rpm db... [ 21s] [1/165] installing cross-armv7l-platformfile-0.0.1-3.1 [ 21s] [2/165] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 21s] [3/165] installing libX11-common-1.5.0-3.1 [ 22s] [4/165] installing tizen-release-2.2.0-3.1 [ 22s] [5/165] installing tzdata-2013h-3.1 [ 22s] [6/165] installing libgcc-4.6.4-3.14 [ 22s] [7/165] installing setup-0.1-3.1 [ 22s] [8/165] installing filesystem-0.1-3.1 [ 22s] warning: group lock does not exist - using root [ 22s] [9/165] installing eglibc-2.13-3.9 [ 23s] [10/165] installing libstdc++-4.6.4-3.14 [ 23s] [11/165] installing eglibc-common-2.13-3.9 [ 23s] [12/165] installing libstdc++-devel-4.6.4-3.14 [ 23s] [13/165] installing bash-4.1-3.1 [ 23s] [14/165] installing bzip2-libs-1.0.5-3.2 [ 23s] [15/165] installing capi-base-common-0.1.7-3.1 [ 23s] [16/165] installing cpio-2.8-3.1 [ 23s] [17/165] installing diffutils-3.0-3.1 [ 23s] [18/165] installing e2fsprogs-libs-1.41.9-3.1 [ 24s] [19/165] installing elfutils-libelf-0.152-3.8 [ 24s] [20/165] installing expat-2.0.1-3.2 [ 24s] [21/165] installing fdupes-1.40-3.1 [ 24s] [22/165] installing findutils-4.2.31-3.1 [ 24s] [23/165] installing gdbm-1.8.3-3.3 [ 24s] [24/165] installing libXau-1.0.7-3.1 [ 24s] [25/165] installing libattr-2.4.44-3.4 [ 24s] [26/165] installing libffi-3.0.9-3.1 [ 24s] [27/165] installing libgomp-4.6.4-3.14 [ 24s] [28/165] installing liblua-5.1.4-3.2 [ 25s] [29/165] installing libuuid-2.20.2-3.1 [ 25s] [30/165] installing lzo-2.03-3.3 [ 25s] [31/165] installing m4-1.4.14-3.1 [ 25s] [32/165] installing net-tools-1.60-3.1 [ 25s] [33/165] installing nspr-4.9-3.6 [ 25s] [34/165] installing nss-softokn-freebl-3.12.9-3.11 [ 25s] [35/165] installing openssl-1.0.1k-3.2 [ 25s] [36/165] installing patch-2.6-3.1 [ 25s] [37/165] installing pkg-config-0.25-2.2 [ 25s] [38/165] installing popt-1.16-3.2 [ 26s] [39/165] installing readline-5.2-3.2 [ 26s] [40/165] installing sed-4.1.5-3.1 [ 26s] [41/165] installing smack-1.0+s14-3.2 [ 26s] [42/165] installing sqlite-3.7.13-3.2 [ 26s] [43/165] installing systemd-libs-210-7.1 [ 26s] [44/165] installing tar-1.17-3.2 [ 26s] [45/165] installing xz-libs-5.0.3-3.3 [ 26s] [46/165] installing zlib-1.2.5-3.8 [ 26s] [47/165] installing gmp-4.2.1-3.2 [ 26s] [48/165] installing libpcre-7.7-3.3 [ 26s] [49/165] installing ncurses-libs-5.7-3.2 [ 27s] [50/165] installing build-compare-2009.10.14-3.5 [ 27s] [51/165] installing qemu.x86_64-1.2-5.1 [ 30s] [52/165] installing capi-base-common-devel-0.1.7-3.1 [ 30s] [53/165] installing eglibc-headers-2.13-3.9 [ 30s] [54/165] installing libcap-2.21-3.2 [ 31s] [55/165] installing unzip-6.0-3.4 [ 31s] [56/165] installing zlib-devel-1.2.5-3.8 [ 31s] [57/165] installing grep-2.5.1a-3.1 [ 31s] [58/165] installing libacl-2.2.49-3.2 [ 31s] [59/165] installing libfile-5.04-3.2 [ 31s] [60/165] installing libxcb-1.8.1-3.1 [ 31s] [61/165] installing libxml2-2.7.8-3.2 [ 31s] [62/165] installing lzo-minilzo-2.03-3.3 [ 32s] [63/165] installing make-3.82-3.2 [ 32s] [64/165] installing mpfr-3.0.0-3.2 [ 32s] [65/165] installing ncurses-5.7-3.2 [ 32s] [66/165] installing bzip2-1.0.5-3.2 [ 32s] [67/165] installing gettext-runtime-0.18.1.1-3.2 [ 32s] [68/165] installing glib2-2.32.3-3.1 [ 33s] [69/165] installing kmod-libs-15-3.1 [ 33s] [70/165] installing libblkid-2.20.2-3.1 [ 33s] [71/165] installing smack-utils-1.0+s14-3.2 [ 33s] [72/165] installing xz-5.0.3-3.3 [ 35s] [73/165] installing binutils-2.22-3.4 [ 35s] [74/165] installing elfutils-libs-0.152-3.8 [ 35s] [75/165] installing nss-3.12.9-3.11 [ 36s] [76/165] installing perl-5.12.1-3.3 [ 48s] [77/165] installing ncurses-base-5.7-3.2 [ 48s] [78/165] installing perl-HTML-Tagset-3.20-3.1 [ 48s] [79/165] installing perl-IO-Compress-Base-2.008-3.3 [ 49s] [80/165] installing perl-Module-Pluggable-3.60-3.3 [ 49s] [81/165] installing perl-Pod-Escapes-1.04-3.3 [ 49s] [82/165] installing perl-TimeDate-1.20-3.1 [ 49s] [83/165] installing eglibc-devel-2.13-3.9 [ 49s] [84/165] installing file-5.04-3.2 [ 49s] [85/165] installing lzo-devel-2.03-3.3 [ 50s] [86/165] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 50s] [87/165] installing perl-devel-5.12.1-3.3 [ 50s] [88/165] installing perl-libs-5.12.1-3.3 [ 51s] [89/165] installing coreutils-6.9-3.3 [ 51s] [90/165] installing gettext-tools-0.18.1.1-3.2 [ 52s] [91/165] installing libX11-1.5.0-3.1 [ 52s] [92/165] installing libdlog-0.4.1-3.1 [ 52s] [93/165] installing libmount-2.20.2-3.1 [ 52s] [94/165] installing mpc-0.9-3.2 [ 53s] [95/165] installing xz-lzma-compat-5.0.3-3.3 [ 53s] [96/165] installing elfutils-0.152-3.8 [ 53s] [97/165] installing nss-sysinit-3.12.9-3.11 [ 53s] [98/165] installing libarchive-2.8.3-3.1 [ 54s] [99/165] installing rpm-libs-4.9.1-4.1 [ 54s] [100/165] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 54s] [101/165] installing perl-Pod-Simple-3.07-3.3 [ 54s] [102/165] installing perl-Test-Simple-0.80-3.3 [ 54s] [103/165] installing tizen-accelerator-1.0.1-3.1 [ 55s] [104/165] installing libdlog-devel-0.4.1-3.1 [ 55s] [105/165] installing perl-IO-Compress-Zlib-2.008-3.3 [ 55s] [106/165] installing perl-Test-Harness-3.12-3.3 [ 56s] [107/165] installing gawk-3.1.5-3.2 [ 56s] [108/165] installing gzip-1.3.12-3.1 [ 56s] [109/165] installing build-2011.01.10a-3.1 [ 57s] [110/165] installing rpm-4.9.1-4.1 [ 57s] [111/165] installing cpp-4.6.4-3.14 [ 59s] [112/165] installing dbus-1.6.4-3.1 [ 60s] [113/165] installing util-linux-2.20.2-3.1 [ 61s] [114/165] installing cmake-2.8.5-3.1 [ 62s] [115/165] installing glib2-devel-2.32.3-3.1 [ 63s] [116/165] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 63s] [117/165] installing dbus-libs-1.6.4-3.1 [ 64s] [118/165] installing eglibc-x86-arm-2.13-2.3 [ 66s] [119/165] installing elfutils-libelf-x86-arm-0.152-2.1 [ 68s] [120/165] installing elfutils-libs-x86-arm-0.152-2.3 [ 69s] [121/165] installing gmp-x86-arm-4.2.1-2.1 [ 69s] [122/165] installing libacl-x86-arm-2.2.49-2.1 [ 70s] [123/165] installing libattr-x86-arm-2.4.44-2.1 [ 70s] [124/165] installing libcap-x86-arm-2.21-2.1 [ 70s] [125/165] installing libfile-x86-arm-5.04-2.2 [ 71s] [126/165] installing libgcc-x86-arm-4.6.4-2.1 [ 71s] [127/165] installing liblua-x86-arm-5.1.4-2.1 [ 71s] [128/165] installing mpc-x86-arm-0.9-2.1 [ 72s] [129/165] installing mpfr-x86-arm-3.0.0-2.1 [ 72s] [130/165] installing ncurses-libs-x86-arm-5.7-2.2 [ 72s] [131/165] installing nspr-x86-arm-4.9-2.3 [ 72s] [132/165] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 73s] [133/165] installing nss-x86-arm-3.12.9-2.3 [ 74s] [134/165] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 74s] [135/165] installing popt-x86-arm-1.16-2.1 [ 74s] [136/165] installing rpm-libs-x86-arm-4.9.1-2.2 [ 75s] [137/165] installing sqlite-x86-arm-3.7.13-2.1 [ 75s] [138/165] installing xz-libs-x86-arm-5.0.3-2.1 [ 76s] [139/165] installing zlib-x86-arm-1.2.5-2.1 [ 76s] [140/165] installing systemd-210-7.1 [ 77s] [141/165] installing gcc-4.6.4-3.14 [ 78s] [142/165] installing rpm-build-4.9.1-4.1 [ 78s] [143/165] installing systemd-devel-210-7.1 [ 78s] [144/165] installing perl-CPAN-1.9205-3.3 [ 79s] [145/165] installing bash-x86-arm-4.1-2.1 [ 79s] [146/165] installing fdupes-x86-arm-1.40-2.1 [ 80s] [147/165] installing findutils-x86-arm-4.2.31-2.1 [ 80s] [148/165] installing gawk-x86-arm-3.1.5-2.2 [ 80s] [149/165] installing gzip-x86-arm-1.3.12-2.1 [ 81s] [150/165] installing make-x86-arm-3.82-2.1 [ 83s] [151/165] installing sed-x86-arm-4.1.5-2.1 [ 83s] [152/165] installing tar-x86-arm-1.17-2.2 [ 84s] [153/165] installing diffutils-x86-arm-3.0-2.1 [ 85s] [154/165] installing patch-x86-arm-2.6-2.1 [ 85s] [155/165] installing autoconf-2.68-3.1 [ 87s] [156/165] installing coreutils-x86-arm-6.9-2.1 [ 90s] [157/165] installing file-x86-arm-5.04-2.1 [ 91s] [158/165] installing elfutils-x86-arm-0.152-2.3 [ 92s] [159/165] installing gcc-c++-4.6.4-3.14 [ 93s] [160/165] installing rpm-x86-arm-4.9.1-2.2 [ 95s] /bin/rpm.orig-arm already present - skipping. [ 95s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 95s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 95s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 95s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 95s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 95s] [161/165] installing rpm-build-x86-arm-4.9.1-2.2 [ 96s] [162/165] installing automake-1.11.1-3.1 [ 96s] [163/165] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 100s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 100s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 100s] [164/165] installing libtool-2.2.6b-3.2 [ 100s] [165/165] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 101s] removing nis flags from //etc/nsswitch.conf... [ 101s] now finalizing build dir... [ 101s] /.build/build: line 2585: mount: command not found [ 101s] /.build/build: line 2586: mount: command not found [ 106s] build target is armv7l-tizen-linux [ 106s] ----------------------------------------------------------------- [ 106s] I have the following modifications for libcom-core.spec: [ 106s] 5c5 [ 106s] < Release: 1 [ 106s] --- [ 106s] > Release: 3.1 [ 106s] 71a72 [ 106s] > %changelog [ 106s] ----------------------------------------------------------------- [ 106s] ----- building libcom-core.spec (user abuild) [ 106s] ----------------------------------------------------------------- [ 106s] ----------------------------------------------------------------- [ 106s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/9451ef0b0de6dd04381a32ac9185200c-libcom-core' /home/abuild/rpmbuild/SOURCES/libcom-core.spec [ 106s] Building target platforms: armv7l-tizen-linux [ 106s] Building for target armv7l-tizen-linux [ 106s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.R6UrgS [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + LANG=C [ 106s] + export LANG [ 106s] + unset DISPLAY [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + rm -rf libcom-core-0.7.0 [ 106s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libcom-core-0.7.0.tar.gz [ 106s] + /bin/tar -xf - [ 106s] + STATUS=0 [ 106s] + '[' 0 -ne 0 ']' [ 106s] + cd libcom-core-0.7.0 [ 106s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 106s] + cp /home/abuild/rpmbuild/SOURCES/libcom-core.manifest . [ 106s] + exit 0 [ 106s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9iYrbV [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd libcom-core-0.7.0 [ 106s] + LANG=C [ 106s] + export LANG [ 106s] + unset DISPLAY [ 106s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 106s] + export CFLAGS [ 106s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 106s] + export CXXFLAGS [ 106s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 106s] + export FFLAGS [ 106s] + LD_AS_NEEDED=1 [ 106s] + export LD_AS_NEEDED [ 106s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 106s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 106s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 106s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE' [ 106s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE' [ 106s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE' [ 106s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + export CFLAGS [ 106s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + export CXXFLAGS [ 106s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE' [ 106s] + export FFLAGS [ 106s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . [ 106s] -- The C compiler identification is GNU [ 106s] -- Check for working C compiler: /usr/bin/gcc [ 107s] -- Check for working C compiler: /usr/bin/gcc -- works [ 107s] -- Detecting C compiler ABI info [ 107s] -- Detecting C compiler ABI info - done [ 107s] -- checking for modules 'glib-2.0;dlog;libsystemd-daemon' [ 108s] -- found glib-2.0, version 2.32.3 [ 108s] -- found dlog, version 1.0 [ 108s] -- found libsystemd-daemon, version 210 [ 108s] -- Configuring done [ 108s] -- Generating done [ 108s] CMake Warning: [ 108s] Manually-specified variables were not used by the project: [ 108s] [ 108s] CMAKE_INSTALL_LIBDIR [ 108s] INCLUDE_INSTALL_DIR [ 108s] SHARE_INSTALL_PREFIX [ 108s] SYSCONF_INSTALL_DIR [ 108s] [ 108s] [ 108s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 [ 108s] + make -j4 [ 108s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 -B/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 109s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles/progress.marks [ 109s] make -f CMakeFiles/Makefile2 all [ 109s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 109s] make -f CMakeFiles/com-core.dir/build.make CMakeFiles/com-core.dir/depend [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 109s] cd /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles/com-core.dir/DependInfo.cmake --color= [ 109s] Scanning dependencies of target com-core [ 109s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 109s] make -f CMakeFiles/com-core.dir/build.make CMakeFiles/com-core.dir/build [ 109s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 109s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 1 [ 109s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 2 [ 109s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 3 [ 109s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 4 [ 109s] [ 50%] [ 50%] [ 50%] [ 50%] Building C object CMakeFiles/com-core.dir/src/util.c.o [ 109s] Building C object CMakeFiles/com-core.dir/src/packet.c.o [ 109s] Building C object CMakeFiles/com-core.dir/src/com-core.c.o [ 109s] Building C object CMakeFiles/com-core.dir/src/dlist.c.o [ 109s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/util.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/util.c [ 109s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/packet.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/packet.c [ 109s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/com-core.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/com-core.c [ 109s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/dlist.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/dlist.c [ 110s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 5 [ 110s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 6 [ 110s] [ 62%] [ 75%] Building C object CMakeFiles/com-core.dir/src/com-core_packet.c.o [ 110s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/com-core_packet.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/com-core_packet.c [ 110s] Building C object CMakeFiles/com-core.dir/src/secure_socket.c.o [ 110s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/secure_socket.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/secure_socket.c [ 110s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 7 [ 110s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 8 [ 110s] [ 87%] [100%] Building C object CMakeFiles/com-core.dir/src/com-core_thread.c.o [ 110s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/com-core_thread.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/com-core_thread.c [ 110s] Building C object CMakeFiles/com-core.dir/src/com-core_packet-router.c.o [ 110s] /usr/bin/gcc -Dcom_core_EXPORTS -DPREFIX=\"/usr\" -DLOG_TAG=\"COM_CORE\" -DNDEBUG -D_USE_ECORE_TIME_GET -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -fPIC -I/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/include -o CMakeFiles/com-core.dir/src/com-core_packet-router.c.o -c /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/src/com-core_packet-router.c [ 111s] Linking C shared library libcom-core.so [ 111s] /usr/bin/cmake -E cmake_link_script CMakeFiles/com-core.dir/link.txt --verbose=1 [ 111s] /usr/bin/gcc -fPIC -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_DEBUG_ENABLE -DTIZEN_ENGINEER_MODE -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dlog -fvisibility=hidden -g -Wall -Werror -Winline -shared -Wl,-soname,libcom-core.so.0 -o libcom-core.so.0.0.1 CMakeFiles/com-core.dir/src/dlist.c.o CMakeFiles/com-core.dir/src/com-core.c.o CMakeFiles/com-core.dir/src/util.c.o CMakeFiles/com-core.dir/src/packet.c.o CMakeFiles/com-core.dir/src/com-core_packet.c.o CMakeFiles/com-core.dir/src/secure_socket.c.o CMakeFiles/com-core.dir/src/com-core_thread.c.o CMakeFiles/com-core.dir/src/com-core_packet-router.c.o -lglib-2.0 -ldlog -lpthread -lcapi-base-common -lsystemd [ 111s] /usr/bin/cmake -E cmake_symlink_library libcom-core.so.0.0.1 libcom-core.so.0 libcom-core.so [ 111s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 1 2 3 4 5 6 7 8 [ 111s] [100%] Built target com-core [ 111s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 0 [ 111s] + exit 0 [ 111s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.nXYLqg [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd libcom-core-0.7.0 [ 111s] + LANG=C [ 111s] + export LANG [ 111s] + unset DISPLAY [ 111s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 111s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 111s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 111s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm install [ 111s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 -B/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 --check-build-system CMakeFiles/Makefile.cmake 0 [ 111s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles/progress.marks [ 111s] /usr/bin/make -f CMakeFiles/Makefile2 all [ 111s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/make -f CMakeFiles/com-core.dir/build.make CMakeFiles/com-core.dir/depend [ 111s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] cd /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles/com-core.dir/DependInfo.cmake --color= [ 111s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/make -f CMakeFiles/com-core.dir/build.make CMakeFiles/com-core.dir/build [ 111s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] make[2]: Nothing to be done for `CMakeFiles/com-core.dir/build'. [ 111s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 1 2 3 4 5 6 7 8 [ 111s] [100%] Built target com-core [ 111s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0/CMakeFiles 0 [ 111s] /usr/bin/make -f CMakeFiles/Makefile2 preinstall [ 111s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] make[1]: Nothing to be done for `preinstall'. [ 111s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libcom-core-0.7.0' [ 111s] Install the project... [ 111s] /usr/bin/cmake -P cmake_install.cmake [ 111s] -- Install configuration: "" [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/lib/libcom-core.so.0.0.1 [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/lib/libcom-core.so.0 [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/lib/libcom-core.so [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/lib/pkgconfig/com-core.pc [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/include/com-core/secure_socket.h [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/include/com-core/com-core.h [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/include/com-core/com-core_packet.h [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/include/com-core/com-core_thread.h [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/include/com-core/packet.h [ 111s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/share/license/libcom-core [ 111s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/share/info/dir [ 111s] + xargs rm -f -- [ 111s] + find /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm -regex '.*\.la$' [ 111s] + find /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm -regex '.*\.a$' [ 111s] + xargs rm -f -- [ 112s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm//usr/share/license [ 112s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libcom-core-0.7.0 [ 112s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm/usr/lib/libcom-core.so.0.0.1 [ 112s] symlinked /usr/lib/debug/usr/lib/libcom-core.so.0.0.1.debug to /usr/lib/debug/usr/lib/libcom-core.so.debug [ 112s] symlinked /usr/lib/debug/usr/lib/libcom-core.so.0.0.1.debug to /usr/lib/debug/usr/lib/libcom-core.so.0.debug [ 112s] 297 blocks [ 112s] + /usr/lib/rpm/check-buildroot [ 112s] + /usr/lib/rpm//brp-compress [ 112s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 112s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 112s] + /usr/lib/rpm/brp-python-hardlink [ 112s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 112s] Processing files: libcom-core-0.7.0-3.1.armv7l [ 112s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 112s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 112s] [ 112s] Provides: libcom-core.so.0 [ 112s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Requires(post): /sbin/ldconfig [ 112s] Requires(postun): /sbin/ldconfig [ 112s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.9) libcom-core.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libsystemd.so.0 libsystemd.so.0(LIBSYSTEMD_209) [ 112s] Processing files: libcom-core-devel-0.7.0-3.1.armv7l [ 112s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 112s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 112s] [ 112s] Provides: pkgconfig(com-core) = 0.0.1 [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Requires: /usr/bin/pkg-config [ 112s] Processing files: libcom-core-debuginfo-0.7.0-3.1.armv7l [ 112s] Processing files: libcom-core-debugsource-0.7.0-3.1.armv7l [ 112s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 112s] Wrote: /home/abuild/rpmbuild/SRPMS/libcom-core-0.7.0-3.1.src.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-0.7.0-3.1.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-devel-0.7.0-3.1.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-debuginfo-0.7.0-3.1.armv7l.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-debugsource-0.7.0-3.1.armv7l.rpm [ 112s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.h6B65I [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd libcom-core-0.7.0 [ 112s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libcom-core-0.7.0-3.1.arm [ 112s] + exit 0 [ 112s] ... checking for files with abuild user/group [ 112s] ... creating baselibs [ 113s] ... saving built statistics [ 113s] /.build/build: line 3144: mount: command not found [ 113s] ERROR: no root disk device found, yet another new device name? [ 113s] ls: cannot access /sys/block/: No such file or directory [ 113s] /.build/build: line 3159: umount: command not found [ 113s] ... saving built packages [ 113s] /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-0.7.0-3.1.armv7l.rpm [ 113s] /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-debuginfo-0.7.0-3.1.armv7l.rpm [ 113s] /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-debugsource-0.7.0-3.1.armv7l.rpm [ 113s] /home/abuild/rpmbuild/RPMS/armv7l/libcom-core-devel-0.7.0-3.1.armv7l.rpm [ 113s] /home/abuild/rpmbuild/SRPMS/libcom-core-0.7.0-3.1.src.rpm [ 113s] /home/abuild/rpmbuild/OTHER/_statistics [ 113s] [ 113s] w24 finished "build libcom-core.spec" at Wed Feb 4 12:39:52 UTC 2015. [ 113s] [ 115s] /.build/build: line 368: 222 Killed background_monitor_process [ 117s] [ 108.114477] SysRq : Power Off [ 117s] [ 108.328332] Power down. [ 117s] build: extracting built packages... [ 117s] libcom-core-0.7.0-3.1.armv7l.rpm [ 117s] libcom-core-debuginfo-0.7.0-3.1.armv7l.rpm [ 117s] libcom-core-debugsource-0.7.0-3.1.armv7l.rpm [ 117s] libcom-core-devel-0.7.0-3.1.armv7l.rpm [ 117s] libcom-core-0.7.0-3.1.src.rpm [ 117s] _statistics Retried build at Thu Feb 5 21:10:11 2015 returned same result, skipped