[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:libcryptsvc.spec" at Wed Feb 4 12:39:32 UTC 2015. [ 0s] [ 0s] Building libcryptsvc for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'a8b64353cceeba095e2276ae20498bff' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:libcryptsvc.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:libcryptsvc.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:libcryptsvc.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 10s] booting kvm ... [ 10s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 6 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 31s] Waiting for device /dev/vda to appear: ok [ 31s] fsck from util-linux 2.21.2 [ 31s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 31s] /dev/vda: clean, 4700/2392064 files, 239370/9568256 blocks [ 31s] fsck succeeded. Mounting root device read-write. [ 31s] Mounting root /dev/vda [ 31s] mount -o rw -t ext4 /dev/vda /root [ 42s] replacing /etc/mtab with symlink to /proc/self/mounts [ 44s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 59s] 2nd stage started in virtual machine [ 59s] machine type: armv7l [ 59s] switching personality to 8... [ 59s] 2nd stage started in virtual machine [ 59s] machine type: armv7l [ 59s] /.build/build: line 770: mount: command not found [ 60s] swapon on /dev/vdb [ 60s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 60s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 62s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 64s] logging output to //.build.log... [ 65s] processing specfile /.build-srcdir/_service:gbs:libcryptsvc.spec ... [ 66s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libcryptsvc.spec build rpmlint-Factory ... [ 97s] running rpm-x86-arm postinstall script [ 101s] running rpm-libs-x86-arm postinstall script [ 102s] running tizen-accelerator postinstall script [ 103s] running bash-x86-arm postinstall script [ 104s] initializing rpm db... [ 113s] [1/151] installing cross-armv7l-platformfile-0.0.1-3.1 [ 119s] [2/151] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 121s] [3/151] installing tizen-release-2.2.0-3.1 [ 122s] [4/151] installing tzdata-2013h-3.1 [ 130s] [5/151] installing libgcc-4.6.4-3.14 [ 131s] [6/151] installing setup-0.1-3.1 [ 133s] [7/151] installing filesystem-0.1-3.1 [ 136s] warning: group lock does not exist - using root [ 136s] [8/151] installing eglibc-2.13-3.9 [ 138s] [9/151] installing libstdc++-4.6.4-3.14 [ 139s] [10/151] installing eglibc-common-2.13-3.9 [ 147s] [11/151] installing libstdc++-devel-4.6.4-3.14 [ 148s] [12/151] installing bash-4.1-3.1 [ 149s] [13/151] installing bzip2-libs-1.0.5-3.2 [ 150s] [14/151] installing capi-base-common-0.1.7-3.1 [ 150s] [15/151] installing cpio-2.8-3.1 [ 151s] [16/151] installing diffutils-3.0-3.1 [ 152s] [17/151] installing e2fsprogs-libs-1.41.9-3.1 [ 153s] [18/151] installing elfutils-libelf-0.152-3.8 [ 155s] [19/151] installing expat-2.0.1-3.2 [ 156s] [20/151] installing fdupes-1.40-3.1 [ 157s] [21/151] installing findutils-4.2.31-3.1 [ 170s] [22/151] installing gdbm-1.8.3-3.3 [ 171s] [23/151] installing libattr-2.4.44-3.4 [ 175s] [24/151] installing libgomp-4.6.4-3.14 [ 177s] [25/151] installing liblua-5.1.4-3.2 [ 177s] [26/151] installing libuuid-2.20.2-3.1 [ 177s] [27/151] installing lzo-2.03-3.3 [ 180s] [28/151] installing m4-1.4.14-3.1 [ 181s] [29/151] installing net-tools-1.60-3.1 [ 182s] [30/151] installing nspr-4.9-3.6 [ 183s] [31/151] installing nss-softokn-freebl-3.12.9-3.11 [ 183s] [32/151] installing openssl-1.0.1k-3.2 [ 190s] [33/151] installing patch-2.6-3.1 [ 190s] [34/151] installing pkg-config-0.25-2.2 [ 191s] [35/151] installing popt-1.16-3.2 [ 192s] [36/151] installing readline-5.2-3.2 [ 193s] [37/151] installing sed-4.1.5-3.1 [ 194s] [38/151] installing smack-1.0+s14-3.2 [ 194s] [39/151] installing sqlite-3.7.13-3.2 [ 195s] [40/151] installing tar-1.17-3.2 [ 196s] [41/151] installing xz-libs-5.0.3-3.3 [ 197s] [42/151] installing zlib-1.2.5-3.8 [ 197s] [43/151] installing gmp-4.2.1-3.2 [ 197s] [44/151] installing libpcre-7.7-3.3 [ 198s] [45/151] installing ncurses-libs-5.7-3.2 [ 198s] [46/151] installing build-compare-2009.10.14-3.5 [ 198s] [47/151] installing qemu.x86_64-1.2-5.1 [ 202s] [48/151] installing capi-base-common-devel-0.1.7-3.1 [ 202s] [49/151] installing eglibc-headers-2.13-3.9 [ 205s] [50/151] installing libcap-2.21-3.2 [ 205s] [51/151] installing openssl-devel-1.0.1k-3.2 [ 206s] [52/151] installing unzip-6.0-3.4 [ 207s] [53/151] installing zlib-devel-1.2.5-3.8 [ 207s] [54/151] installing grep-2.5.1a-3.1 [ 208s] [55/151] installing libacl-2.2.49-3.2 [ 211s] [56/151] installing libfile-5.04-3.2 [ 214s] [57/151] installing libxml2-2.7.8-3.2 [ 215s] [58/151] installing lzo-minilzo-2.03-3.3 [ 215s] [59/151] installing make-3.82-3.2 [ 215s] [60/151] installing mpfr-3.0.0-3.2 [ 217s] [61/151] installing ncurses-5.7-3.2 [ 218s] [62/151] installing bzip2-1.0.5-3.2 [ 218s] [63/151] installing libblkid-2.20.2-3.1 [ 219s] [64/151] installing smack-utils-1.0+s14-3.2 [ 220s] [65/151] installing xz-5.0.3-3.3 [ 221s] [66/151] installing binutils-2.22-3.4 [ 223s] [67/151] installing elfutils-libs-0.152-3.8 [ 225s] [68/151] installing nss-3.12.9-3.11 [ 228s] [69/151] installing perl-5.12.1-3.3 [ 234s] [70/151] installing ncurses-base-5.7-3.2 [ 235s] [71/151] installing perl-HTML-Tagset-3.20-3.1 [ 235s] [72/151] installing perl-IO-Compress-Base-2.008-3.3 [ 235s] [73/151] installing perl-Module-Pluggable-3.60-3.3 [ 235s] [74/151] installing perl-Pod-Escapes-1.04-3.3 [ 235s] [75/151] installing perl-TimeDate-1.20-3.1 [ 235s] [76/151] installing eglibc-devel-2.13-3.9 [ 235s] [77/151] installing file-5.04-3.2 [ 235s] [78/151] installing lzo-devel-2.03-3.3 [ 236s] [79/151] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 236s] [80/151] installing perl-devel-5.12.1-3.3 [ 236s] [81/151] installing perl-libs-5.12.1-3.3 [ 236s] [82/151] installing coreutils-6.9-3.3 [ 237s] [83/151] installing libdlog-0.4.1-3.1 [ 237s] [84/151] installing libmount-2.20.2-3.1 [ 238s] [85/151] installing mpc-0.9-3.2 [ 238s] [86/151] installing xz-lzma-compat-5.0.3-3.3 [ 238s] [87/151] installing elfutils-0.152-3.8 [ 238s] [88/151] installing nss-sysinit-3.12.9-3.11 [ 240s] [89/151] installing libarchive-2.8.3-3.1 [ 240s] [90/151] installing rpm-libs-4.9.1-4.1 [ 241s] [91/151] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 241s] [92/151] installing perl-Pod-Simple-3.07-3.3 [ 242s] [93/151] installing perl-Test-Simple-0.80-3.3 [ 242s] [94/151] installing tizen-accelerator-1.0.1-3.1 [ 242s] [95/151] installing libdlog-devel-0.4.1-3.1 [ 242s] [96/151] installing perl-IO-Compress-Zlib-2.008-3.3 [ 243s] [97/151] installing perl-Test-Harness-3.12-3.3 [ 243s] [98/151] installing gawk-3.1.5-3.2 [ 243s] [99/151] installing gzip-1.3.12-3.1 [ 243s] [100/151] installing build-2011.01.10a-3.1 [ 244s] [101/151] installing rpm-4.9.1-4.1 [ 244s] [102/151] installing cpp-4.6.4-3.14 [ 245s] [103/151] installing util-linux-2.20.2-3.1 [ 246s] [104/151] installing cmake-2.8.5-3.1 [ 248s] [105/151] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 249s] [106/151] installing eglibc-x86-arm-2.13-2.3 [ 251s] [107/151] installing elfutils-libelf-x86-arm-0.152-2.1 [ 251s] [108/151] installing elfutils-libs-x86-arm-0.152-2.3 [ 252s] [109/151] installing gmp-x86-arm-4.2.1-2.1 [ 254s] [110/151] installing libacl-x86-arm-2.2.49-2.1 [ 255s] [111/151] installing libattr-x86-arm-2.4.44-2.1 [ 255s] [112/151] installing libcap-x86-arm-2.21-2.1 [ 256s] [113/151] installing libfile-x86-arm-5.04-2.2 [ 256s] [114/151] installing libgcc-x86-arm-4.6.4-2.1 [ 256s] [115/151] installing liblua-x86-arm-5.1.4-2.1 [ 257s] [116/151] installing mpc-x86-arm-0.9-2.1 [ 257s] [117/151] installing mpfr-x86-arm-3.0.0-2.1 [ 257s] [118/151] installing ncurses-libs-x86-arm-5.7-2.2 [ 257s] [119/151] installing nspr-x86-arm-4.9-2.3 [ 257s] [120/151] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 258s] [121/151] installing nss-x86-arm-3.12.9-2.3 [ 258s] [122/151] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 259s] [123/151] installing popt-x86-arm-1.16-2.1 [ 260s] [124/151] installing rpm-libs-x86-arm-4.9.1-2.2 [ 261s] [125/151] installing sqlite-x86-arm-3.7.13-2.1 [ 261s] [126/151] installing xz-libs-x86-arm-5.0.3-2.1 [ 261s] [127/151] installing zlib-x86-arm-1.2.5-2.1 [ 262s] [128/151] installing gcc-4.6.4-3.14 [ 263s] [129/151] installing rpm-build-4.9.1-4.1 [ 263s] [130/151] installing perl-CPAN-1.9205-3.3 [ 267s] [131/151] installing bash-x86-arm-4.1-2.1 [ 270s] [132/151] installing fdupes-x86-arm-1.40-2.1 [ 270s] [133/151] installing findutils-x86-arm-4.2.31-2.1 [ 271s] [134/151] installing gawk-x86-arm-3.1.5-2.2 [ 271s] [135/151] installing gzip-x86-arm-1.3.12-2.1 [ 273s] [136/151] installing make-x86-arm-3.82-2.1 [ 276s] [137/151] installing sed-x86-arm-4.1.5-2.1 [ 277s] [138/151] installing tar-x86-arm-1.17-2.2 [ 277s] [139/151] installing diffutils-x86-arm-3.0-2.1 [ 278s] [140/151] installing patch-x86-arm-2.6-2.1 [ 278s] [141/151] installing autoconf-2.68-3.1 [ 279s] [142/151] installing coreutils-x86-arm-6.9-2.1 [ 282s] [143/151] installing file-x86-arm-5.04-2.1 [ 282s] [144/151] installing elfutils-x86-arm-0.152-2.3 [ 283s] [145/151] installing gcc-c++-4.6.4-3.14 [ 283s] [146/151] installing rpm-x86-arm-4.9.1-2.2 [ 283s] /bin/rpm.orig-arm already present - skipping. [ 283s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 283s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 283s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 283s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 283s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 283s] [147/151] installing rpm-build-x86-arm-4.9.1-2.2 [ 284s] [148/151] installing automake-1.11.1-3.1 [ 284s] [149/151] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 287s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 287s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 288s] [150/151] installing libtool-2.2.6b-3.2 [ 288s] [151/151] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 290s] removing nis flags from //etc/nsswitch.conf... [ 290s] now finalizing build dir... [ 290s] /.build/build: line 2585: mount: command not found [ 290s] /.build/build: line 2586: mount: command not found [ 308s] build target is armv7l-tizen-linux [ 308s] ----------------------------------------------------------------- [ 308s] I have the following modifications for libcryptsvc.spec: [ 308s] 5c5 [ 308s] < Release: 6 [ 308s] --- [ 308s] > Release: 3.1 [ 308s] ----------------------------------------------------------------- [ 308s] ----- building libcryptsvc.spec (user abuild) [ 308s] ----------------------------------------------------------------- [ 308s] ----------------------------------------------------------------- [ 308s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/a8b64353cceeba095e2276ae20498bff-libcryptsvc' /home/abuild/rpmbuild/SOURCES/libcryptsvc.spec [ 308s] Building target platforms: armv7l-tizen-linux [ 308s] Building for target armv7l-tizen-linux [ 308s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6HzkW0 [ 308s] + umask 022 [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + LANG=C [ 308s] + export LANG [ 308s] + unset DISPLAY [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + rm -rf libcryptsvc-0.0.1 [ 308s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libcryptsvc-0.0.1.tar.gz [ 308s] + /bin/tar -xf - [ 308s] + STATUS=0 [ 308s] + '[' 0 -ne 0 ']' [ 308s] + cd libcryptsvc-0.0.1 [ 308s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 308s] + exit 0 [ 308s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.knP577 [ 308s] + umask 022 [ 308s] + cd /home/abuild/rpmbuild/BUILD [ 308s] + cd libcryptsvc-0.0.1 [ 308s] + LANG=C [ 308s] + export LANG [ 308s] + unset DISPLAY [ 308s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 308s] + export CFLAGS [ 308s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 308s] + export CXXFLAGS [ 308s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 308s] + export FFLAGS [ 308s] + LD_AS_NEEDED=1 [ 308s] + export LD_AS_NEEDED [ 308s] + export 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 308s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 308s] + export 'CXXFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 308s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DTIZEN_ENGINEER_MODE' [ 308s] + export 'FFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 308s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir -DTIZEN_ENGINEER_MODE' [ 308s] ++ echo 0.0.1 [ 308s] ++ awk 'BEGIN {FS="."}{print $1}' [ 308s] + MAJORVER=0 [ 308s] + cmake . -DCMAKE_INSTALL_PREFIX=/usr -DARCH=arm -DFULLVER=0.0.1 -DMAJORVER=0 -DDESCRIPTION=nothing [ 309s] -- The C compiler identification is GNU [ 309s] -- Check for working C compiler: /usr/bin/gcc [ 309s] -- Check for working C compiler: /usr/bin/gcc -- works [ 309s] -- Detecting C compiler ABI info [ 310s] -- Detecting C compiler ABI info - done [ 310s] -- checking for module ' openssl dlog libcrypto ' [ 310s] -- found openssl dlog libcrypto , version 1.0.1k;1.0;1.0.1k [ 311s] -- checking for modules 'dlog;openssl' [ 311s] -- found dlog, version 1.0 [ 311s] -- found openssl, version 1.0.1k [ 311s] -- Configuring done [ 311s] -- Generating done [ 311s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1 [ 311s] + make -j6 [ 312s] Scanning dependencies of target cryptsvc [ 312s] Scanning dependencies of target duid-gadget [ 312s] [ 33%] [100%] [100%] Building C object CMakeFiles/cryptsvc.dir/srcs/SecCryptoSvc.c.o [ 312s] Building C object gadget/CMakeFiles/duid-gadget.dir/duid-gadget.c.o [ 312s] Building C object gadget/CMakeFiles/duid-gadget.dir/__/srcs/SecCryptoSvc.c.o [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c: In function 'main': [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:49:2: warning: pointer targets in passing argument 2 of 'SecFrameGeneratePlatformUniqueKey' differ in signedness [-Wpointer-sign] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/include/SecCryptoSvc.h:119:6: note: expected 'unsigned char *' but argument is of type 'char *' [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:62:2: warning: implicit declaration of function 'strlen' [-Wimplicit-function-declaration] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:62:30: warning: incompatible implicit declaration of built-in function 'strlen' [enabled by default] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:63:2: warning: implicit declaration of function 'strncpy' [-Wimplicit-function-declaration] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:63:2: warning: incompatible implicit declaration of built-in function 'strncpy' [enabled by default] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:64:2: warning: implicit declaration of function 'strncat' [-Wimplicit-function-declaration] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:64:2: warning: incompatible implicit declaration of built-in function 'strncat' [enabled by default] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/gadget/duid-gadget.c:31:7: warning: unused variable 'result' [-Wunused-variable] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c: In function 'SysSecBootGetDeviceUniqueKey': [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:118:3: warning: null argument where non-null required (argument 2) [-Wnonnull] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:118:3: warning: null argument where non-null required (argument 2) [-Wnonnull] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c: In function 'GetDuid': [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:237:2: warning: pointer targets in passing argument 2 of 'SecFrameGeneratePlatformUniqueKey' differ in signedness [-Wpointer-sign] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:122:6: note: expected 'unsigned char *' but argument is of type 'char *' [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c: In function 'SysSecBootGetDeviceUniqueKey': [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:118:3: warning: null argument where non-null required (argument 2) [-Wnonnull] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:118:3: warning: null argument where non-null required (argument 2) [-Wnonnull] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c: In function 'GetDuid': [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:237:2: warning: pointer targets in passing argument 2 of 'SecFrameGeneratePlatformUniqueKey' differ in signedness [-Wpointer-sign] [ 312s] /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1/srcs/SecCryptoSvc.c:122:6: note: expected 'unsigned char *' but argument is of type 'char *' [ 312s] Linking C executable duid-gadget [ 312s] Linking C shared library libcryptsvc.so [ 312s] [100%] Built target duid-gadget [ 312s] [100%] Built target cryptsvc [ 312s] + exit 0 [ 312s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.GhNkrv [ 312s] + umask 022 [ 312s] + cd /home/abuild/rpmbuild/BUILD [ 312s] + cd libcryptsvc-0.0.1 [ 312s] + LANG=C [ 312s] + export LANG [ 312s] + unset DISPLAY [ 312s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 312s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 312s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 312s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/share/license [ 312s] + cat LICENSE.APLv2 [ 312s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm install [ 313s] [ 33%] Built target cryptsvc [ 313s] [100%] Built target duid-gadget [ 313s] Install the project... [ 313s] -- Install configuration: "" [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/lib/pkgconfig/cryptsvc.pc [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/lib/libcryptsvc.so.0.0.1 [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/lib/libcryptsvc.so.0 [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/lib/libcryptsvc.so [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr//include [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr//include/SecTzSvc.h [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr//include/SecCryptoSvc.h [ 313s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/opt/etc/duid-gadget [ 313s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/share/info/dir [ 313s] + find /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm -regex '.*\.la$' [ 313s] + xargs rm -f -- [ 313s] + find /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm -regex '.*\.a$' [ 313s] + xargs rm -f -- [ 313s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libcryptsvc-0.0.1 [ 313s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/usr/lib/libcryptsvc.so.0.0.1 [ 313s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm/opt/etc/duid-gadget [ 313s] symlinked /usr/lib/debug/usr/lib/libcryptsvc.so.0.0.1.debug to /usr/lib/debug/usr/lib/libcryptsvc.so.debug [ 313s] symlinked /usr/lib/debug/usr/lib/libcryptsvc.so.0.0.1.debug to /usr/lib/debug/usr/lib/libcryptsvc.so.0.debug [ 313s] 24 blocks [ 313s] + /usr/lib/rpm/check-buildroot [ 313s] + /usr/lib/rpm//brp-compress [ 313s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 313s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 314s] + /usr/lib/rpm/brp-python-hardlink [ 314s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 314s] Processing files: libcryptsvc-0.0.1-3.1.armv7l [ 314s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxkZWZpbmU+CiAgICAgICAgICAgICAgICA8ZG9t [ 314s] YWluIG5hbWU9ImxpYmNyeXB0c3ZjIi8+CiAgICAgICAgPC9kZWZpbmU+CiAgICAg [ 314s] ICAgPHJlcXVlc3Q+CiAgICAgICAgICAgICAgICA8ZG9tYWluIG5hbWU9ImxpYmNy [ 314s] eXB0c3ZjIi8+CiAgICAgICAgPC9yZXF1ZXN0PgogICAgICAgIDxhc3NpZ24+CiAg [ 314s] ICAgICAgICAgICAgICA8ZmlsZXN5c3RlbSBwYXRoPSIvdXNyL2xpYi8qIiBsYWJl [ 314s] bD0iXyIvPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9vcHQvZXRjL2R1aWQtZ2FkZ2V0 [ 314s] IiBsYWJlbD0iXyIgZXhlY19sYWJlbD0ibm9uZSIvPgogICAgICAgIDwvYXNzaWdu [ 314s] Pgo8L21hbmlmZXN0Pgo= [ 314s] [ 314s] Provides: libcryptsvc.so.0 [ 314s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 314s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libcryptsvc.so.0 libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) [ 314s] Processing files: libcryptsvc-devel-0.0.1-3.1.armv7l [ 314s] Provides: pkgconfig(cryptsvc) = 0.0.1 [ 314s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 314s] Requires: /usr/bin/pkg-config pkgconfig(dlog) pkgconfig(libcrypto) pkgconfig(openssl) [ 314s] Processing files: libcryptsvc-debuginfo-0.0.1-3.1.armv7l [ 314s] Processing files: libcryptsvc-debugsource-0.0.1-3.1.armv7l [ 314s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 314s] Wrote: /home/abuild/rpmbuild/SRPMS/libcryptsvc-0.0.1-3.1.src.rpm [ 314s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-0.0.1-3.1.armv7l.rpm [ 314s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-devel-0.0.1-3.1.armv7l.rpm [ 314s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-debuginfo-0.0.1-3.1.armv7l.rpm [ 314s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-debugsource-0.0.1-3.1.armv7l.rpm [ 314s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yljVIg [ 314s] + umask 022 [ 314s] + cd /home/abuild/rpmbuild/BUILD [ 314s] + cd libcryptsvc-0.0.1 [ 314s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libcryptsvc-0.0.1-3.1.arm [ 314s] + exit 0 [ 314s] ... checking for files with abuild user/group [ 314s] ... creating baselibs [ 315s] ... saving built statistics [ 315s] /.build/build: line 3144: mount: command not found [ 315s] ERROR: no root disk device found, yet another new device name? [ 315s] ls: cannot access /sys/block/: No such file or directory [ 315s] /.build/build: line 3159: umount: command not found [ 315s] ... saving built packages [ 315s] /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-0.0.1-3.1.armv7l.rpm [ 315s] /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-debuginfo-0.0.1-3.1.armv7l.rpm [ 315s] /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-debugsource-0.0.1-3.1.armv7l.rpm [ 315s] /home/abuild/rpmbuild/RPMS/armv7l/libcryptsvc-devel-0.0.1-3.1.armv7l.rpm [ 315s] /home/abuild/rpmbuild/SRPMS/libcryptsvc-0.0.1-3.1.src.rpm [ 315s] /home/abuild/rpmbuild/OTHER/_statistics [ 315s] [ 315s] w17 finished "build libcryptsvc.spec" at Wed Feb 4 12:44:47 UTC 2015. [ 315s] [ 326s] [ 312.921120] SysRq : Power Off [ 326s] [ 312.933423] Power down. [ 327s] build: extracting built packages... [ 327s] libcryptsvc-0.0.1-3.1.armv7l.rpm [ 327s] libcryptsvc-debuginfo-0.0.1-3.1.armv7l.rpm [ 327s] libcryptsvc-debugsource-0.0.1-3.1.armv7l.rpm [ 327s] libcryptsvc-devel-0.0.1-3.1.armv7l.rpm [ 327s] libcryptsvc-0.0.1-3.1.src.rpm [ 327s] _statistics Retried build at Thu Feb 5 21:11:25 2015 returned same result, skipped