[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w16 started "build _service:gbs:libmm-imgp-gstcs.spec" at Wed Feb 4 12:58:08 UTC 2015. [ 0s] [ 0s] Building libmm-imgp-gstcs for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '276dddc6b1d6e57b99c915ae054190ec' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:libmm-imgp-gstcs.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:libmm-imgp-gstcs.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:libmm-imgp-gstcs.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: dbus-libs -> dbus [ 4s] breaking dependency dbus -> dbus-libs [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 11s] booting kvm ... [ 11s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 14s] doing fast boot [ 14s] Creating device nodes with udev [ 22s] Waiting for device /dev/vda to appear: ok [ 22s] fsck from util-linux 2.21.2 [ 22s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 22s] /dev/vda: clean, 4766/2392064 files, 242144/9568256 blocks [ 22s] fsck succeeded. Mounting root device read-write. [ 22s] Mounting root /dev/vda [ 22s] mount -o rw -t ext4 /dev/vda /root [ 23s] replacing /etc/mtab with symlink to /proc/self/mounts [ 23s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 23s] 2nd stage started in virtual machine [ 23s] machine type: armv7l [ 23s] switching personality to 8... [ 24s] 2nd stage started in virtual machine [ 24s] machine type: armv7l [ 24s] /.build/build: line 770: mount: command not found [ 24s] swapon on /dev/vdb [ 24s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 24s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 24s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 24s] logging output to //.build.log... [ 24s] processing specfile /.build-srcdir/_service:gbs:libmm-imgp-gstcs.spec ... [ 24s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libmm-imgp-gstcs.spec build rpmlint-Factory ... [ 25s] running rpm-x86-arm postinstall script [ 26s] running rpm-libs-x86-arm postinstall script [ 26s] running tizen-accelerator postinstall script [ 27s] running bash-x86-arm postinstall script [ 27s] initializing rpm db... [ 32s] [1/184] installing cross-armv7l-platformfile-0.0.1-3.1 [ 32s] [2/184] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 33s] [3/184] installing libX11-common-1.5.0-3.1 [ 33s] [4/184] installing tizen-release-2.2.0-3.1 [ 33s] [5/184] installing tzdata-2013h-3.1 [ 33s] [6/184] installing libgcc-4.6.4-3.14 [ 33s] [7/184] installing setup-0.1-3.1 [ 33s] [8/184] installing filesystem-0.1-3.1 [ 39s] warning: group lock does not exist - using root [ 39s] [9/184] installing eglibc-2.13-3.9 [ 41s] [10/184] installing libstdc++-4.6.4-3.14 [ 42s] [11/184] installing eglibc-common-2.13-3.9 [ 45s] [12/184] installing libstdc++-devel-4.6.4-3.14 [ 46s] [13/184] installing bash-4.1-3.1 [ 46s] [14/184] installing bzip2-libs-1.0.5-3.2 [ 46s] [15/184] installing capi-base-common-0.1.7-3.1 [ 46s] [16/184] installing cpio-2.8-3.1 [ 47s] [17/184] installing diffutils-3.0-3.1 [ 47s] [18/184] installing e2fsprogs-libs-1.41.9-3.1 [ 48s] [19/184] installing elfutils-libelf-0.152-3.8 [ 49s] [20/184] installing expat-2.0.1-3.2 [ 49s] [21/184] installing fdupes-1.40-3.1 [ 50s] [22/184] installing findutils-4.2.31-3.1 [ 50s] [23/184] installing gdbm-1.8.3-3.3 [ 50s] [24/184] installing libXau-1.0.7-3.1 [ 51s] [25/184] installing libasound-1.0.25-1.0.25-2.1 [ 51s] [26/184] installing libattr-2.4.44-3.4 [ 52s] [27/184] installing libdrm2-2.4.35-3.1 [ 52s] [28/184] installing libffi-3.0.9-3.1 [ 52s] [29/184] installing libgomp-4.6.4-3.14 [ 52s] [30/184] installing liblua-5.1.4-3.2 [ 53s] [31/184] installing libogg-1.2.1-3.1 [ 53s] [32/184] installing libuuid-2.20.2-3.1 [ 54s] [33/184] installing lzo-2.03-3.3 [ 54s] [34/184] installing m4-1.4.14-3.1 [ 55s] [35/184] installing net-tools-1.60-3.1 [ 55s] [36/184] installing nspr-4.9-3.6 [ 55s] [37/184] installing nss-softokn-freebl-3.12.9-3.11 [ 56s] [38/184] installing patch-2.6-3.1 [ 56s] [39/184] installing pkg-config-0.25-2.2 [ 56s] [40/184] installing popt-1.16-3.2 [ 57s] [41/184] installing readline-5.2-3.2 [ 57s] [42/184] installing sed-4.1.5-3.1 [ 58s] [43/184] installing smack-1.0+s14-3.2 [ 58s] [44/184] installing sqlite-3.7.13-3.2 [ 58s] [45/184] installing systemd-libs-210-7.1 [ 59s] [46/184] installing tar-1.17-3.2 [ 59s] [47/184] installing xz-libs-5.0.3-3.3 [ 60s] [48/184] installing zlib-1.2.5-3.8 [ 63s] [49/184] installing gmp-4.2.1-3.2 [ 63s] [50/184] installing libpcre-7.7-3.3 [ 64s] [51/184] installing ncurses-libs-5.7-3.2 [ 64s] [52/184] installing build-compare-2009.10.14-3.5 [ 65s] [53/184] installing qemu.x86_64-1.2-5.1 [ 69s] [54/184] installing capi-base-common-devel-0.1.7-3.1 [ 72s] [55/184] installing eglibc-headers-2.13-3.9 [ 73s] [56/184] installing libcap-2.21-3.2 [ 73s] [57/184] installing unzip-6.0-3.4 [ 73s] [58/184] installing zlib-devel-1.2.5-3.8 [ 74s] [59/184] installing grep-2.5.1a-3.1 [ 75s] [60/184] installing libacl-2.2.49-3.2 [ 75s] [61/184] installing libfile-5.04-3.2 [ 75s] [62/184] installing libpython-2.7.1-3.3 [ 76s] [63/184] installing libtheora-1.1.1-3.1 [ 76s] [64/184] installing libvorbis-1.2.3-3.1 [ 76s] [65/184] installing libxcb-1.8.1-3.1 [ 77s] [66/184] installing libxml2-2.7.8-3.2 [ 77s] [67/184] installing lzo-minilzo-2.03-3.3 [ 77s] [68/184] installing make-3.82-3.2 [ 80s] [69/184] installing mpfr-3.0.0-3.2 [ 80s] [70/184] installing ncurses-5.7-3.2 [ 81s] [71/184] installing bzip2-1.0.5-3.2 [ 81s] [72/184] installing glib2-2.32.3-3.1 [ 82s] [73/184] installing kmod-libs-15-3.1 [ 83s] [74/184] installing libblkid-2.20.2-3.1 [ 83s] [75/184] installing smack-utils-1.0+s14-3.2 [ 86s] [76/184] installing xz-5.0.3-3.3 [ 87s] [77/184] installing binutils-2.22-3.4 [ 87s] [78/184] installing elfutils-libs-0.152-3.8 [ 88s] [79/184] installing nss-3.12.9-3.11 [ 89s] [80/184] installing perl-5.12.1-3.3 [ 124s] [81/184] installing ncurses-base-5.7-3.2 [ 125s] [82/184] installing perl-HTML-Tagset-3.20-3.1 [ 125s] [83/184] installing perl-IO-Compress-Base-2.008-3.3 [ 125s] [84/184] installing perl-Module-Pluggable-3.60-3.3 [ 126s] [85/184] installing perl-Pod-Escapes-1.04-3.3 [ 126s] [86/184] installing perl-TimeDate-1.20-3.1 [ 126s] [87/184] installing eglibc-devel-2.13-3.9 [ 126s] [88/184] installing file-5.04-3.2 [ 126s] [89/184] installing lzo-devel-2.03-3.3 [ 127s] [90/184] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 127s] [91/184] installing perl-devel-5.12.1-3.3 [ 136s] [92/184] installing perl-libs-5.12.1-3.3 [ 137s] [93/184] installing coreutils-6.9-3.3 [ 139s] [94/184] installing libX11-1.5.0-3.1 [ 139s] [95/184] installing libdlog-0.4.1-3.1 [ 140s] [96/184] installing libmount-2.20.2-3.1 [ 141s] [97/184] installing mpc-0.9-3.2 [ 141s] [98/184] installing xz-lzma-compat-5.0.3-3.3 [ 142s] [99/184] installing elfutils-0.152-3.8 [ 142s] [100/184] installing nss-sysinit-3.12.9-3.11 [ 143s] [101/184] installing python-base-2.7.1-3.3 [ 144s] [102/184] installing rpm-libs-4.9.1-4.1 [ 144s] [103/184] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 144s] [104/184] installing perl-Pod-Simple-3.07-3.3 [ 145s] [105/184] installing perl-Test-Simple-0.80-3.3 [ 145s] [106/184] installing tizen-accelerator-1.0.1-3.1 [ 146s] [107/184] installing libXdamage-1.1.3-3.1 [ 146s] [108/184] installing libXext-1.3.1-3.1 [ 146s] [109/184] installing libXrender-0.9.7-3.1 [ 146s] [110/184] installing libdlog-devel-0.4.1-3.1 [ 146s] [111/184] installing libmm-common-0.2.84-3.1 [ 146s] [112/184] installing perl-IO-Compress-Zlib-2.008-3.3 [ 147s] [113/184] installing perl-Test-Harness-3.12-3.3 [ 147s] [114/184] installing gawk-3.1.5-3.2 [ 148s] [115/184] installing gzip-1.3.12-3.1 [ 148s] [116/184] installing build-2011.01.10a-3.1 [ 148s] [117/184] installing gstreamer-0.10.37-3.1 [ 149s] [118/184] installing python-devel-2.7.1-3.3 [ 151s] [119/184] installing rpm-4.9.1-4.1 [ 151s] [120/184] installing cpp-4.6.4-3.14 [ 153s] [121/184] installing dbus-1.6.4-3.1 [ 154s] [122/184] installing util-linux-2.20.2-3.1 [ 154s] [123/184] installing glib2-devel-2.32.3-3.1 [ 155s] [124/184] installing libmm-log-devel-0.1.9-3.1 [ 156s] [125/184] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 156s] [126/184] installing dbus-libs-1.6.4-3.1 [ 157s] [127/184] installing eglibc-x86-arm-2.13-2.3 [ 159s] [128/184] installing elfutils-libelf-x86-arm-0.152-2.1 [ 160s] [129/184] installing elfutils-libs-x86-arm-0.152-2.3 [ 161s] [130/184] installing gmp-x86-arm-4.2.1-2.1 [ 161s] [131/184] installing libacl-x86-arm-2.2.49-2.1 [ 161s] [132/184] installing libattr-x86-arm-2.4.44-2.1 [ 162s] [133/184] installing libcap-x86-arm-2.21-2.1 [ 163s] [134/184] installing libfile-x86-arm-5.04-2.2 [ 163s] [135/184] installing libgcc-x86-arm-4.6.4-2.1 [ 164s] [136/184] installing liblua-x86-arm-5.1.4-2.1 [ 164s] [137/184] installing mpc-x86-arm-0.9-2.1 [ 164s] [138/184] installing mpfr-x86-arm-3.0.0-2.1 [ 164s] [139/184] installing ncurses-libs-x86-arm-5.7-2.2 [ 164s] [140/184] installing nspr-x86-arm-4.9-2.3 [ 165s] [141/184] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 165s] [142/184] installing nss-x86-arm-3.12.9-2.3 [ 165s] [143/184] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 166s] [144/184] installing popt-x86-arm-1.16-2.1 [ 166s] [145/184] installing rpm-libs-x86-arm-4.9.1-2.2 [ 166s] [146/184] installing sqlite-x86-arm-3.7.13-2.1 [ 167s] [147/184] installing xz-libs-x86-arm-5.0.3-2.1 [ 168s] [148/184] installing zlib-x86-arm-1.2.5-2.1 [ 168s] [149/184] installing libXv-1.0.7-3.1 [ 168s] [150/184] installing libdri2-0.1.0-3.1 [ 169s] [151/184] installing libXrandr-1.4.0-3.1 [ 169s] [152/184] installing libxml2-devel-2.7.8-3.2 [ 169s] [153/184] installing systemd-210-7.1 [ 170s] [154/184] installing gcc-4.6.4-3.14 [ 170s] [155/184] installing rpm-build-4.9.1-4.1 [ 171s] [156/184] installing perl-CPAN-1.9205-3.3 [ 171s] [157/184] installing bash-x86-arm-4.1-2.1 [ 171s] [158/184] installing fdupes-x86-arm-1.40-2.1 [ 171s] [159/184] installing findutils-x86-arm-4.2.31-2.1 [ 171s] [160/184] installing gawk-x86-arm-3.1.5-2.2 [ 172s] [161/184] installing gstreamer-devel-0.10.37-3.1 [ 172s] [162/184] installing gzip-x86-arm-1.3.12-2.1 [ 172s] [163/184] installing libmm-common-devel-0.2.84-3.1 [ 172s] [164/184] installing make-x86-arm-3.82-2.1 [ 172s] [165/184] installing sed-x86-arm-4.1.5-2.1 [ 172s] [166/184] installing tar-x86-arm-1.17-2.2 [ 173s] [167/184] installing diffutils-x86-arm-3.0-2.1 [ 173s] [168/184] installing patch-x86-arm-2.6-2.1 [ 173s] [169/184] installing autoconf-2.68-3.1 [ 173s] [170/184] installing coreutils-x86-arm-6.9-2.1 [ 176s] [171/184] installing file-x86-arm-5.04-2.1 [ 176s] [172/184] installing libslp-utilx-0.4.5-3.1 [ 176s] [173/184] installing libtbm-1.1.1-3.1 [ 176s] [174/184] installing vconf-0.2.83-3.1 [ 176s] Failed to get D-Bus connection: Unknown error 4294967295 [ 176s] warning: %post(vconf-0.2.83-3.1.armv7l) scriptlet failed, exit status 1 [ 176s] [175/184] installing elfutils-x86-arm-0.152-2.3 [ 176s] [176/184] installing gcc-c++-4.6.4-3.14 [ 177s] [177/184] installing rpm-x86-arm-4.9.1-2.2 [ 178s] /bin/rpm.orig-arm already present - skipping. [ 178s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 178s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 178s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 178s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 178s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 178s] [178/184] installing rpm-build-x86-arm-4.9.1-2.2 [ 178s] [179/184] installing automake-1.11.1-3.1 [ 178s] [180/184] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 181s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 181s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 181s] [181/184] installing gst-plugins-base-0.10.37-3.1 [ 182s] [182/184] installing gst-plugins-base-devel-0.10.37-3.1 [ 182s] [183/184] installing libtool-2.2.6b-3.2 [ 183s] [184/184] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 184s] removing nis flags from //etc/nsswitch.conf... [ 184s] now finalizing build dir... [ 184s] /.build/build: line 2585: mount: command not found [ 184s] /.build/build: line 2586: mount: command not found [ 188s] build target is armv7l-tizen-linux [ 188s] ----------------------------------------------------------------- [ 188s] I have the following modifications for libmm-imgp-gstcs.spec: [ 188s] 6c6 [ 188s] < Release: 14 [ 188s] --- [ 188s] > Release: 3.1 [ 188s] ----------------------------------------------------------------- [ 188s] ----- building libmm-imgp-gstcs.spec (user abuild) [ 188s] ----------------------------------------------------------------- [ 188s] ----------------------------------------------------------------- [ 188s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/276dddc6b1d6e57b99c915ae054190ec-libmm-imgp-gstcs' /home/abuild/rpmbuild/SOURCES/libmm-imgp-gstcs.spec [ 189s] Building target platforms: armv7l-tizen-linux [ 189s] Building for target armv7l-tizen-linux [ 189s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jNY5HZ [ 189s] + umask 022 [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + LANG=C [ 189s] + export LANG [ 189s] + unset DISPLAY [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + rm -rf libmm-imgp-gstcs-0.6 [ 189s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libmm-imgp-gstcs-0.6.tar.gz [ 189s] + /bin/tar -xf - [ 189s] + STATUS=0 [ 189s] + '[' 0 -ne 0 ']' [ 189s] + cd libmm-imgp-gstcs-0.6 [ 189s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 189s] + exit 0 [ 189s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XNVDNN [ 189s] + umask 022 [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + cd libmm-imgp-gstcs-0.6 [ 189s] + LANG=C [ 189s] + export LANG [ 189s] + unset DISPLAY [ 189s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 189s] + export CFLAGS [ 189s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 189s] + export CXXFLAGS [ 189s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 189s] + export FFLAGS [ 189s] + LD_AS_NEEDED=1 [ 189s] + export LD_AS_NEEDED [ 189s] + ./autogen.sh [ 204s] libtoolize: putting auxiliary files in `.'. [ 204s] libtoolize: copying file `./ltmain.sh' [ 204s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 204s] libtoolize: copying file `m4/libtool.m4' [ 204s] libtoolize: copying file `m4/ltoptions.m4' [ 204s] libtoolize: copying file `m4/ltsugar.m4' [ 204s] libtoolize: copying file `m4/ltversion.m4' [ 204s] libtoolize: copying file `m4/lt~obsolete.m4' [ 221s] configure.ac:12: installing `./config.guess' [ 221s] configure.ac:12: installing `./config.sub' [ 222s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DEXPORT_API="__attribute__((visibility(\"default\")))" -D_MM_PROJECT_FLOATER' [ 222s] + LDFLAGS='-Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed' [ 222s] + ./configure --prefix=/usr [ 222s] checking for a BSD-compatible install... /usr/bin/install -c [ 223s] checking whether build environment is sane... yes [ 224s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 224s] checking for gawk... gawk [ 224s] checking whether make sets $(MAKE)... yes [ 224s] checking for gcc... gcc [ 225s] checking whether the C compiler works... yes [ 225s] checking for C compiler default output file name... a.out [ 226s] checking for suffix of executables... [ 226s] checking whether we are cross compiling... no [ 226s] checking for suffix of object files... o [ 226s] checking whether we are using the GNU C compiler... yes [ 226s] checking whether gcc accepts -g... yes [ 227s] checking for gcc option to accept ISO C89... none needed [ 227s] checking for style of include used by make... GNU [ 227s] checking dependency style of gcc... gcc3 [ 227s] checking build system type... armv7l-unknown-linux-gnueabi [ 227s] checking host system type... armv7l-unknown-linux-gnueabi [ 227s] checking for a sed that does not truncate output... /bin/sed [ 227s] checking for grep that handles long lines and -e... /bin/grep [ 227s] checking for egrep... /bin/grep -E [ 227s] checking for fgrep... /bin/grep -F [ 227s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 227s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 227s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 227s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 227s] checking whether ln -s works... yes [ 227s] checking the maximum length of command line arguments... 1572864 [ 227s] checking whether the shell understands some XSI constructs... yes [ 227s] checking whether the shell understands "+="... yes [ 227s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 227s] checking for objdump... objdump [ 227s] checking how to recognize dependent libraries... pass_all [ 227s] checking for ar... ar [ 227s] checking for strip... strip [ 227s] checking for ranlib... ranlib [ 227s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 227s] checking how to run the C preprocessor... gcc -E [ 227s] checking for ANSI C header files... yes [ 227s] checking for sys/types.h... yes [ 227s] checking for sys/stat.h... yes [ 227s] checking for stdlib.h... yes [ 227s] checking for string.h... yes [ 227s] checking for memory.h... yes [ 227s] checking for strings.h... yes [ 227s] checking for inttypes.h... yes [ 227s] checking for stdint.h... yes [ 227s] checking for unistd.h... yes [ 227s] checking for dlfcn.h... yes [ 227s] checking for objdir... .libs [ 228s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 228s] checking for gcc option to produce PIC... -fPIC -DPIC [ 228s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 228s] checking if gcc static flag -static works... no [ 228s] checking if gcc supports -c -o file.o... yes [ 228s] checking if gcc supports -c -o file.o... (cached) yes [ 228s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 228s] checking whether -lc should be explicitly linked in... no [ 228s] checking dynamic linker characteristics... GNU/Linux ld.so [ 228s] checking how to hardcode library paths into programs... immediate [ 228s] checking whether stripping libraries is possible... yes [ 228s] checking if libtool supports shared libraries... yes [ 228s] checking whether to build shared libraries... yes [ 228s] checking whether to build static libraries... yes [ 228s] checking for ANSI C header files... (cached) yes [ 228s] checking fcntl.h usability... yes [ 228s] checking fcntl.h presence... yes [ 228s] checking for fcntl.h... yes [ 228s] checking for memory.h... (cached) yes [ 228s] checking for stdlib.h... (cached) yes [ 228s] checking for string.h... (cached) yes [ 228s] checking for unistd.h... (cached) yes [ 228s] checking whether struct tm is in sys/time.h or time.h... time.h [ 228s] checking for stdlib.h... (cached) yes [ 228s] checking for GNU libc compatible malloc... yes [ 228s] checking for memset... yes [ 228s] checking for strdup... yes [ 228s] checking for pkg-config... /usr/bin/pkg-config [ 228s] checking pkg-config is at least version 0.9.0... yes [ 228s] checking for MMCOMMON... yes [ 228s] checking for MMLOG... yes [ 228s] checking for GLIB... yes [ 228s] checking for GST... yes [ 228s] checking for GSTAPP... yes [ 229s] checking for GMODULE... yes [ 229s] configure: creating ./config.status [ 229s] config.status: creating Makefile [ 229s] config.status: creating gstcs/Makefile [ 229s] config.status: creating gstcs/mmutil-gstcs.pc [ 229s] config.status: creating config.h [ 229s] config.status: executing depfiles commands [ 229s] config.status: executing libtool commands [ 229s] + make -j4 [ 229s] make all-recursive [ 229s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 229s] Making all in gstcs [ 229s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 229s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I./include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DGST_EXT_BASEPARSER_MODIFICATION -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mm_log -I/usr/include/dlog -DMMF_LOG_OWNER=0x0100 -DMMF_DEBUG_PREFIX=\"MMF-IMAGE\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DEXPORT_API="__attribute__((visibility(\"default\")))" -D_MM_PROJECT_FLOATER -MT libmmutil_imgp_gstcs_la-mm_util_gstcs.lo -MD -MP -MF .deps/libmmutil_imgp_gstcs_la-mm_util_gstcs.Tpo -c -o libmmutil_imgp_gstcs_la-mm_util_gstcs.lo `test -f 'mm_util_gstcs.c' || echo './'`mm_util_gstcs.c [ 229s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I./include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DGST_EXT_BASEPARSER_MODIFICATION -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mm_log -I/usr/include/dlog -DMMF_LOG_OWNER=0x0100 -DMMF_DEBUG_PREFIX=\"MMF-IMAGE\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb "-DEXPORT_API=__attribute__((visibility(\"default\")))" -D_MM_PROJECT_FLOATER -MT libmmutil_imgp_gstcs_la-mm_util_gstcs.lo -MD -MP -MF .deps/libmmutil_imgp_gstcs_la-mm_util_gstcs.Tpo -c mm_util_gstcs.c -fPIC -DPIC -o .libs/libmmutil_imgp_gstcs_la-mm_util_gstcs.o [ 229s] mm_util_gstcs.c:130:1: warning: '_mm_on_sink_message' defined but not used [-Wunused-function] [ 230s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I./include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DGST_EXT_BASEPARSER_MODIFICATION -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mm_log -I/usr/include/dlog -DMMF_LOG_OWNER=0x0100 -DMMF_DEBUG_PREFIX=\"MMF-IMAGE\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb "-DEXPORT_API=__attribute__((visibility(\"default\")))" -D_MM_PROJECT_FLOATER -MT libmmutil_imgp_gstcs_la-mm_util_gstcs.lo -MD -MP -MF .deps/libmmutil_imgp_gstcs_la-mm_util_gstcs.Tpo -c mm_util_gstcs.c -o libmmutil_imgp_gstcs_la-mm_util_gstcs.o >/dev/null 2>&1 [ 230s] mv -f .deps/libmmutil_imgp_gstcs_la-mm_util_gstcs.Tpo .deps/libmmutil_imgp_gstcs_la-mm_util_gstcs.Plo [ 230s] /bin/sh ../libtool --tag=CC --mode=link gcc -I./include -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mmf -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/mm_log -I/usr/include/dlog -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DGST_EXT_BASEPARSER_MODIFICATION -pthread -I/usr/include/gstreamer-0.10 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -DUSE_DLOG -DTIZEN_ENGINEER_MODE -I/usr/include/mm_log -I/usr/include/dlog -DMMF_LOG_OWNER=0x0100 -DMMF_DEBUG_PREFIX=\"MMF-IMAGE\" -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DEXPORT_API="__attribute__((visibility(\"default\")))" -D_MM_PROJECT_FLOATER -Wl,--rpath=/usr/lib -Wl,--hash-style=both -Wl,--as-needed -o libmmutil_imgp_gstcs.la -rpath /usr/lib libmmutil_imgp_gstcs_la-mm_util_gstcs.lo -lmmfcommon -lglib-2.0 -ldlog -lpthread -lcapi-base-common -lglib-2.0 -pthread -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0 -pthread -lgstapp-0.10 -lgstbase-0.10 -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0 -ldlog -lpthread -lcapi-base-common [ 230s] libtool: link: gcc -shared .libs/libmmutil_imgp_gstcs_la-mm_util_gstcs.o -Wl,--as-needed -lmmfcommon -lgstapp-0.10 -lgstbase-0.10 -lgstreamer-0.10 -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lrt -lxml2 -lglib-2.0 -ldlog -lpthread -lcapi-base-common -pthread -pthread -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,--rpath=/usr/lib -Wl,--hash-style=both -pthread -pthread -pthread -Wl,-soname -Wl,libmmutil_imgp_gstcs.so.0 -o .libs/libmmutil_imgp_gstcs.so.0.0.0 [ 230s] libtool: link: (cd ".libs" && rm -f "libmmutil_imgp_gstcs.so.0" && ln -s "libmmutil_imgp_gstcs.so.0.0.0" "libmmutil_imgp_gstcs.so.0") [ 230s] libtool: link: (cd ".libs" && rm -f "libmmutil_imgp_gstcs.so" && ln -s "libmmutil_imgp_gstcs.so.0.0.0" "libmmutil_imgp_gstcs.so") [ 230s] libtool: link: ar cru .libs/libmmutil_imgp_gstcs.a libmmutil_imgp_gstcs_la-mm_util_gstcs.o [ 230s] libtool: link: ranlib .libs/libmmutil_imgp_gstcs.a [ 230s] libtool: link: ( cd ".libs" && rm -f "libmmutil_imgp_gstcs.la" && ln -s "../libmmutil_imgp_gstcs.la" "libmmutil_imgp_gstcs.la" ) [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] make[2]: Nothing to be done for `all-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] + exit 0 [ 230s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.JdLKu9 [ 230s] + umask 022 [ 230s] + cd /home/abuild/rpmbuild/BUILD [ 230s] + cd libmm-imgp-gstcs-0.6 [ 230s] + LANG=C [ 230s] + export LANG [ 230s] + unset DISPLAY [ 230s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 230s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 230s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 230s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm install [ 230s] Making install in gstcs [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 230s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib" [ 230s] /bin/sh ../libtool --mode=install /usr/bin/install -c libmmutil_imgp_gstcs.la '/home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib' [ 230s] libtool: install: /usr/bin/install -c .libs/libmmutil_imgp_gstcs.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.so.0.0.0 [ 230s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib && { ln -s -f libmmutil_imgp_gstcs.so.0.0.0 libmmutil_imgp_gstcs.so.0 || { rm -f libmmutil_imgp_gstcs.so.0 && ln -s libmmutil_imgp_gstcs.so.0.0.0 libmmutil_imgp_gstcs.so.0; }; }) [ 230s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib && { ln -s -f libmmutil_imgp_gstcs.so.0.0.0 libmmutil_imgp_gstcs.so || { rm -f libmmutil_imgp_gstcs.so && ln -s libmmutil_imgp_gstcs.so.0.0.0 libmmutil_imgp_gstcs.so; }; }) [ 230s] libtool: install: /usr/bin/install -c .libs/libmmutil_imgp_gstcs.lai /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.la [ 230s] libtool: install: /usr/bin/install -c .libs/libmmutil_imgp_gstcs.a /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.a [ 230s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.a [ 230s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.a [ 230s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 230s] make[2]: Nothing to be done for `install-data-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6/gstcs' [ 230s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] make[2]: Nothing to be done for `install-exec-am'. [ 230s] make[2]: Nothing to be done for `install-data-am'. [ 230s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6' [ 230s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/share/info/dir [ 230s] + xargs rm -f -- [ 230s] + find /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm -regex '.*\.la$' [ 230s] + find /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm -regex '.*\.a$' [ 230s] + xargs rm -f -- [ 230s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/share/license [ 230s] + cp LICENSE /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/share/license/libmm-imgp-gstcs [ 230s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libmm-imgp-gstcs-0.6 [ 230s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm/usr/lib/libmmutil_imgp_gstcs.so.0.0.0 [ 231s] symlinked /usr/lib/debug/usr/lib/libmmutil_imgp_gstcs.so.0.0.0.debug to /usr/lib/debug/usr/lib/libmmutil_imgp_gstcs.so.0.debug [ 231s] symlinked /usr/lib/debug/usr/lib/libmmutil_imgp_gstcs.so.0.0.0.debug to /usr/lib/debug/usr/lib/libmmutil_imgp_gstcs.so.debug [ 231s] 80 blocks [ 231s] + /usr/lib/rpm/check-buildroot [ 231s] + /usr/lib/rpm//brp-compress [ 231s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 231s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 231s] + /usr/lib/rpm/brp-python-hardlink [ 231s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 231s] Processing files: libmm-imgp-gstcs-0.6-3.1.armv7l [ 231s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJfIiAvPgoJPC9y [ 231s] ZXF1ZXN0Pgo8L21hbmlmZXN0Pgo= [ 231s] [ 231s] Provides: libmmutil_imgp_gstcs.so.0 [ 231s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 231s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 231s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 231s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 231s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libdlog.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libglib-2.0.so.0 libgobject-2.0.so.0 libgstapp-0.10.so.0 libgstreamer-0.10.so.0 libmmutil_imgp_gstcs.so.0 libpthread.so.0 [ 231s] Processing files: libmm-imgp-gstcs-debuginfo-0.6-3.1.armv7l [ 231s] Processing files: libmm-imgp-gstcs-debugsource-0.6-3.1.armv7l [ 231s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 231s] Wrote: /home/abuild/rpmbuild/SRPMS/libmm-imgp-gstcs-0.6-3.1.src.rpm [ 231s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-0.6-3.1.armv7l.rpm [ 231s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-debuginfo-0.6-3.1.armv7l.rpm [ 231s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-debugsource-0.6-3.1.armv7l.rpm [ 231s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.y5rH13 [ 231s] + umask 022 [ 231s] + cd /home/abuild/rpmbuild/BUILD [ 231s] + cd libmm-imgp-gstcs-0.6 [ 231s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 231s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-imgp-gstcs-0.6-3.1.arm [ 231s] + exit 0 [ 231s] ... checking for files with abuild user/group [ 231s] ... creating baselibs [ 232s] ... saving built statistics [ 232s] /.build/build: line 3144: mount: command not found [ 232s] ERROR: no root disk device found, yet another new device name? [ 232s] ls: cannot access /sys/block/: No such file or directory [ 232s] /.build/build: line 3159: umount: command not found [ 232s] ... saving built packages [ 232s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-0.6-3.1.armv7l.rpm [ 232s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-debuginfo-0.6-3.1.armv7l.rpm [ 232s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-imgp-gstcs-debugsource-0.6-3.1.armv7l.rpm [ 232s] /home/abuild/rpmbuild/SRPMS/libmm-imgp-gstcs-0.6-3.1.src.rpm [ 232s] /home/abuild/rpmbuild/OTHER/_statistics [ 232s] [ 232s] w16 finished "build libmm-imgp-gstcs.spec" at Wed Feb 4 13:01:59 UTC 2015. [ 232s] [ 235s] [ 221.310798] SysRq : Power Off [ 235s] [ 221.420236] Power down. [ 235s] build: extracting built packages... [ 235s] libmm-imgp-gstcs-0.6-3.1.armv7l.rpm [ 235s] libmm-imgp-gstcs-debuginfo-0.6-3.1.armv7l.rpm [ 235s] libmm-imgp-gstcs-debugsource-0.6-3.1.armv7l.rpm [ 235s] libmm-imgp-gstcs-0.6-3.1.src.rpm [ 235s] _statistics Retried build at Thu Feb 5 21:25:48 2015 returned same result, skipped