[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w22 started "build _service:gbs:libmm-log.spec" at Wed Feb 4 12:37:50 UTC 2015. [ 0s] [ 0s] Building libmm-log for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'f8ddc40cc88e42632ecc0949d278f2b8' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:libmm-log.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:libmm-log.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:libmm-log.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 19s] booting kvm ... [ 19s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 23s] doing fast boot [ 23s] Creating device nodes with udev [ 27s] Waiting for device /dev/vda to appear: ok [ 27s] fsck from util-linux 2.21.2 [ 27s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 27s] /dev/vda: clean, 4688/2392064 files, 237254/9568256 blocks [ 27s] fsck succeeded. Mounting root device read-write. [ 27s] Mounting root /dev/vda [ 27s] mount -o rw -t ext4 /dev/vda /root [ 32s] replacing /etc/mtab with symlink to /proc/self/mounts [ 34s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 49s] 2nd stage started in virtual machine [ 49s] machine type: armv7l [ 49s] switching personality to 8... [ 49s] 2nd stage started in virtual machine [ 49s] machine type: armv7l [ 49s] /.build/build: line 770: mount: command not found [ 50s] swapon on /dev/vdb [ 50s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 50s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 53s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 54s] logging output to //.build.log... [ 55s] processing specfile /.build-srcdir/_service:gbs:libmm-log.spec ... [ 55s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libmm-log.spec build rpmlint-Factory ... [ 65s] running rpm-x86-arm postinstall script [ 65s] running rpm-libs-x86-arm postinstall script [ 65s] running tizen-accelerator postinstall script [ 66s] running bash-x86-arm postinstall script [ 67s] initializing rpm db... [ 71s] [1/145] installing cross-armv7l-platformfile-0.0.1-3.1 [ 71s] [2/145] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 71s] [3/145] installing tizen-release-2.2.0-3.1 [ 72s] [4/145] installing tzdata-2013h-3.1 [ 72s] [5/145] installing libgcc-4.6.4-3.14 [ 72s] [6/145] installing setup-0.1-3.1 [ 72s] [7/145] installing filesystem-0.1-3.1 [ 72s] warning: group lock does not exist - using root [ 73s] [8/145] installing eglibc-2.13-3.9 [ 74s] [9/145] installing libstdc++-4.6.4-3.14 [ 75s] [10/145] installing eglibc-common-2.13-3.9 [ 75s] [11/145] installing libstdc++-devel-4.6.4-3.14 [ 76s] [12/145] installing bash-4.1-3.1 [ 76s] [13/145] installing bzip2-libs-1.0.5-3.2 [ 76s] [14/145] installing capi-base-common-0.1.7-3.1 [ 76s] [15/145] installing cpio-2.8-3.1 [ 77s] [16/145] installing diffutils-3.0-3.1 [ 77s] [17/145] installing e2fsprogs-libs-1.41.9-3.1 [ 77s] [18/145] installing elfutils-libelf-0.152-3.8 [ 77s] [19/145] installing fdupes-1.40-3.1 [ 77s] [20/145] installing findutils-4.2.31-3.1 [ 77s] [21/145] installing gdbm-1.8.3-3.3 [ 77s] [22/145] installing libattr-2.4.44-3.4 [ 77s] [23/145] installing libgomp-4.6.4-3.14 [ 78s] [24/145] installing liblua-5.1.4-3.2 [ 78s] [25/145] installing libuuid-2.20.2-3.1 [ 78s] [26/145] installing lzo-2.03-3.3 [ 78s] [27/145] installing m4-1.4.14-3.1 [ 78s] [28/145] installing net-tools-1.60-3.1 [ 78s] [29/145] installing nspr-4.9-3.6 [ 78s] [30/145] installing nss-softokn-freebl-3.12.9-3.11 [ 79s] [31/145] installing patch-2.6-3.1 [ 79s] [32/145] installing pkg-config-0.25-2.2 [ 79s] [33/145] installing popt-1.16-3.2 [ 79s] [34/145] installing readline-5.2-3.2 [ 79s] [35/145] installing sed-4.1.5-3.1 [ 79s] [36/145] installing smack-1.0+s14-3.2 [ 79s] [37/145] installing sqlite-3.7.13-3.2 [ 80s] [38/145] installing tar-1.17-3.2 [ 80s] [39/145] installing xz-libs-5.0.3-3.3 [ 80s] [40/145] installing zlib-1.2.5-3.8 [ 80s] [41/145] installing gmp-4.2.1-3.2 [ 80s] [42/145] installing libpcre-7.7-3.3 [ 80s] [43/145] installing ncurses-libs-5.7-3.2 [ 80s] [44/145] installing build-compare-2009.10.14-3.5 [ 81s] [45/145] installing qemu.x86_64-1.2-5.1 [ 88s] [46/145] installing capi-base-common-devel-0.1.7-3.1 [ 89s] [47/145] installing eglibc-headers-2.13-3.9 [ 89s] [48/145] installing libcap-2.21-3.2 [ 89s] [49/145] installing unzip-6.0-3.4 [ 89s] [50/145] installing zlib-devel-1.2.5-3.8 [ 89s] [51/145] installing grep-2.5.1a-3.1 [ 90s] [52/145] installing libacl-2.2.49-3.2 [ 90s] [53/145] installing libfile-5.04-3.2 [ 90s] [54/145] installing lzo-minilzo-2.03-3.3 [ 90s] [55/145] installing make-3.82-3.2 [ 91s] [56/145] installing mpfr-3.0.0-3.2 [ 91s] [57/145] installing ncurses-5.7-3.2 [ 92s] [58/145] installing bzip2-1.0.5-3.2 [ 93s] [59/145] installing libblkid-2.20.2-3.1 [ 93s] [60/145] installing smack-utils-1.0+s14-3.2 [ 94s] [61/145] installing xz-5.0.3-3.3 [ 94s] [62/145] installing binutils-2.22-3.4 [ 95s] [63/145] installing elfutils-libs-0.152-3.8 [ 95s] [64/145] installing nss-3.12.9-3.11 [ 96s] [65/145] installing perl-5.12.1-3.3 [ 124s] [66/145] installing ncurses-base-5.7-3.2 [ 125s] [67/145] installing perl-HTML-Tagset-3.20-3.1 [ 125s] [68/145] installing perl-IO-Compress-Base-2.008-3.3 [ 127s] [69/145] installing perl-Module-Pluggable-3.60-3.3 [ 127s] [70/145] installing perl-Pod-Escapes-1.04-3.3 [ 127s] [71/145] installing perl-TimeDate-1.20-3.1 [ 128s] [72/145] installing eglibc-devel-2.13-3.9 [ 128s] [73/145] installing file-5.04-3.2 [ 128s] [74/145] installing lzo-devel-2.03-3.3 [ 128s] [75/145] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 128s] [76/145] installing perl-devel-5.12.1-3.3 [ 129s] [77/145] installing perl-libs-5.12.1-3.3 [ 130s] [78/145] installing coreutils-6.9-3.3 [ 138s] [79/145] installing libdlog-0.4.1-3.1 [ 139s] [80/145] installing libmount-2.20.2-3.1 [ 140s] [81/145] installing mpc-0.9-3.2 [ 140s] [82/145] installing xz-lzma-compat-5.0.3-3.3 [ 140s] [83/145] installing elfutils-0.152-3.8 [ 141s] [84/145] installing nss-sysinit-3.12.9-3.11 [ 141s] [85/145] installing rpm-libs-4.9.1-4.1 [ 144s] [86/145] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 145s] [87/145] installing perl-Pod-Simple-3.07-3.3 [ 145s] [88/145] installing perl-Test-Simple-0.80-3.3 [ 146s] [89/145] installing tizen-accelerator-1.0.1-3.1 [ 147s] [90/145] installing libdlog-devel-0.4.1-3.1 [ 147s] [91/145] installing perl-IO-Compress-Zlib-2.008-3.3 [ 147s] [92/145] installing perl-Test-Harness-3.12-3.3 [ 147s] [93/145] installing gawk-3.1.5-3.2 [ 148s] [94/145] installing gzip-1.3.12-3.1 [ 148s] [95/145] installing build-2011.01.10a-3.1 [ 148s] [96/145] installing rpm-4.9.1-4.1 [ 149s] [97/145] installing cpp-4.6.4-3.14 [ 150s] [98/145] installing util-linux-2.20.2-3.1 [ 151s] [99/145] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 151s] [100/145] installing eglibc-x86-arm-2.13-2.3 [ 152s] [101/145] installing elfutils-libelf-x86-arm-0.152-2.1 [ 153s] [102/145] installing elfutils-libs-x86-arm-0.152-2.3 [ 153s] [103/145] installing gmp-x86-arm-4.2.1-2.1 [ 153s] [104/145] installing libacl-x86-arm-2.2.49-2.1 [ 154s] [105/145] installing libattr-x86-arm-2.4.44-2.1 [ 154s] [106/145] installing libcap-x86-arm-2.21-2.1 [ 154s] [107/145] installing libfile-x86-arm-5.04-2.2 [ 155s] [108/145] installing libgcc-x86-arm-4.6.4-2.1 [ 155s] [109/145] installing liblua-x86-arm-5.1.4-2.1 [ 155s] [110/145] installing mpc-x86-arm-0.9-2.1 [ 156s] [111/145] installing mpfr-x86-arm-3.0.0-2.1 [ 156s] [112/145] installing ncurses-libs-x86-arm-5.7-2.2 [ 156s] [113/145] installing nspr-x86-arm-4.9-2.3 [ 157s] [114/145] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 157s] [115/145] installing nss-x86-arm-3.12.9-2.3 [ 159s] [116/145] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 159s] [117/145] installing popt-x86-arm-1.16-2.1 [ 160s] [118/145] installing rpm-libs-x86-arm-4.9.1-2.2 [ 160s] [119/145] installing sqlite-x86-arm-3.7.13-2.1 [ 161s] [120/145] installing xz-libs-x86-arm-5.0.3-2.1 [ 161s] [121/145] installing zlib-x86-arm-1.2.5-2.1 [ 162s] [122/145] installing gcc-4.6.4-3.14 [ 163s] [123/145] installing rpm-build-4.9.1-4.1 [ 164s] [124/145] installing perl-CPAN-1.9205-3.3 [ 166s] [125/145] installing bash-x86-arm-4.1-2.1 [ 167s] [126/145] installing fdupes-x86-arm-1.40-2.1 [ 167s] [127/145] installing findutils-x86-arm-4.2.31-2.1 [ 170s] [128/145] installing gawk-x86-arm-3.1.5-2.2 [ 172s] [129/145] installing gzip-x86-arm-1.3.12-2.1 [ 173s] [130/145] installing make-x86-arm-3.82-2.1 [ 177s] [131/145] installing sed-x86-arm-4.1.5-2.1 [ 177s] [132/145] installing tar-x86-arm-1.17-2.2 [ 178s] [133/145] installing diffutils-x86-arm-3.0-2.1 [ 178s] [134/145] installing patch-x86-arm-2.6-2.1 [ 179s] [135/145] installing autoconf-2.68-3.1 [ 181s] [136/145] installing coreutils-x86-arm-6.9-2.1 [ 184s] [137/145] installing file-x86-arm-5.04-2.1 [ 184s] [138/145] installing elfutils-x86-arm-0.152-2.3 [ 184s] [139/145] installing gcc-c++-4.6.4-3.14 [ 185s] [140/145] installing rpm-x86-arm-4.9.1-2.2 [ 192s] /bin/rpm.orig-arm already present - skipping. [ 192s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 192s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 192s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 192s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 192s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 193s] [141/145] installing rpm-build-x86-arm-4.9.1-2.2 [ 193s] [142/145] installing automake-1.11.1-3.1 [ 193s] [143/145] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 196s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 196s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 196s] [144/145] installing libtool-2.2.6b-3.2 [ 196s] [145/145] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 197s] removing nis flags from //etc/nsswitch.conf... [ 197s] now finalizing build dir... [ 197s] /.build/build: line 2585: mount: command not found [ 197s] /.build/build: line 2586: mount: command not found [ 201s] build target is armv7l-tizen-linux [ 201s] ----------------------------------------------------------------- [ 201s] I have the following modifications for libmm-log.spec: [ 201s] 4c4 [ 201s] < Release: 17 [ 201s] --- [ 201s] > Release: 3.1 [ 202s] ----------------------------------------------------------------- [ 202s] ----- building libmm-log.spec (user abuild) [ 202s] ----------------------------------------------------------------- [ 202s] ----------------------------------------------------------------- [ 202s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/f8ddc40cc88e42632ecc0949d278f2b8-libmm-log' /home/abuild/rpmbuild/SOURCES/libmm-log.spec [ 202s] Building target platforms: armv7l-tizen-linux [ 202s] Building for target armv7l-tizen-linux [ 202s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.C9hVWM [ 202s] + umask 022 [ 202s] + cd /home/abuild/rpmbuild/BUILD [ 202s] + LANG=C [ 202s] + export LANG [ 202s] + unset DISPLAY [ 202s] + cd /home/abuild/rpmbuild/BUILD [ 202s] + rm -rf libmm-log-0.1.9 [ 202s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libmm-log-0.1.9.tar.gz [ 202s] + /bin/tar -xf - [ 202s] + STATUS=0 [ 202s] + '[' 0 -ne 0 ']' [ 202s] + cd libmm-log-0.1.9 [ 202s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 202s] + ./autogen.sh [ 217s] libtoolize: putting auxiliary files in `.'. [ 217s] libtoolize: copying file `./ltmain.sh' [ 217s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 217s] libtoolize: copying file `m4/libtool.m4' [ 217s] libtoolize: copying file `m4/ltoptions.m4' [ 217s] libtoolize: copying file `m4/ltsugar.m4' [ 217s] libtoolize: copying file `m4/ltversion.m4' [ 217s] libtoolize: copying file `m4/lt~obsolete.m4' [ 234s] configure.ac:22: installing `./config.guess' [ 234s] configure.ac:22: installing `./config.sub' [ 234s] configure.ac:4: installing `./install-sh' [ 234s] configure.ac:4: installing `./missing' [ 235s] + exit 0 [ 235s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.p4TlBV [ 235s] + umask 022 [ 235s] + cd /home/abuild/rpmbuild/BUILD [ 235s] + cd libmm-log-0.1.9 [ 235s] + LANG=C [ 235s] + export LANG [ 235s] + unset DISPLAY [ 235s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 235s] + export CFLAGS [ 235s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 235s] + export CXXFLAGS [ 235s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 235s] + export FFLAGS [ 235s] + LD_AS_NEEDED=1 [ 235s] + export LD_AS_NEEDED [ 235s] + export 'CFLAGS+= -DUSE_DLOG' [ 235s] + CFLAGS+=' -DUSE_DLOG' [ 235s] + export 'CFLAGS+= -DTIZEN_ENGINEER_MODE' [ 235s] + CFLAGS+=' -DTIZEN_ENGINEER_MODE' [ 235s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DUSE_DLOG -DTIZEN_ENGINEER_MODE' [ 235s] + export CFLAGS [ 235s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 235s] + export CXXFLAGS [ 235s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 235s] + export FFLAGS [ 235s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-engineer_mode --prefix=/usr --enable-dlog [ 235s] checking for a BSD-compatible install... /usr/bin/install -c [ 236s] checking whether build environment is sane... yes [ 236s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 236s] checking for gawk... gawk [ 236s] checking whether make sets $(MAKE)... yes [ 236s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 236s] checking for gcc... gcc [ 236s] checking whether the C compiler works... yes [ 236s] checking for C compiler default output file name... a.out [ 236s] checking for suffix of executables... [ 237s] checking whether we are cross compiling... no [ 237s] checking for suffix of object files... o [ 237s] checking whether we are using the GNU C compiler... yes [ 237s] checking whether gcc accepts -g... yes [ 237s] checking for gcc option to accept ISO C89... none needed [ 237s] checking for style of include used by make... GNU [ 237s] checking dependency style of gcc... none [ 237s] checking for an ANSI C-conforming const... yes [ 237s] checking how to run the C preprocessor... gcc -E [ 237s] checking for grep that handles long lines and -e... /bin/grep [ 237s] checking for egrep... /bin/grep -E [ 237s] checking for ANSI C header files... yes [ 237s] checking for sys/types.h... yes [ 237s] checking for sys/stat.h... yes [ 237s] checking for stdlib.h... yes [ 237s] checking for string.h... yes [ 237s] checking for memory.h... yes [ 237s] checking for strings.h... yes [ 237s] checking for inttypes.h... yes [ 237s] checking for stdint.h... yes [ 237s] checking for unistd.h... yes [ 237s] checking for stdlib.h... (cached) yes [ 237s] checking for unistd.h... (cached) yes [ 237s] checking for sys/param.h... yes [ 237s] checking for getpagesize... yes [ 237s] checking for working mmap... yes [ 237s] checking for stdlib.h... (cached) yes [ 237s] checking for GNU libc compatible realloc... yes [ 237s] checking sys/select.h usability... yes [ 237s] checking sys/select.h presence... yes [ 237s] checking for sys/select.h... yes [ 237s] checking sys/socket.h usability... yes [ 237s] checking sys/socket.h presence... yes [ 237s] checking for sys/socket.h... yes [ 237s] checking types of arguments for select... int,fd_set *,struct timeval * [ 238s] checking whether lstat correctly handles trailing slash... yes [ 238s] checking whether stat accepts an empty string... no [ 238s] checking for vprintf... yes [ 238s] checking for _doprnt... no [ 238s] checking for stdbool.h that conforms to C99... yes [ 238s] checking for _Bool... yes [ 238s] checking for ANSI C header files... (cached) yes [ 238s] checking whether time.h and sys/time.h may both be included... yes [ 238s] checking whether gcc needs -traditional... no [ 238s] checking build system type... armv7l-unknown-linux-gnueabi [ 238s] checking host system type... armv7l-unknown-linux-gnueabi [ 238s] checking for a sed that does not truncate output... /bin/sed [ 238s] checking for fgrep... /bin/grep -F [ 238s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 238s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 238s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 238s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 238s] checking whether ln -s works... yes [ 238s] checking the maximum length of command line arguments... 1572864 [ 238s] checking whether the shell understands some XSI constructs... yes [ 238s] checking whether the shell understands "+="... yes [ 238s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 238s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 238s] checking for objdump... objdump [ 238s] checking how to recognize dependent libraries... pass_all [ 238s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 238s] checking for ar... ar [ 238s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 238s] checking for strip... strip [ 238s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 238s] checking for ranlib... ranlib [ 238s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 238s] checking for dlfcn.h... yes [ 238s] checking for objdir... .libs [ 238s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 238s] checking for gcc option to produce PIC... -fPIC -DPIC [ 238s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 238s] checking if gcc static flag -static works... no [ 238s] checking if gcc supports -c -o file.o... yes [ 238s] checking if gcc supports -c -o file.o... (cached) yes [ 238s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 238s] checking whether -lc should be explicitly linked in... no [ 239s] checking dynamic linker characteristics... GNU/Linux ld.so [ 239s] checking how to hardcode library paths into programs... immediate [ 239s] checking whether stripping libraries is possible... yes [ 239s] checking if libtool supports shared libraries... yes [ 239s] checking whether to build shared libraries... yes [ 239s] checking whether to build static libraries... no [ 239s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 239s] checking for pkg-config... /usr/bin/pkg-config [ 239s] checking pkg-config is at least version 0.9.0... yes [ 239s] checking for DLOG... yes [ 239s] checking for ANSI C header files... (cached) yes [ 239s] checking fcntl.h usability... yes [ 239s] checking fcntl.h presence... yes [ 239s] checking for fcntl.h... yes [ 239s] checking for memory.h... (cached) yes [ 239s] checking for stdlib.h... (cached) yes [ 239s] checking for string.h... (cached) yes [ 239s] checking sys/time.h usability... yes [ 239s] checking sys/time.h presence... yes [ 239s] checking for sys/time.h... yes [ 239s] checking for unistd.h... (cached) yes [ 239s] checking for an ANSI C-conforming const... (cached) yes [ 239s] checking for pid_t... yes [ 239s] checking for size_t... yes [ 239s] checking for working alloca.h... yes [ 239s] checking for alloca... yes [ 239s] checking vfork.h usability... no [ 239s] checking vfork.h presence... no [ 239s] checking for vfork.h... no [ 239s] checking for fork... yes [ 239s] checking for vfork... yes [ 239s] checking for working fork... yes [ 239s] checking for working vfork... (cached) yes [ 239s] checking for stdlib.h... (cached) yes [ 239s] checking for GNU libc compatible malloc... yes [ 239s] checking for working memcmp... yes [ 239s] checking for sys/select.h... (cached) yes [ 239s] checking for sys/socket.h... (cached) yes [ 239s] checking types of arguments for select... (cached) int,fd_set *,struct timeval * [ 239s] checking return type of signal handlers... void [ 239s] checking for memset... yes [ 240s] checking for select... yes [ 240s] configure: creating ./config.status [ 240s] config.status: creating Makefile [ 240s] config.status: creating src/Makefile [ 240s] config.status: creating mm-log.pc [ 240s] config.status: creating logmessage.conf [ 240s] config.status: creating config.h [ 240s] config.status: executing depfiles commands [ 240s] config.status: executing libtool commands [ 240s] + make -j4 [ 240s] make all-recursive [ 240s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] Making all in src [ 240s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[2]: Nothing to be done for `all'. [ 240s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] + exit 0 [ 240s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.S48rQn [ 240s] + umask 022 [ 240s] + cd /home/abuild/rpmbuild/BUILD [ 240s] + cd libmm-log-0.1.9 [ 240s] + LANG=C [ 240s] + export LANG [ 240s] + unset DISPLAY [ 240s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 240s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 240s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 240s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm install [ 240s] Making install in src [ 240s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[2]: Nothing to be done for `install-exec-am'. [ 240s] test -z "/usr/include/mm_log" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/include/mm_log" [ 240s] /usr/bin/install -c -m 644 mm_log.h '/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/include/mm_log' [ 240s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9/src' [ 240s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] make[2]: Nothing to be done for `install-exec-am'. [ 240s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/lib/pkgconfig" [ 240s] /usr/bin/install -c -m 644 mm-log.pc '/home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/lib/pkgconfig' [ 240s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libmm-log-0.1.9' [ 240s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/share/info/dir [ 240s] + xargs rm -f -- [ 240s] + find /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm -regex '.*\.la$' [ 240s] + find /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm -regex '.*\.a$' [ 240s] + xargs rm -f -- [ 240s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/share/license [ 240s] + cp LICENSE.APLv2 /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm/usr/share/license/libmm-log [ 240s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libmm-log-0.1.9 [ 240s] + /usr/lib/rpm/check-buildroot [ 240s] + /usr/lib/rpm//brp-compress [ 240s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 240s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 240s] + /usr/lib/rpm/brp-python-hardlink [ 240s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 240s] Processing files: libmm-log-devel-0.1.9-3.1.armv7l [ 241s] Provides: pkgconfig(mm-log) = 0.1 [ 241s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 241s] Requires: /usr/bin/pkg-config pkgconfig(dlog) [ 241s] Processing files: libmm-log-debuginfo-0.1.9-3.1.armv7l [ 241s] Processing files: libmm-log-debugsource-0.1.9-3.1.armv7l [ 241s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 241s] Wrote: /home/abuild/rpmbuild/SRPMS/libmm-log-0.1.9-3.1.src.rpm [ 241s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-devel-0.1.9-3.1.armv7l.rpm [ 241s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-debuginfo-0.1.9-3.1.armv7l.rpm [ 241s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-debugsource-0.1.9-3.1.armv7l.rpm [ 241s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HIBxgM [ 241s] + umask 022 [ 241s] + cd /home/abuild/rpmbuild/BUILD [ 241s] + cd libmm-log-0.1.9 [ 241s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libmm-log-0.1.9-3.1.arm [ 241s] + exit 0 [ 241s] ... checking for files with abuild user/group [ 241s] ... creating baselibs [ 242s] ... saving built statistics [ 242s] /.build/build: line 3144: mount: command not found [ 242s] ERROR: no root disk device found, yet another new device name? [ 242s] ls: cannot access /sys/block/: No such file or directory [ 242s] /.build/build: line 3159: umount: command not found [ 242s] ... saving built packages [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-debuginfo-0.1.9-3.1.armv7l.rpm [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-debugsource-0.1.9-3.1.armv7l.rpm [ 242s] /home/abuild/rpmbuild/RPMS/armv7l/libmm-log-devel-0.1.9-3.1.armv7l.rpm [ 242s] /home/abuild/rpmbuild/SRPMS/libmm-log-0.1.9-3.1.src.rpm [ 242s] /home/abuild/rpmbuild/OTHER/_statistics [ 242s] [ 242s] w22 finished "build libmm-log.spec" at Wed Feb 4 12:41:51 UTC 2015. [ 242s] [ 243s] /.build/build: line 368: 224 Killed background_monitor_process [ 245s] [ 222.656661] SysRq : Power Off [ 245s] [ 222.664563] Power down. [ 245s] build: extracting built packages... [ 245s] libmm-log-debuginfo-0.1.9-3.1.armv7l.rpm [ 245s] libmm-log-debugsource-0.1.9-3.1.armv7l.rpm [ 245s] libmm-log-devel-0.1.9-3.1.armv7l.rpm [ 245s] libmm-log-0.1.9-3.1.src.rpm [ 245s] _statistics Retried build at Thu Feb 5 21:08:36 2015 returned same result, skipped