[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w23 started "build _service:gbs:libusb.spec" at Wed Feb 4 11:22:41 UTC 2015. [ 0s] [ 0s] Building libusb for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '24ad649ea0ac89c0ebc9b19b3f7073b1' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:libusb.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:libusb.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:libusb.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 19s] booting kvm ... [ 19s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 22s] doing fast boot [ 22s] Creating device nodes with udev [ 27s] Waiting for device /dev/vda to appear: ok [ 27s] fsck from util-linux 2.21.2 [ 27s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 27s] /dev/vda: clean, 4684/2392064 files, 237527/9568256 blocks [ 27s] fsck succeeded. Mounting root device read-write. [ 27s] Mounting root /dev/vda [ 27s] mount -o rw -t ext4 /dev/vda /root [ 28s] replacing /etc/mtab with symlink to /proc/self/mounts [ 28s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 31s] 2nd stage started in virtual machine [ 31s] machine type: armv7l [ 31s] switching personality to 8... [ 32s] 2nd stage started in virtual machine [ 32s] machine type: armv7l [ 32s] /.build/build: line 770: mount: command not found [ 33s] swapon on /dev/vdb [ 33s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 33s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 34s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 35s] logging output to //.build.log... [ 36s] processing specfile /.build-srcdir/_service:gbs:libusb.spec ... [ 38s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:libusb.spec build rpmlint-Factory ... [ 66s] running rpm-x86-arm postinstall script [ 68s] running rpm-libs-x86-arm postinstall script [ 68s] running tizen-accelerator postinstall script [ 71s] running bash-x86-arm postinstall script [ 71s] initializing rpm db... [ 79s] [1/139] installing cross-armv7l-platformfile-0.0.1-3.1 [ 80s] [2/139] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 82s] [3/139] installing tizen-release-2.2.0-3.1 [ 83s] [4/139] installing tzdata-2013h-3.1 [ 84s] [5/139] installing libgcc-4.6.4-3.14 [ 85s] [6/139] installing setup-0.1-3.1 [ 87s] [7/139] installing filesystem-0.1-3.1 [ 95s] warning: group lock does not exist - using root [ 95s] [8/139] installing eglibc-2.13-3.9 [ 100s] [9/139] installing libstdc++-4.6.4-3.14 [ 102s] [10/139] installing eglibc-common-2.13-3.9 [ 111s] [11/139] installing libstdc++-devel-4.6.4-3.14 [ 112s] [12/139] installing bash-4.1-3.1 [ 112s] [13/139] installing bzip2-libs-1.0.5-3.2 [ 114s] [14/139] installing cpio-2.8-3.1 [ 115s] [15/139] installing diffutils-3.0-3.1 [ 117s] [16/139] installing e2fsprogs-libs-1.41.9-1.53 [ 118s] [17/139] installing elfutils-libelf-0.152-3.8 [ 119s] [18/139] installing fdupes-1.40-3.1 [ 119s] [19/139] installing findutils-4.2.31-3.1 [ 120s] [20/139] installing gdbm-1.8.3-3.3 [ 120s] [21/139] installing libattr-2.4.44-3.4 [ 120s] [22/139] installing libgomp-4.6.4-3.14 [ 120s] [23/139] installing liblua-5.1.4-3.2 [ 121s] [24/139] installing libuuid-2.20.2-1.127 [ 121s] [25/139] installing lzo-2.03-3.3 [ 121s] [26/139] installing m4-1.4.14-3.1 [ 121s] [27/139] installing net-tools-1.60-3.1 [ 121s] [28/139] installing nspr-4.9-3.6 [ 122s] [29/139] installing nss-softokn-freebl-3.12.9-3.11 [ 122s] [30/139] installing patch-2.6-3.1 [ 123s] [31/139] installing pkg-config-0.25-2.2 [ 124s] [32/139] installing popt-1.16-3.2 [ 125s] [33/139] installing readline-5.2-3.2 [ 126s] [34/139] installing sed-4.1.5-3.1 [ 126s] [35/139] installing sqlite-3.7.13-3.2 [ 126s] [36/139] installing tar-1.17-3.2 [ 127s] [37/139] installing xz-libs-5.0.3-3.3 [ 127s] [38/139] installing zlib-1.2.5-3.8 [ 127s] [39/139] installing gmp-4.2.1-3.2 [ 127s] [40/139] installing libpcre-7.7-3.3 [ 128s] [41/139] installing ncurses-libs-5.7-3.2 [ 128s] [42/139] installing build-compare-2009.10.14-3.4 [ 128s] [43/139] installing qemu.x86_64-1.2-5.1 [ 133s] [44/139] installing eglibc-headers-2.13-3.9 [ 133s] [45/139] installing libcap-2.21-3.2 [ 133s] [46/139] installing unzip-6.0-3.4 [ 133s] [47/139] installing zlib-devel-1.2.5-3.8 [ 133s] [48/139] installing grep-2.5.1a-3.1 [ 134s] [49/139] installing libacl-2.2.49-3.2 [ 134s] [50/139] installing libfile-5.04-3.2 [ 135s] [51/139] installing lzo-minilzo-2.03-3.3 [ 135s] [52/139] installing make-3.82-3.2 [ 136s] [53/139] installing mpfr-3.0.0-3.2 [ 136s] [54/139] installing ncurses-5.7-3.2 [ 136s] [55/139] installing bzip2-1.0.5-3.2 [ 137s] [56/139] installing libblkid-2.20.2-1.127 [ 137s] [57/139] installing xz-5.0.3-3.3 [ 138s] [58/139] installing binutils-2.22-3.4 [ 138s] [59/139] installing elfutils-libs-0.152-3.8 [ 139s] [60/139] installing nss-3.12.9-3.11 [ 140s] [61/139] installing perl-5.12.1-3.2 [ 152s] [62/139] installing ncurses-base-5.7-3.2 [ 153s] [63/139] installing perl-HTML-Tagset-3.20-3.1 [ 153s] [64/139] installing perl-IO-Compress-Base-2.008-3.2 [ 154s] [65/139] installing perl-Module-Pluggable-3.60-3.2 [ 154s] [66/139] installing perl-Pod-Escapes-1.04-3.2 [ 154s] [67/139] installing perl-TimeDate-1.20-3.1 [ 154s] [68/139] installing eglibc-devel-2.13-3.9 [ 155s] [69/139] installing file-5.04-3.2 [ 155s] [70/139] installing lzo-devel-2.03-3.3 [ 155s] [71/139] installing perl-Compress-Raw-Zlib-2.008-3.2 [ 156s] [72/139] installing perl-devel-5.12.1-3.2 [ 156s] [73/139] installing perl-libs-5.12.1-3.2 [ 169s] [74/139] installing coreutils-6.9-3.3 [ 170s] [75/139] installing libmount-2.20.2-1.127 [ 170s] [76/139] installing mpc-0.9-3.2 [ 171s] [77/139] installing xz-lzma-compat-5.0.3-3.3 [ 171s] [78/139] installing elfutils-0.152-3.8 [ 171s] [79/139] installing nss-sysinit-3.12.9-3.11 [ 173s] [80/139] installing rpm-libs-4.9.1-4.1 [ 173s] [81/139] installing perl-ExtUtils-ParseXS-2.18-3.2 [ 173s] [82/139] installing perl-Pod-Simple-3.07-3.2 [ 174s] [83/139] installing perl-Test-Simple-0.80-3.2 [ 174s] [84/139] installing tizen-accelerator-1.0.1-3.1 [ 175s] [85/139] installing perl-IO-Compress-Zlib-2.008-3.2 [ 176s] [86/139] installing perl-Test-Harness-3.12-3.2 [ 176s] [87/139] installing gawk-3.1.5-3.2 [ 177s] [88/139] installing gzip-1.3.12-3.1 [ 177s] [89/139] installing build-2011.01.10a-3.1 [ 178s] [90/139] installing rpm-4.9.1-4.1 [ 179s] [91/139] installing cpp-4.6.4-3.14 [ 179s] [92/139] installing util-linux-2.20.2-1.127 [ 180s] [93/139] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 181s] [94/139] installing eglibc-x86-arm-2.13-2.3 [ 182s] [95/139] installing elfutils-libelf-x86-arm-0.152-2.1 [ 183s] [96/139] installing elfutils-libs-x86-arm-0.152-2.3 [ 184s] [97/139] installing gmp-x86-arm-4.2.1-2.1 [ 185s] [98/139] installing libacl-x86-arm-2.2.49-2.1 [ 186s] [99/139] installing libattr-x86-arm-2.4.44-2.1 [ 186s] [100/139] installing libcap-x86-arm-2.21-2.1 [ 187s] [101/139] installing libfile-x86-arm-5.04-2.2 [ 188s] [102/139] installing libgcc-x86-arm-4.6.4-2.1 [ 190s] [103/139] installing liblua-x86-arm-5.1.4-2.1 [ 190s] [104/139] installing mpc-x86-arm-0.9-2.1 [ 191s] [105/139] installing mpfr-x86-arm-3.0.0-2.1 [ 192s] [106/139] installing ncurses-libs-x86-arm-5.7-2.2 [ 192s] [107/139] installing nspr-x86-arm-4.9-2.3 [ 193s] [108/139] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 193s] [109/139] installing nss-x86-arm-3.12.9-2.3 [ 195s] [110/139] installing perl-ExtUtils-MakeMaker-6.36-3.2 [ 198s] [111/139] installing popt-x86-arm-1.16-2.1 [ 199s] [112/139] installing rpm-libs-x86-arm-4.9.1-2.2 [ 199s] [113/139] installing sqlite-x86-arm-3.7.13-2.1 [ 199s] [114/139] installing xz-libs-x86-arm-5.0.3-2.1 [ 199s] [115/139] installing zlib-x86-arm-1.2.5-2.1 [ 200s] [116/139] installing gcc-4.6.4-3.14 [ 201s] [117/139] installing rpm-build-4.9.1-4.1 [ 202s] [118/139] installing perl-CPAN-1.9205-3.2 [ 204s] [119/139] installing bash-x86-arm-4.1-2.1 [ 204s] [120/139] installing fdupes-x86-arm-1.40-2.1 [ 205s] [121/139] installing findutils-x86-arm-4.2.31-2.1 [ 205s] [122/139] installing gawk-x86-arm-3.1.5-2.2 [ 205s] [123/139] installing gzip-x86-arm-1.3.12-2.1 [ 206s] [124/139] installing make-x86-arm-3.82-2.1 [ 209s] [125/139] installing sed-x86-arm-4.1.5-2.1 [ 209s] [126/139] installing tar-x86-arm-1.17-2.2 [ 210s] [127/139] installing diffutils-x86-arm-3.0-2.1 [ 210s] [128/139] installing patch-x86-arm-2.6-2.1 [ 210s] [129/139] installing autoconf-2.68-3.1 [ 211s] [130/139] installing coreutils-x86-arm-6.9-2.1 [ 213s] [131/139] installing file-x86-arm-5.04-2.1 [ 214s] [132/139] installing elfutils-x86-arm-0.152-2.3 [ 214s] [133/139] installing gcc-c++-4.6.4-3.14 [ 215s] [134/139] installing rpm-x86-arm-4.9.1-2.2 [ 218s] /bin/rpm.orig-arm already present - skipping. [ 218s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 218s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 218s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 218s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 218s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 218s] [135/139] installing rpm-build-x86-arm-4.9.1-2.2 [ 218s] [136/139] installing automake-1.11.1-3.1 [ 219s] [137/139] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 227s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 227s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 227s] [138/139] installing libtool-2.2.6b-3.2 [ 227s] [139/139] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 228s] removing nis flags from //etc/nsswitch.conf... [ 228s] now finalizing build dir... [ 229s] /.build/build: line 2585: mount: command not found [ 229s] /.build/build: line 2586: mount: command not found [ 234s] build target is armv7l-tizen-linux [ 234s] ----------------------------------------------------------------- [ 234s] I have the following modifications for libusb.spec: [ 234s] 5c5 [ 234s] < Release: 15 [ 234s] --- [ 234s] > Release: 3.2 [ 234s] ----------------------------------------------------------------- [ 234s] ----- building libusb.spec (user abuild) [ 234s] ----------------------------------------------------------------- [ 234s] ----------------------------------------------------------------- [ 234s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/24ad649ea0ac89c0ebc9b19b3f7073b1-libusb' /home/abuild/rpmbuild/SOURCES/libusb.spec [ 234s] Building target platforms: armv7l-tizen-linux [ 234s] Building for target armv7l-tizen-linux [ 234s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tRrNl8 [ 234s] + umask 022 [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + LANG=C [ 234s] + export LANG [ 234s] + unset DISPLAY [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + rm -rf libusb-1.0.9 [ 234s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libusb-1.0.9.tar.gz [ 234s] + /bin/tar -xf - [ 234s] + STATUS=0 [ 234s] + '[' 0 -ne 0 ']' [ 234s] + cd libusb-1.0.9 [ 234s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 234s] + exit 0 [ 234s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Sp5I2e [ 234s] + umask 022 [ 234s] + cd /home/abuild/rpmbuild/BUILD [ 234s] + cd libusb-1.0.9 [ 234s] + LANG=C [ 234s] + export LANG [ 234s] + unset DISPLAY [ 234s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 234s] + export CFLAGS [ 234s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 234s] + export CXXFLAGS [ 234s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 234s] + export FFLAGS [ 234s] + LD_AS_NEEDED=1 [ 234s] + export LD_AS_NEEDED [ 234s] + cp /home/abuild/rpmbuild/SOURCES/libusb.manifest . [ 234s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 234s] + export CFLAGS [ 234s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 234s] + export CXXFLAGS [ 234s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 234s] + export FFLAGS [ 234s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --disable-build-docs [ 234s] configure: WARNING: unrecognized options: --disable-build-docs [ 234s] checking for a BSD-compatible install... /usr/bin/install -c [ 235s] checking whether build environment is sane... yes [ 235s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 235s] checking for gawk... gawk [ 235s] checking whether make sets $(MAKE)... yes [ 235s] checking whether to enable maintainer-specific portions of Makefiles... no [ 235s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 235s] checking for gcc... gcc [ 236s] checking whether the C compiler works... yes [ 236s] checking for C compiler default output file name... a.out [ 236s] checking for suffix of executables... [ 236s] checking whether we are cross compiling... no [ 236s] checking for suffix of object files... o [ 236s] checking whether we are using the GNU C compiler... yes [ 236s] checking whether gcc accepts -g... yes [ 236s] checking for gcc option to accept ISO C89... none needed [ 236s] checking for style of include used by make... GNU [ 236s] checking dependency style of gcc... gcc3 [ 236s] checking build system type... armv7l-unknown-linux-gnueabi [ 236s] checking host system type... armv7l-unknown-linux-gnueabi [ 236s] checking how to print strings... printf [ 236s] checking for a sed that does not truncate output... /bin/sed [ 236s] checking for grep that handles long lines and -e... /bin/grep [ 236s] checking for egrep... /bin/grep -E [ 236s] checking for fgrep... /bin/grep -F [ 236s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 236s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 236s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 236s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 236s] checking whether ln -s works... yes [ 236s] checking the maximum length of command line arguments... 1572864 [ 236s] checking whether the shell understands some XSI constructs... yes [ 236s] checking whether the shell understands "+="... yes [ 236s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 236s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 236s] checking for objdump... objdump [ 236s] checking how to recognize dependent libraries... pass_all [ 236s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 236s] checking for ar... ar [ 236s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 236s] checking for strip... strip [ 236s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 236s] checking for ranlib... ranlib [ 236s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 236s] checking how to run the C preprocessor... gcc -E [ 236s] checking for ANSI C header files... yes [ 236s] checking for sys/types.h... yes [ 236s] checking for sys/stat.h... yes [ 236s] checking for stdlib.h... yes [ 236s] checking for string.h... yes [ 236s] checking for memory.h... yes [ 236s] checking for strings.h... yes [ 237s] checking for inttypes.h... yes [ 237s] checking for stdint.h... yes [ 237s] checking for unistd.h... yes [ 237s] checking for dlfcn.h... yes [ 237s] checking for objdir... .libs [ 237s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 237s] checking for gcc option to produce PIC... -fPIC -DPIC [ 237s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 237s] checking if gcc static flag -static works... no [ 237s] checking if gcc supports -c -o file.o... yes [ 237s] checking if gcc supports -c -o file.o... (cached) yes [ 237s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 237s] checking whether -lc should be explicitly linked in... no [ 237s] checking dynamic linker characteristics... GNU/Linux ld.so [ 237s] checking how to hardcode library paths into programs... immediate [ 237s] checking whether stripping libraries is possible... yes [ 237s] checking if libtool supports shared libraries... yes [ 237s] checking whether to build shared libraries... yes [ 237s] checking whether to build static libraries... no [ 237s] checking for armv7l-unknown-linux-gnueabi-windres... no [ 237s] checking for windres... no [ 237s] checking for inline... inline [ 237s] checking whether gcc and cc understand -c and -o together... yes [ 237s] checking operating system... Linux [ 237s] checking for clock_gettime in -lrt... yes [ 237s] checking poll.h usability... yes [ 237s] checking poll.h presence... yes [ 237s] checking for poll.h... yes [ 237s] checking sys/timerfd.h usability... yes [ 237s] checking sys/timerfd.h presence... yes [ 237s] checking for sys/timerfd.h... yes [ 237s] checking whether TFD_NONBLOCK is declared... yes [ 237s] checking whether to use timerfd for timing... yes [ 237s] checking for struct timespec... yes [ 237s] checking for sigaction... yes [ 237s] checking sys/time.h usability... yes [ 237s] checking sys/time.h presence... yes [ 237s] checking for sys/time.h... yes [ 237s] checking for gettimeofday... yes [ 237s] configure: creating ./config.status [ 238s] config.status: creating libusb-1.0.pc [ 238s] config.status: creating Makefile [ 238s] config.status: creating libusb/Makefile [ 238s] config.status: creating examples/Makefile [ 238s] config.status: creating doc/Makefile [ 238s] config.status: creating doc/doxygen.cfg [ 238s] config.status: creating config.h [ 238s] config.status: executing depfiles commands [ 238s] config.status: executing libtool commands [ 238s] configure: WARNING: unrecognized options: --disable-build-docs [ 238s] + make -j4 [ 238s] make all-recursive [ 238s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 238s] Making all in libusb [ 238s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 238s] CC libusb_1_0_la-core.lo [ 238s] CC libusb_1_0_la-descriptor.lo [ 238s] CC libusb_1_0_la-io.lo [ 238s] CC libusb_1_0_la-sync.lo [ 238s] CC libusb_1_0_la-linux_usbfs.lo [ 238s] CC libusb_1_0_la-threads_posix.lo [ 239s] CCLD libusb-1.0.la [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 239s] Making all in doc [ 239s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[2]: Nothing to be done for `all'. [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] + exit 0 [ 239s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.kwqUoD [ 239s] + umask 022 [ 239s] + cd /home/abuild/rpmbuild/BUILD [ 239s] + cd libusb-1.0.9 [ 239s] + LANG=C [ 239s] + export LANG [ 239s] + unset DISPLAY [ 239s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 239s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 239s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 239s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm install [ 239s] Making install in libusb [ 239s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 239s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 239s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib" [ 239s] /bin/sh ../libtool --mode=install /usr/bin/install -c libusb-1.0.la '/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib' [ 239s] libtool: install: /usr/bin/install -c .libs/libusb-1.0.so.0.1.0 /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.so.0.1.0 [ 239s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib && { ln -s -f libusb-1.0.so.0.1.0 libusb-1.0.so.0 || { rm -f libusb-1.0.so.0 && ln -s libusb-1.0.so.0.1.0 libusb-1.0.so.0; }; }) [ 239s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib && { ln -s -f libusb-1.0.so.0.1.0 libusb-1.0.so || { rm -f libusb-1.0.so && ln -s libusb-1.0.so.0.1.0 libusb-1.0.so; }; }) [ 239s] libtool: install: /usr/bin/install -c .libs/libusb-1.0.lai /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.la [ 239s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 239s] test -z "/usr/include/libusb-1.0" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/include/libusb-1.0" [ 239s] /usr/bin/install -c -m 644 libusb.h '/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/include/libusb-1.0' [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 239s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/libusb' [ 239s] Making install in doc [ 239s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[2]: Nothing to be done for `install-exec-am'. [ 239s] make[2]: Nothing to be done for `install-data-am'. [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9/doc' [ 239s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] make[2]: Nothing to be done for `install-exec-am'. [ 239s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/pkgconfig" [ 239s] /usr/bin/install -c -m 644 libusb-1.0.pc '/home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/pkgconfig' [ 239s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/libusb-1.0.9' [ 239s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/share/info/dir [ 239s] + find /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm -regex '.*\.la$' [ 239s] + xargs rm -f -- [ 239s] + find /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm -regex '.*\.a$' [ 239s] + xargs rm -f -- [ 239s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/lib/ [ 239s] + mv /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.so.0 /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.so.0.1.0 /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/lib/ [ 239s] + ln -sf /lib/libusb-1.0.so.0 /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.so.0 [ 239s] + ln -sf /lib/libusb-1.0.so.0.1.0 /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/lib/libusb-1.0.so [ 239s] + install -D -m 0644 COPYING /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/usr/share/license/libusb [ 239s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/libusb-1.0.9 [ 239s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm/lib/libusb-1.0.so.0.1.0 [ 239s] symlinked /usr/lib/debug/lib/libusb-1.0.so.0.1.0.debug to /usr/lib/debug/usr/lib/libusb-1.0.so.debug [ 239s] symlinked /usr/lib/debug/lib/libusb-1.0.so.0.1.0.debug to /usr/lib/debug/lib/libusb-1.0.so.0.debug [ 239s] 676 blocks [ 239s] + /usr/lib/rpm/check-buildroot [ 239s] + /usr/lib/rpm//brp-compress [ 239s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 239s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 239s] + /usr/lib/rpm/brp-python-hardlink [ 239s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 239s] Processing files: libusb-1.0.9-3.2.armv7l [ 239s] Provides: libusb-1.0.so.0 [ 239s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 239s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 239s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 239s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 239s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 librt.so.1(GLIBC_2.4) [ 239s] Processing files: libusb-devel-1.0.9-3.2.armv7l [ 239s] Aptk: PG1hbmlmZXN0Pgo8cmVxdWVzdD4KCTxkb21haW4gbmFtZT0iXyIvPgo8L3JlcXVl [ 239s] c3Q+CjwvbWFuaWZlc3Q+Cg== [ 239s] [ 240s] Provides: pkgconfig(libusb-1.0) = 1.0.9 [ 240s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 240s] Requires: /usr/bin/pkg-config [ 240s] Processing files: libusb-debuginfo-1.0.9-3.2.armv7l [ 240s] Processing files: libusb-debugsource-1.0.9-3.2.armv7l [ 240s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 240s] Wrote: /home/abuild/rpmbuild/SRPMS/libusb-1.0.9-3.2.src.rpm [ 240s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libusb-1.0.9-3.2.armv7l.rpm [ 240s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libusb-devel-1.0.9-3.2.armv7l.rpm [ 240s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libusb-debuginfo-1.0.9-3.2.armv7l.rpm [ 240s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libusb-debugsource-1.0.9-3.2.armv7l.rpm [ 240s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.RBiMmi [ 240s] + umask 022 [ 240s] + cd /home/abuild/rpmbuild/BUILD [ 240s] + cd libusb-1.0.9 [ 240s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libusb-1.0.9-3.2.arm [ 240s] + exit 0 [ 240s] ... checking for files with abuild user/group [ 240s] ... creating baselibs [ 241s] ... comparing built packages with the former built [ 241s] /usr/lib/build/rpm-check.sh [ 241s] compare /.build.oldpackages/libusb-1.0.9-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/libusb-1.0.9-3.2.src.rpm [ 242s] compare /.build.oldpackages/libusb-1.0.9-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libusb-1.0.9-3.2.armv7l.rpm [ 242s] compare /.build.oldpackages/libusb-debuginfo-1.0.9-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libusb-debuginfo-1.0.9-3.2.armv7l.rpm [ 242s] --- /tmp/tmp.2PmUZ8wI4K 2015-02-04 11:26:43.447344367 +0000 [ 242s] +++ /tmp/tmp.PWS94emK6o 2015-02-04 11:26:43.455344367 +0000 [ 242s] @@ -8,6 +8,5 @@ [ 242s] /usr/lib/debug/lib/libusb-1.0.so.0.debug 0 (none) 120777 root root 0 4294967295 libusb-1.0.so.0.1.0.debug [ 242s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 242s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 242s] -/usr/lib/debug/usr/lib/libusb-1.0.so.0.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libusb-1.0.so.0.debug [ 242s] /usr/lib/debug/usr/lib/libusb-1.0.so.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libusb-1.0.so.0.1.0.debug [ 242s] [ 242s] RPM meta information is different [ 242s] compare /.build.oldpackages/libusb-debugsource-1.0.9-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libusb-debugsource-1.0.9-3.2.armv7l.rpm [ 242s] compare /.build.oldpackages/libusb-devel-1.0.9-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libusb-devel-1.0.9-3.2.armv7l.rpm [ 242s] ... saving built statistics [ 242s] /.build/build: line 3144: mount: command not found [ 242s] ERROR: no root disk device found, yet another new device name? [ 242s] ls: cannot access /sys/block/: No such file or directory [ 242s] /.build/build: line 3159: umount: command not found [ 242s] ... saving built packages [ 243s] /home/abuild/rpmbuild/RPMS/armv7l/libusb-1.0.9-3.2.armv7l.rpm [ 243s] /home/abuild/rpmbuild/RPMS/armv7l/libusb-debuginfo-1.0.9-3.2.armv7l.rpm [ 243s] /home/abuild/rpmbuild/RPMS/armv7l/libusb-debugsource-1.0.9-3.2.armv7l.rpm [ 243s] /home/abuild/rpmbuild/RPMS/armv7l/libusb-devel-1.0.9-3.2.armv7l.rpm [ 243s] /home/abuild/rpmbuild/SRPMS/libusb-1.0.9-3.2.src.rpm [ 243s] /home/abuild/rpmbuild/OTHER/_statistics [ 243s] [ 243s] w23 finished "build libusb.spec" at Wed Feb 4 11:26:44 UTC 2015. [ 243s] [ 246s] [ 224.439097] SysRq : Power Off [ 246s] [ 224.548320] Power down. [ 246s] build: extracting built packages... [ 246s] libusb-1.0.9-3.2.armv7l.rpm [ 246s] libusb-debuginfo-1.0.9-3.2.armv7l.rpm [ 246s] libusb-debugsource-1.0.9-3.2.armv7l.rpm [ 246s] libusb-devel-1.0.9-3.2.armv7l.rpm [ 246s] libusb-1.0.9-3.2.src.rpm [ 246s] _statistics