[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w09 started "build _service:gbs:pixman.spec" at Wed Feb 4 08:16:55 UTC 2015. [ 0s] [ 0s] Building pixman for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'b46861e5f6c1871658d9763c81ffe835' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:pixman.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:pixman.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:pixman.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 7s] booting kvm ... [ 7s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 10s] [ 0.000000] tsc: Fast TSC calibration failed [ 11s] doing fast boot [ 11s] Creating device nodes with udev [ 14s] Waiting for device /dev/vda to appear: ok [ 14s] fsck from util-linux 2.21.2 [ 14s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 14s] /dev/vda: clean, 4685/2392064 files, 237381/9568256 blocks [ 14s] fsck succeeded. Mounting root device read-write. [ 14s] Mounting root /dev/vda [ 14s] mount -o rw -t ext4 /dev/vda /root [ 14s] replacing /etc/mtab with symlink to /proc/self/mounts [ 14s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 15s] 2nd stage started in virtual machine [ 15s] machine type: armv7l [ 15s] switching personality to 8... [ 15s] 2nd stage started in virtual machine [ 15s] machine type: armv7l [ 15s] /.build/build: line 770: mount: command not found [ 15s] swapon on /dev/vdb [ 15s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 15s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 15s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 15s] logging output to //.build.log... [ 16s] processing specfile /.build-srcdir/_service:gbs:pixman.spec ... [ 16s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:pixman.spec build rpmlint-Factory ... [ 16s] running rpm-x86-arm postinstall script [ 16s] running rpm-libs-x86-arm postinstall script [ 16s] running tizen-accelerator postinstall script [ 17s] running bash-x86-arm postinstall script [ 17s] initializing rpm db... [ 27s] [1/141] installing cross-armv7l-platformfile-0.0.1-3.1 [ 28s] [2/141] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 29s] [3/141] installing tizen-release-2.2.0-3.1 [ 30s] [4/141] installing tzdata-2013h-1.134 [ 33s] [5/141] installing libgcc-4.6.4-3.11 [ 38s] [6/141] installing setup-0.1-3.1 [ 41s] [7/141] installing filesystem-0.1-3.1 [ 58s] warning: group lock does not exist - using root [ 58s] [8/141] installing eglibc-2.13-3.8 [ 64s] [9/141] installing libstdc++-4.6.4-3.11 [ 69s] [10/141] installing eglibc-common-2.13-3.8 [ 74s] [11/141] installing libstdc++-devel-4.6.4-3.11 [ 74s] [12/141] installing bash-4.1-1.19 [ 75s] [13/141] installing bzip2-libs-1.0.5-3.2 [ 75s] [14/141] installing cpio-2.8-1.135 [ 75s] [15/141] installing diffutils-3.0-1.17 [ 75s] [16/141] installing e2fsprogs-libs-1.41.9-1.53 [ 76s] [17/141] installing elfutils-libelf-0.152-3.7 [ 77s] [18/141] installing fdupes-1.40-3.1 [ 77s] [19/141] installing findutils-4.2.31-2.134 [ 79s] [20/141] installing gdbm-1.8.3-3.3 [ 80s] [21/141] installing libattr-2.4.44-3.3 [ 80s] [22/141] installing libgomp-4.6.4-3.11 [ 80s] [23/141] installing liblua-5.1.4-3.2 [ 96s] [24/141] installing libuuid-2.20.2-1.127 [ 97s] [25/141] installing lzo-2.03-3.3 [ 97s] [26/141] installing m4-1.4.14-1.20 [ 99s] [27/141] installing net-tools-1.60-2.134 [ 99s] [28/141] installing nspr-4.9-3.5 [ 100s] [29/141] installing nss-softokn-freebl-3.12.9-3.9 [ 100s] [30/141] installing patch-2.6-1.136 [ 101s] [31/141] installing pkg-config-0.25-2.2 [ 102s] [32/141] installing popt-1.16-3.2 [ 102s] [33/141] installing readline-5.2-3.2 [ 102s] [34/141] installing sed-4.1.5-3.1 [ 102s] [35/141] installing sqlite-3.7.13-3.2 [ 103s] [36/141] installing tar-1.17-3.2 [ 104s] [37/141] installing xz-libs-5.0.3-3.3 [ 104s] [38/141] installing zlib-1.2.5-3.7 [ 104s] [39/141] installing gmp-4.2.1-3.2 [ 104s] [40/141] installing libpcre-7.7-3.3 [ 104s] [41/141] installing ncurses-libs-5.7-3.2 [ 104s] [42/141] installing build-compare-2009.10.14-3.3 [ 105s] [43/141] installing qemu.x86_64-1.2-5.1 [ 109s] [44/141] installing eglibc-headers-2.13-3.8 [ 110s] [45/141] installing libcap-2.21-3.2 [ 111s] [46/141] installing unzip-6.0-3.4 [ 111s] [47/141] installing zlib-devel-1.2.5-3.7 [ 112s] [48/141] installing grep-2.5.1a-1.17 [ 112s] [49/141] installing libacl-2.2.49-3.2 [ 113s] [50/141] installing libfile-5.04-3.2 [ 113s] [51/141] installing libpng-1.2.50-3.1 [ 113s] [52/141] installing lzo-minilzo-2.03-3.3 [ 113s] [53/141] installing make-3.82-3.2 [ 114s] [54/141] installing mpfr-3.0.0-3.2 [ 115s] [55/141] installing ncurses-5.7-3.2 [ 115s] [56/141] installing bzip2-1.0.5-3.2 [ 116s] [57/141] installing libblkid-2.20.2-1.127 [ 116s] [58/141] installing xz-5.0.3-3.3 [ 116s] [59/141] installing binutils-2.22-3.4 [ 117s] [60/141] installing elfutils-libs-0.152-3.7 [ 118s] [61/141] installing nss-3.12.9-3.9 [ 120s] [62/141] installing perl-5.12.1-3.1 [ 131s] [63/141] installing ncurses-base-5.7-3.2 [ 131s] [64/141] installing perl-HTML-Tagset-3.20-3.1 [ 131s] [65/141] installing perl-IO-Compress-Base-2.008-3.1 [ 131s] [66/141] installing perl-Module-Pluggable-3.60-3.1 [ 131s] [67/141] installing perl-Pod-Escapes-1.04-3.1 [ 131s] [68/141] installing perl-TimeDate-1.20-3.1 [ 131s] [69/141] installing eglibc-devel-2.13-3.8 [ 132s] [70/141] installing file-5.04-3.2 [ 132s] [71/141] installing lzo-devel-2.03-3.3 [ 132s] [72/141] installing perl-Compress-Raw-Zlib-2.008-3.1 [ 132s] [73/141] installing perl-devel-5.12.1-3.1 [ 132s] [74/141] installing perl-libs-5.12.1-3.1 [ 133s] [75/141] installing coreutils-6.9-3.3 [ 133s] [76/141] installing libmount-2.20.2-1.127 [ 133s] [77/141] installing libpng-devel-1.2.50-3.1 [ 134s] [78/141] installing mpc-0.9-3.2 [ 134s] [79/141] installing xz-lzma-compat-5.0.3-3.3 [ 134s] [80/141] installing elfutils-0.152-3.7 [ 134s] [81/141] installing nss-sysinit-3.12.9-3.9 [ 135s] [82/141] installing rpm-libs-4.9.1-4.1 [ 136s] [83/141] installing perl-ExtUtils-ParseXS-2.18-3.1 [ 136s] [84/141] installing perl-Pod-Simple-3.07-3.1 [ 137s] [85/141] installing perl-Test-Simple-0.80-3.1 [ 138s] [86/141] installing tizen-accelerator-1.0.1-3.1 [ 138s] [87/141] installing perl-IO-Compress-Zlib-2.008-3.1 [ 139s] [88/141] installing perl-Test-Harness-3.12-3.1 [ 140s] [89/141] installing gawk-3.1.5-3.1 [ 140s] [90/141] installing gzip-1.3.12-1.13 [ 141s] [91/141] installing build-2011.01.10a-3.1 [ 141s] [92/141] installing rpm-4.9.1-4.1 [ 141s] [93/141] installing cpp-4.6.4-3.11 [ 142s] [94/141] installing util-linux-2.20.2-1.127 [ 143s] [95/141] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 143s] [96/141] installing eglibc-x86-arm-2.13-2.3 [ 145s] [97/141] installing elfutils-libelf-x86-arm-0.152-2.1 [ 146s] [98/141] installing elfutils-libs-x86-arm-0.152-2.3 [ 146s] [99/141] installing gmp-x86-arm-4.2.1-2.1 [ 147s] [100/141] installing libacl-x86-arm-2.2.49-2.1 [ 147s] [101/141] installing libattr-x86-arm-2.4.44-2.1 [ 148s] [102/141] installing libcap-x86-arm-2.21-2.1 [ 149s] [103/141] installing libfile-x86-arm-5.04-2.2 [ 149s] [104/141] installing libgcc-x86-arm-4.6.4-2.1 [ 149s] [105/141] installing liblua-x86-arm-5.1.4-2.1 [ 149s] [106/141] installing mpc-x86-arm-0.9-2.1 [ 150s] [107/141] installing mpfr-x86-arm-3.0.0-2.1 [ 150s] [108/141] installing ncurses-libs-x86-arm-5.7-2.2 [ 150s] [109/141] installing nspr-x86-arm-4.9-2.3 [ 151s] [110/141] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 151s] [111/141] installing nss-x86-arm-3.12.9-2.3 [ 151s] [112/141] installing perl-ExtUtils-MakeMaker-6.36-3.1 [ 152s] [113/141] installing popt-x86-arm-1.16-2.1 [ 152s] [114/141] installing rpm-libs-x86-arm-4.9.1-2.2 [ 152s] [115/141] installing sqlite-x86-arm-3.7.13-2.1 [ 153s] [116/141] installing xz-libs-x86-arm-5.0.3-2.1 [ 153s] [117/141] installing zlib-x86-arm-1.2.5-2.1 [ 153s] [118/141] installing gcc-4.6.4-3.11 [ 155s] [119/141] installing rpm-build-4.9.1-4.1 [ 155s] [120/141] installing perl-CPAN-1.9205-3.1 [ 156s] [121/141] installing bash-x86-arm-4.1-2.1 [ 157s] [122/141] installing fdupes-x86-arm-1.40-2.1 [ 157s] [123/141] installing findutils-x86-arm-4.2.31-2.1 [ 157s] [124/141] installing gawk-x86-arm-3.1.5-2.2 [ 158s] [125/141] installing gzip-x86-arm-1.3.12-2.1 [ 158s] [126/141] installing make-x86-arm-3.82-2.1 [ 160s] [127/141] installing sed-x86-arm-4.1.5-2.1 [ 160s] [128/141] installing tar-x86-arm-1.17-2.2 [ 161s] [129/141] installing diffutils-x86-arm-3.0-2.1 [ 161s] [130/141] installing patch-x86-arm-2.6-2.1 [ 162s] [131/141] installing autoconf-2.68-3.1 [ 162s] [132/141] installing coreutils-x86-arm-6.9-2.1 [ 164s] [133/141] installing file-x86-arm-5.04-2.1 [ 164s] [134/141] installing elfutils-x86-arm-0.152-2.3 [ 165s] [135/141] installing gcc-c++-4.6.4-3.11 [ 165s] [136/141] installing rpm-x86-arm-4.9.1-2.2 [ 167s] /bin/rpm.orig-arm already present - skipping. [ 167s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 167s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 167s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 167s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 167s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 167s] [137/141] installing rpm-build-x86-arm-4.9.1-2.2 [ 168s] [138/141] installing automake-1.11.1-3.1 [ 168s] [139/141] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.3 [ 171s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 171s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 172s] [140/141] installing libtool-2.2.6b-3.2 [ 172s] [141/141] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 173s] removing nis flags from //etc/nsswitch.conf... [ 173s] now finalizing build dir... [ 173s] /.build/build: line 2585: mount: command not found [ 173s] /.build/build: line 2586: mount: command not found [ 179s] build target is armv7l-tizen-linux [ 179s] ----------------------------------------------------------------- [ 179s] I have the following modifications for pixman.spec: [ 179s] 7c7 [ 179s] < Release: 2 [ 179s] --- [ 179s] > Release: 3.1 [ 179s] ----------------------------------------------------------------- [ 179s] ----- building pixman.spec (user abuild) [ 179s] ----------------------------------------------------------------- [ 179s] ----------------------------------------------------------------- [ 180s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/b46861e5f6c1871658d9763c81ffe835-pixman' /home/abuild/rpmbuild/SOURCES/pixman.spec [ 180s] Building target platforms: armv7l-tizen-linux [ 180s] Building for target armv7l-tizen-linux [ 180s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Tu5IgZ [ 180s] + umask 022 [ 180s] + cd /home/abuild/rpmbuild/BUILD [ 180s] + LANG=C [ 180s] + export LANG [ 180s] + unset DISPLAY [ 180s] + cd /home/abuild/rpmbuild/BUILD [ 180s] + rm -rf pixman-0.28.2 [ 180s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pixman-0.28.2.tar.gz [ 180s] + /bin/tar -xf - [ 180s] + STATUS=0 [ 180s] + '[' 0 -ne 0 ']' [ 180s] + cd pixman-0.28.2 [ 180s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 180s] + exit 0 [ 180s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.A808et [ 180s] + umask 022 [ 180s] + cd /home/abuild/rpmbuild/BUILD [ 180s] + cd pixman-0.28.2 [ 180s] + LANG=C [ 180s] + export LANG [ 180s] + unset DISPLAY [ 180s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 180s] + export CFLAGS [ 180s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 180s] + export CXXFLAGS [ 180s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 180s] + export FFLAGS [ 180s] + LD_AS_NEEDED=1 [ 180s] + export LD_AS_NEEDED [ 180s] + export 'GC_SECTIONS_FLAGS=-fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + GC_SECTIONS_FLAGS='-fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + export 'CFLAGS+= -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + CFLAGS+=' -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + export 'CXXFLAGS+= -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + CXXFLAGS+=' -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + export CFLAGS [ 180s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -fdata-sections -ffunction-sections -Wl,--gc-sections' [ 180s] + export CXXFLAGS [ 180s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 180s] + export FFLAGS [ 180s] + autoreconf -v --install --force [ 184s] autoreconf: Entering directory `.' [ 184s] autoreconf: configure.ac: not using Gettext [ 185s] autoreconf: running: aclocal --force [ 202s] autoreconf: configure.ac: tracing [ 209s] autoreconf: running: libtoolize --copy --force [ 209s] libtoolize: putting auxiliary files in `.'. [ 209s] libtoolize: copying file `./ltmain.sh' [ 209s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 209s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 209s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 222s] autoreconf: running: /usr/bin/autoconf --force [ 233s] autoreconf: running: /usr/bin/autoheader --force [ 242s] autoreconf: running: automake --add-missing --copy --force-missing [ 249s] configure.ac:69: installing `./config.guess' [ 249s] configure.ac:69: installing `./config.sub' [ 249s] configure.ac:62: installing `./install-sh' [ 249s] configure.ac:62: installing `./missing' [ 250s] demos/Makefile.am: installing `./depcomp' [ 255s] autoreconf: Leaving directory `.' [ 255s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-arm-iwmmxt [ 255s] checking for a BSD-compatible install... /usr/bin/install -c [ 256s] checking whether build environment is sane... yes [ 256s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 256s] checking for gawk... gawk [ 256s] checking whether make sets $(MAKE)... yes [ 256s] checking build system type... armv7l-unknown-linux-gnueabi [ 256s] checking host system type... armv7l-unknown-linux-gnueabi [ 256s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 256s] checking for gcc... gcc [ 257s] checking whether the C compiler works... yes [ 257s] checking for C compiler default output file name... a.out [ 257s] checking for suffix of executables... [ 257s] checking whether we are cross compiling... no [ 257s] checking for suffix of object files... o [ 257s] checking whether we are using the GNU C compiler... yes [ 257s] checking whether gcc accepts -g... yes [ 257s] checking for gcc option to accept ISO C89... none needed [ 257s] checking for style of include used by make... GNU [ 257s] checking dependency style of gcc... gcc3 [ 257s] checking dependency style of gcc... gcc3 [ 257s] checking for a sed that does not truncate output... /bin/sed [ 257s] checking for grep that handles long lines and -e... /bin/grep [ 257s] checking for egrep... /bin/grep -E [ 257s] checking for fgrep... /bin/grep -F [ 257s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 257s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 257s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 257s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 257s] checking whether ln -s works... yes [ 257s] checking the maximum length of command line arguments... 1572864 [ 257s] checking whether the shell understands some XSI constructs... yes [ 257s] checking whether the shell understands "+="... yes [ 257s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 257s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 257s] checking for objdump... objdump [ 257s] checking how to recognize dependent libraries... pass_all [ 257s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 257s] checking for ar... ar [ 257s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 257s] checking for strip... strip [ 257s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 257s] checking for ranlib... ranlib [ 257s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 257s] checking how to run the C preprocessor... gcc -E [ 257s] checking for ANSI C header files... yes [ 257s] checking for sys/types.h... yes [ 258s] checking for sys/stat.h... yes [ 258s] checking for stdlib.h... yes [ 258s] checking for string.h... yes [ 258s] checking for memory.h... yes [ 258s] checking for strings.h... yes [ 258s] checking for inttypes.h... yes [ 258s] checking for stdint.h... yes [ 258s] checking for unistd.h... yes [ 258s] checking for dlfcn.h... yes [ 258s] checking for objdir... .libs [ 258s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 258s] checking for gcc option to produce PIC... -fPIC -DPIC [ 258s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 258s] checking if gcc static flag -static works... no [ 258s] checking if gcc supports -c -o file.o... yes [ 258s] checking if gcc supports -c -o file.o... (cached) yes [ 258s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 258s] checking whether -lc should be explicitly linked in... no [ 258s] checking dynamic linker characteristics... GNU/Linux ld.so [ 258s] checking how to hardcode library paths into programs... immediate [ 258s] checking whether stripping libraries is possible... yes [ 258s] checking if libtool supports shared libraries... yes [ 258s] checking whether to build shared libraries... yes [ 258s] checking whether to build static libraries... yes [ 258s] checking for getisax... no [ 258s] checking whether byte ordering is bigendian... no [ 258s] checking for inline... inline [ 258s] checking whether the compiler supports -Werror... yes [ 258s] checking size of long... 4 [ 258s] checking whether __SUNPRO_C is declared... no [ 258s] checking whether __amd64 is declared... no [ 258s] checking whether the compiler supports -Wall... yes [ 258s] checking whether the compiler supports -fno-strict-aliasing... yes [ 258s] checking for gcc option to support OpenMP... -fopenmp [ 259s] checking whether the compiler supports -fvisibility=hidden... yes [ 259s] checking whether the compiler supports -xldscope=hidden... no [ 259s] checking whether to use Loongson MMI assembler... no [ 259s] checking whether to use MMX intrinsics... no [ 259s] checking whether to use SSE2 intrinsics... no [ 259s] checking whether to use VMX/Altivec intrinsics... no [ 259s] checking whether to use ARM SIMD assembler... yes [ 259s] checking whether to use ARM NEON assembler... yes [ 259s] checking whether to use ARM IWMMXT intrinsics... disabled [ 259s] checking whether to use MIPS DSPr2 assembler... no [ 259s] checking whether to use GNU-style inline assembler... yes [ 259s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 259s] checking for pkg-config... /usr/bin/pkg-config [ 259s] checking pkg-config is at least version 0.9.0... yes [ 259s] checking for pixman_version_string in -lpixman-1... no [ 259s] checking for posix_memalign... yes [ 259s] checking for sigaction... yes [ 259s] checking for alarm... yes [ 259s] checking sys/mman.h usability... yes [ 259s] checking sys/mman.h presence... yes [ 259s] checking for sys/mman.h... yes [ 259s] checking for mmap... yes [ 259s] checking for mprotect... yes [ 259s] checking for getpagesize... yes [ 259s] checking fenv.h usability... yes [ 259s] checking fenv.h presence... yes [ 259s] checking for fenv.h... yes [ 259s] checking for feenableexcept in -lm... yes [ 259s] checking for gettimeofday... yes [ 259s] checking sys/time.h usability... yes [ 259s] checking sys/time.h presence... yes [ 259s] checking for sys/time.h... yes [ 259s] checking for thread local storage (TLS) support... __thread [ 259s] checking for __attribute__((constructor))... yes [ 259s] checking for PNG... yes [ 259s] configure: creating ./config.status [ 260s] config.status: creating pixman-1.pc [ 260s] config.status: creating pixman-1-uninstalled.pc [ 260s] config.status: creating Makefile [ 260s] config.status: creating pixman/Makefile [ 260s] config.status: creating pixman/pixman-version.h [ 260s] config.status: creating demos/Makefile [ 260s] config.status: creating test/Makefile [ 260s] config.status: creating config.h [ 260s] config.status: executing depfiles commands [ 260s] config.status: executing libtool commands [ 260s] + make -j4 [ 260s] make all-recursive [ 260s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 260s] Making all in pixman [ 260s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 260s] CC pixman-access.lo [ 260s] CC pixman.lo [ 260s] CC pixman-access-accessors.lo [ 260s] CC pixman-bits-image.lo [ 261s] CC pixman-combine32.lo [ 263s] CC pixman-combine-float.lo [ 263s] CC pixman-conical-gradient.lo [ 263s] CC pixman-x86.lo [ 263s] CC pixman-mips.lo [ 263s] CC pixman-arm.lo [ 263s] CC pixman-ppc.lo [ 263s] CC pixman-edge.lo [ 264s] CC pixman-edge-accessors.lo [ 264s] CC pixman-fast-path.lo [ 264s] CC pixman-glyph.lo [ 264s] CC pixman-general.lo [ 264s] CC pixman-gradient-walker.lo [ 264s] CC pixman-image.lo [ 264s] CC pixman-implementation.lo [ 264s] CC pixman-linear-gradient.lo [ 264s] CC pixman-matrix.lo [ 265s] CC pixman-noop.lo [ 265s] CC pixman-radial-gradient.lo [ 265s] CC pixman-region16.lo [ 265s] CC pixman-region32.lo [ 265s] CC pixman-solid-fill.lo [ 265s] CC pixman-timer.lo [ 265s] CC pixman-trap.lo [ 266s] CC pixman-utils.lo [ 266s] CC pixman-arm-simd.lo [ 266s] CPPAS pixman-arm-simd-asm.lo [ 266s] CC pixman-arm-neon.lo [ 266s] CPPAS pixman-arm-neon-asm.lo [ 266s] CPPAS pixman-arm-neon-asm-bilinear.lo [ 267s] CCLD libpixman-arm-simd.la [ 272s] CCLD libpixman-arm-neon.la [ 273s] CCLD libpixman-1.la [ 276s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 276s] Making all in demos [ 276s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 276s] make[2]: Nothing to be done for `all'. [ 276s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 276s] Making all in test [ 276s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 276s] CC utils.lo [ 276s] CC a1-trap-test.o [ 276s] CC pdf-op-test.o [ 276s] CC region-test.o [ 276s] CC region-translate-test.o [ 276s] CC combiner-test.o [ 276s] CC fetch-test.o [ 276s] CC rotate-test.o [ 276s] CC oob-test.o [ 276s] CC infinite-loop.o [ 276s] CC trap-crasher.o [ 276s] CC alpha-loop.o [ 276s] CC scaling-crash-test.o [ 276s] CC scaling-helpers-test.o [ 276s] CC gradient-crash-test.o [ 276s] CC region-contains-test.o [ 276s] CC alphamap.o [ 277s] CC stress-test.o [ 277s] CC composite-traps-test.o [ 277s] CC blitters-test.o [ 277s] CC glyph-test.o [ 277s] CC scaling-test.o [ 277s] CC affine-test.o [ 277s] CC composite.o [ 277s] CC lowlevel-blt-bench.o [ 277s] lowlevel-blt-bench.c: In function 'bench_L': [ 277s] lowlevel-blt-bench.c:174:18: warning: variable 'qx' set but not used [-Wunused-but-set-variable] [ 278s] CCLD libutils.la [ 280s] CCLD a1-trap-test [ 280s] CCLD region-test [ 280s] CCLD pdf-op-test [ 280s] CCLD region-translate-test [ 280s] CCLD combiner-test [ 280s] CCLD fetch-test [ 280s] CCLD rotate-test [ 280s] CCLD oob-test [ 280s] CCLD infinite-loop [ 280s] CCLD trap-crasher [ 280s] CCLD alpha-loop [ 280s] CCLD scaling-crash-test [ 280s] CCLD scaling-helpers-test [ 280s] CCLD gradient-crash-test [ 280s] CCLD region-contains-test [ 280s] CCLD alphamap [ 280s] CCLD stress-test [ 280s] CCLD composite-traps-test [ 280s] CCLD blitters-test [ 280s] CCLD glyph-test [ 280s] CCLD scaling-test [ 280s] CCLD affine-test [ 281s] CCLD composite [ 281s] CCLD lowlevel-blt-bench [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] + exit 0 [ 281s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.RTocs6 [ 281s] + umask 022 [ 281s] + cd /home/abuild/rpmbuild/BUILD [ 281s] + cd pixman-0.28.2 [ 281s] + LANG=C [ 281s] + export LANG [ 281s] + unset DISPLAY [ 281s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 281s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 281s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 281s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm install [ 281s] Making install in pixman [ 281s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 281s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib" [ 281s] /bin/sh ../libtool --mode=install /usr/bin/install -c libpixman-1.la '/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib' [ 281s] libtool: install: /usr/bin/install -c .libs/libpixman-1.so.0.28.2 /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.so.0.28.2 [ 281s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib && { ln -s -f libpixman-1.so.0.28.2 libpixman-1.so.0 || { rm -f libpixman-1.so.0 && ln -s libpixman-1.so.0.28.2 libpixman-1.so.0; }; }) [ 281s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib && { ln -s -f libpixman-1.so.0.28.2 libpixman-1.so || { rm -f libpixman-1.so && ln -s libpixman-1.so.0.28.2 libpixman-1.so; }; }) [ 281s] libtool: install: /usr/bin/install -c .libs/libpixman-1.lai /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.la [ 281s] libtool: install: /usr/bin/install -c .libs/libpixman-1.a /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.a [ 281s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.a [ 281s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.a [ 281s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 281s] test -z "/usr/include/pixman-1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/include/pixman-1" [ 281s] /usr/bin/install -c -m 644 pixman.h pixman-version.h '/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/include/pixman-1' [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 281s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/pixman' [ 281s] Making install in demos [ 281s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 281s] make[2]: Nothing to be done for `install-exec-am'. [ 281s] make[2]: Nothing to be done for `install-data-am'. [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 281s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/demos' [ 281s] Making install in test [ 281s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 281s] make[2]: Nothing to be done for `install-exec-am'. [ 281s] make[2]: Nothing to be done for `install-data-am'. [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 281s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2/test' [ 281s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] make[2]: Nothing to be done for `install-exec-am'. [ 281s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/pkgconfig" [ 281s] /usr/bin/install -c -m 644 pixman-1.pc '/home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/pkgconfig' [ 281s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/pixman-0.28.2' [ 281s] + rm -f /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/share/info/dir [ 281s] + find /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm -regex '.*\.la$' [ 281s] + xargs rm -f -- [ 281s] + find /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm -regex '.*\.a$' [ 281s] + xargs rm -f -- [ 281s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/share/license [ 281s] + cat COPYING [ 281s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/pixman-0.28.2 [ 281s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm/usr/lib/libpixman-1.so.0.28.2 [ 281s] symlinked /usr/lib/debug/usr/lib/libpixman-1.so.0.28.2.debug to /usr/lib/debug/usr/lib/libpixman-1.so.0.debug [ 281s] symlinked /usr/lib/debug/usr/lib/libpixman-1.so.0.28.2.debug to /usr/lib/debug/usr/lib/libpixman-1.so.debug [ 281s] 1809 blocks [ 281s] + /usr/lib/rpm/check-buildroot [ 281s] + /usr/lib/rpm//brp-compress [ 281s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 281s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 281s] + /usr/lib/rpm/brp-python-hardlink [ 281s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 281s] Processing files: pixman-0.28.2-3.1.armv7l [ 281s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 281s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 281s] [ 281s] Provides: libpixman-1.so.0 [ 281s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 281s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 281s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 281s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 281s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.11) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) [ 281s] Processing files: pixman-devel-0.28.2-3.1.armv7l [ 281s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 281s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 281s] [ 282s] Provides: pkgconfig(pixman-1) = 0.28.2 [ 282s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 282s] Requires: /usr/bin/pkg-config libpixman-1.so.0 [ 282s] Processing files: pixman-debuginfo-0.28.2-3.1.armv7l [ 282s] Processing files: pixman-debugsource-0.28.2-3.1.armv7l [ 282s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 282s] Wrote: /home/abuild/rpmbuild/SRPMS/pixman-0.28.2-3.1.src.rpm [ 282s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pixman-0.28.2-3.1.armv7l.rpm [ 282s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pixman-devel-0.28.2-3.1.armv7l.rpm [ 282s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pixman-debuginfo-0.28.2-3.1.armv7l.rpm [ 282s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/pixman-debugsource-0.28.2-3.1.armv7l.rpm [ 282s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.ZHyZel [ 282s] + umask 022 [ 282s] + cd /home/abuild/rpmbuild/BUILD [ 282s] + cd pixman-0.28.2 [ 282s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/pixman-0.28.2-3.1.arm [ 282s] + exit 0 [ 282s] ... checking for files with abuild user/group [ 283s] ... creating baselibs [ 283s] ... saving built statistics [ 283s] /.build/build: line 3144: mount: command not found [ 283s] ERROR: no root disk device found, yet another new device name? [ 283s] ls: cannot access /sys/block/: No such file or directory [ 283s] /.build/build: line 3159: umount: command not found [ 283s] ... saving built packages [ 284s] /home/abuild/rpmbuild/RPMS/armv7l/pixman-0.28.2-3.1.armv7l.rpm [ 284s] /home/abuild/rpmbuild/RPMS/armv7l/pixman-debuginfo-0.28.2-3.1.armv7l.rpm [ 284s] /home/abuild/rpmbuild/RPMS/armv7l/pixman-debugsource-0.28.2-3.1.armv7l.rpm [ 284s] /home/abuild/rpmbuild/RPMS/armv7l/pixman-devel-0.28.2-3.1.armv7l.rpm [ 284s] /home/abuild/rpmbuild/SRPMS/pixman-0.28.2-3.1.src.rpm [ 284s] /home/abuild/rpmbuild/OTHER/_statistics [ 284s] [ 284s] w09 finished "build pixman.spec" at Wed Feb 4 08:21:38 UTC 2015. [ 284s] [ 285s] /.build/build: line 368: 227 Killed background_monitor_process [ 287s] [ 276.527768] SysRq : Power Off [ 287s] [ 276.535011] Power down. [ 287s] build: extracting built packages... [ 287s] pixman-0.28.2-3.1.armv7l.rpm [ 287s] pixman-debuginfo-0.28.2-3.1.armv7l.rpm [ 287s] pixman-debugsource-0.28.2-3.1.armv7l.rpm [ 287s] pixman-devel-0.28.2-3.1.armv7l.rpm [ 287s] pixman-0.28.2-3.1.src.rpm [ 287s] _statistics Retried build at Wed Feb 4 03:28:26 2015 returned same result, skipped