[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w13 started "build _service:gbs:popt.spec" at Wed Feb 4 03:57:23 UTC 2015. [ 0s] [ 0s] Building popt for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'bb1dfc223b3d23c854791a966a20b671' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:popt.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:popt.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:popt.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 23s] booting kvm ... [ 23s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 27s] doing fast boot [ 32s] Creating device nodes with udev [ 51s] Waiting for device /dev/vda to appear: ok [ 51s] fsck from util-linux 2.21.2 [ 51s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 52s] /dev/vda: clean, 4689/2392064 files, 237589/9568256 blocks [ 52s] fsck succeeded. Mounting root device read-write. [ 52s] Mounting root /dev/vda [ 52s] mount -o rw -t ext4 /dev/vda /root [ 56s] replacing /etc/mtab with symlink to /proc/self/mounts [ 59s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 98s] 2nd stage started in virtual machine [ 98s] machine type: armv7l [ 98s] switching personality to 8... [ 99s] 2nd stage started in virtual machine [ 99s] machine type: armv7l [ 99s] /.build/build: line 770: mount: command not found [ 100s] swapon on /dev/vdb [ 100s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 100s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 103s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 104s] logging output to //.build.log... [ 105s] processing specfile /.build-srcdir/_service:gbs:popt.spec ... [ 105s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:popt.spec build rpmlint-Factory ... [ 114s] running rpm-x86-arm postinstall script [ 115s] running rpm-libs-x86-arm postinstall script [ 115s] running tizen-accelerator postinstall script [ 116s] running bash-x86-arm postinstall script [ 116s] initializing rpm db... [ 123s] [1/139] installing cross-armv7l-platformfile-0.0.1-3.1 [ 124s] [2/139] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 125s] [3/139] installing tizen-release-2.2.0-3.1 [ 126s] [4/139] installing tzdata-2013h-1.134 [ 127s] [5/139] installing libgcc-4.6.4-3.8 [ 127s] [6/139] installing setup-0.1-3.1 [ 127s] [7/139] installing filesystem-0.1-3.1 [ 130s] warning: group lock does not exist - using root [ 131s] [8/139] installing eglibc-2.13-3.4 [ 133s] [9/139] installing libstdc++-4.6.4-3.8 [ 135s] [10/139] installing eglibc-common-2.13-3.4 [ 138s] [11/139] installing libstdc++-devel-4.6.4-3.8 [ 138s] [12/139] installing bash-4.1-1.19 [ 138s] [13/139] installing bzip2-libs-1.0.5-3.1 [ 139s] [14/139] installing cpio-2.8-1.135 [ 139s] [15/139] installing diffutils-3.0-1.17 [ 140s] [16/139] installing e2fsprogs-libs-1.41.9-1.53 [ 140s] [17/139] installing elfutils-libelf-0.152-3.4 [ 140s] [18/139] installing fdupes-1.40-1.20 [ 141s] [19/139] installing findutils-4.2.31-2.134 [ 141s] [20/139] installing gdbm-1.8.3-3.3 [ 141s] [21/139] installing libattr-2.4.44-3.1 [ 142s] [22/139] installing libgomp-4.6.4-3.8 [ 142s] [23/139] installing liblua-5.1.4-3.1 [ 142s] [24/139] installing libuuid-2.20.2-1.127 [ 143s] [25/139] installing lzo-2.03-3.3 [ 143s] [26/139] installing m4-1.4.14-1.20 [ 144s] [27/139] installing net-tools-1.60-2.134 [ 144s] [28/139] installing nspr-4.9-3.1 [ 144s] [29/139] installing nss-softokn-freebl-3.12.9-3.6 [ 145s] [30/139] installing patch-2.6-1.136 [ 145s] [31/139] installing pkg-config-0.25-2.1 [ 145s] [32/139] installing popt-1.16-3.1 [ 145s] [33/139] installing readline-5.2-3.1 [ 145s] [34/139] installing sed-4.1.5-1.17 [ 146s] [35/139] installing sqlite-3.7.13-3.1 [ 146s] [36/139] installing tar-1.17-3.1 [ 146s] [37/139] installing xz-libs-5.0.3-3.3 [ 147s] [38/139] installing zlib-1.2.5-3.5 [ 147s] [39/139] installing gmp-4.2.1-3.2 [ 147s] [40/139] installing libpcre-7.7-3.3 [ 148s] [41/139] installing ncurses-libs-5.7-3.1 [ 148s] [42/139] installing build-compare-2009.10.14-3.3 [ 148s] [43/139] installing qemu.x86_64-1.2-5.1 [ 162s] [44/139] installing eglibc-headers-2.13-3.4 [ 163s] [45/139] installing libcap-2.21-3.1 [ 163s] [46/139] installing unzip-6.0-3.4 [ 163s] [47/139] installing zlib-devel-1.2.5-3.5 [ 164s] [48/139] installing grep-2.5.1a-1.17 [ 164s] [49/139] installing libacl-2.2.49-3.2 [ 164s] [50/139] installing libfile-5.04-3.2 [ 165s] [51/139] installing lzo-minilzo-2.03-3.3 [ 165s] [52/139] installing make-3.82-3.2 [ 166s] [53/139] installing mpfr-3.0.0-3.2 [ 166s] [54/139] installing ncurses-5.7-3.1 [ 167s] [55/139] installing bzip2-1.0.5-3.1 [ 167s] [56/139] installing libblkid-2.20.2-1.127 [ 167s] [57/139] installing xz-5.0.3-3.3 [ 168s] [58/139] installing binutils-2.22-3.1 [ 173s] [59/139] installing elfutils-libs-0.152-3.4 [ 174s] [60/139] installing nss-3.12.9-3.6 [ 175s] [61/139] installing perl-5.12.1-3.1 [ 193s] [62/139] installing ncurses-base-5.7-3.1 [ 194s] [63/139] installing perl-HTML-Tagset-3.20-3.1 [ 194s] [64/139] installing perl-IO-Compress-Base-2.008-3.1 [ 195s] [65/139] installing perl-Module-Pluggable-3.60-3.1 [ 195s] [66/139] installing perl-Pod-Escapes-1.04-3.1 [ 195s] [67/139] installing perl-TimeDate-1.20-3.1 [ 196s] [68/139] installing eglibc-devel-2.13-3.4 [ 196s] [69/139] installing file-5.04-3.2 [ 196s] [70/139] installing lzo-devel-2.03-3.3 [ 197s] [71/139] installing perl-Compress-Raw-Zlib-2.008-3.1 [ 197s] [72/139] installing perl-devel-5.12.1-3.1 [ 198s] [73/139] installing perl-libs-5.12.1-3.1 [ 201s] [74/139] installing coreutils-6.9-3.1 [ 201s] [75/139] installing libmount-2.20.2-1.127 [ 202s] [76/139] installing mpc-0.9-3.2 [ 202s] [77/139] installing xz-lzma-compat-5.0.3-3.3 [ 203s] [78/139] installing elfutils-0.152-3.4 [ 204s] [79/139] installing nss-sysinit-3.12.9-3.6 [ 205s] [80/139] installing rpm-libs-4.9.1-4.1 [ 206s] [81/139] installing perl-ExtUtils-ParseXS-2.18-3.1 [ 206s] [82/139] installing perl-Pod-Simple-3.07-3.1 [ 206s] [83/139] installing perl-Test-Simple-0.80-3.1 [ 207s] [84/139] installing tizen-accelerator-1.0.1-3.1 [ 208s] [85/139] installing perl-IO-Compress-Zlib-2.008-3.1 [ 209s] [86/139] installing perl-Test-Harness-3.12-3.1 [ 209s] [87/139] installing gawk-3.1.5-3.1 [ 209s] [88/139] installing gzip-1.3.12-1.13 [ 209s] [89/139] installing build-2011.01.10a-3.1 [ 210s] [90/139] installing rpm-4.9.1-4.1 [ 210s] [91/139] installing cpp-4.6.4-3.8 [ 211s] [92/139] installing util-linux-2.20.2-1.127 [ 211s] [93/139] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 212s] [94/139] installing eglibc-x86-arm-2.13-2.3 [ 213s] [95/139] installing elfutils-libelf-x86-arm-0.152-2.1 [ 213s] [96/139] installing elfutils-libs-x86-arm-0.152-2.3 [ 213s] [97/139] installing gmp-x86-arm-4.2.1-2.1 [ 214s] [98/139] installing libacl-x86-arm-2.2.49-2.1 [ 214s] [99/139] installing libattr-x86-arm-2.4.44-2.1 [ 214s] [100/139] installing libcap-x86-arm-2.21-2.1 [ 214s] [101/139] installing libfile-x86-arm-5.04-2.2 [ 214s] [102/139] installing libgcc-x86-arm-4.6.4-2.1 [ 215s] [103/139] installing liblua-x86-arm-5.1.4-2.1 [ 215s] [104/139] installing mpc-x86-arm-0.9-2.1 [ 215s] [105/139] installing mpfr-x86-arm-3.0.0-2.1 [ 215s] [106/139] installing ncurses-libs-x86-arm-5.7-2.2 [ 215s] [107/139] installing nspr-x86-arm-4.9-2.3 [ 215s] [108/139] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 216s] [109/139] installing nss-x86-arm-3.12.9-2.3 [ 216s] [110/139] installing perl-ExtUtils-MakeMaker-6.36-3.1 [ 216s] [111/139] installing popt-x86-arm-1.16-2.1 [ 216s] [112/139] installing rpm-libs-x86-arm-4.9.1-2.2 [ 216s] [113/139] installing sqlite-x86-arm-3.7.13-2.1 [ 217s] [114/139] installing xz-libs-x86-arm-5.0.3-2.1 [ 217s] [115/139] installing zlib-x86-arm-1.2.5-2.1 [ 217s] [116/139] installing gcc-4.6.4-3.8 [ 217s] [117/139] installing rpm-build-4.9.1-4.1 [ 217s] [118/139] installing perl-CPAN-1.9205-3.1 [ 217s] [119/139] installing bash-x86-arm-4.1-2.1 [ 218s] [120/139] installing fdupes-x86-arm-1.40-2.1 [ 218s] [121/139] installing findutils-x86-arm-4.2.31-2.1 [ 218s] [122/139] installing gawk-x86-arm-3.1.5-2.2 [ 218s] [123/139] installing gzip-x86-arm-1.3.12-2.1 [ 219s] [124/139] installing make-x86-arm-3.82-2.1 [ 219s] [125/139] installing sed-x86-arm-4.1.5-2.1 [ 219s] [126/139] installing tar-x86-arm-1.17-2.2 [ 219s] [127/139] installing diffutils-x86-arm-3.0-2.1 [ 220s] [128/139] installing patch-x86-arm-2.6-2.1 [ 220s] [129/139] installing autoconf-2.68-3.1 [ 220s] [130/139] installing coreutils-x86-arm-6.9-2.1 [ 223s] [131/139] installing file-x86-arm-5.04-2.1 [ 223s] [132/139] installing elfutils-x86-arm-0.152-2.3 [ 223s] [133/139] installing gcc-c++-4.6.4-3.8 [ 224s] [134/139] installing rpm-x86-arm-4.9.1-2.2 [ 224s] /bin/rpm.orig-arm already present - skipping. [ 224s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 224s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 224s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 224s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 224s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 224s] [135/139] installing rpm-build-x86-arm-4.9.1-2.2 [ 225s] [136/139] installing automake-1.11.1-3.1 [ 225s] [137/139] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.3 [ 226s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 226s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 226s] [138/139] installing libtool-2.2.6b-3.2 [ 226s] [139/139] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 227s] removing nis flags from //etc/nsswitch.conf... [ 227s] now finalizing build dir... [ 227s] /.build/build: line 2585: mount: command not found [ 227s] /.build/build: line 2586: mount: command not found [ 231s] build target is armv7l-tizen-linux [ 231s] ----------------------------------------------------------------- [ 231s] I have the following modifications for popt.spec: [ 231s] 5c5 [ 231s] < Release: 3 [ 231s] --- [ 231s] > Release: 3.2 [ 231s] ----------------------------------------------------------------- [ 231s] ----- building popt.spec (user abuild) [ 231s] ----------------------------------------------------------------- [ 231s] ----------------------------------------------------------------- [ 231s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/bb1dfc223b3d23c854791a966a20b671-popt' /home/abuild/rpmbuild/SOURCES/popt.spec [ 231s] Building target platforms: armv7l-tizen-linux [ 231s] Building for target armv7l-tizen-linux [ 231s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.6AXvKW [ 231s] + umask 022 [ 231s] + cd /home/abuild/rpmbuild/BUILD [ 231s] + LANG=C [ 231s] + export LANG [ 231s] + unset DISPLAY [ 231s] + cd /home/abuild/rpmbuild/BUILD [ 231s] + rm -rf popt-1.16 [ 231s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/popt-1.16.tar.gz [ 231s] + /bin/tar -xf - [ 231s] + STATUS=0 [ 231s] + '[' 0 -ne 0 ']' [ 231s] + cd popt-1.16 [ 231s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 231s] + exit 0 [ 231s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.V5AWwy [ 231s] + umask 022 [ 231s] + cd /home/abuild/rpmbuild/BUILD [ 231s] + cd popt-1.16 [ 231s] + LANG=C [ 231s] + export LANG [ 231s] + unset DISPLAY [ 231s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 231s] + export CFLAGS [ 231s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 231s] + export CXXFLAGS [ 231s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 231s] + export FFLAGS [ 231s] + LD_AS_NEEDED=1 [ 231s] + export LD_AS_NEEDED [ 231s] + cp /home/abuild/rpmbuild/SOURCES/popt.manifest . [ 231s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 231s] + export CFLAGS [ 231s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 231s] + export CXXFLAGS [ 231s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 231s] + export FFLAGS [ 231s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --libdir=/lib --disable-nls [ 231s] checking build system type... armv7l-unknown-linux-gnueabi [ 231s] checking host system type... armv7l-unknown-linux-gnueabi [ 231s] checking target system type... armv7l-tizen-linux-gnueabi [ 231s] checking for a BSD-compatible install... /usr/bin/install -c [ 232s] checking whether build environment is sane... yes [ 232s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 232s] checking for gawk... gawk [ 232s] checking whether make sets $(MAKE)... yes [ 232s] checking whether to enable maintainer-specific portions of Makefiles... no [ 232s] checking for style of include used by make... GNU [ 232s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 232s] checking for gcc... gcc [ 232s] checking for C compiler default output file name... a.out [ 232s] checking whether the C compiler works... yes [ 232s] checking whether we are cross compiling... no [ 232s] checking for suffix of executables... [ 232s] checking for suffix of object files... o [ 233s] checking whether we are using the GNU C compiler... yes [ 233s] checking whether gcc accepts -g... yes [ 233s] checking for gcc option to accept ISO C89... none needed [ 233s] checking dependency style of gcc... gcc3 [ 233s] checking for gcc option to accept ISO C99... -std=gnu99 [ 233s] checking for gcc -std=gnu99 option to accept ISO Standard C... (cached) -std=gnu99 [ 233s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc -std=gnu99 [ 233s] checking whether we are using the GNU C compiler... (cached) yes [ 233s] checking whether gcc -std=gnu99 accepts -g... (cached) yes [ 233s] checking for gcc -std=gnu99 option to accept ISO C89... (cached) none needed [ 233s] checking dependency style of gcc -std=gnu99... (cached) gcc3 [ 233s] checking for a BSD-compatible install... /usr/bin/install -c [ 233s] checking for a sed that does not truncate output... /bin/sed [ 233s] checking for grep that handles long lines and -e... /bin/grep [ 233s] checking for egrep... /bin/grep -E [ 233s] checking for fgrep... /bin/grep -F [ 233s] checking for ld used by gcc -std=gnu99... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 233s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 233s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 233s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 233s] checking whether ln -s works... yes [ 233s] checking the maximum length of command line arguments... 1572864 [ 233s] checking whether the shell understands some XSI constructs... yes [ 233s] checking whether the shell understands "+="... yes [ 233s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 233s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 233s] checking for objdump... objdump [ 233s] checking how to recognize dependent libraries... pass_all [ 233s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 233s] checking for ar... ar [ 233s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 233s] checking for strip... strip [ 233s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 233s] checking for ranlib... ranlib [ 233s] checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok [ 233s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 233s] checking for ANSI C header files... yes [ 234s] checking for sys/types.h... yes [ 234s] checking for sys/stat.h... yes [ 234s] checking for stdlib.h... yes [ 234s] checking for string.h... yes [ 234s] checking for memory.h... yes [ 234s] checking for strings.h... yes [ 234s] checking for inttypes.h... yes [ 234s] checking for stdint.h... yes [ 234s] checking for unistd.h... yes [ 234s] checking for dlfcn.h... yes [ 234s] checking for objdir... .libs [ 234s] checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no [ 234s] checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC [ 234s] checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes [ 234s] checking if gcc -std=gnu99 static flag -static works... no [ 234s] checking if gcc -std=gnu99 supports -c -o file.o... yes [ 234s] checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes [ 234s] checking whether the gcc -std=gnu99 linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 234s] checking whether -lc should be explicitly linked in... no [ 234s] checking dynamic linker characteristics... GNU/Linux ld.so [ 234s] checking how to hardcode library paths into programs... immediate [ 234s] checking whether stripping libraries is possible... yes [ 234s] checking if libtool supports shared libraries... yes [ 234s] checking whether to build shared libraries... yes [ 234s] checking whether to build static libraries... no [ 234s] checking whether gcc -std=gnu99 needs -traditional... no [ 234s] checking for special C compiler options needed for large files... no [ 234s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 235s] checking for library containing strerror... none required [ 235s] checking for function prototypes... yes [ 235s] checking for string.h... (cached) yes [ 235s] checking float.h usability... yes [ 235s] checking float.h presence... yes [ 235s] checking for float.h... yes [ 235s] checking fnmatch.h usability... yes [ 235s] checking fnmatch.h presence... yes [ 235s] checking for fnmatch.h... yes [ 235s] checking glob.h usability... yes [ 235s] checking glob.h presence... yes [ 235s] checking for glob.h... yes [ 235s] checking langinfo.h usability... yes [ 235s] checking langinfo.h presence... yes [ 235s] checking for langinfo.h... yes [ 235s] checking libintl.h usability... yes [ 235s] checking libintl.h presence... yes [ 235s] checking for libintl.h... yes [ 235s] checking mcheck.h usability... yes [ 235s] checking mcheck.h presence... yes [ 235s] checking for mcheck.h... yes [ 235s] checking for unistd.h... (cached) yes [ 239s] checking for setreuid... yes [ 239s] checking for getuid... yes [ 240s] checking for geteuid... yes [ 242s] checking for iconv... yes [ 242s] checking for mtrace... yes [ 243s] checking for __secure_getenv... yes [ 243s] checking for setregid... yes [ 243s] checking for stpcpy... yes [ 243s] checking for strerror... yes [ 243s] checking for vasprintf... yes [ 243s] checking for srandom... yes [ 243s] checking whether NLS is requested... no [ 243s] checking for msgfmt... no [ 243s] checking for gmsgfmt... : [ 243s] checking for xgettext... no [ 243s] checking for msgmerge... no [ 243s] checking for ld used by GCC... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 243s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 243s] checking for shared library run path origin... done [ 243s] checking for CFPreferencesCopyAppValue... no [ 243s] checking for CFLocaleCopyCurrent... no [ 243s] checking whether to use NLS... no [ 243s] checking for iconv... yes [ 243s] checking for working iconv... yes [ 243s] configure: creating ./config.status [ 243s] config.status: creating po/Makefile.in [ 243s] config.status: creating m4/Makefile [ 243s] config.status: creating Doxyfile [ 243s] config.status: creating Makefile [ 243s] config.status: creating popt.pc [ 243s] config.status: creating popt.spec [ 243s] config.status: creating test-poptrc [ 243s] config.status: creating auto/Makefile [ 244s] config.status: creating auto/desc [ 244s] config.status: creating auto/types [ 244s] config.status: creating config.h [ 244s] config.status: executing depfiles commands [ 244s] config.status: executing libtool commands [ 244s] config.status: executing po-directories commands [ 244s] config.status: creating po/POTFILES [ 244s] config.status: creating po/Makefile [ 244s] + make -j4 [ 244s] make all-recursive [ 244s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 244s] Making all in po [ 244s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 244s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 244s] Making all in . [ 244s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 244s] /bin/sh ./libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popt.lo -MD -MP -MF .deps/popt.Tpo -c -o popt.lo popt.c [ 244s] /bin/sh ./libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptparse.lo -MD -MP -MF .deps/poptparse.Tpo -c -o poptparse.lo poptparse.c [ 244s] /bin/sh ./libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptconfig.lo -MD -MP -MF .deps/poptconfig.Tpo -c -o poptconfig.lo poptconfig.c [ 244s] /bin/sh ./libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popthelp.lo -MD -MP -MF .deps/popthelp.Tpo -c -o popthelp.lo popthelp.c [ 244s] libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptparse.lo -MD -MP -MF .deps/poptparse.Tpo -c poptparse.c -fPIC -DPIC -o .libs/poptparse.o [ 244s] libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popthelp.lo -MD -MP -MF .deps/popthelp.Tpo -c popthelp.c -fPIC -DPIC -o .libs/popthelp.o [ 244s] libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT popt.lo -MD -MP -MF .deps/popt.Tpo -c popt.c -fPIC -DPIC -o .libs/popt.o [ 244s] libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptconfig.lo -MD -MP -MF .deps/poptconfig.Tpo -c poptconfig.c -fPIC -DPIC -o .libs/poptconfig.o [ 244s] popthelp.c: In function 'getArgDescrip': [ 244s] popthelp.c:176:27: warning: unused parameter 'translation_domain' [-Wunused-parameter] [ 244s] popthelp.c: In function 'singleOptionDefaultValue': [ 244s] popthelp.c:230:27: warning: unused parameter 'translation_domain' [-Wunused-parameter] [ 244s] popthelp.c: In function 'singleOptionHelp': [ 244s] popthelp.c:325:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 244s] popthelp.c: In function 'singleTableHelp': [ 244s] popthelp.c:606:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 244s] popthelp.c: In function 'showHelpIntro': [ 244s] popthelp.c:647:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 244s] popthelp.c: In function 'poptPrintHelp': [ 244s] popthelp.c:666:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 244s] popt.c: In function 'execCommand': [ 244s] popt.c:483:9: warning: variable 'rc' set but not used [-Wunused-but-set-variable] [ 244s] poptconfig.c: In function 'poptReadConfigFile': [ 244s] poptconfig.c:399:9: warning: variable 'xx' set but not used [-Wunused-but-set-variable] [ 244s] mv -f .deps/poptparse.Tpo .deps/poptparse.Plo [ 244s] /bin/sh ./libtool --tag=CC --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptint.lo -MD -MP -MF .deps/poptint.Tpo -c -o poptint.lo poptint.c [ 244s] libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT poptint.lo -MD -MP -MF .deps/poptint.Tpo -c poptint.c -fPIC -DPIC -o .libs/poptint.o [ 244s] mv -f .deps/poptconfig.Tpo .deps/poptconfig.Plo [ 244s] gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT test1.o -MD -MP -MF .deps/test1.Tpo -c -o test1.o test1.c [ 244s] mv -f .deps/poptint.Tpo .deps/poptint.Plo [ 244s] gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT test2.o -MD -MP -MF .deps/test2.Tpo -c -o test2.o test2.c [ 244s] test1.c:164:4: warning: suggest parentheses around arithmetic in operand of '|' [-Wparentheses] [ 244s] mv -f .deps/test2.Tpo .deps/test2.Po [ 244s] gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I. -I. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -MT tdict.o -MD -MP -MF .deps/tdict.Tpo -c -o tdict.o tdict.c [ 244s] mv -f .deps/popthelp.Tpo .deps/popthelp.Plo [ 244s] mv -f .deps/test1.Tpo .deps/test1.Po [ 244s] mv -f .deps/tdict.Tpo .deps/tdict.Po [ 244s] mv -f .deps/popt.Tpo .deps/popt.Plo [ 244s] /bin/sh ./libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -no-undefined -Wl,--version-script=./libpopt.vers -o libpopt.la -rpath /lib popt.lo poptparse.lo poptconfig.lo popthelp.lo poptint.lo [ 244s] libtool: link: gcc -std=gnu99 -shared .libs/popt.o .libs/poptparse.o .libs/poptconfig.o .libs/popthelp.o .libs/poptint.o -Wl,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -mthumb -Wl,--version-script=./libpopt.vers -Wl,-soname -Wl,libpopt.so.0 -o .libs/libpopt.so.0.0.0 [ 245s] libtool: link: (cd ".libs" && rm -f "libpopt.so.0" && ln -s "libpopt.so.0.0.0" "libpopt.so.0") [ 245s] libtool: link: (cd ".libs" && rm -f "libpopt.so" && ln -s "libpopt.so.0.0.0" "libpopt.so") [ 245s] libtool: link: ( cd ".libs" && rm -f "libpopt.la" && ln -s "../libpopt.la" "libpopt.la" ) [ 245s] /bin/sh ./libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o test1 test1.o libpopt.la [ 245s] /bin/sh ./libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o test2 test2.o libpopt.la [ 245s] /bin/sh ./libtool --tag=CC --mode=link gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o tdict tdict.o libpopt.la [ 245s] libtool: link: gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/test2 test2.o ./.libs/libpopt.so [ 245s] libtool: link: gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/test1 test1.o ./.libs/libpopt.so [ 245s] libtool: link: gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -Wall -W -D_GNU_SOURCE -D_REENTRANT -o .libs/tdict tdict.o ./.libs/libpopt.so [ 245s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] Making all in auto [ 245s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[2]: Nothing to be done for `all'. [ 245s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] + exit 0 [ 245s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.LAkFXZ [ 245s] + umask 022 [ 245s] + cd /home/abuild/rpmbuild/BUILD [ 245s] + cd popt-1.16 [ 245s] + LANG=C [ 245s] + export LANG [ 245s] + unset DISPLAY [ 245s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 245s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 245s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 245s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm install [ 245s] /usr/bin/make install-recursive [ 245s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] Making install in po [ 245s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 245s] if test "popt" = "gettext-tools"; then \ [ 245s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/gettext/po; \ [ 245s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 245s] /usr/bin/install -c -m 644 ./$file \ [ 245s] /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/gettext/po/$file; \ [ 245s] done; \ [ 245s] for file in Makevars; do \ [ 245s] rm -f /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/gettext/po/$file; \ [ 245s] done; \ [ 245s] else \ [ 245s] : ; \ [ 245s] fi [ 245s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16/po' [ 245s] Making install in . [ 245s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] make[3]: Nothing to be done for `install-exec-am'. [ 245s] test -z "/usr/include" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/include" [ 245s] /usr/bin/install -c -m 644 popt.h '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/include' [ 245s] test -z "/usr/share/man/man3" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/man/man3" [ 245s] /usr/bin/install -c -m 644 popt.3 '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/man/man3' [ 245s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/lib/pkgconfig" [ 245s] /usr/bin/install -c -m 644 popt.pc '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/lib/pkgconfig' [ 245s] test -z "/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib" [ 245s] /bin/sh ./libtool --mode=install /usr/bin/install -c libpopt.la '/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib' [ 245s] libtool: install: /usr/bin/install -c .libs/libpopt.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib/libpopt.so.0.0.0 [ 245s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib && { ln -s -f libpopt.so.0.0.0 libpopt.so.0 || { rm -f libpopt.so.0 && ln -s libpopt.so.0.0.0 libpopt.so.0; }; }) [ 245s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib && { ln -s -f libpopt.so.0.0.0 libpopt.so || { rm -f libpopt.so && ln -s libpopt.so.0.0.0 libpopt.so; }; }) [ 245s] libtool: install: /usr/bin/install -c .libs/libpopt.lai /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib/libpopt.la [ 245s] libtool: install: warning: remember to run `libtool --finish /lib' [ 245s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] Making install in auto [ 245s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[3]: Nothing to be done for `install-exec-am'. [ 245s] make[3]: Nothing to be done for `install-data-am'. [ 245s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16/auto' [ 245s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/popt-1.16' [ 245s] + rm -f /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/info/dir [ 245s] + find /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm -regex '.*\.la$' [ 245s] + xargs rm -f -- [ 245s] + find /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm -regex '.*\.a$' [ 245s] + xargs rm -f -- [ 245s] + rm -f /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib/libpopt.la /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib/libpopt.so [ 245s] + pushd /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib [ 245s] ~/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib ~/rpmbuild/BUILD/popt-1.16 [ 245s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/lib [ 245s] ++ ls libpopt.so.0.0.0 [ 245s] + ln -sf ../../lib/libpopt.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/lib/libpopt.so [ 245s] + popd [ 245s] ~/rpmbuild/BUILD/popt-1.16 [ 245s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/etc/popt.d [ 245s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/license [ 245s] + for keyword in LICENSE COPYING COPYRIGHT [ 245s] ++ find /home/abuild/rpmbuild/BUILD -name LICENSE [ 245s] + for keyword in LICENSE COPYING COPYRIGHT [ 245s] ++ find /home/abuild/rpmbuild/BUILD -name COPYING [ 245s] + for file in '`find /home/abuild/rpmbuild/BUILD -name $keyword`' [ 245s] + cat /home/abuild/rpmbuild/BUILD/popt-1.16/COPYING [ 245s] + echo '' [ 245s] [ 245s] + for keyword in LICENSE COPYING COPYRIGHT [ 245s] ++ find /home/abuild/rpmbuild/BUILD -name COPYRIGHT [ 245s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/popt-1.16 [ 245s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/lib/libpopt.so.0.0.0 [ 245s] symlinked /usr/lib/debug/lib/libpopt.so.0.0.0.debug to /usr/lib/debug/lib/libpopt.so.0.debug [ 245s] symlinked /usr/lib/debug/lib/libpopt.so.0.0.0.debug to /usr/lib/debug/usr/lib/libpopt.so.debug [ 245s] 307 blocks [ 245s] + /usr/lib/rpm/check-buildroot [ 245s] + /usr/lib/rpm//brp-compress [ 245s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 245s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 245s] + /usr/lib/rpm/brp-python-hardlink [ 245s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 245s] Processing files: popt-1.16-3.2.armv7l [ 245s] Aptk: PG1hbmlmZXN0PgogICAgPHJlcXVlc3Q+CiAgICAgICAgPGRvbWFpbiBuYW1lPSJf [ 245s] Ii8+CiAgICA8L3JlcXVlc3Q+CjwvbWFuaWZlc3Q+Cg== [ 245s] [ 245s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.oqvhOt [ 245s] + umask 022 [ 245s] + cd /home/abuild/rpmbuild/BUILD [ 245s] + cd popt-1.16 [ 245s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-1.16 [ 245s] + export DOCDIR [ 245s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-1.16 [ 245s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-1.16 [ 245s] + exit 0 [ 245s] Provides: libpopt.so.0 libpopt.so.0(LIBPOPT_0) [ 245s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 245s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 245s] Requires(post): /sbin/ldconfig /sbin/ldconfig [ 245s] Requires(postun): /sbin/ldconfig /sbin/ldconfig [ 245s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 245s] Processing files: popt-devel-1.16-3.2.armv7l [ 245s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.IvSsIX [ 245s] + umask 022 [ 245s] + cd /home/abuild/rpmbuild/BUILD [ 245s] + cd popt-1.16 [ 245s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-devel-1.16 [ 245s] + export DOCDIR [ 245s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-devel-1.16 [ 245s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm/usr/share/doc/popt-devel-1.16 [ 245s] + exit 0 [ 245s] Provides: pkgconfig(popt) = 1.16 [ 245s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 245s] Requires: /usr/bin/pkg-config libpopt.so.0 [ 245s] Processing files: popt-debuginfo-1.16-3.2.armv7l [ 245s] Processing files: popt-debugsource-1.16-3.2.armv7l [ 245s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 245s] Wrote: /home/abuild/rpmbuild/SRPMS/popt-1.16-3.2.src.rpm [ 245s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-1.16-3.2.armv7l.rpm [ 245s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-3.2.armv7l.rpm [ 246s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-debuginfo-1.16-3.2.armv7l.rpm [ 246s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-3.2.armv7l.rpm [ 246s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.HsZRzV [ 246s] + umask 022 [ 246s] + cd /home/abuild/rpmbuild/BUILD [ 246s] + cd popt-1.16 [ 246s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/popt-1.16-3.2.arm [ 246s] + exit 0 [ 246s] ... checking for files with abuild user/group [ 246s] ... creating baselibs [ 247s] ... comparing built packages with the former built [ 247s] /usr/lib/build/rpm-check.sh [ 247s] compare /.build.oldpackages/popt-1.16-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/popt-1.16-3.2.src.rpm [ 247s] compare /.build.oldpackages/popt-1.16-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-1.16-3.2.armv7l.rpm [ 248s] /lib/libpopt.so.0.0.0 differs in ELF sections [ 248s] --- /tmp/tmp.GrqfFlNi8g 2015-02-04 04:01:30.722743216 +0000 [ 248s] +++ /tmp/tmp.PNrOSmL9tu 2015-02-04 04:01:30.730743216 +0000 [ 248s] @@ -3,8 +3,8 @@ [ 248s] [ 248s] Contents of section .note.gnu.build-id: [ 248s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 248s] - 0104 8a3321c3 692e9401 2bed9a16 24f01b77 .3!.i...+...$..w [ 248s] - 0114 a796b88c .... [ 248s] + 0104 06e5d4f4 880a71d8 f64364ca 29d4bc68 ......q..Cd.)..h [ 248s] + 0114 577f6ff9 W.o. [ 248s] Contents of section .hash: [ 248s] 0118 61000000 76000000 00000000 55000000 a...v.......U... [ 248s] 0128 00000000 72000000 0b000000 5f000000 ....r......._... [ 248s] @@ -1943,4 +1943,4 @@ [ 248s] 0030 0222012c 01 .".,. [ 248s] Contents of section .gnu_debuglink: [ 248s] 0000 6c696270 6f70742e 736f2e30 2e302e30 libpopt.so.0.0.0 [ 248s] - 0010 2e646562 75670000 d7d75d3d .debug....]= [ 248s] + 0010 2e646562 75670000 c4047ade .debug....z. [ 248s] compare /.build.oldpackages/popt-debuginfo-1.16-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-debuginfo-1.16-3.2.armv7l.rpm [ 248s] --- /tmp/tmp.Rhc7Olcfwe 2015-02-04 04:01:31.006743219 +0000 [ 248s] +++ /tmp/tmp.kxGuglyekc 2015-02-04 04:01:31.018743220 +0000 [ 248s] @@ -1,8 +1,8 @@ [ 248s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 248s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 248s] -/usr/lib/debug/.build-id/8a/ 0 (none) 40755 root root 0 4294967295 [ 248s] -/usr/lib/debug/.build-id/8a/3321c3692e94012bed9a1624f01b77a796b88c 0 (none) 120777 root root 0 4294967295 ../../../../../lib/libpopt.so.0.0.0 [ 248s] -/usr/lib/debug/.build-id/8a/3321c3692e94012bed9a1624f01b77a796b88c.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libpopt.so.0.0.0.debug [ 248s] +/usr/lib/debug/.build-id/06/ 0 (none) 40755 root root 0 4294967295 [ 248s] +/usr/lib/debug/.build-id/06/e5d4f4880a71d8f64364ca29d4bc68577f6ff9 0 (none) 120777 root root 0 4294967295 ../../../../../lib/libpopt.so.0.0.0 [ 248s] +/usr/lib/debug/.build-id/06/e5d4f4880a71d8f64364ca29d4bc68577f6ff9.debug 0 (none) 120777 root root 0 4294967295 ../../lib/libpopt.so.0.0.0.debug [ 248s] /usr/lib/debug/lib/ 0 (none) 40755 root root 0 4294967295 [ 248s] /usr/lib/debug/lib/libpopt.so.0.0.0.debug 0 (none) 100755 root root 0 4294967295 [ 248s] /usr/lib/debug/lib/libpopt.so.0.debug 0 (none) 120777 root root 0 4294967295 libpopt.so.0.0.0.debug [ 248s] RPM meta information is different [ 248s] compare /.build.oldpackages/popt-debugsource-1.16-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-3.2.armv7l.rpm [ 249s] compare /.build.oldpackages/popt-devel-1.16-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-3.2.armv7l.rpm [ 249s] ... saving built statistics [ 249s] /.build/build: line 3144: mount: command not found [ 249s] ERROR: no root disk device found, yet another new device name? [ 249s] ls: cannot access /sys/block/: No such file or directory [ 249s] /.build/build: line 3159: umount: command not found [ 249s] ... saving built packages [ 249s] /home/abuild/rpmbuild/RPMS/armv7l/popt-1.16-3.2.armv7l.rpm [ 249s] /home/abuild/rpmbuild/RPMS/armv7l/popt-debuginfo-1.16-3.2.armv7l.rpm [ 249s] /home/abuild/rpmbuild/RPMS/armv7l/popt-debugsource-1.16-3.2.armv7l.rpm [ 249s] /home/abuild/rpmbuild/RPMS/armv7l/popt-devel-1.16-3.2.armv7l.rpm [ 249s] /home/abuild/rpmbuild/SRPMS/popt-1.16-3.2.src.rpm [ 249s] /home/abuild/rpmbuild/OTHER/_statistics [ 249s] [ 249s] w13 finished "build popt.spec" at Wed Feb 4 04:01:32 UTC 2015. [ 249s] [ 253s] [ 226.541591] SysRq : Power Off [ 253s] [ 226.549106] Power down. [ 254s] build: extracting built packages... [ 254s] popt-1.16-3.2.armv7l.rpm [ 254s] popt-debuginfo-1.16-3.2.armv7l.rpm [ 254s] popt-debugsource-1.16-3.2.armv7l.rpm [ 254s] popt-devel-1.16-3.2.armv7l.rpm [ 254s] popt-1.16-3.2.src.rpm [ 254s] _statistics Retried build at Tue Feb 3 21:44:42 2015 returned same result, skipped Retried build at Tue Feb 3 23:06:43 2015 returned same result, skipped Retried build at Wed Feb 4 00:09:40 2015 returned same result, skipped Retried build at Wed Feb 4 02:47:32 2015 returned same result, skipped