[ 0s] Using BUILD_ROOT=/srv/build/root_8/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_8/root [ 0s] [ 0s] [ 0s] w12 started "build _service:gbs:python-pycurl.spec" at Fri Feb 6 05:09:24 UTC 2015. [ 0s] [ 0s] Building python-pycurl for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '08b675775b2d3b55a3ff6a10f7c02a9b' [ 0s] [ 0s] processing specfile /srv/build/root_8/.build-srcdir/_service:gbs:python-pycurl.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_8/.build-srcdir/_service:gbs:python-pycurl.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/8/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_8/.build.rpmlist /srv/build/root_8/.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 3s] [5/57] preinstalling eglibc... [ 3s] [6/57] preinstalling eglibc-common... [ 3s] [7/57] preinstalling bash... [ 3s] [8/57] preinstalling bzip2-libs... [ 3s] [9/57] preinstalling diffutils... [ 3s] [10/57] preinstalling elfutils-libelf... [ 3s] [11/57] preinstalling libattr... [ 3s] [12/57] preinstalling liblua... [ 3s] [13/57] preinstalling libstdc++... [ 3s] [14/57] preinstalling ncurses-libs... [ 3s] [15/57] preinstalling nspr... [ 3s] [16/57] preinstalling nss-softokn-freebl... [ 3s] [17/57] preinstalling popt... [ 3s] [18/57] preinstalling readline... [ 3s] [19/57] preinstalling sed... [ 3s] [20/57] preinstalling sqlite... [ 3s] [21/57] preinstalling tar... [ 3s] [22/57] preinstalling xz-libs... [ 3s] [23/57] preinstalling zlib... [ 3s] [24/57] preinstalling qemu.x86_64... [ 4s] [25/57] preinstalling libcap... [ 4s] [26/57] preinstalling libacl... [ 4s] [27/57] preinstalling libfile... [ 4s] [28/57] preinstalling bzip2... [ 4s] [29/57] preinstalling nss... [ 4s] [30/57] preinstalling file... [ 4s] [31/57] preinstalling coreutils... [ 4s] [32/57] preinstalling rpm-libs... [ 4s] [33/57] preinstalling tizen-accelerator... [ 4s] [34/57] preinstalling rpm... [ 4s] [35/57] preinstalling gmp-x86-arm... [ 4s] [36/57] preinstalling mpc-x86-arm... [ 4s] [37/57] preinstalling mpfr-x86-arm... [ 4s] [38/57] preinstalling bzip2-libs-x86-arm... [ 4s] [39/57] preinstalling eglibc-x86-arm... [ 4s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 4s] [41/57] preinstalling libacl-x86-arm... [ 4s] [42/57] preinstalling libattr-x86-arm... [ 4s] [43/57] preinstalling libcap-x86-arm... [ 4s] [44/57] preinstalling libfile-x86-arm... [ 4s] [45/57] preinstalling libgcc-x86-arm... [ 4s] [46/57] preinstalling liblua-x86-arm... [ 4s] [47/57] preinstalling ncurses-libs-x86-arm... [ 4s] [48/57] preinstalling nspr-x86-arm... [ 5s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 5s] [50/57] preinstalling nss-x86-arm... [ 5s] [51/57] preinstalling popt-x86-arm... [ 5s] [52/57] preinstalling rpm-libs-x86-arm... [ 5s] [53/57] preinstalling sqlite-x86-arm... [ 5s] [54/57] preinstalling xz-libs-x86-arm... [ 5s] [55/57] preinstalling zlib-x86-arm... [ 5s] [56/57] preinstalling bash-x86-arm... [ 5s] [57/57] preinstalling rpm-x86-arm... [ 5s] [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl-libs -> perl [ 5s] [1/8] preinstalling e2fsprogs-libs... [ 5s] [2/8] preinstalling libpcre... [ 5s] [3/8] preinstalling libuuid... [ 5s] [4/8] preinstalling grep... [ 5s] [5/8] preinstalling libblkid... [ 5s] [6/8] preinstalling util-linux... [ 5s] [7/8] preinstalling perl-libs... [ 5s] [8/8] preinstalling perl... [ 5s] copying packages... [ 6s] reordering...cycle: bash -> eglibc -> eglibc-common [ 6s] breaking dependency eglibc-common -> bash [ 6s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 6s] breaking dependency eglibc-common -> coreutils [ 6s] cycle: eglibc -> eglibc-common [ 6s] breaking dependency eglibc-common -> eglibc [ 6s] cycle: eglibc -> eglibc-common -> findutils [ 6s] breaking dependency eglibc-common -> findutils [ 6s] cycle: eglibc -> eglibc-common -> grep [ 6s] breaking dependency grep -> eglibc [ 6s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 6s] breaking dependency grep -> libgcc [ 6s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 6s] breaking dependency libpcre -> eglibc [ 6s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 6s] breaking dependency libpcre -> libgcc [ 6s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 6s] breaking dependency libstdc++ -> eglibc [ 6s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 6s] breaking dependency eglibc-common -> grep [ 6s] cycle: eglibc -> eglibc-common -> libgcc [ 6s] breaking dependency eglibc -> eglibc-common [ 6s] cycle: eglibc -> libgcc [ 6s] breaking dependency libgcc -> eglibc [ 6s] cycle: filesystem -> setup [ 6s] breaking dependency setup -> filesystem [ 6s] cycle: ncurses -> ncurses-libs [ 6s] breaking dependency ncurses-libs -> ncurses [ 6s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 6s] breaking dependency ncurses-libs -> ncurses-base [ 6s] cycle: perl -> perl-libs [ 6s] breaking dependency perl -> perl-libs [ 6s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 6s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 6s] cycle: perl -> perl-IO-Compress-Zlib [ 6s] breaking dependency perl -> perl-IO-Compress-Zlib [ 6s] cycle: perl -> perl-IO-Compress-Base [ 6s] breaking dependency perl -> perl-IO-Compress-Base [ 6s] cycle: perl -> perl-Module-Pluggable [ 6s] breaking dependency perl -> perl-Module-Pluggable [ 6s] cycle: perl -> perl-Pod-Simple [ 6s] breaking dependency perl -> perl-Pod-Simple [ 6s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 6s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 6s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 6s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 6s] cycle: dbus -> dbus-libs [ 6s] breaking dependency dbus -> dbus-libs [ 6s] cycle: nss -> nss-sysinit [ 6s] breaking dependency nss -> nss-sysinit [ 6s] cycle: perl-CPAN -> perl-Test-Harness [ 6s] breaking dependency perl-Test-Harness -> perl-CPAN [ 6s] cycle: rpm-libs -> rpm [ 6s] breaking dependency rpm-libs -> rpm [ 6s] done [ 16s] booting kvm ... [ 16s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_8/root,if=virtio,cache=none -drive file=/srv/build/root_8/root,if=ide,index=0,cache=none -drive file=/srv/build/root_8/swap,if=virtio,cache=none -smp 4 [ 19s] [ 0.000000] tsc: Fast TSC calibration failed [ 19s] doing fast boot [ 20s] Creating device nodes with udev [ 29s] Waiting for device /dev/vda to appear: ok [ 29s] fsck from util-linux 2.21.2 [ 29s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 29s] /dev/vda: clean, 4754/2392064 files, 241151/9568256 blocks [ 29s] fsck succeeded. Mounting root device read-write. [ 29s] Mounting root /dev/vda [ 29s] mount -o rw -t ext4 /dev/vda /root [ 29s] replacing /etc/mtab with symlink to /proc/self/mounts [ 29s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 31s] 2nd stage started in virtual machine [ 31s] machine type: armv7l [ 31s] switching personality to 8... [ 31s] 2nd stage started in virtual machine [ 31s] machine type: armv7l [ 31s] /.build/build: line 770: mount: command not found [ 31s] swapon on /dev/vdb [ 31s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 31s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 32s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 32s] logging output to //.build.log... [ 32s] processing specfile /.build-srcdir/_service:gbs:python-pycurl.spec ... [ 32s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:python-pycurl.spec build rpmlint-Factory ... [ 48s] running rpm-x86-arm postinstall script [ 49s] running rpm-libs-x86-arm postinstall script [ 50s] running tizen-accelerator postinstall script [ 51s] running bash-x86-arm postinstall script [ 52s] initializing rpm db... [ 64s] [1/173] installing cross-armv7l-platformfile-0.0.1-3.1 [ 64s] [2/173] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 65s] [3/173] installing libX11-common-1.5.0-3.1 [ 66s] [4/173] installing tizen-release-2.2.0-3.1 [ 67s] [5/173] installing tzdata-2013h-3.1 [ 67s] [6/173] installing libgcc-4.6.4-3.14 [ 68s] [7/173] installing setup-0.1-3.1 [ 68s] [8/173] installing filesystem-0.1-3.1 [ 69s] warning: group lock does not exist - using root [ 69s] [9/173] installing eglibc-2.13-3.9 [ 70s] [10/173] installing libstdc++-4.6.4-3.14 [ 71s] [11/173] installing eglibc-common-2.13-3.9 [ 87s] [12/173] installing libstdc++-devel-4.6.4-3.14 [ 87s] [13/173] installing bash-4.1-3.1 [ 88s] [14/173] installing bzip2-libs-1.0.5-3.2 [ 88s] [15/173] installing c-ares-1.10.0_4-3.1 [ 89s] [16/173] installing capi-base-common-0.1.7-3.1 [ 89s] [17/173] installing check-0.9.4-3.1 [ 90s] [18/173] installing cpio-2.8-3.1 [ 90s] [19/173] installing diffutils-3.0-3.1 [ 91s] [20/173] installing e2fsprogs-libs-1.41.9-3.1 [ 91s] [21/173] installing elfutils-libelf-0.152-3.8 [ 92s] [22/173] installing expat-2.0.1-3.2 [ 92s] [23/173] installing fdupes-1.40-3.1 [ 92s] [24/173] installing findutils-4.2.31-3.1 [ 93s] [25/173] installing gdbm-1.8.3-3.3 [ 93s] [26/173] installing libXau-1.0.7-3.1 [ 93s] [27/173] installing libattr-2.4.44-3.4 [ 94s] [28/173] installing libffi-3.0.9-3.1 [ 95s] [29/173] installing libgomp-4.6.4-3.14 [ 95s] [30/173] installing libidn-1.15-3.1 [ 97s] [31/173] installing liblua-5.1.4-3.2 [ 98s] [32/173] installing libuuid-2.20.2-3.1 [ 98s] [33/173] installing lzo-2.03-3.3 [ 99s] [34/173] installing m4-1.4.14-3.1 [ 99s] [35/173] installing net-tools-1.60-3.1 [ 99s] [36/173] installing nspr-4.9-3.6 [ 100s] [37/173] installing nss-softokn-freebl-3.12.9-3.11 [ 100s] [38/173] installing openssl-1.0.1k-3.2 [ 101s] [39/173] installing patch-2.6-3.1 [ 101s] [40/173] installing pkg-config-0.25-2.2 [ 102s] [41/173] installing popt-1.16-3.2 [ 103s] [42/173] installing readline-5.2-3.2 [ 111s] [43/173] installing sed-4.1.5-3.1 [ 111s] [44/173] installing smack-1.0+s14-5.1 [ 112s] [45/173] installing sqlite-3.7.13-3.2 [ 112s] [46/173] installing tar-1.17-3.2 [ 112s] [47/173] installing xz-libs-5.0.3-3.3 [ 113s] [48/173] installing zlib-1.2.5-3.8 [ 114s] [49/173] installing gmp-4.2.1-3.2 [ 114s] [50/173] installing libpcre-7.7-3.3 [ 115s] [51/173] installing ncurses-libs-5.7-3.2 [ 115s] [52/173] installing build-compare-2009.10.14-3.5 [ 116s] [53/173] installing qemu.x86_64-1.2-5.1 [ 120s] [54/173] installing c-ares-devel-1.10.0_4-3.1 [ 121s] [55/173] installing capi-base-common-devel-0.1.7-3.1 [ 121s] [56/173] installing check-devel-0.9.4-3.1 [ 121s] [57/173] installing eglibc-headers-2.13-3.9 [ 122s] [58/173] installing libcap-2.21-3.2 [ 122s] [59/173] installing openssl-devel-1.0.1k-3.2 [ 123s] [60/173] installing unzip-6.0-3.4 [ 123s] [61/173] installing zlib-devel-1.2.5-3.8 [ 125s] [62/173] installing grep-2.5.1a-3.1 [ 125s] [63/173] installing libacl-2.2.49-3.2 [ 126s] [64/173] installing libfile-5.04-3.2 [ 127s] [65/173] installing libpython-2.7.1-3.3 [ 127s] [66/173] installing libxcb-1.8.1-3.1 [ 128s] [67/173] installing lzo-minilzo-2.03-3.3 [ 128s] [68/173] installing make-3.82-3.2 [ 139s] [69/173] installing mpfr-3.0.0-3.2 [ 140s] [70/173] installing ncurses-5.7-3.2 [ 140s] [71/173] installing bzip2-1.0.5-3.2 [ 141s] [72/173] installing glib2-2.32.3-3.1 [ 142s] [73/173] installing libblkid-2.20.2-3.1 [ 142s] [74/173] installing smack-utils-1.0+s14-5.1 [ 144s] [75/173] installing spindly-0.0.9-3.1 [ 145s] [76/173] installing xz-5.0.3-3.3 [ 146s] [77/173] installing binutils-2.22-3.4 [ 147s] [78/173] installing elfutils-libs-0.152-3.8 [ 148s] [79/173] installing libcurl-7.28.1_26-3.1 [ 149s] [80/173] installing nss-3.12.9-3.11 [ 150s] [81/173] installing perl-5.12.1-3.3 [ 187s] [82/173] installing ncurses-base-5.7-3.2 [ 188s] [83/173] installing perl-HTML-Tagset-3.20-3.1 [ 188s] [84/173] installing perl-IO-Compress-Base-2.008-3.3 [ 189s] [85/173] installing perl-Module-Pluggable-3.60-3.3 [ 190s] [86/173] installing perl-Pod-Escapes-1.04-3.3 [ 190s] [87/173] installing perl-TimeDate-1.20-3.1 [ 191s] [88/173] installing eglibc-devel-2.13-3.9 [ 192s] [89/173] installing file-5.04-3.2 [ 192s] [90/173] installing lzo-devel-2.03-3.3 [ 193s] [91/173] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 194s] [92/173] installing perl-devel-5.12.1-3.3 [ 196s] [93/173] installing perl-libs-5.12.1-3.3 [ 198s] [94/173] installing coreutils-6.9-3.3 [ 201s] [95/173] installing libX11-1.5.0-3.1 [ 204s] [96/173] installing libdlog-0.4.1-3.1 [ 204s] [97/173] installing libmount-2.20.2-3.1 [ 205s] [98/173] installing mpc-0.9-3.2 [ 205s] [99/173] installing spindly-devel-0.0.9-3.1 [ 206s] [100/173] installing xz-lzma-compat-5.0.3-3.3 [ 206s] [101/173] installing elfutils-0.152-3.8 [ 208s] [102/173] installing nss-sysinit-3.12.9-3.11 [ 209s] [103/173] installing python-base-2.7.1-3.3 [ 209s] [104/173] installing rpm-libs-4.9.1-4.1 [ 209s] [105/173] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 210s] [106/173] installing perl-Pod-Simple-3.07-3.3 [ 210s] [107/173] installing perl-Test-Simple-0.80-3.3 [ 210s] [108/173] installing tizen-accelerator-1.0.1-3.1 [ 210s] [109/173] installing libdlog-devel-0.4.1-3.1 [ 211s] [110/173] installing libidn-devel-1.15-3.1 [ 211s] [111/173] installing perl-IO-Compress-Zlib-2.008-3.3 [ 211s] [112/173] installing perl-Test-Harness-3.12-3.3 [ 211s] [113/173] installing gawk-3.1.5-3.2 [ 211s] [114/173] installing gzip-1.3.12-3.1 [ 212s] [115/173] installing build-2011.01.10a-3.1 [ 212s] [116/173] installing python-devel-2.7.1-3.3 [ 212s] [117/173] installing rpm-4.9.1-4.1 [ 213s] [118/173] installing cpp-4.6.4-3.14 [ 213s] [119/173] installing dbus-1.6.4-3.1 [ 213s] [120/173] installing util-linux-2.20.2-3.1 [ 214s] [121/173] installing glib2-devel-2.32.3-3.1 [ 214s] [122/173] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 215s] [123/173] installing dbus-libs-1.6.4-3.1 [ 215s] [124/173] installing eglibc-x86-arm-2.13-2.3 [ 216s] [125/173] installing elfutils-libelf-x86-arm-0.152-2.1 [ 216s] [126/173] installing elfutils-libs-x86-arm-0.152-2.3 [ 217s] [127/173] installing gmp-x86-arm-4.2.1-2.1 [ 217s] [128/173] installing libacl-x86-arm-2.2.49-2.1 [ 217s] [129/173] installing libattr-x86-arm-2.4.44-2.1 [ 218s] [130/173] installing libcap-x86-arm-2.21-2.1 [ 218s] [131/173] installing libfile-x86-arm-5.04-2.2 [ 218s] [132/173] installing libgcc-x86-arm-4.6.4-2.1 [ 219s] [133/173] installing liblua-x86-arm-5.1.4-2.1 [ 219s] [134/173] installing mpc-x86-arm-0.9-2.1 [ 219s] [135/173] installing mpfr-x86-arm-3.0.0-2.1 [ 220s] [136/173] installing ncurses-libs-x86-arm-5.7-2.2 [ 220s] [137/173] installing nspr-x86-arm-4.9-2.3 [ 221s] [138/173] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 221s] [139/173] installing nss-x86-arm-3.12.9-2.3 [ 222s] [140/173] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 223s] [141/173] installing popt-x86-arm-1.16-2.1 [ 223s] [142/173] installing rpm-libs-x86-arm-4.9.1-2.2 [ 224s] [143/173] installing sqlite-x86-arm-3.7.13-2.1 [ 224s] [144/173] installing xz-libs-x86-arm-5.0.3-2.1 [ 224s] [145/173] installing zlib-x86-arm-1.2.5-2.1 [ 225s] [146/173] installing libcurl-devel-7.28.1_26-3.1 [ 225s] [147/173] installing gcc-4.6.4-3.14 [ 226s] [148/173] installing rpm-build-4.9.1-4.1 [ 226s] [149/173] installing dbus-devel-1.6.4-3.1 [ 227s] [150/173] installing perl-CPAN-1.9205-3.3 [ 227s] [151/173] installing bash-x86-arm-4.1-2.1 [ 228s] [152/173] installing dbus-glib-0.100-3.1 [ 228s] [153/173] installing fdupes-x86-arm-1.40-2.1 [ 229s] [154/173] installing findutils-x86-arm-4.2.31-2.1 [ 229s] [155/173] installing gawk-x86-arm-3.1.5-2.2 [ 229s] [156/173] installing gzip-x86-arm-1.3.12-2.1 [ 229s] [157/173] installing make-x86-arm-3.82-2.1 [ 230s] [158/173] installing sed-x86-arm-4.1.5-2.1 [ 230s] [159/173] installing tar-x86-arm-1.17-2.2 [ 230s] [160/173] installing diffutils-x86-arm-3.0-2.1 [ 231s] [161/173] installing patch-x86-arm-2.6-2.1 [ 231s] [162/173] installing autoconf-2.68-3.1 [ 232s] [163/173] installing coreutils-x86-arm-6.9-2.1 [ 234s] [164/173] installing file-x86-arm-5.04-2.1 [ 234s] [165/173] installing elfutils-x86-arm-0.152-2.3 [ 234s] [166/173] installing gcc-c++-4.6.4-3.14 [ 235s] [167/173] installing rpm-x86-arm-4.9.1-2.2 [ 237s] /bin/rpm.orig-arm already present - skipping. [ 237s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 237s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 237s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 237s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 237s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 237s] [168/173] installing rpm-build-x86-arm-4.9.1-2.2 [ 237s] [169/173] installing automake-1.11.1-3.1 [ 238s] [170/173] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 240s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 240s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 241s] [171/173] installing dbus-glib-devel-0.100-3.1 [ 241s] [172/173] installing libtool-2.2.6b-3.2 [ 241s] [173/173] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 242s] removing nis flags from //etc/nsswitch.conf... [ 242s] now finalizing build dir... [ 242s] /.build/build: line 2585: mount: command not found [ 242s] /.build/build: line 2586: mount: command not found [ 244s] Warning: spec file parser line 16: can't expand %(...) [ 244s] Warning: spec file parser line 36: can't expand %(...) [ 244s] Warning: spec file parser line 70: can't expand %(...) [ 244s] Warning: spec file parser line 71: can't expand %(...) [ 246s] build target is armv7l-tizen-linux [ 246s] ----------------------------------------------------------------- [ 246s] I have the following modifications for python-pycurl.spec: [ 246s] 6c6 [ 246s] < Release: 4 [ 246s] --- [ 246s] > Release: 3.2 [ 246s] 71a72 [ 246s] > %changelog [ 246s] ----------------------------------------------------------------- [ 246s] ----- building python-pycurl.spec (user abuild) [ 246s] ----------------------------------------------------------------- [ 246s] ----------------------------------------------------------------- [ 247s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/08b675775b2d3b55a3ff6a10f7c02a9b-python-pycurl' /home/abuild/rpmbuild/SOURCES/python-pycurl.spec [ 247s] sh: @__ID_U@: command not found [ 248s] Building target platforms: armv7l-tizen-linux [ 248s] Building for target armv7l-tizen-linux [ 248s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.77yIj9 [ 248s] + umask 022 [ 248s] + cd /home/abuild/rpmbuild/BUILD [ 248s] + LANG=C [ 248s] + export LANG [ 248s] + unset DISPLAY [ 248s] + cd /home/abuild/rpmbuild/BUILD [ 248s] + rm -rf pycurl-7.19.0 [ 248s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/pycurl-7.19.0.tar.gz [ 248s] + /bin/tar -xf - [ 248s] + STATUS=0 [ 248s] + '[' 0 -ne 0 ']' [ 248s] + cd pycurl-7.19.0 [ 248s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 248s] + echo 'Patch #0 (python-pycurl-no-static-libs.patch):' [ 248s] Patch #0 (python-pycurl-no-static-libs.patch): [ 248s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-no-static-libs.patch [ 248s] + /usr/bin/patch -s -p0 --fuzz=2 [ 248s] + echo 'Patch #1 (python-pycurl-lcrypto.patch):' [ 248s] Patch #1 (python-pycurl-lcrypto.patch): [ 248s] + /bin/cat /home/abuild/rpmbuild/SOURCES/python-pycurl-lcrypto.patch [ 248s] + /usr/bin/patch -s -p1 -b --suffix .lcrypto --fuzz=2 [ 248s] + chmod a-x examples/basicfirst.py examples/file_upload.py examples/linksys.py examples/retriever-multi.py examples/retriever.py examples/sfquery.py examples/xmlrpc_curl.py [ 248s] + exit 0 [ 248s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KrTlTg [ 248s] + umask 022 [ 248s] + cd /home/abuild/rpmbuild/BUILD [ 248s] + cd pycurl-7.19.0 [ 248s] + LANG=C [ 248s] + export LANG [ 248s] + unset DISPLAY [ 248s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 248s] + export CFLAGS [ 248s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 248s] + export CXXFLAGS [ 248s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 248s] + export FFLAGS [ 248s] + LD_AS_NEEDED=1 [ 248s] + export LD_AS_NEEDED [ 248s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL' [ 248s] + /usr/bin/python setup.py build [ 250s] Using curl-config (libcurl 7.28.1) [ 250s] running build [ 250s] running build_py [ 250s] creating build [ 250s] creating build/lib.linux-armv7l-2.7 [ 250s] creating build/lib.linux-armv7l-2.7/curl [ 250s] copying python/curl/__init__.py -> build/lib.linux-armv7l-2.7/curl [ 250s] running build_ext [ 250s] building 'pycurl' extension [ 250s] creating build/temp.linux-armv7l-2.7 [ 250s] creating build/temp.linux-armv7l-2.7/src [ 250s] gcc -pthread -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL -fPIC -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_OPENSSL=1 -DHAVE_CURL_SSL=1 -I/usr/include/python2.7 -c src/pycurl.c -o build/temp.linux-armv7l-2.7/src/pycurl.o [ 250s] src/pycurl.c: In function 'multi_socket_callback': [ 250s] src/pycurl.c:2351:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] [ 251s] src/pycurl.c:2355:11: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [enabled by default] [ 251s] src/pycurl.c: In function 'do_multi_info_read': [ 251s] src/pycurl.c:2843:15: warning: call to '_curl_easy_getinfo_err_string' declared with attribute warning: curl_easy_getinfo expects a pointer to char * for this info [enabled by default] [ 251s] In function 'util_curl_unsetopt', [ 251s] inlined from 'do_curl_unsetopt' at src/pycurl.c:1551:5: [ 251s] src/pycurl.c:1476:9: warning: call to '_curl_easy_setopt_err_CURLSH' declared with attribute warning: curl_easy_setopt expects a CURLSH* argument for this option [enabled by default] [ 252s] gcc -pthread -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -DHAVE_CURL_OPENSSL build/temp.linux-armv7l-2.7/src/pycurl.o -L/usr/lib -lcurl -lcares -lidn -lssl -lcrypto -lrt -lssl -lcrypto -lz -lcrypto -lpython2.7 -o build/lib.linux-armv7l-2.7/pycurl.so [ 252s] + exit 0 [ 252s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.1m5TzA [ 252s] + umask 022 [ 252s] + cd /home/abuild/rpmbuild/BUILD [ 252s] + cd pycurl-7.19.0 [ 252s] + LANG=C [ 252s] + export LANG [ 252s] + unset DISPLAY [ 252s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 252s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 252s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 252s] + /usr/bin/python setup.py install -O1 --skip-build --root /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm --prefix /usr [ 253s] Using curl-config (libcurl 7.28.1) [ 253s] running install [ 253s] running install_lib [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7 [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages [ 253s] copying build/lib.linux-armv7l-2.7/pycurl.so -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages [ 253s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages/curl [ 253s] copying build/lib.linux-armv7l-2.7/curl/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages/curl [ 253s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages/curl/__init__.py to __init__.pyc [ 254s] writing byte-compilation script '/tmp/tmp3ay5RU.py' [ 255s] /usr/bin/python -O /tmp/tmp3ay5RU.py [ 256s] removing /tmp/tmp3ay5RU.py [ 256s] running install_data [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying ChangeLog -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying COPYING -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying COPYING2 -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying INSTALL -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying README -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] copying TODO -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] copying doc/pycurl.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] copying doc/curlshareobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] copying doc/curlmultiobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] copying doc/curlobject.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] copying doc/callbacks.html -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/html [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/retriever-multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/linksys.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/sfquery.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/file_upload.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/basicfirst.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/retriever.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] copying examples/xmlrpc_curl.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/examples [ 256s] creating /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_post2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi_socket.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_socketopen.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi4.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_getinfo.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi_socket_select.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi5.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/util.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_ftp.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_internals.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi_timer.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_post.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_cb.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_gtk.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_xmlrpc.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi6.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_debug.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi2.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_share.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_memleak.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_multi_vs_thread.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_post3.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] copying tests/test_stringio.py -> /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/share/doc/pycurl/tests [ 256s] running install_egg_info [ 256s] Writing /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages/pycurl-7.19.0-py2.7.egg-info [ 256s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/pycurl-7.19.0 [ 256s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm/usr/lib/python2.7/site-packages/pycurl.so [ 257s] 246 blocks [ 258s] + /usr/lib/rpm/check-buildroot [ 258s] + /usr/lib/rpm//brp-compress [ 258s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 258s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 258s] + /usr/lib/rpm/brp-python-hardlink [ 258s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 258s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.SPffTj [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd pycurl-7.19.0 [ 258s] + unset DISPLAY [ 258s] + export 'PYTHONPATH=/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 258s] + PYTHONPATH='/home/abuild/rpmbuild/BUILD/pycurl-7.19.0/build/lib*' [ 258s] + /usr/bin/python tests/test_internals.py -q [ 260s] gc: collectable [ 260s] gc: collectable [ 260s] gc: collectable [ 260s] gc: collectable [ 260s] Python 2.7.1 (r271:86832, Feb 02 2015, 10:52:31) [GCC] [ 260s] PycURL libcurl/7.28.1 OpenSSL/1.0.1k zlib/1.2.5 c-ares/1.10.0 libidn/1.15 (compiled against 0x71c01) [ 260s] PycURL version info (3, '7.28.1', 465921, 'armv7l-unknown-linux-gnueabi', 59100, 'OpenSSL/1.0.1k', 0, '1.2.5', ('dict', 'file', 'ftp', 'ftps', 'gopher', 'http', 'https', 'imap', 'imaps', 'pop3', 'pop3s', 'rtsp', 'smtp', 'smtps', 'telnet', 'tftp'), '1.10.0', 68096, '1.15') [ 260s] build/lib.linux-armv7l-2.7/pycurl.so, compiled Feb 6 2015 05:13:34 [ 260s] All tests passed. [ 260s] + exit 0 [ 260s] Processing files: python-pycurl-7.19.0-3.2.armv7l [ 260s] Provides: pycurl = 7.19.0-3.2 pycurl.so [ 260s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 260s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libcurl.so.4 libcurl.so.4(CURL_OPENSSL_4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) libpython2.7.so.1.0 python(abi) = 2.7 [ 260s] Processing files: python-pycurl-debuginfo-7.19.0-3.2.armv7l [ 260s] Processing files: python-pycurl-debugsource-7.19.0-3.2.armv7l [ 260s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 260s] Wrote: /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-3.2.src.rpm [ 260s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-3.2.armv7l.rpm [ 260s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-3.2.armv7l.rpm [ 260s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-3.2.armv7l.rpm [ 260s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Zv5rQr [ 260s] + umask 022 [ 260s] + cd /home/abuild/rpmbuild/BUILD [ 260s] + cd pycurl-7.19.0 [ 260s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 260s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python-pycurl-7.19.0-3.2.arm [ 260s] + exit 0 [ 260s] ... checking for files with abuild user/group [ 260s] ... creating baselibs [ 261s] ... comparing built packages with the former built [ 261s] /usr/lib/build/rpm-check.sh [ 261s] compare /.build.oldpackages/python-pycurl-7.19.0-3.1.src.rpm /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-3.2.src.rpm [ 262s] compare /.build.oldpackages/python-pycurl-7.19.0-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-3.2.armv7l.rpm [ 263s] /usr/lib/python2.7/site-packages/pycurl.so differs in ELF sections [ 263s] --- /tmp/tmp.rblpvc9nAl 2015-02-06 05:13:46.910481851 +0000 [ 263s] +++ /tmp/tmp.L2xenku1ge 2015-02-06 05:13:46.922481851 +0000 [ 263s] @@ -3,8 +3,8 @@ [ 263s] [ 263s] Contents of section .note.gnu.build-id: [ 263s] 00f4 04000000 14000000 03000000 474e5500 ............GNU. [ 263s] - 0104 f6daa03d 8413026b c73f121f e582cc33 ...=...k.?.....3 [ 263s] - 0114 7543017a uC.z [ 263s] + 0104 f02361e1 f79647da f6dee430 6ab1ea47 .#a...G....0j..G [ 263s] + 0114 a7ded789 .... [ 263s] Contents of section .hash: [ 263s] 0118 83000000 86000000 5d000000 70000000 ........]...p... [ 263s] 0128 00000000 00000000 0d000000 56000000 ............V... [ 263s] @@ -2374,7 +2374,7 @@ [ 263s] 9404 6375726c 6f626a65 63745f63 6f6e7374 curlobject_const [ 263s] 9414 616e7473 20213d20 2828766f 6964202a ants != ((void * [ 263s] 9424 29302900 76657273 696f6e00 46656220 )0).version.Feb [ 263s] - 9434 20342032 30313520 31323a34 303a3230 4 2015 12:40:20 [ 263s] + 9434 20362032 30313520 30353a31 333a3334 6 2015 05:13:34 [ 263s] 9444 00000000 434f4d50 494c455f 44415445 ....COMPILE_DATE [ 263s] 9454 00000000 434f4d50 494c455f 50595f56 ....COMPILE_PY_V [ 263s] 9464 45525349 4f4e5f48 45580000 434f4d50 ERSION_HEX..COMP [ 263s] @@ -3048,4 +3048,4 @@ [ 263s] 0030 0222012c 01 .".,. [ 263s] Contents of section .gnu_debuglink: [ 263s] 0000 70796375 726c2e73 6f2e6465 62756700 pycurl.so.debug. [ 263s] - 0010 884765ad .Ge. [ 263s] + 0010 b9959f19 .... [ 263s] compare /.build.oldpackages/python-pycurl-debuginfo-7.19.0-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-3.2.armv7l.rpm [ 263s] --- /tmp/tmp.gFjnXneP4F 2015-02-06 05:13:47.086481856 +0000 [ 263s] +++ /tmp/tmp.aR1VOJpTfi 2015-02-06 05:13:47.098481857 +0000 [ 263s] @@ -1,8 +1,8 @@ [ 263s] /usr/lib/debug/ 0 (none) 40755 root root 0 4294967295 [ 263s] /usr/lib/debug/.build-id/ 0 (none) 40755 root root 0 4294967295 [ 263s] -/usr/lib/debug/.build-id/f6/ 0 (none) 40755 root root 0 4294967295 [ 263s] -/usr/lib/debug/.build-id/f6/daa03d8413026bc73f121fe582cc337543017a 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so [ 263s] -/usr/lib/debug/.build-id/f6/daa03d8413026bc73f121fe582cc337543017a.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug [ 263s] +/usr/lib/debug/.build-id/f0/ 0 (none) 40755 root root 0 4294967295 [ 263s] +/usr/lib/debug/.build-id/f0/2361e1f79647daf6dee4306ab1ea47a7ded789 0 (none) 120777 root root 0 4294967295 ../../../python2.7/site-packages/pycurl.so [ 263s] +/usr/lib/debug/.build-id/f0/2361e1f79647daf6dee4306ab1ea47a7ded789.debug 0 (none) 120777 root root 0 4294967295 ../../usr/lib/python2.7/site-packages/pycurl.so.debug [ 263s] /usr/lib/debug/usr/ 0 (none) 40755 root root 0 4294967295 [ 263s] /usr/lib/debug/usr/lib/ 0 (none) 40755 root root 0 4294967295 [ 263s] /usr/lib/debug/usr/lib/python2.7/ 0 (none) 40755 root root 0 4294967295 [ 263s] RPM meta information is different [ 263s] compare /.build.oldpackages/python-pycurl-debugsource-7.19.0-3.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-3.2.armv7l.rpm [ 263s] ... saving built statistics [ 263s] /.build/build: line 3144: mount: command not found [ 264s] ERROR: no root disk device found, yet another new device name? [ 264s] ls: cannot access /sys/block/: No such file or directory [ 264s] /.build/build: line 3159: umount: command not found [ 264s] ... saving built packages [ 264s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-7.19.0-3.2.armv7l.rpm [ 264s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debuginfo-7.19.0-3.2.armv7l.rpm [ 264s] /home/abuild/rpmbuild/RPMS/armv7l/python-pycurl-debugsource-7.19.0-3.2.armv7l.rpm [ 264s] /home/abuild/rpmbuild/SRPMS/python-pycurl-7.19.0-3.2.src.rpm [ 264s] /home/abuild/rpmbuild/OTHER/_statistics [ 264s] [ 264s] w12 finished "build python-pycurl.spec" at Fri Feb 6 05:13:48 UTC 2015. [ 264s] [ 271s] [ 252.132670] SysRq : Power Off [ 271s] [ 252.240352] Power down. [ 271s] build: extracting built packages... [ 272s] python-pycurl-7.19.0-3.2.armv7l.rpm [ 272s] python-pycurl-debuginfo-7.19.0-3.2.armv7l.rpm [ 272s] python-pycurl-debugsource-7.19.0-3.2.armv7l.rpm [ 272s] python-pycurl-7.19.0-3.2.src.rpm [ 272s] _statistics