[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w02 started "build _service:gbs:xcb-util.spec" at Wed Feb 4 12:14:35 UTC 2015. [ 0s] [ 0s] Building xcb-util for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '66aab9fb4ed440f53de5dc80e479f3c5' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:xcb-util.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:xcb-util.spec [ 1s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 2s] [18/57] preinstalling readline... [ 2s] [19/57] preinstalling sed... [ 2s] [20/57] preinstalling sqlite... [ 2s] [21/57] preinstalling tar... [ 2s] [22/57] preinstalling xz-libs... [ 2s] [23/57] preinstalling zlib... [ 2s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 3s] [32/57] preinstalling rpm-libs... [ 3s] [33/57] preinstalling tizen-accelerator... [ 3s] [34/57] preinstalling rpm... [ 3s] [35/57] preinstalling gmp-x86-arm... [ 3s] [36/57] preinstalling mpc-x86-arm... [ 3s] [37/57] preinstalling mpfr-x86-arm... [ 3s] [38/57] preinstalling bzip2-libs-x86-arm... [ 3s] [39/57] preinstalling eglibc-x86-arm... [ 3s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 3s] [41/57] preinstalling libacl-x86-arm... [ 3s] [42/57] preinstalling libattr-x86-arm... [ 3s] [43/57] preinstalling libcap-x86-arm... [ 3s] [44/57] preinstalling libfile-x86-arm... [ 3s] [45/57] preinstalling libgcc-x86-arm... [ 3s] [46/57] preinstalling liblua-x86-arm... [ 3s] [47/57] preinstalling ncurses-libs-x86-arm... [ 3s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl-libs -> perl [ 4s] [1/8] preinstalling e2fsprogs-libs... [ 4s] [2/8] preinstalling libpcre... [ 4s] [3/8] preinstalling libuuid... [ 4s] [4/8] preinstalling grep... [ 4s] [5/8] preinstalling libblkid... [ 4s] [6/8] preinstalling util-linux... [ 4s] [7/8] preinstalling perl-libs... [ 4s] [8/8] preinstalling perl... [ 4s] copying packages... [ 5s] reordering...cycle: bash -> eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> bash [ 5s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 5s] breaking dependency eglibc-common -> coreutils [ 5s] cycle: eglibc -> eglibc-common [ 5s] breaking dependency eglibc-common -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> findutils [ 5s] breaking dependency eglibc-common -> findutils [ 5s] cycle: eglibc -> eglibc-common -> grep [ 5s] breaking dependency grep -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 5s] breaking dependency grep -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 5s] breaking dependency libpcre -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 5s] breaking dependency libpcre -> libgcc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 5s] breaking dependency libstdc++ -> eglibc [ 5s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 5s] breaking dependency eglibc-common -> grep [ 5s] cycle: eglibc -> eglibc-common -> libgcc [ 5s] breaking dependency eglibc -> eglibc-common [ 5s] cycle: eglibc -> libgcc [ 5s] breaking dependency libgcc -> eglibc [ 5s] cycle: filesystem -> setup [ 5s] breaking dependency setup -> filesystem [ 5s] cycle: ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses [ 5s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 5s] breaking dependency ncurses-libs -> ncurses-base [ 5s] cycle: perl -> perl-libs [ 5s] breaking dependency perl -> perl-libs [ 5s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 5s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl -> perl-IO-Compress-Zlib [ 5s] breaking dependency perl -> perl-IO-Compress-Zlib [ 5s] cycle: perl -> perl-IO-Compress-Base [ 5s] breaking dependency perl -> perl-IO-Compress-Base [ 5s] cycle: perl -> perl-Module-Pluggable [ 5s] breaking dependency perl -> perl-Module-Pluggable [ 5s] cycle: perl -> perl-Pod-Simple [ 5s] breaking dependency perl -> perl-Pod-Simple [ 5s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 5s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 5s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 5s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 5s] cycle: nss -> nss-sysinit [ 5s] breaking dependency nss -> nss-sysinit [ 5s] cycle: perl-CPAN -> perl-Test-Harness [ 5s] breaking dependency perl-Test-Harness -> perl-CPAN [ 5s] cycle: rpm-libs -> rpm [ 5s] breaking dependency rpm-libs -> rpm [ 5s] done [ 6s] booting kvm ... [ 6s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 8 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 4692/2392064 files, 237341/9568256 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] switching personality to 8... [ 14s] 2nd stage started in virtual machine [ 14s] machine type: armv7l [ 14s] /.build/build: line 770: mount: command not found [ 14s] swapon on /dev/vdb [ 14s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 14s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 15s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 15s] logging output to //.build.log... [ 15s] processing specfile /.build-srcdir/_service:gbs:xcb-util.spec ... [ 15s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xcb-util.spec build rpmlint-Factory ... [ 16s] running rpm-x86-arm postinstall script [ 16s] running rpm-libs-x86-arm postinstall script [ 16s] running tizen-accelerator postinstall script [ 17s] running bash-x86-arm postinstall script [ 17s] initializing rpm db... [ 24s] [1/147] installing cross-armv7l-platformfile-0.0.1-3.1 [ 24s] [2/147] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 24s] [3/147] installing tizen-release-2.2.0-3.1 [ 24s] [4/147] installing tzdata-2013h-3.1 [ 25s] [5/147] installing libgcc-4.6.4-3.14 [ 25s] [6/147] installing setup-0.1-3.1 [ 25s] [7/147] installing filesystem-0.1-3.1 [ 25s] warning: group lock does not exist - using root [ 26s] [8/147] installing eglibc-2.13-3.9 [ 26s] [9/147] installing libstdc++-4.6.4-3.14 [ 26s] [10/147] installing eglibc-common-2.13-3.9 [ 27s] [11/147] installing libstdc++-devel-4.6.4-3.14 [ 27s] [12/147] installing bash-4.1-3.1 [ 27s] [13/147] installing bzip2-libs-1.0.5-3.2 [ 27s] [14/147] installing cpio-2.8-3.1 [ 28s] [15/147] installing diffutils-3.0-3.1 [ 28s] [16/147] installing e2fsprogs-libs-1.41.9-3.1 [ 28s] [17/147] installing elfutils-libelf-0.152-3.8 [ 28s] [18/147] installing fdupes-1.40-3.1 [ 28s] [19/147] installing findutils-4.2.31-3.1 [ 28s] [20/147] installing gdbm-1.8.3-3.3 [ 28s] [21/147] installing libXau-1.0.7-3.1 [ 29s] [22/147] installing libattr-2.4.44-3.4 [ 29s] [23/147] installing libgomp-4.6.4-3.14 [ 29s] [24/147] installing liblua-5.1.4-3.2 [ 29s] [25/147] installing libuuid-2.20.2-3.1 [ 29s] [26/147] installing lzo-2.03-3.3 [ 29s] [27/147] installing m4-1.4.14-3.1 [ 30s] [28/147] installing net-tools-1.60-3.1 [ 30s] [29/147] installing nspr-4.9-3.6 [ 30s] [30/147] installing nss-softokn-freebl-3.12.9-3.11 [ 30s] [31/147] installing patch-2.6-3.1 [ 30s] [32/147] installing pkg-config-0.25-2.2 [ 30s] [33/147] installing popt-1.16-3.2 [ 31s] [34/147] installing readline-5.2-3.2 [ 31s] [35/147] installing sed-4.1.5-3.1 [ 31s] [36/147] installing sqlite-3.7.13-3.2 [ 31s] [37/147] installing tar-1.17-3.2 [ 31s] [38/147] installing xz-libs-5.0.3-3.3 [ 31s] [39/147] installing zlib-1.2.5-3.8 [ 32s] [40/147] installing gmp-4.2.1-3.2 [ 32s] [41/147] installing gperf-3.0.4-3.1 [ 32s] [42/147] installing libpcre-7.7-3.3 [ 32s] [43/147] installing ncurses-libs-5.7-3.2 [ 32s] [44/147] installing build-compare-2009.10.14-3.5 [ 32s] [45/147] installing libpthread-stubs-0.3-3.1 [ 33s] [46/147] installing qemu.x86_64-1.2-5.1 [ 34s] [47/147] installing xorg-x11-proto-core-7.0.25-3.1 [ 35s] [48/147] installing xorg-x11-xutils-dev-7.7-3.1 [ 35s] [49/147] installing eglibc-headers-2.13-3.9 [ 35s] [50/147] installing libcap-2.21-3.2 [ 35s] [51/147] installing unzip-6.0-3.4 [ 35s] [52/147] installing zlib-devel-1.2.5-3.8 [ 35s] [53/147] installing grep-2.5.1a-3.1 [ 35s] [54/147] installing libacl-2.2.49-3.2 [ 36s] [55/147] installing libfile-5.04-3.2 [ 36s] [56/147] installing libxcb-1.8.1-3.1 [ 36s] [57/147] installing lzo-minilzo-2.03-3.3 [ 36s] [58/147] installing make-3.82-3.2 [ 36s] [59/147] installing mpfr-3.0.0-3.2 [ 37s] [60/147] installing ncurses-5.7-3.2 [ 37s] [61/147] installing bzip2-1.0.5-3.2 [ 37s] [62/147] installing libblkid-2.20.2-3.1 [ 38s] [63/147] installing xz-5.0.3-3.3 [ 38s] [64/147] installing binutils-2.22-3.4 [ 38s] [65/147] installing elfutils-libs-0.152-3.8 [ 38s] [66/147] installing nss-3.12.9-3.11 [ 38s] [67/147] installing perl-5.12.1-3.3 [ 40s] [68/147] installing ncurses-base-5.7-3.2 [ 40s] [69/147] installing perl-HTML-Tagset-3.20-3.1 [ 40s] [70/147] installing perl-IO-Compress-Base-2.008-3.3 [ 40s] [71/147] installing perl-Module-Pluggable-3.60-3.3 [ 40s] [72/147] installing perl-Pod-Escapes-1.04-3.3 [ 40s] [73/147] installing perl-TimeDate-1.20-3.1 [ 40s] [74/147] installing eglibc-devel-2.13-3.9 [ 41s] [75/147] installing file-5.04-3.2 [ 41s] [76/147] installing libXau-devel-1.0.7-3.1 [ 41s] [77/147] installing lzo-devel-2.03-3.3 [ 41s] [78/147] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 41s] [79/147] installing perl-devel-5.12.1-3.3 [ 41s] [80/147] installing perl-libs-5.12.1-3.3 [ 42s] [81/147] installing coreutils-6.9-3.3 [ 42s] [82/147] installing libmount-2.20.2-3.1 [ 42s] [83/147] installing mpc-0.9-3.2 [ 42s] [84/147] installing xz-lzma-compat-5.0.3-3.3 [ 42s] [85/147] installing elfutils-0.152-3.8 [ 43s] [86/147] installing nss-sysinit-3.12.9-3.11 [ 43s] [87/147] installing rpm-libs-4.9.1-4.1 [ 43s] [88/147] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 43s] [89/147] installing perl-Pod-Simple-3.07-3.3 [ 43s] [90/147] installing perl-Test-Simple-0.80-3.3 [ 44s] [91/147] installing tizen-accelerator-1.0.1-3.1 [ 44s] [92/147] installing perl-IO-Compress-Zlib-2.008-3.3 [ 44s] [93/147] installing perl-Test-Harness-3.12-3.3 [ 44s] [94/147] installing gawk-3.1.5-3.2 [ 45s] [95/147] installing gzip-1.3.12-3.1 [ 45s] [96/147] installing libxcb-devel-1.8.1-3.1 [ 45s] [97/147] installing build-2011.01.10a-3.1 [ 45s] [98/147] installing rpm-4.9.1-4.1 [ 45s] [99/147] installing cpp-4.6.4-3.14 [ 46s] [100/147] installing util-linux-2.20.2-3.1 [ 46s] [101/147] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 46s] [102/147] installing eglibc-x86-arm-2.13-2.3 [ 47s] [103/147] installing elfutils-libelf-x86-arm-0.152-2.1 [ 47s] [104/147] installing elfutils-libs-x86-arm-0.152-2.3 [ 54s] [105/147] installing gmp-x86-arm-4.2.1-2.1 [ 55s] [106/147] installing libacl-x86-arm-2.2.49-2.1 [ 55s] [107/147] installing libattr-x86-arm-2.4.44-2.1 [ 56s] [108/147] installing libcap-x86-arm-2.21-2.1 [ 56s] [109/147] installing libfile-x86-arm-5.04-2.2 [ 56s] [110/147] installing libgcc-x86-arm-4.6.4-2.1 [ 56s] [111/147] installing liblua-x86-arm-5.1.4-2.1 [ 57s] [112/147] installing mpc-x86-arm-0.9-2.1 [ 57s] [113/147] installing mpfr-x86-arm-3.0.0-2.1 [ 57s] [114/147] installing ncurses-libs-x86-arm-5.7-2.2 [ 57s] [115/147] installing nspr-x86-arm-4.9-2.3 [ 57s] [116/147] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 58s] [117/147] installing nss-x86-arm-3.12.9-2.3 [ 58s] [118/147] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 58s] [119/147] installing popt-x86-arm-1.16-2.1 [ 59s] [120/147] installing rpm-libs-x86-arm-4.9.1-2.2 [ 59s] [121/147] installing sqlite-x86-arm-3.7.13-2.1 [ 59s] [122/147] installing xz-libs-x86-arm-5.0.3-2.1 [ 59s] [123/147] installing zlib-x86-arm-1.2.5-2.1 [ 60s] [124/147] installing gcc-4.6.4-3.14 [ 60s] [125/147] installing rpm-build-4.9.1-4.1 [ 60s] [126/147] installing perl-CPAN-1.9205-3.3 [ 60s] [127/147] installing bash-x86-arm-4.1-2.1 [ 60s] [128/147] installing fdupes-x86-arm-1.40-2.1 [ 61s] [129/147] installing findutils-x86-arm-4.2.31-2.1 [ 61s] [130/147] installing gawk-x86-arm-3.1.5-2.2 [ 61s] [131/147] installing gzip-x86-arm-1.3.12-2.1 [ 61s] [132/147] installing make-x86-arm-3.82-2.1 [ 62s] [133/147] installing sed-x86-arm-4.1.5-2.1 [ 62s] [134/147] installing tar-x86-arm-1.17-2.2 [ 62s] [135/147] installing diffutils-x86-arm-3.0-2.1 [ 63s] [136/147] installing patch-x86-arm-2.6-2.1 [ 66s] [137/147] installing autoconf-2.68-3.1 [ 67s] [138/147] installing coreutils-x86-arm-6.9-2.1 [ 70s] [139/147] installing file-x86-arm-5.04-2.1 [ 70s] [140/147] installing elfutils-x86-arm-0.152-2.3 [ 70s] [141/147] installing gcc-c++-4.6.4-3.14 [ 70s] [142/147] installing rpm-x86-arm-4.9.1-2.2 [ 71s] /bin/rpm.orig-arm already present - skipping. [ 71s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 71s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 71s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 71s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 71s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 71s] [143/147] installing rpm-build-x86-arm-4.9.1-2.2 [ 71s] [144/147] installing automake-1.11.1-3.1 [ 71s] [145/147] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 72s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 72s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 72s] [146/147] installing libtool-2.2.6b-3.2 [ 72s] [147/147] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 74s] removing nis flags from //etc/nsswitch.conf... [ 74s] now finalizing build dir... [ 74s] /.build/build: line 2585: mount: command not found [ 74s] /.build/build: line 2586: mount: command not found [ 80s] build target is armv7l-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] I have the following modifications for xcb-util.spec: [ 80s] 5c5 [ 80s] < Release: slp.1.3 [ 80s] --- [ 80s] > Release: 3.1 [ 80s] ----------------------------------------------------------------- [ 80s] ----- building xcb-util.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 80s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/66aab9fb4ed440f53de5dc80e479f3c5-xcb-util' /home/abuild/rpmbuild/SOURCES/xcb-util.spec [ 80s] Building target platforms: armv7l-tizen-linux [ 80s] Building for target armv7l-tizen-linux [ 80s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.YVQtE3 [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + rm -rf xcb-util-0.3.8 [ 80s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xcb-util-0.3.8.tar.gz [ 80s] + /bin/tar -xf - [ 80s] + STATUS=0 [ 80s] + '[' 0 -ne 0 ']' [ 80s] + cd xcb-util-0.3.8 [ 80s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 80s] + exit 0 [ 80s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.6esxpA [ 80s] + umask 022 [ 80s] + cd /home/abuild/rpmbuild/BUILD [ 80s] + cd xcb-util-0.3.8 [ 80s] + LANG=C [ 80s] + export LANG [ 80s] + unset DISPLAY [ 80s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 80s] + export CFLAGS [ 80s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 80s] + export CXXFLAGS [ 80s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 80s] + export FFLAGS [ 80s] + LD_AS_NEEDED=1 [ 80s] + export LD_AS_NEEDED [ 80s] + ./autogen.sh [ 80s] libtoolize: putting auxiliary files in `.'. [ 80s] libtoolize: linking file `./ltmain.sh' [ 80s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 80s] libtoolize: linking file `m4/libtool.m4' [ 80s] libtoolize: linking file `m4/ltoptions.m4' [ 80s] libtoolize: linking file `m4/ltsugar.m4' [ 80s] libtoolize: linking file `m4/ltversion.m4' [ 80s] libtoolize: linking file `m4/lt~obsolete.m4' [ 80s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 87s] autoreconf: Entering directory `.' [ 87s] autoreconf: configure.ac: not using Gettext [ 88s] autoreconf: running: aclocal -I m4 [ 115s] autoreconf: configure.ac: tracing [ 124s] autoreconf: running: libtoolize --copy [ 124s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 146s] autoreconf: running: /usr/bin/autoconf [ 158s] autoreconf: configure.ac: not using Autoheader [ 158s] autoreconf: running: automake --add-missing --copy --no-force [ 164s] configure.ac:10: installing `./config.guess' [ 164s] configure.ac:10: installing `./config.sub' [ 164s] configure.ac:6: installing `./install-sh' [ 164s] configure.ac:6: installing `./missing' [ 164s] src/Makefile.am: installing `./depcomp' [ 166s] autoreconf: Leaving directory `.' [ 167s] checking for a BSD-compatible install... /usr/bin/install -c [ 168s] checking whether build environment is sane... yes [ 168s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 168s] checking for gawk... gawk [ 168s] checking whether make sets $(MAKE)... yes [ 168s] checking whether to enable maintainer-specific portions of Makefiles... no [ 168s] checking for m4 that supports -I option... /usr/bin/m4 [ 169s] checking build system type... armv7l-unknown-linux-gnueabi [ 169s] checking host system type... armv7l-unknown-linux-gnueabi [ 169s] checking for style of include used by make... GNU [ 169s] checking for gcc... gcc [ 170s] checking whether the C compiler works... yes [ 170s] checking for C compiler default output file name... a.out [ 170s] checking for suffix of executables... [ 172s] checking whether we are cross compiling... no [ 172s] checking for suffix of object files... o [ 172s] checking whether we are using the GNU C compiler... yes [ 173s] checking whether gcc accepts -g... yes [ 173s] checking for gcc option to accept ISO C89... none needed [ 174s] checking dependency style of gcc... gcc3 [ 174s] checking for a sed that does not truncate output... /bin/sed [ 174s] checking for grep that handles long lines and -e... /bin/grep [ 174s] checking for egrep... /bin/grep -E [ 174s] checking for fgrep... /bin/grep -F [ 174s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 174s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 174s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 174s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 174s] checking whether ln -s works... yes [ 174s] checking the maximum length of command line arguments... 1572864 [ 174s] checking whether the shell understands some XSI constructs... yes [ 174s] checking whether the shell understands "+="... yes [ 174s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 174s] checking for objdump... objdump [ 174s] checking how to recognize dependent libraries... pass_all [ 174s] checking for ar... ar [ 174s] checking for strip... strip [ 174s] checking for ranlib... ranlib [ 176s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 177s] checking how to run the C preprocessor... gcc -E [ 177s] checking for ANSI C header files... yes [ 177s] checking for sys/types.h... yes [ 178s] checking for sys/stat.h... yes [ 178s] checking for stdlib.h... yes [ 178s] checking for string.h... yes [ 178s] checking for memory.h... yes [ 178s] checking for strings.h... yes [ 178s] checking for inttypes.h... yes [ 178s] checking for stdint.h... yes [ 178s] checking for unistd.h... yes [ 178s] checking for dlfcn.h... yes [ 178s] checking for objdir... .libs [ 178s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 178s] checking for gcc option to produce PIC... -fPIC -DPIC [ 178s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 178s] checking if gcc static flag -static works... no [ 178s] checking if gcc supports -c -o file.o... yes [ 178s] checking if gcc supports -c -o file.o... (cached) yes [ 178s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 178s] checking whether -lc should be explicitly linked in... no [ 178s] checking dynamic linker characteristics... GNU/Linux ld.so [ 178s] checking how to hardcode library paths into programs... immediate [ 178s] checking whether stripping libraries is possible... yes [ 178s] checking if libtool supports shared libraries... yes [ 178s] checking whether to build shared libraries... yes [ 178s] checking whether to build static libraries... yes [ 178s] checking for pkg-config... /usr/bin/pkg-config [ 178s] checking pkg-config is at least version 0.9.0... yes [ 179s] checking for gcc option to accept ISO C99... -std=gnu99 [ 179s] checking whether __clang__ is declared... no [ 179s] checking whether __INTEL_COMPILER is declared... no [ 179s] checking whether __SUNPRO_C is declared... no [ 179s] checking for XCB... yes [ 179s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 179s] yes [ 179s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 179s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 179s] checking if gcc -std=gnu99 supports-Wall... yes [ 179s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 179s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 179s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 180s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 180s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 180s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 180s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 180s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 180s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 180s] checking if gcc -std=gnu99 supports-Wunused... yes [ 180s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 180s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 180s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 180s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 180s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 180s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 180s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 181s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 181s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 181s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 181s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 181s] checking if gcc -std=gnu99 supports-pedantic... yes [ 181s] checking if gcc -std=gnu99 supports-Werror... yes [ 181s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 181s] checking whether to build developer documentation... yes [ 181s] checking for doxygen... no [ 181s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 181s] checking for gperf... gperf [ 181s] checking for vasprintf... yes [ 181s] checking for ssize_t... yes [ 181s] checking for XPROTO... yes [ 181s] configure: creating ./config.status [ 182s] config.status: creating Makefile [ 182s] config.status: creating src/Makefile [ 182s] config.status: creating xcb-atom.pc [ 182s] config.status: creating xcb-aux.pc [ 182s] config.status: creating xcb-event.pc [ 182s] config.status: creating xcb-util.pc [ 182s] config.status: creating xcb-renderutil.pc [ 182s] config.status: creating xcb_util_intro [ 182s] config.status: executing depfiles commands [ 182s] config.status: executing libtool commands [ 182s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 182s] + export CFLAGS [ 182s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 182s] + export CXXFLAGS [ 182s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 182s] + export FFLAGS [ 182s] + autoreconf -v --install --force [ 189s] autoreconf: Entering directory `.' [ 189s] autoreconf: configure.ac: not using Gettext [ 190s] autoreconf: running: aclocal --force -I m4 [ 215s] autoreconf: configure.ac: tracing [ 224s] autoreconf: running: libtoolize --copy --force [ 224s] libtoolize: putting auxiliary files in `.'. [ 224s] libtoolize: copying file `./ltmain.sh' [ 224s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. [ 224s] libtoolize: copying file `m4/libtool.m4' [ 224s] libtoolize: copying file `m4/ltoptions.m4' [ 224s] libtoolize: copying file `m4/ltsugar.m4' [ 224s] libtoolize: copying file `m4/ltversion.m4' [ 224s] libtoolize: copying file `m4/lt~obsolete.m4' [ 225s] libtoolize: Remember to add `LT_INIT' to configure.ac. [ 250s] autoreconf: running: /usr/bin/autoconf --force [ 265s] autoreconf: configure.ac: not using Autoheader [ 265s] autoreconf: running: automake --add-missing --copy --force-missing [ 273s] autoreconf: Leaving directory `.' [ 273s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 274s] checking for a BSD-compatible install... /usr/bin/install -c [ 275s] checking whether build environment is sane... yes [ 275s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 275s] checking for gawk... gawk [ 275s] checking whether make sets $(MAKE)... yes [ 275s] checking whether to enable maintainer-specific portions of Makefiles... no [ 275s] checking for m4 that supports -I option... /usr/bin/m4 [ 275s] checking build system type... armv7l-unknown-linux-gnueabi [ 275s] checking host system type... armv7l-unknown-linux-gnueabi [ 275s] checking for style of include used by make... GNU [ 275s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 275s] checking for gcc... gcc [ 275s] checking whether the C compiler works... yes [ 275s] checking for C compiler default output file name... a.out [ 275s] checking for suffix of executables... [ 275s] checking whether we are cross compiling... no [ 275s] checking for suffix of object files... o [ 275s] checking whether we are using the GNU C compiler... yes [ 275s] checking whether gcc accepts -g... yes [ 275s] checking for gcc option to accept ISO C89... none needed [ 276s] checking dependency style of gcc... gcc3 [ 276s] checking for a sed that does not truncate output... /bin/sed [ 276s] checking for grep that handles long lines and -e... /bin/grep [ 276s] checking for egrep... /bin/grep -E [ 276s] checking for fgrep... /bin/grep -F [ 276s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 276s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 276s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 276s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 276s] checking whether ln -s works... yes [ 276s] checking the maximum length of command line arguments... 1572864 [ 276s] checking whether the shell understands some XSI constructs... yes [ 276s] checking whether the shell understands "+="... yes [ 276s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 276s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 276s] checking for objdump... objdump [ 276s] checking how to recognize dependent libraries... pass_all [ 276s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 276s] checking for ar... ar [ 276s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 276s] checking for strip... strip [ 276s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 276s] checking for ranlib... ranlib [ 276s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 276s] checking how to run the C preprocessor... gcc -E [ 276s] checking for ANSI C header files... yes [ 276s] checking for sys/types.h... yes [ 276s] checking for sys/stat.h... yes [ 276s] checking for stdlib.h... yes [ 276s] checking for string.h... yes [ 277s] checking for memory.h... yes [ 277s] checking for strings.h... yes [ 277s] checking for inttypes.h... yes [ 277s] checking for stdint.h... yes [ 277s] checking for unistd.h... yes [ 277s] checking for dlfcn.h... yes [ 277s] checking for objdir... .libs [ 277s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 277s] checking for gcc option to produce PIC... -fPIC -DPIC [ 277s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 277s] checking if gcc static flag -static works... no [ 277s] checking if gcc supports -c -o file.o... yes [ 277s] checking if gcc supports -c -o file.o... (cached) yes [ 277s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 277s] checking whether -lc should be explicitly linked in... no [ 277s] checking dynamic linker characteristics... GNU/Linux ld.so [ 277s] checking how to hardcode library paths into programs... immediate [ 277s] checking whether stripping libraries is possible... yes [ 277s] checking if libtool supports shared libraries... yes [ 277s] checking whether to build shared libraries... yes [ 277s] checking whether to build static libraries... no [ 277s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 277s] checking for pkg-config... /usr/bin/pkg-config [ 277s] checking pkg-config is at least version 0.9.0... yes [ 277s] checking for gcc option to accept ISO C99... -std=gnu99 [ 278s] checking whether __clang__ is declared... no [ 278s] checking whether __INTEL_COMPILER is declared... no [ 278s] checking whether __SUNPRO_C is declared... no [ 278s] checking for XCB... yes [ 278s] checking whether libxcb was compiled against xcb-proto >= 1.6... checking for gawk... (cached) gawk [ 278s] yes [ 278s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 278s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 278s] checking if gcc -std=gnu99 supports-Wall... yes [ 278s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 278s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 278s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 278s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 278s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 278s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 278s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 279s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 279s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 279s] checking if gcc -std=gnu99 supports-Wunused... yes [ 279s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 279s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 279s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 279s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 279s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 279s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 279s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 280s] checking if gcc -std=gnu99 supports-pedantic... yes [ 280s] checking if gcc -std=gnu99 supports-Werror... yes [ 280s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 280s] checking whether to build developer documentation... yes [ 280s] checking for doxygen... no [ 280s] configure: WARNING: doxygen not found - documentation targets will be skipped [ 280s] checking for gperf... gperf [ 280s] checking for vasprintf... yes [ 280s] checking for ssize_t... yes [ 280s] checking for XPROTO... yes [ 280s] configure: creating ./config.status [ 281s] config.status: creating Makefile [ 281s] config.status: creating src/Makefile [ 281s] config.status: creating xcb-atom.pc [ 281s] config.status: creating xcb-aux.pc [ 281s] config.status: creating xcb-event.pc [ 281s] config.status: creating xcb-util.pc [ 281s] config.status: creating xcb-renderutil.pc [ 281s] config.status: creating xcb_util_intro [ 281s] config.status: executing depfiles commands [ 281s] config.status: executing libtool commands [ 281s] + make -j8 [ 281s] Making all in src [ 281s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 281s] /usr/bin/m4 -I. atoms.gperf.m4 >atoms.gperf [ 281s] gperf --output-file atoms.c atoms.gperf [ 281s] make all-am [ 281s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 281s] CC atoms.lo [ 281s] CC event.lo [ 281s] CC xcb_aux.lo [ 281s] atoms.gperf:37:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 281s] atoms.gperf: In function 'hash': [ 281s] atoms.gperf:37:1: warning: old-style function definition [-Wold-style-definition] [ 281s] atoms.gperf: At top level: [ 281s] atoms.gperf:241:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 281s] atoms.gperf: In function 'in_word_set': [ 281s] atoms.gperf:241:1: warning: old-style function definition [-Wold-style-definition] [ 281s] atoms.gperf: In function 'makename': [ 281s] atoms.gperf:292:2: warning: function might be possible candidate for 'gnu_printf' format attribute [-Wmissing-format-attribute] [ 282s] CCLD libxcb-util.la [ 282s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] make[1]: Nothing to be done for `all-am'. [ 282s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] + exit 0 [ 282s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.YzNy1H [ 282s] + umask 022 [ 282s] + cd /home/abuild/rpmbuild/BUILD [ 282s] + cd xcb-util-0.3.8 [ 282s] + LANG=C [ 282s] + export LANG [ 282s] + unset DISPLAY [ 282s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 282s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 282s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 282s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm install [ 282s] Making install in src [ 282s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] /usr/bin/make install-am [ 282s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] test -z "/usr/lib" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib" [ 282s] /bin/sh ../libtool --mode=install /usr/bin/install -c libxcb-util.la '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib' [ 282s] libtool: install: /usr/bin/install -c .libs/libxcb-util.so.0.0.0 /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib/libxcb-util.so.0.0.0 [ 282s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so.0 || { rm -f libxcb-util.so.0 && ln -s libxcb-util.so.0.0.0 libxcb-util.so.0; }; }) [ 282s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib && { ln -s -f libxcb-util.so.0.0.0 libxcb-util.so || { rm -f libxcb-util.so && ln -s libxcb-util.so.0.0.0 libxcb-util.so; }; }) [ 282s] libtool: install: /usr/bin/install -c .libs/libxcb-util.lai /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib/libxcb-util.la [ 282s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 282s] test -z "/usr/include/xcb" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/include/xcb" [ 282s] /usr/bin/install -c -m 644 xcb_util.h xcb_atom.h xcb_aux.h xcb_bitops.h xcb_event.h '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/include/xcb' [ 282s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8/src' [ 282s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] make[2]: Nothing to be done for `install-exec-am'. [ 282s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib/pkgconfig" [ 282s] /usr/bin/install -c -m 644 xcb-atom.pc xcb-aux.pc xcb-event.pc xcb-util.pc xcb-renderutil.pc '/home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib/pkgconfig' [ 282s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xcb-util-0.3.8' [ 282s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/share/info/dir [ 282s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm -regex '.*\.la$' [ 282s] + xargs rm -f -- [ 282s] + find /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm -regex '.*\.a$' [ 282s] + xargs rm -f -- [ 282s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xcb-util-0.3.8 [ 282s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm/usr/lib/libxcb-util.so.0.0.0 [ 282s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.debug [ 282s] symlinked /usr/lib/debug/usr/lib/libxcb-util.so.0.0.0.debug to /usr/lib/debug/usr/lib/libxcb-util.so.0.debug [ 282s] 56 blocks [ 282s] + /usr/lib/rpm/check-buildroot [ 282s] + /usr/lib/rpm//brp-compress [ 282s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 283s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 283s] + /usr/lib/rpm/brp-python-hardlink [ 283s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 283s] Processing files: xcb-util-0.3.8-3.1.armv7l [ 283s] Provides: libxcb-util.so.0 xcb-renderutil [ 283s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 283s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 283s] Requires(post): /sbin/ldconfig [ 283s] Requires(postun): /sbin/ldconfig [ 283s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxcb.so.1 [ 283s] Processing files: xcb-util-devel-0.3.8-3.1.armv7l [ 283s] Provides: pkgconfig(xcb-atom) = 0.3.8 pkgconfig(xcb-aux) = 0.3.8 pkgconfig(xcb-event) = 0.3.8 pkgconfig(xcb-renderutil) = 0.3.8 pkgconfig(xcb-util) = 0.3.8 [ 283s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 283s] Requires: /usr/bin/pkg-config libxcb-util.so.0 pkgconfig(xcb) [ 283s] Processing files: xcb-util-debuginfo-0.3.8-3.1.armv7l [ 283s] Processing files: xcb-util-debugsource-0.3.8-3.1.armv7l [ 283s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 283s] Wrote: /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-3.1.src.rpm [ 283s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-0.3.8-3.1.armv7l.rpm [ 283s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-devel-0.3.8-3.1.armv7l.rpm [ 284s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-debuginfo-0.3.8-3.1.armv7l.rpm [ 284s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-debugsource-0.3.8-3.1.armv7l.rpm [ 284s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.04FUiV [ 284s] + umask 022 [ 284s] + cd /home/abuild/rpmbuild/BUILD [ 284s] + cd xcb-util-0.3.8 [ 284s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 284s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xcb-util-0.3.8-3.1.arm [ 284s] + exit 0 [ 284s] ... checking for files with abuild user/group [ 284s] ... creating baselibs [ 285s] ... saving built statistics [ 285s] /.build/build: line 3144: mount: command not found [ 285s] ERROR: no root disk device found, yet another new device name? [ 285s] ls: cannot access /sys/block/: No such file or directory [ 285s] /.build/build: line 3159: umount: command not found [ 285s] ... saving built packages [ 285s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-0.3.8-3.1.armv7l.rpm [ 285s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-debuginfo-0.3.8-3.1.armv7l.rpm [ 285s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-debugsource-0.3.8-3.1.armv7l.rpm [ 285s] /home/abuild/rpmbuild/RPMS/armv7l/xcb-util-devel-0.3.8-3.1.armv7l.rpm [ 285s] /home/abuild/rpmbuild/SRPMS/xcb-util-0.3.8-3.1.src.rpm [ 285s] /home/abuild/rpmbuild/OTHER/_statistics [ 285s] [ 285s] w02 finished "build xcb-util.spec" at Wed Feb 4 12:19:19 UTC 2015. [ 285s] [ 286s] /.build/build: line 368: 240 Killed background_monitor_process [ 288s] [ 277.176906] SysRq : Power Off [ 288s] [ 277.308594] Power down. [ 291s] build: extracting built packages... [ 301s] xcb-util-0.3.8-3.1.armv7l.rpm [ 301s] xcb-util-debuginfo-0.3.8-3.1.armv7l.rpm [ 301s] xcb-util-debugsource-0.3.8-3.1.armv7l.rpm [ 301s] xcb-util-devel-0.3.8-3.1.armv7l.rpm [ 301s] xcb-util-0.3.8-3.1.src.rpm [ 301s] _statistics