[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w23 started "build _service:gbs:xorg-launch-helper.spec" at Wed Feb 4 12:34:10 UTC 2015. [ 0s] [ 0s] Building xorg-launch-helper for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '2ca0deedcd5a78e6de4c68e26fadc2a4' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:xorg-launch-helper.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:xorg-launch-helper.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:xorg-launch-helper.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: dbus-libs -> dbus [ 3s] breaking dependency dbus -> dbus-libs [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 9s] booting kvm ... [ 9s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 12s] doing fast boot [ 12s] Creating device nodes with udev [ 25s] Waiting for device /dev/vda to appear: ok [ 25s] fsck from util-linux 2.21.2 [ 25s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 25s] /dev/vda: clean, 4702/2392064 files, 238526/9568256 blocks [ 25s] fsck succeeded. Mounting root device read-write. [ 25s] Mounting root /dev/vda [ 25s] mount -o rw -t ext4 /dev/vda /root [ 26s] replacing /etc/mtab with symlink to /proc/self/mounts [ 26s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 28s] 2nd stage started in virtual machine [ 28s] machine type: armv7l [ 28s] switching personality to 8... [ 29s] 2nd stage started in virtual machine [ 29s] machine type: armv7l [ 29s] /.build/build: line 770: mount: command not found [ 29s] swapon on /dev/vdb [ 29s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 29s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 29s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 30s] logging output to //.build.log... [ 31s] processing specfile /.build-srcdir/_service:gbs:xorg-launch-helper.spec ... [ 31s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-launch-helper.spec build rpmlint-Factory ... [ 54s] running rpm-x86-arm postinstall script [ 54s] running rpm-libs-x86-arm postinstall script [ 55s] running tizen-accelerator postinstall script [ 55s] running bash-x86-arm postinstall script [ 55s] initializing rpm db... [ 60s] [1/150] installing cross-armv7l-platformfile-0.0.1-3.1 [ 61s] [2/150] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 62s] [3/150] installing libX11-common-1.5.0-3.1 [ 68s] [4/150] installing tizen-release-2.2.0-3.1 [ 69s] [5/150] installing tzdata-2013h-3.1 [ 69s] [6/150] installing libgcc-4.6.4-3.14 [ 70s] [7/150] installing setup-0.1-3.1 [ 72s] [8/150] installing filesystem-0.1-3.1 [ 75s] warning: group lock does not exist - using root [ 75s] [9/150] installing eglibc-2.13-3.9 [ 76s] [10/150] installing libstdc++-4.6.4-3.14 [ 76s] [11/150] installing eglibc-common-2.13-3.9 [ 78s] [12/150] installing libstdc++-devel-4.6.4-3.14 [ 78s] [13/150] installing bash-4.1-3.1 [ 78s] [14/150] installing bzip2-libs-1.0.5-3.2 [ 78s] [15/150] installing cpio-2.8-3.1 [ 78s] [16/150] installing diffutils-3.0-3.1 [ 78s] [17/150] installing e2fsprogs-libs-1.41.9-3.1 [ 79s] [18/150] installing elfutils-libelf-0.152-3.8 [ 79s] [19/150] installing expat-2.0.1-3.2 [ 79s] [20/150] installing fdupes-1.40-3.1 [ 79s] [21/150] installing findutils-4.2.31-3.1 [ 79s] [22/150] installing gdbm-1.8.3-3.3 [ 79s] [23/150] installing libXau-1.0.7-3.1 [ 79s] [24/150] installing libattr-2.4.44-3.4 [ 80s] [25/150] installing libgomp-4.6.4-3.14 [ 80s] [26/150] installing liblua-5.1.4-3.2 [ 80s] [27/150] installing libuuid-2.20.2-3.1 [ 80s] [28/150] installing lzo-2.03-3.3 [ 80s] [29/150] installing m4-1.4.14-3.1 [ 81s] [30/150] installing net-tools-1.60-3.1 [ 81s] [31/150] installing nspr-4.9-3.6 [ 81s] [32/150] installing nss-softokn-freebl-3.12.9-3.11 [ 81s] [33/150] installing patch-2.6-3.1 [ 82s] [34/150] installing pkg-config-0.25-2.2 [ 82s] [35/150] installing popt-1.16-3.2 [ 82s] [36/150] installing readline-5.2-3.2 [ 83s] [37/150] installing sed-4.1.5-3.1 [ 83s] [38/150] installing smack-1.0+s14-3.2 [ 83s] [39/150] installing sqlite-3.7.13-3.2 [ 83s] [40/150] installing systemd-libs-210-7.1 [ 84s] [41/150] installing tar-1.17-3.2 [ 84s] [42/150] installing xz-libs-5.0.3-3.3 [ 85s] [43/150] installing zlib-1.2.5-3.8 [ 85s] [44/150] installing gmp-4.2.1-3.2 [ 85s] [45/150] installing libpcre-7.7-3.3 [ 86s] [46/150] installing ncurses-libs-5.7-3.2 [ 86s] [47/150] installing build-compare-2009.10.14-3.5 [ 86s] [48/150] installing qemu.x86_64-1.2-5.1 [ 92s] [49/150] installing eglibc-headers-2.13-3.9 [ 92s] [50/150] installing libcap-2.21-3.2 [ 93s] [51/150] installing unzip-6.0-3.4 [ 93s] [52/150] installing zlib-devel-1.2.5-3.8 [ 93s] [53/150] installing grep-2.5.1a-3.1 [ 94s] [54/150] installing libacl-2.2.49-3.2 [ 94s] [55/150] installing libfile-5.04-3.2 [ 94s] [56/150] installing libxcb-1.8.1-3.1 [ 95s] [57/150] installing lzo-minilzo-2.03-3.3 [ 95s] [58/150] installing make-3.82-3.2 [ 96s] [59/150] installing mpfr-3.0.0-3.2 [ 96s] [60/150] installing ncurses-5.7-3.2 [ 96s] [61/150] installing bzip2-1.0.5-3.2 [ 96s] [62/150] installing kmod-libs-15-3.1 [ 96s] [63/150] installing libblkid-2.20.2-3.1 [ 97s] [64/150] installing xz-5.0.3-3.3 [ 97s] [65/150] installing binutils-2.22-3.4 [ 98s] [66/150] installing elfutils-libs-0.152-3.8 [ 98s] [67/150] installing nss-3.12.9-3.11 [ 98s] [68/150] installing perl-5.12.1-3.3 [ 100s] [69/150] installing ncurses-base-5.7-3.2 [ 100s] [70/150] installing perl-HTML-Tagset-3.20-3.1 [ 100s] [71/150] installing perl-IO-Compress-Base-2.008-3.3 [ 100s] [72/150] installing perl-Module-Pluggable-3.60-3.3 [ 100s] [73/150] installing perl-Pod-Escapes-1.04-3.3 [ 100s] [74/150] installing perl-TimeDate-1.20-3.1 [ 100s] [75/150] installing eglibc-devel-2.13-3.9 [ 101s] [76/150] installing file-5.04-3.2 [ 101s] [77/150] installing lzo-devel-2.03-3.3 [ 101s] [78/150] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 101s] [79/150] installing perl-devel-5.12.1-3.3 [ 101s] [80/150] installing perl-libs-5.12.1-3.3 [ 102s] [81/150] installing coreutils-6.9-3.3 [ 102s] [82/150] installing libX11-1.5.0-3.1 [ 102s] [83/150] installing libmount-2.20.2-3.1 [ 102s] [84/150] installing mpc-0.9-3.2 [ 102s] [85/150] installing xz-lzma-compat-5.0.3-3.3 [ 102s] [86/150] installing elfutils-0.152-3.8 [ 102s] [87/150] installing nss-sysinit-3.12.9-3.11 [ 103s] [88/150] installing rpm-libs-4.9.1-4.1 [ 103s] [89/150] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 103s] [90/150] installing perl-Pod-Simple-3.07-3.3 [ 103s] [91/150] installing perl-Test-Simple-0.80-3.3 [ 103s] [92/150] installing tizen-accelerator-1.0.1-3.1 [ 104s] [93/150] installing perl-IO-Compress-Zlib-2.008-3.3 [ 104s] [94/150] installing perl-Test-Harness-3.12-3.3 [ 104s] [95/150] installing gawk-3.1.5-3.2 [ 104s] [96/150] installing gzip-1.3.12-3.1 [ 104s] [97/150] installing build-2011.01.10a-3.1 [ 104s] [98/150] installing rpm-4.9.1-4.1 [ 104s] [99/150] installing cpp-4.6.4-3.14 [ 105s] [100/150] installing dbus-1.6.4-3.1 [ 105s] [101/150] installing util-linux-2.20.2-3.1 [ 106s] [102/150] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 106s] [103/150] installing dbus-libs-1.6.4-3.1 [ 106s] [104/150] installing eglibc-x86-arm-2.13-2.3 [ 107s] [105/150] installing elfutils-libelf-x86-arm-0.152-2.1 [ 107s] [106/150] installing elfutils-libs-x86-arm-0.152-2.3 [ 107s] [107/150] installing gmp-x86-arm-4.2.1-2.1 [ 107s] [108/150] installing libacl-x86-arm-2.2.49-2.1 [ 107s] [109/150] installing libattr-x86-arm-2.4.44-2.1 [ 107s] [110/150] installing libcap-x86-arm-2.21-2.1 [ 107s] [111/150] installing libfile-x86-arm-5.04-2.2 [ 108s] [112/150] installing libgcc-x86-arm-4.6.4-2.1 [ 108s] [113/150] installing liblua-x86-arm-5.1.4-2.1 [ 108s] [114/150] installing mpc-x86-arm-0.9-2.1 [ 108s] [115/150] installing mpfr-x86-arm-3.0.0-2.1 [ 108s] [116/150] installing ncurses-libs-x86-arm-5.7-2.2 [ 108s] [117/150] installing nspr-x86-arm-4.9-2.3 [ 109s] [118/150] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 109s] [119/150] installing nss-x86-arm-3.12.9-2.3 [ 109s] [120/150] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 109s] [121/150] installing popt-x86-arm-1.16-2.1 [ 109s] [122/150] installing rpm-libs-x86-arm-4.9.1-2.2 [ 110s] [123/150] installing sqlite-x86-arm-3.7.13-2.1 [ 110s] [124/150] installing xz-libs-x86-arm-5.0.3-2.1 [ 110s] [125/150] installing zlib-x86-arm-1.2.5-2.1 [ 110s] [126/150] installing systemd-210-7.1 [ 111s] [127/150] installing gcc-4.6.4-3.14 [ 111s] [128/150] installing rpm-build-4.9.1-4.1 [ 111s] [129/150] installing perl-CPAN-1.9205-3.3 [ 111s] [130/150] installing bash-x86-arm-4.1-2.1 [ 112s] [131/150] installing fdupes-x86-arm-1.40-2.1 [ 112s] [132/150] installing findutils-x86-arm-4.2.31-2.1 [ 112s] [133/150] installing gawk-x86-arm-3.1.5-2.2 [ 112s] [134/150] installing gzip-x86-arm-1.3.12-2.1 [ 112s] [135/150] installing make-x86-arm-3.82-2.1 [ 114s] [136/150] installing sed-x86-arm-4.1.5-2.1 [ 114s] [137/150] installing tar-x86-arm-1.17-2.2 [ 114s] [138/150] installing diffutils-x86-arm-3.0-2.1 [ 115s] [139/150] installing patch-x86-arm-2.6-2.1 [ 115s] [140/150] installing autoconf-2.68-3.1 [ 116s] [141/150] installing coreutils-x86-arm-6.9-2.1 [ 119s] [142/150] installing file-x86-arm-5.04-2.1 [ 119s] [143/150] installing elfutils-x86-arm-0.152-2.3 [ 119s] [144/150] installing gcc-c++-4.6.4-3.14 [ 120s] [145/150] installing rpm-x86-arm-4.9.1-2.2 [ 124s] /bin/rpm.orig-arm already present - skipping. [ 124s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 124s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 124s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 124s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 124s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 124s] [146/150] installing rpm-build-x86-arm-4.9.1-2.2 [ 124s] [147/150] installing automake-1.11.1-3.1 [ 124s] [148/150] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 145s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 145s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 145s] [149/150] installing libtool-2.2.6b-3.2 [ 145s] [150/150] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 146s] removing nis flags from //etc/nsswitch.conf... [ 147s] now finalizing build dir... [ 147s] /.build/build: line 2585: mount: command not found [ 147s] /.build/build: line 2586: mount: command not found [ 151s] build target is armv7l-tizen-linux [ 151s] ----------------------------------------------------------------- [ 151s] I have the following modifications for xorg-launch-helper.spec: [ 151s] 4c4 [ 151s] < Release: 1 [ 151s] --- [ 151s] > Release: 3.1 [ 151s] 56a57 [ 151s] > %changelog [ 151s] ----------------------------------------------------------------- [ 151s] ----- building xorg-launch-helper.spec (user abuild) [ 151s] ----------------------------------------------------------------- [ 151s] ----------------------------------------------------------------- [ 152s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/2ca0deedcd5a78e6de4c68e26fadc2a4-xorg-launch-helper' /home/abuild/rpmbuild/SOURCES/xorg-launch-helper.spec [ 152s] Building target platforms: armv7l-tizen-linux [ 152s] Building for target armv7l-tizen-linux [ 152s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Tok0db [ 152s] + umask 022 [ 152s] + cd /home/abuild/rpmbuild/BUILD [ 152s] + LANG=C [ 152s] + export LANG [ 152s] + unset DISPLAY [ 152s] + cd /home/abuild/rpmbuild/BUILD [ 152s] + rm -rf xorg-launch-helper-4.0.2 [ 152s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-launch-helper-4.0.2.tar.gz [ 152s] + /bin/tar -xf - [ 152s] + STATUS=0 [ 152s] + '[' 0 -ne 0 ']' [ 152s] + cd xorg-launch-helper-4.0.2 [ 152s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 152s] + exit 0 [ 152s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XbxcJQ [ 152s] + umask 022 [ 152s] + cd /home/abuild/rpmbuild/BUILD [ 152s] + cd xorg-launch-helper-4.0.2 [ 152s] + LANG=C [ 152s] + export LANG [ 152s] + unset DISPLAY [ 152s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 152s] + export CFLAGS [ 152s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 152s] + export CXXFLAGS [ 152s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 152s] + export FFLAGS [ 152s] + LD_AS_NEEDED=1 [ 152s] + export LD_AS_NEEDED [ 152s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 152s] + export CFLAGS [ 152s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 152s] + export CXXFLAGS [ 152s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 152s] + export FFLAGS [ 152s] + autoreconf -v --install --force [ 155s] autoreconf: Entering directory `.' [ 155s] autoreconf: configure.ac: not using Gettext [ 156s] autoreconf: running: aclocal --force [ 162s] autoreconf: configure.ac: tracing [ 165s] autoreconf: configure.ac: not using Libtool [ 165s] autoreconf: running: /usr/bin/autoconf --force [ 170s] autoreconf: running: /usr/bin/autoheader --force [ 174s] autoreconf: running: automake --add-missing --copy --force-missing [ 178s] configure.ac:6: installing `./install-sh' [ 178s] configure.ac:6: installing `./missing' [ 178s] src/Makefile.am: installing `./depcomp' [ 179s] autoreconf: Leaving directory `.' [ 179s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 180s] checking for a BSD-compatible install... /usr/bin/install -c [ 181s] checking whether build environment is sane... yes [ 181s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 181s] checking for gawk... gawk [ 181s] checking whether make sets $(MAKE)... yes [ 181s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 181s] checking for gcc... gcc [ 181s] checking whether the C compiler works... yes [ 181s] checking for C compiler default output file name... a.out [ 181s] checking for suffix of executables... [ 181s] checking whether we are cross compiling... no [ 181s] checking for suffix of object files... o [ 181s] checking whether we are using the GNU C compiler... yes [ 181s] checking whether gcc accepts -g... yes [ 181s] checking for gcc option to accept ISO C89... none needed [ 181s] checking for style of include used by make... GNU [ 181s] checking dependency style of gcc... gcc3 [ 181s] checking for main in -lpthread... yes [ 181s] checking for main in -lrt... yes [ 181s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 181s] checking for pkg-config... /usr/bin/pkg-config [ 181s] checking pkg-config is at least version 0.9.0... yes [ 181s] checking for SYSTEMD... yes [ 181s] checking how to run the C preprocessor... gcc -E [ 181s] checking for grep that handles long lines and -e... /bin/grep [ 181s] checking for egrep... /bin/grep -E [ 181s] checking for ANSI C header files... yes [ 181s] checking for sys/types.h... yes [ 181s] checking for sys/stat.h... yes [ 181s] checking for stdlib.h... yes [ 181s] checking for string.h... yes [ 182s] checking for memory.h... yes [ 182s] checking for strings.h... yes [ 182s] checking for inttypes.h... yes [ 182s] checking for stdint.h... yes [ 182s] checking for unistd.h... yes [ 182s] checking fcntl.h usability... yes [ 182s] checking fcntl.h presence... yes [ 182s] checking for fcntl.h... yes [ 182s] checking for stdlib.h... (cached) yes [ 182s] checking for string.h... (cached) yes [ 182s] checking sys/ioctl.h usability... yes [ 182s] checking sys/ioctl.h presence... yes [ 182s] checking for sys/ioctl.h... yes [ 182s] checking for unistd.h... (cached) yes [ 182s] checking for pid_t... yes [ 182s] checking vfork.h usability... no [ 182s] checking vfork.h presence... no [ 182s] checking for vfork.h... no [ 182s] checking for fork... yes [ 182s] checking for vfork... yes [ 182s] checking for working fork... yes [ 182s] checking for working vfork... (cached) yes [ 182s] checking for clock_gettime... yes [ 182s] checking for memset... yes [ 182s] checking for strdup... yes [ 182s] configure: creating ./config.status [ 182s] config.status: creating Makefile [ 182s] config.status: creating src/Makefile [ 182s] config.status: creating xorg.service [ 182s] config.status: creating xorg.target [ 182s] config.status: creating config.h [ 182s] config.status: executing depfiles commands [ 182s] + make -j4 [ 182s] make all-recursive [ 182s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 182s] Making all in src [ 182s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 182s] gcc -DHAVE_CONFIG_H -I. -I.. -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.c [ 183s] mv -f .deps/main.Tpo .deps/main.Po [ 183s] gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -o xorg-launch-helper main.o -lrt -lpthread [ 183s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 183s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] + exit 0 [ 183s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.8Zjdgp [ 183s] + umask 022 [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + cd xorg-launch-helper-4.0.2 [ 183s] + LANG=C [ 183s] + export LANG [ 183s] + unset DISPLAY [ 183s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm [ 183s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm [ 183s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/share/license [ 183s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/share/license/xorg-launch-helper [ 183s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm install [ 183s] Making install in src [ 183s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 183s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 183s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/bin" [ 183s] /usr/bin/install -c xorg-launch-helper '/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/bin' [ 183s] make[2]: Nothing to be done for `install-data-am'. [ 183s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 183s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2/src' [ 183s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[2]: Nothing to be done for `install-exec-am'. [ 183s] test -z "/usr/lib/systemd/user" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user" [ 183s] /usr/bin/install -c -m 644 xorg.service xorg.target '/home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user' [ 183s] /usr/bin/make install-data-hook [ 183s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user/xorg.target.wants [ 183s] ln -sf ../xorg.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user/xorg.target.wants/xorg.service [ 183s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2' [ 183s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/share/info/dir [ 183s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm -regex '.*\.la$' [ 183s] + xargs rm -f -- [ 183s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm -regex '.*\.a$' [ 183s] + xargs rm -f -- [ 183s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/etc/sysconfig [ 183s] + install -m 644 /home/abuild/rpmbuild/SOURCES/xorg.conf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/etc/sysconfig/xorg [ 183s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/xorg_done.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user/ [ 183s] + ln -sf ../xorg_done.service /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/lib/systemd/user/xorg.target.wants [ 183s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-launch-helper-4.0.2 [ 183s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm/usr/bin/xorg-launch-helper [ 183s] 7 blocks [ 183s] + /usr/lib/rpm/check-buildroot [ 183s] + /usr/lib/rpm//brp-compress [ 183s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 183s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 183s] + /usr/lib/rpm/brp-python-hardlink [ 183s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm [ 183s] Processing files: xorg-launch-helper-4.0.2-3.1.armv7l [ 183s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 183s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libpthread.so.0 libpthread.so.0(GLIBC_2.4) librt.so.1 librt.so.1(GLIBC_2.4) [ 183s] Processing files: xorg-launch-helper-debuginfo-4.0.2-3.1.armv7l [ 183s] Processing files: xorg-launch-helper-debugsource-4.0.2-3.1.armv7l [ 183s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm [ 183s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-launch-helper-4.0.2-3.1.src.rpm [ 183s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-4.0.2-3.1.armv7l.rpm [ 183s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debuginfo-4.0.2-3.1.armv7l.rpm [ 183s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debugsource-4.0.2-3.1.armv7l.rpm [ 183s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.08pqUk [ 183s] + umask 022 [ 183s] + cd /home/abuild/rpmbuild/BUILD [ 183s] + cd xorg-launch-helper-4.0.2 [ 183s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-launch-helper-4.0.2-3.1.arm [ 183s] + exit 0 [ 183s] ... checking for files with abuild user/group [ 183s] ... creating baselibs [ 184s] ... saving built statistics [ 184s] /.build/build: line 3144: mount: command not found [ 184s] ERROR: no root disk device found, yet another new device name? [ 184s] ls: cannot access /sys/block/: No such file or directory [ 184s] /.build/build: line 3159: umount: command not found [ 184s] ... saving built packages [ 184s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-4.0.2-3.1.armv7l.rpm [ 184s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debuginfo-4.0.2-3.1.armv7l.rpm [ 184s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-launch-helper-debugsource-4.0.2-3.1.armv7l.rpm [ 184s] /home/abuild/rpmbuild/SRPMS/xorg-launch-helper-4.0.2-3.1.src.rpm [ 184s] /home/abuild/rpmbuild/OTHER/_statistics [ 184s] [ 184s] w23 finished "build xorg-launch-helper.spec" at Wed Feb 4 12:37:13 UTC 2015. [ 184s] [ 185s] /.build/build: line 368: 223 Killed background_monitor_process [ 187s] [ 175.975166] SysRq : Power Off [ 187s] [ 175.982122] Power down. [ 188s] build: extracting built packages... [ 197s] xorg-launch-helper-4.0.2-3.1.armv7l.rpm [ 197s] xorg-launch-helper-debuginfo-4.0.2-3.1.armv7l.rpm [ 197s] xorg-launch-helper-debugsource-4.0.2-3.1.armv7l.rpm [ 197s] xorg-launch-helper-4.0.2-3.1.src.rpm [ 197s] _statistics Retried build at Thu Feb 5 21:08:52 2015 returned same result, skipped