[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w07 started "build _service:gbs:xorg-x11-drv-gesture.spec" at Wed Feb 4 12:52:17 UTC 2015. [ 0s] [ 0s] Building xorg-x11-drv-gesture for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '2a4cecbb070db1a16750468d685b9643' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 0s] [6/57] preinstalling eglibc-common... [ 0s] [7/57] preinstalling bash... [ 0s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 1s] [27/57] preinstalling libfile... [ 1s] [28/57] preinstalling bzip2... [ 1s] [29/57] preinstalling nss... [ 1s] [30/57] preinstalling file... [ 1s] [31/57] preinstalling coreutils... [ 1s] [32/57] preinstalling rpm-libs... [ 1s] [33/57] preinstalling tizen-accelerator... [ 1s] [34/57] preinstalling rpm... [ 1s] [35/57] preinstalling gmp-x86-arm... [ 1s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 2s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 16000 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 8 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4764/2392064 files, 238241/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] /.build/build: line 770: mount: command not found [ 11s] swapon on /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec ... [ 12s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-drv-gesture.spec build rpmlint-Factory ... [ 12s] running rpm-x86-arm postinstall script [ 13s] running rpm-libs-x86-arm postinstall script [ 13s] running tizen-accelerator postinstall script [ 13s] running bash-x86-arm postinstall script [ 13s] initializing rpm db... [ 17s] [1/183] installing cross-armv7l-platformfile-0.0.1-3.1 [ 18s] [2/183] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 18s] [3/183] installing libX11-common-1.5.0-3.1 [ 18s] [4/183] installing tizen-release-2.2.0-3.1 [ 18s] [5/183] installing tzdata-2013h-3.1 [ 18s] [6/183] installing libgcc-4.6.4-3.14 [ 18s] [7/183] installing setup-0.1-3.1 [ 18s] [8/183] installing filesystem-0.1-3.1 [ 19s] warning: group lock does not exist - using root [ 19s] [9/183] installing eglibc-2.13-3.9 [ 19s] [10/183] installing libstdc++-4.6.4-3.14 [ 19s] [11/183] installing eglibc-common-2.13-3.9 [ 20s] [12/183] installing libstdc++-devel-4.6.4-3.14 [ 20s] [13/183] installing bash-4.1-3.1 [ 20s] [14/183] installing bzip2-libs-1.0.5-3.2 [ 20s] [15/183] installing capi-base-common-0.1.7-3.1 [ 20s] [16/183] installing cpio-2.8-3.1 [ 20s] [17/183] installing diffutils-3.0-3.1 [ 20s] [18/183] installing e2fsprogs-libs-1.41.9-3.1 [ 20s] [19/183] installing elfutils-libelf-0.152-3.8 [ 21s] [20/183] installing fdupes-1.40-3.1 [ 21s] [21/183] installing findutils-4.2.31-3.1 [ 21s] [22/183] installing gdbm-1.8.3-3.3 [ 21s] [23/183] installing libXau-1.0.7-3.1 [ 21s] [24/183] installing libXdmcp-1.1.1-3.1 [ 21s] [25/183] installing libattr-2.4.44-3.4 [ 21s] [26/183] installing libdrm2-2.4.35-3.1 [ 21s] [27/183] installing libgomp-4.6.4-3.14 [ 21s] [28/183] installing libgpg-error-1.7-3.1 [ 22s] [29/183] installing liblua-5.1.4-3.2 [ 22s] [30/183] installing libunwind-1.1-3.2 [ 22s] [31/183] installing libuuid-2.20.2-3.1 [ 22s] [32/183] installing lzo-2.03-3.3 [ 22s] [33/183] installing m4-1.4.14-3.1 [ 22s] [34/183] installing net-tools-1.60-3.1 [ 22s] [35/183] installing nspr-4.9-3.6 [ 22s] [36/183] installing nss-softokn-freebl-3.12.9-3.11 [ 22s] [37/183] installing patch-2.6-3.1 [ 22s] [38/183] installing pixman-0.28.2-3.1 [ 23s] [39/183] installing pkg-config-0.25-2.2 [ 23s] [40/183] installing popt-1.16-3.2 [ 23s] [41/183] installing readline-5.2-3.2 [ 23s] [42/183] installing sed-4.1.5-3.1 [ 23s] [43/183] installing smack-1.0+s14-3.2 [ 23s] [44/183] installing sqlite-3.7.13-3.2 [ 23s] [45/183] installing systemd-libs-210-7.1 [ 23s] [46/183] installing tar-1.17-3.2 [ 23s] [47/183] installing xz-libs-5.0.3-3.3 [ 24s] [48/183] installing zlib-1.2.5-3.8 [ 24s] [49/183] installing gmp-4.2.1-3.2 [ 24s] [50/183] installing libpcre-7.7-3.3 [ 24s] [51/183] installing ncurses-libs-5.7-3.2 [ 24s] [52/183] installing build-compare-2009.10.14-3.5 [ 24s] [53/183] installing qemu.x86_64-1.2-5.1 [ 26s] [54/183] installing xorg-x11-proto-core-7.0.25-3.1 [ 26s] [55/183] installing xorg-x11-proto-dri2-2.8-3.1 [ 26s] [56/183] installing xorg-x11-proto-fonts-2.1.2-3.1 [ 26s] [57/183] installing xorg-x11-proto-gesture-0.1.0-3.1 [ 26s] [58/183] installing xorg-x11-proto-input-2.2-3.1 [ 26s] [59/183] installing xorg-x11-proto-kb-1.0.6-3.1 [ 26s] [60/183] installing xorg-x11-proto-randr-1.4-3.1 [ 26s] [61/183] installing xorg-x11-proto-renderproto-0.11.1-3.1 [ 26s] [62/183] installing xorg-x11-proto-resource-1.2.0-3.1 [ 26s] [63/183] installing xorg-x11-proto-video-2.3.1-3.1 [ 27s] [64/183] installing xorg-x11-proto-xext-7.2.1-3.1 [ 27s] [65/183] installing xorg-x11-proto-xinerama-1.2.1-3.1 [ 27s] [66/183] installing xorg-x11-xutils-dev-7.7-3.1 [ 27s] [67/183] installing capi-base-common-devel-0.1.7-3.1 [ 27s] [68/183] installing eglibc-headers-2.13-3.9 [ 27s] [69/183] installing libcap-2.21-3.2 [ 27s] [70/183] installing pixman-devel-0.28.2-3.1 [ 27s] [71/183] installing unzip-6.0-3.4 [ 27s] [72/183] installing zlib-devel-1.2.5-3.8 [ 27s] [73/183] installing freetype-2.4.9-3.1 [ 28s] [74/183] installing grep-2.5.1a-3.1 [ 28s] [75/183] installing libacl-2.2.49-3.2 [ 28s] [76/183] installing libfile-5.04-3.2 [ 28s] [77/183] installing libfontenc-1.1.0-3.1 [ 28s] [78/183] installing libgcrypt-1.4.4-3.1 [ 28s] [79/183] installing libpciaccess-0.13.1-3.1 [ 28s] [80/183] installing libxcb-1.8.1-3.1 [ 28s] [81/183] installing lzo-minilzo-2.03-3.3 [ 28s] [82/183] installing make-3.82-3.2 [ 28s] [83/183] installing mpfr-3.0.0-3.2 [ 29s] [84/183] installing ncurses-5.7-3.2 [ 29s] [85/183] installing bzip2-1.0.5-3.2 [ 29s] [86/183] installing libblkid-2.20.2-3.1 [ 29s] [87/183] installing smack-utils-1.0+s14-3.2 [ 29s] [88/183] installing xz-5.0.3-3.3 [ 29s] [89/183] installing binutils-2.22-3.4 [ 29s] [90/183] installing elfutils-libs-0.152-3.8 [ 29s] [91/183] installing nss-3.12.9-3.11 [ 29s] [92/183] installing perl-5.12.1-3.3 [ 30s] [93/183] installing ncurses-base-5.7-3.2 [ 30s] [94/183] installing perl-HTML-Tagset-3.20-3.1 [ 30s] [95/183] installing perl-IO-Compress-Base-2.008-3.3 [ 31s] [96/183] installing perl-Module-Pluggable-3.60-3.3 [ 31s] [97/183] installing perl-Pod-Escapes-1.04-3.3 [ 31s] [98/183] installing perl-TimeDate-1.20-3.1 [ 31s] [99/183] installing eglibc-devel-2.13-3.9 [ 31s] [100/183] installing libpciaccess-devel-0.13.1-3.1 [ 31s] [101/183] installing file-5.04-3.2 [ 31s] [102/183] installing lzo-devel-2.03-3.3 [ 31s] [103/183] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 31s] [104/183] installing perl-devel-5.12.1-3.3 [ 31s] [105/183] installing perl-libs-5.12.1-3.3 [ 31s] [106/183] installing coreutils-6.9-3.3 [ 32s] [107/183] installing libX11-1.5.0-3.1 [ 32s] [108/183] installing libdlog-0.4.1-3.1 [ 32s] [109/183] installing libmount-2.20.2-3.1 [ 32s] [110/183] installing mpc-0.9-3.2 [ 32s] [111/183] installing xz-lzma-compat-5.0.3-3.3 [ 32s] [112/183] installing elfutils-0.152-3.8 [ 32s] [113/183] installing libXfont-1.4.5-3.1 [ 32s] [114/183] installing nss-sysinit-3.12.9-3.11 [ 32s] [115/183] installing rpm-libs-4.9.1-4.1 [ 33s] [116/183] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 33s] [117/183] installing perl-Pod-Simple-3.07-3.3 [ 33s] [118/183] installing perl-Test-Simple-0.80-3.3 [ 33s] [119/183] installing tizen-accelerator-1.0.1-3.1 [ 33s] [120/183] installing libdlog-devel-0.4.1-3.1 [ 33s] [121/183] installing libxkbfile-1.0.8-3.1 [ 33s] [122/183] installing perl-IO-Compress-Zlib-2.008-3.3 [ 33s] [123/183] installing perl-Test-Harness-3.12-3.3 [ 33s] [124/183] installing dlogutil-0.4.1-3.1 [ 34s] /var/tmp/rpm-tmp.dSdhkw: line 1: systemctl: command not found [ 34s] warning: %post(dlogutil-0.4.1-3.1.armv7l) scriptlet failed, exit status 127 [ 34s] [125/183] installing gawk-3.1.5-3.2 [ 34s] [126/183] installing gzip-1.3.12-3.1 [ 34s] [127/183] installing build-2011.01.10a-3.1 [ 34s] [128/183] installing rpm-4.9.1-4.1 [ 34s] [129/183] installing cpp-4.6.4-3.14 [ 34s] [130/183] installing sys-assert-0.3.2-3.1 [ 34s] [131/183] installing util-linux-2.20.2-3.1 [ 35s] [132/183] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 35s] [133/183] installing eglibc-x86-arm-2.13-2.3 [ 35s] [134/183] installing elfutils-libelf-x86-arm-0.152-2.1 [ 35s] [135/183] installing elfutils-libs-x86-arm-0.152-2.3 [ 35s] [136/183] installing gmp-x86-arm-4.2.1-2.1 [ 36s] [137/183] installing libacl-x86-arm-2.2.49-2.1 [ 36s] [138/183] installing libattr-x86-arm-2.4.44-2.1 [ 36s] [139/183] installing libcap-x86-arm-2.21-2.1 [ 36s] [140/183] installing libfile-x86-arm-5.04-2.2 [ 36s] [141/183] installing libgcc-x86-arm-4.6.4-2.1 [ 36s] [142/183] installing liblua-x86-arm-5.1.4-2.1 [ 36s] [143/183] installing mpc-x86-arm-0.9-2.1 [ 36s] [144/183] installing mpfr-x86-arm-3.0.0-2.1 [ 36s] [145/183] installing ncurses-libs-x86-arm-5.7-2.2 [ 37s] [146/183] installing nspr-x86-arm-4.9-2.3 [ 37s] [147/183] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 37s] [148/183] installing nss-x86-arm-3.12.9-2.3 [ 37s] [149/183] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 37s] [150/183] installing popt-x86-arm-1.16-2.1 [ 37s] [151/183] installing rpm-libs-x86-arm-4.9.1-2.2 [ 37s] [152/183] installing sqlite-x86-arm-3.7.13-2.1 [ 37s] [153/183] installing xz-libs-x86-arm-5.0.3-2.1 [ 38s] [154/183] installing zlib-x86-arm-1.2.5-2.1 [ 38s] [155/183] installing xorg-x11-xkb-utils-7.9.1-3.1 [ 38s] [156/183] installing gcc-4.6.4-3.14 [ 38s] [157/183] installing rpm-build-4.9.1-4.1 [ 38s] [158/183] installing xkeyboard-config-2.9.1-3.1 [ 38s] [159/183] installing perl-CPAN-1.9205-3.3 [ 38s] [160/183] installing bash-x86-arm-4.1-2.1 [ 38s] [161/183] installing fdupes-x86-arm-1.40-2.1 [ 39s] [162/183] installing findutils-x86-arm-4.2.31-2.1 [ 39s] [163/183] installing gawk-x86-arm-3.1.5-2.2 [ 39s] [164/183] installing gzip-x86-arm-1.3.12-2.1 [ 39s] [165/183] installing make-x86-arm-3.82-2.1 [ 39s] [166/183] installing sed-x86-arm-4.1.5-2.1 [ 39s] [167/183] installing tar-x86-arm-1.17-2.2 [ 39s] [168/183] installing diffutils-x86-arm-3.0-2.1 [ 40s] [169/183] installing patch-x86-arm-2.6-2.1 [ 40s] [170/183] installing autoconf-2.68-3.1 [ 40s] [171/183] installing coreutils-x86-arm-6.9-2.1 [ 41s] /.build/build: line 729: tail: command not found [ 41s] /.build/build: line 731: [: -gt: unary operator expected [ 42s] [172/183] installing file-x86-arm-5.04-2.1 [ 42s] [173/183] installing elfutils-x86-arm-0.152-2.3 [ 42s] [174/183] installing gcc-c++-4.6.4-3.14 [ 42s] [175/183] installing rpm-x86-arm-4.9.1-2.2 [ 42s] /bin/rpm.orig-arm already present - skipping. [ 42s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 42s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 42s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 42s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 42s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 42s] [176/183] installing rpm-build-x86-arm-4.9.1-2.2 [ 42s] [177/183] installing xorg-x11-server-common-1.13.29-3.1 [ 43s] [178/183] installing automake-1.11.1-3.1 [ 43s] [179/183] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 44s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 44s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 44s] [180/183] installing libtool-2.2.6b-3.2 [ 44s] [181/183] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 45s] [182/183] installing xorg-x11-server-Xorg-1.13.29-3.1 [ 45s] [183/183] installing xorg-x11-server-devel-1.13.29-3.1 [ 45s] removing nis flags from //etc/nsswitch.conf... [ 45s] now finalizing build dir... [ 45s] /.build/build: line 2585: mount: command not found [ 45s] /.build/build: line 2586: mount: command not found [ 48s] build target is armv7l-tizen-linux [ 48s] ----------------------------------------------------------------- [ 48s] I have the following modifications for xorg-x11-drv-gesture.spec: [ 48s] 5c5 [ 48s] < Release: 1 [ 48s] --- [ 48s] > Release: 3.1 [ 48s] ----------------------------------------------------------------- [ 48s] ----- building xorg-x11-drv-gesture.spec (user abuild) [ 48s] ----------------------------------------------------------------- [ 48s] ----------------------------------------------------------------- [ 48s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/2a4cecbb070db1a16750468d685b9643-xorg-x11-drv-gesture' /home/abuild/rpmbuild/SOURCES/xorg-x11-drv-gesture.spec [ 49s] Building target platforms: armv7l-tizen-linux [ 49s] Building for target armv7l-tizen-linux [ 49s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tQnbMe [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + rm -rf xorg-x11-drv-gesture-0.1.55 [ 49s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-drv-gesture-0.1.55.tar.gz [ 49s] + /bin/tar -xf - [ 49s] + STATUS=0 [ 49s] + '[' 0 -ne 0 ']' [ 49s] + cd xorg-x11-drv-gesture-0.1.55 [ 49s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GMHvbl [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd xorg-x11-drv-gesture-0.1.55 [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LD_AS_NEEDED=1 [ 49s] + export LD_AS_NEEDED [ 49s] + cd wearable [ 49s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + ./autogen.sh --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info -ivf [ 53s] autoreconf: Entering directory `.' [ 53s] autoreconf: configure.ac: not using Gettext [ 54s] autoreconf: running: aclocal [ 75s] autoreconf: configure.ac: tracing [ 82s] autoreconf: running: libtoolize --copy [ 82s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. [ 82s] libtoolize: copying file `./ltmain.sh' [ 82s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 82s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 82s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 98s] autoreconf: running: /usr/bin/autoconf [ 107s] autoreconf: running: /usr/bin/autoheader [ 110s] autoreconf: running: automake --add-missing --copy --no-force [ 114s] configure.ac:41: installing `./config.guess' [ 114s] configure.ac:41: installing `./config.sub' [ 114s] configure.ac:30: installing `./install-sh' [ 114s] configure.ac:30: installing `./missing' [ 115s] src/Makefile.am: installing `./depcomp' [ 117s] autoreconf: Leaving directory `.' [ 117s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 117s] + export CFLAGS [ 117s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 117s] + export CXXFLAGS [ 117s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 117s] + export FFLAGS [ 117s] + autoreconf -v --install --force [ 121s] autoreconf: Entering directory `.' [ 121s] autoreconf: configure.ac: not using Gettext [ 122s] autoreconf: running: aclocal --force [ 138s] autoreconf: configure.ac: tracing [ 146s] autoreconf: running: libtoolize --copy --force [ 146s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. [ 146s] libtoolize: copying file `./ltmain.sh' [ 146s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 146s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 146s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 163s] autoreconf: running: /usr/bin/autoconf --force [ 176s] autoreconf: running: /usr/bin/autoheader --force [ 185s] autoreconf: running: automake --add-missing --copy --force-missing [ 191s] autoreconf: Leaving directory `.' [ 191s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info 'CFLAGS=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' LDFLAGS= [ 191s] checking for a BSD-compatible install... /usr/bin/install -c [ 192s] checking whether build environment is sane... yes [ 192s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 192s] checking for gawk... gawk [ 192s] checking whether make sets $(MAKE)... yes [ 192s] checking whether to enable maintainer-specific portions of Makefiles... no [ 192s] checking build system type... armv7l-unknown-linux-gnueabi [ 193s] checking host system type... armv7l-unknown-linux-gnueabi [ 193s] checking for style of include used by make... GNU [ 193s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 193s] checking for gcc... gcc [ 193s] checking whether the C compiler works... yes [ 193s] checking for C compiler default output file name... a.out [ 193s] checking for suffix of executables... [ 193s] checking whether we are cross compiling... no [ 193s] checking for suffix of object files... o [ 193s] checking whether we are using the GNU C compiler... yes [ 193s] checking whether gcc accepts -g... yes [ 193s] checking for gcc option to accept ISO C89... none needed [ 193s] checking dependency style of gcc... gcc3 [ 193s] checking for a sed that does not truncate output... /bin/sed [ 193s] checking for grep that handles long lines and -e... /bin/grep [ 193s] checking for egrep... /bin/grep -E [ 193s] checking for fgrep... /bin/grep -F [ 193s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 193s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 193s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 193s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 193s] checking whether ln -s works... yes [ 193s] checking the maximum length of command line arguments... 1572864 [ 193s] checking whether the shell understands some XSI constructs... yes [ 193s] checking whether the shell understands "+="... yes [ 193s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 193s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 193s] checking for objdump... objdump [ 193s] checking how to recognize dependent libraries... pass_all [ 193s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 193s] checking for ar... ar [ 193s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 193s] checking for strip... strip [ 193s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 193s] checking for ranlib... ranlib [ 193s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 193s] checking how to run the C preprocessor... gcc -E [ 193s] checking for ANSI C header files... yes [ 193s] checking for sys/types.h... yes [ 193s] checking for sys/stat.h... yes [ 193s] checking for stdlib.h... yes [ 193s] checking for string.h... yes [ 194s] checking for memory.h... yes [ 194s] checking for strings.h... yes [ 194s] checking for inttypes.h... yes [ 194s] checking for stdint.h... yes [ 194s] checking for unistd.h... yes [ 194s] checking for dlfcn.h... yes [ 194s] checking for objdir... .libs [ 194s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 194s] checking for gcc option to produce PIC... -fPIC -DPIC [ 194s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 194s] checking if gcc static flag -static works... no [ 194s] checking if gcc supports -c -o file.o... yes [ 194s] checking if gcc supports -c -o file.o... (cached) yes [ 194s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 194s] checking whether -lc should be explicitly linked in... no [ 194s] checking dynamic linker characteristics... GNU/Linux ld.so [ 194s] checking how to hardcode library paths into programs... immediate [ 194s] checking whether stripping libraries is possible... yes [ 194s] checking if libtool supports shared libraries... yes [ 194s] checking whether to build shared libraries... yes [ 194s] checking whether to build static libraries... no [ 194s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 194s] checking whether we are using the GNU C compiler... (cached) yes [ 194s] checking whether gcc accepts -g... (cached) yes [ 194s] checking for gcc option to accept ISO C89... (cached) none needed [ 194s] checking dependency style of gcc... (cached) gcc3 [ 194s] checking for gcc option to accept ISO C99... -std=gnu99 [ 194s] checking whether __clang__ is declared... no [ 194s] checking whether __INTEL_COMPILER is declared... no [ 194s] checking whether __SUNPRO_C is declared... no [ 194s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 194s] checking for pkg-config... /usr/bin/pkg-config [ 194s] checking pkg-config is at least version 0.9.0... yes [ 194s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 194s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 194s] checking if gcc -std=gnu99 supports-Wall... yes [ 194s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 194s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 194s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 195s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 195s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 195s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 195s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 195s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 195s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 195s] checking if gcc -std=gnu99 supports-Wunused... yes [ 195s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 195s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 195s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 195s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 195s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 195s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 195s] checking if gcc -std=gnu99 supports-pedantic... yes [ 195s] checking if gcc -std=gnu99 supports-Werror... yes [ 195s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 196s] checking for XORG... yes [ 196s] checking for ANSI C header files... (cached) yes [ 196s] configure: creating ./config.status [ 196s] config.status: creating Makefile [ 196s] config.status: creating src/Makefile [ 196s] config.status: creating man/Makefile [ 196s] config.status: creating xorg-gesture.pc [ 196s] config.status: creating config.h [ 196s] config.status: executing depfiles commands [ 196s] config.status: executing libtool commands [ 196s] + make -j8 [ 196s] make all-recursive [ 196s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 196s] Making all in src [ 196s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 196s] CC gesture.lo [ 196s] gesture.c:170:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 196s] gesture.c: In function '_GestureFindANRWindow': [ 196s] gesture.c:273:5: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'Window' [-Wformat] [ 196s] gesture.c:273:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'WindowPtr' [-Wformat] [ 196s] gesture.c: In function 'GestureRecognize_GroupFlick': [ 196s] gesture.c:949:29: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 196s] gesture.c: At top level: [ 196s] gesture.c:1322:1: warning: no previous prototype for 'GestureGetMaxTmajor' [-Wmissing-prototypes] [ 196s] gesture.c: In function 'GestureRecognize_PalmFlick': [ 196s] gesture.c:1468:13: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 196s] gesture.c:1360:17: warning: variable 'release_status' set but not used [-Wunused-but-set-variable] [ 196s] gesture.c:1359:17: warning: variable 'press_status' set but not used [-Wunused-but-set-variable] [ 196s] gesture.c: In function 'GesturePalmGetAbsAxisInfo': [ 196s] gesture.c:1815:10: warning: variable 'atom_tracking_id' set but not used [-Wunused-but-set-variable] [ 196s] gesture.c:1814:10: warning: variable 'atom_mt_slot' set but not used [-Wunused-but-set-variable] [ 196s] gesture.c: In function 'GestureHoldDetector': [ 196s] gesture.c:1921:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 196s] gesture.c: At top level: [ 196s] gesture.c:2105:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 196s] gesture.c: In function 'GesturePalmGetScreenInfo': [ 196s] gesture.c:2105:1: warning: old-style function definition [-Wold-style-definition] [ 196s] gesture.c: At top level: [ 196s] gesture.c:2147:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] [ 196s] gesture.c: In function 'GestureEnableDisable': [ 196s] gesture.c:2147:1: warning: old-style function definition [-Wold-style-definition] [ 196s] gesture.c: In function 'GestureHandleMTSyncEvent': [ 196s] gesture.c:2591:9: warning: unused variable 'idx' [-Wunused-variable] [ 196s] gesture.c: In function 'GestureHandleButtonReleaseEvent': [ 196s] gesture.c:2808:26: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 196s] gesture.c: In function 'GestureTimerHandler': [ 196s] gesture.c:2994:9: warning: format '%s' expects a matching 'char *' argument [-Wformat] [ 196s] gesture.c: In function 'GestureEnable': [ 196s] gesture.c:3143:9: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] [ 196s] gesture.c: In function 'GestureEnqueueEvent': [ 196s] gesture.c:3286:5: warning: enumeration value 'ET_KeyPress' not handled in switch [-Wswitch] [ 196s] gesture.c:3286:5: warning: enumeration value 'ET_KeyRelease' not handled in switch [-Wswitch] [ 196s] gesture.c:3286:5: warning: enumeration value 'ET_MTSync' not handled in switch [-Wswitch] [ 196s] gesture.c:3286:5: warning: enumeration value 'ET_Internal' not handled in switch [-Wswitch] [ 197s] CCLD gesture_drv.la [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 197s] Making all in man [ 197s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] sed -e 's|__vendorversion__|"xserver-xorg-input-gesture 0.1.0" "X Version 11"|' -e 's|__xorgversion__|"xserver-xorg-input-gesture 0.1.0" "X Version 11"|' -e 's|__xservername__|Xorg|g' -e 's|__xconfigfile__|xorg.conf|g' -e 's|__projectroot__|/usr|g' -e 's|__appmansuffix__|1|g' -e 's|__drivermansuffix__|4|g' -e 's|__adminmansuffix__|8|g' -e 's|__miscmansuffix__|7|g' -e 's|__filemansuffix__|5|g' < gesture.man > gesture.4 [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] + exit 0 [ 197s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.o50WLv [ 197s] + umask 022 [ 197s] + cd /home/abuild/rpmbuild/BUILD [ 197s] + cd xorg-x11-drv-gesture-0.1.55 [ 197s] + LANG=C [ 197s] + export LANG [ 197s] + unset DISPLAY [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 197s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 197s] + cd wearable [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 197s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/license [ 197s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/license/xorg-x11-drv-gesture [ 197s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm install [ 197s] Making install in src [ 197s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 197s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 197s] make[2]: Nothing to be done for `install-exec-am'. [ 197s] test -z "/usr/lib/xorg/modules/input" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/xorg/modules/input" [ 197s] /bin/sh ../libtool --mode=install /usr/bin/install -c gesture_drv.la '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/xorg/modules/input' [ 197s] libtool: install: /usr/bin/install -c .libs/gesture_drv.so /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/xorg/modules/input/gesture_drv.so [ 197s] libtool: install: /usr/bin/install -c .libs/gesture_drv.lai /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/xorg/modules/input/gesture_drv.la [ 197s] libtool: install: warning: remember to run `libtool --finish /usr/lib/xorg/modules/input' [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 197s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/src' [ 197s] Making install in man [ 197s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] make[2]: Nothing to be done for `install-exec-am'. [ 197s] test -z "/usr/share/man/man4" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/man/man4" [ 197s] /usr/bin/install -c -m 644 gesture.4 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/man/man4' [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable/man' [ 197s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] make[2]: Nothing to be done for `install-exec-am'. [ 197s] test -z "/usr/lib/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/pkgconfig" [ 197s] /usr/bin/install -c -m 644 xorg-gesture.pc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/pkgconfig' [ 197s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55/wearable' [ 197s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/info/dir [ 197s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm -regex '.*\.la$' [ 197s] + xargs rm -f -- [ 197s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm -regex '.*\.a$' [ 197s] + xargs rm -f -- [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/info [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/doc [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/doc/xorg-x11-drv-gesture [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/gtk-doc [ 197s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/share/man [ 197s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 197s] + xargs rm -f -- [ 197s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 197s] + xargs rm -f -- [ 197s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 197s] + xargs rm -f -- [ 197s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-drv-gesture-0.1.55 [ 197s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm/usr/lib/xorg/modules/input/gesture_drv.so [ 198s] 284 blocks [ 198s] + /usr/lib/rpm/check-buildroot [ 198s] + /usr/lib/rpm//brp-compress [ 198s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 198s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 198s] + /usr/lib/rpm/brp-python-hardlink [ 198s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 198s] Processing files: xorg-x11-drv-gesture-0.1.55-3.1.armv7l [ 198s] Provides: gesture_drv.so [ 198s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 198s] Requires: libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 198s] Processing files: xorg-x11-drv-gesture-devel-0.1.55-3.1.armv7l [ 198s] Provides: pkgconfig(xorg-gesture) = 0.1.0 [ 198s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 198s] Requires: /usr/bin/pkg-config [ 198s] Processing files: xorg-x11-drv-gesture-debuginfo-0.1.55-3.1.armv7l [ 198s] Processing files: xorg-x11-drv-gesture-debugsource-0.1.55-3.1.armv7l [ 198s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 198s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-drv-gesture-0.1.55-3.1.src.rpm [ 198s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-0.1.55-3.1.armv7l.rpm [ 198s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-devel-0.1.55-3.1.armv7l.rpm [ 198s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debuginfo-0.1.55-3.1.armv7l.rpm [ 198s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debugsource-0.1.55-3.1.armv7l.rpm [ 198s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.v0KVxJ [ 198s] + umask 022 [ 198s] + cd /home/abuild/rpmbuild/BUILD [ 198s] + cd xorg-x11-drv-gesture-0.1.55 [ 198s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-drv-gesture-0.1.55-3.1.arm [ 198s] + exit 0 [ 198s] ... checking for files with abuild user/group [ 198s] ... creating baselibs [ 199s] ... saving built statistics [ 199s] /.build/build: line 3144: mount: command not found [ 199s] ERROR: no root disk device found, yet another new device name? [ 199s] ls: cannot access /sys/block/: No such file or directory [ 199s] /.build/build: line 3159: umount: command not found [ 199s] ... saving built packages [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-0.1.55-3.1.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debuginfo-0.1.55-3.1.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-debugsource-0.1.55-3.1.armv7l.rpm [ 199s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-drv-gesture-devel-0.1.55-3.1.armv7l.rpm [ 199s] /home/abuild/rpmbuild/SRPMS/xorg-x11-drv-gesture-0.1.55-3.1.src.rpm [ 199s] /home/abuild/rpmbuild/OTHER/_statistics [ 199s] [ 199s] w07 finished "build xorg-x11-drv-gesture.spec" at Wed Feb 4 12:55:36 UTC 2015. [ 199s] [ 200s] /.build/build: line 368: 241 Killed background_monitor_process [ 202s] [ 194.944528] SysRq : Power Off [ 203s] [ 195.264428] Power down. [ 203s] build: extracting built packages... [ 203s] xorg-x11-drv-gesture-0.1.55-3.1.armv7l.rpm [ 203s] xorg-x11-drv-gesture-debuginfo-0.1.55-3.1.armv7l.rpm [ 203s] xorg-x11-drv-gesture-debugsource-0.1.55-3.1.armv7l.rpm [ 203s] xorg-x11-drv-gesture-devel-0.1.55-3.1.armv7l.rpm [ 203s] xorg-x11-drv-gesture-0.1.55-3.1.src.rpm [ 203s] _statistics Retried build at Thu Feb 5 21:20:09 2015 returned same result, skipped