[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:xorg-x11-misc-exynos.spec" at Wed Feb 4 08:19:15 UTC 2015. [ 0s] [ 0s] Building xorg-x11-misc-exynos for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '9ab772d4929c861a41ce24c969ef94bb' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:xorg-x11-misc-exynos.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:xorg-x11-misc-exynos.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:xorg-x11-misc-exynos.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 0s] [2/57] preinstalling libgcc... [ 0s] [3/57] preinstalling setup... [ 0s] [4/57] preinstalling filesystem... [ 0s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 1s] [25/57] preinstalling libcap... [ 1s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 2s] [57/57] preinstalling rpm-x86-arm... [ 2s] [ 2s] cycle: perl -> perl-libs [ 2s] breaking dependency perl-libs -> perl [ 2s] [1/8] preinstalling e2fsprogs-libs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling grep... [ 2s] [5/8] preinstalling libblkid... [ 2s] [6/8] preinstalling util-linux... [ 2s] [7/8] preinstalling perl-libs... [ 2s] [8/8] preinstalling perl... [ 3s] copying packages... [ 3s] reordering...cycle: bash -> eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> bash [ 3s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 3s] breaking dependency eglibc-common -> coreutils [ 3s] cycle: eglibc -> eglibc-common [ 3s] breaking dependency eglibc-common -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> findutils [ 3s] breaking dependency eglibc-common -> findutils [ 3s] cycle: eglibc -> eglibc-common -> grep [ 3s] breaking dependency grep -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 3s] breaking dependency grep -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 3s] breaking dependency libpcre -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 3s] breaking dependency libpcre -> libgcc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 3s] breaking dependency libstdc++ -> eglibc [ 3s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 3s] breaking dependency eglibc-common -> grep [ 3s] cycle: eglibc -> eglibc-common -> libgcc [ 3s] breaking dependency eglibc -> eglibc-common [ 3s] cycle: eglibc -> libgcc [ 3s] breaking dependency libgcc -> eglibc [ 3s] cycle: filesystem -> setup [ 3s] breaking dependency setup -> filesystem [ 3s] cycle: ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses [ 3s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 3s] breaking dependency ncurses-libs -> ncurses-base [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl -> perl-libs [ 3s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 3s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl -> perl-IO-Compress-Zlib [ 3s] breaking dependency perl -> perl-IO-Compress-Zlib [ 3s] cycle: perl -> perl-IO-Compress-Base [ 3s] breaking dependency perl -> perl-IO-Compress-Base [ 3s] cycle: perl -> perl-Module-Pluggable [ 3s] breaking dependency perl -> perl-Module-Pluggable [ 3s] cycle: perl -> perl-Pod-Simple [ 3s] breaking dependency perl -> perl-Pod-Simple [ 3s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 3s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 3s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 3s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 3s] cycle: nss -> nss-sysinit [ 3s] breaking dependency nss -> nss-sysinit [ 3s] cycle: perl-CPAN -> perl-Test-Harness [ 3s] breaking dependency perl-Test-Harness -> perl-CPAN [ 3s] cycle: rpm-libs -> rpm [ 3s] breaking dependency rpm-libs -> rpm [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 15s] Waiting for device /dev/vda to appear: ok [ 15s] fsck from util-linux 2.21.2 [ 15s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 15s] /dev/vda: clean, 4708/2392064 files, 237548/9568256 blocks [ 15s] fsck succeeded. Mounting root device read-write. [ 15s] Mounting root /dev/vda [ 15s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 17s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 31s] 2nd stage started in virtual machine [ 32s] machine type: armv7l [ 32s] switching personality to 8... [ 32s] 2nd stage started in virtual machine [ 32s] machine type: armv7l [ 32s] /.build/build: line 770: mount: command not found [ 32s] swapon on /dev/vdb [ 33s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 33s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 34s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 35s] logging output to //.build.log... [ 36s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-misc-exynos.spec ... [ 36s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-misc-exynos.spec build rpmlint-Factory ... [ 45s] running rpm-x86-arm postinstall script [ 45s] running rpm-libs-x86-arm postinstall script [ 46s] running tizen-accelerator postinstall script [ 48s] running bash-x86-arm postinstall script [ 48s] initializing rpm db... [ 54s] [1/150] installing cross-armv7l-platformfile-0.0.1-3.1 [ 55s] [2/150] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 57s] [3/150] installing libX11-common-1.5.0-2.18 [ 67s] [4/150] installing tizen-release-2.2.0-3.1 [ 69s] [5/150] installing tzdata-2013h-1.134 [ 70s] [6/150] installing libgcc-4.6.4-3.11 [ 74s] [7/150] installing setup-0.1-3.1 [ 75s] [8/150] installing filesystem-0.1-3.1 [ 86s] warning: group lock does not exist - using root [ 87s] [9/150] installing eglibc-2.13-3.8 [ 88s] [10/150] installing libstdc++-4.6.4-3.11 [ 89s] [11/150] installing eglibc-common-2.13-3.8 [ 96s] [12/150] installing libstdc++-devel-4.6.4-3.11 [ 98s] [13/150] installing bash-4.1-3.1 [ 99s] [14/150] installing bzip2-libs-1.0.5-3.2 [ 101s] [15/150] installing cpio-2.8-1.135 [ 102s] [16/150] installing diffutils-3.0-3.1 [ 106s] [17/150] installing e2fsprogs-libs-1.41.9-1.53 [ 107s] [18/150] installing elfutils-libelf-0.152-3.7 [ 108s] [19/150] installing fdupes-1.40-3.1 [ 109s] [20/150] installing findutils-4.2.31-2.134 [ 109s] [21/150] installing gdbm-1.8.3-3.3 [ 109s] [22/150] installing libXau-1.0.7-1.128 [ 109s] [23/150] installing libattr-2.4.44-3.3 [ 109s] [24/150] installing libgomp-4.6.4-3.11 [ 110s] [25/150] installing liblua-5.1.4-3.2 [ 110s] [26/150] installing libuuid-2.20.2-1.127 [ 111s] [27/150] installing lzo-2.03-3.3 [ 111s] [28/150] installing m4-1.4.14-3.1 [ 112s] [29/150] installing net-tools-1.60-3.1 [ 112s] [30/150] installing nspr-4.9-3.5 [ 113s] [31/150] installing nss-softokn-freebl-3.12.9-3.9 [ 113s] [32/150] installing patch-2.6-1.136 [ 113s] [33/150] installing pkg-config-0.25-2.2 [ 114s] [34/150] installing popt-1.16-3.2 [ 115s] [35/150] installing readline-5.2-3.2 [ 115s] [36/150] installing sed-4.1.5-3.1 [ 115s] [37/150] installing smack-1.0+s14-3.2 [ 116s] [38/150] installing sqlite-3.7.13-3.2 [ 116s] [39/150] installing tar-1.17-3.2 [ 117s] [40/150] installing xz-libs-5.0.3-3.3 [ 117s] [41/150] installing zlib-1.2.5-3.7 [ 117s] [42/150] installing gmp-4.2.1-3.2 [ 118s] [43/150] installing libpcre-7.7-3.3 [ 118s] [44/150] installing ncurses-libs-5.7-3.2 [ 119s] [45/150] installing build-compare-2009.10.14-3.4 [ 119s] [46/150] installing qemu.x86_64-1.2-5.1 [ 124s] [47/150] installing eglibc-headers-2.13-3.8 [ 125s] [48/150] installing libcap-2.21-3.2 [ 125s] [49/150] installing unzip-6.0-3.4 [ 125s] [50/150] installing zlib-devel-1.2.5-3.7 [ 125s] [51/150] installing grep-2.5.1a-3.1 [ 126s] [52/150] installing libacl-2.2.49-3.2 [ 126s] [53/150] installing libfile-5.04-3.2 [ 127s] [54/150] installing libxcb-1.8.1-2.25 [ 127s] [55/150] installing lzo-minilzo-2.03-3.3 [ 128s] [56/150] installing make-3.82-3.2 [ 128s] [57/150] installing mpfr-3.0.0-3.2 [ 129s] [58/150] installing ncurses-5.7-3.2 [ 129s] [59/150] installing bzip2-1.0.5-3.2 [ 129s] [60/150] installing libblkid-2.20.2-1.127 [ 130s] [61/150] installing smack-utils-1.0+s14-3.2 [ 131s] [62/150] installing xz-5.0.3-3.3 [ 131s] [63/150] installing binutils-2.22-3.4 [ 132s] [64/150] installing elfutils-libs-0.152-3.7 [ 132s] [65/150] installing nss-3.12.9-3.9 [ 133s] [66/150] installing perl-5.12.1-3.1 [ 138s] [67/150] installing ncurses-base-5.7-3.2 [ 138s] [68/150] installing perl-HTML-Tagset-3.20-3.1 [ 138s] [69/150] installing perl-IO-Compress-Base-2.008-3.1 [ 139s] [70/150] installing perl-Module-Pluggable-3.60-3.1 [ 139s] [71/150] installing perl-Pod-Escapes-1.04-3.1 [ 139s] [72/150] installing perl-TimeDate-1.20-3.1 [ 139s] [73/150] installing eglibc-devel-2.13-3.8 [ 139s] [74/150] installing file-5.04-3.2 [ 140s] [75/150] installing lzo-devel-2.03-3.3 [ 140s] [76/150] installing perl-Compress-Raw-Zlib-2.008-3.1 [ 140s] [77/150] installing perl-devel-5.12.1-3.1 [ 141s] [78/150] installing perl-libs-5.12.1-3.1 [ 141s] [79/150] installing coreutils-6.9-3.3 [ 141s] [80/150] installing libX11-1.5.0-2.18 [ 142s] [81/150] installing libdlog-0.4.1-3.18 [ 142s] [82/150] installing libmount-2.20.2-1.127 [ 142s] [83/150] installing mpc-0.9-3.2 [ 142s] [84/150] installing xz-lzma-compat-5.0.3-3.3 [ 142s] [85/150] installing elfutils-0.152-3.7 [ 142s] [86/150] installing nss-sysinit-3.12.9-3.9 [ 143s] [87/150] installing rpm-libs-4.9.1-4.1 [ 143s] [88/150] installing perl-ExtUtils-ParseXS-2.18-3.1 [ 143s] [89/150] installing perl-Pod-Simple-3.07-3.1 [ 144s] [90/150] installing perl-Test-Simple-0.80-3.1 [ 144s] [91/150] installing tizen-accelerator-1.0.1-3.1 [ 145s] [92/150] installing libxkbfile-1.0.8-1.14 [ 145s] [93/150] installing perl-IO-Compress-Zlib-2.008-3.1 [ 145s] [94/150] installing perl-Test-Harness-3.12-3.1 [ 146s] [95/150] installing dlogutil-0.4.1-3.18 [ 146s] /var/tmp/rpm-tmp.3OIWTr: line 1: systemctl: command not found [ 146s] warning: %post(dlogutil-0.4.1-3.18.armv7l) scriptlet failed, exit status 127 [ 146s] [96/150] installing gawk-3.1.5-3.1 [ 147s] [97/150] installing gzip-1.3.12-1.13 [ 147s] [98/150] installing build-2011.01.10a-3.1 [ 148s] [99/150] installing rpm-4.9.1-4.1 [ 148s] [100/150] installing cpp-4.6.4-3.11 [ 149s] [101/150] installing util-linux-2.20.2-1.127 [ 151s] [102/150] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 152s] [103/150] installing eglibc-x86-arm-2.13-2.3 [ 154s] [104/150] installing elfutils-libelf-x86-arm-0.152-2.1 [ 154s] [105/150] installing elfutils-libs-x86-arm-0.152-2.3 [ 154s] [106/150] installing gmp-x86-arm-4.2.1-2.1 [ 155s] [107/150] installing libacl-x86-arm-2.2.49-2.1 [ 156s] [108/150] installing libattr-x86-arm-2.4.44-2.1 [ 156s] [109/150] installing libcap-x86-arm-2.21-2.1 [ 156s] [110/150] installing libfile-x86-arm-5.04-2.2 [ 157s] [111/150] installing libgcc-x86-arm-4.6.4-2.1 [ 157s] [112/150] installing liblua-x86-arm-5.1.4-2.1 [ 158s] [113/150] installing mpc-x86-arm-0.9-2.1 [ 158s] [114/150] installing mpfr-x86-arm-3.0.0-2.1 [ 166s] [115/150] installing ncurses-libs-x86-arm-5.7-2.2 [ 167s] [116/150] installing nspr-x86-arm-4.9-2.3 [ 167s] [117/150] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 168s] [118/150] installing nss-x86-arm-3.12.9-2.3 [ 170s] [119/150] installing perl-ExtUtils-MakeMaker-6.36-3.1 [ 171s] [120/150] installing popt-x86-arm-1.16-2.1 [ 171s] [121/150] installing rpm-libs-x86-arm-4.9.1-2.2 [ 172s] [122/150] installing sqlite-x86-arm-3.7.13-2.1 [ 173s] [123/150] installing xz-libs-x86-arm-5.0.3-2.1 [ 173s] [124/150] installing zlib-x86-arm-1.2.5-2.1 [ 173s] [125/150] installing xorg-x11-xkb-utils-7.9.1-2.10 [ 174s] [126/150] installing gcc-4.6.4-3.11 [ 175s] [127/150] installing rpm-build-4.9.1-4.1 [ 176s] [128/150] installing xkeyboard-config-2.9.1-1.23 [ 176s] [129/150] installing perl-CPAN-1.9205-3.1 [ 176s] [130/150] installing bash-x86-arm-4.1-2.1 [ 177s] [131/150] installing fdupes-x86-arm-1.40-2.1 [ 178s] [132/150] installing findutils-x86-arm-4.2.31-2.1 [ 178s] [133/150] installing gawk-x86-arm-3.1.5-2.2 [ 178s] [134/150] installing gzip-x86-arm-1.3.12-2.1 [ 178s] [135/150] installing make-x86-arm-3.82-2.1 [ 180s] [136/150] installing sed-x86-arm-4.1.5-2.1 [ 180s] [137/150] installing tar-x86-arm-1.17-2.2 [ 180s] [138/150] installing diffutils-x86-arm-3.0-2.1 [ 181s] [139/150] installing patch-x86-arm-2.6-2.1 [ 181s] [140/150] installing autoconf-2.68-3.1 [ 182s] [141/150] installing coreutils-x86-arm-6.9-2.1 [ 184s] [142/150] installing file-x86-arm-5.04-2.1 [ 184s] [143/150] installing elfutils-x86-arm-0.152-2.3 [ 185s] [144/150] installing gcc-c++-4.6.4-3.11 [ 186s] [145/150] installing rpm-x86-arm-4.9.1-2.2 [ 191s] /bin/rpm.orig-arm already present - skipping. [ 191s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 191s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 191s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 191s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 191s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 191s] [146/150] installing rpm-build-x86-arm-4.9.1-2.2 [ 192s] [147/150] installing automake-1.11.1-3.1 [ 193s] [148/150] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.3 [ 199s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 199s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 199s] [149/150] installing libtool-2.2.6b-3.2 [ 199s] [150/150] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 201s] removing nis flags from //etc/nsswitch.conf... [ 201s] now finalizing build dir... [ 201s] /.build/build: line 2585: mount: command not found [ 201s] /.build/build: line 2586: mount: command not found [ 207s] build target is armv7l-tizen-linux [ 207s] ----------------------------------------------------------------- [ 207s] I have the following modifications for xorg-x11-misc-exynos.spec: [ 207s] 6c6 [ 207s] < Release: 1 [ 207s] --- [ 207s] > Release: 3.1 [ 207s] ----------------------------------------------------------------- [ 207s] ----- building xorg-x11-misc-exynos.spec (user abuild) [ 207s] ----------------------------------------------------------------- [ 207s] ----------------------------------------------------------------- [ 207s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/9ab772d4929c861a41ce24c969ef94bb-xorg-x11-misc-exynos' /home/abuild/rpmbuild/SOURCES/xorg-x11-misc-exynos.spec [ 207s] Building target platforms: armv7l-tizen-linux [ 207s] Building for target armv7l-tizen-linux [ 207s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.kGgGML [ 207s] + umask 022 [ 207s] + cd /home/abuild/rpmbuild/BUILD [ 207s] + LANG=C [ 207s] + export LANG [ 207s] + unset DISPLAY [ 207s] + cd /home/abuild/rpmbuild/BUILD [ 207s] + rm -rf xorg-x11-misc-exynos-0.0.41 [ 207s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-misc-exynos-0.0.41.tar.gz [ 207s] + /bin/tar -xf - [ 207s] + STATUS=0 [ 207s] + '[' 0 -ne 0 ']' [ 207s] + cd xorg-x11-misc-exynos-0.0.41 [ 207s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 207s] + exit 0 [ 207s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.FDaZG5 [ 207s] + umask 022 [ 207s] + cd /home/abuild/rpmbuild/BUILD [ 207s] + cd xorg-x11-misc-exynos-0.0.41 [ 207s] + LANG=C [ 207s] + export LANG [ 207s] + unset DISPLAY [ 207s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 207s] + export CFLAGS [ 207s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 207s] + export CXXFLAGS [ 207s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 207s] + export FFLAGS [ 207s] + LD_AS_NEEDED=1 [ 207s] + export LD_AS_NEEDED [ 207s] + cd wearable [ 207s] ++ find arm-common/ -name '*.in' [ 207s] + for f in '`find arm-common/ -name "*.in"`' [ 207s] + cat arm-common/startx.in [ 207s] + sed -i -e s#@PREFIX@#/usr#g arm-common/startx [ 207s] + sed -i -e s#@DATADIR@#/opt#g arm-common/startx [ 207s] + chmod a+x arm-common/startx [ 207s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 207s] + export CFLAGS [ 207s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 207s] + export CXXFLAGS [ 207s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 207s] + export FFLAGS [ 207s] + autoreconf -v --install --force [ 210s] autoreconf: Entering directory `.' [ 210s] autoreconf: configure.ac: not using Gettext [ 212s] autoreconf: running: aclocal --force [ 225s] autoreconf: configure.ac: tracing [ 230s] autoreconf: running: libtoolize --copy --force [ 230s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. [ 230s] libtoolize: copying file `./ltmain.sh' [ 231s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 231s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 231s] libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 241s] autoreconf: running: /usr/bin/autoconf --force [ 250s] autoreconf: running: /usr/bin/autoheader --force [ 256s] autoreconf: running: automake --add-missing --copy --force-missing [ 259s] configure.ac:42: installing `./config.guess' [ 259s] configure.ac:42: installing `./config.sub' [ 259s] configure.ac:29: installing `./install-sh' [ 259s] configure.ac:36: installing `./missing' [ 260s] autoreconf: Leaving directory `.' [ 260s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-arch=arm --with-conf-prefix=/ [ 261s] checking for a BSD-compatible install... /usr/bin/install -c [ 261s] checking whether make sets $(MAKE)... yes [ 262s] checking whether build environment is sane... yes [ 262s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 262s] checking for gawk... gawk [ 262s] checking whether to enable maintainer-specific portions of Makefiles... no [ 262s] checking build system type... armv7l-unknown-linux-gnueabi [ 262s] checking host system type... armv7l-unknown-linux-gnueabi [ 262s] checking for style of include used by make... GNU [ 262s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 262s] checking for gcc... gcc [ 262s] checking whether the C compiler works... yes [ 262s] checking for C compiler default output file name... a.out [ 262s] checking for suffix of executables... [ 262s] checking whether we are cross compiling... no [ 262s] checking for suffix of object files... o [ 262s] checking whether we are using the GNU C compiler... yes [ 262s] checking whether gcc accepts -g... yes [ 262s] checking for gcc option to accept ISO C89... none needed [ 262s] checking dependency style of gcc... none [ 262s] checking for a sed that does not truncate output... /bin/sed [ 262s] checking for grep that handles long lines and -e... /bin/grep [ 262s] checking for egrep... /bin/grep -E [ 262s] checking for fgrep... /bin/grep -F [ 262s] checking for ld used by gcc... /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld [ 262s] checking if the linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) is GNU ld... yes [ 262s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 262s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 262s] checking whether ln -s works... yes [ 262s] checking the maximum length of command line arguments... 1572864 [ 262s] checking whether the shell understands some XSI constructs... yes [ 262s] checking whether the shell understands "+="... yes [ 262s] checking for /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld option to reload object files... -r [ 262s] checking for armv7l-unknown-linux-gnueabi-objdump... no [ 262s] checking for objdump... objdump [ 262s] checking how to recognize dependent libraries... pass_all [ 262s] checking for armv7l-unknown-linux-gnueabi-ar... no [ 262s] checking for ar... ar [ 262s] checking for armv7l-unknown-linux-gnueabi-strip... no [ 262s] checking for strip... strip [ 262s] checking for armv7l-unknown-linux-gnueabi-ranlib... no [ 262s] checking for ranlib... ranlib [ 262s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 262s] checking how to run the C preprocessor... gcc -E [ 263s] checking for ANSI C header files... yes [ 263s] checking for sys/types.h... yes [ 263s] checking for sys/stat.h... yes [ 263s] checking for stdlib.h... yes [ 263s] checking for string.h... yes [ 263s] checking for memory.h... yes [ 263s] checking for strings.h... yes [ 263s] checking for inttypes.h... yes [ 263s] checking for stdint.h... yes [ 263s] checking for unistd.h... yes [ 263s] checking for dlfcn.h... yes [ 263s] checking for objdir... .libs [ 263s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 263s] checking for gcc option to produce PIC... -fPIC -DPIC [ 263s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 263s] checking if gcc static flag -static works... no [ 263s] checking if gcc supports -c -o file.o... yes [ 263s] checking if gcc supports -c -o file.o... (cached) yes [ 263s] checking whether the gcc linker (/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.6.4/ld) supports shared libraries... yes [ 263s] checking whether -lc should be explicitly linked in... no [ 263s] checking dynamic linker characteristics... GNU/Linux ld.so [ 263s] checking how to hardcode library paths into programs... immediate [ 263s] checking whether stripping libraries is possible... yes [ 263s] checking if libtool supports shared libraries... yes [ 263s] checking whether to build shared libraries... yes [ 263s] checking whether to build static libraries... no [ 263s] checking for armv7l-unknown-linux-gnueabi-gcc... gcc [ 263s] checking whether we are using the GNU C compiler... (cached) yes [ 263s] checking whether gcc accepts -g... (cached) yes [ 263s] checking for gcc option to accept ISO C89... (cached) none needed [ 263s] checking dependency style of gcc... (cached) none [ 263s] configure: creating ./config.status [ 264s] config.status: creating Makefile [ 264s] config.status: creating config.h [ 264s] config.status: executing depfiles commands [ 264s] config.status: executing libtool commands [ 264s] + make -j4 [ 264s] make all-am [ 264s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-misc-exynos-0.0.41/wearable' [ 264s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-misc-exynos-0.0.41/wearable' [ 264s] + exit 0 [ 264s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ky3iXS [ 264s] + umask 022 [ 264s] + cd /home/abuild/rpmbuild/BUILD [ 264s] + cd xorg-x11-misc-exynos-0.0.41 [ 264s] + LANG=C [ 264s] + export LANG [ 264s] + unset DISPLAY [ 264s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] + cd wearable [ 264s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/share/license [ 264s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/share/license/xorg-x11-misc-exynos [ 264s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm install [ 264s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-misc-exynos-0.0.41/wearable' [ 264s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin" [ 264s] /usr/bin/install -c ./arm-common/startx '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin' [ 264s] test -z "//etc/X11" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm//etc/X11" [ 264s] /usr/bin/install -c -m 644 ./arm-common/xorg.conf ./arm-common/Xresources '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm//etc/X11' [ 264s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-misc-exynos-0.0.41/wearable' [ 264s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/share/info/dir [ 264s] + xargs rm -f -- [ 264s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm -regex '.*\.la$' [ 264s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm -regex '.*\.a$' [ 264s] + xargs rm -f -- [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/profile.d/ [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/X11/ [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/opt/etc/dump.d/module.d [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin/ [ 264s] + cp -af arm-common/xsetrc /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/X11/ [ 264s] + cp -af arm-common/Xmodmap /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/X11/ [ 264s] + cp -af arm-common/xinitrc /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/X11/ [ 264s] + cp -af arm-common/winsys_log_dump.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/opt/etc/dump.d/module.d [ 264s] + cp -af arm-common/screenshot /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin/ [ 264s] + cp -af arm-common/screenshot-arm /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin/ [ 264s] + cp -af arm-common/Xorg.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/profile.d/ [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/basic.target.wants [ 264s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/xorg.service.wearable /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/xorg.service [ 264s] + ln -s ../xorg.service /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/basic.target.wants/xorg.service [ 264s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/multi-user.target.wants [ 264s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/xresources.service.wearable /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/xresources.service [ 264s] + ln -s ../xresources.service.wearable /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/multi-user.target.wants/xresources.service [ 264s] + install -m 0644 /home/abuild/rpmbuild/SOURCES/xscim.service /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/xscim.service [ 264s] + ln -s ../xscim.service /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/lib/systemd/system/multi-user.target.wants/xscim.service [ 264s] + cp -rf arm-e4412/xorg.conf.d /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/etc/X11/ [ 264s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-misc-exynos-0.0.41 [ 264s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm/usr/bin/screenshot-arm [ 264s] cpio: /home/abuild/samba/src/winsys/sample_apps/utilx_apps/screehshot: Cannot stat: No such file or directory [ 264s] 0 blocks [ 264s] + /usr/lib/rpm/check-buildroot [ 264s] + /usr/lib/rpm//brp-compress [ 264s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 264s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 264s] + /usr/lib/rpm/brp-python-hardlink [ 264s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] Processing files: xorg-x11-misc-exynos-0.0.41-3.1.armv7l [ 264s] Aptk: PG1hbmlmZXN0PgoJPHJlcXVlc3Q+CgkJPGRvbWFpbiBuYW1lPSJ4b3JnIi8+Cgk8 [ 264s] L3JlcXVlc3Q+Cgk8YXNzaWduPgoJCTxmaWxlc3lzdGVtIHBhdGg9Ii9vcHQvZXRj [ 264s] L2R1bXAuZC9tb2R1bGUuZC93aW5zeXNfbG9nX2R1bXAuc2giIGxhYmVsPSJfIiBl [ 264s] eGVjX2xhYmVsPSJub25lIiAvPgoJPC9hc3NpZ24+CjwvbWFuaWZlc3Q+Cg== [ 264s] [ 264s] Requires(interp): /bin/sh [ 264s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 264s] Requires(post): /bin/sh xkeyboard-config [ 264s] Requires: /bin/sh libX11.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libutilX.so.1 [ 264s] Processing files: xorg-x11-misc-exynos-debuginfo-0.0.41-3.1.armv7l [ 264s] Processing files: xorg-x11-misc-exynos-debugsource-0.0.41-3.1.armv7l [ 264s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-misc-exynos-0.0.41-3.1.src.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-0.0.41-3.1.armv7l.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-debuginfo-0.0.41-3.1.armv7l.rpm [ 264s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-debugsource-0.0.41-3.1.armv7l.rpm [ 264s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Ncpxz0 [ 264s] + umask 022 [ 264s] + cd /home/abuild/rpmbuild/BUILD [ 264s] + cd xorg-x11-misc-exynos-0.0.41 [ 264s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-misc-exynos-0.0.41-3.1.arm [ 264s] + exit 0 [ 264s] ... checking for files with abuild user/group [ 264s] ... creating baselibs [ 265s] ... saving built statistics [ 265s] /.build/build: line 3144: mount: command not found [ 265s] ERROR: no root disk device found, yet another new device name? [ 265s] ls: cannot access /sys/block/: No such file or directory [ 265s] /.build/build: line 3159: umount: command not found [ 265s] ... saving built packages [ 266s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-0.0.41-3.1.armv7l.rpm [ 266s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-debuginfo-0.0.41-3.1.armv7l.rpm [ 266s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-misc-exynos-debugsource-0.0.41-3.1.armv7l.rpm [ 266s] /home/abuild/rpmbuild/SRPMS/xorg-x11-misc-exynos-0.0.41-3.1.src.rpm [ 266s] /home/abuild/rpmbuild/OTHER/_statistics [ 266s] [ 266s] w20 finished "build xorg-x11-misc-exynos.spec" at Wed Feb 4 08:23:40 UTC 2015. [ 266s] [ 270s] [ 263.126588] SysRq : Power Off [ 270s] [ 263.236244] Power down. [ 270s] build: extracting built packages... [ 270s] xorg-x11-misc-exynos-0.0.41-3.1.armv7l.rpm [ 270s] xorg-x11-misc-exynos-debuginfo-0.0.41-3.1.armv7l.rpm [ 270s] xorg-x11-misc-exynos-debugsource-0.0.41-3.1.armv7l.rpm [ 270s] xorg-x11-misc-exynos-0.0.41-3.1.src.rpm [ 270s] _statistics Retried build at Wed Feb 4 03:34:08 2015 returned same result, skipped