[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w10 started "build _service:gbs:xorg-x11-proto-resource.spec" at Wed Feb 4 08:21:17 UTC 2015. [ 0s] [ 0s] Building xorg-x11-proto-resource for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 '747e370d41a6350fc849ae3e5f80ec35' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:xorg-x11-proto-resource.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:xorg-x11-proto-resource.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:xorg-x11-proto-resource.spec build rpmlint-Factory ... [ 0s] cycle: filesystem -> setup [ 0s] breaking dependency setup -> filesystem [ 0s] cycle: eglibc -> eglibc-common -> bash [ 0s] breaking dependency eglibc-common -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 0s] breaking dependency coreutils -> bash [ 0s] cycle: eglibc -> eglibc-common -> coreutils [ 0s] breaking dependency eglibc-common -> coreutils [ 0s] cycle: eglibc -> eglibc-common [ 0s] breaking dependency eglibc-common -> eglibc [ 0s] cycle: libgcc -> eglibc -> eglibc-common [ 0s] breaking dependency eglibc -> eglibc-common [ 0s] cycle: libgcc -> eglibc [ 0s] breaking dependency libgcc -> eglibc [ 0s] cycle: rpm-libs -> rpm [ 0s] breaking dependency rpm-libs -> rpm [ 0s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 1s] [21/57] preinstalling tar... [ 1s] [22/57] preinstalling xz-libs... [ 1s] [23/57] preinstalling zlib... [ 1s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 2s] [44/57] preinstalling libfile-x86-arm... [ 2s] [45/57] preinstalling libgcc-x86-arm... [ 2s] [46/57] preinstalling liblua-x86-arm... [ 2s] [47/57] preinstalling ncurses-libs-x86-arm... [ 2s] [48/57] preinstalling nspr-x86-arm... [ 2s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 2s] [50/57] preinstalling nss-x86-arm... [ 2s] [51/57] preinstalling popt-x86-arm... [ 2s] [52/57] preinstalling rpm-libs-x86-arm... [ 2s] [53/57] preinstalling sqlite-x86-arm... [ 2s] [54/57] preinstalling xz-libs-x86-arm... [ 2s] [55/57] preinstalling zlib-x86-arm... [ 2s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4682/2392064 files, 237219/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] switching personality to 8... [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] /.build/build: line 770: mount: command not found [ 10s] swapon on /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-proto-resource.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-proto-resource.spec build rpmlint-Factory ... [ 11s] running rpm-x86-arm postinstall script [ 11s] running rpm-libs-x86-arm postinstall script [ 11s] running tizen-accelerator postinstall script [ 12s] running bash-x86-arm postinstall script [ 12s] initializing rpm db... [ 17s] [1/140] installing cross-armv7l-platformfile-0.0.1-3.1 [ 17s] [2/140] installing kernel-headers-3.4-exynos3250-1.0.0-6.1 [ 17s] [3/140] installing tizen-release-2.2.0-3.1 [ 17s] [4/140] installing tzdata-2013h-3.1 [ 18s] [5/140] installing libgcc-4.6.4-3.11 [ 18s] [6/140] installing setup-0.1-3.1 [ 18s] [7/140] installing filesystem-0.1-3.1 [ 21s] warning: group lock does not exist - using root [ 23s] [8/140] installing eglibc-2.13-3.8 [ 24s] [9/140] installing libstdc++-4.6.4-3.11 [ 26s] [10/140] installing eglibc-common-2.13-3.8 [ 31s] [11/140] installing libstdc++-devel-4.6.4-3.11 [ 33s] [12/140] installing bash-4.1-3.1 [ 33s] [13/140] installing bzip2-libs-1.0.5-3.2 [ 33s] [14/140] installing cpio-2.8-3.1 [ 33s] [15/140] installing diffutils-3.0-3.1 [ 34s] [16/140] installing e2fsprogs-libs-1.41.9-1.53 [ 34s] [17/140] installing elfutils-libelf-0.152-3.7 [ 34s] [18/140] installing fdupes-1.40-3.1 [ 34s] [19/140] installing findutils-4.2.31-3.1 [ 34s] [20/140] installing gdbm-1.8.3-3.3 [ 35s] [21/140] installing libattr-2.4.44-3.3 [ 35s] [22/140] installing libgomp-4.6.4-3.11 [ 35s] [23/140] installing liblua-5.1.4-3.2 [ 35s] [24/140] installing libuuid-2.20.2-1.127 [ 36s] [25/140] installing lzo-2.03-3.3 [ 36s] [26/140] installing m4-1.4.14-3.1 [ 36s] [27/140] installing net-tools-1.60-3.1 [ 37s] [28/140] installing nspr-4.9-3.5 [ 37s] [29/140] installing nss-softokn-freebl-3.12.9-3.9 [ 38s] [30/140] installing patch-2.6-3.1 [ 38s] [31/140] installing pkg-config-0.25-2.2 [ 38s] [32/140] installing popt-1.16-3.2 [ 38s] [33/140] installing readline-5.2-3.2 [ 39s] [34/140] installing sed-4.1.5-3.1 [ 39s] [35/140] installing sqlite-3.7.13-3.2 [ 40s] [36/140] installing tar-1.17-3.2 [ 40s] [37/140] installing xz-libs-5.0.3-3.3 [ 40s] [38/140] installing zlib-1.2.5-3.7 [ 41s] [39/140] installing gmp-4.2.1-3.2 [ 41s] [40/140] installing libpcre-7.7-3.3 [ 41s] [41/140] installing ncurses-libs-5.7-3.2 [ 41s] [42/140] installing build-compare-2009.10.14-3.4 [ 41s] [43/140] installing qemu.x86_64-1.2-5.1 [ 44s] [44/140] installing xorg-x11-xutils-dev-7.7-3.1 [ 45s] [45/140] installing eglibc-headers-2.13-3.8 [ 45s] [46/140] installing libcap-2.21-3.2 [ 46s] [47/140] installing unzip-6.0-3.4 [ 46s] [48/140] installing zlib-devel-1.2.5-3.7 [ 46s] [49/140] installing grep-2.5.1a-3.1 [ 47s] [50/140] installing libacl-2.2.49-3.2 [ 47s] [51/140] installing libfile-5.04-3.2 [ 48s] [52/140] installing lzo-minilzo-2.03-3.3 [ 48s] [53/140] installing make-3.82-3.2 [ 48s] [54/140] installing mpfr-3.0.0-3.2 [ 48s] [55/140] installing ncurses-5.7-3.2 [ 48s] [56/140] installing bzip2-1.0.5-3.2 [ 48s] [57/140] installing libblkid-2.20.2-1.127 [ 49s] [58/140] installing xz-5.0.3-3.3 [ 49s] [59/140] installing binutils-2.22-3.4 [ 49s] [60/140] installing elfutils-libs-0.152-3.7 [ 49s] [61/140] installing nss-3.12.9-3.9 [ 49s] [62/140] installing perl-5.12.1-3.1 [ 64s] [63/140] installing ncurses-base-5.7-3.2 [ 64s] [64/140] installing perl-HTML-Tagset-3.20-3.1 [ 65s] [65/140] installing perl-IO-Compress-Base-2.008-3.1 [ 65s] [66/140] installing perl-Module-Pluggable-3.60-3.1 [ 65s] [67/140] installing perl-Pod-Escapes-1.04-3.1 [ 65s] [68/140] installing perl-TimeDate-1.20-3.1 [ 65s] [69/140] installing eglibc-devel-2.13-3.8 [ 65s] [70/140] installing file-5.04-3.2 [ 66s] [71/140] installing lzo-devel-2.03-3.3 [ 66s] [72/140] installing perl-Compress-Raw-Zlib-2.008-3.1 [ 66s] [73/140] installing perl-devel-5.12.1-3.1 [ 67s] [74/140] installing perl-libs-5.12.1-3.1 [ 68s] [75/140] installing coreutils-6.9-3.3 [ 69s] [76/140] installing libmount-2.20.2-1.127 [ 69s] [77/140] installing mpc-0.9-3.2 [ 71s] [78/140] installing xz-lzma-compat-5.0.3-3.3 [ 71s] [79/140] installing elfutils-0.152-3.7 [ 72s] [80/140] installing nss-sysinit-3.12.9-3.9 [ 73s] [81/140] installing rpm-libs-4.9.1-4.1 [ 73s] [82/140] installing perl-ExtUtils-ParseXS-2.18-3.1 [ 74s] [83/140] installing perl-Pod-Simple-3.07-3.1 [ 74s] [84/140] installing perl-Test-Simple-0.80-3.1 [ 75s] [85/140] installing tizen-accelerator-1.0.1-3.1 [ 75s] [86/140] installing perl-IO-Compress-Zlib-2.008-3.1 [ 77s] [87/140] installing perl-Test-Harness-3.12-3.1 [ 81s] [88/140] installing gawk-3.1.5-3.1 [ 82s] [89/140] installing gzip-1.3.12-3.1 [ 83s] [90/140] installing build-2011.01.10a-3.1 [ 83s] [91/140] installing rpm-4.9.1-4.1 [ 84s] [92/140] installing cpp-4.6.4-3.11 [ 85s] [93/140] installing util-linux-2.20.2-1.127 [ 87s] [94/140] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 88s] [95/140] installing eglibc-x86-arm-2.13-2.3 [ 90s] [96/140] installing elfutils-libelf-x86-arm-0.152-2.1 [ 90s] [97/140] installing elfutils-libs-x86-arm-0.152-2.3 [ 91s] [98/140] installing gmp-x86-arm-4.2.1-2.1 [ 91s] [99/140] installing libacl-x86-arm-2.2.49-2.1 [ 91s] [100/140] installing libattr-x86-arm-2.4.44-2.1 [ 92s] [101/140] installing libcap-x86-arm-2.21-2.1 [ 92s] [102/140] installing libfile-x86-arm-5.04-2.2 [ 92s] [103/140] installing libgcc-x86-arm-4.6.4-2.1 [ 93s] [104/140] installing liblua-x86-arm-5.1.4-2.1 [ 93s] [105/140] installing mpc-x86-arm-0.9-2.1 [ 94s] [106/140] installing mpfr-x86-arm-3.0.0-2.1 [ 94s] [107/140] installing ncurses-libs-x86-arm-5.7-2.2 [ 94s] [108/140] installing nspr-x86-arm-4.9-2.3 [ 94s] [109/140] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 94s] [110/140] installing nss-x86-arm-3.12.9-2.3 [ 95s] [111/140] installing perl-ExtUtils-MakeMaker-6.36-3.1 [ 95s] [112/140] installing popt-x86-arm-1.16-2.1 [ 95s] [113/140] installing rpm-libs-x86-arm-4.9.1-2.2 [ 96s] [114/140] installing sqlite-x86-arm-3.7.13-2.1 [ 96s] [115/140] installing xz-libs-x86-arm-5.0.3-2.1 [ 97s] [116/140] installing zlib-x86-arm-1.2.5-2.1 [ 97s] [117/140] installing gcc-4.6.4-3.11 [ 98s] [118/140] installing rpm-build-4.9.1-4.1 [ 99s] [119/140] installing perl-CPAN-1.9205-3.1 [ 99s] [120/140] installing bash-x86-arm-4.1-2.1 [ 100s] [121/140] installing fdupes-x86-arm-1.40-2.1 [ 100s] [122/140] installing findutils-x86-arm-4.2.31-2.1 [ 100s] [123/140] installing gawk-x86-arm-3.1.5-2.2 [ 101s] [124/140] installing gzip-x86-arm-1.3.12-2.1 [ 101s] [125/140] installing make-x86-arm-3.82-2.1 [ 101s] [126/140] installing sed-x86-arm-4.1.5-2.1 [ 102s] [127/140] installing tar-x86-arm-1.17-2.2 [ 102s] [128/140] installing diffutils-x86-arm-3.0-2.1 [ 103s] [129/140] installing patch-x86-arm-2.6-2.1 [ 113s] [130/140] installing autoconf-2.68-3.1 [ 114s] [131/140] installing coreutils-x86-arm-6.9-2.1 [ 117s] [132/140] installing file-x86-arm-5.04-2.1 [ 117s] [133/140] installing elfutils-x86-arm-0.152-2.3 [ 118s] [134/140] installing gcc-c++-4.6.4-3.11 [ 119s] [135/140] installing rpm-x86-arm-4.9.1-2.2 [ 121s] /bin/rpm.orig-arm already present - skipping. [ 121s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 121s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 121s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 121s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 121s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 121s] [136/140] installing rpm-build-x86-arm-4.9.1-2.2 [ 122s] [137/140] installing automake-1.11.1-3.1 [ 122s] [138/140] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.3 [ 126s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 126s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 126s] [139/140] installing libtool-2.2.6b-3.2 [ 128s] [140/140] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 131s] removing nis flags from //etc/nsswitch.conf... [ 131s] now finalizing build dir... [ 131s] /.build/build: line 2585: mount: command not found [ 131s] /.build/build: line 2586: mount: command not found [ 138s] build target is armv7l-tizen-linux [ 138s] ----------------------------------------------------------------- [ 138s] I have the following modifications for xorg-x11-proto-resource.spec: [ 138s] 5c5 [ 138s] < Release: 2 [ 138s] --- [ 138s] > Release: 3.1 [ 138s] ----------------------------------------------------------------- [ 138s] ----- building xorg-x11-proto-resource.spec (user abuild) [ 138s] ----------------------------------------------------------------- [ 138s] ----------------------------------------------------------------- [ 138s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/747e370d41a6350fc849ae3e5f80ec35-xorg-x11-proto-resource' /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-resource.spec [ 138s] Building target platforms: armv7l-tizen-linux [ 138s] Building for target armv7l-tizen-linux [ 138s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ANmpar [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + LANG=C [ 138s] + export LANG [ 138s] + unset DISPLAY [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + rm -rf xorg-x11-proto-resource-1.2.0 [ 138s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-proto-resource-1.2.0.tar.gz [ 138s] + /bin/tar -xf - [ 138s] + STATUS=0 [ 138s] + '[' 0 -ne 0 ']' [ 138s] + cd xorg-x11-proto-resource-1.2.0 [ 138s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 138s] + exit 0 [ 138s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MyMJ6u [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd xorg-x11-proto-resource-1.2.0 [ 138s] + LANG=C [ 138s] + export LANG [ 138s] + unset DISPLAY [ 138s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 138s] + export CFLAGS [ 138s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 138s] + export CXXFLAGS [ 138s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 138s] + export FFLAGS [ 138s] + LD_AS_NEEDED=1 [ 138s] + export LD_AS_NEEDED [ 138s] + ./autogen.sh [ 141s] autoreconf: Entering directory `.' [ 141s] autoreconf: configure.ac: not using Gettext [ 142s] autoreconf: running: aclocal [ 152s] autoreconf: configure.ac: tracing [ 157s] autoreconf: configure.ac: not using Libtool [ 157s] autoreconf: running: /usr/bin/autoconf [ 161s] autoreconf: configure.ac: not using Autoheader [ 161s] autoreconf: running: automake --add-missing --copy --no-force [ 166s] configure.ac:18: installing `./config.guess' [ 166s] configure.ac:18: installing `./config.sub' [ 166s] configure.ac:11: installing `./install-sh' [ 166s] configure.ac:11: installing `./missing' [ 167s] autoreconf: Leaving directory `.' [ 168s] checking for a BSD-compatible install... /usr/bin/install -c [ 169s] checking whether build environment is sane... yes [ 169s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 169s] checking for gawk... gawk [ 169s] checking whether make sets $(MAKE)... yes [ 169s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 169s] checking for style of include used by make... GNU [ 169s] checking for gcc... gcc [ 169s] checking whether the C compiler works... yes [ 169s] checking for C compiler default output file name... a.out [ 169s] checking for suffix of executables... [ 169s] checking whether we are cross compiling... no [ 169s] checking for suffix of object files... o [ 169s] checking whether we are using the GNU C compiler... yes [ 169s] checking whether gcc accepts -g... yes [ 169s] checking for gcc option to accept ISO C89... none needed [ 169s] checking dependency style of gcc... none [ 169s] checking for gcc option to accept ISO C99... -std=gnu99 [ 169s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 169s] checking for grep that handles long lines and -e... /bin/grep [ 169s] checking for egrep... /bin/grep -E [ 169s] checking for ANSI C header files... yes [ 169s] checking for sys/types.h... yes [ 169s] checking for sys/stat.h... yes [ 169s] checking for stdlib.h... yes [ 169s] checking for string.h... yes [ 169s] checking for memory.h... yes [ 169s] checking for strings.h... yes [ 169s] checking for inttypes.h... yes [ 169s] checking for stdint.h... yes [ 169s] checking for unistd.h... yes [ 170s] checking whether __clang__ is declared... no [ 170s] checking whether __INTEL_COMPILER is declared... no [ 170s] checking whether __SUNPRO_C is declared... no [ 170s] checking for pkg-config... /usr/bin/pkg-config [ 170s] checking pkg-config is at least version 0.9.0... yes [ 170s] checking build system type... armv7l-unknown-linux-gnueabi [ 170s] checking host system type... armv7l-unknown-linux-gnueabi [ 170s] checking for a sed that does not truncate output... /bin/sed [ 170s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 170s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 170s] checking if gcc -std=gnu99 supports-Wall... yes [ 170s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 170s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 170s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 170s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 170s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 170s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 170s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 170s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 170s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 170s] checking if gcc -std=gnu99 supports-Wunused... yes [ 170s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 170s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 170s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 170s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 170s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 170s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 170s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 171s] checking if gcc -std=gnu99 supports-pedantic... yes [ 171s] checking if gcc -std=gnu99 supports-Werror... yes [ 171s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 171s] configure: creating ./config.status [ 171s] config.status: creating Makefile [ 171s] config.status: creating resourceproto.pc [ 171s] config.status: executing depfiles commands [ 171s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 171s] + export CFLAGS [ 171s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 171s] + export CXXFLAGS [ 171s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 171s] + export FFLAGS [ 171s] + autoreconf -v --install --force [ 175s] autoreconf: Entering directory `.' [ 175s] autoreconf: configure.ac: not using Gettext [ 176s] autoreconf: running: aclocal --force [ 182s] autoreconf: configure.ac: tracing [ 187s] autoreconf: configure.ac: not using Libtool [ 187s] autoreconf: running: /usr/bin/autoconf --force [ 195s] autoreconf: configure.ac: not using Autoheader [ 195s] autoreconf: running: automake --add-missing --copy --force-missing [ 199s] autoreconf: Leaving directory `.' [ 199s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --libdir=/usr/share --without-xmlto [ 199s] configure: WARNING: unrecognized options: --disable-static, --without-xmlto [ 199s] checking for a BSD-compatible install... /usr/bin/install -c [ 200s] checking whether build environment is sane... yes [ 200s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 200s] checking for gawk... gawk [ 200s] checking whether make sets $(MAKE)... yes [ 200s] checking whether to enable maintainer-specific portions of Makefiles... no [ 200s] checking for style of include used by make... GNU [ 200s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 200s] checking for gcc... gcc [ 201s] checking whether the C compiler works... yes [ 201s] checking for C compiler default output file name... a.out [ 201s] checking for suffix of executables... [ 201s] checking whether we are cross compiling... no [ 201s] checking for suffix of object files... o [ 201s] checking whether we are using the GNU C compiler... yes [ 201s] checking whether gcc accepts -g... yes [ 201s] checking for gcc option to accept ISO C89... none needed [ 201s] checking dependency style of gcc... none [ 201s] checking for gcc option to accept ISO C99... -std=gnu99 [ 201s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 201s] checking for grep that handles long lines and -e... /bin/grep [ 201s] checking for egrep... /bin/grep -E [ 201s] checking for ANSI C header files... yes [ 201s] checking for sys/types.h... yes [ 201s] checking for sys/stat.h... yes [ 201s] checking for stdlib.h... yes [ 201s] checking for string.h... yes [ 201s] checking for memory.h... yes [ 201s] checking for strings.h... yes [ 201s] checking for inttypes.h... yes [ 201s] checking for stdint.h... yes [ 201s] checking for unistd.h... yes [ 201s] checking whether __clang__ is declared... no [ 201s] checking whether __INTEL_COMPILER is declared... no [ 201s] checking whether __SUNPRO_C is declared... no [ 201s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 201s] checking for pkg-config... /usr/bin/pkg-config [ 201s] checking pkg-config is at least version 0.9.0... yes [ 201s] checking build system type... armv7l-unknown-linux-gnueabi [ 201s] checking host system type... armv7l-unknown-linux-gnueabi [ 201s] checking for a sed that does not truncate output... /bin/sed [ 201s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 201s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 202s] checking if gcc -std=gnu99 supports-Wall... yes [ 202s] checking if gcc -std=gnu99 supports-Wpointer-arith... yes [ 202s] checking if gcc -std=gnu99 supports-Wmissing-declarations... yes [ 202s] checking if gcc -std=gnu99 supports-Wformat=2... yes [ 202s] checking if gcc -std=gnu99 supports-Wstrict-prototypes... yes [ 202s] checking if gcc -std=gnu99 supports-Wmissing-prototypes... yes [ 202s] checking if gcc -std=gnu99 supports-Wnested-externs... yes [ 202s] checking if gcc -std=gnu99 supports-Wbad-function-cast... yes [ 202s] checking if gcc -std=gnu99 supports-Wold-style-definition... yes [ 202s] checking if gcc -std=gnu99 supports-Wdeclaration-after-statement... yes [ 202s] checking if gcc -std=gnu99 supports-Wunused... yes [ 202s] checking if gcc -std=gnu99 supports-Wuninitialized... yes [ 202s] checking if gcc -std=gnu99 supports-Wshadow... yes [ 202s] checking if gcc -std=gnu99 supports-Wcast-qual... yes [ 202s] checking if gcc -std=gnu99 supports-Wmissing-noreturn... yes [ 202s] checking if gcc -std=gnu99 supports-Wmissing-format-attribute... yes [ 202s] checking if gcc -std=gnu99 supports-Wredundant-decls... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=implicit... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=nonnull... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=init-self... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=main... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=missing-braces... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=sequence-point... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=return-type... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=trigraphs... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=array-bounds... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=write-strings... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=address... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=int-to-pointer-cast... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=pointer-to-int-cast... yes [ 202s] checking if gcc -std=gnu99 supports-pedantic... yes [ 202s] checking if gcc -std=gnu99 supports-Werror... yes [ 202s] checking if gcc -std=gnu99 supports-Werror=attributes... yes [ 202s] configure: creating ./config.status [ 203s] config.status: creating Makefile [ 203s] config.status: creating resourceproto.pc [ 203s] config.status: executing depfiles commands [ 203s] configure: WARNING: unrecognized options: --disable-static, --without-xmlto [ 203s] + make -j4 [ 203s] make: Nothing to be done for `all'. [ 203s] + exit 0 [ 203s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3ghK2v [ 203s] + umask 022 [ 203s] + cd /home/abuild/rpmbuild/BUILD [ 203s] + cd xorg-x11-proto-resource-1.2.0 [ 203s] + LANG=C [ 203s] + export LANG [ 203s] + unset DISPLAY [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] + /usr/bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm install [ 203s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-resource-1.2.0' [ 203s] make[1]: Nothing to be done for `install-exec-am'. [ 203s] test -z "/usr/share/doc/resourceproto" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/doc/resourceproto" [ 203s] /usr/bin/install -c -m 644 resproto.txt '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/doc/resourceproto' [ 203s] test -z "/usr/share/pkgconfig" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/pkgconfig" [ 203s] /usr/bin/install -c -m 644 resourceproto.pc '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/pkgconfig' [ 203s] test -z "/usr/include/X11/extensions" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/include/X11/extensions" [ 203s] /usr/bin/install -c -m 644 XResproto.h '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/include/X11/extensions' [ 203s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-proto-resource-1.2.0' [ 203s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/info/dir [ 203s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm -regex '.*\.la$' [ 203s] + xargs rm -f -- [ 203s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm -regex '.*\.a$' [ 203s] + xargs rm -f -- [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/info [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/doc [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/doc/xorg-x11-proto-resource [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/gtk-doc [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm/usr/share/man [ 203s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 203s] + xargs rm -f -- [ 203s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 203s] + xargs rm -f -- [ 203s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 203s] + xargs rm -f -- [ 203s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-proto-resource-1.2.0 [ 203s] + /usr/lib/rpm/check-buildroot [ 203s] + /usr/lib/rpm//brp-compress [ 203s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 203s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 203s] + /usr/lib/rpm/brp-python-hardlink [ 203s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] Processing files: xorg-x11-proto-resource-1.2.0-3.1.armv7l [ 203s] Provides: pkgconfig(resourceproto) = 1.2.0 resourceproto [ 203s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 203s] Requires: /usr/bin/pkg-config [ 203s] Processing files: xorg-x11-proto-resource-debuginfo-1.2.0-3.1.armv7l [ 203s] Processing files: xorg-x11-proto-resource-debugsource-1.2.0-3.1.armv7l [ 203s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-proto-resource-1.2.0-3.1.src.rpm [ 203s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-1.2.0-3.1.armv7l.rpm [ 203s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-debuginfo-1.2.0-3.1.armv7l.rpm [ 203s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-debugsource-1.2.0-3.1.armv7l.rpm [ 203s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.PpumCH [ 203s] + umask 022 [ 203s] + cd /home/abuild/rpmbuild/BUILD [ 203s] + cd xorg-x11-proto-resource-1.2.0 [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-proto-resource-1.2.0-3.1.arm [ 203s] + exit 0 [ 203s] ... checking for files with abuild user/group [ 203s] ... creating baselibs [ 204s] ... saving built statistics [ 204s] /.build/build: line 3144: mount: command not found [ 204s] ERROR: no root disk device found, yet another new device name? [ 204s] ls: cannot access /sys/block/: No such file or directory [ 204s] /.build/build: line 3159: umount: command not found [ 204s] ... saving built packages [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-1.2.0-3.1.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-debuginfo-1.2.0-3.1.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-proto-resource-debugsource-1.2.0-3.1.armv7l.rpm [ 204s] /home/abuild/rpmbuild/SRPMS/xorg-x11-proto-resource-1.2.0-3.1.src.rpm [ 204s] /home/abuild/rpmbuild/OTHER/_statistics [ 204s] [ 204s] w10 finished "build xorg-x11-proto-resource.spec" at Wed Feb 4 08:24:40 UTC 2015. [ 204s] [ 207s] [ 199.673635] SysRq : Power Off [ 207s] [ 199.680951] Power down. [ 208s] build: extracting built packages... [ 209s] xorg-x11-proto-resource-1.2.0-3.1.armv7l.rpm [ 209s] xorg-x11-proto-resource-debuginfo-1.2.0-3.1.armv7l.rpm [ 209s] xorg-x11-proto-resource-debugsource-1.2.0-3.1.armv7l.rpm [ 209s] xorg-x11-proto-resource-1.2.0-3.1.src.rpm [ 209s] _statistics Retried build at Wed Feb 4 03:30:11 2015 returned same result, skipped