[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:xorg-x11-utils.spec" at Wed Feb 4 12:38:09 UTC 2015. [ 0s] [ 0s] Building xorg-x11-utils for project 'Tizen:2.3:Wearable' repository 'target' arch 'armv7l' srcmd5 'c3428952408b87ea9a2eca764d77b04d' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-utils.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-utils.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:xorg-x11-utils.spec build rpmlint-Factory ... [ 1s] cycle: filesystem -> setup [ 1s] breaking dependency setup -> filesystem [ 1s] cycle: eglibc -> eglibc-common -> bash [ 1s] breaking dependency eglibc-common -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils -> bash [ 1s] breaking dependency coreutils -> bash [ 1s] cycle: eglibc -> eglibc-common -> coreutils [ 1s] breaking dependency eglibc-common -> coreutils [ 1s] cycle: eglibc -> eglibc-common [ 1s] breaking dependency eglibc-common -> eglibc [ 1s] cycle: libgcc -> eglibc -> eglibc-common [ 1s] breaking dependency eglibc -> eglibc-common [ 1s] cycle: libgcc -> eglibc [ 1s] breaking dependency libgcc -> eglibc [ 1s] cycle: rpm-libs -> rpm [ 1s] breaking dependency rpm-libs -> rpm [ 1s] [1/57] preinstalling tizen-release... [ 1s] [2/57] preinstalling libgcc... [ 1s] [3/57] preinstalling setup... [ 1s] [4/57] preinstalling filesystem... [ 1s] [5/57] preinstalling eglibc... [ 1s] [6/57] preinstalling eglibc-common... [ 1s] [7/57] preinstalling bash... [ 1s] [8/57] preinstalling bzip2-libs... [ 1s] [9/57] preinstalling diffutils... [ 1s] [10/57] preinstalling elfutils-libelf... [ 1s] [11/57] preinstalling libattr... [ 1s] [12/57] preinstalling liblua... [ 1s] [13/57] preinstalling libstdc++... [ 1s] [14/57] preinstalling ncurses-libs... [ 1s] [15/57] preinstalling nspr... [ 1s] [16/57] preinstalling nss-softokn-freebl... [ 1s] [17/57] preinstalling popt... [ 1s] [18/57] preinstalling readline... [ 1s] [19/57] preinstalling sed... [ 1s] [20/57] preinstalling sqlite... [ 2s] [21/57] preinstalling tar... [ 2s] [22/57] preinstalling xz-libs... [ 2s] [23/57] preinstalling zlib... [ 2s] [24/57] preinstalling qemu.x86_64... [ 2s] [25/57] preinstalling libcap... [ 2s] [26/57] preinstalling libacl... [ 2s] [27/57] preinstalling libfile... [ 2s] [28/57] preinstalling bzip2... [ 2s] [29/57] preinstalling nss... [ 2s] [30/57] preinstalling file... [ 2s] [31/57] preinstalling coreutils... [ 2s] [32/57] preinstalling rpm-libs... [ 2s] [33/57] preinstalling tizen-accelerator... [ 2s] [34/57] preinstalling rpm... [ 2s] [35/57] preinstalling gmp-x86-arm... [ 2s] [36/57] preinstalling mpc-x86-arm... [ 2s] [37/57] preinstalling mpfr-x86-arm... [ 2s] [38/57] preinstalling bzip2-libs-x86-arm... [ 2s] [39/57] preinstalling eglibc-x86-arm... [ 2s] [40/57] preinstalling elfutils-libelf-x86-arm... [ 2s] [41/57] preinstalling libacl-x86-arm... [ 2s] [42/57] preinstalling libattr-x86-arm... [ 2s] [43/57] preinstalling libcap-x86-arm... [ 3s] [44/57] preinstalling libfile-x86-arm... [ 3s] [45/57] preinstalling libgcc-x86-arm... [ 3s] [46/57] preinstalling liblua-x86-arm... [ 3s] [47/57] preinstalling ncurses-libs-x86-arm... [ 3s] [48/57] preinstalling nspr-x86-arm... [ 3s] [49/57] preinstalling nss-softokn-freebl-x86-arm... [ 3s] [50/57] preinstalling nss-x86-arm... [ 3s] [51/57] preinstalling popt-x86-arm... [ 3s] [52/57] preinstalling rpm-libs-x86-arm... [ 3s] [53/57] preinstalling sqlite-x86-arm... [ 3s] [54/57] preinstalling xz-libs-x86-arm... [ 3s] [55/57] preinstalling zlib-x86-arm... [ 3s] [56/57] preinstalling bash-x86-arm... [ 3s] [57/57] preinstalling rpm-x86-arm... [ 3s] [ 3s] cycle: perl -> perl-libs [ 3s] breaking dependency perl-libs -> perl [ 3s] [1/8] preinstalling e2fsprogs-libs... [ 3s] [2/8] preinstalling libpcre... [ 3s] [3/8] preinstalling libuuid... [ 3s] [4/8] preinstalling grep... [ 3s] [5/8] preinstalling libblkid... [ 3s] [6/8] preinstalling util-linux... [ 3s] [7/8] preinstalling perl-libs... [ 3s] [8/8] preinstalling perl... [ 3s] copying packages... [ 4s] reordering...cycle: bash -> eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> bash [ 4s] cycle: bash -> eglibc -> eglibc-common -> coreutils [ 4s] breaking dependency eglibc-common -> coreutils [ 4s] cycle: eglibc -> eglibc-common [ 4s] breaking dependency eglibc-common -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> findutils [ 4s] breaking dependency eglibc-common -> findutils [ 4s] cycle: eglibc -> eglibc-common -> grep [ 4s] breaking dependency grep -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libgcc [ 4s] breaking dependency grep -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre [ 4s] breaking dependency libpcre -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libgcc [ 4s] breaking dependency libpcre -> libgcc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ [ 4s] breaking dependency libstdc++ -> eglibc [ 4s] cycle: eglibc -> eglibc-common -> grep -> libpcre -> libstdc++ -> libgcc [ 4s] breaking dependency eglibc-common -> grep [ 4s] cycle: eglibc -> eglibc-common -> libgcc [ 4s] breaking dependency eglibc -> eglibc-common [ 4s] cycle: eglibc -> libgcc [ 4s] breaking dependency libgcc -> eglibc [ 4s] cycle: filesystem -> setup [ 4s] breaking dependency setup -> filesystem [ 4s] cycle: ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses [ 4s] cycle: ncurses-base -> ncurses -> ncurses-libs [ 4s] breaking dependency ncurses-libs -> ncurses-base [ 4s] cycle: perl -> perl-libs [ 4s] breaking dependency perl -> perl-libs [ 4s] cycle: perl -> perl-ExtUtils-MakeMaker -> perl-devel [ 4s] breaking dependency perl -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl -> perl-IO-Compress-Zlib [ 4s] breaking dependency perl -> perl-IO-Compress-Zlib [ 4s] cycle: perl -> perl-IO-Compress-Base [ 4s] breaking dependency perl -> perl-IO-Compress-Base [ 4s] cycle: perl -> perl-Module-Pluggable [ 4s] breaking dependency perl -> perl-Module-Pluggable [ 4s] cycle: perl -> perl-Pod-Simple [ 4s] breaking dependency perl -> perl-Pod-Simple [ 4s] cycle: perl-devel -> perl-ExtUtils-MakeMaker [ 4s] breaking dependency perl-devel -> perl-ExtUtils-MakeMaker [ 4s] cycle: perl-ExtUtils-ParseXS -> perl-devel [ 4s] breaking dependency perl-devel -> perl-ExtUtils-ParseXS [ 4s] cycle: nss -> nss-sysinit [ 4s] breaking dependency nss -> nss-sysinit [ 4s] cycle: perl-CPAN -> perl-Test-Harness [ 4s] breaking dependency perl-Test-Harness -> perl-CPAN [ 4s] cycle: rpm-libs -> rpm [ 4s] breaking dependency rpm-libs -> rpm [ 4s] done [ 13s] booting kvm ... [ 13s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.i586 -m 8000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 6 [ 21s] doing fast boot [ 22s] Creating device nodes with udev [ 25s] Waiting for device /dev/vda to appear: ok [ 25s] fsck from util-linux 2.21.2 [ 25s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 25s] /dev/vda: clean, 4796/2392064 files, 238238/9568256 blocks [ 25s] fsck succeeded. Mounting root device read-write. [ 25s] Mounting root /dev/vda [ 25s] mount -o rw -t ext4 /dev/vda /root [ 27s] replacing /etc/mtab with symlink to /proc/self/mounts [ 29s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 42s] 2nd stage started in virtual machine [ 42s] machine type: armv7l [ 42s] switching personality to 8... [ 42s] 2nd stage started in virtual machine [ 42s] machine type: armv7l [ 42s] /.build/build: line 770: mount: command not found [ 42s] swapon on /dev/vdb [ 42s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 42s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 44s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 49s] logging output to //.build.log... [ 50s] processing specfile /.build-srcdir/_service:gbs:xorg-x11-utils.spec ... [ 50s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:xorg-x11-utils.spec build rpmlint-Factory ... [ 78s] running rpm-x86-arm postinstall script [ 80s] running rpm-libs-x86-arm postinstall script [ 80s] running tizen-accelerator postinstall script [ 83s] running bash-x86-arm postinstall script [ 83s] initializing rpm db... [ 101s] [1/199] installing cross-armv7l-platformfile-0.0.1-3.1 [ 101s] [2/199] installing kernel-headers-3.4-exynos3250-1.0.0-3.1 [ 104s] [3/199] installing libX11-common-1.5.0-3.1 [ 107s] [4/199] installing tizen-release-2.2.0-3.1 [ 108s] [5/199] installing tzdata-2013h-3.1 [ 109s] [6/199] installing libgcc-4.6.4-3.14 [ 109s] [7/199] installing setup-0.1-3.1 [ 112s] [8/199] installing filesystem-0.1-3.1 [ 116s] warning: group lock does not exist - using root [ 117s] [9/199] installing eglibc-2.13-3.9 [ 118s] [10/199] installing libstdc++-4.6.4-3.14 [ 120s] [11/199] installing eglibc-common-2.13-3.9 [ 125s] [12/199] installing libstdc++-devel-4.6.4-3.14 [ 125s] [13/199] installing bash-4.1-3.1 [ 126s] [14/199] installing bzip2-libs-1.0.5-3.2 [ 126s] [15/199] installing cpio-2.8-3.1 [ 126s] [16/199] installing diffutils-3.0-3.1 [ 127s] [17/199] installing e2fsprogs-libs-1.41.9-3.1 [ 128s] [18/199] installing elfutils-libelf-0.152-3.8 [ 129s] [19/199] installing expat-2.0.1-3.2 [ 129s] [20/199] installing fdupes-1.40-3.1 [ 129s] [21/199] installing findutils-4.2.31-3.1 [ 130s] [22/199] installing gdbm-1.8.3-3.3 [ 130s] [23/199] installing libICE-1.0.8-3.1 [ 130s] [24/199] installing libXau-1.0.7-3.1 [ 131s] [25/199] installing libattr-2.4.44-3.4 [ 131s] [26/199] installing libgomp-4.6.4-3.14 [ 132s] [27/199] installing liblua-5.1.4-3.2 [ 133s] [28/199] installing libuuid-2.20.2-3.1 [ 133s] [29/199] installing lzo-2.03-3.3 [ 133s] [30/199] installing m4-1.4.14-3.1 [ 134s] [31/199] installing net-tools-1.60-3.1 [ 135s] [32/199] installing nspr-4.9-3.6 [ 136s] [33/199] installing nss-softokn-freebl-3.12.9-3.11 [ 136s] [34/199] installing patch-2.6-3.1 [ 137s] [35/199] installing pkg-config-0.25-2.2 [ 138s] [36/199] installing popt-1.16-3.2 [ 141s] [37/199] installing readline-5.2-3.2 [ 141s] [38/199] installing sed-4.1.5-3.1 [ 142s] [39/199] installing smack-1.0+s14-3.2 [ 142s] [40/199] installing sqlite-3.7.13-3.2 [ 142s] [41/199] installing tar-1.17-3.2 [ 143s] [42/199] installing xz-libs-5.0.3-3.3 [ 143s] [43/199] installing zlib-1.2.5-3.8 [ 144s] [44/199] installing gmp-4.2.1-3.2 [ 144s] [45/199] installing libpcre-7.7-3.3 [ 145s] [46/199] installing ncurses-libs-5.7-3.2 [ 145s] [47/199] installing build-compare-2009.10.14-3.5 [ 146s] [48/199] installing libpthread-stubs-0.3-3.1 [ 146s] [49/199] installing qemu.x86_64-1.2-5.1 [ 151s] [50/199] installing xorg-x11-proto-core-7.0.25-3.1 [ 152s] [51/199] installing xorg-x11-proto-dmx-2.3.1-3.1 [ 152s] [52/199] installing xorg-x11-proto-input-2.2-3.1 [ 153s] [53/199] installing xorg-x11-proto-kb-1.0.6-3.1 [ 153s] [54/199] installing xorg-x11-proto-randr-1.4-3.1 [ 154s] [55/199] installing xorg-x11-proto-record-1.14.2-3.1 [ 154s] [56/199] installing xorg-x11-proto-renderproto-0.11.1-3.1 [ 154s] [57/199] installing xorg-x11-proto-video-2.3.1-3.1 [ 154s] [58/199] installing xorg-x11-proto-xext-7.2.1-3.1 [ 154s] [59/199] installing xorg-x11-proto-xf86dga-2.1-3.1 [ 154s] [60/199] installing xorg-x11-proto-xf86vidmode-2.3.1-3.1 [ 155s] [61/199] installing xorg-x11-proto-xinerama-1.2.1-3.1 [ 155s] [62/199] installing xorg-x11-xutils-dev-7.7-3.1 [ 155s] [63/199] installing eglibc-headers-2.13-3.9 [ 155s] [64/199] installing libcap-2.21-3.2 [ 155s] [65/199] installing unzip-6.0-3.4 [ 156s] [66/199] installing zlib-devel-1.2.5-3.8 [ 156s] [67/199] installing freetype-2.4.9-3.1 [ 156s] [68/199] installing grep-2.5.1a-3.1 [ 156s] [69/199] installing libacl-2.2.49-3.2 [ 156s] [70/199] installing libfile-5.04-3.2 [ 159s] [71/199] installing libxcb-1.8.1-3.1 [ 161s] [72/199] installing lzo-minilzo-2.03-3.3 [ 161s] [73/199] installing make-3.82-3.2 [ 162s] [74/199] installing mpfr-3.0.0-3.2 [ 162s] [75/199] installing ncurses-5.7-3.2 [ 163s] [76/199] installing bzip2-1.0.5-3.2 [ 163s] [77/199] installing libSM-1.2.1-3.1 [ 163s] [78/199] installing libblkid-2.20.2-3.1 [ 163s] [79/199] installing smack-utils-1.0+s14-3.2 [ 164s] [80/199] installing xz-5.0.3-3.3 [ 164s] [81/199] installing binutils-2.22-3.4 [ 165s] [82/199] installing elfutils-libs-0.152-3.8 [ 165s] [83/199] installing nss-3.12.9-3.11 [ 167s] [84/199] installing perl-5.12.1-3.3 [ 181s] [85/199] installing ncurses-base-5.7-3.2 [ 182s] [86/199] installing perl-HTML-Tagset-3.20-3.1 [ 182s] [87/199] installing perl-IO-Compress-Base-2.008-3.3 [ 184s] [88/199] installing perl-Module-Pluggable-3.60-3.3 [ 184s] [89/199] installing perl-Pod-Escapes-1.04-3.3 [ 184s] [90/199] installing perl-TimeDate-1.20-3.1 [ 184s] [91/199] installing eglibc-devel-2.13-3.9 [ 184s] [92/199] installing file-5.04-3.2 [ 184s] [93/199] installing libICE-devel-1.0.8-3.1 [ 185s] [94/199] installing libXau-devel-1.0.7-3.1 [ 185s] [95/199] installing lzo-devel-2.03-3.3 [ 185s] [96/199] installing perl-Compress-Raw-Zlib-2.008-3.3 [ 186s] [97/199] installing perl-devel-5.12.1-3.3 [ 187s] [98/199] installing perl-libs-5.12.1-3.3 [ 187s] [99/199] installing xcb-util-0.3.8-3.1 [ 187s] [100/199] installing coreutils-6.9-3.3 [ 189s] [101/199] installing freetype-devel-2.4.9-3.1 [ 189s] [102/199] installing libX11-1.5.0-3.1 [ 190s] [103/199] installing libmount-2.20.2-3.1 [ 190s] [104/199] installing mpc-0.9-3.2 [ 190s] [105/199] installing xz-lzma-compat-5.0.3-3.3 [ 191s] [106/199] installing elfutils-0.152-3.8 [ 191s] [107/199] installing nss-sysinit-3.12.9-3.11 [ 192s] [108/199] installing rpm-libs-4.9.1-4.1 [ 192s] [109/199] installing perl-ExtUtils-ParseXS-2.18-3.3 [ 192s] [110/199] installing perl-Pod-Simple-3.07-3.3 [ 193s] [111/199] installing perl-Test-Simple-0.80-3.3 [ 193s] [112/199] installing tizen-accelerator-1.0.1-3.1 [ 194s] [113/199] installing libXext-1.3.1-3.1 [ 194s] [114/199] installing libXrender-0.9.7-3.1 [ 195s] [115/199] installing perl-IO-Compress-Zlib-2.008-3.3 [ 195s] [116/199] installing perl-Test-Harness-3.12-3.3 [ 196s] [117/199] installing gawk-3.1.5-3.2 [ 196s] [118/199] installing gzip-1.3.12-3.1 [ 202s] [119/199] installing libSM-devel-1.2.1-3.1 [ 202s] [120/199] installing libxcb-devel-1.8.1-3.1 [ 203s] [121/199] installing build-2011.01.10a-3.1 [ 203s] [122/199] installing libXt-1.1.2-3.1 [ 203s] [123/199] installing rpm-4.9.1-4.1 [ 204s] [124/199] installing cpp-4.6.4-3.14 [ 205s] [125/199] installing util-linux-2.20.2-3.1 [ 213s] [126/199] installing fontconfig-2.9.0-3.1 [ 216s] /opt/var/cache/fontconfig/*: No such file or directory [ 216s] [127/199] installing bzip2-libs-x86-arm-1.0.5-2.1 [ 216s] [128/199] installing eglibc-x86-arm-2.13-2.3 [ 218s] [129/199] installing elfutils-libelf-x86-arm-0.152-2.1 [ 219s] [130/199] installing elfutils-libs-x86-arm-0.152-2.3 [ 220s] [131/199] installing fontconfig-devel-2.9.0-3.1 [ 220s] [132/199] installing gmp-x86-arm-4.2.1-2.1 [ 220s] [133/199] installing libacl-x86-arm-2.2.49-2.1 [ 220s] [134/199] installing libattr-x86-arm-2.4.44-2.1 [ 221s] [135/199] installing libcap-x86-arm-2.21-2.1 [ 221s] [136/199] installing libfile-x86-arm-5.04-2.2 [ 221s] [137/199] installing libgcc-x86-arm-4.6.4-2.1 [ 222s] [138/199] installing liblua-x86-arm-5.1.4-2.1 [ 222s] [139/199] installing mpc-x86-arm-0.9-2.1 [ 223s] [140/199] installing mpfr-x86-arm-3.0.0-2.1 [ 223s] [141/199] installing ncurses-libs-x86-arm-5.7-2.2 [ 223s] [142/199] installing nspr-x86-arm-4.9-2.3 [ 224s] [143/199] installing nss-softokn-freebl-x86-arm-3.12.9-2.3 [ 224s] [144/199] installing nss-x86-arm-3.12.9-2.3 [ 226s] [145/199] installing perl-ExtUtils-MakeMaker-6.36-3.3 [ 229s] [146/199] installing popt-x86-arm-1.16-2.1 [ 231s] [147/199] installing rpm-libs-x86-arm-4.9.1-2.2 [ 232s] [148/199] installing sqlite-x86-arm-3.7.13-2.1 [ 233s] [149/199] installing xcb-util-devel-0.3.8-3.1 [ 233s] [150/199] installing xz-libs-x86-arm-5.0.3-2.1 [ 233s] [151/199] installing zlib-x86-arm-1.2.5-2.1 [ 233s] [152/199] installing libXi-1.6.1-3.1 [ 234s] [153/199] installing libXinerama-1.1.2-3.1 [ 234s] [154/199] installing libXtst-1.2.0-3.1 [ 235s] [155/199] installing libXv-1.0.7-3.1 [ 235s] [156/199] installing libXxf86dga-1.1.3-3.1 [ 236s] [157/199] installing libXxf86vm-1.1.2-3.1 [ 236s] [158/199] installing libdmx-1.1.2-3.1 [ 237s] [159/199] installing libX11-devel-1.5.0-3.1 [ 238s] [160/199] installing libXmu-1.1.1-3.1 [ 239s] [161/199] installing libXrandr-1.4.0-3.1 [ 239s] [162/199] installing libXft-2.3.1-3.1 [ 253s] [163/199] installing gcc-4.6.4-3.14 [ 256s] [164/199] installing rpm-build-4.9.1-4.1 [ 256s] [165/199] installing perl-CPAN-1.9205-3.3 [ 258s] [166/199] installing bash-x86-arm-4.1-2.1 [ 260s] [167/199] installing fdupes-x86-arm-1.40-2.1 [ 260s] [168/199] installing findutils-x86-arm-4.2.31-2.1 [ 261s] [169/199] installing gawk-x86-arm-3.1.5-2.2 [ 262s] [170/199] installing gzip-x86-arm-1.3.12-2.1 [ 263s] [171/199] installing make-x86-arm-3.82-2.1 [ 273s] [172/199] installing sed-x86-arm-4.1.5-2.1 [ 273s] [173/199] installing tar-x86-arm-1.17-2.2 [ 274s] [174/199] installing diffutils-x86-arm-3.0-2.1 [ 274s] [175/199] installing libXext-devel-1.3.1-3.1 [ 274s] [176/199] installing libXrender-devel-0.9.7-3.1 [ 275s] [177/199] installing patch-x86-arm-2.6-2.1 [ 275s] [178/199] installing autoconf-2.68-3.1 [ 276s] [179/199] installing coreutils-x86-arm-6.9-2.1 [ 279s] [180/199] installing file-x86-arm-5.04-2.1 [ 279s] [181/199] installing libXt-devel-1.1.2-3.1 [ 279s] [182/199] installing elfutils-x86-arm-0.152-2.3 [ 280s] [183/199] installing gcc-c++-4.6.4-3.14 [ 280s] [184/199] installing rpm-x86-arm-4.9.1-2.2 [ 284s] /bin/rpm.orig-arm already present - skipping. [ 284s] /usr/bin/rpm2cpio.orig-arm already present - skipping. [ 284s] /usr/bin/rpmdb.orig-arm already present - skipping. [ 284s] /usr/bin/rpmquery.orig-arm already present - skipping. [ 284s] /usr/bin/rpmsign.orig-arm already present - skipping. [ 284s] /usr/bin/rpmverify.orig-arm already present - skipping. [ 284s] [185/199] installing rpm-build-x86-arm-4.9.1-2.2 [ 284s] [186/199] installing automake-1.11.1-3.1 [ 285s] [187/199] installing libXinerama-devel-1.1.2-3.1 [ 288s] [188/199] installing libXxf86dga-devel-1.1.3-3.1 [ 288s] [189/199] installing libXxf86vm-devel-1.1.2-3.1 [ 288s] [190/199] installing libdmx-devel-1.1.2-3.1 [ 289s] [191/199] installing libXft-devel-2.3.1-3.1 [ 290s] [192/199] installing libXmu-devel-1.1.1-3.1 [ 290s] [193/199] installing libXv-devel-1.0.7-3.1 [ 290s] [194/199] installing libXi-devel-1.6.1-3.1 [ 291s] [195/199] installing libXrandr-devel-1.4.0-3.1 [ 292s] [196/199] installing cross-armv7l-gcc-accel-x86-armv7l-4.6.4-3.4 [ 300s] "GCCVER: 4.6.4 GCCVER_NEW: 4.6.4 " [ 300s] GCC and GCC-accel versions match. Enabling cross-compiler. [ 301s] [197/199] installing libtool-2.2.6b-3.2 [ 302s] [198/199] installing cross-armv7l-binutils-accel-x86-armv7l-2.22-3.1 [ 304s] [199/199] installing libXtst-devel-1.2.0-3.1 [ 304s] removing nis flags from //etc/nsswitch.conf... [ 304s] now finalizing build dir... [ 304s] /.build/build: line 2585: mount: command not found [ 304s] /.build/build: line 2586: mount: command not found [ 312s] build target is armv7l-tizen-linux [ 312s] ----------------------------------------------------------------- [ 312s] I have the following modifications for xorg-x11-utils.spec: [ 312s] 7c7 [ 312s] < Release: 6 [ 312s] --- [ 312s] > Release: 3.1 [ 312s] ----------------------------------------------------------------- [ 312s] ----- building xorg-x11-utils.spec (user abuild) [ 312s] ----------------------------------------------------------------- [ 312s] ----------------------------------------------------------------- [ 312s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define 'disturl obs://build.tizen.org/Tizen:2.3:Wearable/target/c3428952408b87ea9a2eca764d77b04d-xorg-x11-utils' /home/abuild/rpmbuild/SOURCES/xorg-x11-utils.spec [ 312s] Building target platforms: armv7l-tizen-linux [ 312s] Building for target armv7l-tizen-linux [ 312s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.QfnTg6 [ 312s] + umask 022 [ 312s] + cd /home/abuild/rpmbuild/BUILD [ 312s] + LANG=C [ 312s] + export LANG [ 312s] + unset DISPLAY [ 312s] + cd /home/abuild/rpmbuild/BUILD [ 312s] + rm -rf xorg-x11-utils-7.5.1 [ 312s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xorg-x11-utils-7.5.1.tar.gz [ 312s] + /bin/tar -xf - [ 312s] + STATUS=0 [ 312s] + '[' 0 -ne 0 ']' [ 312s] + cd xorg-x11-utils-7.5.1 [ 312s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 312s] + exit 0 [ 312s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.KP0kja [ 312s] + umask 022 [ 312s] + cd /home/abuild/rpmbuild/BUILD [ 312s] + cd xorg-x11-utils-7.5.1 [ 312s] + LANG=C [ 312s] + export LANG [ 312s] + unset DISPLAY [ 312s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 312s] + export CFLAGS [ 312s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 312s] + export CXXFLAGS [ 312s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 312s] + export FFLAGS [ 312s] + LD_AS_NEEDED=1 [ 312s] + export LD_AS_NEEDED [ 312s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 312s] + pushd xdpyinfo [ 312s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 312s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 312s] + export CFLAGS [ 312s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 312s] + export CXXFLAGS [ 312s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 312s] + export FFLAGS [ 312s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 312s] configure: WARNING: unrecognized options: --disable-xprint [ 312s] checking for a BSD-compatible install... /usr/bin/install -c [ 313s] checking whether build environment is sane... yes [ 313s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 313s] checking for gawk... gawk [ 313s] checking whether make sets $(MAKE)... yes [ 313s] checking whether to enable maintainer-specific portions of Makefiles... no [ 313s] checking for style of include used by make... GNU [ 313s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 313s] checking for gcc... gcc [ 314s] checking whether the C compiler works... yes [ 314s] checking for C compiler default output file name... a.out [ 314s] checking for suffix of executables... [ 314s] checking whether we are cross compiling... no [ 314s] checking for suffix of object files... o [ 314s] checking whether we are using the GNU C compiler... yes [ 314s] checking whether gcc accepts -g... yes [ 314s] checking for gcc option to accept ISO C89... none needed [ 314s] checking dependency style of gcc... gcc3 [ 314s] checking for gcc option to accept ISO C99... -std=gnu99 [ 314s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 314s] checking for grep that handles long lines and -e... /bin/grep [ 314s] checking for egrep... /bin/grep -E [ 314s] checking for ANSI C header files... yes [ 314s] checking for sys/types.h... yes [ 314s] checking for sys/stat.h... yes [ 314s] checking for stdlib.h... yes [ 314s] checking for string.h... yes [ 314s] checking for memory.h... yes [ 315s] checking for strings.h... yes [ 315s] checking for inttypes.h... yes [ 315s] checking for stdint.h... yes [ 315s] checking for unistd.h... yes [ 315s] checking whether __clang__ is declared... no [ 315s] checking whether __INTEL_COMPILER is declared... no [ 315s] checking whether __SUNPRO_C is declared... no [ 315s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 315s] checking for pkg-config... /usr/bin/pkg-config [ 315s] checking pkg-config is at least version 0.9.0... yes [ 315s] checking build system type... armv7l-unknown-linux-gnueabi [ 315s] checking host system type... armv7l-unknown-linux-gnueabi [ 315s] checking for a sed that does not truncate output... /bin/sed [ 315s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 315s] checking for XDPYINFO... yes [ 315s] checking for DPY_X11... yes [ 315s] checking for DPY_XEXT... yes [ 315s] checking for X11/extensions/multibuf.h... yes [ 315s] checking for X11/extensions/XShm.h... yes [ 315s] checking for DPY_XKB... yes [ 315s] checking for X11/extensions/XKB.h... yes [ 315s] checking for X11/XKBlib.h... yes [ 316s] checking for DPY_XF86VIDMODE... yes [ 316s] checking for X11/extensions/xf86vmode.h... yes [ 316s] checking for X11/extensions/xf86vmstr.h... yes [ 316s] checking for X11/extensions/xf86vmproto.h... yes [ 316s] checking for DPY_XF86DGA... yes [ 316s] checking for X11/extensions/Xxf86dga.h... yes [ 316s] checking for X11/extensions/xf86dgaproto.h... yes [ 316s] checking for X11/extensions/xf86dga.h... yes [ 316s] checking for X11/extensions/xf86dgastr.h... yes [ 316s] checking for DPY_XF86MISC... no [ 316s] not found [ 316s] checking for DPY_XINPUT... yes [ 316s] checking for X11/extensions/XInput.h... yes [ 316s] checking for DPY_XRENDER... yes [ 316s] checking for X11/extensions/Xrender.h... yes [ 316s] checking for DPY_XCOMPOSITE... no [ 316s] not found [ 316s] checking for DPY_XINERAMA... yes [ 316s] checking for X11/extensions/Xinerama.h... yes [ 317s] checking for DPY_DMX... yes [ 317s] checking for X11/extensions/dmxext.h... yes [ 317s] checking for DPY_XTST... yes [ 317s] checking for X11/extensions/record.h... yes [ 317s] configure: creating ./config.status [ 317s] config.status: creating Makefile [ 317s] config.status: creating man/Makefile [ 317s] config.status: creating config.h [ 317s] config.status: executing depfiles commands [ 317s] configure: WARNING: unrecognized options: --disable-xprint [ 317s] + popd [ 317s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 317s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 317s] + pushd xev [ 317s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 317s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 317s] + export CFLAGS [ 317s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 317s] + export CXXFLAGS [ 317s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 317s] + export FFLAGS [ 317s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 317s] configure: WARNING: unrecognized options: --disable-xprint [ 317s] checking for a BSD-compatible install... /usr/bin/install -c [ 318s] checking whether build environment is sane... yes [ 318s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 318s] checking for gawk... gawk [ 318s] checking whether make sets $(MAKE)... yes [ 318s] checking whether to enable maintainer-specific portions of Makefiles... no [ 318s] checking for style of include used by make... GNU [ 318s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 318s] checking for gcc... gcc [ 318s] checking whether the C compiler works... yes [ 318s] checking for C compiler default output file name... a.out [ 318s] checking for suffix of executables... [ 318s] checking whether we are cross compiling... no [ 319s] checking for suffix of object files... o [ 319s] checking whether we are using the GNU C compiler... yes [ 319s] checking whether gcc accepts -g... yes [ 319s] checking for gcc option to accept ISO C89... none needed [ 319s] checking dependency style of gcc... gcc3 [ 319s] checking for gcc option to accept ISO C99... -std=gnu99 [ 319s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 319s] checking for grep that handles long lines and -e... /bin/grep [ 319s] checking for egrep... /bin/grep -E [ 319s] checking for ANSI C header files... yes [ 319s] checking for sys/types.h... yes [ 319s] checking for sys/stat.h... yes [ 319s] checking for stdlib.h... yes [ 319s] checking for string.h... yes [ 319s] checking for memory.h... yes [ 319s] checking for strings.h... yes [ 319s] checking for inttypes.h... yes [ 319s] checking for stdint.h... yes [ 319s] checking for unistd.h... yes [ 319s] checking whether __clang__ is declared... no [ 319s] checking whether __INTEL_COMPILER is declared... no [ 320s] checking whether __SUNPRO_C is declared... no [ 320s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 320s] checking for pkg-config... /usr/bin/pkg-config [ 320s] checking pkg-config is at least version 0.9.0... yes [ 320s] checking build system type... armv7l-unknown-linux-gnueabi [ 320s] checking host system type... armv7l-unknown-linux-gnueabi [ 320s] checking for a sed that does not truncate output... /bin/sed [ 320s] checking if gcc -std=gnu99 supports -Werror=unknown-warning-option... no [ 320s] checking if gcc -std=gnu99 supports -Werror=unused-command-line-argument... no [ 320s] checking if gcc -std=gnu99 supports -Wall... yes [ 320s] checking if gcc -std=gnu99 supports -Wpointer-arith... yes [ 320s] checking if gcc -std=gnu99 supports -Wstrict-prototypes... yes [ 320s] checking if gcc -std=gnu99 supports -Wmissing-prototypes... yes [ 320s] checking if gcc -std=gnu99 supports -Wmissing-declarations... yes [ 320s] checking if gcc -std=gnu99 supports -Wnested-externs... yes [ 320s] checking if gcc -std=gnu99 supports -Wbad-function-cast... yes [ 320s] checking if gcc -std=gnu99 supports -Wformat=2... yes [ 320s] checking if gcc -std=gnu99 supports -Wold-style-definition... yes [ 320s] checking if gcc -std=gnu99 supports -Wdeclaration-after-statement... yes [ 320s] checking if gcc -std=gnu99 supports -Wunused... yes [ 320s] checking if gcc -std=gnu99 supports -Wuninitialized... yes [ 320s] checking if gcc -std=gnu99 supports -Wshadow... yes [ 320s] checking if gcc -std=gnu99 supports -Wcast-qual... yes [ 320s] checking if gcc -std=gnu99 supports -Wmissing-noreturn... yes [ 320s] checking if gcc -std=gnu99 supports -Wmissing-format-attribute... yes [ 320s] checking if gcc -std=gnu99 supports -Wredundant-decls... yes [ 320s] checking if gcc -std=gnu99 supports -Werror=implicit... yes [ 320s] checking if gcc -std=gnu99 supports -Werror=nonnull... yes [ 320s] checking if gcc -std=gnu99 supports -Werror=init-self... yes [ 320s] checking if gcc -std=gnu99 supports -Werror=main... yes [ 320s] checking if gcc -std=gnu99 supports -Werror=missing-braces... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=sequence-point... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=return-type... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=trigraphs... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=array-bounds... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=write-strings... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=address... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=int-to-pointer-cast... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=pointer-to-int-cast... yes [ 321s] checking if gcc -std=gnu99 supports -pedantic... yes [ 321s] checking if gcc -std=gnu99 supports -Werror... yes [ 321s] checking if gcc -std=gnu99 supports -Werror=attributes... yes [ 321s] checking for XEV... yes [ 321s] configure: creating ./config.status [ 321s] config.status: creating Makefile [ 321s] config.status: creating man/Makefile [ 321s] config.status: creating config.h [ 321s] config.status: executing depfiles commands [ 321s] configure: WARNING: unrecognized options: --disable-xprint [ 321s] + popd [ 321s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 321s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 321s] + pushd xprop [ 321s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 321s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 321s] + export CFLAGS [ 321s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 321s] + export CXXFLAGS [ 321s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 321s] + export FFLAGS [ 321s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 321s] configure: WARNING: unrecognized options: --disable-xprint [ 322s] checking for a BSD-compatible install... /usr/bin/install -c [ 323s] checking whether build environment is sane... yes [ 323s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 323s] checking for gawk... gawk [ 323s] checking whether make sets $(MAKE)... yes [ 323s] checking whether to enable maintainer-specific portions of Makefiles... no [ 323s] checking for style of include used by make... GNU [ 323s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 323s] checking for gcc... gcc [ 323s] checking whether the C compiler works... yes [ 323s] checking for C compiler default output file name... a.out [ 323s] checking for suffix of executables... [ 323s] checking whether we are cross compiling... no [ 323s] checking for suffix of object files... o [ 323s] checking whether we are using the GNU C compiler... yes [ 323s] checking whether gcc accepts -g... yes [ 323s] checking for gcc option to accept ISO C89... none needed [ 323s] checking dependency style of gcc... gcc3 [ 323s] checking for gcc option to accept ISO C99... -std=gnu99 [ 323s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 323s] checking for grep that handles long lines and -e... /bin/grep [ 323s] checking for egrep... /bin/grep -E [ 323s] checking for ANSI C header files... yes [ 323s] checking for sys/types.h... yes [ 323s] checking for sys/stat.h... yes [ 323s] checking for stdlib.h... yes [ 323s] checking for string.h... yes [ 324s] checking for memory.h... yes [ 324s] checking for strings.h... yes [ 324s] checking for inttypes.h... yes [ 324s] checking for stdint.h... yes [ 324s] checking for unistd.h... yes [ 324s] checking whether __clang__ is declared... no [ 324s] checking whether __INTEL_COMPILER is declared... no [ 324s] checking whether __SUNPRO_C is declared... no [ 324s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 324s] checking for pkg-config... /usr/bin/pkg-config [ 324s] checking pkg-config is at least version 0.9.0... yes [ 324s] checking build system type... armv7l-unknown-linux-gnueabi [ 324s] checking host system type... armv7l-unknown-linux-gnueabi [ 324s] checking for a sed that does not truncate output... /bin/sed [ 324s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 324s] checking wchar.h usability... yes [ 324s] checking wchar.h presence... yes [ 324s] checking for wchar.h... yes [ 324s] checking wctype.h usability... yes [ 324s] checking wctype.h presence... yes [ 324s] checking for wctype.h... yes [ 324s] checking langinfo.h usability... yes [ 324s] checking langinfo.h presence... yes [ 324s] checking for langinfo.h... yes [ 324s] checking for XPROP... yes [ 324s] configure: creating ./config.status [ 324s] config.status: creating Makefile [ 324s] config.status: creating man/Makefile [ 324s] config.status: creating config.h [ 324s] config.status: executing depfiles commands [ 324s] configure: WARNING: unrecognized options: --disable-xprint [ 325s] + popd [ 325s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 325s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 325s] + pushd xvinfo [ 325s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 325s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 325s] + export CFLAGS [ 325s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 325s] + export CXXFLAGS [ 325s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 325s] + export FFLAGS [ 325s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 325s] configure: WARNING: unrecognized options: --disable-xprint [ 325s] checking for a BSD-compatible install... /usr/bin/install -c [ 326s] checking whether build environment is sane... yes [ 326s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 326s] checking for gawk... gawk [ 326s] checking whether make sets $(MAKE)... yes [ 326s] checking whether to enable maintainer-specific portions of Makefiles... no [ 326s] checking for style of include used by make... GNU [ 326s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 326s] checking for gcc... gcc [ 326s] checking whether the C compiler works... yes [ 326s] checking for C compiler default output file name... a.out [ 326s] checking for suffix of executables... [ 326s] checking whether we are cross compiling... no [ 326s] checking for suffix of object files... o [ 326s] checking whether we are using the GNU C compiler... yes [ 326s] checking whether gcc accepts -g... yes [ 326s] checking for gcc option to accept ISO C89... none needed [ 326s] checking dependency style of gcc... gcc3 [ 326s] checking for gcc option to accept ISO C99... -std=gnu99 [ 326s] checking how to run the C preprocessor... gcc -std=gnu99 -E [ 326s] checking for grep that handles long lines and -e... /bin/grep [ 326s] checking for egrep... /bin/grep -E [ 327s] checking for ANSI C header files... yes [ 327s] checking for sys/types.h... yes [ 327s] checking for sys/stat.h... yes [ 327s] checking for stdlib.h... yes [ 327s] checking for string.h... yes [ 327s] checking for memory.h... yes [ 327s] checking for strings.h... yes [ 327s] checking for inttypes.h... yes [ 327s] checking for stdint.h... yes [ 327s] checking for unistd.h... yes [ 327s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 327s] checking for pkg-config... /usr/bin/pkg-config [ 327s] checking pkg-config is at least version 0.9.0... yes [ 327s] checking build system type... armv7l-unknown-linux-gnueabi [ 327s] checking host system type... armv7l-unknown-linux-gnueabi [ 327s] checking for a sed that does not truncate output... /bin/sed [ 327s] checking for XVINFO... yes [ 327s] configure: creating ./config.status [ 327s] config.status: creating Makefile [ 327s] config.status: creating config.h [ 327s] config.status: executing depfiles commands [ 327s] configure: WARNING: unrecognized options: --disable-xprint [ 327s] + popd [ 327s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 327s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 327s] + pushd xwininfo [ 327s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 327s] + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 327s] + export CFLAGS [ 327s] + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb' [ 327s] + export CXXFLAGS [ 327s] + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security -Wl,--as-needed -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -mthumb -Wa,-mimplicit-it=thumb -I%_fmoddir' [ 327s] + export FFLAGS [ 327s] + ./configure --build=armv7l-unknown-linux-gnueabi --host=armv7l-unknown-linux-gnueabi --target=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/lib --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-xprint RSH=rsh MANCONF=/etc/manpath.config [ 327s] configure: WARNING: unrecognized options: --disable-xprint [ 328s] checking for a BSD-compatible install... /usr/bin/install -c [ 329s] checking whether build environment is sane... yes [ 329s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 329s] checking for gawk... gawk [ 329s] checking whether make sets $(MAKE)... yes [ 329s] checking whether to enable maintainer-specific portions of Makefiles... no [ 329s] checking for style of include used by make... GNU [ 329s] checking for armv7l-unknown-linux-gnueabi-gcc... no [ 329s] checking for gcc... gcc [ 329s] checking whether the C compiler works... yes [ 329s] checking for C compiler default output file name... a.out [ 329s] checking for suffix of executables... [ 329s] checking whether we are cross compiling... no [ 329s] checking for suffix of object files... o [ 329s] checking whether we are using the GNU C compiler... yes [ 329s] checking whether gcc accepts -g... yes [ 329s] checking for gcc option to accept ISO C89... none needed [ 329s] checking dependency style of gcc... gcc3 [ 329s] checking how to run the C preprocessor... gcc -E [ 329s] checking for grep that handles long lines and -e... /bin/grep [ 329s] checking for egrep... /bin/grep -E [ 329s] checking for ANSI C header files... yes [ 329s] checking for sys/types.h... yes [ 329s] checking for sys/stat.h... yes [ 329s] checking for stdlib.h... yes [ 329s] checking for string.h... yes [ 329s] checking for memory.h... yes [ 329s] checking for strings.h... yes [ 329s] checking for inttypes.h... yes [ 329s] checking for stdint.h... yes [ 330s] checking for unistd.h... yes [ 330s] checking minix/config.h usability... no [ 330s] checking minix/config.h presence... no [ 330s] checking for minix/config.h... no [ 330s] checking whether it is safe to define __EXTENSIONS__... yes [ 330s] checking for gcc option to accept ISO C99... -std=gnu99 [ 330s] checking whether __clang__ is declared... no [ 330s] checking whether __INTEL_COMPILER is declared... no [ 330s] checking whether __SUNPRO_C is declared... no [ 330s] checking for armv7l-unknown-linux-gnueabi-pkg-config... no [ 330s] checking for pkg-config... /usr/bin/pkg-config [ 330s] checking pkg-config is at least version 0.9.0... yes [ 330s] checking build system type... armv7l-unknown-linux-gnueabi [ 330s] checking host system type... armv7l-unknown-linux-gnueabi [ 330s] checking for a sed that does not truncate output... /bin/sed [ 330s] checking if gcc -std=gnu99 supports -Werror=attributes... no [ 330s] checking for strlcat... no [ 330s] checking for working strnlen... yes [ 330s] checking for library containing iconv... none required [ 330s] checking whether to use xcb-icccm library... no [ 330s] checking for XWININFO... yes [ 330s] checking for XLIB... yes [ 330s] configure: creating ./config.status [ 331s] config.status: creating Makefile [ 331s] config.status: creating man/Makefile [ 331s] config.status: creating config.h [ 331s] config.status: executing depfiles commands [ 331s] configure: WARNING: unrecognized options: --disable-xprint [ 331s] + popd [ 331s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 331s] + exit 0 [ 331s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.u9zaTm [ 331s] + umask 022 [ 331s] + cd /home/abuild/rpmbuild/BUILD [ 331s] + cd xorg-x11-utils-7.5.1 [ 331s] + LANG=C [ 331s] + export LANG [ 331s] + unset DISPLAY [ 331s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 331s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 331s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 331s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/license [ 331s] + cp -af COPYING /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/license/xorg-x11-utils [ 331s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 331s] + pushd xdpyinfo [ 331s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 331s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 331s] Making install in man [ 331s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 331s] GEN xdpyinfo.1 [ 331s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 331s] make[2]: Nothing to be done for `install-exec-am'. [ 331s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1" [ 331s] /usr/bin/install -c -m 644 xdpyinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1' [ 331s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 331s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo/man' [ 331s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 331s] CC xdpyinfo.o [ 331s] CCLD xdpyinfo [ 331s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 331s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin" [ 331s] /usr/bin/install -c xdpyinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin' [ 331s] make[2]: Nothing to be done for `install-data-am'. [ 331s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 331s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xdpyinfo' [ 331s] + popd [ 331s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 331s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 331s] + pushd xev [ 331s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 331s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 331s] Making install in man [ 331s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 331s] GEN xev.1 [ 331s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 331s] make[2]: Nothing to be done for `install-exec-am'. [ 331s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1" [ 331s] /usr/bin/install -c -m 644 xev.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1' [ 331s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 331s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev/man' [ 331s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 331s] CC xev.o [ 332s] CCLD xev [ 332s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 332s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin" [ 332s] /usr/bin/install -c xev '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin' [ 332s] make[2]: Nothing to be done for `install-data-am'. [ 332s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 332s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xev' [ 332s] + popd [ 332s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 332s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 332s] + pushd xprop [ 332s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 332s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 332s] Making install in man [ 332s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 332s] GEN xprop.1 [ 332s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 332s] make[2]: Nothing to be done for `install-exec-am'. [ 332s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1" [ 332s] /usr/bin/install -c -m 644 xprop.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1' [ 332s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 332s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop/man' [ 332s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 332s] CC dsimple.o [ 332s] CC clientwin.o [ 332s] CC xprop.o [ 332s] CCLD xprop [ 332s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 332s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin" [ 332s] /usr/bin/install -c xprop '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin' [ 332s] make[2]: Nothing to be done for `install-data-am'. [ 332s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 332s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xprop' [ 332s] + popd [ 332s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 332s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 332s] + pushd xvinfo [ 332s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 332s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 332s] CC xvinfo.o [ 332s] xvinfo.c: In function 'main': [ 332s] xvinfo.c:124:9: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] [ 333s] CCLD xvinfo [ 333s] GEN xvinfo.1 [ 333s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo' [ 333s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin" [ 333s] /usr/bin/install -c xvinfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin' [ 333s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1" [ 333s] /usr/bin/install -c -m 644 xvinfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1' [ 333s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xvinfo' [ 333s] + popd [ 333s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 333s] + for app in xdpyinfo xev xprop xvinfo xwininfo [ 333s] + pushd xwininfo [ 333s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 333s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 333s] Making install in man [ 333s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 333s] GEN xwininfo.1 [ 333s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 333s] make[2]: Nothing to be done for `install-exec-am'. [ 333s] test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1" [ 333s] /usr/bin/install -c -m 644 xwininfo.1 '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man/man1' [ 333s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 333s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo/man' [ 333s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 333s] CC clientwin.o [ 333s] CC dsimple.o [ 333s] CC xwininfo.o [ 333s] xwininfo.c: In function 'main': [ 333s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 333s] xwininfo.c:584:6: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 333s] xwininfo.c: In function 'Display_Window_Id': [ 333s] xwininfo.c:797:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 333s] xwininfo.c: In function 'print_friendly_name': [ 333s] xwininfo.c:1970:5: warning: format not a string literal, argument types not checked [-Wformat-nonliteral] [ 333s] CCLD xwininfo [ 333s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 333s] test -z "/usr/bin" || /bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin" [ 333s] /usr/bin/install -c xwininfo '/home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin' [ 333s] make[2]: Nothing to be done for `install-data-am'. [ 333s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 333s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1/xwininfo' [ 333s] + popd [ 333s] ~/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/info [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/doc [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/doc/xorg-x11-utils [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/gtk-doc [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/share/man [ 333s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm -regex '.*/man/man./.*.[0-9]' [ 333s] + xargs rm -f -- [ 333s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm -regex '.*/man/../man./.*.[0-9]' [ 333s] + xargs rm -f -- [ 333s] + find /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 333s] + xargs rm -f -- [ 334s] + /usr/lib/rpm/find-debuginfo.sh --strict-build-id /home/abuild/rpmbuild/BUILD/xorg-x11-utils-7.5.1 [ 334s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin/xwininfo [ 334s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin/xprop [ 334s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin/xdpyinfo [ 334s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin/xev [ 334s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm/usr/bin/xvinfo [ 334s] 476 blocks [ 334s] + /usr/lib/rpm/check-buildroot [ 334s] + /usr/lib/rpm//brp-compress [ 334s] + /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip [ 334s] + /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump [ 334s] + /usr/lib/rpm/brp-python-hardlink [ 334s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 334s] Processing files: xorg-x11-utils-7.5.1-3.1.armv7l [ 334s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 334s] bWFpbiBuYW1lPSJfIi8+CiAgICAgICAgPC9yZXF1ZXN0PgogICAgICAgIDxhc3Np [ 334s] Z24+CiAgICAgICAgICAgICAgICA8ZmlsZXN5c3RlbSBwYXRoPSIvdXNyL2Jpbi8q [ 334s] IiBsYWJlbD0iXyIgZXhlY19sYWJlbD0ibm9uZSIgLz4KICAgICAgICA8L2Fzc2ln [ 334s] bj4KPC9tYW5pZmVzdD4K [ 334s] [ 335s] Provides: edid-decode xdpyinfo xev xprop xvinfo xwininfo [ 335s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 335s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libX11-xcb.so.1 libX11.so.6 libXext.so.6 libXi.so.6 libXinerama.so.1 libXrandr.so.2 libXrender.so.1 libXtst.so.6 libXv.so.1 libXxf86dga.so.1 libXxf86vm.so.1 libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libdmx.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libxcb-shape.so.0 libxcb.so.1 [ 335s] Processing files: xorg-x11-utils-debuginfo-7.5.1-3.1.armv7l [ 335s] Processing files: xorg-x11-utils-debugsource-7.5.1-3.1.armv7l [ 335s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 335s] Wrote: /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5.1-3.1.src.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-7.5.1-3.1.armv7l.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debuginfo-7.5.1-3.1.armv7l.rpm [ 335s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debugsource-7.5.1-3.1.armv7l.rpm [ 335s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6gsuSy [ 335s] + umask 022 [ 335s] + cd /home/abuild/rpmbuild/BUILD [ 335s] + cd xorg-x11-utils-7.5.1 [ 335s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 335s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xorg-x11-utils-7.5.1-3.1.arm [ 335s] + exit 0 [ 335s] ... checking for files with abuild user/group [ 335s] ... creating baselibs [ 336s] ... saving built statistics [ 336s] /.build/build: line 3144: mount: command not found [ 336s] ERROR: no root disk device found, yet another new device name? [ 336s] ls: cannot access /sys/block/: No such file or directory [ 336s] /.build/build: line 3159: umount: command not found [ 336s] ... saving built packages [ 336s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-7.5.1-3.1.armv7l.rpm [ 336s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debuginfo-7.5.1-3.1.armv7l.rpm [ 336s] /home/abuild/rpmbuild/RPMS/armv7l/xorg-x11-utils-debugsource-7.5.1-3.1.armv7l.rpm [ 336s] /home/abuild/rpmbuild/SRPMS/xorg-x11-utils-7.5.1-3.1.src.rpm [ 336s] /home/abuild/rpmbuild/OTHER/_statistics [ 336s] [ 336s] w17 finished "build xorg-x11-utils.spec" at Wed Feb 4 12:43:45 UTC 2015. [ 336s] [ 337s] /.build/build: line 368: 255 Killed background_monitor_process [ 339s] [ 319.279951] SysRq : Power Off [ 339s] [ 319.292323] Power down. [ 340s] build: extracting built packages... [ 340s] xorg-x11-utils-7.5.1-3.1.armv7l.rpm [ 340s] xorg-x11-utils-debuginfo-7.5.1-3.1.armv7l.rpm [ 340s] xorg-x11-utils-debugsource-7.5.1-3.1.armv7l.rpm [ 340s] xorg-x11-utils-7.5.1-3.1.src.rpm [ 340s] _statistics Retried build at Thu Feb 5 21:08:58 2015 returned same result, skipped